xref: /linux/drivers/gpio/gpio-sch.c (revision 4949009eb8d40a441dcddcd96e101e77d31cf1b2)
1 /*
2  * GPIO interface for Intel Poulsbo SCH
3  *
4  *  Copyright (c) 2010 CompuLab Ltd
5  *  Author: Denis Turischev <denis@compulab.co.il>
6  *
7  *  This program is free software; you can redistribute it and/or modify
8  *  it under the terms of the GNU General Public License 2 as published
9  *  by the Free Software Foundation.
10  *
11  *  This program is distributed in the hope that it will be useful,
12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *  GNU General Public License for more details.
15  *
16  *  You should have received a copy of the GNU General Public License
17  *  along with this program; see the file COPYING.  If not, write to
18  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
19  */
20 
21 #include <linux/init.h>
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/io.h>
25 #include <linux/errno.h>
26 #include <linux/acpi.h>
27 #include <linux/platform_device.h>
28 #include <linux/pci_ids.h>
29 
30 #include <linux/gpio.h>
31 
32 #define GEN	0x00
33 #define GIO	0x04
34 #define GLV	0x08
35 
36 struct sch_gpio {
37 	struct gpio_chip chip;
38 	spinlock_t lock;
39 	unsigned short iobase;
40 	unsigned short core_base;
41 	unsigned short resume_base;
42 };
43 
44 #define to_sch_gpio(c)	container_of(c, struct sch_gpio, chip)
45 
46 static unsigned sch_gpio_offset(struct sch_gpio *sch, unsigned gpio,
47 				unsigned reg)
48 {
49 	unsigned base = 0;
50 
51 	if (gpio >= sch->resume_base) {
52 		gpio -= sch->resume_base;
53 		base += 0x20;
54 	}
55 
56 	return base + reg + gpio / 8;
57 }
58 
59 static unsigned sch_gpio_bit(struct sch_gpio *sch, unsigned gpio)
60 {
61 	if (gpio >= sch->resume_base)
62 		gpio -= sch->resume_base;
63 	return gpio % 8;
64 }
65 
66 static void sch_gpio_enable(struct sch_gpio *sch, unsigned gpio)
67 {
68 	unsigned short offset, bit;
69 	u8 enable;
70 
71 	spin_lock(&sch->lock);
72 
73 	offset = sch_gpio_offset(sch, gpio, GEN);
74 	bit = sch_gpio_bit(sch, gpio);
75 
76 	enable = inb(sch->iobase + offset);
77 	if (!(enable & (1 << bit)))
78 		outb(enable | (1 << bit), sch->iobase + offset);
79 
80 	spin_unlock(&sch->lock);
81 }
82 
83 static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned  gpio_num)
84 {
85 	struct sch_gpio *sch = to_sch_gpio(gc);
86 	u8 curr_dirs;
87 	unsigned short offset, bit;
88 
89 	spin_lock(&sch->lock);
90 
91 	offset = sch_gpio_offset(sch, gpio_num, GIO);
92 	bit = sch_gpio_bit(sch, gpio_num);
93 
94 	curr_dirs = inb(sch->iobase + offset);
95 
96 	if (!(curr_dirs & (1 << bit)))
97 		outb(curr_dirs | (1 << bit), sch->iobase + offset);
98 
99 	spin_unlock(&sch->lock);
100 	return 0;
101 }
102 
103 static int sch_gpio_get(struct gpio_chip *gc, unsigned gpio_num)
104 {
105 	struct sch_gpio *sch = to_sch_gpio(gc);
106 	int res;
107 	unsigned short offset, bit;
108 
109 	offset = sch_gpio_offset(sch, gpio_num, GLV);
110 	bit = sch_gpio_bit(sch, gpio_num);
111 
112 	res = !!(inb(sch->iobase + offset) & (1 << bit));
113 
114 	return res;
115 }
116 
117 static void sch_gpio_set(struct gpio_chip *gc, unsigned gpio_num, int val)
118 {
119 	struct sch_gpio *sch = to_sch_gpio(gc);
120 	u8 curr_vals;
121 	unsigned short offset, bit;
122 
123 	spin_lock(&sch->lock);
124 
125 	offset = sch_gpio_offset(sch, gpio_num, GLV);
126 	bit = sch_gpio_bit(sch, gpio_num);
127 
128 	curr_vals = inb(sch->iobase + offset);
129 
130 	if (val)
131 		outb(curr_vals | (1 << bit), sch->iobase + offset);
132 	else
133 		outb((curr_vals & ~(1 << bit)), sch->iobase + offset);
134 
135 	spin_unlock(&sch->lock);
136 }
137 
138 static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num,
139 				  int val)
140 {
141 	struct sch_gpio *sch = to_sch_gpio(gc);
142 	u8 curr_dirs;
143 	unsigned short offset, bit;
144 
145 	spin_lock(&sch->lock);
146 
147 	offset = sch_gpio_offset(sch, gpio_num, GIO);
148 	bit = sch_gpio_bit(sch, gpio_num);
149 
150 	curr_dirs = inb(sch->iobase + offset);
151 	if (curr_dirs & (1 << bit))
152 		outb(curr_dirs & ~(1 << bit), sch->iobase + offset);
153 
154 	spin_unlock(&sch->lock);
155 
156 	/*
157 	 * according to the datasheet, writing to the level register has no
158 	 * effect when GPIO is programmed as input.
