xref: /linux/drivers/gpio/gpio-omap.c (revision c6bd5bcc4983f1a2d2f87a3769bf309482ee8c04) 
1 /*
2  * Support functions for OMAP GPIO
3  *
4  * Copyright (C) 2003-2005 Nokia Corporation
5  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
6  *
7  * Copyright (C) 2009 Texas Instruments
8  * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
14 
15 #include <linux/init.h>
16 #include <linux/module.h>
17 #include <linux/interrupt.h>
18 #include <linux/syscore_ops.h>
19 #include <linux/err.h>
20 #include <linux/clk.h>
21 #include <linux/io.h>
22 #include <linux/device.h>
23 #include <linux/pm_runtime.h>
24 #include <linux/pm.h>
25 #include <linux/of.h>
26 #include <linux/of_device.h>
27 #include <linux/irqdomain.h>
28 #include <linux/gpio.h>
29 #include <linux/platform_data/gpio-omap.h>
30 
31 #include <asm/mach/irq.h>
32 
33 #define OFF_MODE	1
34 
35 static LIST_HEAD(omap_gpio_list);
36 
37 struct gpio_regs {
38 	u32 irqenable1;
39 	u32 irqenable2;
40 	u32 wake_en;
41 	u32 ctrl;
42 	u32 oe;
43 	u32 leveldetect0;
44 	u32 leveldetect1;
45 	u32 risingdetect;
46 	u32 fallingdetect;
47 	u32 dataout;
48 	u32 debounce;
49 	u32 debounce_en;
50 };
51 
52 struct gpio_bank {
53 	struct list_head node;
54 	void __iomem *base;
55 	u16 irq;
56 	int irq_base;
57 	struct irq_domain *domain;
58 	u32 non_wakeup_gpios;
59 	u32 enabled_non_wakeup_gpios;
60 	struct gpio_regs context;
61 	u32 saved_datain;
62 	u32 level_mask;
63 	u32 toggle_mask;
64 	spinlock_t lock;
65 	struct gpio_chip chip;
66 	struct clk *dbck;
67 	u32 mod_usage;
68 	u32 dbck_enable_mask;
69 	bool dbck_enabled;
70 	struct device *dev;
71 	bool is_mpuio;
72 	bool dbck_flag;
73 	bool loses_context;
74 	int stride;
75 	u32 width;
76 	int context_loss_count;
77 	int power_mode;
78 	bool workaround_enabled;
79 
80 	void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable);
81 	int (*get_context_loss_count)(struct device *dev);
82 
83 	struct omap_gpio_reg_offs *regs;
84 };
85 
86 #define GPIO_INDEX(bank, gpio) (gpio % bank->width)
87 #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
88 #define GPIO_MOD_CTRL_BIT	BIT(0)
89 
90 static int irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq)
91 {
92 	return gpio_irq - bank->irq_base + bank->chip.base;
93 }
94 
95 static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
96 {
97 	void __iomem *reg = bank->base;
98 	u32 l;
99 
100 	reg += bank->regs->direction;
101 	l = __raw_readl(reg);
102 	if (is_input)
103 		l |= 1 << gpio;
104 	else
105 		l &= ~(1 << gpio);
106 	__raw_writel(l, reg);
107 	bank->context.oe = l;
108 }
109 
110 
111 /* set data out value using dedicate set/clear register */
112 static void _set_gpio_dataout_reg(struct gpio_bank *bank, int gpio, int enable)
113 {
114 	void __iomem *reg = bank->base;
115 	u32 l = GPIO_BIT(bank, gpio);
116 
117 	if (enable) {
118 		reg += bank->regs->set_dataout;
119 		bank->context.dataout |= l;
120 	} else {
121 		reg += bank->regs->clr_dataout;
122 		bank->context.dataout &= ~l;
123 	}
124 
125 	__raw_writel(l, reg);
126 }
127 
128 /* set data out value using mask register */
129 static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable)
130 {
131 	void __iomem *reg = bank->base + bank->regs->dataout;
132 	u32 gpio_bit = GPIO_BIT(bank, gpio);
133 	u32 l;
134 
135 	l = __raw_readl(reg);
136 	if (enable)
137 		l |= gpio_bit;
138 	else
139 		l &= ~gpio_bit;
140 	__raw_writel(l, reg);
141 	bank->context.dataout = l;
142 }
143 
144 static int _get_gpio_datain(struct gpio_bank *bank, int offset)
145 {
146 	void __iomem *reg = bank->base + bank->regs->datain;
147 
148 	return (__raw_readl(reg) & (1 << offset)) != 0;
149 }
150 
151 static int _get_gpio_dataout(struct gpio_bank *bank, int offset)
152 {
153 	void __iomem *reg = bank->base + bank->regs->dataout;
154 
155 	return (__raw_readl(reg) & (1 << offset)) != 0;
156 }
157 
158 static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
159 {
160 	int l = __raw_readl(base + reg);
161 
162 	if (set)
163 		l |= mask;
164 	else
165 		l &= ~mask;
166 
167 	__raw_writel(l, base + reg);
168 }
169 
170 static inline void _gpio_dbck_enable(struct gpio_bank *bank)
171 {
172 	if (bank->dbck_enable_mask && !bank->dbck_enabled) {
173 		clk_enable(bank->dbck);
174 		bank->dbck_enabled = true;
175 
176 		__raw_writel(bank->dbck_enable_mask,
177 			     bank->base + bank->regs->debounce_en);
178 	}
179 }
180 
181 static inline void _gpio_dbck_disable(struct gpio_bank *bank)
182 {
183 	if (bank->dbck_enable_mask && bank->dbck_enabled) {
184 		/*
185 		 * Disable debounce before cutting it's clock. If debounce is
186 		 * enabled but the clock is not, GPIO module seems to be unable
187 		 * to detect events and generate interrupts at least on OMAP3.
