1 /* 2 * Copyright 2019 Advanced Micro Devices, Inc. 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice shall be included in 12 * all copies or substantial portions of the Software. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR 18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 20 * OTHER DEALINGS IN THE SOFTWARE. 21 * 22 * Authors: AMD 23 * 24 */ 25 26 #ifndef DMUB_CMD_H 27 #define DMUB_CMD_H 28 29 #include <asm/byteorder.h> 30 #include <linux/types.h> 31 #include <linux/string.h> 32 #include <linux/delay.h> 33 34 #include "atomfirmware.h" 35 36 //<DMUB_TYPES>================================================================== 37 /* Basic type definitions. */ 38 39 #ifdef __forceinline 40 #undef __forceinline 41 #endif 42 #define __forceinline inline 43 44 /** 45 * Flag from driver to indicate that ABM should be disabled gradually 46 * by slowly reversing all backlight programming and pixel compensation. 47 */ 48 #define SET_ABM_PIPE_GRADUALLY_DISABLE 0 49 50 /** 51 * Flag from driver to indicate that ABM should be disabled immediately 52 * and undo all backlight programming and pixel compensation. 53 */ 54 #define SET_ABM_PIPE_IMMEDIATELY_DISABLE 255 55 56 /** 57 * Flag from driver to indicate that ABM should be disabled immediately 58 * and keep the current backlight programming and pixel compensation. 59 */ 60 #define SET_ABM_PIPE_IMMEDIATE_KEEP_GAIN_DISABLE 254 61 62 /** 63 * Flag from driver to set the current ABM pipe index or ABM operating level. 64 */ 65 #define SET_ABM_PIPE_NORMAL 1 66 67 /** 68 * Number of ambient light levels in ABM algorithm. 69 */ 70 #define NUM_AMBI_LEVEL 5 71 72 /** 73 * Number of operating/aggression levels in ABM algorithm. 74 */ 75 #define NUM_AGGR_LEVEL 4 76 77 /** 78 * Number of segments in the gamma curve. 79 */ 80 #define NUM_POWER_FN_SEGS 8 81 82 /** 83 * Number of segments in the backlight curve. 84 */ 85 #define NUM_BL_CURVE_SEGS 16 86 87 /** 88 * Maximum number of segments in ABM ACE curve. 89 */ 90 #define ABM_MAX_NUM_OF_ACE_SEGMENTS 64 91 92 /** 93 * Maximum number of bins in ABM histogram. 94 */ 95 #define ABM_MAX_NUM_OF_HG_BINS 64 96 97 /* Maximum number of SubVP streams */ 98 #define DMUB_MAX_SUBVP_STREAMS 2 99 100 /* Define max FPO streams as 4 for now. Current implementation today 101 * only supports 1, but could be more in the future. Reduce array 102 * size to ensure the command size remains less than 64 bytes if 103 * adding new fields. 104 */ 105 #define DMUB_MAX_FPO_STREAMS 4 106 107 /* Define to ensure that the "common" members always appear in the same 108 * order in different structs for back compat purposes 109 */ 110 #define COMMON_STREAM_STATIC_SUB_STATE \ 111 struct dmub_fams2_cmd_legacy_stream_static_state legacy; \ 112 struct dmub_fams2_cmd_subvp_stream_static_state subvp; \ 113 struct dmub_fams2_cmd_drr_stream_static_state drr; 114 115 /* Maximum number of streams on any ASIC. */ 116 #define DMUB_MAX_STREAMS 6 117 118 /* Maximum number of planes on any ASIC. */ 119 #define DMUB_MAX_PLANES 6 120 121 /* Maximum number of phantom planes on any ASIC */ 122 #define DMUB_MAX_PHANTOM_PLANES ((DMUB_MAX_PLANES) / 2) 123 124 /* Trace buffer offset for entry */ 125 #define TRACE_BUFFER_ENTRY_OFFSET 16 126 127 /** 128 * Maximum number of dirty rects supported by FW. 129 */ 130 #define DMUB_MAX_DIRTY_RECTS 3 131 132 /** 133 * 134 * PSR control version legacy 135 */ 136 #define DMUB_CMD_PSR_CONTROL_VERSION_UNKNOWN 0x0 137 /** 138 * PSR control version with multi edp support 139 */ 140 #define DMUB_CMD_PSR_CONTROL_VERSION_1 0x1 141 142 143 /** 144 * ABM control version legacy 145 */ 146 #define DMUB_CMD_ABM_CONTROL_VERSION_UNKNOWN 0x0 147 148 /** 149 * ABM control version with multi edp support 150 */ 151 #define DMUB_CMD_ABM_CONTROL_VERSION_1 0x1 152 153 /** 154 * Physical framebuffer address location, 64-bit. 155 */ 156 #ifndef PHYSICAL_ADDRESS_LOC 157 #define PHYSICAL_ADDRESS_LOC union large_integer 158 #endif 159 160 /** 161 * OS/FW agnostic memcpy 162 */ 163 #ifndef dmub_memcpy 164 #define dmub_memcpy(dest, source, bytes) memcpy((dest), (source), (bytes)) 165 #endif 166 167 /** 168 * OS/FW agnostic memset 169 */ 170 #ifndef dmub_memset 171 #define dmub_memset(dest, val, bytes) memset((dest), (val), (bytes)) 172 #endif 173 174 /** 175 * OS/FW agnostic memcmp 176 */ 177 #ifndef dmub_memcmp 178 #define dmub_memcmp(lhs, rhs, bytes) memcmp((lhs), (rhs), (bytes)) 179 #endif 180 181 /** 182 * OS/FW agnostic udelay 183 */ 184 #ifndef dmub_udelay 185 #define dmub_udelay(microseconds) udelay(microseconds) 186 #endif 187 188 #pragma pack(push, 1) 189 #define ABM_NUM_OF_ACE_SEGMENTS 5 190 191 /** 192 * Debug FW state offset 193 */ 194 #define DMUB_DEBUG_FW_STATE_OFFSET 0x300 195 196 union abm_flags { 197 struct { 198 /** 199 * @abm_enabled: Indicates if ABM is enabled. 200 */ 201 unsigned int abm_enabled : 1; 202 203 /** 204 * @disable_abm_requested: Indicates if driver has requested ABM to be disabled. 205 */ 206 unsigned int disable_abm_requested : 1; 207 208 /** 209 * @disable_abm_immediately: Indicates if driver has requested ABM to be disabled immediately. 210 */ 211 unsigned int disable_abm_immediately : 1; 212 213 /** 214 * @disable_abm_immediate_keep_gain: Indicates if driver has requested ABM 215 * to be disabled immediately and keep gain. 216 */ 217 unsigned int disable_abm_immediate_keep_gain : 1; 218 219 /** 220 * @fractional_pwm: Indicates if fractional duty cycle for backlight PWM is enabled. 221 */ 222 unsigned int fractional_pwm : 1; 223 224 /** 225 * @abm_gradual_bl_change: Indicates if algorithm has completed gradual adjustment 226 * of user backlight level. 227 */ 228 unsigned int abm_gradual_bl_change : 1; 229 230 /** 231 * @abm_new_frame: Indicates if a new frame update needed for ABM to ramp up into steady 232 */ 233 unsigned int abm_new_frame : 1; 234 235 /** 236 * @vb_scaling_enabled: Indicates variBright Scaling Enable 237 */ 238 unsigned int vb_scaling_enabled : 1; 239 } bitfields; 240 241 unsigned int u32All; 242 }; 243 244 struct abm_save_restore { 245 /** 246 * @flags: Misc. ABM flags. 247 */ 248 union abm_flags flags; 249 250 /** 251 * @pause: true: pause ABM and get state 252 * false: unpause ABM after setting state 253 */ 254 uint32_t pause; 255 256 /** 257 * @next_ace_slope: Next ACE slopes to be programmed in HW (u3.13) 258 */ 259 uint32_t next_ace_slope[ABM_NUM_OF_ACE_SEGMENTS]; 260 261 /** 262 * @next_ace_thresh: Next ACE thresholds to be programmed in HW (u10.6) 263 */ 264 uint32_t next_ace_thresh[ABM_NUM_OF_ACE_SEGMENTS]; 265 266 /** 267 * @next_ace_offset: Next ACE offsets to be programmed in HW (u10.6) 268 */ 269 uint32_t next_ace_offset[ABM_NUM_OF_ACE_SEGMENTS]; 270 271 272 /** 273 * @knee_threshold: Current x-position of ACE knee (u0.16). 274 */ 275 uint32_t knee_threshold; 276 /** 277 * @current_gain: Current backlight reduction (u16.16). 278 */ 279 uint32_t current_gain; 280 /** 281 * @curr_bl_level: Current actual backlight level converging to target backlight level. 282 */ 283 uint16_t curr_bl_level; 284 285 /** 286 * @curr_user_bl_level: Current nominal backlight level converging to level requested by user. 287 */ 288 uint16_t curr_user_bl_level; 289 290 }; 291 292 /** 293 * union dmub_addr - DMUB physical/virtual 64-bit address. 294 */ 295 union dmub_addr { 296 struct { 297 uint32_t low_part; /**< Lower 32 bits */ 298 uint32_t high_part; /**< Upper 32 bits */ 299 } u; /*<< Low/high bit access */ 300 uint64_t quad_part; /*<< 64 bit address */ 301 }; 302 303 /* Flattened structure containing SOC BB parameters stored in the VBIOS 304 * It is not practical to store the entire bounding box in VBIOS since the bounding box struct can gain new parameters. 305 * This also prevents alighment issues when new parameters are added to the SoC BB. 306 * The following parameters should be added since these values can't be obtained elsewhere: 307 * -dml2_soc_power_management_parameters 308 * -dml2_soc_vmin_clock_limits 309 */ 310 struct dmub_soc_bb_params { 311 uint32_t dram_clk_change_blackout_ns; 312 uint32_t dram_clk_change_read_only_ns; 313 uint32_t dram_clk_change_write_only_ns; 314 uint32_t fclk_change_blackout_ns; 315 uint32_t g7_ppt_blackout_ns; 316 uint32_t stutter_enter_plus_exit_latency_ns; 317 uint32_t stutter_exit_latency_ns; 318 uint32_t z8_stutter_enter_plus_exit_latency_ns; 319 uint32_t z8_stutter_exit_latency_ns; 320 uint32_t z8_min_idle_time_ns; 321 uint32_t type_b_dram_clk_change_blackout_ns; 322 uint32_t type_b_ppt_blackout_ns; 323 uint32_t vmin_limit_dispclk_khz; 324 uint32_t vmin_limit_dcfclk_khz; 325 uint32_t g7_temperature_read_blackout_ns; 326 }; 327 #pragma pack(pop) 328 329 /** 330 * Dirty rect definition. 331 */ 332 struct dmub_rect { 333 /** 334 * Dirty rect x offset. 335 */ 336 uint32_t x; 337 338 /** 339 * Dirty rect y offset. 340 */ 341 uint32_t y; 342 343 /** 344 * Dirty rect width. 345 */ 346 uint32_t width; 347 348 /** 349 * Dirty rect height. 350 */ 351 uint32_t height; 352 }; 353 354 /** 355 * Flags that can be set by driver to change some PSR behaviour. 356 */ 357 union dmub_psr_debug_flags { 358 /** 359 * Debug flags. 360 */ 361 struct { 362 /** 363 * Enable visual confirm in FW. 364 */ 365 uint32_t visual_confirm : 1; 366 367 /** 368 * Force all selective updates to bw full frame updates. 369 */ 370 uint32_t force_full_frame_update : 1; 371 372 /** 373 * Use HW Lock Mgr object to do HW locking in FW. 374 */ 375 uint32_t use_hw_lock_mgr : 1; 376 377 /** 378 * Use TPS3 signal when restore main link. 379 */ 380 uint32_t force_wakeup_by_tps3 : 1; 381 382 /** 383 * Back to back flip, therefore cannot power down PHY 384 */ 385 uint32_t back_to_back_flip : 1; 386 387 /** 388 * Enable visual confirm for IPS 389 */ 390 uint32_t enable_ips_visual_confirm : 1; 391 } bitfields; 392 393 /** 394 * Union for debug flags. 395 */ 396 uint32_t u32All; 397 }; 398 399 /** 400 * Flags that can be set by driver to change some Replay behaviour. 401 */ 402 union replay_debug_flags { 403 struct { 404 /** 405 * 0x1 (bit 0) 406 * Enable visual confirm in FW. 407 */ 408 uint32_t visual_confirm : 1; 409 410 /** 411 * 0x2 (bit 1) 412 * @skip_crc: Set if need to skip CRC. 413 */ 414 uint32_t skip_crc : 1; 415 416 /** 417 * 0x4 (bit 2) 418 * @force_link_power_on: Force disable ALPM control 419 */ 420 uint32_t force_link_power_on : 1; 421 422 /** 423 * 0x8 (bit 3) 424 * @force_phy_power_on: Force phy power on 425 */ 426 uint32_t force_phy_power_on : 1; 427 428 /** 429 * 0x10 (bit 4) 430 * @timing_resync_disabled: Disabled Replay normal sleep mode timing resync 431 */ 432 uint32_t timing_resync_disabled : 1; 433 434 /** 435 * 0x20 (bit 5) 436 * @skip_crtc_disabled: CRTC disable skipped 437 */ 438 uint32_t skip_crtc_disabled : 1; 439 440 /** 441 * 0x40 (bit 6) 442 * @force_defer_one_frame_update: Force defer one frame update in ultra sleep mode 443 */ 444 uint32_t force_defer_one_frame_update : 1; 445 446 /** 447 * 0x80 (bit 7) 448 * @disable_delay_alpm_on: Force disable delay alpm on 449 */ 450 uint32_t disable_delay_alpm_on : 1; 451 452 /** 453 * 0x100 (bit 8) 454 * @disable_desync_error_check: Force disable desync error check 455 */ 456 uint32_t disable_desync_error_check : 1; 457 458 /** 459 * 0x200 (bit 9) 460 * @force_self_update_when_abm_non_steady: Force self update if abm is not steady 461 */ 462 uint32_t force_self_update_when_abm_non_steady : 1; 463 464 /** 465 * 0x400 (bit 10) 466 * @enable_ips_visual_confirm: Enable IPS visual confirm when entering IPS 467 * If we enter IPS2, the Visual confirm bar will change to yellow 468 */ 469 uint32_t enable_ips_visual_confirm : 1; 470 471 /** 472 * 0x800 (bit 11) 473 * @enable_ips_residency_profiling: Enable IPS residency profiling 474 */ 475 uint32_t enable_ips_residency_profiling : 1; 476 477 /** 478 * 0x1000 (bit 12) 479 * @enable_coasting_vtotal_check: Enable Coasting_vtotal_check 480 */ 481 uint32_t enable_coasting_vtotal_check : 1; 482 /** 483 * 0x2000 (bit 13) 484 * @enable_visual_confirm_debug: Enable Visual Confirm Debug 485 */ 486 uint32_t enable_visual_confirm_debug : 1; 487 488 uint32_t reserved : 18; 489 } bitfields; 490 491 uint32_t u32All; 492 }; 493 494 /** 495 * Flags record error state. 496 */ 497 union replay_visual_confirm_error_state_flags { 498 struct { 499 /** 500 * 0x1 (bit 0) - Desync Error flag. 501 */ 502 uint32_t desync_error : 1; 503 504 /** 505 * 0x2 (bit 1) - State Transition Error flag. 506 */ 507 uint32_t state_transition_error : 1; 508 509 /** 510 * 0x4 (bit 2) - Crc Error flag 511 */ 512 uint32_t crc_error : 1; 513 514 /** 515 * 0x8 (bit 3) - Reserved 516 */ 517 uint32_t reserved_3 : 1; 518 519 /** 520 * 0x10 (bit 4) - Incorrect Coasting vtotal checking --> use debug flag to control DPCD write. 521 * Added new debug flag to control DPCD. 522 */ 523 uint32_t incorrect_vtotal_in_static_screen : 1; 524 525 /** 526 * 0x20 (bit 5) - No doubled Refresh Rate. 527 */ 528 uint32_t no_double_rr : 1; 529 530 /** 531 * Reserved bit 6-7 532 */ 533 uint32_t reserved_6_7 : 2; 534 535 /** 536 * Reserved bit 9-31 537 */ 538 uint32_t reserved_9_31 : 24; 539 } bitfields; 540 541 uint32_t u32All; 542 }; 543 544 union replay_hw_flags { 545 struct { 546 /** 547 * @allow_alpm_fw_standby_mode: To indicate whether the 548 * ALPM FW standby mode is allowed 549 */ 550 uint32_t allow_alpm_fw_standby_mode : 1; 551 552 /* 553 * @dsc_enable_status: DSC enable status in driver 554 */ 555 uint32_t dsc_enable_status : 1; 556 557 /** 558 * @fec_enable_status: receive fec enable/disable status from driver 559 */ 560 uint32_t fec_enable_status : 1; 561 562 /* 563 * @smu_optimizations_en: SMU power optimization. 564 * Only when active display is Replay capable and display enters Replay. 565 * Trigger interrupt to SMU to powerup/down. 566 */ 567 uint32_t smu_optimizations_en : 1; 568 569 /** 570 * @phy_power_state: Indicates current phy power state 571 */ 572 uint32_t phy_power_state : 1; 573 574 /** 575 * @link_power_state: Indicates current link power state 576 */ 577 uint32_t link_power_state : 1; 578 /** 579 * Use TPS3 signal when restore main link. 580 */ 581 uint32_t force_wakeup_by_tps3 : 1; 582 /** 583 * @is_alpm_initialized: Indicates whether ALPM is initialized 584 */ 585 uint32_t is_alpm_initialized : 1; 586 587 /** 588 * @alpm_mode: Indicates ALPM mode selected 589 */ 590 uint32_t alpm_mode : 2; 591 } bitfields; 592 593 uint32_t u32All; 594 }; 595 596 union fw_assisted_mclk_switch_version { 597 struct { 598 uint8_t minor : 5; 599 uint8_t major : 3; 600 }; 601 uint8_t ver; 602 }; 603 604 /** 605 * DMUB feature capabilities. 606 * After DMUB init, driver will query FW capabilities prior to enabling certain features. 607 */ 608 struct dmub_feature_caps { 609 /** 610 * Max PSR version supported by FW. 611 */ 612 uint8_t psr; 613 uint8_t fw_assisted_mclk_switch_ver; 614 uint8_t reserved[4]; 615 uint8_t subvp_psr_support; 616 uint8_t gecc_enable; 617 uint8_t replay_supported; 618 uint8_t replay_reserved[3]; 619 uint8_t abm_aux_backlight_support; 620 }; 621 622 struct dmub_visual_confirm_color { 623 /** 624 * Maximum 10 bits color value 625 */ 626 uint16_t color_r_cr; 627 uint16_t color_g_y; 628 uint16_t color_b_cb; 629 uint16_t panel_inst; 630 }; 631 632 //============================================================================== 633 //</DMUB_TYPES>================================================================= 634 //============================================================================== 635 //< DMUB_META>================================================================== 636 //============================================================================== 637 #pragma pack(push, 1) 638 639 /* Magic value for identifying dmub_fw_meta_info */ 640 #define DMUB_FW_META_MAGIC 0x444D5542 641 642 /* Offset from the end of the file to the dmub_fw_meta_info */ 643 #define DMUB_FW_META_OFFSET 0x24 644 645 /** 646 * union dmub_fw_meta_feature_bits - Static feature bits for pre-initialization 647 */ 648 union dmub_fw_meta_feature_bits { 649 struct { 650 uint32_t shared_state_link_detection : 1; /**< 1 supports link detection via shared state */ 651 uint32_t reserved : 31; 652 } bits; /**< status bits */ 653 uint32_t all; /**< 32-bit access to status bits */ 654 }; 655 656 /** 657 * struct dmub_fw_meta_info - metadata associated with fw binary 658 * 659 * NOTE: This should be considered a stable API. Fields should 660 * not be repurposed or reordered. New fields should be 661 * added instead to extend the structure. 662 * 663 * @magic_value: magic value identifying DMUB firmware meta info 664 * @fw_region_size: size of the firmware state region 665 * @trace_buffer_size: size of the tracebuffer region 666 * @fw_version: the firmware version information 667 * @dal_fw: 1 if the firmware is DAL 668 * @shared_state_size: size of the shared state region in bytes 669 * @shared_state_features: number of shared state features 670 */ 671 struct dmub_fw_meta_info { 672 uint32_t magic_value; /**< magic value identifying DMUB firmware meta info */ 673 uint32_t fw_region_size; /**< size of the firmware state region */ 674 uint32_t trace_buffer_size; /**< size of the tracebuffer region */ 675 uint32_t fw_version; /**< the firmware version information */ 676 uint8_t dal_fw; /**< 1 if the firmware is DAL */ 677 uint8_t reserved[3]; /**< padding bits */ 678 uint32_t shared_state_size; /**< size of the shared state region in bytes */ 679 uint16_t shared_state_features; /**< number of shared state features */ 680 uint16_t reserved2; /**< padding bytes */ 681 union dmub_fw_meta_feature_bits feature_bits; /**< static feature bits */ 682 }; 683 684 /** 685 * union dmub_fw_meta - ensures that dmub_fw_meta_info remains 64 bytes 686 */ 687 union dmub_fw_meta { 688 struct dmub_fw_meta_info info; /**< metadata info */ 689 uint8_t reserved[64]; /**< padding bits */ 690 }; 691 692 #pragma pack(pop) 693 694 //============================================================================== 695 //< DMUB Trace Buffer>================================================================ 696 //============================================================================== 697 #if !defined(TENSILICA) && !defined(DMUB_TRACE_ENTRY_DEFINED) 698 /** 699 * dmub_trace_code_t - firmware trace code, 32-bits 700 */ 701 typedef uint32_t dmub_trace_code_t; 702 703 /** 704 * struct dmcub_trace_buf_entry - Firmware trace entry 705 */ 706 struct dmcub_trace_buf_entry { 707 dmub_trace_code_t trace_code; /**< trace code for the event */ 708 uint32_t tick_count; /**< the tick count at time of trace */ 709 uint32_t param0; /**< trace defined parameter 0 */ 710 uint32_t param1; /**< trace defined parameter 1 */ 711 }; 712 #endif 713 714 //============================================================================== 715 //< DMUB_STATUS>================================================================ 716 //============================================================================== 717 718 /** 719 * DMCUB scratch registers can be used to determine firmware status. 720 * Current scratch register usage is as follows: 721 * 722 * SCRATCH0: FW Boot Status register 723 * SCRATCH5: LVTMA Status Register 724 * SCRATCH15: FW Boot Options register 725 */ 726 727 /** 728 * union dmub_fw_boot_status - Status bit definitions for SCRATCH0. 729 */ 730 union dmub_fw_boot_status { 731 struct { 732 uint32_t dal_fw : 1; /**< 1 if DAL FW */ 733 uint32_t mailbox_rdy : 1; /**< 1 if mailbox ready */ 734 uint32_t optimized_init_done : 1; /**< 1 if optimized init done */ 735 uint32_t restore_required : 1; /**< 1 if driver should call restore */ 736 uint32_t defer_load : 1; /**< 1 if VBIOS data is deferred programmed */ 737 uint32_t fams_enabled : 1; /**< 1 if VBIOS data is deferred programmed */ 738 uint32_t detection_required: 1; /**< if detection need to be triggered by driver */ 739 uint32_t hw_power_init_done: 1; /**< 1 if hw power init is completed */ 740 uint32_t ono_regions_enabled: 1; /**< 1 if ONO regions are enabled */ 741 } bits; /**< status bits */ 742 uint32_t all; /**< 32-bit access to status bits */ 743 }; 744 745 /** 746 * enum dmub_fw_boot_status_bit - Enum bit definitions for SCRATCH0. 747 */ 748 enum dmub_fw_boot_status_bit { 749 DMUB_FW_BOOT_STATUS_BIT_DAL_FIRMWARE = (1 << 0), /**< 1 if DAL FW */ 750 DMUB_FW_BOOT_STATUS_BIT_MAILBOX_READY = (1 << 1), /**< 1 if mailbox ready */ 751 DMUB_FW_BOOT_STATUS_BIT_OPTIMIZED_INIT_DONE = (1 << 2), /**< 1 if init done */ 752 DMUB_FW_BOOT_STATUS_BIT_RESTORE_REQUIRED = (1 << 3), /**< 1 if driver should call restore */ 753 DMUB_FW_BOOT_STATUS_BIT_DEFERRED_LOADED = (1 << 4), /**< 1 if VBIOS data is deferred programmed */ 754 DMUB_FW_BOOT_STATUS_BIT_FAMS_ENABLED = (1 << 5), /**< 1 if FAMS is enabled*/ 755 DMUB_FW_BOOT_STATUS_BIT_DETECTION_REQUIRED = (1 << 6), /**< 1 if detection need to be triggered by driver*/ 756 DMUB_FW_BOOT_STATUS_BIT_HW_POWER_INIT_DONE = (1 << 7), /**< 1 if hw power init is completed */ 757 DMUB_FW_BOOT_STATUS_BIT_ONO_REGIONS_ENABLED = (1 << 8), /**< 1 if ONO regions are enabled */ 758 }; 759 760 /* Register bit definition for SCRATCH5 */ 761 union dmub_lvtma_status { 762 struct { 763 uint32_t psp_ok : 1; 764 uint32_t edp_on : 1; 765 uint32_t reserved : 30; 766 } bits; 767 uint32_t all; 768 }; 769 770 enum dmub_lvtma_status_bit { 771 DMUB_LVTMA_STATUS_BIT_PSP_OK = (1 << 0), 772 DMUB_LVTMA_STATUS_BIT_EDP_ON = (1 << 1), 773 }; 774 775 enum dmub_ips_disable_type { 776 DMUB_IPS_ENABLE = 0, 777 DMUB_IPS_DISABLE_ALL = 1, 778 DMUB_IPS_DISABLE_IPS1 = 2, 779 DMUB_IPS_DISABLE_IPS2 = 3, 780 DMUB_IPS_DISABLE_IPS2_Z10 = 4, 781 DMUB_IPS_DISABLE_DYNAMIC = 5, 782 DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF = 6, 783 DMUB_IPS_DISABLE_Z8_RETENTION = 7, 784 }; 785 786 enum dmub_ips_rcg_disable_type { 787 DMUB_IPS_RCG_ENABLE = 0, 788 DMUB_IPS0_RCG_DISABLE = 1, 789 DMUB_IPS1_RCG_DISABLE = 2, 790 DMUB_IPS_RCG_DISABLE = 3 791 }; 792 793 enum dmub_ips_in_vpb_disable_type { 794 DMUB_IPS_VPB_RCG_ONLY = 0, // Legacy behaviour 795 DMUB_IPS_VPB_DISABLE_ALL = 1, 796 DMUB_IPS_VPB_ENABLE_IPS1_AND_RCG = 2, 797 DMUB_IPS_VPB_ENABLE_ALL = 3 // Enable IPS1 Z8, IPS1 and RCG 798 }; 799 800 #define DMUB_IPS1_ALLOW_MASK 0x00000001 801 #define DMUB_IPS2_ALLOW_MASK 0x00000002 802 #define DMUB_IPS1_COMMIT_MASK 0x00000004 803 #define DMUB_IPS2_COMMIT_MASK 0x00000008 804 805 enum dmub_ips_comand_type { 806 /** 807 * Start/stop IPS residency measurements for a given IPS mode 808 */ 809 DMUB_CMD__IPS_RESIDENCY_CNTL = 0, 810 /** 811 * Query IPS residency information for a given IPS mode 812 */ 813 DMUB_CMD__IPS_QUERY_RESIDENCY_INFO = 1, 814 }; 815 816 /** 817 * union dmub_fw_boot_options - Boot option definitions for SCRATCH14 818 */ 819 union dmub_fw_boot_options { 820 struct { 821 uint32_t pemu_env : 1; /**< 1 if PEMU */ 822 uint32_t fpga_env : 1; /**< 1 if FPGA */ 823 uint32_t optimized_init : 1; /**< 1 if optimized init */ 824 uint32_t skip_phy_access : 1; /**< 1 if PHY access should be skipped */ 825 uint32_t disable_clk_gate: 1; /**< 1 if clock gating should be disabled */ 826 uint32_t skip_phy_init_panel_sequence: 1; /**< 1 to skip panel init seq */ 827 uint32_t z10_disable: 1; /**< 1 to disable z10 */ 828 uint32_t enable_dpia: 1; /**< 1 if DPIA should be enabled */ 829 uint32_t invalid_vbios_data: 1; /**< 1 if VBIOS data table is invalid */ 830 uint32_t dpia_supported: 1; /**< 1 if DPIA is supported on this platform */ 831 uint32_t sel_mux_phy_c_d_phy_f_g: 1; /**< 1 if PHYF/PHYG should be enabled on DCN31 */ 832 /**< 1 if all root clock gating is enabled and low power memory is enabled*/ 833 uint32_t power_optimization: 1; 834 uint32_t diag_env: 1; /* 1 if diagnostic environment */ 835 uint32_t gpint_scratch8: 1; /* 1 if GPINT is in scratch8*/ 836 uint32_t usb4_cm_version: 1; /**< 1 CM support */ 837 uint32_t dpia_hpd_int_enable_supported: 1; /* 1 if dpia hpd int enable supported */ 838 uint32_t enable_non_transparent_setconfig: 1; /* 1 if dpia use conventional dp lt flow*/ 839 uint32_t disable_clk_ds: 1; /* 1 if disallow dispclk_ds and dppclk_ds*/ 840 uint32_t disable_timeout_recovery : 1; /* 1 if timeout recovery should be disabled */ 841 uint32_t ips_pg_disable: 1; /* 1 to disable ONO domains power gating*/ 842 uint32_t ips_disable: 3; /* options to disable ips support*/ 843 uint32_t ips_sequential_ono: 1; /**< 1 to enable sequential ONO IPS sequence */ 844 uint32_t disable_sldo_opt: 1; /**< 1 to disable SLDO optimizations */ 845 uint32_t lower_hbr3_phy_ssc: 1; /**< 1 to lower hbr3 phy ssc to 0.125 percent */ 846 uint32_t override_hbr3_pll_vco: 1; /**< 1 to override the hbr3 pll vco to 0 */ 847 uint32_t reserved : 5; /**< reserved */ 848 } bits; /**< boot bits */ 849 uint32_t all; /**< 32-bit access to bits */ 850 }; 851 852 enum dmub_fw_boot_options_bit { 853 DMUB_FW_BOOT_OPTION_BIT_PEMU_ENV = (1 << 0), /**< 1 if PEMU */ 854 DMUB_FW_BOOT_OPTION_BIT_FPGA_ENV = (1 << 1), /**< 1 if FPGA */ 855 DMUB_FW_BOOT_OPTION_BIT_OPTIMIZED_INIT_DONE = (1 << 2), /**< 1 if optimized init done */ 856 }; 857 858 //============================================================================== 859 //< DMUB_SHARED_STATE>========================================================== 860 //============================================================================== 861 862 /** 863 * Shared firmware state between driver and firmware for lockless communication 864 * in situations where the inbox/outbox may be unavailable. 