xref: /linux/drivers/gpio/gpio-xra1403.c (revision 69bfec7548f4c1595bac0e3ddfc0458a5af31f4c)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * GPIO driver for EXAR XRA1403 16-bit GPIO expander
4  *
5  * Copyright (c) 2017, General Electric Company
6  */
7 
8 #include <linux/bitops.h>
9 #include <linux/gpio/driver.h>
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/mutex.h>
13 #include <linux/of_device.h>
14 #include <linux/of_gpio.h>
15 #include <linux/seq_file.h>
16 #include <linux/spi/spi.h>
17 #include <linux/regmap.h>
18 
19 /* XRA1403 registers */
20 #define XRA_GSR   0x00 /* GPIO State */
21 #define XRA_OCR   0x02 /* Output Control */
22 #define XRA_PIR   0x04 /* Input Polarity Inversion */
23 #define XRA_GCR   0x06 /* GPIO Configuration */
24 #define XRA_PUR   0x08 /* Input Internal Pull-up Resistor Enable/Disable */
25 #define XRA_IER   0x0A /* Input Interrupt Enable */
26 #define XRA_TSCR  0x0C /* Output Three-State Control */
27 #define XRA_ISR   0x0E /* Input Interrupt Status */
28 #define XRA_REIR  0x10 /* Input Rising Edge Interrupt Enable */
29 #define XRA_FEIR  0x12 /* Input Falling Edge Interrupt Enable */
30 #define XRA_IFR   0x14 /* Input Filter Enable/Disable */
31 #define XRA_LAST  0x15 /* Bounds */
32 
33 struct xra1403 {
34 	struct gpio_chip  chip;
35 	struct regmap     *regmap;
36 };
37 
38 static const struct regmap_config xra1403_regmap_cfg = {
39 		.reg_bits = 7,
40 		.pad_bits = 1,
41 		.val_bits = 8,
42 
43 		.max_register = XRA_LAST,
44 };
45 
46 static unsigned int to_reg(unsigned int reg, unsigned int offset)
47 {
48 	return reg + (offset > 7);
49 }
50 
51 static int xra1403_direction_input(struct gpio_chip *chip, unsigned int offset)
52 {
53 	struct xra1403 *xra = gpiochip_get_data(chip);
54 
55 	return regmap_update_bits(xra->regmap, to_reg(XRA_GCR, offset),
56 			BIT(offset % 8), BIT(offset % 8));
57 }
58 
59 static int xra1403_direction_output(struct gpio_chip *chip, unsigned int offset,
60 				    int value)
61 {
62 	int ret;
63 	struct xra1403 *xra = gpiochip_get_data(chip);
64 
65 	ret = regmap_update_bits(xra->regmap, to_reg(XRA_GCR, offset),
66 			BIT(offset % 8), 0);
67 	if (ret)
68 		return ret;
69 
70 	ret = regmap_update_bits(xra->regmap, to_reg(XRA_OCR, offset),
71 			BIT(offset % 8), value ? BIT(offset % 8) : 0);
72 
73 	return ret;
74 }
75 
76 static int xra1403_get_direction(struct gpio_chip *chip, unsigned int offset)
77 {
78 	int ret;
79 	unsigned int val;
80 	struct xra1403 *xra = gpiochip_get_data(chip);
81 
82 	ret = regmap_read(xra->regmap, to_reg(XRA_GCR, offset), &val);
83 	if (ret)
84 		return ret;
85 
86 	if (val & BIT(offset % 8))
87 		return GPIO_LINE_DIRECTION_IN;
88 
89 	return GPIO_LINE_DIRECTION_OUT;
90 }
91 
92 static int xra1403_get(struct gpio_chip *chip, unsigned int offset)
93 {
94 	int ret;
95 	unsigned int val;
96 	struct xra1403 *xra = gpiochip_get_data(chip);
97 
98 	ret = regmap_read(xra->regmap, to_reg(XRA_GSR, offset), &val);
99 	if (ret)
100 		return ret;
101 
102 	return !!(val & BIT(offset % 8));
103 }
104 
105 static void xra1403_set(struct gpio_chip *chip, unsigned int offset, int value)
106 {
107 	int ret;
108 	struct xra1403 *xra = gpiochip_get_data(chip);
109 
110 	ret = regmap_update_bits(xra->regmap, to_reg(XRA_OCR, offset),