188 		 */
189 		__raw_writel(0, bank->base + bank->regs->debounce_en);
190 
191 		clk_disable(bank->dbck);
192 		bank->dbck_enabled = false;
193 	}
194 }
195 
196 /**
197  * _set_gpio_debounce - low level gpio debounce time
198  * @bank: the gpio bank we're acting upon
199  * @gpio: the gpio number on this @gpio
200  * @debounce: debounce time to use
201  *
202  * OMAP's debounce time is in 31us steps so we need
203  * to convert and round up to the closest unit.
204  */
205 static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
206 		unsigned debounce)
207 {
208 	void __iomem		*reg;
209 	u32			val;
210 	u32			l;
211 
212 	if (!bank->dbck_flag)
213 		return;
214 
215 	if (debounce < 32)
216 		debounce = 0x01;
217 	else if (debounce > 7936)
218 		debounce = 0xff;
219 	else
220 		debounce = (debounce / 0x1f) - 1;
221 
222 	l = GPIO_BIT(bank, gpio);
223 
224 	clk_enable(bank->dbck);
225 	reg = bank->base + bank->regs->debounce;
226 	__raw_writel(debounce, reg);
227 
228 	reg = bank->base + bank->regs->debounce_en;
229 	val = __raw_readl(reg);
230 
231 	if (debounce)
232 		val |= l;
233 	else
234 		val &= ~l;
235 	bank->dbck_enable_mask = val;
236 
237 	__raw_writel(val, reg);
238 	clk_disable(bank->dbck);
239 	/*
240 	 * Enable debounce clock per module.
241 	 * This call is mandatory because in omap_gpio_request() when
242 	 * *_runtime_get_sync() is called,  _gpio_dbck_enable() within
243 	 * runtime callbck fails to turn on dbck because dbck_enable_mask
244 	 * used within _gpio_dbck_enable() is still not initialized at
245 	 * that point. Therefore we have to enable dbck here.
246 	 */
247 	_gpio_dbck_enable(bank);
248 	if (bank->dbck_enable_mask) {
249 		bank->context.debounce = debounce;
250 		bank->context.debounce_en = val;
251 	}
252 }
253 
254 /**
255  * _clear_gpio_debounce - clear debounce settings for a gpio
256  * @bank: the gpio bank we're acting upon
257  * @gpio: the gpio number on this @gpio
258  *
259  * If a gpio is using debounce, then clear the debounce enable bit and if
260  * this is the only gpio in this bank using debounce, then clear the debounce
261  * time too. The debounce clock will also be disabled when calling this function
262  * if this is the only gpio in the bank using debounce.
263  */
264 static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio)
265 {
266 	u32 gpio_bit = GPIO_BIT(bank, gpio);
267 
268 	if (!bank->dbck_flag)
269 		return;
270 
271 	if (!(bank->dbck_enable_mask & gpio_bit))
272 		return;
273 
274 	bank->dbck_enable_mask &= ~gpio_bit;
275 	bank->context.debounce_en &= ~gpio_bit;
276 	__raw_writel(bank->context.debounce_en,
277 		     bank->base + bank->regs->debounce_en);
278 
279 	if (!bank->dbck_enable_mask) {
280 		bank->context.debounce = 0;
281 		__raw_writel(bank->context.debounce, bank->base +
282 			     bank->regs->debounce);
283 		clk_disable(bank->dbck);
284 		bank->dbck_enabled = false;
285 	}
286 }
287 
288 static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
289 						unsigned trigger)
290 {
291 	void __iomem *base = bank->base;
292 	u32 gpio_bit = 1 << gpio;
293 
294 	_gpio_rmw(base, bank->regs->leveldetect0, gpio_bit,
295 		  trigger & IRQ_TYPE_LEVEL_LOW);
296 	_gpio_rmw(base, bank->regs->leveldetect1, gpio_bit,
297 		  trigger & IRQ_TYPE_LEVEL_HIGH);
298 	_gpio_rmw(base, bank->regs->risingdetect, gpio_bit,
299 		  trigger & IRQ_TYPE_EDGE_RISING);
300 	_gpio_rmw(base, bank->regs->fallingdetect, gpio_bit,
301 		  trigger & IRQ_TYPE_EDGE_FALLING);
302 
303 	bank->context.leveldetect0 =
304 			__raw_readl(bank->base + bank->regs->leveldetect0);
305 	bank->context.leveldetect1 =
306 			__raw_readl(bank->base + bank->regs->leveldetect1);
307 	bank->context.risingdetect =
308 			__raw_readl(bank->base + bank->regs->risingdetect);
309 	bank->context.fallingdetect =
310 			__raw_readl(bank->base + bank->regs->fallingdetect);
311 
312 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
313 		_gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0);
314 		bank->context.wake_en =
315 			__raw_readl(bank->base + bank->regs->wkup_en);
316 	}
317 