865 * 866 * Each structure *must* be at most 256-bytes in size. The layout allocation is 867 * described below: 868 * 869 * [Header (256 Bytes)][Feature 1 (256 Bytes)][Feature 2 (256 Bytes)]... 870 */ 871 872 /** 873 * enum dmub_shared_state_feature_id - List of shared state features. 874 */ 875 enum dmub_shared_state_feature_id { 876 DMUB_SHARED_SHARE_FEATURE__INVALID = 0, 877 DMUB_SHARED_SHARE_FEATURE__IPS_FW = 1, 878 DMUB_SHARED_SHARE_FEATURE__IPS_DRIVER = 2, 879 DMUB_SHARED_SHARE_FEATURE__DEBUG_SETUP = 3, 880 DMUB_SHARED_STATE_FEATURE__LAST, /* Total number of features. */ 881 }; 882 883 /** 884 * struct dmub_shared_state_ips_fw - Firmware signals for IPS. 885 */ 886 union dmub_shared_state_ips_fw_signals { 887 struct { 888 uint32_t ips1_commit : 1; /**< 1 if in IPS1 or IPS0 RCG */ 889 uint32_t ips2_commit : 1; /**< 1 if in IPS2 */ 890 uint32_t in_idle : 1; /**< 1 if DMCUB is in idle */ 891 uint32_t detection_required : 1; /**< 1 if detection is required */ 892 uint32_t ips1z8_commit: 1; /**< 1 if in IPS1 Z8 Retention */ 893 uint32_t reserved_bits : 27; /**< Reversed */ 894 } bits; 895 uint32_t all; 896 }; 897 898 /** 899 * struct dmub_shared_state_ips_signals - Firmware signals for IPS. 900 */ 901 union dmub_shared_state_ips_driver_signals { 902 struct { 903 uint32_t allow_pg : 1; /**< 1 if PG is allowed */ 904 uint32_t allow_ips1 : 1; /**< 1 is IPS1 is allowed */ 905 uint32_t allow_ips2 : 1; /**< 1 is IPS1 is allowed */ 906 uint32_t allow_z10 : 1; /**< 1 if Z10 is allowed */ 907 uint32_t allow_idle: 1; /**< 1 if driver is allowing idle */ 908 uint32_t allow_ips0_rcg : 1; /**< 1 is IPS0 RCG is allowed */ 909 uint32_t allow_ips1_rcg : 1; /**< 1 is IPS1 RCG is allowed */ 910 uint32_t allow_ips1z8 : 1; /**< 1 is IPS1 Z8 Retention is allowed */ 911 uint32_t allow_dynamic_ips1 : 1; /**< 1 if IPS1 is allowed in dynamic use cases such as VPB */ 912 uint32_t allow_dynamic_ips1_z8: 1; /**< 1 if IPS1 z8 ret is allowed in dynamic use cases such as VPB */ 913 uint32_t reserved_bits : 22; /**< Reversed bits */ 914 } bits; 915 uint32_t all; 916 }; 917 918 /** 919 * IPS FW Version 920 */ 921 #define DMUB_SHARED_STATE__IPS_FW_VERSION 1 922 923 struct dmub_shared_state_debug_setup { 924 union { 925 struct { 926 uint32_t exclude_points[62]; 927 } profile_mode; 928 }; 929 }; 930 931 /** 932 * struct dmub_shared_state_ips_fw - Firmware state for IPS. 933 */ 934 struct dmub_shared_state_ips_fw { 935 union dmub_shared_state_ips_fw_signals signals; /**< 4 bytes, IPS signal bits */ 936 uint32_t rcg_entry_count; /**< Entry counter for RCG */ 937 uint32_t rcg_exit_count; /**< Exit counter for RCG */ 938 uint32_t ips1_entry_count; /**< Entry counter for IPS1 */ 939 uint32_t ips1_exit_count; /**< Exit counter for IPS1 */ 940 uint32_t ips2_entry_count; /**< Entry counter for IPS2 */ 941 uint32_t ips2_exit_count; /**< Exit counter for IPS2 */ 942 uint32_t ips1_z8ret_entry_count; /**< Entry counter for IPS1 Z8 Retention */ 943 uint32_t ips1_z8ret_exit_count; /**< Exit counter for IPS1 Z8 Retention */ 944 uint32_t reserved[53]; /**< Reversed, to be updated when adding new fields. */ 945 }; /* 248-bytes, fixed */ 946 947 /** 948 * IPS Driver Version 949 */ 950 #define DMUB_SHARED_STATE__IPS_DRIVER_VERSION 1 951 952 /** 953 * struct dmub_shared_state_ips_driver - Driver state for IPS. 954 */ 955 struct dmub_shared_state_ips_driver { 956 union dmub_shared_state_ips_driver_signals signals; /**< 4 bytes, IPS signal bits */ 957 uint32_t reserved[61]; /**< Reversed, to be updated when adding new fields. */ 958 }; /* 248-bytes, fixed */ 959 960 /** 961 * enum dmub_shared_state_feature_common - Generic payload. 962 */ 963 struct dmub_shared_state_feature_common { 964 uint32_t padding[62]; 965 }; /* 248-bytes, fixed */ 966 967 /** 968 * enum dmub_shared_state_feature_header - Feature description. 969 */ 970 struct dmub_shared_state_feature_header { 971 uint16_t id; /**< Feature ID */ 972 uint16_t version; /**< Feature version */ 973 uint32_t reserved; /**< Reserved bytes. */ 974 }; /* 8 bytes, fixed */ 975 976 /** 977 * struct dmub_shared_state_feature_block - Feature block. 978 */ 979 struct dmub_shared_state_feature_block { 980 struct dmub_shared_state_feature_header header; /**< Shared state header. */ 981 union dmub_shared_feature_state_union { 982 struct dmub_shared_state_feature_common common; /**< Generic data */ 983 struct dmub_shared_state_ips_fw ips_fw; /**< IPS firmware state */ 984 struct dmub_shared_state_ips_driver ips_driver; /**< IPS driver state */ 985 struct dmub_shared_state_debug_setup debug_setup; /**< Debug setup */ 986 } data; /**< Shared state data. */ 987 }; /* 256-bytes, fixed */ 988 989 /** 990 * Shared state size in bytes. 991 */ 992 #define DMUB_FW_HEADER_SHARED_STATE_SIZE \ 993 ((DMUB_SHARED_STATE_FEATURE__LAST + 1) * sizeof(struct dmub_shared_state_feature_block)) 994 995 //============================================================================== 996 //</DMUB_STATUS>================================================================ 997 //============================================================================== 998 //< DMUB_VBIOS>================================================================= 999 //============================================================================== 1000 1001 /* 1002 * enum dmub_cmd_vbios_type - VBIOS commands. 1003 * 1004 * Command IDs should be treated as stable ABI. 1005 * Do not reuse or modify IDs. 1006 */ 1007 enum dmub_cmd_vbios_type { 1008 /** 1009 * Configures the DIG encoder. 1010 */ 1011 DMUB_CMD__VBIOS_DIGX_ENCODER_CONTROL = 0, 1012 /** 1013 * Controls the PHY. 1014 */ 1015 DMUB_CMD__VBIOS_DIG1_TRANSMITTER_CONTROL = 1, 1016 /** 1017 * Sets the pixel clock/symbol clock. 1018 */ 1019 DMUB_CMD__VBIOS_SET_PIXEL_CLOCK = 2, 1020 /** 1021 * Enables or disables power gating. 1022 */ 1023 DMUB_CMD__VBIOS_ENABLE_DISP_POWER_GATING = 3, 1024 /** 1025 * Controls embedded panels. 1026 */ 1027 DMUB_CMD__VBIOS_LVTMA_CONTROL = 15, 1028 /** 1029 * Query DP alt status on a transmitter. 1030 */ 1031 DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT = 26, 1032 /** 1033 * Control PHY FSM 1034 */ 1035 DMUB_CMD__VBIOS_TRANSMITTER_SET_PHY_FSM = 29, 1036 /** 1037 * Controls domain power gating 1038 */ 1039 DMUB_CMD__VBIOS_DOMAIN_CONTROL = 28, 1040 }; 1041 1042 //============================================================================== 1043 //</DMUB_VBIOS>================================================================= 1044 //============================================================================== 1045 //< DMUB_GPINT>================================================================= 1046 //============================================================================== 1047 1048 /** 1049 * The shifts and masks below may alternatively be used to format and read 1050 * the command register bits. 1051 */ 1052 1053 #define DMUB_GPINT_DATA_PARAM_MASK 0xFFFF 1054 #define DMUB_GPINT_DATA_PARAM_SHIFT 0 1055 1056 #define DMUB_GPINT_DATA_COMMAND_CODE_MASK 0xFFF 1057 #define DMUB_GPINT_DATA_COMMAND_CODE_SHIFT 16 1058 1059 #define DMUB_GPINT_DATA_STATUS_MASK 0xF 1060 #define DMUB_GPINT_DATA_STATUS_SHIFT 28 1061 1062 /** 1063 * Command responses. 1064 */ 1065 1066 /** 1067 * Return response for DMUB_GPINT__STOP_FW command. 1068 */ 1069 #define DMUB_GPINT__STOP_FW_RESPONSE 0xDEADDEAD 1070 1071 /** 1072 * union dmub_gpint_data_register - Format for sending a command via the GPINT. 1073 */ 1074 union dmub_gpint_data_register { 1075 struct { 1076 uint32_t param : 16; /**< 16-bit parameter */ 1077 uint32_t command_code : 12; /**< GPINT command */ 1078 uint32_t status : 4; /**< Command status bit */ 1079 } bits; /**< GPINT bit access */ 1080 uint32_t all; /**< GPINT 32-bit access */ 1081 }; 1082 1083 /* 1084 * enum dmub_gpint_command - GPINT command to DMCUB FW 1085 * 1086 * Command IDs should be treated as stable ABI. 1087 * Do not reuse or modify IDs. 1088 */ 1089 enum dmub_gpint_command { 1090 /** 1091 * Invalid command, ignored. 1092 */ 1093 DMUB_GPINT__INVALID_COMMAND = 0, 1094 /** 1095 * DESC: Queries the firmware version. 1096 * RETURN: Firmware version. 1097 */ 1098 DMUB_GPINT__GET_FW_VERSION = 1, 1099 /** 1100 * DESC: Halts the firmware. 1101 * RETURN: DMUB_GPINT__STOP_FW_RESPONSE (0xDEADDEAD) when halted 1102 */ 1103 DMUB_GPINT__STOP_FW = 2, 1104 /** 1105 * DESC: Get PSR state from FW. 1106 * RETURN: PSR state enum. This enum may need to be converted to the legacy PSR state value. 1107 */ 1108 DMUB_GPINT__GET_PSR_STATE = 7, 1109 /** 1110 * DESC: Notifies DMCUB of the currently active streams. 1111 * ARGS: Stream mask, 1 bit per active stream index. 1112 */ 1113 DMUB_GPINT__IDLE_OPT_NOTIFY_STREAM_MASK = 8, 1114 /** 1115 * DESC: Start PSR residency counter. Stop PSR resdiency counter and get value. 1116 * ARGS: We can measure residency from various points. The argument will specify the residency mode. 1117 * By default, it is measured from after we powerdown the PHY, to just before we powerup the PHY. 1118 * RETURN: PSR residency in milli-percent. 1119 */ 1120 DMUB_GPINT__PSR_RESIDENCY = 9, 1121 1122 /** 1123 * DESC: Notifies DMCUB detection is done so detection required can be cleared. 1124 */ 1125 DMUB_GPINT__NOTIFY_DETECTION_DONE = 12, 1126 1127 /** 1128 * DESC: Get REPLAY state from FW. 1129 * RETURN: REPLAY state enum. This enum may need to be converted to the legacy REPLAY state value. 1130 */ 1131 DMUB_GPINT__GET_REPLAY_STATE = 13, 1132 1133 /** 1134 * DESC: Start REPLAY residency counter. Stop REPLAY resdiency counter and get value. 1135 * ARGS: We can measure residency from various points. The argument will specify the residency mode. 1136 * By default, it is measured from after we powerdown the PHY, to just before we powerup the PHY. 1137 * RETURN: REPLAY residency in milli-percent. 1138 */ 1139 DMUB_GPINT__REPLAY_RESIDENCY = 14, 1140 1141 /** 1142 * DESC: Copy bounding box to the host. 1143 * ARGS: Version of bounding box to copy 1144 * RETURN: Result of copying bounding box 1145 */ 1146 DMUB_GPINT__BB_COPY = 96, 1147 1148 /** 1149 * DESC: Updates the host addresses bit48~bit63 for bounding box. 1150 * ARGS: The word3 for the 64 bit address 1151 */ 1152 DMUB_GPINT__SET_BB_ADDR_WORD3 = 97, 1153 1154 /** 1155 * DESC: Updates the host addresses bit32~bit47 for bounding box. 1156 * ARGS: The word2 for the 64 bit address 1157 */ 1158 DMUB_GPINT__SET_BB_ADDR_WORD2 = 98, 1159 1160 /** 1161 * DESC: Updates the host addresses bit16~bit31 for bounding box. 1162 * ARGS: The word1 for the 64 bit address 1163 */ 1164 DMUB_GPINT__SET_BB_ADDR_WORD1 = 99, 1165 1166 /** 1167 * DESC: Updates the host addresses bit0~bit15 for bounding box. 1168 * ARGS: The word0 for the 64 bit address 1169 */ 1170 DMUB_GPINT__SET_BB_ADDR_WORD0 = 100, 1171 1172 /** 1173 * DESC: Updates the trace buffer lower 32-bit mask. 1174 * ARGS: The new mask 1175 * RETURN: Lower 32-bit mask. 1176 */ 1177 DMUB_GPINT__UPDATE_TRACE_BUFFER_MASK = 101, 1178 1179 /** 1180 * DESC: Updates the trace buffer mask bit0~bit15. 1181 * ARGS: The new mask 1182 * RETURN: Lower 32-bit mask. 1183 */ 1184 DMUB_GPINT__SET_TRACE_BUFFER_MASK_WORD0 = 102, 1185 1186 /** 1187 * DESC: Updates the trace buffer mask bit16~bit31. 1188 * ARGS: The new mask 1189 * RETURN: Lower 32-bit mask. 1190 */ 1191 DMUB_GPINT__SET_TRACE_BUFFER_MASK_WORD1 = 103, 1192 1193 /** 1194 * DESC: Updates the trace buffer mask bit32~bit47. 1195 * ARGS: The new mask 1196 * RETURN: Lower 32-bit mask. 1197 */ 1198 DMUB_GPINT__SET_TRACE_BUFFER_MASK_WORD2 = 114, 1199 1200 /** 1201 * DESC: Updates the trace buffer mask bit48~bit63. 1202 * ARGS: The new mask 1203 * RETURN: Lower 32-bit mask. 1204 */ 1205 DMUB_GPINT__SET_TRACE_BUFFER_MASK_WORD3 = 115, 1206 1207 /** 1208 * DESC: Read the trace buffer mask bi0~bit15. 1209 */ 1210 DMUB_GPINT__GET_TRACE_BUFFER_MASK_WORD0 = 116, 1211 1212 /** 1213 * DESC: Read the trace buffer mask bit16~bit31. 1214 */ 1215 DMUB_GPINT__GET_TRACE_BUFFER_MASK_WORD1 = 117, 1216 1217 /** 1218 * DESC: Read the trace buffer mask bi32~bit47. 1219 */ 1220 DMUB_GPINT__GET_TRACE_BUFFER_MASK_WORD2 = 118, 1221 1222 /** 1223 * DESC: Updates the trace buffer mask bit32~bit63. 1224 */ 1225 DMUB_GPINT__GET_TRACE_BUFFER_MASK_WORD3 = 119, 1226 1227 /** 1228 * DESC: Set IPS residency measurement 1229 * ARGS: 0 - Disable ips measurement 1230 * 1 - Enable ips measurement 1231 */ 1232 DMUB_GPINT__IPS_RESIDENCY = 121, 1233 1234 /** 1235 * DESC: Enable measurements for various task duration 1236 * ARGS: 0 - Disable measurement 1237 * 1 - Enable measurement 1238 */ 1239 DMUB_GPINT__TRACE_DMUB_WAKE_ACTIVITY = 123, 1240 1241 /** 1242 * DESC: Gets IPS residency in microseconds 1243 * ARGS: 0 - Return IPS1 residency 1244 * 1 - Return IPS2 residency 1245 * 2 - Return IPS1_RCG residency 1246 * 3 - Return IPS1_ONO2_ON residency 1247 * RETURN: Total residency in microseconds - lower 32 bits 1248 */ 1249 DMUB_GPINT__GET_IPS_RESIDENCY_DURATION_US_LO = 124, 1250 1251 /** 1252 * DESC: Gets IPS1 histogram counts 1253 * ARGS: Bucket index 1254 * RETURN: Total count for the bucket 1255 */ 1256 DMUB_GPINT__GET_IPS1_HISTOGRAM_COUNTER = 125, 1257 1258 /** 1259 * DESC: Gets IPS2 histogram counts 1260 * ARGS: Bucket index 1261 * RETURN: Total count for the bucket 1262 */ 1263 DMUB_GPINT__GET_IPS2_HISTOGRAM_COUNTER = 126, 1264 1265 /** 1266 * DESC: Gets IPS residency 1267 * ARGS: 0 - Return IPS1 residency 1268 * 1 - Return IPS2 residency 1269 * 2 - Return IPS1_RCG residency 1270 * 3 - Return IPS1_ONO2_ON residency 1271 * RETURN: Total residency in milli-percent. 1272 */ 1273 DMUB_GPINT__GET_IPS_RESIDENCY_PERCENT = 127, 1274 1275 /** 1276 * DESC: Gets IPS1_RCG histogram counts 1277 * ARGS: Bucket index 1278 * RETURN: Total count for the bucket 1279 */ 1280 DMUB_GPINT__GET_IPS1_RCG_HISTOGRAM_COUNTER = 128, 1281 1282 /** 1283 * DESC: Gets IPS1_ONO2_ON histogram counts 1284 * ARGS: Bucket index 1285 * RETURN: Total count for the bucket 1286 */ 1287 DMUB_GPINT__GET_IPS1_ONO2_ON_HISTOGRAM_COUNTER = 129, 1288 1289 /** 1290 * DESC: Gets IPS entry counter during residency measurement 1291 * ARGS: 0 - Return IPS1 entry counts 1292 * 1 - Return IPS2 entry counts 1293 * 2 - Return IPS1_RCG entry counts 1294 * 3 - Return IPS2_ONO2_ON entry counts 1295 * RETURN: Entry counter for selected IPS mode 1296 */ 1297 DMUB_GPINT__GET_IPS_RESIDENCY_ENTRY_COUNTER = 130, 1298 1299 /** 1300 * DESC: Gets IPS inactive residency in microseconds 1301 * ARGS: 0 - Return IPS1_MAX residency 1302 * 1 - Return IPS2 residency 1303 * 2 - Return IPS1_RCG residency 1304 * 3 - Return IPS1_ONO2_ON residency 1305 * RETURN: Total inactive residency in microseconds - lower 32 bits 1306 */ 1307 DMUB_GPINT__GET_IPS_INACTIVE_RESIDENCY_DURATION_US_LO = 131, 1308 1309 /** 1310 * DESC: Gets IPS inactive residency in microseconds 1311 * ARGS: 0 - Return IPS1_MAX residency 1312 * 1 - Return IPS2 residency 1313 * 2 - Return IPS1_RCG residency 1314 * 3 - Return IPS1_ONO2_ON residency 1315 * RETURN: Total inactive residency in microseconds - upper 32 bits 1316 */ 1317 DMUB_GPINT__GET_IPS_INACTIVE_RESIDENCY_DURATION_US_HI = 132, 1318 1319 /** 1320 * DESC: Gets IPS residency in microseconds 1321 * ARGS: 0 - Return IPS1 residency 1322 * 1 - Return IPS2 residency 1323 * 2 - Return IPS1_RCG residency 1324 * 3 - Return IPS1_ONO2_ON residency 1325 * RETURN: Total residency in microseconds - upper 32 bits 1326 */ 1327 DMUB_GPINT__GET_IPS_RESIDENCY_DURATION_US_HI = 133, 1328 /** 1329 * DESC: Setup debug configs. 1330 */ 1331 DMUB_GPINT__SETUP_DEBUG_MODE = 136, 1332 /** 1333 * DESC: Initiates IPS wake sequence. 1334 */ 1335 DMUB_GPINT__IPS_DEBUG_WAKE = 137, 1336 }; 1337 1338 /** 1339 * INBOX0 generic command definition 1340 */ 1341 union dmub_inbox0_cmd_common { 1342 struct { 1343 uint32_t command_code: 8; /**< INBOX0 command code */ 1344 uint32_t param: 24; /**< 24-bit parameter */ 1345 } bits; 1346 uint32_t all; 1347 }; 1348 1349 /** 1350 * INBOX0 hw_lock command definition 1351 */ 1352 union dmub_inbox0_cmd_lock_hw { 1353 struct { 1354 uint32_t command_code: 8; 1355 1356 /* NOTE: Must be have enough bits to match: enum hw_lock_client */ 1357 uint32_t hw_lock_client: 2; 1358 1359 /* NOTE: Below fields must match with: struct dmub_hw_lock_inst_flags */ 1360 uint32_t otg_inst: 3; 1361 uint32_t opp_inst: 3; 1362 uint32_t dig_inst: 3; 1363 1364 /* NOTE: Below fields must match with: union dmub_hw_lock_flags */ 1365 uint32_t lock_pipe: 1; 1366 uint32_t lock_cursor: 1; 1367 uint32_t lock_dig: 1; 1368 uint32_t triple_buffer_lock: 1; 1369 1370 uint32_t lock: 1; /**< Lock */ 1371 uint32_t should_release: 1; /**< Release */ 1372 uint32_t reserved: 7; /**< Reserved for extending more clients, HW, etc. */ 1373 } bits; 1374 uint32_t all; 1375 }; 1376 1377 union dmub_inbox0_data_register { 1378 union dmub_inbox0_cmd_common inbox0_cmd_common; 1379 union dmub_inbox0_cmd_lock_hw inbox0_cmd_lock_hw; 1380 }; 1381 1382 enum dmub_inbox0_command { 1383 /** 1384 * DESC: Invalid command, ignored. 1385 */ 1386 DMUB_INBOX0_CMD__INVALID_COMMAND = 0, 1387 /** 1388 * DESC: Notification to acquire/release HW lock 1389 * ARGS: 1390 */ 1391 DMUB_INBOX0_CMD__HW_LOCK = 1, 1392 }; 1393 //============================================================================== 1394 //</DMUB_GPINT>================================================================= 1395 //============================================================================== 1396 //< DMUB_CMD>=================================================================== 1397 //============================================================================== 1398 1399 /** 1400 * Size in bytes of each DMUB command. 1401 */ 1402 #define DMUB_RB_CMD_SIZE 64 1403 1404 /** 1405 * Maximum number of items in the DMUB ringbuffer. 1406 */ 1407 #define DMUB_RB_MAX_ENTRY 128 1408 1409 /** 1410 * Ringbuffer size in bytes. 1411 */ 1412 #define DMUB_RB_SIZE (DMUB_RB_CMD_SIZE * DMUB_RB_MAX_ENTRY) 1413 1414 /** 1415 * Maximum number of items in the DMUB REG INBOX0 internal ringbuffer. 1416 */ 1417 #define DMUB_REG_INBOX0_RB_MAX_ENTRY 16 1418 1419 /** 1420 * Ringbuffer size in bytes. 1421 */ 1422 #define DMUB_REG_INBOX0_RB_SIZE (DMUB_RB_CMD_SIZE * DMUB_REG_INBOX0_RB_MAX_ENTRY) 1423 1424 /** 1425 * REG_SET mask for reg offload. 1426 */ 1427 #define REG_SET_MASK 0xFFFF 1428 1429 /* 1430 * enum dmub_cmd_type - DMUB inbox command. 1431 * 1432 * Command IDs should be treated as stable ABI. 1433 * Do not reuse or modify IDs. 1434 */ 1435 enum dmub_cmd_type { 1436 /** 1437 * Invalid command. 1438 */ 1439 DMUB_CMD__NULL = 0, 1440 /** 1441 * Read modify write register sequence offload. 1442 */ 1443 DMUB_CMD__REG_SEQ_READ_MODIFY_WRITE = 1, 1444 /** 1445 * Field update register sequence offload. 1446 */ 1447 DMUB_CMD__REG_SEQ_FIELD_UPDATE_SEQ = 2, 1448 /** 1449 * Burst write sequence offload. 1450 */ 1451 DMUB_CMD__REG_SEQ_BURST_WRITE = 3, 1452 /** 1453 * Reg wait sequence offload. 1454 */ 1455 DMUB_CMD__REG_REG_WAIT = 4, 1456 /** 1457 * Workaround to avoid HUBP underflow during NV12 playback. 1458 */ 1459 DMUB_CMD__PLAT_54186_WA = 5, 1460 /** 1461 * Command type used to query FW feature caps. 1462 */ 1463 DMUB_CMD__QUERY_FEATURE_CAPS = 6, 1464 /** 1465 * Command type used to get visual confirm color. 1466 */ 1467 DMUB_CMD__GET_VISUAL_CONFIRM_COLOR = 8, 1468 /** 1469 * Command type used for all PSR commands. 1470 */ 1471 DMUB_CMD__PSR = 64, 1472 /** 1473 * Command type used for all MALL commands. 1474 */ 1475 DMUB_CMD__MALL = 65, 1476 /** 1477 * Command type used for all ABM commands. 1478 */ 1479 DMUB_CMD__ABM = 66, 1480 /** 1481 * Command type used to update dirty rects in FW. 1482 */ 1483 DMUB_CMD__UPDATE_DIRTY_RECT = 67, 1484 /** 1485 * Command type used to update cursor info in FW. 1486 */ 1487 DMUB_CMD__UPDATE_CURSOR_INFO = 68, 1488 /** 1489 * Command type used for HW locking in FW. 1490 */ 1491 DMUB_CMD__HW_LOCK = 69, 1492 /** 1493 * Command type used to access DP AUX. 1494 */ 1495 DMUB_CMD__DP_AUX_ACCESS = 70, 1496 /** 1497 * Command type used for OUTBOX1 notification enable 1498 */ 1499 DMUB_CMD__OUTBOX1_ENABLE = 71, 1500 1501 /** 1502 * Command type used for all idle optimization commands. 1503 */ 1504 DMUB_CMD__IDLE_OPT = 72, 1505 /** 1506 * Command type used for all clock manager commands. 1507 */ 1508 DMUB_CMD__CLK_MGR = 73, 1509 /** 1510 * Command type used for all panel control commands. 1511 */ 1512 DMUB_CMD__PANEL_CNTL = 74, 1513 1514 /** 1515 * Command type used for all CAB commands. 1516 */ 1517 DMUB_CMD__CAB_FOR_SS = 75, 1518 1519 DMUB_CMD__FW_ASSISTED_MCLK_SWITCH = 76, 1520 1521 /** 1522 * Command type used for interfacing with DPIA. 1523 */ 1524 DMUB_CMD__DPIA = 77, 1525 /** 1526 * Command type used for EDID CEA parsing 1527 */ 1528 DMUB_CMD__EDID_CEA = 79, 1529 /** 1530 * Command type used for getting usbc cable ID 1531 */ 1532 DMUB_CMD_GET_USBC_CABLE_ID = 81, 1533 /** 1534 * Command type used to query HPD state. 1535 */ 1536 DMUB_CMD__QUERY_HPD_STATE = 82, 1537 /** 1538 * Command type used for all VBIOS interface commands. 1539 */ 1540 /** 1541 * Command type used for all REPLAY commands. 1542 */ 1543 DMUB_CMD__REPLAY = 83, 1544 1545 /** 1546 * Command type used for all SECURE_DISPLAY commands. 1547 */ 1548 DMUB_CMD__SECURE_DISPLAY = 85, 1549 1550 /** 1551 * Command type used to set DPIA HPD interrupt state 1552 */ 1553 DMUB_CMD__DPIA_HPD_INT_ENABLE = 86, 1554 1555 /** 1556 * Command type used for all PSP commands. 1557 */ 1558 DMUB_CMD__PSP = 88, 1559 1560 /** 1561 * Command type used for all Fused IO commands. 1562 */ 1563 DMUB_CMD__FUSED_IO = 89, 1564 1565 /** 1566 * Command type used for all LSDMA commands. 1567 */ 1568 DMUB_CMD__LSDMA = 90, 1569 1570 /** 1571 * Command type use for all IPS commands. 1572 */ 1573 DMUB_CMD__IPS = 91, 1574 1575 DMUB_CMD__VBIOS = 128, 1576 }; 1577 1578 /** 1579 * enum dmub_out_cmd_type - DMUB outbox commands. 1580 */ 1581 enum dmub_out_cmd_type { 1582 /** 1583 * Invalid outbox command, ignored. 