111 			BIT(offset % 8), value ? BIT(offset % 8) : 0);
112 	if (ret)
113 		dev_err(chip->parent, "Failed to set pin: %d, ret: %d\n",
114 				offset, ret);
115 }
116 
117 #ifdef CONFIG_DEBUG_FS
118 static void xra1403_dbg_show(struct seq_file *s, struct gpio_chip *chip)
119 {
120 	int reg;
121 	struct xra1403 *xra = gpiochip_get_data(chip);
122 	int value[XRA_LAST];
123 	int i;
124 	const char *label;
125 	unsigned int gcr;
126 	unsigned int gsr;
127 
128 	seq_puts(s, "xra reg:");
129 	for (reg = 0; reg <= XRA_LAST; reg++)
130 		seq_printf(s, " %2.2x", reg);
131 	seq_puts(s, "\n  value:");
132 	for (reg = 0; reg < XRA_LAST; reg++) {
133 		regmap_read(xra->regmap, reg, &value[reg]);
134 		seq_printf(s, " %2.2x", value[reg]);
135 	}
136 	seq_puts(s, "\n");
137 
138 	gcr = value[XRA_GCR + 1] << 8 | value[XRA_GCR];
139 	gsr = value[XRA_GSR + 1] << 8 | value[XRA_GSR];
140 	for_each_requested_gpio(chip, i, label) {
141 		seq_printf(s, " gpio-%-3d (%-12s) %s %s\n",
142 			   chip->base + i, label,
143 			   (gcr & BIT(i)) ? "in" : "out",
144 			   (gsr & BIT(i)) ? "hi" : "lo");
145 	}
146 }
147 #else
148 #define xra1403_dbg_show NULL
149 #endif
150 
151 static int xra1403_probe(struct spi_device *spi)
152 {
153 	struct xra1403 *xra;
154 	struct gpio_desc *reset_gpio;
155 	int ret;
156 
157 	xra = devm_kzalloc(&spi->dev, sizeof(*xra), GFP_KERNEL);
158 	if (!xra)
159 		return -ENOMEM;
160 
161 	/* bring the chip out of reset if reset pin is provided*/
162 	reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW);
163 	if (IS_ERR(reset_gpio))
164 		dev_warn(&spi->dev, "Could not get reset-gpios\n");
165 
166 	xra->chip.direction_input = xra1403_direction_input;
167 	xra->chip.direction_output = xra1403_direction_output;
168 	xra->chip.get_direction = xra1403_get_direction;
169 	xra->chip.get = xra1403_get;
170 	xra->chip.set = xra1403_set;
171 
172 	xra->chip.dbg_show = xra1403_dbg_show;
173 
174 	xra->chip.ngpio = 16;
175 	xra->chip.label = "xra1403";
176 
177 	xra->chip.base = -1;
178 	xra->chip.can_sleep = true;
179 	xra->chip.parent = &spi->dev;
180 	xra->chip.owner = THIS_MODULE;
181 
182 	xra->regmap = devm_regmap_init_spi(spi, &xra1403_regmap_cfg);
183 	if (IS_ERR(xra->regmap)) {
184 		ret = PTR_ERR(xra->regmap);
185 		dev_err(&spi->dev, "Failed to allocate regmap: %d\n", ret);
186 		return ret;
187 	}
188 
189 	return devm_gpiochip_add_data(&spi->dev, &xra->chip, xra);
190 }
191 
192 static const struct spi_device_id xra1403_ids[] = {
193 	{ "xra1403" },
194 	{},
195 };
196 MODULE_DEVICE_TABLE(spi, xra1403_ids);
197 
198 static const struct of_device_id xra1403_spi_of_match[] = {
199 	{ .compatible = "exar,xra1403" },
200 	{},
201 };
202 MODULE_DEVICE_TABLE(of, xra1403_spi_of_match);
203 
204 static struct spi_driver xra1403_driver = {
205 	.probe    = xra1403_probe,
206 	.id_table = xra1403_ids,
207 	.driver   = {
208 		.name           = "xra1403",
209 		.of_match_table = of_match_ptr(xra1403_spi_of_match),
210 	},
211 };
212 
213 module_spi_driver(xra1403_driver);
214 
215 MODULE_AUTHOR("Nandor Han <nandor.han@ge.com>");
216 MODULE_AUTHOR("Semi Malinen <semi.malinen@ge.com>");
217 MODULE_DESCRIPTION("GPIO expander driver for EXAR XRA1403");
218 MODULE_LICENSE("GPL v2");
219