318 	/* This part needs to be executed always for OMAP{34xx, 44xx} */
319 	if (!bank->regs->irqctrl) {
320 		/* On omap24xx proceed only when valid GPIO bit is set */
321 		if (bank->non_wakeup_gpios) {
322 			if (!(bank->non_wakeup_gpios & gpio_bit))
323 				goto exit;
324 		}
325 
326 		/*
327 		 * Log the edge gpio and manually trigger the IRQ
328 		 * after resume if the input level changes
329 		 * to avoid irq lost during PER RET/OFF mode
330 		 * Applies for omap2 non-wakeup gpio and all omap3 gpios
331 		 */
332 		if (trigger & IRQ_TYPE_EDGE_BOTH)
333 			bank->enabled_non_wakeup_gpios |= gpio_bit;
334 		else
335 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
336 	}
337 
338 exit:
339 	bank->level_mask =
340 		__raw_readl(bank->base + bank->regs->leveldetect0) |
341 		__raw_readl(bank->base + bank->regs->leveldetect1);
342 }
343 
344 #ifdef CONFIG_ARCH_OMAP1
345 /*
346  * This only applies to chips that can't do both rising and falling edge
347  * detection at once.  For all other chips, this function is a noop.
348  */
349 static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
350 {
351 	void __iomem *reg = bank->base;
352 	u32 l = 0;
353 
354 	if (!bank->regs->irqctrl)
355 		return;
356 
357 	reg += bank->regs->irqctrl;
358 
359 	l = __raw_readl(reg);
360 	if ((l >> gpio) & 1)
361 		l &= ~(1 << gpio);
362 	else
363 		l |= 1 << gpio;
364 
365 	__raw_writel(l, reg);
366 }
367 #else
368 static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {}
369 #endif
370 
371 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
372 							unsigned trigger)
373 {
374 	void __iomem *reg = bank->base;
375 	void __iomem *base = bank->base;
376 	u32 l = 0;
377 
378 	if (bank->regs->leveldetect0 && bank->regs->wkup_en) {
379 		set_gpio_trigger(bank, gpio, trigger);
380 	} else if (bank->regs->irqctrl) {
381 		reg += bank->regs->irqctrl;
382 
383 		l = __raw_readl(reg);
384 		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
385 			bank->toggle_mask |= 1 << gpio;
386 		if (trigger & IRQ_TYPE_EDGE_RISING)
387 			l |= 1 << gpio;
388 		else if (trigger & IRQ_TYPE_EDGE_FALLING)
389 			l &= ~(1 << gpio);
390 		else
391 			return -EINVAL;
392 
393 		__raw_writel(l, reg);
394 	} else if (bank->regs->edgectrl1) {
395 		if (gpio & 0x08)
396 			reg += bank->regs->edgectrl2;
397 		else
398 			reg += bank->regs->edgectrl1;
399 
400 		gpio &= 0x07;
401 		l = __raw_readl(reg);
402 		l &= ~(3 << (gpio << 1));
403 		if (trigger & IRQ_TYPE_EDGE_RISING)
404 			l |= 2 << (gpio << 1);
405 		if (trigger & IRQ_TYPE_EDGE_FALLING)
406 			l |= 1 << (gpio << 1);
407 
408 		/* Enable wake-up during idle for dynamic tick */
409 		_gpio_rmw(base, bank->regs->wkup_en, 1 << gpio, trigger);
410 		bank->context.wake_en =
411 			__raw_readl(bank->base + bank->regs->wkup_en);
412 		__raw_writel(l, reg);
413 	}
414 	return 0;
415 }
416 
417 static int gpio_irq_type(struct irq_data *d, unsigned type)
418 {
419 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
420 	unsigned gpio = 0;
421 	int retval;
422 	unsigned long flags;
423 
424 #ifdef CONFIG_ARCH_OMAP1
425 	if (d->irq > IH_MPUIO_BASE)
426 		gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
427 #endif
428 
429 	if (!gpio)
430 		gpio = irq_to_gpio(bank, d->irq);
431 
432 	if (type & ~IRQ_TYPE_SENSE_MASK)
433 		return -EINVAL;
434 
435 	if (!bank->regs->leveldetect0 &&
436 		(type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
437 		return -EINVAL;
438 
439 	spin_lock_irqsave(&bank->lock, flags);
440 	retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type);
441 	spin_unlock_irqrestore(&bank->lock, flags);
442 
443 	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
444 		__irq_set_handler_locked(d->irq, handle_level_irq);
445 	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
446 		__irq_set_handler_locked(d->irq, handle_edge_irq);
447 
448 	return retval;
449 }
450 
451 static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
452 {
453 	void __iomem *reg = bank->base;
454 
455 	reg += bank->regs->irqstatus;
456 	__raw_writel(gpio_mask, reg);
457 
458 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
459 	if (bank->regs->irqstatus2) {