1584 */ 1585 DMUB_OUT_CMD__NULL = 0, 1586 /** 1587 * Command type used for DP AUX Reply data notification 1588 */ 1589 DMUB_OUT_CMD__DP_AUX_REPLY = 1, 1590 /** 1591 * Command type used for DP HPD event notification 1592 */ 1593 DMUB_OUT_CMD__DP_HPD_NOTIFY = 2, 1594 /** 1595 * Command type used for SET_CONFIG Reply notification 1596 */ 1597 DMUB_OUT_CMD__SET_CONFIG_REPLY = 3, 1598 /** 1599 * Command type used for USB4 DPIA notification 1600 */ 1601 DMUB_OUT_CMD__DPIA_NOTIFICATION = 5, 1602 /** 1603 * Command type used for HPD redetect notification 1604 */ 1605 DMUB_OUT_CMD__HPD_SENSE_NOTIFY = 6, 1606 /** 1607 * Command type used for Fused IO notification 1608 */ 1609 DMUB_OUT_CMD__FUSED_IO = 7, 1610 }; 1611 1612 /* DMUB_CMD__DPIA command sub-types. */ 1613 enum dmub_cmd_dpia_type { 1614 DMUB_CMD__DPIA_DIG1_DPIA_CONTROL = 0, 1615 DMUB_CMD__DPIA_SET_CONFIG_ACCESS = 1, // will be replaced by DPIA_SET_CONFIG_REQUEST 1616 DMUB_CMD__DPIA_MST_ALLOC_SLOTS = 2, 1617 DMUB_CMD__DPIA_SET_TPS_NOTIFICATION = 3, 1618 DMUB_CMD__DPIA_SET_CONFIG_REQUEST = 4, 1619 }; 1620 1621 /* DMUB_OUT_CMD__DPIA_NOTIFICATION command types. */ 1622 enum dmub_cmd_dpia_notification_type { 1623 DPIA_NOTIFY__BW_ALLOCATION = 0, 1624 }; 1625 1626 #pragma pack(push, 1) 1627 1628 /** 1629 * struct dmub_cmd_header - Common command header fields. 1630 */ 1631 struct dmub_cmd_header { 1632 unsigned int type : 8; /**< command type */ 1633 unsigned int sub_type : 8; /**< command sub type */ 1634 unsigned int ret_status : 1; /**< 1 if returned data, 0 otherwise */ 1635 unsigned int multi_cmd_pending : 1; /**< 1 if multiple commands chained together */ 1636 unsigned int is_reg_based : 1; /**< 1 if register based mailbox cmd, 0 if FB based cmd */ 1637 unsigned int reserved0 : 5; /**< reserved bits */ 1638 unsigned int payload_bytes : 6; /* payload excluding header - up to 60 bytes */ 1639 unsigned int reserved1 : 2; /**< reserved bits */ 1640 }; 1641 1642 /* 1643 * struct dmub_cmd_read_modify_write_sequence - Read modify write 1644 * 1645 * 60 payload bytes can hold up to 5 sets of read modify writes, 1646 * each take 3 dwords. 1647 * 1648 * number of sequences = header.payload_bytes / sizeof(struct dmub_cmd_read_modify_write_sequence) 1649 * 1650 * modify_mask = 0xffff'ffff means all fields are going to be updated. in this case 1651 * command parser will skip the read and we can use modify_mask = 0xffff'ffff as reg write 1652 */ 1653 struct dmub_cmd_read_modify_write_sequence { 1654 uint32_t addr; /**< register address */ 1655 uint32_t modify_mask; /**< modify mask */ 1656 uint32_t modify_value; /**< modify value */ 1657 }; 1658 1659 /** 1660 * Maximum number of ops in read modify write sequence. 1661 */ 1662 #define DMUB_READ_MODIFY_WRITE_SEQ__MAX 5 1663 1664 /** 1665 * struct dmub_cmd_read_modify_write_sequence - Read modify write command. 1666 */ 1667 struct dmub_rb_cmd_read_modify_write { 1668 struct dmub_cmd_header header; /**< command header */ 1669 /** 1670 * Read modify write sequence. 1671 */ 1672 struct dmub_cmd_read_modify_write_sequence seq[DMUB_READ_MODIFY_WRITE_SEQ__MAX]; 1673 }; 1674 1675 /* 1676 * Update a register with specified masks and values sequeunce 1677 * 1678 * 60 payload bytes can hold address + up to 7 sets of mask/value combo, each take 2 dword 1679 * 1680 * number of field update sequence = (header.payload_bytes - sizeof(addr)) / sizeof(struct read_modify_write_sequence) 1681 * 1682 * 1683 * USE CASE: 1684 * 1. auto-increment register where additional read would update pointer and produce wrong result 1685 * 2. toggle a bit without read in the middle 1686 */ 1687 1688 struct dmub_cmd_reg_field_update_sequence { 1689 uint32_t modify_mask; /**< 0xffff'ffff to skip initial read */ 1690 uint32_t modify_value; /**< value to update with */ 1691 }; 1692 1693 /** 1694 * Maximum number of ops in field update sequence. 1695 */ 1696 #define DMUB_REG_FIELD_UPDATE_SEQ__MAX 7 1697 1698 /** 1699 * struct dmub_rb_cmd_reg_field_update_sequence - Field update command. 1700 */ 1701 struct dmub_rb_cmd_reg_field_update_sequence { 1702 struct dmub_cmd_header header; /**< command header */ 1703 uint32_t addr; /**< register address */ 1704 /** 1705 * Field update sequence. 1706 */ 1707 struct dmub_cmd_reg_field_update_sequence seq[DMUB_REG_FIELD_UPDATE_SEQ__MAX]; 1708 }; 1709 1710 1711 /** 1712 * Maximum number of burst write values. 1713 */ 1714 #define DMUB_BURST_WRITE_VALUES__MAX 14 1715 1716 /* 1717 * struct dmub_rb_cmd_burst_write - Burst write 1718 * 1719 * support use case such as writing out LUTs. 1720 * 1721 * 60 payload bytes can hold up to 14 values to write to given address 1722 * 1723 * number of payload = header.payload_bytes / sizeof(struct read_modify_write_sequence) 1724 */ 1725 struct dmub_rb_cmd_burst_write { 1726 struct dmub_cmd_header header; /**< command header */ 1727 uint32_t addr; /**< register start address */ 1728 /** 1729 * Burst write register values. 1730 */ 1731 uint32_t write_values[DMUB_BURST_WRITE_VALUES__MAX]; 1732 }; 1733 1734 /** 1735 * struct dmub_rb_cmd_common - Common command header 1736 */ 1737 struct dmub_rb_cmd_common { 1738 struct dmub_cmd_header header; /**< command header */ 1739 /** 1740 * Padding to RB_CMD_SIZE 1741 */ 1742 uint8_t cmd_buffer[DMUB_RB_CMD_SIZE - sizeof(struct dmub_cmd_header)]; 1743 }; 1744 1745 /** 1746 * struct dmub_cmd_reg_wait_data - Register wait data 1747 */ 1748 struct dmub_cmd_reg_wait_data { 1749 uint32_t addr; /**< Register address */ 1750 uint32_t mask; /**< Mask for register bits */ 1751 uint32_t condition_field_value; /**< Value to wait for */ 1752 uint32_t time_out_us; /**< Time out for reg wait in microseconds */ 1753 }; 1754 1755 /** 1756 * struct dmub_rb_cmd_reg_wait - Register wait command 1757 */ 1758 struct dmub_rb_cmd_reg_wait { 1759 struct dmub_cmd_header header; /**< Command header */ 1760 struct dmub_cmd_reg_wait_data reg_wait; /**< Register wait data */ 1761 }; 1762 1763 /** 1764 * struct dmub_cmd_PLAT_54186_wa - Underflow workaround 1765 * 1766 * Reprograms surface parameters to avoid underflow. 1767 */ 1768 struct dmub_cmd_PLAT_54186_wa { 1769 uint32_t DCSURF_SURFACE_CONTROL; /**< reg value */ 1770 uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH; /**< reg value */ 1771 uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS; /**< reg value */ 1772 uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH_C; /**< reg value */ 1773 uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS_C; /**< reg value */ 1774 struct { 1775 uint32_t hubp_inst : 4; /**< HUBP instance */ 1776 uint32_t tmz_surface : 1; /**< TMZ enable or disable */ 1777 uint32_t immediate :1; /**< Immediate flip */ 1778 uint32_t vmid : 4; /**< VMID */ 1779 uint32_t grph_stereo : 1; /**< 1 if stereo */ 1780 uint32_t reserved : 21; /**< Reserved */ 1781 } flip_params; /**< Pageflip parameters */ 1782 uint32_t reserved[9]; /**< Reserved bits */ 1783 }; 1784 1785 /** 1786 * struct dmub_rb_cmd_PLAT_54186_wa - Underflow workaround command 1787 */ 1788 struct dmub_rb_cmd_PLAT_54186_wa { 1789 struct dmub_cmd_header header; /**< Command header */ 1790 struct dmub_cmd_PLAT_54186_wa flip; /**< Flip data */ 1791 }; 1792 1793 /** 1794 * enum dmub_cmd_mall_type - MALL commands 1795 */ 1796 enum dmub_cmd_mall_type { 1797 /** 1798 * Allows display refresh from MALL. 1799 */ 1800 DMUB_CMD__MALL_ACTION_ALLOW = 0, 1801 /** 1802 * Disallows display refresh from MALL. 1803 */ 1804 DMUB_CMD__MALL_ACTION_DISALLOW = 1, 1805 /** 1806 * Cursor copy for MALL. 1807 */ 1808 DMUB_CMD__MALL_ACTION_COPY_CURSOR = 2, 1809 /** 1810 * Controls DF requests. 1811 */ 1812 DMUB_CMD__MALL_ACTION_NO_DF_REQ = 3, 1813 }; 1814 1815 /** 1816 * struct dmub_rb_cmd_mall - MALL command data. 1817 */ 1818 struct dmub_rb_cmd_mall { 1819 struct dmub_cmd_header header; /**< Common command header */ 1820 union dmub_addr cursor_copy_src; /**< Cursor copy address */ 1821 union dmub_addr cursor_copy_dst; /**< Cursor copy destination */ 1822 uint32_t tmr_delay; /**< Timer delay */ 1823 uint32_t tmr_scale; /**< Timer scale */ 1824 uint16_t cursor_width; /**< Cursor width in pixels */ 1825 uint16_t cursor_pitch; /**< Cursor pitch in pixels */ 1826 uint16_t cursor_height; /**< Cursor height in pixels */ 1827 uint8_t cursor_bpp; /**< Cursor bits per pixel */ 1828 uint8_t debug_bits; /**< Debug bits */ 1829 1830 uint8_t reserved1; /**< Reserved bits */ 1831 uint8_t reserved2; /**< Reserved bits */ 1832 }; 1833 1834 /** 1835 * enum dmub_cmd_cab_type - CAB command data. 1836 */ 1837 enum dmub_cmd_cab_type { 1838 /** 1839 * No idle optimizations (i.e. no CAB) 1840 */ 1841 DMUB_CMD__CAB_NO_IDLE_OPTIMIZATION = 0, 1842 /** 1843 * No DCN requests for memory 1844 */ 1845 DMUB_CMD__CAB_NO_DCN_REQ = 1, 1846 /** 1847 * Fit surfaces in CAB (i.e. CAB enable) 1848 */ 1849 DMUB_CMD__CAB_DCN_SS_FIT_IN_CAB = 2, 1850 /** 1851 * Do not fit surfaces in CAB (i.e. no CAB) 1852 */ 1853 DMUB_CMD__CAB_DCN_SS_NOT_FIT_IN_CAB = 3, 1854 }; 1855 1856 /** 1857 * struct dmub_rb_cmd_cab - CAB command data. 1858 */ 1859 struct dmub_rb_cmd_cab_for_ss { 1860 struct dmub_cmd_header header; 1861 uint8_t cab_alloc_ways; /* total number of ways */ 1862 uint8_t debug_bits; /* debug bits */ 1863 }; 1864 1865 /** 1866 * Enum for indicating which MCLK switch mode per pipe 1867 */ 1868 enum mclk_switch_mode { 1869 NONE = 0, 1870 FPO = 1, 1871 SUBVP = 2, 1872 VBLANK = 3, 1873 }; 1874 1875 /* Per pipe struct which stores the MCLK switch mode 1876 * data to be sent to DMUB. 1877 * Named "v2" for now -- once FPO and SUBVP are fully merged 1878 * the type name can be updated 1879 */ 1880 struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 { 1881 union { 1882 struct { 1883 uint32_t pix_clk_100hz; 1884 uint16_t main_vblank_start; 1885 uint16_t main_vblank_end; 1886 uint16_t mall_region_lines; 1887 uint16_t prefetch_lines; 1888 uint16_t prefetch_to_mall_start_lines; 1889 uint16_t processing_delay_lines; 1890 uint16_t htotal; // required to calculate line time for multi-display cases 1891 uint16_t vtotal; 1892 uint8_t main_pipe_index; 1893 uint8_t phantom_pipe_index; 1894 /* Since the microschedule is calculated in terms of OTG lines, 1895 * include any scaling factors to make sure when we get accurate 1896 * conversion when programming MALL_START_LINE (which is in terms 1897 * of HUBP lines). If 4K is being downscaled to 1080p, scale factor 1898 * is 1/2 (numerator = 1, denominator = 2). 1899 */ 1900 uint8_t scale_factor_numerator; 1901 uint8_t scale_factor_denominator; 1902 uint8_t is_drr; 1903 uint8_t main_split_pipe_index; 1904 uint8_t phantom_split_pipe_index; 1905 } subvp_data; 1906 1907 struct { 1908 uint32_t pix_clk_100hz; 1909 uint16_t vblank_start; 1910 uint16_t vblank_end; 1911 uint16_t vstartup_start; 1912 uint16_t vtotal; 1913 uint16_t htotal; 1914 uint8_t vblank_pipe_index; 1915 uint8_t padding[1]; 1916 struct { 1917 uint8_t drr_in_use; 1918 uint8_t drr_window_size_ms; // Indicates largest VMIN/VMAX adjustment per frame 1919 uint16_t min_vtotal_supported; // Min VTOTAL that supports switching in VBLANK 1920 uint16_t max_vtotal_supported; // Max VTOTAL that can support SubVP static scheduling 1921 uint8_t use_ramping; // Use ramping or not 1922 uint8_t drr_vblank_start_margin; 1923 } drr_info; // DRR considered as part of SubVP + VBLANK case 1924 } vblank_data; 1925 } pipe_config; 1926 1927 /* - subvp_data in the union (pipe_config) takes up 27 bytes. 1928 * - Make the "mode" field a uint8_t instead of enum so we only use 1 byte (only 1929 * for the DMCUB command, cast to enum once we populate the DMCUB subvp state). 1930 */ 1931 uint8_t mode; // enum mclk_switch_mode 1932 }; 1933 1934 /** 1935 * Config data for Sub-VP and FPO 1936 * Named "v2" for now -- once FPO and SUBVP are fully merged 1937 * the type name can be updated 1938 */ 1939 struct dmub_cmd_fw_assisted_mclk_switch_config_v2 { 1940 uint16_t watermark_a_cache; 1941 uint8_t vertical_int_margin_us; 1942 uint8_t pstate_allow_width_us; 1943 struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 pipe_data[DMUB_MAX_SUBVP_STREAMS]; 1944 }; 1945 1946 /** 1947 * DMUB rb command definition for Sub-VP and FPO 1948 * Named "v2" for now -- once FPO and SUBVP are fully merged 1949 * the type name can be updated 1950 */ 1951 struct dmub_rb_cmd_fw_assisted_mclk_switch_v2 { 1952 struct dmub_cmd_header header; 1953 struct dmub_cmd_fw_assisted_mclk_switch_config_v2 config_data; 1954 }; 1955 1956 struct dmub_flip_addr_info { 1957 uint32_t surf_addr_lo; 1958 uint32_t surf_addr_c_lo; 1959 uint32_t meta_addr_lo; 1960 uint32_t meta_addr_c_lo; 1961 uint16_t surf_addr_hi; 1962 uint16_t surf_addr_c_hi; 1963 uint16_t meta_addr_hi; 1964 uint16_t meta_addr_c_hi; 1965 }; 1966 1967 struct dmub_fams2_flip_info { 1968 union { 1969 struct { 1970 uint8_t is_immediate: 1; 1971 } bits; 1972 uint8_t all; 1973 } config; 1974 uint8_t otg_inst; 1975 uint8_t pipe_mask; 1976 uint8_t pad; 1977 struct dmub_flip_addr_info addr_info; 1978 }; 1979 1980 struct dmub_rb_cmd_fams2_flip { 1981 struct dmub_cmd_header header; 1982 struct dmub_fams2_flip_info flip_info; 1983 }; 1984 1985 struct dmub_cmd_lsdma_data { 1986 union { 1987 struct lsdma_init_data { 1988 union dmub_addr gpu_addr_base; 1989 uint32_t ring_size; 1990 } init_data; 1991 struct lsdma_tiled_copy_data { 1992 uint32_t src_addr_lo; 1993 uint32_t src_addr_hi; 1994 1995 uint32_t dst_addr_lo; 1996 uint32_t dst_addr_hi; 1997 1998 uint32_t src_x : 16; 1999 uint32_t src_y : 16; 2000 2001 uint32_t dst_x : 16; 2002 uint32_t dst_y : 16; 2003 2004 uint32_t src_width : 16; 2005 uint32_t src_height : 16; 2006 2007 uint32_t dst_width : 16; 2008 uint32_t dst_height : 16; 2009 2010 uint32_t rect_x : 16; 2011 uint32_t rect_y : 16; 2012 2013 uint32_t src_swizzle_mode : 5; 2014 uint32_t src_mip_max : 5; 2015 uint32_t src_mip_id : 5; 2016 uint32_t dst_mip_max : 5; 2017 uint32_t dst_swizzle_mode : 5; 2018 uint32_t dst_mip_id : 5; 2019 uint32_t tmz : 1; 2020 uint32_t dcc : 1; 2021 2022 uint32_t data_format : 6; 2023 uint32_t padding1 : 4; 2024 uint32_t dst_element_size : 3; 2025 uint32_t num_type : 3; 2026 uint32_t src_element_size : 3; 2027 uint32_t write_compress : 2; 2028 uint32_t cache_policy_dst : 2; 2029 uint32_t cache_policy_src : 2; 2030 uint32_t read_compress : 2; 2031 uint32_t src_dim : 2; 2032 uint32_t dst_dim : 2; 2033 uint32_t max_uncom : 1; 2034 2035 uint32_t max_com : 2; 2036 uint32_t padding : 30; 2037 } tiled_copy_data; 2038 struct lsdma_linear_copy_data { 2039 uint32_t src_lo; 2040 uint32_t src_hi; 2041 2042 uint32_t dst_lo; 2043 uint32_t dst_hi; 2044 2045 uint32_t count : 30; 2046 uint32_t cache_policy_dst : 2; 2047 2048 uint32_t tmz : 1; 2049 uint32_t cache_policy_src : 2; 2050 uint32_t padding : 29; 2051 } linear_copy_data; 2052 struct lsdma_linear_sub_window_copy_data { 2053 uint32_t src_lo; 2054 uint32_t src_hi; 2055 2056 uint32_t dst_lo; 2057 uint32_t dst_hi; 2058 2059 uint32_t src_x : 16; 2060 uint32_t src_y : 16; 2061 2062 uint32_t dst_x : 16; 2063 uint32_t dst_y : 16; 2064 2065 uint32_t rect_x : 16; 2066 uint32_t rect_y : 16; 2067 2068 uint32_t src_pitch : 16; 2069 uint32_t dst_pitch : 16; 2070 2071 uint32_t src_slice_pitch; 2072 uint32_t dst_slice_pitch; 2073 2074 uint32_t tmz : 1; 2075 uint32_t element_size : 3; 2076 uint32_t src_cache_policy : 3; 2077 uint32_t dst_cache_policy : 3; 2078 uint32_t reserved0 : 22; 2079 } linear_sub_window_copy_data; 2080 struct lsdma_reg_write_data { 2081 uint32_t reg_addr; 2082 uint32_t reg_data; 2083 } reg_write_data; 2084 struct lsdma_pio_copy_data { 2085 uint32_t src_lo; 2086 uint32_t src_hi; 2087 2088 uint32_t dst_lo; 2089 uint32_t dst_hi; 2090 2091 union { 2092 struct { 2093 uint32_t byte_count : 26; 2094 uint32_t src_loc : 1; 2095 uint32_t dst_loc : 1; 2096 uint32_t src_addr_inc : 1; 2097 uint32_t dst_addr_inc : 1; 2098 uint32_t overlap_disable : 1; 2099 uint32_t constant_fill : 1; 2100 } fields; 2101 uint32_t raw; 2102 } packet; 2103 } pio_copy_data; 2104 struct lsdma_pio_constfill_data { 2105 uint32_t dst_lo; 2106 uint32_t dst_hi; 2107 2108 union { 2109 struct { 2110 uint32_t byte_count : 26; 2111 uint32_t src_loc : 1; 2112 uint32_t dst_loc : 1; 2113 uint32_t src_addr_inc : 1; 2114 uint32_t dst_addr_inc : 1; 2115 uint32_t overlap_disable : 1; 2116 uint32_t constant_fill : 1; 2117 } fields; 2118 uint32_t raw; 2119 } packet; 2120 2121 uint32_t data; 2122 } pio_constfill_data; 2123 2124 uint32_t all[14]; 2125 } u; 2126 }; 2127 2128 struct dmub_rb_cmd_lsdma { 2129 struct dmub_cmd_header header; 2130 struct dmub_cmd_lsdma_data lsdma_data; 2131 }; 2132 2133 struct dmub_optc_state_v2 { 2134 uint32_t v_total_min; 2135 uint32_t v_total_max; 2136 uint32_t v_total_mid; 2137 uint32_t v_total_mid_frame_num; 2138 uint8_t program_manual_trigger; 2139 uint8_t tg_inst; 2140 uint8_t pad[2]; 2141 }; 2142 2143 struct dmub_optc_position { 2144 uint32_t vpos; 2145 uint32_t hpos; 2146 uint32_t frame; 2147 }; 2148 2149 struct dmub_rb_cmd_fams2_drr_update { 2150 struct dmub_cmd_header header; 2151 struct dmub_optc_state_v2 dmub_optc_state_req; 2152 }; 2153 2154 /* HW and FW global configuration data for FAMS2 */ 2155 /* FAMS2 types and structs */ 2156 enum fams2_stream_type { 2157 FAMS2_STREAM_TYPE_NONE = 0, 2158 FAMS2_STREAM_TYPE_VBLANK = 1, 2159 FAMS2_STREAM_TYPE_VACTIVE = 2, 2160 FAMS2_STREAM_TYPE_DRR = 3, 2161 FAMS2_STREAM_TYPE_SUBVP = 4, 2162 }; 2163 2164 struct dmub_rect16 { 2165 /** 2166 * Dirty rect x offset. 2167 */ 2168 uint16_t x; 2169 2170 /** 2171 * Dirty rect y offset. 2172 */ 2173 uint16_t y; 2174 2175 /** 2176 * Dirty rect width. 2177 */ 2178 uint16_t width; 2179 2180 /** 2181 * Dirty rect height. 2182 */ 2183 uint16_t height; 2184 }; 2185 2186 /* static stream state */ 2187 struct dmub_fams2_legacy_stream_static_state { 2188 uint8_t vactive_det_fill_delay_otg_vlines; 2189 uint8_t programming_delay_otg_vlines; 2190 }; //v0 2191 2192 struct dmub_fams2_subvp_stream_static_state { 2193 uint16_t vratio_numerator; 2194 uint16_t vratio_denominator; 2195 uint16_t phantom_vtotal; 2196 uint16_t phantom_vactive; 2197 union { 2198 struct { 2199 uint8_t is_multi_planar : 1; 2200 uint8_t is_yuv420 : 1; 2201 } bits; 2202 uint8_t all; 2203 } config; 2204 uint8_t programming_delay_otg_vlines; 2205 uint8_t prefetch_to_mall_otg_vlines; 2206 uint8_t phantom_otg_inst; 2207 uint8_t phantom_pipe_mask; 2208 uint8_t phantom_plane_pipe_masks[DMUB_MAX_PHANTOM_PLANES]; // phantom pipe mask per plane (for flip passthrough) 2209 }; //v0 2210 2211 struct dmub_fams2_drr_stream_static_state { 2212 uint16_t nom_stretched_vtotal; 2213 uint8_t programming_delay_otg_vlines; 2214 uint8_t only_stretch_if_required; 2215 uint8_t pad[2]; 2216 }; //v0 2217 2218 struct dmub_fams2_cmd_legacy_stream_static_state { 2219 uint16_t vactive_det_fill_delay_otg_vlines; 2220 uint16_t programming_delay_otg_vlines; 2221 }; //v1 2222 2223 struct dmub_fams2_cmd_subvp_stream_static_state { 2224 uint16_t vratio_numerator; 2225 uint16_t vratio_denominator; 2226 uint16_t phantom_vtotal; 2227 uint16_t phantom_vactive; 2228 uint16_t programming_delay_otg_vlines; 2229 uint16_t prefetch_to_mall_otg_vlines; 2230 union { 2231 struct { 2232 uint8_t is_multi_planar : 1; 2233 uint8_t is_yuv420 : 1; 2234 } bits; 2235 uint8_t all; 2236 } config; 2237 uint8_t phantom_otg_inst; 2238 uint8_t phantom_pipe_mask; 2239 uint8_t pad0; 2240 uint8_t phantom_plane_pipe_masks[DMUB_MAX_PHANTOM_PLANES]; // phantom pipe mask per plane (for flip passthrough) 2241 uint8_t pad1[4 - (DMUB_MAX_PHANTOM_PLANES % 4)]; 2242 }; //v1 2243 2244 struct dmub_fams2_cmd_drr_stream_static_state { 2245 uint16_t nom_stretched_vtotal; 2246 uint16_t programming_delay_otg_vlines; 2247 uint8_t only_stretch_if_required; 2248 uint8_t pad[3]; 2249 }; //v1 2250 2251 union dmub_fams2_stream_static_sub_state { 2252 struct dmub_fams2_legacy_stream_static_state legacy; 2253 struct dmub_fams2_subvp_stream_static_state subvp; 2254 struct dmub_fams2_drr_stream_static_state drr; 2255 }; //v0 2256 2257 union dmub_fams2_cmd_stream_static_sub_state { 2258 COMMON_STREAM_STATIC_SUB_STATE 2259 }; //v1 2260 2261 union dmub_fams2_stream_static_sub_state_v2 { 2262 COMMON_STREAM_STATIC_SUB_STATE 2263 }; //v2 2264 2265 struct dmub_fams2_stream_static_state { 2266 enum fams2_stream_type type; 2267 uint32_t otg_vline_time_ns; 2268 uint32_t otg_vline_time_ticks; 2269 uint16_t htotal; 2270 uint16_t vtotal; // nominal vtotal 2271 uint16_t vblank_start; 2272 uint16_t vblank_end; 2273 uint16_t max_vtotal; 2274 uint16_t allow_start_otg_vline; 2275 uint16_t allow_end_otg_vline; 2276 uint16_t drr_keepout_otg_vline; // after this vline, vtotal cannot be changed 2277 uint8_t scheduling_delay_otg_vlines; // min time to budget for ready to microschedule start 2278 uint8_t contention_delay_otg_vlines; // time to budget for contention on execution 2279 uint8_t vline_int_ack_delay_otg_vlines; // min time to budget for vertical interrupt firing 2280 uint8_t allow_to_target_delay_otg_vlines; // time from allow vline to target vline 2281 union { 2282 struct { 2283 uint8_t is_drr: 1; // stream is DRR enabled 2284 uint8_t clamp_vtotal_min: 1; // clamp vtotal to min instead of nominal 2285 uint8_t min_ttu_vblank_usable: 1; // if min ttu vblank is above wm, no force pstate is needed in blank 2286 } bits; 2287 uint8_t all; 2288 } config; 2289 uint8_t otg_inst; 2290 uint8_t pipe_mask; // pipe mask for the whole config 2291 uint8_t num_planes; 2292 uint8_t plane_pipe_masks[DMUB_MAX_PLANES]; // pipe mask per plane (for flip passthrough) 2293 uint8_t pad[4 - (DMUB_MAX_PLANES % 4)]; 2294 union dmub_fams2_stream_static_sub_state sub_state; 2295 }; //v0 2296 2297 struct dmub_fams2_cmd_stream_static_base_state { 2298 enum fams2_stream_type type; 2299 uint32_t otg_vline_time_ns; 2300 uint32_t otg_vline_time_ticks; 2301 uint16_t htotal; 2302 uint16_t vtotal; // nominal vtotal 2303 uint16_t vblank_start; 2304 uint16_t vblank_end; 2305 uint16_t max_vtotal; 2306 uint16_t allow_start_otg_vline; 2307 uint16_t allow_end_otg_vline; 2308 uint16_t drr_keepout_otg_vline; // after this vline, vtotal cannot be changed 2309 uint16_t scheduling_delay_otg_vlines; // min time to budget for ready to microschedule start 2310 uint16_t contention_delay_otg_vlines; // time to budget for contention on execution 2311 uint16_t vline_int_ack_delay_otg_vlines; // min time to budget for vertical interrupt firing 2312 uint16_t allow_to_target_delay_otg_vlines; // time from allow vline to target vline 2313 union { 2314 struct { 2315 uint8_t is_drr : 1; // stream is DRR enabled 2316 uint8_t clamp_vtotal_min : 1; // clamp vtotal to min instead of nominal 2317 uint8_t min_ttu_vblank_usable : 1; // if min ttu vblank is above wm, no force pstate is needed in blank 2318 } bits; 2319 uint8_t all; 2320 } config; 2321 uint8_t otg_inst; 2322 uint8_t pipe_mask; // pipe mask for the whole config 2323 uint8_t num_planes; 2324 uint8_t plane_pipe_masks[DMUB_MAX_PLANES]; // pipe mask per plane (for flip passthrough) 2325 uint8_t pad[4 - (DMUB_MAX_PLANES % 4)]; 2326 }; //v1 2327 2328 struct dmub_fams2_stream_static_state_v1 { 2329 struct dmub_fams2_cmd_stream_static_base_state base; 2330 union dmub_fams2_stream_static_sub_state_v2 sub_state; 2331 }; //v1 2332 2333 /** 2334 * enum dmub_fams2_allow_delay_check_mode - macroscheduler mode for breaking on excessive 2335 * p-state request to allow latency 2336 */ 2337 enum dmub_fams2_allow_delay_check_mode { 2338 /* No check for request to allow delay */ 2339 FAMS2_ALLOW_DELAY_CHECK_NONE = 0, 2340 /* Check for request to allow delay */ 2341 FAMS2_ALLOW_DELAY_CHECK_FROM_START = 1, 2342 /* Check for prepare to allow delay */ 2343 FAMS2_ALLOW_DELAY_CHECK_FROM_PREPARE = 2, 2344 }; 2345 2346 union dmub_fams2_global_feature_config { 2347 struct { 2348 uint32_t enable: 1; 2349 uint32_t enable_ppt_check: 1; 2350 uint32_t enable_stall_recovery: 1; 2351 uint32_t enable_debug: 1; 2352 uint32_t enable_offload_flip: 1; 2353 uint32_t enable_visual_confirm: 1; 2354 uint32_t allow_delay_check_mode: 2; 2355 uint32_t reserved: 24; 2356 } bits; 2357 uint32_t all; 2358 }; 2359 2360 struct dmub_cmd_fams2_global_config { 2361 uint32_t max_allow_delay_us; // max delay to assert allow from uclk change begin 2362 uint32_t lock_wait_time_us; // time to forecast acquisition of lock 2363 uint32_t num_streams; 2364 union dmub_fams2_global_feature_config features; 2365 uint32_t recovery_timeout_us; 2366 uint32_t hwfq_flip_programming_delay_us; 2367 }; 2368 2369 union dmub_cmd_fams2_config { 2370 struct dmub_cmd_fams2_global_config global; 2371 struct dmub_fams2_stream_static_state stream; //v0 2372 union { 2373 struct dmub_fams2_cmd_stream_static_base_state base; 2374 union dmub_fams2_cmd_stream_static_sub_state sub_state; 2375 } stream_v1; //v1 2376 }; 2377 2378 struct dmub_fams2_config_v2 { 2379 struct dmub_cmd_fams2_global_config global; 2380 struct dmub_fams2_stream_static_state_v1 stream_v1[DMUB_MAX_STREAMS]; //v1 2381 }; 2382 2383 /** 2384 * DMUB rb command definition for FAMS2 (merged SubVP, FPO, Legacy) 2385 */ 2386 struct dmub_rb_cmd_fams2 { 2387 struct dmub_cmd_header header; 2388 union dmub_cmd_fams2_config config; 2389 }; 2390 2391 /** 2392 * Indirect buffer descriptor 2393 */ 2394 struct dmub_ib_data { 2395 union dmub_addr src; // location of indirect buffer in memory 2396 uint16_t size; // indirect buffer size in bytes 2397 }; 2398 2399 /** 2400 * DMUB rb command definition for commands passed over indirect buffer 2401 */ 2402 struct dmub_rb_cmd_ib { 2403 struct dmub_cmd_header header; 2404 struct dmub_ib_data ib_data; 2405 }; 2406 2407 /** 2408 * enum dmub_cmd_idle_opt_type - Idle optimization command type. 2409 */ 2410 enum dmub_cmd_idle_opt_type { 2411 /** 2412 * DCN hardware restore. 