xref: /linux/drivers/gpio/gpio-sch.c (revision 56d06fa29edd58c448766014afd833b7ff51247b)
1 /*
2  * GPIO interface for Intel Poulsbo SCH
3  *
4  *  Copyright (c) 2010 CompuLab Ltd
5  *  Author: Denis Turischev <denis@compulab.co.il>
6  *
7  *  This program is free software; you can redistribute it and/or modify
8  *  it under the terms of the GNU General Public License 2 as published
9  *  by the Free Software Foundation.
10  *
11  *  This program is distributed in the hope that it will be useful,
12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *  GNU General Public License for more details.
15  *
16  *  You should have received a copy of the GNU General Public License
17  *  along with this program; see the file COPYING.  If not, write to
18  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
19  */
20 
21 #include <linux/init.h>
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/io.h>
25 #include <linux/errno.h>
26 #include <linux/acpi.h>
27 #include <linux/platform_device.h>
28 #include <linux/pci_ids.h>
29 
30 #include <linux/gpio.h>
31 
32 #define GEN	0x00
33 #define GIO	0x04
34 #define GLV	0x08
35 
36 struct sch_gpio {
37 	struct gpio_chip chip;
38 	spinlock_t lock;
39 	unsigned short iobase;
40 	unsigned short core_base;
41 	unsigned short resume_base;
42 };
43 
44 static unsigned sch_gpio_offset(struct sch_gpio *sch, unsigned gpio,
45 				unsigned reg)
46 {
47 	unsigned base = 0;
48 
49 	if (gpio >= sch->resume_base) {
50 		gpio -= sch->resume_base;
51 		base += 0x20;
52 	}
53 
54 	return base + reg + gpio / 8;
55 }
56 
57 static unsigned sch_gpio_bit(struct sch_gpio *sch, unsigned gpio)
58 {
59 	if (gpio >= sch->resume_base)
60 		gpio -= sch->resume_base;
61 	return gpio % 8;
62 }
63 
64 static int sch_gpio_reg_get(struct gpio_chip *gc, unsigned gpio, unsigned reg)
65 {
66 	struct sch_gpio *sch = gpiochip_get_data(gc);
67 	unsigned short offset, bit;
68 	u8 reg_val;
69 
70 	offset = sch_gpio_offset(sch, gpio, reg);
71 	bit = sch_gpio_bit(sch, gpio);
72 
73 	reg_val = !!(inb(sch->iobase + offset) & BIT(bit));
74 
75 	return reg_val;
76 }
77 
78 static void sch_gpio_reg_set(struct gpio_chip *gc, unsigned gpio, unsigned reg,
79 			     int val)
80 {
81 	struct sch_gpio *sch = gpiochip_get_data(gc);
82 	unsigned short offset, bit;
83 	u8 reg_val;
84 
85 	offset = sch_gpio_offset(sch, gpio, reg);
86 	bit = sch_gpio_bit(sch, gpio);
87 
88 	reg_val = inb(sch->iobase + offset);
89 
90 	if (val)
91 		outb(reg_val | BIT(bit), sch->iobase + offset);
92 	else
93 		outb((reg_val & ~BIT(bit)), sch->iobase + offset);
94 }
95 
96 static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num)
97 {
98 	struct sch_gpio *sch = gpiochip_get_data(gc);
99 
100 	spin_lock(&sch->lock);
101 	sch_gpio_reg_set(gc, gpio_num, GIO, 1);
102 	spin_unlock(&sch->lock);
103 	return 0;
104 }
105 
106 static int sch_gpio_get(struct gpio_chip *gc, unsigned gpio_num)
107 {
108 	return sch_gpio_reg_get(gc, gpio_num, GLV);
109 }
110 
111 static void sch_gpio_set(struct gpio_chip *gc, unsigned gpio_num, int val)
112 {
113 	struct sch_gpio *sch = gpiochip_get_data(gc);
114 
115 	spin_lock(&sch->lock);
116 	sch_gpio_reg_set(gc, gpio_num, GLV, val);
117 	spin_unlock(&sch->lock);
118 }
119 
120 static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num,
121 				  int val)
122 {
123 	struct sch_gpio *sch = gpiochip_get_data(gc);
124 
125 	spin_lock(&sch->lock);
126 	sch_gpio_reg_set(gc, gpio_num, GIO, 0);
127 	spin_unlock(&sch->lock);
128 
129 	/*
130 	 * according to the datasheet, writing to the level register has no
131 	 * effect when GPIO is programmed as input.