460 		reg = bank->base + bank->regs->irqstatus2;
461 		__raw_writel(gpio_mask, reg);
462 	}
463 
464 	/* Flush posted write for the irq status to avoid spurious interrupts */
465 	__raw_readl(reg);
466 }
467 
468 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
469 {
470 	_clear_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
471 }
472 
473 static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
474 {
475 	void __iomem *reg = bank->base;
476 	u32 l;
477 	u32 mask = (1 << bank->width) - 1;
478 
479 	reg += bank->regs->irqenable;
480 	l = __raw_readl(reg);
481 	if (bank->regs->irqenable_inv)
482 		l = ~l;
483 	l &= mask;
484 	return l;
485 }
486 
487 static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
488 {
489 	void __iomem *reg = bank->base;
490 	u32 l;
491 
492 	if (bank->regs->set_irqenable) {
493 		reg += bank->regs->set_irqenable;
494 		l = gpio_mask;
495 		bank->context.irqenable1 |= gpio_mask;
496 	} else {
497 		reg += bank->regs->irqenable;
498 		l = __raw_readl(reg);
499 		if (bank->regs->irqenable_inv)
500 			l &= ~gpio_mask;
501 		else
502 			l |= gpio_mask;
503 		bank->context.irqenable1 = l;
504 	}
505 
506 	__raw_writel(l, reg);
507 }
508 
509 static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
510 {
511 	void __iomem *reg = bank->base;
512 	u32 l;
513 
514 	if (bank->regs->clr_irqenable) {
515 		reg += bank->regs->clr_irqenable;
516 		l = gpio_mask;
517 		bank->context.irqenable1 &= ~gpio_mask;
518 	} else {
519 		reg += bank->regs->irqenable;
520 		l = __raw_readl(reg);
521 		if (bank->regs->irqenable_inv)
522 			l |= gpio_mask;
523 		else
524 			l &= ~gpio_mask;
525 		bank->context.irqenable1 = l;
526 	}
527 
528 	__raw_writel(l, reg);
529 }
530 
531 static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
532 {
533 	if (enable)
534 		_enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
535 	else
536 		_disable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
537 }
538 
539 /*
540  * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
541  * 1510 does not seem to have a wake-up register. If JTAG is connected
542  * to the target, system will wake up always on GPIO events. While
543  * system is running all registered GPIO interrupts need to have wake-up
544  * enabled. When system is suspended, only selected GPIO interrupts need
545  * to have wake-up enabled.
546  */
547 static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
548 {
549 	u32 gpio_bit = GPIO_BIT(bank, gpio);
550 	unsigned long flags;
551 
552 	if (bank->non_wakeup_gpios & gpio_bit) {
553 		dev_err(bank->dev,
554 			"Unable to modify wakeup on non-wakeup GPIO%d\n", gpio);
555 		return -EINVAL;
556 	}
557 
558 	spin_lock_irqsave(&bank->lock, flags);
559 	if (enable)
560 		bank->context.wake_en |= gpio_bit;
561 	else
562 		bank->context.wake_en &= ~gpio_bit;
563 
564 	__raw_writel(bank->context.wake_en, bank->base + bank->regs->wkup_en);
565 	spin_unlock_irqrestore(&bank->lock, flags);
566 
567 	return 0;
568 }
569 
570 static void _reset_gpio(struct gpio_bank *bank, int gpio)
571 {
572 	_set_gpio_direction(bank, GPIO_INDEX(bank, gpio), 1);
573 	_set_gpio_irqenable(bank, gpio, 0);
574 	_clear_gpio_irqstatus(bank, gpio);
575 	_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
576 	_clear_gpio_debounce(bank, gpio);
577 }
578 
579 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
580 static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
581 {
582 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
583 	unsigned int gpio = irq_to_gpio(bank, d->irq);
584 
585 	return _set_gpio_wakeup(bank, gpio, enable);
586 }
587 
588 static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
589 {
590 	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
591 	unsigned long flags;
592 
593 	/*
594 	 * If this is the first gpio_request for the bank,
595 	 * enable the bank module.
596 	 */
597 	if (!bank->mod_usage)
598 		pm_runtime_get_sync(bank->dev);
599 
600 	spin_lock_irqsave(&bank->lock, flags);
601 	/* Set trigger to none. You need to enable the desired trigger with
602 	 * request_irq() or set_irq_type().