2413 */ 2414 DMUB_CMD__IDLE_OPT_DCN_RESTORE = 0, 2415 2416 /** 2417 * DCN hardware save. 2418 */ 2419 DMUB_CMD__IDLE_OPT_DCN_SAVE_INIT = 1, 2420 2421 /** 2422 * DCN hardware notify idle. 2423 */ 2424 DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE = 2, 2425 2426 /** 2427 * DCN hardware notify power state. 2428 */ 2429 DMUB_CMD__IDLE_OPT_SET_DC_POWER_STATE = 3, 2430 2431 /** 2432 * DCN notify to release HW. 2433 */ 2434 DMUB_CMD__IDLE_OPT_RELEASE_HW = 4, 2435 }; 2436 2437 /** 2438 * struct dmub_rb_cmd_idle_opt_dcn_restore - DCN restore command data. 2439 */ 2440 struct dmub_rb_cmd_idle_opt_dcn_restore { 2441 struct dmub_cmd_header header; /**< header */ 2442 }; 2443 2444 /** 2445 * struct dmub_dcn_notify_idle_cntl_data - Data passed to FW in a DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE command. 2446 */ 2447 struct dmub_dcn_notify_idle_cntl_data { 2448 uint8_t driver_idle; 2449 uint8_t skip_otg_disable; 2450 uint8_t reserved[58]; 2451 }; 2452 2453 /** 2454 * struct dmub_rb_cmd_idle_opt_dcn_notify_idle - Data passed to FW in a DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE command. 2455 */ 2456 struct dmub_rb_cmd_idle_opt_dcn_notify_idle { 2457 struct dmub_cmd_header header; /**< header */ 2458 struct dmub_dcn_notify_idle_cntl_data cntl_data; 2459 }; 2460 2461 /** 2462 * enum dmub_idle_opt_dc_power_state - DC power states. 2463 */ 2464 enum dmub_idle_opt_dc_power_state { 2465 DMUB_IDLE_OPT_DC_POWER_STATE_UNKNOWN = 0, 2466 DMUB_IDLE_OPT_DC_POWER_STATE_D0 = 1, 2467 DMUB_IDLE_OPT_DC_POWER_STATE_D1 = 2, 2468 DMUB_IDLE_OPT_DC_POWER_STATE_D2 = 4, 2469 DMUB_IDLE_OPT_DC_POWER_STATE_D3 = 8, 2470 }; 2471 2472 /** 2473 * struct dmub_idle_opt_set_dc_power_state_data - Data passed to FW in a DMUB_CMD__IDLE_OPT_SET_DC_POWER_STATE command. 2474 */ 2475 struct dmub_idle_opt_set_dc_power_state_data { 2476 uint8_t power_state; /**< power state */ 2477 uint8_t pad[3]; /**< padding */ 2478 }; 2479 2480 /** 2481 * struct dmub_rb_cmd_idle_opt_set_dc_power_state - Data passed to FW in a DMUB_CMD__IDLE_OPT_SET_DC_POWER_STATE command. 2482 */ 2483 struct dmub_rb_cmd_idle_opt_set_dc_power_state { 2484 struct dmub_cmd_header header; /**< header */ 2485 struct dmub_idle_opt_set_dc_power_state_data data; 2486 }; 2487 2488 /** 2489 * struct dmub_clocks - Clock update notification. 2490 */ 2491 struct dmub_clocks { 2492 uint32_t dispclk_khz; /**< dispclk kHz */ 2493 uint32_t dppclk_khz; /**< dppclk kHz */ 2494 uint32_t dcfclk_khz; /**< dcfclk kHz */ 2495 uint32_t dcfclk_deep_sleep_khz; /**< dcfclk deep sleep kHz */ 2496 }; 2497 2498 /** 2499 * enum dmub_cmd_clk_mgr_type - Clock manager commands. 2500 */ 2501 enum dmub_cmd_clk_mgr_type { 2502 /** 2503 * Notify DMCUB of clock update. 2504 */ 2505 DMUB_CMD__CLK_MGR_NOTIFY_CLOCKS = 0, 2506 }; 2507 2508 /** 2509 * struct dmub_rb_cmd_clk_mgr_notify_clocks - Clock update notification. 2510 */ 2511 struct dmub_rb_cmd_clk_mgr_notify_clocks { 2512 struct dmub_cmd_header header; /**< header */ 2513 struct dmub_clocks clocks; /**< clock data */ 2514 }; 2515 2516 /** 2517 * struct dmub_cmd_digx_encoder_control_data - Encoder control data. 2518 */ 2519 struct dmub_cmd_digx_encoder_control_data { 2520 union dig_encoder_control_parameters_v1_5 dig; /**< payload */ 2521 }; 2522 2523 /** 2524 * struct dmub_rb_cmd_digx_encoder_control - Encoder control command. 2525 */ 2526 struct dmub_rb_cmd_digx_encoder_control { 2527 struct dmub_cmd_header header; /**< header */ 2528 struct dmub_cmd_digx_encoder_control_data encoder_control; /**< payload */ 2529 }; 2530 2531 /** 2532 * struct dmub_cmd_set_pixel_clock_data - Set pixel clock data. 2533 */ 2534 struct dmub_cmd_set_pixel_clock_data { 2535 struct set_pixel_clock_parameter_v1_7 clk; /**< payload */ 2536 }; 2537 2538 /** 2539 * struct dmub_cmd_set_pixel_clock_data - Set pixel clock command. 2540 */ 2541 struct dmub_rb_cmd_set_pixel_clock { 2542 struct dmub_cmd_header header; /**< header */ 2543 struct dmub_cmd_set_pixel_clock_data pixel_clock; /**< payload */ 2544 }; 2545 2546 /** 2547 * struct dmub_cmd_enable_disp_power_gating_data - Display power gating. 2548 */ 2549 struct dmub_cmd_enable_disp_power_gating_data { 2550 struct enable_disp_power_gating_parameters_v2_1 pwr; /**< payload */ 2551 }; 2552 2553 /** 2554 * struct dmub_rb_cmd_enable_disp_power_gating - Display power command. 2555 */ 2556 struct dmub_rb_cmd_enable_disp_power_gating { 2557 struct dmub_cmd_header header; /**< header */ 2558 struct dmub_cmd_enable_disp_power_gating_data power_gating; /**< payload */ 2559 }; 2560 2561 /** 2562 * struct dmub_dig_transmitter_control_data_v1_7 - Transmitter control. 2563 */ 2564 struct dmub_dig_transmitter_control_data_v1_7 { 2565 uint8_t phyid; /**< 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4=UNIPHYE, 5=UNIPHYF */ 2566 uint8_t action; /**< Defined as ATOM_TRANSMITER_ACTION_xxx */ 2567 union { 2568 uint8_t digmode; /**< enum atom_encode_mode_def */ 2569 uint8_t dplaneset; /**< DP voltage swing and pre-emphasis value, "DP_LANE_SET__xDB_y_zV" */ 2570 } mode_laneset; 2571 uint8_t lanenum; /**< Number of lanes */ 2572 union { 2573 uint32_t symclk_10khz; /**< Symbol Clock in 10Khz */ 2574 } symclk_units; 2575 uint8_t hpdsel; /**< =1: HPD1, =2: HPD2, ..., =6: HPD6, =0: HPD is not assigned */ 2576 uint8_t digfe_sel; /**< DIG front-end selection, bit0 means DIG0 FE is enabled */ 2577 uint8_t connobj_id; /**< Connector Object Id defined in ObjectId.h */ 2578 uint8_t HPO_instance; /**< HPO instance (0: inst0, 1: inst1) */ 2579 uint8_t reserved1; /**< For future use */ 2580 uint8_t skip_phy_ssc_reduction; 2581 uint8_t reserved2[2]; /**< For future use */ 2582 uint32_t reserved3[11]; /**< For future use */ 2583 }; 2584 2585 /** 2586 * union dmub_cmd_dig1_transmitter_control_data - Transmitter control data. 2587 */ 2588 union dmub_cmd_dig1_transmitter_control_data { 2589 struct dig_transmitter_control_parameters_v1_6 dig; /**< payload */ 2590 struct dmub_dig_transmitter_control_data_v1_7 dig_v1_7; /**< payload 1.7 */ 2591 }; 2592 2593 /** 2594 * struct dmub_rb_cmd_dig1_transmitter_control - Transmitter control command. 2595 */ 2596 struct dmub_rb_cmd_dig1_transmitter_control { 2597 struct dmub_cmd_header header; /**< header */ 2598 union dmub_cmd_dig1_transmitter_control_data transmitter_control; /**< payload */ 2599 }; 2600 2601 /** 2602 * struct dmub_rb_cmd_domain_control_data - Data for DOMAIN power control 2603 */ 2604 struct dmub_rb_cmd_domain_control_data { 2605 uint8_t inst : 6; /**< DOMAIN instance to control */ 2606 uint8_t power_gate : 1; /**< 1=power gate, 0=power up */ 2607 uint8_t reserved[3]; /**< Reserved for future use */ 2608 }; 2609 2610 /** 2611 * struct dmub_rb_cmd_domain_control - Controls DOMAIN power gating 2612 */ 2613 struct dmub_rb_cmd_domain_control { 2614 struct dmub_cmd_header header; /**< header */ 2615 struct dmub_rb_cmd_domain_control_data data; /**< payload */ 2616 }; 2617 2618 /** 2619 * DPIA tunnel command parameters. 2620 */ 2621 struct dmub_cmd_dig_dpia_control_data { 2622 uint8_t enc_id; /** 0 = ENGINE_ID_DIGA, ... */ 2623 uint8_t action; /** ATOM_TRANSMITER_ACTION_DISABLE/ENABLE/SETUP_VSEMPH */ 2624 union { 2625 uint8_t digmode; /** enum atom_encode_mode_def */ 2626 uint8_t dplaneset; /** DP voltage swing and pre-emphasis value */ 2627 } mode_laneset; 2628 uint8_t lanenum; /** Lane number 1, 2, 4, 8 */ 2629 uint32_t symclk_10khz; /** Symbol Clock in 10Khz */ 2630 uint8_t hpdsel; /** =0: HPD is not assigned */ 2631 uint8_t digfe_sel; /** DIG stream( front-end ) selection, bit0 - DIG0 FE */ 2632 uint8_t dpia_id; /** Index of DPIA */ 2633 uint8_t fec_rdy : 1; 2634 uint8_t reserved : 7; 2635 uint32_t reserved1; 2636 }; 2637 2638 /** 2639 * DMUB command for DPIA tunnel control. 2640 */ 2641 struct dmub_rb_cmd_dig1_dpia_control { 2642 struct dmub_cmd_header header; 2643 struct dmub_cmd_dig_dpia_control_data dpia_control; 2644 }; 2645 2646 /** 2647 * SET_CONFIG Command Payload (deprecated) 2648 */ 2649 struct set_config_cmd_payload { 2650 uint8_t msg_type; /* set config message type */ 2651 uint8_t msg_data; /* set config message data */ 2652 }; 2653 2654 /** 2655 * Data passed from driver to FW in a DMUB_CMD__DPIA_SET_CONFIG_ACCESS command. (deprecated) 2656 */ 2657 struct dmub_cmd_set_config_control_data { 2658 struct set_config_cmd_payload cmd_pkt; 2659 uint8_t instance; /* DPIA instance */ 2660 uint8_t immed_status; /* Immediate status returned in case of error */ 2661 }; 2662 2663 /** 2664 * SET_CONFIG Request Command Payload 2665 */ 2666 struct set_config_request_cmd_payload { 2667 uint8_t instance; /* DPIA instance */ 2668 uint8_t immed_status; /* Immediate status returned in case of error */ 2669 uint8_t msg_type; /* set config message type */ 2670 uint8_t reserved; 2671 uint32_t msg_data; /* set config message data */ 2672 }; 2673 2674 /** 2675 * DMUB command structure for SET_CONFIG command. 2676 */ 2677 struct dmub_rb_cmd_set_config_access { 2678 struct dmub_cmd_header header; /* header */ 2679 struct dmub_cmd_set_config_control_data set_config_control; /* set config data */ 2680 }; 2681 2682 /** 2683 * DMUB command structure for SET_CONFIG request command. 2684 */ 2685 struct dmub_rb_cmd_set_config_request { 2686 struct dmub_cmd_header header; /* header */ 2687 struct set_config_request_cmd_payload payload; /* set config request payload */ 2688 }; 2689 2690 /** 2691 * Data passed from driver to FW in a DMUB_CMD__DPIA_MST_ALLOC_SLOTS command. 2692 */ 2693 struct dmub_cmd_mst_alloc_slots_control_data { 2694 uint8_t mst_alloc_slots; /* mst slots to be allotted */ 2695 uint8_t instance; /* DPIA instance */ 2696 uint8_t immed_status; /* Immediate status returned as there is no outbox msg posted */ 2697 uint8_t mst_slots_in_use; /* returns slots in use for error cases */ 2698 }; 2699 2700 /** 2701 * DMUB command structure for SET_ command. 2702 */ 2703 struct dmub_rb_cmd_set_mst_alloc_slots { 2704 struct dmub_cmd_header header; /* header */ 2705 struct dmub_cmd_mst_alloc_slots_control_data mst_slots_control; /* mst slots control */ 2706 }; 2707 2708 /** 2709 * Data passed from driver to FW in a DMUB_CMD__SET_TPS_NOTIFICATION command. 2710 */ 2711 struct dmub_cmd_tps_notification_data { 2712 uint8_t instance; /* DPIA instance */ 2713 uint8_t tps; /* requested training pattern */ 2714 uint8_t reserved1; 2715 uint8_t reserved2; 2716 }; 2717 2718 /** 2719 * DMUB command structure for SET_TPS_NOTIFICATION command. 2720 */ 2721 struct dmub_rb_cmd_set_tps_notification { 2722 struct dmub_cmd_header header; /* header */ 2723 struct dmub_cmd_tps_notification_data tps_notification; /* set tps_notification data */ 2724 }; 2725 2726 /** 2727 * DMUB command structure for DPIA HPD int enable control. 2728 */ 2729 struct dmub_rb_cmd_dpia_hpd_int_enable { 2730 struct dmub_cmd_header header; /* header */ 2731 uint32_t enable; /* dpia hpd interrupt enable */ 2732 }; 2733 2734 /** 2735 * struct dmub_rb_cmd_dpphy_init - DPPHY init. 2736 */ 2737 struct dmub_rb_cmd_dpphy_init { 2738 struct dmub_cmd_header header; /**< header */ 2739 uint8_t reserved[60]; /**< reserved bits */ 2740 }; 2741 2742 /** 2743 * enum dp_aux_request_action - DP AUX request command listing. 2744 * 2745 * 4 AUX request command bits are shifted to high nibble. 2746 */ 2747 enum dp_aux_request_action { 2748 /** I2C-over-AUX write request */ 2749 DP_AUX_REQ_ACTION_I2C_WRITE = 0x00, 2750 /** I2C-over-AUX read request */ 2751 DP_AUX_REQ_ACTION_I2C_READ = 0x10, 2752 /** I2C-over-AUX write status request */ 2753 DP_AUX_REQ_ACTION_I2C_STATUS_REQ = 0x20, 2754 /** I2C-over-AUX write request with MOT=1 */ 2755 DP_AUX_REQ_ACTION_I2C_WRITE_MOT = 0x40, 2756 /** I2C-over-AUX read request with MOT=1 */ 2757 DP_AUX_REQ_ACTION_I2C_READ_MOT = 0x50, 2758 /** I2C-over-AUX write status request with MOT=1 */ 2759 DP_AUX_REQ_ACTION_I2C_STATUS_REQ_MOT = 0x60, 2760 /** Native AUX write request */ 2761 DP_AUX_REQ_ACTION_DPCD_WRITE = 0x80, 2762 /** Native AUX read request */ 2763 DP_AUX_REQ_ACTION_DPCD_READ = 0x90 2764 }; 2765 2766 /** 2767 * enum aux_return_code_type - DP AUX process return code listing. 2768 */ 2769 enum aux_return_code_type { 2770 /** AUX process succeeded */ 2771 AUX_RET_SUCCESS = 0, 2772 /** AUX process failed with unknown reason */ 2773 AUX_RET_ERROR_UNKNOWN, 2774 /** AUX process completed with invalid reply */ 2775 AUX_RET_ERROR_INVALID_REPLY, 2776 /** AUX process timed out */ 2777 AUX_RET_ERROR_TIMEOUT, 2778 /** HPD was low during AUX process */ 2779 AUX_RET_ERROR_HPD_DISCON, 2780 /** Failed to acquire AUX engine */ 2781 AUX_RET_ERROR_ENGINE_ACQUIRE, 2782 /** AUX request not supported */ 2783 AUX_RET_ERROR_INVALID_OPERATION, 2784 /** AUX process not available */ 2785 AUX_RET_ERROR_PROTOCOL_ERROR, 2786 }; 2787 2788 /** 2789 * enum aux_channel_type - DP AUX channel type listing. 2790 */ 2791 enum aux_channel_type { 2792 /** AUX thru Legacy DP AUX */ 2793 AUX_CHANNEL_LEGACY_DDC, 2794 /** AUX thru DPIA DP tunneling */ 2795 AUX_CHANNEL_DPIA 2796 }; 2797 2798 /** 2799 * struct aux_transaction_parameters - DP AUX request transaction data 2800 */ 2801 struct aux_transaction_parameters { 2802 uint8_t is_i2c_over_aux; /**< 0=native AUX, 1=I2C-over-AUX */ 2803 uint8_t action; /**< enum dp_aux_request_action */ 2804 uint8_t length; /**< DP AUX request data length */ 2805 uint8_t reserved; /**< For future use */ 2806 uint32_t address; /**< DP AUX address */ 2807 uint8_t data[16]; /**< DP AUX write data */ 2808 }; 2809 2810 /** 2811 * Data passed from driver to FW in a DMUB_CMD__DP_AUX_ACCESS command. 2812 */ 2813 struct dmub_cmd_dp_aux_control_data { 2814 uint8_t instance; /**< AUX instance or DPIA instance */ 2815 uint8_t manual_acq_rel_enable; /**< manual control for acquiring or releasing AUX channel */ 2816 uint8_t sw_crc_enabled; /**< Use software CRC for tunneling packet instead of hardware CRC */ 2817 uint8_t reserved0; /**< For future use */ 2818 uint16_t timeout; /**< timeout time in us */ 2819 uint16_t reserved1; /**< For future use */ 2820 enum aux_channel_type type; /**< enum aux_channel_type */ 2821 struct aux_transaction_parameters dpaux; /**< struct aux_transaction_parameters */ 2822 }; 2823 2824 /** 2825 * Definition of a DMUB_CMD__DP_AUX_ACCESS command. 2826 */ 2827 struct dmub_rb_cmd_dp_aux_access { 2828 /** 2829 * Command header. 2830 */ 2831 struct dmub_cmd_header header; 2832 /** 2833 * Data passed from driver to FW in a DMUB_CMD__DP_AUX_ACCESS command. 2834 */ 2835 struct dmub_cmd_dp_aux_control_data aux_control; 2836 }; 2837 2838 /** 2839 * Definition of a DMUB_CMD__OUTBOX1_ENABLE command. 2840 */ 2841 struct dmub_rb_cmd_outbox1_enable { 2842 /** 2843 * Command header. 2844 */ 2845 struct dmub_cmd_header header; 2846 /** 2847 * enable: 0x0 -> disable outbox1 notification (default value) 2848 * 0x1 -> enable outbox1 notification 2849 */ 2850 uint32_t enable; 2851 }; 2852 2853 /* DP AUX Reply command - OutBox Cmd */ 2854 /** 2855 * Data passed to driver from FW in a DMUB_OUT_CMD__DP_AUX_REPLY command. 2856 */ 2857 struct aux_reply_data { 2858 /** 2859 * Aux cmd 2860 */ 2861 uint8_t command; 2862 /** 2863 * Aux reply data length (max: 16 bytes) 2864 */ 2865 uint8_t length; 2866 /** 2867 * Alignment only 2868 */ 2869 uint8_t pad[2]; 2870 /** 2871 * Aux reply data 2872 */ 2873 uint8_t data[16]; 2874 }; 2875 2876 /** 2877 * Control Data passed to driver from FW in a DMUB_OUT_CMD__DP_AUX_REPLY command. 2878 */ 2879 struct aux_reply_control_data { 2880 /** 2881 * Reserved for future use 2882 */ 2883 uint32_t handle; 2884 /** 2885 * Aux Instance 2886 */ 2887 uint8_t instance; 2888 /** 2889 * Aux transaction result: definition in enum aux_return_code_type 2890 */ 2891 uint8_t result; 2892 /** 2893 * Alignment only 2894 */ 2895 uint16_t pad; 2896 }; 2897 2898 /** 2899 * Definition of a DMUB_OUT_CMD__DP_AUX_REPLY command. 2900 */ 2901 struct dmub_rb_cmd_dp_aux_reply { 2902 /** 2903 * Command header. 2904 */ 2905 struct dmub_cmd_header header; 2906 /** 2907 * Control Data passed to driver from FW in a DMUB_OUT_CMD__DP_AUX_REPLY command. 2908 */ 2909 struct aux_reply_control_data control; 2910 /** 2911 * Data passed to driver from FW in a DMUB_OUT_CMD__DP_AUX_REPLY command. 2912 */ 2913 struct aux_reply_data reply_data; 2914 }; 2915 2916 /* DP HPD Notify command - OutBox Cmd */ 2917 /** 2918 * DP HPD Type 2919 */ 2920 enum dp_hpd_type { 2921 /** 2922 * Normal DP HPD 2923 */ 2924 DP_HPD = 0, 2925 /** 2926 * DP HPD short pulse 2927 */ 2928 DP_IRQ = 1, 2929 /** 2930 * Failure to acquire DP HPD state 2931 */ 2932 DP_NONE_HPD = 2 2933 }; 2934 2935 /** 2936 * DP HPD Status 2937 */ 2938 enum dp_hpd_status { 2939 /** 2940 * DP_HPD status low 2941 */ 2942 DP_HPD_UNPLUG = 0, 2943 /** 2944 * DP_HPD status high 2945 */ 2946 DP_HPD_PLUG 2947 }; 2948 2949 /** 2950 * Data passed to driver from FW in a DMUB_OUT_CMD__DP_HPD_NOTIFY command. 2951 */ 2952 struct dp_hpd_data { 2953 /** 2954 * DP HPD instance 2955 */ 2956 uint8_t instance; 2957 /** 2958 * HPD type 2959 */ 2960 uint8_t hpd_type; 2961 /** 2962 * HPD status: only for type: DP_HPD to indicate status 2963 */ 2964 uint8_t hpd_status; 2965 /** 2966 * Alignment only 2967 */ 2968 uint8_t pad; 2969 }; 2970 2971 /** 2972 * Definition of a DMUB_OUT_CMD__DP_HPD_NOTIFY command. 2973 */ 2974 struct dmub_rb_cmd_dp_hpd_notify { 2975 /** 2976 * Command header. 2977 */ 2978 struct dmub_cmd_header header; 2979 /** 2980 * Data passed to driver from FW in a DMUB_OUT_CMD__DP_HPD_NOTIFY command. 2981 */ 2982 struct dp_hpd_data hpd_data; 2983 }; 2984 2985 /** 2986 * Definition of a SET_CONFIG reply from DPOA. 2987 */ 2988 enum set_config_status { 2989 SET_CONFIG_PENDING = 0, 2990 SET_CONFIG_ACK_RECEIVED, 2991 SET_CONFIG_RX_TIMEOUT, 2992 SET_CONFIG_UNKNOWN_ERROR, 2993 }; 2994 2995 /** 2996 * Definition of a set_config reply 2997 */ 2998 struct set_config_reply_control_data { 2999 uint8_t instance; /* DPIA Instance */ 3000 uint8_t status; /* Set Config reply */ 3001 uint16_t pad; /* Alignment */ 3002 }; 3003 3004 /** 3005 * Definition of a DMUB_OUT_CMD__SET_CONFIG_REPLY command. 3006 */ 3007 struct dmub_rb_cmd_dp_set_config_reply { 3008 struct dmub_cmd_header header; 3009 struct set_config_reply_control_data set_config_reply_control; 3010 }; 3011 3012 /** 3013 * Definition of a DPIA notification header 3014 */ 3015 struct dpia_notification_header { 3016 uint8_t instance; /**< DPIA Instance */ 3017 uint8_t reserved[3]; 3018 enum dmub_cmd_dpia_notification_type type; /**< DPIA notification type */ 3019 }; 3020 3021 /** 3022 * Definition of the common data struct of DPIA notification 3023 */ 3024 struct dpia_notification_common { 3025 uint8_t cmd_buffer[DMUB_RB_CMD_SIZE - sizeof(struct dmub_cmd_header) 3026 - sizeof(struct dpia_notification_header)]; 3027 }; 3028 3029 /** 3030 * Definition of a DPIA notification data 3031 */ 3032 struct dpia_bw_allocation_notify_data { 3033 union { 3034 struct { 3035 uint16_t cm_bw_alloc_support: 1; /**< USB4 CM BW Allocation mode support */ 3036 uint16_t bw_request_failed: 1; /**< BW_Request_Failed */ 3037 uint16_t bw_request_succeeded: 1; /**< BW_Request_Succeeded */ 3038 uint16_t est_bw_changed: 1; /**< Estimated_BW changed */ 3039 uint16_t bw_alloc_cap_changed: 1; /**< BW_Allocation_Capabiity_Changed */ 3040 uint16_t reserved: 11; /**< Reserved */ 3041 } bits; 3042 3043 uint16_t flags; 3044 }; 3045 3046 uint8_t cm_id; /**< CM ID */ 3047 uint8_t group_id; /**< Group ID */ 3048 uint8_t granularity; /**< BW Allocation Granularity */ 3049 uint8_t estimated_bw; /**< Estimated_BW */ 3050 uint8_t allocated_bw; /**< Allocated_BW */ 3051 uint8_t reserved; 3052 }; 3053 3054 /** 3055 * union dpia_notify_data_type - DPIA Notification in Outbox command 3056 */ 3057 union dpia_notification_data { 3058 /** 3059 * DPIA Notification for common data struct 3060 */ 3061 struct dpia_notification_common common_data; 3062 3063 /** 3064 * DPIA Notification for DP BW Allocation support 3065 */ 3066 struct dpia_bw_allocation_notify_data dpia_bw_alloc; 3067 }; 3068 3069 /** 3070 * Definition of a DPIA notification payload 3071 */ 3072 struct dpia_notification_payload { 3073 struct dpia_notification_header header; 3074 union dpia_notification_data data; /**< DPIA notification payload data */ 3075 }; 3076 3077 /** 3078 * Definition of a DMUB_OUT_CMD__DPIA_NOTIFICATION command. 3079 */ 3080 struct dmub_rb_cmd_dpia_notification { 3081 struct dmub_cmd_header header; /**< DPIA notification header */ 3082 struct dpia_notification_payload payload; /**< DPIA notification payload */ 3083 }; 3084 3085 /** 3086 * Data passed from driver to FW in a DMUB_CMD__QUERY_HPD_STATE command. 3087 */ 3088 struct dmub_cmd_hpd_state_query_data { 3089 uint8_t instance; /**< HPD instance or DPIA instance */ 3090 uint8_t result; /**< For returning HPD state */ 3091 uint16_t pad; /** < Alignment */ 3092 enum aux_channel_type ch_type; /**< enum aux_channel_type */ 3093 enum aux_return_code_type status; /**< for returning the status of command */ 3094 }; 3095 3096 /** 3097 * Definition of a DMUB_CMD__QUERY_HPD_STATE command. 3098 */ 3099 struct dmub_rb_cmd_query_hpd_state { 3100 /** 3101 * Command header. 3102 */ 3103 struct dmub_cmd_header header; 3104 /** 3105 * Data passed from driver to FW in a DMUB_CMD__QUERY_HPD_STATE command. 3106 */ 3107 struct dmub_cmd_hpd_state_query_data data; 3108 }; 3109 3110 /** 3111 * struct dmub_rb_cmd_hpd_sense_notify - HPD sense notification data. 3112 */ 3113 struct dmub_rb_cmd_hpd_sense_notify_data { 3114 uint32_t old_hpd_sense_mask; /**< Old HPD sense mask */ 3115 uint32_t new_hpd_sense_mask; /**< New HPD sense mask */ 3116 }; 3117 3118 /** 3119 * struct dmub_rb_cmd_hpd_sense_notify - DMUB_OUT_CMD__HPD_SENSE_NOTIFY command. 