xref: /linux/drivers/gpu/drm/amd/include/kgd_kfd_interface.h (revision 9f2c9170934eace462499ba0bfe042cc72900173)
1 /*
2  * Copyright 2014 Advanced Micro Devices, Inc.
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  * and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice shall be included in
12  * all copies or substantial portions of the Software.
13  *
14  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
17  * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20  * OTHER DEALINGS IN THE SOFTWARE.
21  */
22 
23 /*
24  * This file defines the private interface between the
25  * AMD kernel graphics drivers and the AMD KFD.
26  */
27 
28 #ifndef KGD_KFD_INTERFACE_H_INCLUDED
29 #define KGD_KFD_INTERFACE_H_INCLUDED
30 
31 #include <linux/types.h>
32 #include <linux/bitmap.h>
33 #include <linux/dma-fence.h>
34 
35 struct pci_dev;
36 struct amdgpu_device;
37 
38 #define KGD_MAX_QUEUES 128
39 
40 struct kfd_dev;
41 struct kgd_mem;
42 
43 enum kfd_preempt_type {
44 	KFD_PREEMPT_TYPE_WAVEFRONT_DRAIN = 0,
45 	KFD_PREEMPT_TYPE_WAVEFRONT_RESET,
46 	KFD_PREEMPT_TYPE_WAVEFRONT_SAVE
47 };
48 
49 struct kfd_vm_fault_info {
50 	uint64_t	page_addr;
51 	uint32_t	vmid;
52 	uint32_t	mc_id;
53 	uint32_t	status;
54 	bool		prot_valid;
55 	bool		prot_read;
56 	bool		prot_write;
57 	bool		prot_exec;
58 };
59 
60 struct kfd_cu_info {
61 	uint32_t num_shader_engines;
62 	uint32_t num_shader_arrays_per_engine;
63 	uint32_t num_cu_per_sh;
64 	uint32_t cu_active_number;
65 	uint32_t cu_ao_mask;
66 	uint32_t simd_per_cu;
67 	uint32_t max_waves_per_simd;
68 	uint32_t wave_front_size;
69 	uint32_t max_scratch_slots_per_cu;
70 	uint32_t lds_size;
71 	uint32_t cu_bitmap[4][4];
72 };
73 
74 /* For getting GPU local memory information from KGD */
75 struct kfd_local_mem_info {
76 	uint64_t local_mem_size_private;
77 	uint64_t local_mem_size_public;
78 	uint32_t vram_width;
79 	uint32_t mem_clk_max;
80 };
81 
82 enum kgd_memory_pool {
83 	KGD_POOL_SYSTEM_CACHEABLE = 1,
84 	KGD_POOL_SYSTEM_WRITECOMBINE = 2,
85 	KGD_POOL_FRAMEBUFFER = 3,
86 };
87 
88 /**
89  * enum kfd_sched_policy
90  *
91  * @KFD_SCHED_POLICY_HWS: H/W scheduling policy known as command processor (cp)
92  * scheduling. In this scheduling mode we're using the firmware code to
93  * schedule the user mode queues and kernel queues such as HIQ and DIQ.
94  * the HIQ queue is used as a special queue that dispatches the configuration
95  * to the cp and the user mode queues list that are currently running.
96  * the DIQ queue is a debugging queue that dispatches debugging commands to the
97  * firmware.
98  * in this scheduling mode user mode queues over subscription feature is
99  * enabled.
100  *
101  * @KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION: The same as above but the over
102  * subscription feature disabled.
103  *
104  * @KFD_SCHED_POLICY_NO_HWS: no H/W scheduling policy is a mode which directly
105  * set the command processor registers and sets the queues "manually". This
106  * mode is used *ONLY* for debugging proposes.