603 	 */
604 	_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
605 
606 	if (bank->regs->pinctrl) {
607 		void __iomem *reg = bank->base + bank->regs->pinctrl;
608 
609 		/* Claim the pin for MPU */
610 		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
611 	}
612 
613 	if (bank->regs->ctrl && !bank->mod_usage) {
614 		void __iomem *reg = bank->base + bank->regs->ctrl;
615 		u32 ctrl;
616 
617 		ctrl = __raw_readl(reg);
618 		/* Module is enabled, clocks are not gated */
619 		ctrl &= ~GPIO_MOD_CTRL_BIT;
620 		__raw_writel(ctrl, reg);
621 		bank->context.ctrl = ctrl;
622 	}
623 
624 	bank->mod_usage |= 1 << offset;
625 
626 	spin_unlock_irqrestore(&bank->lock, flags);
627 
628 	return 0;
629 }
630 
631 static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
632 {
633 	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
634 	void __iomem *base = bank->base;
635 	unsigned long flags;
636 
637 	spin_lock_irqsave(&bank->lock, flags);
638 
639 	if (bank->regs->wkup_en) {
640 		/* Disable wake-up during idle for dynamic tick */
641 		_gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0);
642 		bank->context.wake_en =
643 			__raw_readl(bank->base + bank->regs->wkup_en);
644 	}
645 
646 	bank->mod_usage &= ~(1 << offset);
647 
648 	if (bank->regs->ctrl && !bank->mod_usage) {
649 		void __iomem *reg = bank->base + bank->regs->ctrl;
650 		u32 ctrl;
651 
652 		ctrl = __raw_readl(reg);
653 		/* Module is disabled, clocks are gated */
654 		ctrl |= GPIO_MOD_CTRL_BIT;
655 		__raw_writel(ctrl, reg);
656 		bank->context.ctrl = ctrl;
657 	}
658 
659 	_reset_gpio(bank, bank->chip.base + offset);
660 	spin_unlock_irqrestore(&bank->lock, flags);
661 
662 	/*
663 	 * If this is the last gpio to be freed in the bank,
664 	 * disable the bank module.
665 	 */
666 	if (!bank->mod_usage)
667 		pm_runtime_put(bank->dev);
668 }
669 
670 /*
671  * We need to unmask the GPIO bank interrupt as soon as possible to
672  * avoid missing GPIO interrupts for other lines in the bank.
673  * Then we need to mask-read-clear-unmask the triggered GPIO lines
674  * in the bank to avoid missing nested interrupts for a GPIO line.
675  * If we wait to unmask individual GPIO lines in the bank after the
676  * line's interrupt handler has been run, we may miss some nested
677  * interrupts.
678  */
679 static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
680 {
681 	void __iomem *isr_reg = NULL;
682 	u32 isr;
683 	unsigned int gpio_irq, gpio_index;
684 	struct gpio_bank *bank;
685 	int unmasked = 0;
686 	struct irq_chip *chip = irq_desc_get_chip(desc);
687 
688 	chained_irq_enter(chip, desc);
689 
690 	bank = irq_get_handler_data(irq);
691 	isr_reg = bank->base + bank->regs->irqstatus;
692 	pm_runtime_get_sync(bank->dev);
693 
694 	if (WARN_ON(!isr_reg))
695 		goto exit;
696 
697 	while(1) {
698 		u32 isr_saved, level_mask = 0;
699 		u32 enabled;
700 
701 		enabled = _get_gpio_irqbank_mask(bank);
702 		isr_saved = isr = __raw_readl(isr_reg) & enabled;
703 
704 		if (bank->level_mask)
705 			level_mask = bank->level_mask & enabled;
706 
707 		/* clear edge sensitive interrupts before handler(s) are
708 		called so that we don't miss any interrupt occurred while
709 		executing them */
710 		_disable_gpio_irqbank(bank, isr_saved & ~level_mask);
711 		_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
712 		_enable_gpio_irqbank(bank, isr_saved & ~level_mask);
713 
714 		/* if there is only edge sensitive GPIO pin interrupts
715 		configured, we could unmask GPIO bank interrupt immediately */
716 		if (!level_mask && !unmasked) {
717 			unmasked = 1;
718 			chained_irq_exit(chip, desc);
719 		}
720 
721 		if (!isr)
722 			break;
723 
724 		gpio_irq = bank->irq_base;
725 		for (; isr != 0; isr >>= 1, gpio_irq++) {
726 			int gpio = irq_to_gpio(bank, gpio_irq);
727 
728 			if (!(isr & 1))
729 				continue;
730 
731 			gpio_index = GPIO_INDEX(bank, gpio);
732 
733 			/*
734 			 * Some chips can't respond to both rising and falling
735 			 * at the same time.  If this irq was requested with
736 			 * both flags, we need to flip the ICR data for the IRQ
737 			 * to respond to the IRQ for the opposite direction.
738 			 * This will be indicated in the bank toggle_mask.