3120 */ 3121 struct dmub_rb_cmd_hpd_sense_notify { 3122 struct dmub_cmd_header header; /**< header */ 3123 struct dmub_rb_cmd_hpd_sense_notify_data data; /**< payload */ 3124 }; 3125 3126 /* 3127 * Command IDs should be treated as stable ABI. 3128 * Do not reuse or modify IDs. 3129 */ 3130 3131 /** 3132 * PSR command sub-types. 3133 */ 3134 enum dmub_cmd_psr_type { 3135 /** 3136 * Set PSR version support. 3137 */ 3138 DMUB_CMD__PSR_SET_VERSION = 0, 3139 /** 3140 * Copy driver-calculated parameters to PSR state. 3141 */ 3142 DMUB_CMD__PSR_COPY_SETTINGS = 1, 3143 /** 3144 * Enable PSR. 3145 */ 3146 DMUB_CMD__PSR_ENABLE = 2, 3147 3148 /** 3149 * Disable PSR. 3150 */ 3151 DMUB_CMD__PSR_DISABLE = 3, 3152 3153 /** 3154 * Set PSR level. 3155 * PSR level is a 16-bit value dicated by driver that 3156 * will enable/disable different functionality. 3157 */ 3158 DMUB_CMD__PSR_SET_LEVEL = 4, 3159 3160 /** 3161 * Forces PSR enabled until an explicit PSR disable call. 3162 */ 3163 DMUB_CMD__PSR_FORCE_STATIC = 5, 3164 /** 3165 * Set vtotal in psr active for FreeSync PSR. 3166 */ 3167 DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE = 6, 3168 /** 3169 * Set PSR power option 3170 */ 3171 DMUB_CMD__SET_PSR_POWER_OPT = 7, 3172 }; 3173 3174 /** 3175 * Different PSR residency modes. 3176 * Different modes change the definition of PSR residency. 3177 */ 3178 enum psr_residency_mode { 3179 PSR_RESIDENCY_MODE_PHY = 0, 3180 PSR_RESIDENCY_MODE_ALPM, 3181 PSR_RESIDENCY_MODE_ENABLEMENT_PERIOD, 3182 /* Do not add below. */ 3183 PSR_RESIDENCY_MODE_LAST_ELEMENT, 3184 }; 3185 3186 enum dmub_cmd_fams_type { 3187 DMUB_CMD__FAMS_SETUP_FW_CTRL = 0, 3188 DMUB_CMD__FAMS_DRR_UPDATE = 1, 3189 DMUB_CMD__HANDLE_SUBVP_CMD = 2, // specifically for SubVP cmd 3190 /** 3191 * For SubVP set manual trigger in FW because it 3192 * triggers DRR_UPDATE_PENDING which SubVP relies 3193 * on (for any SubVP cases that use a DRR display) 3194 */ 3195 DMUB_CMD__FAMS_SET_MANUAL_TRIGGER = 3, 3196 DMUB_CMD__FAMS2_CONFIG = 4, 3197 DMUB_CMD__FAMS2_DRR_UPDATE = 5, 3198 DMUB_CMD__FAMS2_FLIP = 6, 3199 DMUB_CMD__FAMS2_IB_CONFIG = 7, 3200 }; 3201 3202 /** 3203 * PSR versions. 3204 */ 3205 enum psr_version { 3206 /** 3207 * PSR version 1. 3208 */ 3209 PSR_VERSION_1 = 0, 3210 /** 3211 * Freesync PSR SU. 3212 */ 3213 PSR_VERSION_SU_1 = 1, 3214 /** 3215 * PSR not supported. 3216 */ 3217 PSR_VERSION_UNSUPPORTED = 0xFF, // psr_version field is only 8 bits wide 3218 }; 3219 3220 /** 3221 * PHY Link rate for DP. 3222 */ 3223 enum phy_link_rate { 3224 /** 3225 * not supported. 3226 */ 3227 PHY_RATE_UNKNOWN = 0, 3228 /** 3229 * Rate_1 (RBR) - 1.62 Gbps/Lane 3230 */ 3231 PHY_RATE_162 = 1, 3232 /** 3233 * Rate_2 - 2.16 Gbps/Lane 3234 */ 3235 PHY_RATE_216 = 2, 3236 /** 3237 * Rate_3 - 2.43 Gbps/Lane 3238 */ 3239 PHY_RATE_243 = 3, 3240 /** 3241 * Rate_4 (HBR) - 2.70 Gbps/Lane 3242 */ 3243 PHY_RATE_270 = 4, 3244 /** 3245 * Rate_5 (RBR2)- 3.24 Gbps/Lane 3246 */ 3247 PHY_RATE_324 = 5, 3248 /** 3249 * Rate_6 - 4.32 Gbps/Lane 3250 */ 3251 PHY_RATE_432 = 6, 3252 /** 3253 * Rate_7 (HBR2)- 5.40 Gbps/Lane 3254 */ 3255 PHY_RATE_540 = 7, 3256 /** 3257 * Rate_8 (HBR3)- 8.10 Gbps/Lane 3258 */ 3259 PHY_RATE_810 = 8, 3260 /** 3261 * UHBR10 - 10.0 Gbps/Lane 3262 */ 3263 PHY_RATE_1000 = 9, 3264 /** 3265 * UHBR13.5 - 13.5 Gbps/Lane 3266 */ 3267 PHY_RATE_1350 = 10, 3268 /** 3269 * UHBR10 - 20.0 Gbps/Lane 3270 */ 3271 PHY_RATE_2000 = 11, 3272 3273 PHY_RATE_675 = 12, 3274 /** 3275 * Rate 12 - 6.75 Gbps/Lane 3276 */ 3277 }; 3278 3279 /** 3280 * enum dmub_phy_fsm_state - PHY FSM states. 3281 * PHY FSM state to transit to during PSR enable/disable. 3282 */ 3283 enum dmub_phy_fsm_state { 3284 DMUB_PHY_FSM_POWER_UP_DEFAULT = 0, 3285 DMUB_PHY_FSM_RESET, 3286 DMUB_PHY_FSM_RESET_RELEASED, 3287 DMUB_PHY_FSM_SRAM_LOAD_DONE, 3288 DMUB_PHY_FSM_INITIALIZED, 3289 DMUB_PHY_FSM_CALIBRATED, 3290 DMUB_PHY_FSM_CALIBRATED_LP, 3291 DMUB_PHY_FSM_CALIBRATED_PG, 3292 DMUB_PHY_FSM_POWER_DOWN, 3293 DMUB_PHY_FSM_PLL_EN, 3294 DMUB_PHY_FSM_TX_EN, 3295 DMUB_PHY_FSM_TX_EN_TEST_MODE, 3296 DMUB_PHY_FSM_FAST_LP, 3297 DMUB_PHY_FSM_P2_PLL_OFF_CPM, 3298 DMUB_PHY_FSM_P2_PLL_OFF_PG, 3299 DMUB_PHY_FSM_P2_PLL_OFF, 3300 DMUB_PHY_FSM_P2_PLL_ON, 3301 }; 3302 3303 /** 3304 * Data passed from driver to FW in a DMUB_CMD__PSR_COPY_SETTINGS command. 3305 */ 3306 struct dmub_cmd_psr_copy_settings_data { 3307 /** 3308 * Flags that can be set by driver to change some PSR behaviour. 3309 */ 3310 union dmub_psr_debug_flags debug; 3311 /** 3312 * 16-bit value dicated by driver that will enable/disable different functionality. 3313 */ 3314 uint16_t psr_level; 3315 /** 3316 * DPP HW instance. 3317 */ 3318 uint8_t dpp_inst; 3319 /** 3320 * MPCC HW instance. 3321 * Not used in dmub fw, 3322 * dmub fw will get active opp by reading odm registers. 3323 */ 3324 uint8_t mpcc_inst; 3325 /** 3326 * OPP HW instance. 3327 * Not used in dmub fw, 3328 * dmub fw will get active opp by reading odm registers. 3329 */ 3330 uint8_t opp_inst; 3331 /** 3332 * OTG HW instance. 3333 */ 3334 uint8_t otg_inst; 3335 /** 3336 * DIG FE HW instance. 3337 */ 3338 uint8_t digfe_inst; 3339 /** 3340 * DIG BE HW instance. 3341 */ 3342 uint8_t digbe_inst; 3343 /** 3344 * DP PHY HW instance. 3345 */ 3346 uint8_t dpphy_inst; 3347 /** 3348 * AUX HW instance. 3349 */ 3350 uint8_t aux_inst; 3351 /** 3352 * Determines if SMU optimzations are enabled/disabled. 3353 */ 3354 uint8_t smu_optimizations_en; 3355 /** 3356 * Unused. 3357 * TODO: Remove. 3358 */ 3359 uint8_t frame_delay; 3360 /** 3361 * If RFB setup time is greater than the total VBLANK time, 3362 * it is not possible for the sink to capture the video frame 3363 * in the same frame the SDP is sent. In this case, 3364 * the frame capture indication bit should be set and an extra 3365 * static frame should be transmitted to the sink. 3366 */ 3367 uint8_t frame_cap_ind; 3368 /** 3369 * Granularity of Y offset supported by sink. 3370 */ 3371 uint8_t su_y_granularity; 3372 /** 3373 * Indicates whether sink should start capturing 3374 * immediately following active scan line, 3375 * or starting with the 2nd active scan line. 3376 */ 3377 uint8_t line_capture_indication; 3378 /** 3379 * Multi-display optimizations are implemented on certain ASICs. 3380 */ 3381 uint8_t multi_disp_optimizations_en; 3382 /** 3383 * The last possible line SDP may be transmitted without violating 3384 * the RFB setup time or entering the active video frame. 3385 */ 3386 uint16_t init_sdp_deadline; 3387 /** 3388 * @ rate_control_caps : Indicate FreeSync PSR Sink Capabilities 3389 */ 3390 uint8_t rate_control_caps ; 3391 /* 3392 * Force PSRSU always doing full frame update 3393 */ 3394 uint8_t force_ffu_mode; 3395 /** 3396 * Length of each horizontal line in us. 3397 */ 3398 uint32_t line_time_in_us; 3399 /** 3400 * FEC enable status in driver 3401 */ 3402 uint8_t fec_enable_status; 3403 /** 3404 * FEC re-enable delay when PSR exit. 3405 * unit is 100us, range form 0~255(0xFF). 3406 */ 3407 uint8_t fec_enable_delay_in100us; 3408 /** 3409 * PSR control version. 3410 */ 3411 uint8_t cmd_version; 3412 /** 3413 * Panel Instance. 3414 * Panel instance to identify which psr_state to use 3415 * Currently the support is only for 0 or 1 3416 */ 3417 uint8_t panel_inst; 3418 /* 3419 * DSC enable status in driver 3420 */ 3421 uint8_t dsc_enable_status; 3422 /* 3423 * Use FSM state for PSR power up/down 3424 */ 3425 uint8_t use_phy_fsm; 3426 /** 3427 * frame delay for frame re-lock 3428 */ 3429 uint8_t relock_delay_frame_cnt; 3430 /** 3431 * esd recovery indicate. 3432 */ 3433 uint8_t esd_recovery; 3434 /** 3435 * DSC Slice height. 3436 */ 3437 uint16_t dsc_slice_height; 3438 /** 3439 * Some panels request main link off before xth vertical line 3440 */ 3441 uint16_t poweroff_before_vertical_line; 3442 /** 3443 * Some panels cannot handle idle pattern during PSR entry. 3444 * To power down phy before disable stream to avoid sending 3445 * idle pattern. 3446 */ 3447 uint8_t power_down_phy_before_disable_stream; 3448 }; 3449 3450 /** 3451 * Definition of a DMUB_CMD__PSR_COPY_SETTINGS command. 3452 */ 3453 struct dmub_rb_cmd_psr_copy_settings { 3454 /** 3455 * Command header. 3456 */ 3457 struct dmub_cmd_header header; 3458 /** 3459 * Data passed from driver to FW in a DMUB_CMD__PSR_COPY_SETTINGS command. 3460 */ 3461 struct dmub_cmd_psr_copy_settings_data psr_copy_settings_data; 3462 }; 3463 3464 /** 3465 * Data passed from driver to FW in a DMUB_CMD__PSR_SET_LEVEL command. 3466 */ 3467 struct dmub_cmd_psr_set_level_data { 3468 /** 3469 * 16-bit value dicated by driver that will enable/disable different functionality. 3470 */ 3471 uint16_t psr_level; 3472 /** 3473 * PSR control version. 3474 */ 3475 uint8_t cmd_version; 3476 /** 3477 * Panel Instance. 3478 * Panel instance to identify which psr_state to use 3479 * Currently the support is only for 0 or 1 3480 */ 3481 uint8_t panel_inst; 3482 }; 3483 3484 /** 3485 * Definition of a DMUB_CMD__PSR_SET_LEVEL command. 3486 */ 3487 struct dmub_rb_cmd_psr_set_level { 3488 /** 3489 * Command header. 3490 */ 3491 struct dmub_cmd_header header; 3492 /** 3493 * Definition of a DMUB_CMD__PSR_SET_LEVEL command. 3494 */ 3495 struct dmub_cmd_psr_set_level_data psr_set_level_data; 3496 }; 3497 3498 struct dmub_rb_cmd_psr_enable_data { 3499 /** 3500 * PSR control version. 3501 */ 3502 uint8_t cmd_version; 3503 /** 3504 * Panel Instance. 3505 * Panel instance to identify which psr_state to use 3506 * Currently the support is only for 0 or 1 3507 */ 3508 uint8_t panel_inst; 3509 /** 3510 * Phy state to enter. 3511 * Values to use are defined in dmub_phy_fsm_state 3512 */ 3513 uint8_t phy_fsm_state; 3514 /** 3515 * Phy rate for DP - RBR/HBR/HBR2/HBR3. 3516 * Set this using enum phy_link_rate. 3517 * This does not support HDMI/DP2 for now. 3518 */ 3519 uint8_t phy_rate; 3520 }; 3521 3522 /** 3523 * Definition of a DMUB_CMD__PSR_ENABLE command. 3524 * PSR enable/disable is controlled using the sub_type. 3525 */ 3526 struct dmub_rb_cmd_psr_enable { 3527 /** 3528 * Command header. 3529 */ 3530 struct dmub_cmd_header header; 3531 3532 struct dmub_rb_cmd_psr_enable_data data; 3533 }; 3534 3535 /** 3536 * Data passed from driver to FW in a DMUB_CMD__PSR_SET_VERSION command. 3537 */ 3538 struct dmub_cmd_psr_set_version_data { 3539 /** 3540 * PSR version that FW should implement. 3541 */ 3542 enum psr_version version; 3543 /** 3544 * PSR control version. 3545 */ 3546 uint8_t cmd_version; 3547 /** 3548 * Panel Instance. 3549 * Panel instance to identify which psr_state to use 3550 * Currently the support is only for 0 or 1 3551 */ 3552 uint8_t panel_inst; 3553 /** 3554 * Explicit padding to 4 byte boundary. 3555 */ 3556 uint8_t pad[2]; 3557 }; 3558 3559 /** 3560 * Definition of a DMUB_CMD__PSR_SET_VERSION command. 3561 */ 3562 struct dmub_rb_cmd_psr_set_version { 3563 /** 3564 * Command header. 3565 */ 3566 struct dmub_cmd_header header; 3567 /** 3568 * Data passed from driver to FW in a DMUB_CMD__PSR_SET_VERSION command. 3569 */ 3570 struct dmub_cmd_psr_set_version_data psr_set_version_data; 3571 }; 3572 3573 struct dmub_cmd_psr_force_static_data { 3574 /** 3575 * PSR control version. 3576 */ 3577 uint8_t cmd_version; 3578 /** 3579 * Panel Instance. 3580 * Panel instance to identify which psr_state to use 3581 * Currently the support is only for 0 or 1 3582 */ 3583 uint8_t panel_inst; 3584 /** 3585 * Explicit padding to 4 byte boundary. 3586 */ 3587 uint8_t pad[2]; 3588 }; 3589 3590 /** 3591 * Definition of a DMUB_CMD__PSR_FORCE_STATIC command. 3592 */ 3593 struct dmub_rb_cmd_psr_force_static { 3594 /** 3595 * Command header. 3596 */ 3597 struct dmub_cmd_header header; 3598 /** 3599 * Data passed from driver to FW in a DMUB_CMD__PSR_FORCE_STATIC command. 3600 */ 3601 struct dmub_cmd_psr_force_static_data psr_force_static_data; 3602 }; 3603 3604 /** 3605 * PSR SU debug flags. 3606 */ 3607 union dmub_psr_su_debug_flags { 3608 /** 3609 * PSR SU debug flags. 3610 */ 3611 struct { 3612 /** 3613 * Update dirty rect in SW only. 3614 */ 3615 uint8_t update_dirty_rect_only : 1; 3616 /** 3617 * Reset the cursor/plane state before processing the call. 3618 */ 3619 uint8_t reset_state : 1; 3620 } bitfields; 3621 3622 /** 3623 * Union for debug flags. 3624 */ 3625 uint32_t u32All; 3626 }; 3627 3628 /** 3629 * Data passed from driver to FW in a DMUB_CMD__UPDATE_DIRTY_RECT command. 3630 * This triggers a selective update for PSR SU. 3631 */ 3632 struct dmub_cmd_update_dirty_rect_data { 3633 /** 3634 * Dirty rects from OS. 3635 */ 3636 struct dmub_rect src_dirty_rects[DMUB_MAX_DIRTY_RECTS]; 3637 /** 3638 * PSR SU debug flags. 3639 */ 3640 union dmub_psr_su_debug_flags debug_flags; 3641 /** 3642 * OTG HW instance. 3643 */ 3644 uint8_t pipe_idx; 3645 /** 3646 * Number of dirty rects. 3647 */ 3648 uint8_t dirty_rect_count; 3649 /** 3650 * PSR control version. 3651 */ 3652 uint8_t cmd_version; 3653 /** 3654 * Panel Instance. 3655 * Panel instance to identify which psr_state to use 3656 * Currently the support is only for 0 or 1 3657 */ 3658 uint8_t panel_inst; 3659 }; 3660 3661 /** 3662 * Definition of a DMUB_CMD__UPDATE_DIRTY_RECT command. 3663 */ 3664 struct dmub_rb_cmd_update_dirty_rect { 3665 /** 3666 * Command header. 3667 */ 3668 struct dmub_cmd_header header; 3669 /** 3670 * Data passed from driver to FW in a DMUB_CMD__UPDATE_DIRTY_RECT command. 3671 */ 3672 struct dmub_cmd_update_dirty_rect_data update_dirty_rect_data; 3673 }; 3674 3675 /** 3676 * Data passed from driver to FW in a DMUB_CMD__UPDATE_CURSOR_INFO command. 3677 */ 3678 union dmub_reg_cursor_control_cfg { 3679 struct { 3680 uint32_t cur_enable: 1; 3681 uint32_t reser0: 3; 3682 uint32_t cur_2x_magnify: 1; 3683 uint32_t reser1: 3; 3684 uint32_t mode: 3; 3685 uint32_t reser2: 5; 3686 uint32_t pitch: 2; 3687 uint32_t reser3: 6; 3688 uint32_t line_per_chunk: 5; 3689 uint32_t reser4: 3; 3690 } bits; 3691 uint32_t raw; 3692 }; 3693 struct dmub_cursor_position_cache_hubp { 3694 union dmub_reg_cursor_control_cfg cur_ctl; 3695 union dmub_reg_position_cfg { 3696 struct { 3697 uint32_t cur_x_pos: 16; 3698 uint32_t cur_y_pos: 16; 3699 } bits; 3700 uint32_t raw; 3701 } position; 3702 union dmub_reg_hot_spot_cfg { 3703 struct { 3704 uint32_t hot_x: 16; 3705 uint32_t hot_y: 16; 3706 } bits; 3707 uint32_t raw; 3708 } hot_spot; 3709 union dmub_reg_dst_offset_cfg { 3710 struct { 3711 uint32_t dst_x_offset: 13; 3712 uint32_t reserved: 19; 3713 } bits; 3714 uint32_t raw; 3715 } dst_offset; 3716 }; 3717 3718 union dmub_reg_cur0_control_cfg { 3719 struct { 3720 uint32_t cur0_enable: 1; 3721 uint32_t expansion_mode: 1; 3722 uint32_t reser0: 1; 3723 uint32_t cur0_rom_en: 1; 3724 uint32_t mode: 3; 3725 uint32_t reserved: 25; 3726 } bits; 3727 uint32_t raw; 3728 }; 3729 struct dmub_cursor_position_cache_dpp { 3730 union dmub_reg_cur0_control_cfg cur0_ctl; 3731 }; 3732 struct dmub_cursor_position_cfg { 3733 struct dmub_cursor_position_cache_hubp pHubp; 3734 struct dmub_cursor_position_cache_dpp pDpp; 3735 uint8_t pipe_idx; 3736 /* 3737 * Padding is required. To be 4 Bytes Aligned. 3738 */ 3739 uint8_t padding[3]; 3740 }; 3741 3742 struct dmub_cursor_attribute_cache_hubp { 3743 uint32_t SURFACE_ADDR_HIGH; 3744 uint32_t SURFACE_ADDR; 3745 union dmub_reg_cursor_control_cfg cur_ctl; 3746 union dmub_reg_cursor_size_cfg { 3747 struct { 3748 uint32_t width: 16; 3749 uint32_t height: 16; 3750 } bits; 3751 uint32_t raw; 3752 } size; 3753 union dmub_reg_cursor_settings_cfg { 3754 struct { 3755 uint32_t dst_y_offset: 8; 3756 uint32_t chunk_hdl_adjust: 2; 3757 uint32_t reserved: 22; 3758 } bits; 3759 uint32_t raw; 3760 } settings; 3761 }; 3762 struct dmub_cursor_attribute_cache_dpp { 3763 union dmub_reg_cur0_control_cfg cur0_ctl; 3764 }; 3765 struct dmub_cursor_attributes_cfg { 3766 struct dmub_cursor_attribute_cache_hubp aHubp; 3767 struct dmub_cursor_attribute_cache_dpp aDpp; 3768 }; 3769 3770 struct dmub_cmd_update_cursor_payload0 { 3771 /** 3772 * Cursor dirty rects. 3773 */ 3774 struct dmub_rect cursor_rect; 3775 /** 3776 * PSR SU debug flags. 3777 */ 3778 union dmub_psr_su_debug_flags debug_flags; 3779 /** 3780 * Cursor enable/disable. 3781 */ 3782 uint8_t enable; 3783 /** 3784 * OTG HW instance. 3785 */ 3786 uint8_t pipe_idx; 3787 /** 3788 * PSR control version. 3789 */ 3790 uint8_t cmd_version; 3791 /** 3792 * Panel Instance. 3793 * Panel instance to identify which psr_state to use 3794 * Currently the support is only for 0 or 1 3795 */ 3796 uint8_t panel_inst; 3797 /** 3798 * Cursor Position Register. 3799 * Registers contains Hubp & Dpp modules 3800 */ 3801 struct dmub_cursor_position_cfg position_cfg; 3802 }; 3803 3804 struct dmub_cmd_update_cursor_payload1 { 3805 struct dmub_cursor_attributes_cfg attribute_cfg; 3806 }; 3807 3808 union dmub_cmd_update_cursor_info_data { 3809 struct dmub_cmd_update_cursor_payload0 payload0; 3810 struct dmub_cmd_update_cursor_payload1 payload1; 3811 }; 3812 /** 3813 * Definition of a DMUB_CMD__UPDATE_CURSOR_INFO command. 3814 */ 3815 struct dmub_rb_cmd_update_cursor_info { 3816 /** 3817 * Command header. 3818 */ 3819 struct dmub_cmd_header header; 3820 /** 3821 * Data passed from driver to FW in a DMUB_CMD__UPDATE_CURSOR_INFO command. 3822 */ 3823 union dmub_cmd_update_cursor_info_data update_cursor_info_data; 3824 }; 3825 3826 /** 3827 * Data passed from driver to FW in a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. 3828 */ 3829 struct dmub_cmd_psr_set_vtotal_data { 3830 /** 3831 * 16-bit value dicated by driver that indicates the vtotal in PSR active requirement when screen idle.. 3832 */ 3833 uint16_t psr_vtotal_idle; 3834 /** 3835 * PSR control version. 3836 */ 3837 uint8_t cmd_version; 3838 /** 3839 * Panel Instance. 3840 * Panel instance to identify which psr_state to use 3841 * Currently the support is only for 0 or 1 3842 */ 3843 uint8_t panel_inst; 3844 /* 3845 * 16-bit value dicated by driver that indicates the vtotal in PSR active requirement when doing SU/FFU. 3846 */ 3847 uint16_t psr_vtotal_su; 3848 /** 3849 * Explicit padding to 4 byte boundary. 3850 */ 3851 uint8_t pad2[2]; 3852 }; 3853 3854 /** 3855 * Definition of a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. 3856 */ 3857 struct dmub_rb_cmd_psr_set_vtotal { 3858 /** 3859 * Command header. 3860 */ 3861 struct dmub_cmd_header header; 3862 /** 3863 * Definition of a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. 3864 */ 3865 struct dmub_cmd_psr_set_vtotal_data psr_set_vtotal_data; 3866 }; 3867 3868 /** 3869 * Data passed from driver to FW in a DMUB_CMD__SET_PSR_POWER_OPT command. 3870 */ 3871 struct dmub_cmd_psr_set_power_opt_data { 3872 /** 3873 * PSR control version. 3874 */ 3875 uint8_t cmd_version; 3876 /** 3877 * Panel Instance. 3878 * Panel instance to identify which psr_state to use 3879 * Currently the support is only for 0 or 1 3880 */ 3881 uint8_t panel_inst; 3882 /** 3883 * Explicit padding to 4 byte boundary. 3884 */ 3885 uint8_t pad[2]; 3886 /** 3887 * PSR power option 3888 */ 3889 uint32_t power_opt; 3890 }; 3891 3892 /** 3893 * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command. 3894 */ 3895 struct dmub_rb_cmd_psr_set_power_opt { 3896 /** 3897 * Command header. 3898 */ 3899 struct dmub_cmd_header header; 3900 /** 3901 * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command. 3902 */ 3903 struct dmub_cmd_psr_set_power_opt_data psr_set_power_opt_data; 3904 }; 3905 3906 enum dmub_alpm_mode { 3907 ALPM_AUXWAKE = 0, 3908 ALPM_AUXLESS = 1, 3909 ALPM_UNSUPPORTED = 2, 3910 }; 3911 3912 /** 3913 * Definition of Replay Residency GPINT command. 3914 * Bit[0] - Residency mode for Revision 0 3915 * Bit[1] - Enable/Disable state 3916 * Bit[2-3] - Revision number 3917 * Bit[4-7] - Residency mode for Revision 1 3918 * Bit[8] - Panel instance 3919 * Bit[9-15] - Reserved 3920 */ 3921 3922 enum pr_residency_mode { 3923 PR_RESIDENCY_MODE_PHY = 0x0, 3924 PR_RESIDENCY_MODE_ALPM, 3925 PR_RESIDENCY_MODE_IPS2, 3926 PR_RESIDENCY_MODE_FRAME_CNT, 3927 PR_RESIDENCY_MODE_ENABLEMENT_PERIOD, 3928 }; 3929 3930 #define REPLAY_RESIDENCY_MODE_SHIFT (0) 3931 #define REPLAY_RESIDENCY_ENABLE_SHIFT (1) 3932 #define REPLAY_RESIDENCY_REVISION_SHIFT (2) 3933 #define REPLAY_RESIDENCY_MODE2_SHIFT (4) 3934 3935 #define REPLAY_RESIDENCY_MODE_MASK (0x1 << REPLAY_RESIDENCY_MODE_SHIFT) 3936 # define REPLAY_RESIDENCY_FIELD_MODE_PHY (0x0 << REPLAY_RESIDENCY_MODE_SHIFT) 3937 # define REPLAY_RESIDENCY_FIELD_MODE_ALPM (0x1 << REPLAY_RESIDENCY_MODE_SHIFT) 3938 3939 #define REPLAY_RESIDENCY_MODE2_MASK (0xF << REPLAY_RESIDENCY_MODE2_SHIFT) 3940 # define REPLAY_RESIDENCY_FIELD_MODE2_IPS (0x1 << REPLAY_RESIDENCY_MODE2_SHIFT) 3941 # define REPLAY_RESIDENCY_FIELD_MODE2_FRAME_CNT (0x2 << REPLAY_RESIDENCY_MODE2_SHIFT) 3942 # define REPLAY_RESIDENCY_FIELD_MODE2_EN_PERIOD (0x3 << REPLAY_RESIDENCY_MODE2_SHIFT) 3943 3944 #define REPLAY_RESIDENCY_ENABLE_MASK (0x1 << REPLAY_RESIDENCY_ENABLE_SHIFT) 3945 # define REPLAY_RESIDENCY_DISABLE (0x0 << REPLAY_RESIDENCY_ENABLE_SHIFT) 3946 # define REPLAY_RESIDENCY_ENABLE (0x1 << REPLAY_RESIDENCY_ENABLE_SHIFT) 3947 3948 #define REPLAY_RESIDENCY_REVISION_MASK (0x3 << REPLAY_RESIDENCY_REVISION_SHIFT) 3949 # define REPLAY_RESIDENCY_REVISION_0 (0x0 << REPLAY_RESIDENCY_REVISION_SHIFT) 3950 # define REPLAY_RESIDENCY_REVISION_1 (0x1 << REPLAY_RESIDENCY_REVISION_SHIFT) 3951 3952 /** 3953 * Definition of a replay_state. 3954 */ 3955 enum replay_state { 3956 REPLAY_STATE_0 = 0x0, 3957 REPLAY_STATE_1 = 0x10, 3958 REPLAY_STATE_1A = 0x11, 3959 REPLAY_STATE_2 = 0x20, 3960 REPLAY_STATE_2A = 0x21, 3961 REPLAY_STATE_3 = 0x30, 3962 REPLAY_STATE_3INIT = 0x31, 3963 REPLAY_STATE_4 = 0x40, 3964 REPLAY_STATE_4A = 0x41, 3965 REPLAY_STATE_4B = 0x42, 3966 REPLAY_STATE_4C = 0x43, 3967 REPLAY_STATE_4D = 0x44, 3968 REPLAY_STATE_4E = 0x45, 3969 REPLAY_STATE_4B_LOCKED = 0x4A, 3970 REPLAY_STATE_4C_UNLOCKED = 0x4B, 3971 REPLAY_STATE_5 = 0x50, 3972 REPLAY_STATE_5A = 0x51, 3973 REPLAY_STATE_5B = 0x52, 3974 REPLAY_STATE_5A_LOCKED = 0x5A, 3975 REPLAY_STATE_5B_UNLOCKED = 0x5B, 3976 REPLAY_STATE_6 = 0x60, 3977 REPLAY_STATE_6A = 0x61, 3978 REPLAY_STATE_6B = 0x62, 3979 REPLAY_STATE_INVALID = 0xFF, 3980 }; 3981 3982 /** 3983 * Replay command sub-types. 3984 */ 3985 enum dmub_cmd_replay_type { 3986 /** 3987 * Copy driver-calculated parameters to REPLAY state. 3988 */ 3989 DMUB_CMD__REPLAY_COPY_SETTINGS = 0, 3990 /** 3991 * Enable REPLAY. 3992 */ 3993 DMUB_CMD__REPLAY_ENABLE = 1, 3994 /** 3995 * Set Replay power option. 3996 */ 3997 DMUB_CMD__SET_REPLAY_POWER_OPT = 2, 3998 /** 3999 * Set coasting vtotal. 4000 */ 4001 DMUB_CMD__REPLAY_SET_COASTING_VTOTAL = 3, 4002 /** 4003 * Set power opt and coasting vtotal. 4004 */ 4005 DMUB_CMD__REPLAY_SET_POWER_OPT_AND_COASTING_VTOTAL = 4, 4006 /** 4007 * Set disabled iiming sync. 4008 */ 4009 DMUB_CMD__REPLAY_SET_TIMING_SYNC_SUPPORTED = 5, 4010 /** 4011 * Set Residency Frameupdate Timer. 4012 */ 4013 DMUB_CMD__REPLAY_SET_RESIDENCY_FRAMEUPDATE_TIMER = 6, 4014 /** 4015 * Set pseudo vtotal 4016 */ 4017 DMUB_CMD__REPLAY_SET_PSEUDO_VTOTAL = 7, 4018 /** 4019 * Set adaptive sync sdp enabled 4020 */ 4021 DMUB_CMD__REPLAY_DISABLED_ADAPTIVE_SYNC_SDP = 8, 4022 /** 4023 * Set Replay General command. 4024 */ 4025 DMUB_CMD__REPLAY_SET_GENERAL_CMD = 16, 4026 }; 4027 4028 /** 4029 * Replay general command sub-types. 4030 */ 4031 enum dmub_cmd_replay_general_subtype { 4032 REPLAY_GENERAL_CMD_NOT_SUPPORTED = -1, 4033 /** 4034 * TODO: For backward compatible, allow new command only. 4035 * REPLAY_GENERAL_CMD_SET_TIMING_SYNC_SUPPORTED, 4036 * REPLAY_GENERAL_CMD_SET_RESIDENCY_FRAMEUPDATE_TIMER, 4037 * REPLAY_GENERAL_CMD_SET_PSEUDO_VTOTAL, 4038 */ 4039 REPLAY_GENERAL_CMD_DISABLED_ADAPTIVE_SYNC_SDP, 4040 REPLAY_GENERAL_CMD_DISABLED_DESYNC_ERROR_DETECTION, 4041 REPLAY_GENERAL_CMD_UPDATE_ERROR_STATUS, 4042 REPLAY_GENERAL_CMD_SET_LOW_RR_ACTIVATE, 4043 }; 4044 4045 struct dmub_alpm_auxless_data { 4046 uint16_t lfps_setup_ns; 4047 uint16_t lfps_period_ns; 4048 uint16_t lfps_silence_ns; 4049 uint16_t lfps_t1_t2_override_us; 4050 short lfps_t1_t2_offset_us; 4051 uint8_t lttpr_count; 4052 /* 4053 * Padding to align structure to 4 byte boundary. 