xref: /linux/drivers/gpu/drm/Kconfig (revision 13209c2a52afa691ca19e7e6ebd22d4034bdfeed)
1#
2# Drm device configuration
3#
4# This driver provides support for the
5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
6#
7menuconfig DRM
8	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
10	select I2C
11	select I2C_ALGOBIT
12	select SLOW_WORK
13	help
14	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
15	  introduced in XFree86 4.0. If you say Y here, you need to select
16	  the module that's right for your graphics card from the list below.
17	  These modules provide support for synchronization, security, and
18	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
19	  details.  You should also select and configure AGP
20	  (/dev/agpgart) support if it is available for your platform.
21
22config DRM_KMS_HELPER
23	tristate
24	depends on DRM
25	select FB
26	select FRAMEBUFFER_CONSOLE if !EXPERT
27	help
28	  FB and CRTC helpers for KMS drivers.
29
30config DRM_TTM
31	tristate
32	depends on DRM
33	help
34	  GPU memory management subsystem for devices with multiple
35	  GPU memory types. Will be enabled automatically if a device driver
36	  uses it.
37
38config DRM_TDFX
39	tristate "3dfx Banshee/Voodoo3+"
40	depends on DRM && PCI
41	help
42	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
43	  graphics card.  If M is selected, the module will be called tdfx.
44
45config DRM_R128
46	tristate "ATI Rage 128"
47	depends on DRM && PCI
48	select FW_LOADER
49	help
50	  Choose this option if you have an ATI Rage 128 graphics card.  If M
51	  is selected, the module will be called r128.  AGP support for
52	  this card is strongly suggested (unless you have a PCI version).
53
54config DRM_RADEON
55	tristate "ATI Radeon"
56	depends on DRM && PCI
57	select FB_CFB_FILLRECT
58	select FB_CFB_COPYAREA
59	select FB_CFB_IMAGEBLIT
60	select FW_LOADER
61        select DRM_KMS_HELPER
62        select DRM_TTM
63	select POWER_SUPPLY
64	select HWMON
65	help
66	  Choose this option if you have an ATI Radeon graphics card.  There
67	  are both PCI and AGP versions.  You don't need to choose this to
68	  run the Radeon in plain VGA mode.
69
70	  If M is selected, the module will be called radeon.
71
72source "drivers/gpu/drm/radeon/Kconfig"
73
74config DRM_I810
75	tristate "Intel I810"
76	# !PREEMPT because of missing ioctl locking
77	depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
78	help
79	  Choose this option if you have an Intel I810 graphics card.  If M is
80	  selected, the module will be called i810.  AGP support is required
81	  for this driver to work.
82
83config DRM_I915
84	tristate "Intel 8xx/9xx/G3x/G4x/HD Graphics"
85	depends on DRM
86	depends on AGP
87	depends on AGP_INTEL
88	# we need shmfs for the swappable backing store, and in particular
89	# the shmem_readpage() which depends upon tmpfs
90	select SHMEM
91	select TMPFS
92	select DRM_KMS_HELPER
93	select FB_CFB_FILLRECT
94	select FB_CFB_COPYAREA
95	select FB_CFB_IMAGEBLIT
96	# i915 depends on ACPI_VIDEO when ACPI is enabled
97	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
98	select BACKLIGHT_CLASS_DEVICE if ACPI
99	select VIDEO_OUTPUT_CONTROL if ACPI
100	select INPUT if ACPI
101	select ACPI_VIDEO if ACPI
102	select ACPI_BUTTON if ACPI
103	help
104	  Choose this option if you have a system that has "Intel Graphics
105	  Media Accelerator" or "HD Graphics" integrated graphics,
106	  including 830M, 845G, 852GM, 855GM, 865G, 915G, 945G, 965G,
107	  G35, G41, G43, G45 chipsets and Celeron, Pentium, Core i3,
108	  Core i5, Core i7 as well as Atom CPUs with integrated graphics.
109	  If M is selected, the module will be called i915.  AGP support
110	  is required for this driver to work. This driver is used by
111	  the Intel driver in X.org 6.8 and XFree86 4.4 and above. It
112	  replaces the older i830 module that supported a subset of the
113	  hardware in older X.org releases.
114
115	  Note that the older i810/i815 chipsets require the use of the
116	  i810 driver instead, and the Atom z5xx series has an entirely
117	  different implementation.
118
119config DRM_I915_KMS
120	bool "Enable modesetting on intel by default"
121	depends on DRM_I915
122	help
123	  Choose this option if you want kernel modesetting enabled by default,
124	  and you have a new enough userspace to support this. Running old
125	  userspaces with this enabled will cause pain.  Note that this causes
126	  the driver to bind to PCI devices, which precludes loading things
127	  like intelfb.
128
129config DRM_MGA
130	tristate "Matrox g200/g400"
131	depends on DRM && PCI
132	select FW_LOADER
133	help
134	  Choose this option if you have a Matrox G200, G400 or G450 graphics
135	  card.  If M is selected, the module will be called mga.  AGP
136	  support is required for this driver to work.
137
138config DRM_SIS
139	tristate "SiS video cards"
140	depends on DRM && AGP
141	depends on FB_SIS || FB_SIS=n
142	help
143	  Choose this option if you have a SiS 630 or compatible video
144          chipset. If M is selected the module will be called sis. AGP
145          support is required for this driver to work.
146
147config DRM_VIA
148	tristate "Via unichrome video cards"
149	depends on DRM && PCI
150	help
151	  Choose this option if you have a Via unichrome or compatible video
152	  chipset. If M is selected the module will be called via.
153
154config DRM_SAVAGE
155	tristate "Savage video cards"
156	depends on DRM && PCI
157	help
158	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
159	  chipset. If M is selected the module will be called savage.
160