739 			 */
740 			if (bank->toggle_mask & (1 << gpio_index))
741 				_toggle_gpio_edge_triggering(bank, gpio_index);
742 
743 			generic_handle_irq(gpio_irq);
744 		}
745 	}
746 	/* if bank has any level sensitive GPIO pin interrupt
747 	configured, we must unmask the bank interrupt only after
748 	handler(s) are executed in order to avoid spurious bank
749 	interrupt */
750 exit:
751 	if (!unmasked)
752 		chained_irq_exit(chip, desc);
753 	pm_runtime_put(bank->dev);
754 }
755 
756 static void gpio_irq_shutdown(struct irq_data *d)
757 {
758 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
759 	unsigned int gpio = irq_to_gpio(bank, d->irq);
760 	unsigned long flags;
761 
762 	spin_lock_irqsave(&bank->lock, flags);
763 	_reset_gpio(bank, gpio);
764 	spin_unlock_irqrestore(&bank->lock, flags);
765 }
766 
767 static void gpio_ack_irq(struct irq_data *d)
768 {
769 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
770 	unsigned int gpio = irq_to_gpio(bank, d->irq);
771 
772 	_clear_gpio_irqstatus(bank, gpio);
773 }
774 
775 static void gpio_mask_irq(struct irq_data *d)
776 {
777 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
778 	unsigned int gpio = irq_to_gpio(bank, d->irq);
779 	unsigned long flags;
780 
781 	spin_lock_irqsave(&bank->lock, flags);
782 	_set_gpio_irqenable(bank, gpio, 0);
783 	_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
784 	spin_unlock_irqrestore(&bank->lock, flags);
785 }
786 
787 static void gpio_unmask_irq(struct irq_data *d)
788 {
789 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
790 	unsigned int gpio = irq_to_gpio(bank, d->irq);
791 	unsigned int irq_mask = GPIO_BIT(bank, gpio);
792 	u32 trigger = irqd_get_trigger_type(d);
793 	unsigned long flags;
794 
795 	spin_lock_irqsave(&bank->lock, flags);
796 	if (trigger)
797 		_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), trigger);
798 
799 	/* For level-triggered GPIOs, the clearing must be done after
800 	 * the HW source is cleared, thus after the handler has run */
801 	if (bank->level_mask & irq_mask) {
802 		_set_gpio_irqenable(bank, gpio, 0);
803 		_clear_gpio_irqstatus(bank, gpio);
804 	}
805 
806 	_set_gpio_irqenable(bank, gpio, 1);
807 	spin_unlock_irqrestore(&bank->lock, flags);
808 }
809 
810 static struct irq_chip gpio_irq_chip = {
811 	.name		= "GPIO",
812 	.irq_shutdown	= gpio_irq_shutdown,
813 	.irq_ack	= gpio_ack_irq,
814 	.irq_mask	= gpio_mask_irq,
815 	.irq_unmask	= gpio_unmask_irq,
816 	.irq_set_type	= gpio_irq_type,
817 	.irq_set_wake	= gpio_wake_enable,
818 };
819 
820 /*---------------------------------------------------------------------*/
821 
822 static int omap_mpuio_suspend_noirq(struct device *dev)
823 {
824 	struct platform_device *pdev = to_platform_device(dev);
825 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
826 	void __iomem		*mask_reg = bank->base +
827 					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
828 	unsigned long		flags;
829 
830 	spin_lock_irqsave(&bank->lock, flags);
831 	__raw_writel(0xffff & ~bank->context.wake_en, mask_reg);
832 	spin_unlock_irqrestore(&bank->lock, flags);
833 
834 	return 0;
835 }
836 
837 static int omap_mpuio_resume_noirq(struct device *dev)
838 {
839 	struct platform_device *pdev = to_platform_device(dev);
840 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
841 	void __iomem		*mask_reg = bank->base +
842 					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
843 	unsigned long		flags;
844 
845 	spin_lock_irqsave(&bank->lock, flags);
846 	__raw_writel(bank->context.wake_en, mask_reg);
847 	spin_unlock_irqrestore(&bank->lock, flags);
848 
849 	return 0;
850 }
851 
852 static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
853 	.suspend_noirq = omap_mpuio_suspend_noirq,
854 	.resume_noirq = omap_mpuio_resume_noirq,
855 };
856 
857 /* use platform_driver for this. */
858 static struct platform_driver omap_mpuio_driver = {
859 	.driver		= {
860 		.name	= "mpuio",
861 		.pm	= &omap_mpuio_dev_pm_ops,
862 	},
863 };
864 
865 static struct platform_device omap_mpuio_device = {
866 	.name		= "mpuio",
867 	.id		= -1,
868 	.dev = {
869 		.driver = &omap_mpuio_driver.driver,
870 	}
871 	/* could list the /proc/iomem resources */
872 };
873 
874 static inline void mpuio_init(struct gpio_bank *bank)
875 {
876 	platform_set_drvdata(&omap_mpuio_device, bank);
877 
878 	if (platform_driver_register(&omap_mpuio_driver) == 0)
879 		(void) platform_device_register(&omap_mpuio_device);
880 }
881 
882 /*---------------------------------------------------------------------*/
883 
884 static int gpio_input(struct gpio_chip *chip, unsigned offset)
885 {
886 	struct gpio_bank *bank;