4054 */ 4055 uint8_t pad[1]; 4056 }; 4057 4058 /** 4059 * Data passed from driver to FW in a DMUB_CMD__REPLAY_COPY_SETTINGS command. 4060 */ 4061 struct dmub_cmd_replay_copy_settings_data { 4062 /** 4063 * Flags that can be set by driver to change some replay behaviour. 4064 */ 4065 union replay_debug_flags debug; 4066 4067 /** 4068 * @flags: Flags used to determine feature functionality. 4069 */ 4070 union replay_hw_flags flags; 4071 4072 /** 4073 * DPP HW instance. 4074 */ 4075 uint8_t dpp_inst; 4076 /** 4077 * OTG HW instance. 4078 */ 4079 uint8_t otg_inst; 4080 /** 4081 * DIG FE HW instance. 4082 */ 4083 uint8_t digfe_inst; 4084 /** 4085 * DIG BE HW instance. 4086 */ 4087 uint8_t digbe_inst; 4088 /** 4089 * AUX HW instance. 4090 */ 4091 uint8_t aux_inst; 4092 /** 4093 * Panel Instance. 4094 * Panel isntance to identify which psr_state to use 4095 * Currently the support is only for 0 or 1 4096 */ 4097 uint8_t panel_inst; 4098 /** 4099 * @pixel_deviation_per_line: Indicate the maximum pixel deviation per line compare 4100 * to Source timing when Sink maintains coasting vtotal during the Replay normal sleep mode 4101 */ 4102 uint8_t pixel_deviation_per_line; 4103 /** 4104 * @max_deviation_line: The max number of deviation line that can keep the timing 4105 * synchronized between the Source and Sink during Replay normal sleep mode. 4106 */ 4107 uint8_t max_deviation_line; 4108 /** 4109 * Length of each horizontal line in ns. 4110 */ 4111 uint32_t line_time_in_ns; 4112 /** 4113 * PHY instance. 4114 */ 4115 uint8_t dpphy_inst; 4116 /** 4117 * Determines if SMU optimzations are enabled/disabled. 4118 */ 4119 uint8_t smu_optimizations_en; 4120 /** 4121 * Determines if timing sync are enabled/disabled. 4122 */ 4123 uint8_t replay_timing_sync_supported; 4124 /* 4125 * Use FSM state for Replay power up/down 4126 */ 4127 uint8_t use_phy_fsm; 4128 /** 4129 * Use for AUX-less ALPM LFPS wake operation 4130 */ 4131 struct dmub_alpm_auxless_data auxless_alpm_data; 4132 /** 4133 * @hpo_stream_enc_inst: HPO stream encoder instance 4134 */ 4135 uint8_t hpo_stream_enc_inst; 4136 /** 4137 * @hpo_link_enc_inst: HPO link encoder instance 4138 */ 4139 uint8_t hpo_link_enc_inst; 4140 /** 4141 * @pad: Align structure to 4 byte boundary. 4142 */ 4143 uint8_t pad[2]; 4144 }; 4145 4146 /** 4147 * Definition of a DMUB_CMD__REPLAY_COPY_SETTINGS command. 4148 */ 4149 struct dmub_rb_cmd_replay_copy_settings { 4150 /** 4151 * Command header. 4152 */ 4153 struct dmub_cmd_header header; 4154 /** 4155 * Data passed from driver to FW in a DMUB_CMD__REPLAY_COPY_SETTINGS command. 4156 */ 4157 struct dmub_cmd_replay_copy_settings_data replay_copy_settings_data; 4158 }; 4159 4160 /** 4161 * Replay disable / enable state for dmub_rb_cmd_replay_enable_data.enable 4162 */ 4163 enum replay_enable { 4164 /** 4165 * Disable REPLAY. 4166 */ 4167 REPLAY_DISABLE = 0, 4168 /** 4169 * Enable REPLAY. 4170 */ 4171 REPLAY_ENABLE = 1, 4172 }; 4173 4174 /** 4175 * Data passed from driver to FW in a DMUB_CMD__REPLAY_ENABLE command. 4176 */ 4177 struct dmub_rb_cmd_replay_enable_data { 4178 /** 4179 * Replay enable or disable. 4180 */ 4181 uint8_t enable; 4182 /** 4183 * Panel Instance. 4184 * Panel isntance to identify which replay_state to use 4185 * Currently the support is only for 0 or 1 4186 */ 4187 uint8_t panel_inst; 4188 /** 4189 * Phy state to enter. 4190 * Values to use are defined in dmub_phy_fsm_state 4191 */ 4192 uint8_t phy_fsm_state; 4193 /** 4194 * Phy rate for DP - RBR/HBR/HBR2/HBR3. 4195 * Set this using enum phy_link_rate. 4196 * This does not support HDMI/DP2 for now. 4197 */ 4198 uint8_t phy_rate; 4199 /** 4200 * @hpo_stream_enc_inst: HPO stream encoder instance 4201 */ 4202 uint8_t hpo_stream_enc_inst; 4203 /** 4204 * @hpo_link_enc_inst: HPO link encoder instance 4205 */ 4206 uint8_t hpo_link_enc_inst; 4207 /** 4208 * @pad: Align structure to 4 byte boundary. 4209 */ 4210 uint8_t pad[2]; 4211 }; 4212 4213 /** 4214 * Definition of a DMUB_CMD__REPLAY_ENABLE command. 4215 * Replay enable/disable is controlled using action in data. 4216 */ 4217 struct dmub_rb_cmd_replay_enable { 4218 /** 4219 * Command header. 4220 */ 4221 struct dmub_cmd_header header; 4222 4223 struct dmub_rb_cmd_replay_enable_data data; 4224 }; 4225 4226 /** 4227 * Data passed from driver to FW in a DMUB_CMD__SET_REPLAY_POWER_OPT command. 4228 */ 4229 struct dmub_cmd_replay_set_power_opt_data { 4230 /** 4231 * Panel Instance. 4232 * Panel isntance to identify which replay_state to use 4233 * Currently the support is only for 0 or 1 4234 */ 4235 uint8_t panel_inst; 4236 /** 4237 * Explicit padding to 4 byte boundary. 4238 */ 4239 uint8_t pad[3]; 4240 /** 4241 * REPLAY power option 4242 */ 4243 uint32_t power_opt; 4244 }; 4245 4246 /** 4247 * Data passed from driver to FW in a DMUB_CMD__REPLAY_SET_TIMING_SYNC_SUPPORTED command. 4248 */ 4249 struct dmub_cmd_replay_set_timing_sync_data { 4250 /** 4251 * Panel Instance. 4252 * Panel isntance to identify which replay_state to use 4253 * Currently the support is only for 0 or 1 4254 */ 4255 uint8_t panel_inst; 4256 /** 4257 * REPLAY set_timing_sync 4258 */ 4259 uint8_t timing_sync_supported; 4260 /** 4261 * Explicit padding to 4 byte boundary. 4262 */ 4263 uint8_t pad[2]; 4264 }; 4265 4266 /** 4267 * Data passed from driver to FW in a DMUB_CMD__REPLAY_SET_PSEUDO_VTOTAL command. 4268 */ 4269 struct dmub_cmd_replay_set_pseudo_vtotal { 4270 /** 4271 * Panel Instance. 4272 * Panel isntance to identify which replay_state to use 4273 * Currently the support is only for 0 or 1 4274 */ 4275 uint8_t panel_inst; 4276 /** 4277 * Source Vtotal that Replay + IPS + ABM full screen video src vtotal 4278 */ 4279 uint16_t vtotal; 4280 /** 4281 * Explicit padding to 4 byte boundary. 4282 */ 4283 uint8_t pad; 4284 }; 4285 struct dmub_cmd_replay_disabled_adaptive_sync_sdp_data { 4286 /** 4287 * Panel Instance. 4288 * Panel isntance to identify which replay_state to use 4289 * Currently the support is only for 0 or 1 4290 */ 4291 uint8_t panel_inst; 4292 /** 4293 * enabled: set adaptive sync sdp enabled 4294 */ 4295 uint8_t force_disabled; 4296 4297 uint8_t pad[2]; 4298 }; 4299 struct dmub_cmd_replay_set_general_cmd_data { 4300 /** 4301 * Panel Instance. 4302 * Panel isntance to identify which replay_state to use 4303 * Currently the support is only for 0 or 1 4304 */ 4305 uint8_t panel_inst; 4306 /** 4307 * subtype: replay general cmd sub type 4308 */ 4309 uint8_t subtype; 4310 4311 uint8_t pad[2]; 4312 /** 4313 * config data with param1 and param2 4314 */ 4315 uint32_t param1; 4316 4317 uint32_t param2; 4318 }; 4319 4320 /** 4321 * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. 4322 */ 4323 struct dmub_rb_cmd_replay_set_power_opt { 4324 /** 4325 * Command header. 4326 */ 4327 struct dmub_cmd_header header; 4328 /** 4329 * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. 4330 */ 4331 struct dmub_cmd_replay_set_power_opt_data replay_set_power_opt_data; 4332 }; 4333 4334 /** 4335 * Data passed from driver to FW in a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. 4336 */ 4337 struct dmub_cmd_replay_set_coasting_vtotal_data { 4338 /** 4339 * 16-bit value dicated by driver that indicates the coasting vtotal. 4340 */ 4341 uint16_t coasting_vtotal; 4342 /** 4343 * REPLAY control version. 4344 */ 4345 uint8_t cmd_version; 4346 /** 4347 * Panel Instance. 4348 * Panel isntance to identify which replay_state to use 4349 * Currently the support is only for 0 or 1 4350 */ 4351 uint8_t panel_inst; 4352 /** 4353 * 16-bit value dicated by driver that indicates the coasting vtotal high byte part. 4354 */ 4355 uint16_t coasting_vtotal_high; 4356 /** 4357 * Explicit padding to 4 byte boundary. 4358 */ 4359 uint8_t pad[2]; 4360 }; 4361 4362 /** 4363 * Definition of a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. 4364 */ 4365 struct dmub_rb_cmd_replay_set_coasting_vtotal { 4366 /** 4367 * Command header. 4368 */ 4369 struct dmub_cmd_header header; 4370 /** 4371 * Definition of a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. 4372 */ 4373 struct dmub_cmd_replay_set_coasting_vtotal_data replay_set_coasting_vtotal_data; 4374 }; 4375 4376 /** 4377 * Definition of a DMUB_CMD__REPLAY_SET_POWER_OPT_AND_COASTING_VTOTAL command. 4378 */ 4379 struct dmub_rb_cmd_replay_set_power_opt_and_coasting_vtotal { 4380 /** 4381 * Command header. 4382 */ 4383 struct dmub_cmd_header header; 4384 /** 4385 * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. 4386 */ 4387 struct dmub_cmd_replay_set_power_opt_data replay_set_power_opt_data; 4388 /** 4389 * Definition of a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. 4390 */ 4391 struct dmub_cmd_replay_set_coasting_vtotal_data replay_set_coasting_vtotal_data; 4392 }; 4393 4394 /** 4395 * Definition of a DMUB_CMD__REPLAY_SET_TIMING_SYNC_SUPPORTED command. 4396 */ 4397 struct dmub_rb_cmd_replay_set_timing_sync { 4398 /** 4399 * Command header. 4400 */ 4401 struct dmub_cmd_header header; 4402 /** 4403 * Definition of DMUB_CMD__REPLAY_SET_TIMING_SYNC_SUPPORTED command. 4404 */ 4405 struct dmub_cmd_replay_set_timing_sync_data replay_set_timing_sync_data; 4406 }; 4407 4408 /** 4409 * Definition of a DMUB_CMD__REPLAY_SET_PSEUDO_VTOTAL command. 4410 */ 4411 struct dmub_rb_cmd_replay_set_pseudo_vtotal { 4412 /** 4413 * Command header. 4414 */ 4415 struct dmub_cmd_header header; 4416 /** 4417 * Definition of DMUB_CMD__REPLAY_SET_PSEUDO_VTOTAL command. 4418 */ 4419 struct dmub_cmd_replay_set_pseudo_vtotal data; 4420 }; 4421 4422 /** 4423 * Definition of a DMUB_CMD__REPLAY_DISABLED_ADAPTIVE_SYNC_SDP command. 4424 */ 4425 struct dmub_rb_cmd_replay_disabled_adaptive_sync_sdp { 4426 /** 4427 * Command header. 4428 */ 4429 struct dmub_cmd_header header; 4430 /** 4431 * Definition of DMUB_CMD__REPLAY_DISABLED_ADAPTIVE_SYNC_SDP command. 4432 */ 4433 struct dmub_cmd_replay_disabled_adaptive_sync_sdp_data data; 4434 }; 4435 4436 /** 4437 * Definition of a DMUB_CMD__REPLAY_SET_GENERAL_CMD command. 4438 */ 4439 struct dmub_rb_cmd_replay_set_general_cmd { 4440 /** 4441 * Command header. 4442 */ 4443 struct dmub_cmd_header header; 4444 /** 4445 * Definition of DMUB_CMD__REPLAY_SET_GENERAL_CMD command. 4446 */ 4447 struct dmub_cmd_replay_set_general_cmd_data data; 4448 }; 4449 4450 /** 4451 * Data passed from driver to FW in DMUB_CMD__REPLAY_SET_RESIDENCY_FRAMEUPDATE_TIMER command. 4452 */ 4453 struct dmub_cmd_replay_frameupdate_timer_data { 4454 /** 4455 * Panel Instance. 4456 * Panel isntance to identify which replay_state to use 4457 * Currently the support is only for 0 or 1 4458 */ 4459 uint8_t panel_inst; 4460 /** 4461 * Replay Frameupdate Timer Enable or not 4462 */ 4463 uint8_t enable; 4464 /** 4465 * REPLAY force reflash frame update number 4466 */ 4467 uint16_t frameupdate_count; 4468 }; 4469 /** 4470 * Definition of DMUB_CMD__REPLAY_SET_RESIDENCY_FRAMEUPDATE_TIMER 4471 */ 4472 struct dmub_rb_cmd_replay_set_frameupdate_timer { 4473 /** 4474 * Command header. 4475 */ 4476 struct dmub_cmd_header header; 4477 /** 4478 * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. 4479 */ 4480 struct dmub_cmd_replay_frameupdate_timer_data data; 4481 }; 4482 4483 /** 4484 * Definition union of replay command set 4485 */ 4486 union dmub_replay_cmd_set { 4487 /** 4488 * Panel Instance. 4489 * Panel isntance to identify which replay_state to use 4490 * Currently the support is only for 0 or 1 4491 */ 4492 uint8_t panel_inst; 4493 /** 4494 * Definition of DMUB_CMD__REPLAY_SET_TIMING_SYNC_SUPPORTED command data. 4495 */ 4496 struct dmub_cmd_replay_set_timing_sync_data sync_data; 4497 /** 4498 * Definition of DMUB_CMD__REPLAY_SET_RESIDENCY_FRAMEUPDATE_TIMER command data. 4499 */ 4500 struct dmub_cmd_replay_frameupdate_timer_data timer_data; 4501 /** 4502 * Definition of DMUB_CMD__REPLAY_SET_PSEUDO_VTOTAL command data. 4503 */ 4504 struct dmub_cmd_replay_set_pseudo_vtotal pseudo_vtotal_data; 4505 /** 4506 * Definition of DMUB_CMD__REPLAY_DISABLED_ADAPTIVE_SYNC_SDP command data. 4507 */ 4508 struct dmub_cmd_replay_disabled_adaptive_sync_sdp_data disabled_adaptive_sync_sdp_data; 4509 /** 4510 * Definition of DMUB_CMD__REPLAY_SET_GENERAL_CMD command data. 4511 */ 4512 struct dmub_cmd_replay_set_general_cmd_data set_general_cmd_data; 4513 }; 4514 4515 /** 4516 * Set of HW components that can be locked. 4517 * 4518 * Note: If updating with more HW components, fields 4519 * in dmub_inbox0_cmd_lock_hw must be updated to match. 4520 */ 4521 union dmub_hw_lock_flags { 4522 /** 4523 * Set of HW components that can be locked. 4524 */ 4525 struct { 4526 /** 4527 * Lock/unlock OTG master update lock. 4528 */ 4529 uint8_t lock_pipe : 1; 4530 /** 4531 * Lock/unlock cursor. 4532 */ 4533 uint8_t lock_cursor : 1; 4534 /** 4535 * Lock/unlock global update lock. 4536 */ 4537 uint8_t lock_dig : 1; 4538 /** 4539 * Triple buffer lock requires additional hw programming to usual OTG master lock. 4540 */ 4541 uint8_t triple_buffer_lock : 1; 4542 } bits; 4543 4544 /** 4545 * Union for HW Lock flags. 4546 */ 4547 uint8_t u8All; 4548 }; 4549 4550 /** 4551 * Instances of HW to be locked. 4552 * 4553 * Note: If updating with more HW components, fields 4554 * in dmub_inbox0_cmd_lock_hw must be updated to match. 4555 */ 4556 struct dmub_hw_lock_inst_flags { 4557 /** 4558 * OTG HW instance for OTG master update lock. 4559 */ 4560 uint8_t otg_inst; 4561 /** 4562 * OPP instance for cursor lock. 4563 */ 4564 uint8_t opp_inst; 4565 /** 4566 * OTG HW instance for global update lock. 4567 * TODO: Remove, and re-use otg_inst. 4568 */ 4569 uint8_t dig_inst; 4570 /** 4571 * Explicit pad to 4 byte boundary. 4572 */ 4573 uint8_t pad; 4574 }; 4575 4576 /** 4577 * Clients that can acquire the HW Lock Manager. 4578 * 4579 * Note: If updating with more clients, fields in 4580 * dmub_inbox0_cmd_lock_hw must be updated to match. 4581 */ 4582 enum hw_lock_client { 4583 /** 4584 * Driver is the client of HW Lock Manager. 4585 */ 4586 HW_LOCK_CLIENT_DRIVER = 0, 4587 /** 4588 * PSR SU is the client of HW Lock Manager. 4589 */ 4590 HW_LOCK_CLIENT_PSR_SU = 1, 4591 HW_LOCK_CLIENT_SUBVP = 3, 4592 /** 4593 * Replay is the client of HW Lock Manager. 4594 */ 4595 HW_LOCK_CLIENT_REPLAY = 4, 4596 HW_LOCK_CLIENT_FAMS2 = 5, 4597 /** 4598 * Invalid client. 4599 */ 4600 HW_LOCK_CLIENT_INVALID = 0xFFFFFFFF, 4601 }; 4602 4603 /** 4604 * Data passed to HW Lock Mgr in a DMUB_CMD__HW_LOCK command. 4605 */ 4606 struct dmub_cmd_lock_hw_data { 4607 /** 4608 * Specifies the client accessing HW Lock Manager. 4609 */ 4610 enum hw_lock_client client; 4611 /** 4612 * HW instances to be locked. 4613 */ 4614 struct dmub_hw_lock_inst_flags inst_flags; 4615 /** 4616 * Which components to be locked. 4617 */ 4618 union dmub_hw_lock_flags hw_locks; 4619 /** 4620 * Specifies lock/unlock. 4621 */ 4622 uint8_t lock; 4623 /** 4624 * HW can be unlocked separately from releasing the HW Lock Mgr. 4625 * This flag is set if the client wishes to release the object. 4626 */ 4627 uint8_t should_release; 4628 /** 4629 * Explicit padding to 4 byte boundary. 4630 */ 4631 uint8_t pad; 4632 }; 4633 4634 /** 4635 * Definition of a DMUB_CMD__HW_LOCK command. 4636 * Command is used by driver and FW. 4637 */ 4638 struct dmub_rb_cmd_lock_hw { 4639 /** 4640 * Command header. 4641 */ 4642 struct dmub_cmd_header header; 4643 /** 4644 * Data passed to HW Lock Mgr in a DMUB_CMD__HW_LOCK command. 4645 */ 4646 struct dmub_cmd_lock_hw_data lock_hw_data; 4647 }; 4648 4649 /** 4650 * ABM command sub-types. 4651 */ 4652 enum dmub_cmd_abm_type { 4653 /** 4654 * Initialize parameters for ABM algorithm. 4655 * Data is passed through an indirect buffer. 4656 */ 4657 DMUB_CMD__ABM_INIT_CONFIG = 0, 4658 /** 4659 * Set OTG and panel HW instance. 4660 */ 4661 DMUB_CMD__ABM_SET_PIPE = 1, 4662 /** 4663 * Set user requested backklight level. 4664 */ 4665 DMUB_CMD__ABM_SET_BACKLIGHT = 2, 4666 /** 4667 * Set ABM operating/aggression level. 4668 */ 4669 DMUB_CMD__ABM_SET_LEVEL = 3, 4670 /** 4671 * Set ambient light level. 4672 */ 4673 DMUB_CMD__ABM_SET_AMBIENT_LEVEL = 4, 4674 /** 4675 * Enable/disable fractional duty cycle for backlight PWM. 4676 */ 4677 DMUB_CMD__ABM_SET_PWM_FRAC = 5, 4678 4679 /** 4680 * unregister vertical interrupt after steady state is reached 4681 */ 4682 DMUB_CMD__ABM_PAUSE = 6, 4683 4684 /** 4685 * Save and Restore ABM state. On save we save parameters, and 4686 * on restore we update state with passed in data. 4687 */ 4688 DMUB_CMD__ABM_SAVE_RESTORE = 7, 4689 4690 /** 4691 * Query ABM caps. 4692 */ 4693 DMUB_CMD__ABM_QUERY_CAPS = 8, 4694 4695 /** 4696 * Set ABM Events 4697 */ 4698 DMUB_CMD__ABM_SET_EVENT = 9, 4699 4700 /** 4701 * Get the current ACE curve. 4702 */ 4703 DMUB_CMD__ABM_GET_ACE_CURVE = 10, 4704 4705 /** 4706 * Get current histogram data 4707 */ 4708 DMUB_CMD__ABM_GET_HISTOGRAM_DATA = 11, 4709 }; 4710 4711 /** 4712 * LSDMA command sub-types. 4713 */ 4714 enum dmub_cmd_lsdma_type { 4715 /** 4716 * Initialize parameters for LSDMA. 4717 * Ring buffer is mapped to the ring buffer 4718 */ 4719 DMUB_CMD__LSDMA_INIT_CONFIG = 0, 4720 /** 4721 * LSDMA copies data from source to destination linearly 4722 */ 4723 DMUB_CMD__LSDMA_LINEAR_COPY = 1, 4724 /** 4725 * LSDMA copies data from source to destination linearly in sub window 4726 */ 4727 DMUB_CMD__LSDMA_LINEAR_SUB_WINDOW_COPY = 2, 4728 /** 4729 * Send the tiled-to-tiled copy command 4730 */ 4731 DMUB_CMD__LSDMA_TILED_TO_TILED_COPY = 3, 4732 /** 4733 * Send the poll reg write command 4734 */ 4735 DMUB_CMD__LSDMA_POLL_REG_WRITE = 4, 4736 /** 4737 * Send the pio copy command 4738 */ 4739 DMUB_CMD__LSDMA_PIO_COPY = 5, 4740 /** 4741 * Send the pio constfill command 4742 */ 4743 DMUB_CMD__LSDMA_PIO_CONSTFILL = 6, 4744 }; 4745 4746 struct abm_ace_curve { 4747 /** 4748 * @offsets: ACE curve offsets. 4749 */ 4750 uint32_t offsets[ABM_MAX_NUM_OF_ACE_SEGMENTS]; 4751 4752 /** 4753 * @thresholds: ACE curve thresholds. 4754 */ 4755 uint32_t thresholds[ABM_MAX_NUM_OF_ACE_SEGMENTS]; 4756 4757 /** 4758 * @slopes: ACE curve slopes. 4759 */ 4760 uint32_t slopes[ABM_MAX_NUM_OF_ACE_SEGMENTS]; 4761 }; 4762 4763 struct fixed_pt_format { 4764 /** 4765 * @sign_bit: Indicates whether one bit is reserved for the sign. 4766 */ 4767 bool sign_bit; 4768 4769 /** 4770 * @num_int_bits: Number of bits used for integer part. 4771 */ 4772 uint8_t num_int_bits; 4773 4774 /** 4775 * @num_frac_bits: Number of bits used for fractional part. 4776 */ 4777 uint8_t num_frac_bits; 4778 4779 /** 4780 * @pad: Explicit padding to 4 byte boundary. 4781 */ 4782 uint8_t pad; 4783 }; 4784 4785 struct abm_caps { 4786 /** 4787 * @num_hg_bins: Number of histogram bins. 4788 */ 4789 uint8_t num_hg_bins; 4790 4791 /** 4792 * @num_ace_segments: Number of ACE curve segments. 4793 */ 4794 uint8_t num_ace_segments; 4795 4796 /** 4797 * @pad: Explicit padding to 4 byte boundary. 4798 */ 4799 uint8_t pad[2]; 4800 4801 /** 4802 * @ace_thresholds_format: Format of the ACE thresholds. If not programmable, it is set to 0. 4803 */ 4804 struct fixed_pt_format ace_thresholds_format; 4805 4806 /** 4807 * @ace_offsets_format: Format of the ACE offsets. If not programmable, it is set to 0. 4808 */ 4809 struct fixed_pt_format ace_offsets_format; 4810 4811 /** 4812 * @ace_slopes_format: Format of the ACE slopes. 4813 */ 4814 struct fixed_pt_format ace_slopes_format; 4815 }; 4816 4817 /** 4818 * Parameters for ABM2.4 algorithm. Passed from driver to FW via an indirect buffer. 4819 * Requirements: 4820 * - Padded explicitly to 32-bit boundary. 4821 * - Must ensure this structure matches the one on driver-side, 4822 * otherwise it won't be aligned. 4823 */ 4824 struct abm_config_table { 4825 /** 4826 * Gamma curve thresholds, used for crgb conversion. 4827 */ 4828 uint16_t crgb_thresh[NUM_POWER_FN_SEGS]; // 0B 4829 /** 4830 * Gamma curve offsets, used for crgb conversion. 4831 */ 4832 uint16_t crgb_offset[NUM_POWER_FN_SEGS]; // 16B 4833 /** 4834 * Gamma curve slopes, used for crgb conversion. 4835 */ 4836 uint16_t crgb_slope[NUM_POWER_FN_SEGS]; // 32B 4837 /** 4838 * Custom backlight curve thresholds. 4839 */ 4840 uint16_t backlight_thresholds[NUM_BL_CURVE_SEGS]; // 48B 4841 /** 4842 * Custom backlight curve offsets. 4843 */ 4844 uint16_t backlight_offsets[NUM_BL_CURVE_SEGS]; // 78B 4845 /** 4846 * Ambient light thresholds. 4847 */ 4848 uint16_t ambient_thresholds_lux[NUM_AMBI_LEVEL]; // 112B 4849 /** 4850 * Minimum programmable backlight. 4851 */ 4852 uint16_t min_abm_backlight; // 122B 4853 /** 4854 * Minimum reduction values. 4855 */ 4856 uint8_t min_reduction[NUM_AMBI_LEVEL][NUM_AGGR_LEVEL]; // 124B 4857 /** 4858 * Maximum reduction values. 4859 */ 4860 uint8_t max_reduction[NUM_AMBI_LEVEL][NUM_AGGR_LEVEL]; // 144B 4861 /** 4862 * Bright positive gain. 4863 */ 4864 uint8_t bright_pos_gain[NUM_AMBI_LEVEL][NUM_AGGR_LEVEL]; // 164B 4865 /** 4866 * Dark negative gain. 4867 */ 4868 uint8_t dark_pos_gain[NUM_AMBI_LEVEL][NUM_AGGR_LEVEL]; // 184B 4869 /** 4870 * Hybrid factor. 4871 */ 4872 uint8_t hybrid_factor[NUM_AGGR_LEVEL]; // 204B 4873 /** 4874 * Contrast factor. 4875 */ 4876 uint8_t contrast_factor[NUM_AGGR_LEVEL]; // 208B 4877 /** 4878 * Deviation gain. 4879 */ 4880 uint8_t deviation_gain[NUM_AGGR_LEVEL]; // 212B 4881 /** 4882 * Minimum knee. 4883 */ 4884 uint8_t min_knee[NUM_AGGR_LEVEL]; // 216B 4885 /** 4886 * Maximum knee. 4887 */ 4888 uint8_t max_knee[NUM_AGGR_LEVEL]; // 220B 4889 /** 4890 * Unused. 4891 */ 4892 uint8_t iir_curve[NUM_AMBI_LEVEL]; // 224B 4893 /** 4894 * Explicit padding to 4 byte boundary. 4895 */ 4896 uint8_t pad3[3]; // 229B 4897 /** 4898 * Backlight ramp reduction. 4899 */ 4900 uint16_t blRampReduction[NUM_AGGR_LEVEL]; // 232B 4901 /** 4902 * Backlight ramp start. 4903 */ 4904 uint16_t blRampStart[NUM_AGGR_LEVEL]; // 240B 4905 }; 4906 4907 /** 4908 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_PIPE command. 4909 */ 4910 struct dmub_cmd_abm_set_pipe_data { 4911 /** 4912 * OTG HW instance. 4913 */ 4914 uint8_t otg_inst; 4915 4916 /** 4917 * Panel Control HW instance. 4918 */ 4919 uint8_t panel_inst; 4920 4921 /** 4922 * Controls how ABM will interpret a set pipe or set level command. 4923 */ 4924 uint8_t set_pipe_option; 4925 4926 /** 4927 * Unused. 4928 * TODO: Remove. 4929 */ 4930 uint8_t ramping_boundary; 4931 4932 /** 4933 * PwrSeq HW Instance. 4934 */ 4935 uint8_t pwrseq_inst; 4936 4937 /** 4938 * Explicit padding to 4 byte boundary. 4939 */ 4940 uint8_t pad[3]; 4941 }; 4942 4943 /** 4944 * Definition of a DMUB_CMD__ABM_SET_PIPE command. 4945 */ 4946 struct dmub_rb_cmd_abm_set_pipe { 4947 /** 4948 * Command header. 4949 */ 4950 struct dmub_cmd_header header; 4951 4952 /** 4953 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_PIPE command. 4954 */ 4955 struct dmub_cmd_abm_set_pipe_data abm_set_pipe_data; 4956 }; 4957 4958 /** 4959 * Type of backlight control method to be used by ABM module 4960 */ 4961 enum dmub_backlight_control_type { 4962 /** 4963 * PWM Backlight control 4964 */ 4965 DMU_BACKLIGHT_CONTROL_PWM = 0, 4966 /** 4967 * VESA Aux-based backlight control 4968 */ 4969 DMU_BACKLIGHT_CONTROL_VESA_AUX = 1, 4970 /** 4971 * AMD DPCD Aux-based backlight control 4972 */ 4973 DMU_BACKLIGHT_CONTROL_AMD_AUX = 2, 4974 }; 4975 4976 /** 4977 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_BACKLIGHT command. 