159 	 * Actually the the level register is read-only when configured as input.
160 	 * Thus presetting the output level before switching to output is _NOT_ possible.
161 	 * Hence we set the level after configuring the GPIO as output.
162 	 * But we cannot prevent a short low pulse if direction is set to high
163 	 * and an external pull-up is connected.
164 	 */
165 	sch_gpio_set(gc, gpio_num, val);
166 	return 0;
167 }
168 
169 static struct gpio_chip sch_gpio_chip = {
170 	.label			= "sch_gpio",
171 	.owner			= THIS_MODULE,
172 	.direction_input	= sch_gpio_direction_in,
173 	.get			= sch_gpio_get,
174 	.direction_output	= sch_gpio_direction_out,
175 	.set			= sch_gpio_set,
176 };
177 
178 static int sch_gpio_probe(struct platform_device *pdev)
179 {
180 	struct sch_gpio *sch;
181 	struct resource *res;
182 
183 	sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL);
184 	if (!sch)
185 		return -ENOMEM;
186 
187 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
188 	if (!res)
189 		return -EBUSY;
190 
191 	if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
192 				 pdev->name))
193 		return -EBUSY;
194 
195 	spin_lock_init(&sch->lock);
196 	sch->iobase = res->start;
197 	sch->chip = sch_gpio_chip;
198 	sch->chip.label = dev_name(&pdev->dev);
199 	sch->chip.dev = &pdev->dev;
200 
201 	switch (pdev->id) {
202 	case PCI_DEVICE_ID_INTEL_SCH_LPC:
203 		sch->core_base = 0;
204 		sch->resume_base = 10;
205 		sch->chip.ngpio = 14;
206 
207 		/*
208 		 * GPIO[6:0] enabled by default
209 		 * GPIO7 is configured by the CMC as SLPIOVR
210 		 * Enable GPIO[9:8] core powered gpios explicitly
211 		 */
212 		sch_gpio_enable(sch, 8);
213 		sch_gpio_enable(sch, 9);
214 		/*
215 		 * SUS_GPIO[2:0] enabled by default
216 		 * Enable SUS_GPIO3 resume powered gpio explicitly
217 		 */
218 		sch_gpio_enable(sch, 13);
219 		break;
220 
221 	case PCI_DEVICE_ID_INTEL_ITC_LPC:
222 		sch->core_base = 0;
223 		sch->resume_base = 5;
224 		sch->chip.ngpio = 14;
225 		break;
226 
227 	case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
228 		sch->core_base = 0;
229 		sch->resume_base = 21;
230 		sch->chip.ngpio = 30;
231 		break;
232 
233 	default:
234 		return -ENODEV;
235 	}
236 
237 	platform_set_drvdata(pdev, sch);
238 
239 	return gpiochip_add(&sch->chip);
240 }
241 
242 static int sch_gpio_remove(struct platform_device *pdev)
243 {
244 	struct sch_gpio *sch = platform_get_drvdata(pdev);
245 
246 	gpiochip_remove(&sch->chip);
247 	return 0;
248 }
249 
250 static struct platform_driver sch_gpio_driver = {
251 	.driver = {
252 		.name = "sch_gpio",
253 	},
254 	.probe		= sch_gpio_probe,
255 	.remove		= sch_gpio_remove,
256 };
257 
258 module_platform_driver(sch_gpio_driver);
259 
260 MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
261 MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
262 MODULE_LICENSE("GPL");
263 MODULE_ALIAS("platform:sch_gpio");
264