887 	unsigned long flags;
888 
889 	bank = container_of(chip, struct gpio_bank, chip);
890 	spin_lock_irqsave(&bank->lock, flags);
891 	_set_gpio_direction(bank, offset, 1);
892 	spin_unlock_irqrestore(&bank->lock, flags);
893 	return 0;
894 }
895 
896 static int gpio_is_input(struct gpio_bank *bank, int mask)
897 {
898 	void __iomem *reg = bank->base + bank->regs->direction;
899 
900 	return __raw_readl(reg) & mask;
901 }
902 
903 static int gpio_get(struct gpio_chip *chip, unsigned offset)
904 {
905 	struct gpio_bank *bank;
906 	u32 mask;
907 
908 	bank = container_of(chip, struct gpio_bank, chip);
909 	mask = (1 << offset);
910 
911 	if (gpio_is_input(bank, mask))
912 		return _get_gpio_datain(bank, offset);
913 	else
914 		return _get_gpio_dataout(bank, offset);
915 }
916 
917 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
918 {
919 	struct gpio_bank *bank;
920 	unsigned long flags;
921 
922 	bank = container_of(chip, struct gpio_bank, chip);
923 	spin_lock_irqsave(&bank->lock, flags);
924 	bank->set_dataout(bank, offset, value);
925 	_set_gpio_direction(bank, offset, 0);
926 	spin_unlock_irqrestore(&bank->lock, flags);
927 	return 0;
928 }
929 
930 static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
931 		unsigned debounce)
932 {
933 	struct gpio_bank *bank;
934 	unsigned long flags;
935 
936 	bank = container_of(chip, struct gpio_bank, chip);
937 
938 	spin_lock_irqsave(&bank->lock, flags);
939 	_set_gpio_debounce(bank, offset, debounce);
940 	spin_unlock_irqrestore(&bank->lock, flags);
941 
942 	return 0;
943 }
944 
945 static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
946 {
947 	struct gpio_bank *bank;
948 	unsigned long flags;
949 
950 	bank = container_of(chip, struct gpio_bank, chip);
951 	spin_lock_irqsave(&bank->lock, flags);
952 	bank->set_dataout(bank, offset, value);
953 	spin_unlock_irqrestore(&bank->lock, flags);
954 }
955 
956 static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
957 {
958 	struct gpio_bank *bank;
959 
960 	bank = container_of(chip, struct gpio_bank, chip);
961 	return bank->irq_base + offset;
962 }
963 
964 /*---------------------------------------------------------------------*/
965 
966 static void __init omap_gpio_show_rev(struct gpio_bank *bank)
967 {
968 	static bool called;
969 	u32 rev;
970 
971 	if (called || bank->regs->revision == USHRT_MAX)
972 		return;
973 
974 	rev = __raw_readw(bank->base + bank->regs->revision);
975 	pr_info("OMAP GPIO hardware version %d.%d\n",
976 		(rev >> 4) & 0x0f, rev & 0x0f);
977 
978 	called = true;
979 }
980 
981 /* This lock class tells lockdep that GPIO irqs are in a different
982  * category than their parents, so it won't report false recursion.
983  */
984 static struct lock_class_key gpio_lock_class;
985 
986 static void omap_gpio_mod_init(struct gpio_bank *bank)
987 {
988 	void __iomem *base = bank->base;
989 	u32 l = 0xffffffff;
990 
991 	if (bank->width == 16)
992 		l = 0xffff;
993 
994 	if (bank->is_mpuio) {
995 		__raw_writel(l, bank->base + bank->regs->irqenable);
996 		return;
997 	}
998 
999 	_gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv);
1000 	_gpio_rmw(base, bank->regs->irqstatus, l, !bank->regs->irqenable_inv);
1001 	if (bank->regs->debounce_en)
1002 		__raw_writel(0, base + bank->regs->debounce_en);
1003 
1004 	/* Save OE default value (0xffffffff) in the context */
1005 	bank->context.oe = __raw_readl(bank->base + bank->regs->direction);
1006 	 /* Initialize interface clk ungated, module enabled */
1007 	if (bank->regs->ctrl)
1008 		__raw_writel(0, base + bank->regs->ctrl);
1009 
1010 	bank->dbck = clk_get(bank->dev, "dbclk");
1011 	if (IS_ERR(bank->dbck))
1012 		dev_err(bank->dev, "Could not get gpio dbck\n");
1013 }
1014 
1015 static void
1016 omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
1017 		    unsigned int num)
1018 {
1019 	struct irq_chip_generic *gc;
1020 	struct irq_chip_type *ct;
1021 
1022 	gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
1023 				    handle_simple_irq);
1024 	if (!gc) {
1025 		dev_err(bank->dev, "Memory alloc failed for gc\n");
1026 		return;
1027 	}
1028 
1029 	ct = gc->chip_types;
1030 
1031 	/* NOTE: No ack required, reading IRQ status clears it. */
1032 	ct->chip.irq_mask = irq_gc_mask_set_bit;
1033 	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
1034 	ct->chip.irq_set_type = gpio_irq_type;
1035 
1036 	if (bank->regs->wkup_en)
1037 		ct->chip.irq_set_wake = gpio_wake_enable,
1038 
1039 	ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
1040 	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
1041 			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