132 	 * Actually the the level register is read-only when configured as input.
133 	 * Thus presetting the output level before switching to output is _NOT_ possible.
134 	 * Hence we set the level after configuring the GPIO as output.
135 	 * But we cannot prevent a short low pulse if direction is set to high
136 	 * and an external pull-up is connected.
137 	 */
138 	sch_gpio_set(gc, gpio_num, val);
139 	return 0;
140 }
141 
142 static struct gpio_chip sch_gpio_chip = {
143 	.label			= "sch_gpio",
144 	.owner			= THIS_MODULE,
145 	.direction_input	= sch_gpio_direction_in,
146 	.get			= sch_gpio_get,
147 	.direction_output	= sch_gpio_direction_out,
148 	.set			= sch_gpio_set,
149 };
150 
151 static int sch_gpio_probe(struct platform_device *pdev)
152 {
153 	struct sch_gpio *sch;
154 	struct resource *res;
155 
156 	sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL);
157 	if (!sch)
158 		return -ENOMEM;
159 
160 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
161 	if (!res)
162 		return -EBUSY;
163 
164 	if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
165 				 pdev->name))
166 		return -EBUSY;
167 
168 	spin_lock_init(&sch->lock);
169 	sch->iobase = res->start;
170 	sch->chip = sch_gpio_chip;
171 	sch->chip.label = dev_name(&pdev->dev);
172 	sch->chip.parent = &pdev->dev;
173 
174 	switch (pdev->id) {
175 	case PCI_DEVICE_ID_INTEL_SCH_LPC:
176 		sch->core_base = 0;
177 		sch->resume_base = 10;
178 		sch->chip.ngpio = 14;
179 
180 		/*
181 		 * GPIO[6:0] enabled by default
182 		 * GPIO7 is configured by the CMC as SLPIOVR
183 		 * Enable GPIO[9:8] core powered gpios explicitly
184 		 */
185 		sch_gpio_reg_set(&sch->chip, 8, GEN, 1);
186 		sch_gpio_reg_set(&sch->chip, 9, GEN, 1);
187 		/*
188 		 * SUS_GPIO[2:0] enabled by default
189 		 * Enable SUS_GPIO3 resume powered gpio explicitly
190 		 */
191 		sch_gpio_reg_set(&sch->chip, 13, GEN, 1);
192 		break;
193 
194 	case PCI_DEVICE_ID_INTEL_ITC_LPC:
195 		sch->core_base = 0;
196 		sch->resume_base = 5;
197 		sch->chip.ngpio = 14;
198 		break;
199 
200 	case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
201 		sch->core_base = 0;
202 		sch->resume_base = 21;
203 		sch->chip.ngpio = 30;
204 		break;
205 
206 	case PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB:
207 		sch->core_base = 0;
208 		sch->resume_base = 2;
209 		sch->chip.ngpio = 8;
210 		break;
211 
212 	default:
213 		return -ENODEV;
214 	}
215 
216 	platform_set_drvdata(pdev, sch);
217 
218 	return devm_gpiochip_add_data(&pdev->dev, &sch->chip, sch);
219 }
220 
221 static struct platform_driver sch_gpio_driver = {
222 	.driver = {
223 		.name = "sch_gpio",
224 	},
225 	.probe		= sch_gpio_probe,
226 };
227 
228 module_platform_driver(sch_gpio_driver);
229 
230 MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
231 MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
232 MODULE_LICENSE("GPL");
233 MODULE_ALIAS("platform:sch_gpio");
234