107  *
108  */
109 enum kfd_sched_policy {
110 	KFD_SCHED_POLICY_HWS = 0,
111 	KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION,
112 	KFD_SCHED_POLICY_NO_HWS
113 };
114 
115 struct kgd2kfd_shared_resources {
116 	/* Bit n == 1 means VMID n is available for KFD. */
117 	unsigned int compute_vmid_bitmap;
118 
119 	/* number of pipes per mec */
120 	uint32_t num_pipe_per_mec;
121 
122 	/* number of queues per pipe */
123 	uint32_t num_queue_per_pipe;
124 
125 	/* Bit n == 1 means Queue n is available for KFD */
126 	DECLARE_BITMAP(cp_queue_bitmap, KGD_MAX_QUEUES);
127 
128 	/* SDMA doorbell assignments (SOC15 and later chips only). Only
129 	 * specific doorbells are routed to each SDMA engine. Others
130 	 * are routed to IH and VCN. They are not usable by the CP.
131 	 */
132 	uint32_t *sdma_doorbell_idx;
133 
134 	/* From SOC15 onward, the doorbell index range not usable for CP
135 	 * queues.
136 	 */
137 	uint32_t non_cp_doorbells_start;
138 	uint32_t non_cp_doorbells_end;
139 
140 	/* Base address of doorbell aperture. */
141 	phys_addr_t doorbell_physical_address;
142 
143 	/* Size in bytes of doorbell aperture. */
144 	size_t doorbell_aperture_size;
145 
146 	/* Number of bytes at start of aperture reserved for KGD. */
147 	size_t doorbell_start_offset;
148 
149 	/* GPUVM address space size in bytes */
150 	uint64_t gpuvm_size;
151 
152 	/* Minor device number of the render node */
153 	int drm_render_minor;
154 
155 	bool enable_mes;
156 };
157 
158 struct tile_config {
159 	uint32_t *tile_config_ptr;
160 	uint32_t *macro_tile_config_ptr;
161 	uint32_t num_tile_configs;
162 	uint32_t num_macro_tile_configs;
163 
164 	uint32_t gb_addr_config;
165 	uint32_t num_banks;
166 	uint32_t num_ranks;
167 };
168 
169 #define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT 4096
170 
171 /**
172  * struct kfd2kgd_calls
173  *
174  * @program_sh_mem_settings: A function that should initiate the memory
175  * properties such as main aperture memory type (cache / non cached) and
176  * secondary aperture base address, size and memory type.
177  * This function is used only for no cp scheduling mode.
178  *
179  * @set_pasid_vmid_mapping: Exposes pasid/vmid pair to the H/W for no cp
180  * scheduling mode. Only used for no cp scheduling mode.
181  *
182  * @hqd_load: Loads the mqd structure to a H/W hqd slot. used only for no cp
183  * sceduling mode.
184  *
185  * @hqd_sdma_load: Loads the SDMA mqd structure to a H/W SDMA hqd slot.
186  * used only for no HWS mode.
187  *
188  * @hqd_dump: Dumps CPC HQD registers to an array of address-value pairs.
189  * Array is allocated with kmalloc, needs to be freed with kfree by caller.
190  *
191  * @hqd_sdma_dump: Dumps SDMA HQD registers to an array of address-value pairs.
192  * Array is allocated with kmalloc, needs to be freed with kfree by caller.
193  *
194  * @hqd_is_occupies: Checks if a hqd slot is occupied.
195  *
196  * @hqd_destroy: Destructs and preempts the queue assigned to that hqd slot.
197  *
198  * @hqd_sdma_is_occupied: Checks if an SDMA hqd slot is occupied.
199  *
200  * @hqd_sdma_destroy: Destructs and preempts the SDMA queue assigned to that
201  * SDMA hqd slot.
202  *
203  * @set_scratch_backing_va: Sets VA for scratch backing memory of a VMID.
204  * Only used for no cp scheduling mode
205  *
206  * @set_vm_context_page_table_base: Program page table base for a VMID
207  *
208  * @invalidate_tlbs: Invalidate TLBs for a specific PASID
209  *
210  * @invalidate_tlbs_vmid: Invalidate TLBs for a specific VMID
211  *
212  * @read_vmid_from_vmfault_reg: On Hawaii the VMID is not set in the
213  * IH ring entry. This function allows the KFD ISR to get the VMID
214  * from the fault status register as early as possible.