4978 */ 4979 struct dmub_cmd_abm_set_backlight_data { 4980 /** 4981 * Number of frames to ramp to backlight user level. 4982 */ 4983 uint32_t frame_ramp; 4984 4985 /** 4986 * Requested backlight level from user. 4987 */ 4988 uint32_t backlight_user_level; 4989 4990 /** 4991 * ABM control version. 4992 */ 4993 uint8_t version; 4994 4995 /** 4996 * Panel Control HW instance mask. 4997 * Bit 0 is Panel Control HW instance 0. 4998 * Bit 1 is Panel Control HW instance 1. 4999 */ 5000 uint8_t panel_mask; 5001 5002 /** 5003 * AUX HW Instance. 5004 */ 5005 uint8_t aux_inst; 5006 5007 /** 5008 * Explicit padding to 4 byte boundary. 5009 */ 5010 uint8_t pad[1]; 5011 5012 /** 5013 * Backlight control type. 5014 * Value 0 is PWM backlight control. 5015 * Value 1 is VAUX backlight control. 5016 * Value 2 is AMD DPCD AUX backlight control. 5017 */ 5018 enum dmub_backlight_control_type backlight_control_type; 5019 5020 /** 5021 * Minimum luminance in nits. 5022 */ 5023 uint32_t min_luminance; 5024 5025 /** 5026 * Maximum luminance in nits. 5027 */ 5028 uint32_t max_luminance; 5029 5030 /** 5031 * Minimum backlight in pwm. 5032 */ 5033 uint32_t min_backlight_pwm; 5034 5035 /** 5036 * Maximum backlight in pwm. 5037 */ 5038 uint32_t max_backlight_pwm; 5039 }; 5040 5041 /** 5042 * Definition of a DMUB_CMD__ABM_SET_BACKLIGHT command. 5043 */ 5044 struct dmub_rb_cmd_abm_set_backlight { 5045 /** 5046 * Command header. 5047 */ 5048 struct dmub_cmd_header header; 5049 5050 /** 5051 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_BACKLIGHT command. 5052 */ 5053 struct dmub_cmd_abm_set_backlight_data abm_set_backlight_data; 5054 }; 5055 5056 /** 5057 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_LEVEL command. 5058 */ 5059 struct dmub_cmd_abm_set_level_data { 5060 /** 5061 * Set current ABM operating/aggression level. 5062 */ 5063 uint32_t level; 5064 5065 /** 5066 * ABM control version. 5067 */ 5068 uint8_t version; 5069 5070 /** 5071 * Panel Control HW instance mask. 5072 * Bit 0 is Panel Control HW instance 0. 5073 * Bit 1 is Panel Control HW instance 1. 5074 */ 5075 uint8_t panel_mask; 5076 5077 /** 5078 * Explicit padding to 4 byte boundary. 5079 */ 5080 uint8_t pad[2]; 5081 }; 5082 5083 /** 5084 * Definition of a DMUB_CMD__ABM_SET_LEVEL command. 5085 */ 5086 struct dmub_rb_cmd_abm_set_level { 5087 /** 5088 * Command header. 5089 */ 5090 struct dmub_cmd_header header; 5091 5092 /** 5093 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_LEVEL command. 5094 */ 5095 struct dmub_cmd_abm_set_level_data abm_set_level_data; 5096 }; 5097 5098 /** 5099 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_AMBIENT_LEVEL command. 5100 */ 5101 struct dmub_cmd_abm_set_ambient_level_data { 5102 /** 5103 * Ambient light sensor reading from OS. 5104 */ 5105 uint32_t ambient_lux; 5106 5107 /** 5108 * ABM control version. 5109 */ 5110 uint8_t version; 5111 5112 /** 5113 * Panel Control HW instance mask. 5114 * Bit 0 is Panel Control HW instance 0. 5115 * Bit 1 is Panel Control HW instance 1. 5116 */ 5117 uint8_t panel_mask; 5118 5119 /** 5120 * Explicit padding to 4 byte boundary. 5121 */ 5122 uint8_t pad[2]; 5123 }; 5124 5125 /** 5126 * Definition of a DMUB_CMD__ABM_SET_AMBIENT_LEVEL command. 5127 */ 5128 struct dmub_rb_cmd_abm_set_ambient_level { 5129 /** 5130 * Command header. 5131 */ 5132 struct dmub_cmd_header header; 5133 5134 /** 5135 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_AMBIENT_LEVEL command. 5136 */ 5137 struct dmub_cmd_abm_set_ambient_level_data abm_set_ambient_level_data; 5138 }; 5139 5140 /** 5141 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_PWM_FRAC command. 5142 */ 5143 struct dmub_cmd_abm_set_pwm_frac_data { 5144 /** 5145 * Enable/disable fractional duty cycle for backlight PWM. 5146 * TODO: Convert to uint8_t. 5147 */ 5148 uint32_t fractional_pwm; 5149 5150 /** 5151 * ABM control version. 5152 */ 5153 uint8_t version; 5154 5155 /** 5156 * Panel Control HW instance mask. 5157 * Bit 0 is Panel Control HW instance 0. 5158 * Bit 1 is Panel Control HW instance 1. 5159 */ 5160 uint8_t panel_mask; 5161 5162 /** 5163 * Explicit padding to 4 byte boundary. 5164 */ 5165 uint8_t pad[2]; 5166 }; 5167 5168 /** 5169 * Definition of a DMUB_CMD__ABM_SET_PWM_FRAC command. 5170 */ 5171 struct dmub_rb_cmd_abm_set_pwm_frac { 5172 /** 5173 * Command header. 5174 */ 5175 struct dmub_cmd_header header; 5176 5177 /** 5178 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_PWM_FRAC command. 5179 */ 5180 struct dmub_cmd_abm_set_pwm_frac_data abm_set_pwm_frac_data; 5181 }; 5182 5183 /** 5184 * Data passed from driver to FW in a DMUB_CMD__ABM_INIT_CONFIG command. 5185 */ 5186 struct dmub_cmd_abm_init_config_data { 5187 /** 5188 * Location of indirect buffer used to pass init data to ABM. 5189 */ 5190 union dmub_addr src; 5191 5192 /** 5193 * Indirect buffer length. 5194 */ 5195 uint16_t bytes; 5196 5197 5198 /** 5199 * ABM control version. 5200 */ 5201 uint8_t version; 5202 5203 /** 5204 * Panel Control HW instance mask. 5205 * Bit 0 is Panel Control HW instance 0. 5206 * Bit 1 is Panel Control HW instance 1. 5207 */ 5208 uint8_t panel_mask; 5209 5210 /** 5211 * Explicit padding to 4 byte boundary. 5212 */ 5213 uint8_t pad[2]; 5214 }; 5215 5216 /** 5217 * Definition of a DMUB_CMD__ABM_INIT_CONFIG command. 5218 */ 5219 struct dmub_rb_cmd_abm_init_config { 5220 /** 5221 * Command header. 5222 */ 5223 struct dmub_cmd_header header; 5224 5225 /** 5226 * Data passed from driver to FW in a DMUB_CMD__ABM_INIT_CONFIG command. 5227 */ 5228 struct dmub_cmd_abm_init_config_data abm_init_config_data; 5229 }; 5230 5231 /** 5232 * Data passed from driver to FW in a DMUB_CMD__ABM_PAUSE command. 5233 */ 5234 5235 struct dmub_cmd_abm_pause_data { 5236 5237 /** 5238 * Panel Control HW instance mask. 5239 * Bit 0 is Panel Control HW instance 0. 5240 * Bit 1 is Panel Control HW instance 1. 5241 */ 5242 uint8_t panel_mask; 5243 5244 /** 5245 * OTG hw instance 5246 */ 5247 uint8_t otg_inst; 5248 5249 /** 5250 * Enable or disable ABM pause 5251 */ 5252 uint8_t enable; 5253 5254 /** 5255 * Explicit padding to 4 byte boundary. 5256 */ 5257 uint8_t pad[1]; 5258 }; 5259 5260 /** 5261 * Definition of a DMUB_CMD__ABM_PAUSE command. 5262 */ 5263 struct dmub_rb_cmd_abm_pause { 5264 /** 5265 * Command header. 5266 */ 5267 struct dmub_cmd_header header; 5268 5269 /** 5270 * Data passed from driver to FW in a DMUB_CMD__ABM_PAUSE command. 5271 */ 5272 struct dmub_cmd_abm_pause_data abm_pause_data; 5273 }; 5274 5275 /** 5276 * Data passed from driver to FW in a DMUB_CMD__ABM_QUERY_CAPS command. 5277 */ 5278 struct dmub_cmd_abm_query_caps_in { 5279 /** 5280 * Panel instance. 5281 */ 5282 uint8_t panel_inst; 5283 5284 /** 5285 * Explicit padding to 4 byte boundary. 5286 */ 5287 uint8_t pad[3]; 5288 }; 5289 5290 /** 5291 * Data passed from FW to driver in a DMUB_CMD__ABM_QUERY_CAPS command. 5292 */ 5293 struct dmub_cmd_abm_query_caps_out { 5294 /** 5295 * SW Algorithm caps. 5296 */ 5297 struct abm_caps sw_caps; 5298 5299 /** 5300 * ABM HW caps. 5301 */ 5302 struct abm_caps hw_caps; 5303 }; 5304 5305 /** 5306 * Definition of a DMUB_CMD__ABM_QUERY_CAPS command. 5307 */ 5308 struct dmub_rb_cmd_abm_query_caps { 5309 /** 5310 * Command header. 5311 */ 5312 struct dmub_cmd_header header; 5313 5314 /** 5315 * Data passed between FW and driver in a DMUB_CMD__ABM_QUERY_CAPS command. 5316 */ 5317 union { 5318 struct dmub_cmd_abm_query_caps_in abm_query_caps_in; 5319 struct dmub_cmd_abm_query_caps_out abm_query_caps_out; 5320 } data; 5321 }; 5322 5323 /** 5324 * enum dmub_abm_ace_curve_type - ACE curve type. 5325 */ 5326 enum dmub_abm_ace_curve_type { 5327 /** 5328 * ACE curve as defined by the SW layer. 5329 */ 5330 ABM_ACE_CURVE_TYPE__SW = 0, 5331 /** 5332 * ACE curve as defined by the SW to HW translation interface layer. 5333 */ 5334 ABM_ACE_CURVE_TYPE__SW_IF = 1, 5335 }; 5336 5337 /** 5338 * enum dmub_abm_histogram_type - Histogram type. 5339 */ 5340 enum dmub_abm_histogram_type { 5341 /** 5342 * ACE curve as defined by the SW layer. 5343 */ 5344 ABM_HISTOGRAM_TYPE__SW = 0, 5345 /** 5346 * ACE curve as defined by the SW to HW translation interface layer. 5347 */ 5348 ABM_HISTOGRAM_TYPE__SW_IF = 1, 5349 }; 5350 5351 /** 5352 * Definition of a DMUB_CMD__ABM_GET_ACE_CURVE command. 5353 */ 5354 struct dmub_rb_cmd_abm_get_ace_curve { 5355 /** 5356 * Command header. 5357 */ 5358 struct dmub_cmd_header header; 5359 5360 /** 5361 * Address where ACE curve should be copied. 5362 */ 5363 union dmub_addr dest; 5364 5365 /** 5366 * Type of ACE curve being queried. 5367 */ 5368 enum dmub_abm_ace_curve_type ace_type; 5369 5370 /** 5371 * Indirect buffer length. 5372 */ 5373 uint16_t bytes; 5374 5375 /** 5376 * eDP panel instance. 5377 */ 5378 uint8_t panel_inst; 5379 5380 /** 5381 * Explicit padding to 4 byte boundary. 5382 */ 5383 uint8_t pad; 5384 }; 5385 5386 /** 5387 * Definition of a DMUB_CMD__ABM_GET_HISTOGRAM command. 5388 */ 5389 struct dmub_rb_cmd_abm_get_histogram { 5390 /** 5391 * Command header. 5392 */ 5393 struct dmub_cmd_header header; 5394 5395 /** 5396 * Address where Histogram should be copied. 5397 */ 5398 union dmub_addr dest; 5399 5400 /** 5401 * Type of Histogram being queried. 5402 */ 5403 enum dmub_abm_histogram_type histogram_type; 5404 5405 /** 5406 * Indirect buffer length. 5407 */ 5408 uint16_t bytes; 5409 5410 /** 5411 * eDP panel instance. 5412 */ 5413 uint8_t panel_inst; 5414 5415 /** 5416 * Explicit padding to 4 byte boundary. 5417 */ 5418 uint8_t pad; 5419 }; 5420 5421 /** 5422 * Definition of a DMUB_CMD__ABM_SAVE_RESTORE command. 5423 */ 5424 struct dmub_rb_cmd_abm_save_restore { 5425 /** 5426 * Command header. 5427 */ 5428 struct dmub_cmd_header header; 5429 5430 /** 5431 * OTG hw instance 5432 */ 5433 uint8_t otg_inst; 5434 5435 /** 5436 * Enable or disable ABM pause 5437 */ 5438 uint8_t freeze; 5439 5440 /** 5441 * Explicit padding to 4 byte boundary. 5442 */ 5443 uint8_t debug; 5444 5445 /** 5446 * Data passed from driver to FW in a DMUB_CMD__ABM_INIT_CONFIG command. 5447 */ 5448 struct dmub_cmd_abm_init_config_data abm_init_config_data; 5449 }; 5450 5451 /** 5452 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_EVENT command. 5453 */ 5454 5455 struct dmub_cmd_abm_set_event_data { 5456 5457 /** 5458 * VB Scaling Init. Strength Mapping 5459 * Byte 0: 0~255 for VB level 0 5460 * Byte 1: 0~255 for VB level 1 5461 * Byte 2: 0~255 for VB level 2 5462 * Byte 3: 0~255 for VB level 3 5463 */ 5464 uint32_t vb_scaling_strength_mapping; 5465 /** 5466 * VariBright Scaling Enable 5467 */ 5468 uint8_t vb_scaling_enable; 5469 /** 5470 * Panel Control HW instance mask. 5471 * Bit 0 is Panel Control HW instance 0. 5472 * Bit 1 is Panel Control HW instance 1. 5473 */ 5474 uint8_t panel_mask; 5475 5476 /** 5477 * Explicit padding to 4 byte boundary. 5478 */ 5479 uint8_t pad[2]; 5480 }; 5481 5482 /** 5483 * Definition of a DMUB_CMD__ABM_SET_EVENT command. 5484 */ 5485 struct dmub_rb_cmd_abm_set_event { 5486 /** 5487 * Command header. 5488 */ 5489 struct dmub_cmd_header header; 5490 5491 /** 5492 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_EVENT command. 5493 */ 5494 struct dmub_cmd_abm_set_event_data abm_set_event_data; 5495 }; 5496 5497 /** 5498 * Data passed from driver to FW in a DMUB_CMD__QUERY_FEATURE_CAPS command. 5499 */ 5500 struct dmub_cmd_query_feature_caps_data { 5501 /** 5502 * DMUB feature capabilities. 5503 * After DMUB init, driver will query FW capabilities prior to enabling certain features. 5504 */ 5505 struct dmub_feature_caps feature_caps; 5506 }; 5507 5508 /** 5509 * Definition of a DMUB_CMD__QUERY_FEATURE_CAPS command. 5510 */ 5511 struct dmub_rb_cmd_query_feature_caps { 5512 /** 5513 * Command header. 5514 */ 5515 struct dmub_cmd_header header; 5516 /** 5517 * Data passed from driver to FW in a DMUB_CMD__QUERY_FEATURE_CAPS command. 5518 */ 5519 struct dmub_cmd_query_feature_caps_data query_feature_caps_data; 5520 }; 5521 5522 /** 5523 * Data passed from driver to FW in a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. 5524 */ 5525 struct dmub_cmd_visual_confirm_color_data { 5526 /** 5527 * DMUB visual confirm color 5528 */ 5529 struct dmub_visual_confirm_color visual_confirm_color; 5530 }; 5531 5532 /** 5533 * Definition of a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. 5534 */ 5535 struct dmub_rb_cmd_get_visual_confirm_color { 5536 /** 5537 * Command header. 5538 */ 5539 struct dmub_cmd_header header; 5540 /** 5541 * Data passed from driver to FW in a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. 5542 */ 5543 struct dmub_cmd_visual_confirm_color_data visual_confirm_color_data; 5544 }; 5545 5546 /** 5547 * enum dmub_cmd_panel_cntl_type - Panel control command. 5548 */ 5549 enum dmub_cmd_panel_cntl_type { 5550 /** 5551 * Initializes embedded panel hardware blocks. 5552 */ 5553 DMUB_CMD__PANEL_CNTL_HW_INIT = 0, 5554 /** 5555 * Queries backlight info for the embedded panel. 5556 */ 5557 DMUB_CMD__PANEL_CNTL_QUERY_BACKLIGHT_INFO = 1, 5558 /** 5559 * Sets the PWM Freq as per user's requirement. 5560 */ 5561 DMUB_CMD__PANEL_DEBUG_PWM_FREQ = 2, 5562 }; 5563 5564 /** 5565 * struct dmub_cmd_panel_cntl_data - Panel control data. 5566 */ 5567 struct dmub_cmd_panel_cntl_data { 5568 uint32_t pwrseq_inst; /**< pwrseq instance */ 5569 uint32_t current_backlight; /* in/out */ 5570 uint32_t bl_pwm_cntl; /* in/out */ 5571 uint32_t bl_pwm_period_cntl; /* in/out */ 5572 uint32_t bl_pwm_ref_div1; /* in/out */ 5573 uint8_t is_backlight_on : 1; /* in/out */ 5574 uint8_t is_powered_on : 1; /* in/out */ 5575 uint8_t padding[3]; 5576 uint32_t bl_pwm_ref_div2; /* in/out */ 5577 uint8_t reserved[4]; 5578 }; 5579 5580 /** 5581 * struct dmub_rb_cmd_panel_cntl - Panel control command. 5582 */ 5583 struct dmub_rb_cmd_panel_cntl { 5584 struct dmub_cmd_header header; /**< header */ 5585 struct dmub_cmd_panel_cntl_data data; /**< payload */ 5586 }; 5587 5588 struct dmub_optc_state { 5589 uint32_t v_total_max; 5590 uint32_t v_total_min; 5591 uint32_t tg_inst; 5592 }; 5593 5594 struct dmub_rb_cmd_drr_update { 5595 struct dmub_cmd_header header; 5596 struct dmub_optc_state dmub_optc_state_req; 5597 }; 5598 5599 struct dmub_cmd_fw_assisted_mclk_switch_pipe_data { 5600 uint32_t pix_clk_100hz; 5601 uint8_t max_ramp_step; 5602 uint8_t pipes; 5603 uint8_t min_refresh_in_hz; 5604 uint8_t pipe_count; 5605 uint8_t pipe_index[4]; 5606 }; 5607 5608 struct dmub_cmd_fw_assisted_mclk_switch_config { 5609 uint8_t fams_enabled; 5610 uint8_t visual_confirm_enabled; 5611 uint16_t vactive_stretch_margin_us; // Extra vblank stretch required when doing FPO + Vactive 5612 struct dmub_cmd_fw_assisted_mclk_switch_pipe_data pipe_data[DMUB_MAX_FPO_STREAMS]; 5613 }; 5614 5615 struct dmub_rb_cmd_fw_assisted_mclk_switch { 5616 struct dmub_cmd_header header; 5617 struct dmub_cmd_fw_assisted_mclk_switch_config config_data; 5618 }; 5619 5620 /** 5621 * Data passed from driver to FW in a DMUB_CMD__VBIOS_LVTMA_CONTROL command. 5622 */ 5623 struct dmub_cmd_lvtma_control_data { 5624 uint8_t uc_pwr_action; /**< LVTMA_ACTION */ 5625 uint8_t bypass_panel_control_wait; 5626 uint8_t reserved_0[2]; /**< For future use */ 5627 uint8_t pwrseq_inst; /**< LVTMA control instance */ 5628 uint8_t reserved_1[3]; /**< For future use */ 5629 }; 5630 5631 /** 5632 * Definition of a DMUB_CMD__VBIOS_LVTMA_CONTROL command. 5633 */ 5634 struct dmub_rb_cmd_lvtma_control { 5635 /** 5636 * Command header. 5637 */ 5638 struct dmub_cmd_header header; 5639 /** 5640 * Data passed from driver to FW in a DMUB_CMD__VBIOS_LVTMA_CONTROL command. 5641 */ 5642 struct dmub_cmd_lvtma_control_data data; 5643 }; 5644 5645 /** 5646 * Data passed in/out in a DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT command. 5647 */ 5648 struct dmub_rb_cmd_transmitter_query_dp_alt_data { 5649 uint8_t phy_id; /**< 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4=UNIPHYE, 5=UNIPHYF */ 5650 uint8_t is_usb; /**< is phy is usb */ 5651 uint8_t is_dp_alt_disable; /**< is dp alt disable */ 5652 uint8_t is_dp4; /**< is dp in 4 lane */ 5653 }; 5654 5655 /** 5656 * Definition of a DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT command. 5657 */ 5658 struct dmub_rb_cmd_transmitter_query_dp_alt { 5659 struct dmub_cmd_header header; /**< header */ 5660 struct dmub_rb_cmd_transmitter_query_dp_alt_data data; /**< payload */ 5661 }; 5662 5663 struct phy_test_mode { 5664 uint8_t mode; 5665 uint8_t pat0; 5666 uint8_t pad[2]; 5667 }; 5668 5669 /** 5670 * Data passed in/out in a DMUB_CMD__VBIOS_TRANSMITTER_SET_PHY_FSM command. 5671 */ 5672 struct dmub_rb_cmd_transmitter_set_phy_fsm_data { 5673 uint8_t phy_id; /**< 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4=UNIPHYE, 5=UNIPHYF */ 5674 uint8_t mode; /**< HDMI/DP/DP2 etc */ 5675 uint8_t lane_num; /**< Number of lanes */ 5676 uint32_t symclk_100Hz; /**< PLL symclock in 100hz */ 5677 struct phy_test_mode test_mode; 5678 enum dmub_phy_fsm_state state; 5679 uint32_t status; 5680 uint8_t pad; 5681 }; 5682 5683 /** 5684 * Definition of a DMUB_CMD__VBIOS_TRANSMITTER_SET_PHY_FSM command. 5685 */ 5686 struct dmub_rb_cmd_transmitter_set_phy_fsm { 5687 struct dmub_cmd_header header; /**< header */ 5688 struct dmub_rb_cmd_transmitter_set_phy_fsm_data data; /**< payload */ 5689 }; 5690 5691 /** 5692 * Maximum number of bytes a chunk sent to DMUB for parsing 5693 */ 5694 #define DMUB_EDID_CEA_DATA_CHUNK_BYTES 8 5695 5696 /** 5697 * Represent a chunk of CEA blocks sent to DMUB for parsing 5698 */ 5699 struct dmub_cmd_send_edid_cea { 5700 uint16_t offset; /**< offset into the CEA block */ 5701 uint8_t length; /**< number of bytes in payload to copy as part of CEA block */ 5702 uint16_t cea_total_length; /**< total length of the CEA block */ 5703 uint8_t payload[DMUB_EDID_CEA_DATA_CHUNK_BYTES]; /**< data chunk of the CEA block */ 5704 uint8_t pad[3]; /**< padding and for future expansion */ 5705 }; 5706 5707 /** 5708 * Result of VSDB parsing from CEA block 5709 */ 5710 struct dmub_cmd_edid_cea_amd_vsdb { 5711 uint8_t vsdb_found; /**< 1 if parsing has found valid AMD VSDB */ 5712 uint8_t freesync_supported; /**< 1 if Freesync is supported */ 5713 uint16_t amd_vsdb_version; /**< AMD VSDB version */ 5714 uint16_t min_frame_rate; /**< Maximum frame rate */ 5715 uint16_t max_frame_rate; /**< Minimum frame rate */ 5716 }; 5717 5718 /** 5719 * Result of sending a CEA chunk 5720 */ 5721 struct dmub_cmd_edid_cea_ack { 5722 uint16_t offset; /**< offset of the chunk into the CEA block */ 5723 uint8_t success; /**< 1 if this sending of chunk succeeded */ 5724 uint8_t pad; /**< padding and for future expansion */ 5725 }; 5726 5727 /** 5728 * Specify whether the result is an ACK/NACK or the parsing has finished 5729 */ 5730 enum dmub_cmd_edid_cea_reply_type { 5731 DMUB_CMD__EDID_CEA_AMD_VSDB = 1, /**< VSDB parsing has finished */ 5732 DMUB_CMD__EDID_CEA_ACK = 2, /**< acknowledges the CEA sending is OK or failing */ 5733 }; 5734 5735 /** 5736 * Definition of a DMUB_CMD__EDID_CEA command. 5737 */ 5738 struct dmub_rb_cmd_edid_cea { 5739 struct dmub_cmd_header header; /**< Command header */ 5740 union dmub_cmd_edid_cea_data { 5741 struct dmub_cmd_send_edid_cea input; /**< input to send CEA chunks */ 5742 struct dmub_cmd_edid_cea_output { /**< output with results */ 5743 uint8_t type; /**< dmub_cmd_edid_cea_reply_type */ 5744 union { 5745 struct dmub_cmd_edid_cea_amd_vsdb amd_vsdb; 5746 struct dmub_cmd_edid_cea_ack ack; 5747 }; 5748 } output; /**< output to retrieve ACK/NACK or VSDB parsing results */ 5749 } data; /**< Command data */ 5750 5751 }; 5752 5753 /** 5754 * struct dmub_cmd_cable_id_input - Defines the input of DMUB_CMD_GET_USBC_CABLE_ID command. 5755 */ 5756 struct dmub_cmd_cable_id_input { 5757 uint8_t phy_inst; /**< phy inst for cable id data */ 5758 }; 5759 5760 /** 5761 * struct dmub_cmd_cable_id_input - Defines the output of DMUB_CMD_GET_USBC_CABLE_ID command. 5762 */ 5763 struct dmub_cmd_cable_id_output { 5764 uint8_t UHBR10_20_CAPABILITY :2; /**< b'01 for UHBR10 support, b'10 for both UHBR10 and UHBR20 support */ 5765 uint8_t UHBR13_5_CAPABILITY :1; /**< b'1 for UHBR13.5 support */ 5766 uint8_t CABLE_TYPE :3; /**< b'01 for passive cable, b'10 for active LRD cable, b'11 for active retimer cable */ 5767 uint8_t RESERVED :2; /**< reserved means not defined */ 5768 }; 5769 5770 /** 5771 * Definition of a DMUB_CMD_GET_USBC_CABLE_ID command 5772 */ 5773 struct dmub_rb_cmd_get_usbc_cable_id { 5774 struct dmub_cmd_header header; /**< Command header */ 5775 /** 5776 * Data passed from driver to FW in a DMUB_CMD_GET_USBC_CABLE_ID command. 5777 */ 5778 union dmub_cmd_cable_id_data { 5779 struct dmub_cmd_cable_id_input input; /**< Input */ 5780 struct dmub_cmd_cable_id_output output; /**< Output */ 5781 uint8_t output_raw; /**< Raw data output */ 5782 } data; 5783 }; 5784 5785 enum dmub_cmd_fused_io_sub_type { 5786 DMUB_CMD__FUSED_IO_EXECUTE = 0, 5787 DMUB_CMD__FUSED_IO_ABORT = 1, 5788 }; 5789 5790 enum dmub_cmd_fused_request_type { 5791 FUSED_REQUEST_READ, 5792 FUSED_REQUEST_WRITE, 5793 FUSED_REQUEST_POLL, 5794 }; 5795 5796 enum dmub_cmd_fused_request_status { 5797 FUSED_REQUEST_STATUS_SUCCESS, 5798 FUSED_REQUEST_STATUS_BEGIN, 5799 FUSED_REQUEST_STATUS_SUBMIT, 5800 FUSED_REQUEST_STATUS_REPLY, 5801 FUSED_REQUEST_STATUS_POLL, 5802 FUSED_REQUEST_STATUS_ABORTED, 5803 FUSED_REQUEST_STATUS_FAILED = 0x80, 5804 FUSED_REQUEST_STATUS_INVALID, 5805 FUSED_REQUEST_STATUS_BUSY, 5806 FUSED_REQUEST_STATUS_TIMEOUT, 5807 FUSED_REQUEST_STATUS_POLL_TIMEOUT, 5808 }; 5809 5810 struct dmub_cmd_fused_request { 5811 uint8_t status; 5812 uint8_t type : 2; 5813 uint8_t _reserved0 : 3; 5814 uint8_t poll_mask_msb : 3; // Number of MSB to zero out from last byte before comparing 5815 uint8_t identifier; 5816 uint8_t _reserved1; 5817 uint32_t timeout_us; 5818 union dmub_cmd_fused_request_location { 5819 struct dmub_cmd_fused_request_location_i2c { 5820 uint8_t is_aux : 1; // False 5821 uint8_t ddc_line : 3; 5822 uint8_t over_aux : 1; 5823 uint8_t _reserved0 : 3; 5824 uint8_t address; 5825 uint8_t offset; 5826 uint8_t length; 5827 } i2c; 5828 struct dmub_cmd_fused_request_location_aux { 5829 uint32_t is_aux : 1; // True 5830 uint32_t ddc_line : 3; 5831 uint32_t address : 20; 5832 uint32_t length : 8; // Automatically split into 16B transactions 5833 } aux; 5834 } u; 5835 uint8_t buffer[0x30]; // Read: out, write: in, poll: expected 5836 }; 5837 5838 struct dmub_rb_cmd_fused_io { 5839 struct dmub_cmd_header header; 5840 struct dmub_cmd_fused_request request; 5841 }; 5842 5843 /** 5844 * Command type of a DMUB_CMD__SECURE_DISPLAY command 5845 */ 5846 enum dmub_cmd_secure_display_type { 5847 DMUB_CMD__SECURE_DISPLAY_TEST_CMD = 0, /* test command to only check if inbox message works */ 5848 DMUB_CMD__SECURE_DISPLAY_CRC_STOP_UPDATE, 5849 DMUB_CMD__SECURE_DISPLAY_CRC_WIN_NOTIFY, 5850 DMUB_CMD__SECURE_DISPLAY_MULTIPLE_CRC_STOP_UPDATE, 5851 DMUB_CMD__SECURE_DISPLAY_MULTIPLE_CRC_WIN_NOTIFY 5852 }; 5853 5854 #define MAX_ROI_NUM 2 5855 5856 struct dmub_cmd_roi_info { 5857 uint16_t x_start; 5858 uint16_t x_end; 5859 uint16_t y_start; 5860 uint16_t y_end; 5861 uint8_t otg_id; 5862 uint8_t phy_id; 5863 }; 5864 5865 struct dmub_cmd_roi_window_ctl { 5866 uint16_t x_start; 5867 uint16_t x_end; 5868 uint16_t y_start; 5869 uint16_t y_end; 5870 bool enable; 5871 }; 5872 5873 struct dmub_cmd_roi_ctl_info { 5874 uint8_t otg_id; 5875 uint8_t phy_id; 5876 struct dmub_cmd_roi_window_ctl roi_ctl[MAX_ROI_NUM]; 5877 }; 5878 5879 /** 5880 * Definition of a DMUB_CMD__SECURE_DISPLAY command 5881 */ 5882 struct dmub_rb_cmd_secure_display { 5883 struct dmub_cmd_header header; 5884 /** 5885 * Data passed from driver to dmub firmware. 