215  *
216  * @get_cu_occupancy: Function pointer that returns to caller the number
217  * of wave fronts that are in flight for all of the queues of a process
218  * as identified by its pasid. It is important to note that the value
219  * returned by this function is a snapshot of current moment and cannot
220  * guarantee any minimum for the number of waves in-flight. This function
221  * is defined for devices that belong to GFX9 and later GFX families. Care
222  * must be taken in calling this function as it is not defined for devices
223  * that belong to GFX8 and below GFX families.
224  *
225  * This structure contains function pointers to services that the kgd driver
226  * provides to amdkfd driver.
227  *
228  */
229 struct kfd2kgd_calls {
230 	/* Register access functions */
231 	void (*program_sh_mem_settings)(struct amdgpu_device *adev, uint32_t vmid,
232 			uint32_t sh_mem_config,	uint32_t sh_mem_ape1_base,
233 			uint32_t sh_mem_ape1_limit, uint32_t sh_mem_bases);
234 
235 	int (*set_pasid_vmid_mapping)(struct amdgpu_device *adev, u32 pasid,
236 					unsigned int vmid);
237 
238 	int (*init_interrupts)(struct amdgpu_device *adev, uint32_t pipe_id);
239 
240 	int (*hqd_load)(struct amdgpu_device *adev, void *mqd, uint32_t pipe_id,
241 			uint32_t queue_id, uint32_t __user *wptr,
242 			uint32_t wptr_shift, uint32_t wptr_mask,
243 			struct mm_struct *mm);
244 
245 	int (*hiq_mqd_load)(struct amdgpu_device *adev, void *mqd,
246 			    uint32_t pipe_id, uint32_t queue_id,
247 			    uint32_t doorbell_off);
248 
249 	int (*hqd_sdma_load)(struct amdgpu_device *adev, void *mqd,
250 			     uint32_t __user *wptr, struct mm_struct *mm);
251 
252 	int (*hqd_dump)(struct amdgpu_device *adev,
253 			uint32_t pipe_id, uint32_t queue_id,
254 			uint32_t (**dump)[2], uint32_t *n_regs);
255 
256 	int (*hqd_sdma_dump)(struct amdgpu_device *adev,
257 			     uint32_t engine_id, uint32_t queue_id,
258 			     uint32_t (**dump)[2], uint32_t *n_regs);
259 
260 	bool (*hqd_is_occupied)(struct amdgpu_device *adev,
261 				uint64_t queue_address, uint32_t pipe_id,
262 				uint32_t queue_id);
263 
264 	int (*hqd_destroy)(struct amdgpu_device *adev, void *mqd,
265 				enum kfd_preempt_type reset_type,
266 				unsigned int timeout, uint32_t pipe_id,
267 				uint32_t queue_id);
268 
269 	bool (*hqd_sdma_is_occupied)(struct amdgpu_device *adev, void *mqd);
270 
271 	int (*hqd_sdma_destroy)(struct amdgpu_device *adev, void *mqd,
272 				unsigned int timeout);
273 
274 	int (*wave_control_execute)(struct amdgpu_device *adev,
275 					uint32_t gfx_index_val,
276 					uint32_t sq_cmd);
277 	bool (*get_atc_vmid_pasid_mapping_info)(struct amdgpu_device *adev,
278 					uint8_t vmid,
279 					uint16_t *p_pasid);
280 
281 	/* No longer needed from GFXv9 onward. The scratch base address is
282 	 * passed to the shader by the CP. It's the user mode driver's
283 	 * responsibility.
284 	 */
285 	void (*set_scratch_backing_va)(struct amdgpu_device *adev,
286 				uint64_t va, uint32_t vmid);
287 
288 	void (*set_vm_context_page_table_base)(struct amdgpu_device *adev,
289 			uint32_t vmid, uint64_t page_table_base);
290 	uint32_t (*read_vmid_from_vmfault_reg)(struct amdgpu_device *adev);
291 
292 	void (*get_cu_occupancy)(struct amdgpu_device *adev, int pasid,
293 			int *wave_cnt, int *max_waves_per_cu);
294 	void (*program_trap_handler_settings)(struct amdgpu_device *adev,
295 			uint32_t vmid, uint64_t tba_addr, uint64_t tma_addr);
296 };
297 
298 #endif	/* KGD_KFD_INTERFACE_H_INCLUDED */
299