5886 */ 5887 struct dmub_cmd_roi_info roi_info; 5888 struct dmub_cmd_roi_ctl_info mul_roi_ctl; 5889 }; 5890 5891 /** 5892 * Command type of a DMUB_CMD__PSP command 5893 */ 5894 enum dmub_cmd_psp_type { 5895 DMUB_CMD__PSP_ASSR_ENABLE = 0 5896 }; 5897 5898 /** 5899 * Data passed from driver to FW in a DMUB_CMD__PSP_ASSR_ENABLE command. 5900 */ 5901 struct dmub_cmd_assr_enable_data { 5902 /** 5903 * ASSR enable or disable. 5904 */ 5905 uint8_t enable; 5906 /** 5907 * PHY port type. 5908 * Indicates eDP / non-eDP port type 5909 */ 5910 uint8_t phy_port_type; 5911 /** 5912 * PHY port ID. 5913 */ 5914 uint8_t phy_port_id; 5915 /** 5916 * Link encoder index. 5917 */ 5918 uint8_t link_enc_index; 5919 /** 5920 * HPO mode. 5921 */ 5922 uint8_t hpo_mode; 5923 5924 /** 5925 * Reserved field. 5926 */ 5927 uint8_t reserved[7]; 5928 }; 5929 5930 /** 5931 * Definition of a DMUB_CMD__PSP_ASSR_ENABLE command. 5932 */ 5933 struct dmub_rb_cmd_assr_enable { 5934 /** 5935 * Command header. 5936 */ 5937 struct dmub_cmd_header header; 5938 5939 /** 5940 * Assr data. 5941 */ 5942 struct dmub_cmd_assr_enable_data assr_data; 5943 5944 /** 5945 * Reserved field. 5946 */ 5947 uint32_t reserved[3]; 5948 }; 5949 5950 /** 5951 * Current definition of "ips_mode" from driver 5952 */ 5953 enum ips_residency_mode { 5954 IPS_RESIDENCY__IPS1_MAX, 5955 IPS_RESIDENCY__IPS2, 5956 IPS_RESIDENCY__IPS1_RCG, 5957 IPS_RESIDENCY__IPS1_ONO2_ON, 5958 IPS_RESIDENCY__IPS1_Z8_RETENTION, 5959 }; 5960 5961 #define NUM_IPS_HISTOGRAM_BUCKETS 16 5962 5963 /** 5964 * IPS residency statistics to be sent to driver - subset of struct dmub_ips_residency_stats 5965 */ 5966 struct dmub_ips_residency_info { 5967 uint32_t residency_millipercent; 5968 uint32_t entry_counter; 5969 uint32_t histogram[NUM_IPS_HISTOGRAM_BUCKETS]; 5970 uint64_t total_time_us; 5971 uint64_t total_inactive_time_us; 5972 }; 5973 5974 /** 5975 * Data passed from driver to FW in a DMUB_CMD__IPS_RESIDENCY_CNTL command. 5976 */ 5977 struct dmub_cmd_ips_residency_cntl_data { 5978 uint8_t panel_inst; 5979 uint8_t start_measurement; 5980 uint8_t padding[2]; // align to 4-byte boundary 5981 }; 5982 5983 struct dmub_rb_cmd_ips_residency_cntl { 5984 struct dmub_cmd_header header; 5985 struct dmub_cmd_ips_residency_cntl_data cntl_data; 5986 }; 5987 5988 /** 5989 * Data passed from FW to driver in a DMUB_CMD__IPS_QUERY_RESIDENCY_INFO command. 5990 */ 5991 struct dmub_cmd_ips_query_residency_info_data { 5992 union dmub_addr dest; 5993 uint32_t size; 5994 uint32_t ips_mode; 5995 uint8_t panel_inst; 5996 uint8_t padding[3]; // align to 4-byte boundary 5997 }; 5998 5999 struct dmub_rb_cmd_ips_query_residency_info { 6000 struct dmub_cmd_header header; 6001 struct dmub_cmd_ips_query_residency_info_data info_data; 6002 }; 6003 6004 /** 6005 * union dmub_rb_cmd - DMUB inbox command. 6006 */ 6007 union dmub_rb_cmd { 6008 /** 6009 * Elements shared with all commands. 6010 */ 6011 struct dmub_rb_cmd_common cmd_common; 6012 /** 6013 * Definition of a DMUB_CMD__REG_SEQ_READ_MODIFY_WRITE command. 6014 */ 6015 struct dmub_rb_cmd_read_modify_write read_modify_write; 6016 /** 6017 * Definition of a DMUB_CMD__REG_SEQ_FIELD_UPDATE_SEQ command. 6018 */ 6019 struct dmub_rb_cmd_reg_field_update_sequence reg_field_update_seq; 6020 /** 6021 * Definition of a DMUB_CMD__REG_SEQ_BURST_WRITE command. 6022 */ 6023 struct dmub_rb_cmd_burst_write burst_write; 6024 /** 6025 * Definition of a DMUB_CMD__REG_REG_WAIT command. 6026 */ 6027 struct dmub_rb_cmd_reg_wait reg_wait; 6028 /** 6029 * Definition of a DMUB_CMD__VBIOS_DIGX_ENCODER_CONTROL command. 6030 */ 6031 struct dmub_rb_cmd_digx_encoder_control digx_encoder_control; 6032 /** 6033 * Definition of a DMUB_CMD__VBIOS_SET_PIXEL_CLOCK command. 6034 */ 6035 struct dmub_rb_cmd_set_pixel_clock set_pixel_clock; 6036 /** 6037 * Definition of a DMUB_CMD__VBIOS_ENABLE_DISP_POWER_GATING command. 6038 */ 6039 struct dmub_rb_cmd_enable_disp_power_gating enable_disp_power_gating; 6040 /** 6041 * Definition of a DMUB_CMD__VBIOS_DPPHY_INIT command. 6042 */ 6043 struct dmub_rb_cmd_dpphy_init dpphy_init; 6044 /** 6045 * Definition of a DMUB_CMD__VBIOS_DIG1_TRANSMITTER_CONTROL command. 6046 */ 6047 struct dmub_rb_cmd_dig1_transmitter_control dig1_transmitter_control; 6048 /** 6049 * Definition of a DMUB_CMD__VBIOS_DOMAIN_CONTROL command. 6050 */ 6051 struct dmub_rb_cmd_domain_control domain_control; 6052 /** 6053 * Definition of a DMUB_CMD__PSR_SET_VERSION command. 6054 */ 6055 struct dmub_rb_cmd_psr_set_version psr_set_version; 6056 /** 6057 * Definition of a DMUB_CMD__PSR_COPY_SETTINGS command. 6058 */ 6059 struct dmub_rb_cmd_psr_copy_settings psr_copy_settings; 6060 /** 6061 * Definition of a DMUB_CMD__PSR_ENABLE command. 6062 */ 6063 struct dmub_rb_cmd_psr_enable psr_enable; 6064 /** 6065 * Definition of a DMUB_CMD__PSR_SET_LEVEL command. 6066 */ 6067 struct dmub_rb_cmd_psr_set_level psr_set_level; 6068 /** 6069 * Definition of a DMUB_CMD__PSR_FORCE_STATIC command. 6070 */ 6071 struct dmub_rb_cmd_psr_force_static psr_force_static; 6072 /** 6073 * Definition of a DMUB_CMD__UPDATE_DIRTY_RECT command. 6074 */ 6075 struct dmub_rb_cmd_update_dirty_rect update_dirty_rect; 6076 /** 6077 * Definition of a DMUB_CMD__UPDATE_CURSOR_INFO command. 6078 */ 6079 struct dmub_rb_cmd_update_cursor_info update_cursor_info; 6080 /** 6081 * Definition of a DMUB_CMD__HW_LOCK command. 6082 * Command is used by driver and FW. 6083 */ 6084 struct dmub_rb_cmd_lock_hw lock_hw; 6085 /** 6086 * Definition of a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. 6087 */ 6088 struct dmub_rb_cmd_psr_set_vtotal psr_set_vtotal; 6089 /** 6090 * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command. 6091 */ 6092 struct dmub_rb_cmd_psr_set_power_opt psr_set_power_opt; 6093 /** 6094 * Definition of a DMUB_CMD__PLAT_54186_WA command. 6095 */ 6096 struct dmub_rb_cmd_PLAT_54186_wa PLAT_54186_wa; 6097 /** 6098 * Definition of a DMUB_CMD__MALL command. 6099 */ 6100 struct dmub_rb_cmd_mall mall; 6101 6102 /** 6103 * Definition of a DMUB_CMD__CAB command. 6104 */ 6105 struct dmub_rb_cmd_cab_for_ss cab; 6106 6107 struct dmub_rb_cmd_fw_assisted_mclk_switch_v2 fw_assisted_mclk_switch_v2; 6108 6109 /** 6110 * Definition of a DMUB_CMD__IDLE_OPT_DCN_RESTORE command. 6111 */ 6112 struct dmub_rb_cmd_idle_opt_dcn_restore dcn_restore; 6113 6114 /** 6115 * Definition of a DMUB_CMD__CLK_MGR_NOTIFY_CLOCKS command. 6116 */ 6117 struct dmub_rb_cmd_clk_mgr_notify_clocks notify_clocks; 6118 6119 /** 6120 * Definition of DMUB_CMD__PANEL_CNTL commands. 6121 */ 6122 struct dmub_rb_cmd_panel_cntl panel_cntl; 6123 6124 /** 6125 * Definition of a DMUB_CMD__ABM_SET_PIPE command. 6126 */ 6127 struct dmub_rb_cmd_abm_set_pipe abm_set_pipe; 6128 6129 /** 6130 * Definition of a DMUB_CMD__ABM_SET_BACKLIGHT command. 6131 */ 6132 struct dmub_rb_cmd_abm_set_backlight abm_set_backlight; 6133 6134 /** 6135 * Definition of a DMUB_CMD__ABM_SET_LEVEL command. 6136 */ 6137 struct dmub_rb_cmd_abm_set_level abm_set_level; 6138 6139 /** 6140 * Definition of a DMUB_CMD__ABM_SET_AMBIENT_LEVEL command. 6141 */ 6142 struct dmub_rb_cmd_abm_set_ambient_level abm_set_ambient_level; 6143 6144 /** 6145 * Definition of a DMUB_CMD__ABM_SET_PWM_FRAC command. 6146 */ 6147 struct dmub_rb_cmd_abm_set_pwm_frac abm_set_pwm_frac; 6148 6149 /** 6150 * Definition of a DMUB_CMD__ABM_INIT_CONFIG command. 6151 */ 6152 struct dmub_rb_cmd_abm_init_config abm_init_config; 6153 6154 /** 6155 * Definition of a DMUB_CMD__ABM_PAUSE command. 6156 */ 6157 struct dmub_rb_cmd_abm_pause abm_pause; 6158 6159 /** 6160 * Definition of a DMUB_CMD__ABM_SAVE_RESTORE command. 6161 */ 6162 struct dmub_rb_cmd_abm_save_restore abm_save_restore; 6163 6164 /** 6165 * Definition of a DMUB_CMD__ABM_QUERY_CAPS command. 6166 */ 6167 struct dmub_rb_cmd_abm_query_caps abm_query_caps; 6168 6169 /** 6170 * Definition of a DMUB_CMD__ABM_GET_ACE_CURVE command. 6171 */ 6172 struct dmub_rb_cmd_abm_get_ace_curve abm_get_ace_curve; 6173 6174 /** 6175 * Definition of a DMUB_CMD__ABM_GET_HISTOGRAM command. 6176 */ 6177 struct dmub_rb_cmd_abm_get_histogram abm_get_histogram; 6178 6179 /** 6180 * Definition of a DMUB_CMD__ABM_SET_EVENT command. 6181 */ 6182 struct dmub_rb_cmd_abm_set_event abm_set_event; 6183 6184 /** 6185 * Definition of a DMUB_CMD__DP_AUX_ACCESS command. 6186 */ 6187 struct dmub_rb_cmd_dp_aux_access dp_aux_access; 6188 6189 /** 6190 * Definition of a DMUB_CMD__OUTBOX1_ENABLE command. 6191 */ 6192 struct dmub_rb_cmd_outbox1_enable outbox1_enable; 6193 6194 /** 6195 * Definition of a DMUB_CMD__QUERY_FEATURE_CAPS command. 6196 */ 6197 struct dmub_rb_cmd_query_feature_caps query_feature_caps; 6198 6199 /** 6200 * Definition of a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. 6201 */ 6202 struct dmub_rb_cmd_get_visual_confirm_color visual_confirm_color; 6203 struct dmub_rb_cmd_drr_update drr_update; 6204 struct dmub_rb_cmd_fw_assisted_mclk_switch fw_assisted_mclk_switch; 6205 6206 /** 6207 * Definition of a DMUB_CMD__VBIOS_LVTMA_CONTROL command. 6208 */ 6209 struct dmub_rb_cmd_lvtma_control lvtma_control; 6210 /** 6211 * Definition of a DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT command. 6212 */ 6213 struct dmub_rb_cmd_transmitter_query_dp_alt query_dp_alt; 6214 /** 6215 * Definition of a DMUB_CMD__VBIOS_TRANSMITTER_SET_PHY_FSM command. 6216 */ 6217 struct dmub_rb_cmd_transmitter_set_phy_fsm set_phy_fsm; 6218 /** 6219 * Definition of a DMUB_CMD__DPIA_DIG1_CONTROL command. 6220 */ 6221 struct dmub_rb_cmd_dig1_dpia_control dig1_dpia_control; 6222 /** 6223 * Definition of a DMUB_CMD__DPIA_SET_CONFIG_ACCESS command. 6224 */ 6225 struct dmub_rb_cmd_set_config_access set_config_access; // (deprecated) 6226 /** 6227 * Definition of a DMUB_CMD__DPIA_SET_CONFIG_ACCESS command. 6228 */ 6229 struct dmub_rb_cmd_set_config_request set_config_request; 6230 /** 6231 * Definition of a DMUB_CMD__DPIA_MST_ALLOC_SLOTS command. 6232 */ 6233 struct dmub_rb_cmd_set_mst_alloc_slots set_mst_alloc_slots; 6234 /** 6235 * Definition of a DMUB_CMD__DPIA_SET_TPS_NOTIFICATION command. 6236 */ 6237 struct dmub_rb_cmd_set_tps_notification set_tps_notification; 6238 /** 6239 * Definition of a DMUB_CMD__EDID_CEA command. 6240 */ 6241 struct dmub_rb_cmd_edid_cea edid_cea; 6242 /** 6243 * Definition of a DMUB_CMD_GET_USBC_CABLE_ID command. 6244 */ 6245 struct dmub_rb_cmd_get_usbc_cable_id cable_id; 6246 6247 /** 6248 * Definition of a DMUB_CMD__QUERY_HPD_STATE command. 6249 */ 6250 struct dmub_rb_cmd_query_hpd_state query_hpd; 6251 /** 6252 * Definition of a DMUB_CMD__SECURE_DISPLAY command. 6253 */ 6254 struct dmub_rb_cmd_secure_display secure_display; 6255 6256 /** 6257 * Definition of a DMUB_CMD__DPIA_HPD_INT_ENABLE command. 6258 */ 6259 struct dmub_rb_cmd_dpia_hpd_int_enable dpia_hpd_int_enable; 6260 /** 6261 * Definition of a DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE command. 6262 */ 6263 struct dmub_rb_cmd_idle_opt_dcn_notify_idle idle_opt_notify_idle; 6264 /** 6265 * Definition of a DMUB_CMD__IDLE_OPT_SET_DC_POWER_STATE command. 6266 */ 6267 struct dmub_rb_cmd_idle_opt_set_dc_power_state idle_opt_set_dc_power_state; 6268 /* 6269 * Definition of a DMUB_CMD__REPLAY_COPY_SETTINGS command. 6270 */ 6271 struct dmub_rb_cmd_replay_copy_settings replay_copy_settings; 6272 /** 6273 * Definition of a DMUB_CMD__REPLAY_ENABLE command. 6274 */ 6275 struct dmub_rb_cmd_replay_enable replay_enable; 6276 /** 6277 * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. 6278 */ 6279 struct dmub_rb_cmd_replay_set_power_opt replay_set_power_opt; 6280 /** 6281 * Definition of a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. 6282 */ 6283 struct dmub_rb_cmd_replay_set_coasting_vtotal replay_set_coasting_vtotal; 6284 /** 6285 * Definition of a DMUB_CMD__REPLAY_SET_POWER_OPT_AND_COASTING_VTOTAL command. 6286 */ 6287 struct dmub_rb_cmd_replay_set_power_opt_and_coasting_vtotal replay_set_power_opt_and_coasting_vtotal; 6288 6289 struct dmub_rb_cmd_replay_set_timing_sync replay_set_timing_sync; 6290 /** 6291 * Definition of a DMUB_CMD__REPLAY_SET_RESIDENCY_FRAMEUPDATE_TIMER command. 6292 */ 6293 struct dmub_rb_cmd_replay_set_frameupdate_timer replay_set_frameupdate_timer; 6294 /** 6295 * Definition of a DMUB_CMD__REPLAY_SET_PSEUDO_VTOTAL command. 6296 */ 6297 struct dmub_rb_cmd_replay_set_pseudo_vtotal replay_set_pseudo_vtotal; 6298 /** 6299 * Definition of a DMUB_CMD__REPLAY_DISABLED_ADAPTIVE_SYNC_SDP command. 6300 */ 6301 struct dmub_rb_cmd_replay_disabled_adaptive_sync_sdp replay_disabled_adaptive_sync_sdp; 6302 /** 6303 * Definition of a DMUB_CMD__REPLAY_SET_GENERAL_CMD command. 6304 */ 6305 struct dmub_rb_cmd_replay_set_general_cmd replay_set_general_cmd; 6306 /** 6307 * Definition of a DMUB_CMD__PSP_ASSR_ENABLE command. 6308 */ 6309 struct dmub_rb_cmd_assr_enable assr_enable; 6310 6311 struct dmub_rb_cmd_fams2 fams2_config; 6312 6313 struct dmub_rb_cmd_ib ib_fams2_config; 6314 6315 struct dmub_rb_cmd_fams2_drr_update fams2_drr_update; 6316 6317 struct dmub_rb_cmd_fams2_flip fams2_flip; 6318 6319 struct dmub_rb_cmd_fused_io fused_io; 6320 6321 /** 6322 * Definition of a DMUB_CMD__LSDMA command. 6323 */ 6324 struct dmub_rb_cmd_lsdma lsdma; 6325 6326 struct dmub_rb_cmd_ips_residency_cntl ips_residency_cntl; 6327 6328 struct dmub_rb_cmd_ips_query_residency_info ips_query_residency_info; 6329 }; 6330 6331 /** 6332 * union dmub_rb_out_cmd - Outbox command 6333 */ 6334 union dmub_rb_out_cmd { 6335 /** 6336 * Parameters common to every command. 6337 */ 6338 struct dmub_rb_cmd_common cmd_common; 6339 /** 6340 * AUX reply command. 6341 */ 6342 struct dmub_rb_cmd_dp_aux_reply dp_aux_reply; 6343 /** 6344 * HPD notify command. 6345 */ 6346 struct dmub_rb_cmd_dp_hpd_notify dp_hpd_notify; 6347 /** 6348 * SET_CONFIG reply command. 6349 */ 6350 struct dmub_rb_cmd_dp_set_config_reply set_config_reply; 6351 /** 6352 * DPIA notification command. 6353 */ 6354 struct dmub_rb_cmd_dpia_notification dpia_notification; 6355 /** 6356 * HPD sense notification command. 6357 */ 6358 struct dmub_rb_cmd_hpd_sense_notify hpd_sense_notify; 6359 struct dmub_rb_cmd_fused_io fused_io; 6360 }; 6361 #pragma pack(pop) 6362 6363 6364 //============================================================================== 6365 //</DMUB_CMD>=================================================================== 6366 //============================================================================== 6367 //< DMUB_RB>==================================================================== 6368 //============================================================================== 6369 6370 /** 6371 * struct dmub_rb_init_params - Initialization params for DMUB ringbuffer 6372 */ 6373 struct dmub_rb_init_params { 6374 void *ctx; /**< Caller provided context pointer */ 6375 void *base_address; /**< CPU base address for ring's data */ 6376 uint32_t capacity; /**< Ringbuffer capacity in bytes */ 6377 uint32_t read_ptr; /**< Initial read pointer for consumer in bytes */ 6378 uint32_t write_ptr; /**< Initial write pointer for producer in bytes */ 6379 }; 6380 6381 /** 6382 * struct dmub_rb - Inbox or outbox DMUB ringbuffer 6383 */ 6384 struct dmub_rb { 6385 void *base_address; /**< CPU address for the ring's data */ 6386 uint32_t rptr; /**< Read pointer for consumer in bytes */ 6387 uint32_t wrpt; /**< Write pointer for producer in bytes */ 6388 uint32_t capacity; /**< Ringbuffer capacity in bytes */ 6389 6390 void *ctx; /**< Caller provided context pointer */ 6391 void *dmub; /**< Pointer to the DMUB interface */ 6392 }; 6393 6394 /** 6395 * @brief Checks if the ringbuffer is empty. 6396 * 6397 * @param rb DMUB Ringbuffer 6398 * @return true if empty 6399 * @return false otherwise 6400 */ 6401 static inline bool dmub_rb_empty(struct dmub_rb *rb) 6402 { 6403 return (rb->wrpt == rb->rptr); 6404 } 6405 6406 /** 6407 * @brief gets number of outstanding requests in the RB 6408 * 6409 * @param rb DMUB Ringbuffer 6410 * @return true if full 6411 */ 6412 static inline uint32_t dmub_rb_num_outstanding(struct dmub_rb *rb) 6413 { 6414 uint32_t data_count; 6415 6416 if (rb->wrpt >= rb->rptr) 6417 data_count = rb->wrpt - rb->rptr; 6418 else 6419 data_count = rb->capacity - (rb->rptr - rb->wrpt); 6420 6421 return data_count / DMUB_RB_CMD_SIZE; 6422 } 6423 6424 /** 6425 * @brief gets number of free buffers in the RB 6426 * 6427 * @param rb DMUB Ringbuffer 6428 * @return true if full 6429 */ 6430 static inline uint32_t dmub_rb_num_free(struct dmub_rb *rb) 6431 { 6432 uint32_t data_count; 6433 6434 if (rb->wrpt >= rb->rptr) 6435 data_count = rb->wrpt - rb->rptr; 6436 else 6437 data_count = rb->capacity - (rb->rptr - rb->wrpt); 6438 6439 /* +1 because 1 entry is always unusable */ 6440 data_count += DMUB_RB_CMD_SIZE; 6441 6442 return (rb->capacity - data_count) / DMUB_RB_CMD_SIZE; 6443 } 6444 6445 /** 6446 * @brief Checks if the ringbuffer is full 6447 * 6448 * @param rb DMUB Ringbuffer 6449 * @return true if full 6450 * @return false otherwise 6451 */ 6452 static inline bool dmub_rb_full(struct dmub_rb *rb) 6453 { 6454 uint32_t data_count; 6455 6456 if (rb->wrpt >= rb->rptr) 6457 data_count = rb->wrpt - rb->rptr; 6458 else 6459 data_count = rb->capacity - (rb->rptr - rb->wrpt); 6460 6461 /* -1 because 1 entry is always unusable */ 6462 return (data_count == (rb->capacity - DMUB_RB_CMD_SIZE)); 6463 } 6464 6465 /** 6466 * @brief Pushes a command into the ringbuffer 6467 * 6468 * @param rb DMUB ringbuffer 6469 * @param cmd The command to push 6470 * @return true if the ringbuffer was not full 6471 * @return false otherwise 6472 */ 6473 static inline bool dmub_rb_push_front(struct dmub_rb *rb, 6474 const union dmub_rb_cmd *cmd) 6475 { 6476 uint64_t volatile *dst = (uint64_t volatile *)((uint8_t *)(rb->base_address) + rb->wrpt); 6477 const uint64_t *src = (const uint64_t *)cmd; 6478 uint8_t i; 6479 6480 if (dmub_rb_full(rb)) 6481 return false; 6482 6483 // copying data 6484 for (i = 0; i < DMUB_RB_CMD_SIZE / sizeof(uint64_t); i++) 6485 *dst++ = *src++; 6486 6487 rb->wrpt += DMUB_RB_CMD_SIZE; 6488 6489 if (rb->wrpt >= rb->capacity) 6490 rb->wrpt %= rb->capacity; 6491 6492 return true; 6493 } 6494 6495 /** 6496 * @brief Pushes a command into the DMUB outbox ringbuffer 6497 * 6498 * @param rb DMUB outbox ringbuffer 6499 * @param cmd Outbox command 6500 * @return true if not full 6501 * @return false otherwise 6502 */ 6503 static inline bool dmub_rb_out_push_front(struct dmub_rb *rb, 6504 const union dmub_rb_out_cmd *cmd) 6505 { 6506 uint8_t *dst = (uint8_t *)(rb->base_address) + rb->wrpt; 6507 const uint8_t *src = (const uint8_t *)cmd; 6508 6509 if (dmub_rb_full(rb)) 6510 return false; 6511 6512 dmub_memcpy(dst, src, DMUB_RB_CMD_SIZE); 6513 6514 rb->wrpt += DMUB_RB_CMD_SIZE; 6515 6516 if (rb->wrpt >= rb->capacity) 6517 rb->wrpt %= rb->capacity; 6518 6519 return true; 6520 } 6521 6522 /** 6523 * @brief Returns the next unprocessed command in the ringbuffer. 6524 * 6525 * @param rb DMUB ringbuffer 6526 * @param cmd The command to return 6527 * @return true if not empty 6528 * @return false otherwise 6529 */ 6530 static inline bool dmub_rb_front(struct dmub_rb *rb, 6531 union dmub_rb_cmd **cmd) 6532 { 6533 uint8_t *rb_cmd = (uint8_t *)(rb->base_address) + rb->rptr; 6534 6535 if (dmub_rb_empty(rb)) 6536 return false; 6537 6538 *cmd = (union dmub_rb_cmd *)rb_cmd; 6539 6540 return true; 6541 } 6542 6543 /** 6544 * @brief Determines the next ringbuffer offset. 6545 * 6546 * @param rb DMUB inbox ringbuffer 6547 * @param num_cmds Number of commands 6548 * @param next_rptr The next offset in the ringbuffer 6549 */ 6550 static inline void dmub_rb_get_rptr_with_offset(struct dmub_rb *rb, 6551 uint32_t num_cmds, 6552 uint32_t *next_rptr) 6553 { 6554 *next_rptr = rb->rptr + DMUB_RB_CMD_SIZE * num_cmds; 6555 6556 if (*next_rptr >= rb->capacity) 6557 *next_rptr %= rb->capacity; 6558 } 6559 6560 /** 6561 * @brief Returns a pointer to a command in the inbox. 6562 * 6563 * @param rb DMUB inbox ringbuffer 6564 * @param cmd The inbox command to return 6565 * @param rptr The ringbuffer offset 6566 * @return true if not empty 6567 * @return false otherwise 6568 */ 6569 static inline bool dmub_rb_peek_offset(struct dmub_rb *rb, 6570 union dmub_rb_cmd **cmd, 6571 uint32_t rptr) 6572 { 6573 uint8_t *rb_cmd = (uint8_t *)(rb->base_address) + rptr; 6574 6575 if (dmub_rb_empty(rb)) 6576 return false; 6577 6578 *cmd = (union dmub_rb_cmd *)rb_cmd; 6579 6580 return true; 6581 } 6582 6583 /** 6584 * @brief Returns the next unprocessed command in the outbox. 6585 * 6586 * @param rb DMUB outbox ringbuffer 6587 * @param cmd The outbox command to return 6588 * @return true if not empty 6589 * @return false otherwise 6590 */ 6591 static inline bool dmub_rb_out_front(struct dmub_rb *rb, 6592 union dmub_rb_out_cmd *cmd) 6593 { 6594 const uint64_t volatile *src = (const uint64_t volatile *)((uint8_t *)(rb->base_address) + rb->rptr); 6595 uint64_t *dst = (uint64_t *)cmd; 6596 uint8_t i; 6597 6598 if (dmub_rb_empty(rb)) 6599 return false; 6600 6601 // copying data 6602 for (i = 0; i < DMUB_RB_CMD_SIZE / sizeof(uint64_t); i++) 6603 *dst++ = *src++; 6604 6605 return true; 6606 } 6607 6608 /** 6609 * @brief Removes the front entry in the ringbuffer. 6610 * 6611 * @param rb DMUB ringbuffer 6612 * @return true if the command was removed 6613 * @return false if there were no commands 6614 */ 6615 static inline bool dmub_rb_pop_front(struct dmub_rb *rb) 6616 { 6617 if (dmub_rb_empty(rb)) 6618 return false; 6619 6620 rb->rptr += DMUB_RB_CMD_SIZE; 6621 6622 if (rb->rptr >= rb->capacity) 6623 rb->rptr %= rb->capacity; 6624 6625 return true; 6626 } 6627 6628 /** 6629 * @brief Flushes commands in the ringbuffer to framebuffer memory. 6630 * 6631 * Avoids a race condition where DMCUB accesses memory while 6632 * there are still writes in flight to framebuffer. 6633 * 6634 * @param rb DMUB ringbuffer 6635 */ 6636 static inline void dmub_rb_flush_pending(const struct dmub_rb *rb) 6637 { 6638 uint32_t rptr = rb->rptr; 6639 uint32_t wptr = rb->wrpt; 6640 6641 while (rptr != wptr) { 6642 uint64_t *data = (uint64_t *)((uint8_t *)(rb->base_address) + rptr); 6643 uint8_t i; 6644 6645 for (i = 0; i < DMUB_RB_CMD_SIZE / sizeof(uint64_t); i++) 6646 (void)READ_ONCE(*data++); 6647 6648 rptr += DMUB_RB_CMD_SIZE; 6649 if (rptr >= rb->capacity) 6650 rptr %= rb->capacity; 6651 } 6652 } 6653 6654 /** 6655 * @brief Initializes a DMCUB ringbuffer 6656 * 6657 * @param rb DMUB ringbuffer 6658 * @param init_params initial configuration for the ringbuffer 6659 */ 6660 static inline void dmub_rb_init(struct dmub_rb *rb, 6661 struct dmub_rb_init_params *init_params) 6662 { 6663 rb->base_address = init_params->base_address; 6664 rb->capacity = init_params->capacity; 6665 rb->rptr = init_params->read_ptr; 6666 rb->wrpt = init_params->write_ptr; 6667 } 6668 6669 /** 6670 * @brief Copies output data from in/out commands into the given command. 6671 * 6672 * @param rb DMUB ringbuffer 6673 * @param cmd Command to copy data into 6674 */ 6675 static inline void dmub_rb_get_return_data(struct dmub_rb *rb, 6676 union dmub_rb_cmd *cmd) 6677 { 6678 // Copy rb entry back into command 6679 uint8_t *rd_ptr = (rb->rptr == 0) ? 6680 (uint8_t *)rb->base_address + rb->capacity - DMUB_RB_CMD_SIZE : 6681 (uint8_t *)rb->base_address + rb->rptr - DMUB_RB_CMD_SIZE; 6682 6683 dmub_memcpy(cmd, rd_ptr, DMUB_RB_CMD_SIZE); 6684 } 6685 6686 //============================================================================== 6687 //</DMUB_RB>==================================================================== 6688 //============================================================================== 6689 #endif /* _DMUB_CMD_H_ */ 6690