1042 }
1043 
1044 static void omap_gpio_chip_init(struct gpio_bank *bank)
1045 {
1046 	int j;
1047 	static int gpio;
1048 
1049 	/*
1050 	 * REVISIT eventually switch from OMAP-specific gpio structs
1051 	 * over to the generic ones
1052 	 */
1053 	bank->chip.request = omap_gpio_request;
1054 	bank->chip.free = omap_gpio_free;
1055 	bank->chip.direction_input = gpio_input;
1056 	bank->chip.get = gpio_get;
1057 	bank->chip.direction_output = gpio_output;
1058 	bank->chip.set_debounce = gpio_debounce;
1059 	bank->chip.set = gpio_set;
1060 	bank->chip.to_irq = gpio_2irq;
1061 	if (bank->is_mpuio) {
1062 		bank->chip.label = "mpuio";
1063 		if (bank->regs->wkup_en)
1064 			bank->chip.dev = &omap_mpuio_device.dev;
1065 		bank->chip.base = OMAP_MPUIO(0);
1066 	} else {
1067 		bank->chip.label = "gpio";
1068 		bank->chip.base = gpio;
1069 		gpio += bank->width;
1070 	}
1071 	bank->chip.ngpio = bank->width;
1072 
1073 	gpiochip_add(&bank->chip);
1074 
1075 	for (j = bank->irq_base; j < bank->irq_base + bank->width; j++) {
1076 		irq_set_lockdep_class(j, &gpio_lock_class);
1077 		irq_set_chip_data(j, bank);
1078 		if (bank->is_mpuio) {
1079 			omap_mpuio_alloc_gc(bank, j, bank->width);
1080 		} else {
1081 			irq_set_chip(j, &gpio_irq_chip);
1082 			irq_set_handler(j, handle_simple_irq);
1083 			set_irq_flags(j, IRQF_VALID);
1084 		}
1085 	}
1086 	irq_set_chained_handler(bank->irq, gpio_irq_handler);
1087 	irq_set_handler_data(bank->irq, bank);
1088 }
1089 
1090 static const struct of_device_id omap_gpio_match[];
1091 
1092 static int omap_gpio_probe(struct platform_device *pdev)
1093 {
1094 	struct device *dev = &pdev->dev;
1095 	struct device_node *node = dev->of_node;
1096 	const struct of_device_id *match;
1097 	const struct omap_gpio_platform_data *pdata;
1098 	struct resource *res;
1099 	struct gpio_bank *bank;
1100 	int ret = 0;
1101 
1102 	match = of_match_device(of_match_ptr(omap_gpio_match), dev);
1103 
1104 	pdata = match ? match->data : dev->platform_data;
1105 	if (!pdata)
1106 		return -EINVAL;
1107 
1108 	bank = devm_kzalloc(dev, sizeof(struct gpio_bank), GFP_KERNEL);
1109 	if (!bank) {
1110 		dev_err(dev, "Memory alloc failed\n");
1111 		return -ENOMEM;
1112 	}
1113 
1114 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1115 	if (unlikely(!res)) {
1116 		dev_err(dev, "Invalid IRQ resource\n");
1117 		return -ENODEV;
1118 	}
1119 
1120 	bank->irq = res->start;
1121 	bank->dev = dev;
1122 	bank->dbck_flag = pdata->dbck_flag;
1123 	bank->stride = pdata->bank_stride;
1124 	bank->width = pdata->bank_width;
1125 	bank->is_mpuio = pdata->is_mpuio;
1126 	bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
1127 	bank->loses_context = pdata->loses_context;
1128 	bank->regs = pdata->regs;
1129 #ifdef CONFIG_OF_GPIO
1130 	bank->chip.of_node = of_node_get(node);
1131 #endif
1132 
1133 	bank->irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
1134 	if (bank->irq_base < 0) {
1135 		dev_err(dev, "Couldn't allocate IRQ numbers\n");
1136 		return -ENODEV;
1137 	}
1138 
1139 	bank->domain = irq_domain_add_legacy(node, bank->width, bank->irq_base,
1140 					     0, &irq_domain_simple_ops, NULL);
1141 
1142 	if (bank->regs->set_dataout && bank->regs->clr_dataout)
1143 		bank->set_dataout = _set_gpio_dataout_reg;
1144 	else
1145 		bank->set_dataout = _set_gpio_dataout_mask;
1146 
1147 	spin_lock_init(&bank->lock);
1148 
1149 	/* Static mapping, never released */
1150 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1151 	if (unlikely(!res)) {
1152 		dev_err(dev, "Invalid mem resource\n");
1153 		return -ENODEV;
1154 	}
1155 
1156 	if (!devm_request_mem_region(dev, res->start, resource_size(res),
1157 				     pdev->name)) {
1158 		dev_err(dev, "Region already claimed\n");
1159 		return -EBUSY;
1160 	}
1161 
1162 	bank->base = devm_ioremap(dev, res->start, resource_size(res));
1163 	if (!bank->base) {
1164 		dev_err(dev, "Could not ioremap\n");
1165 		return -ENOMEM;
1166 	}
1167 
1168 	platform_set_drvdata(pdev, bank);
1169 
1170 	pm_runtime_enable(bank->dev);
1171 	pm_runtime_irq_safe(bank->dev);
1172 	pm_runtime_get_sync(bank->dev);
1173 
1174 	if (bank->is_mpuio)
1175 		mpuio_init(bank);
1176 
1177 	omap_gpio_mod_init(bank);
1178 	omap_gpio_chip_init(bank);
1179 	omap_gpio_show_rev(bank);
1180 
1181 	if (bank->loses_context)
1182 		bank->get_context_loss_count = pdata->get_context_loss_count;
1183 
1184 	pm_runtime_put(bank->dev);
1185 
1186 	list_add_tail(&bank->node, &omap_gpio_list);
1187 
1188 	return ret;
1189 }
1190 
1191 #ifdef CONFIG_ARCH_OMAP2PLUS
1192 
1193 #if defined(CONFIG_PM_RUNTIME)
1194 static void omap_gpio_restore_context(struct gpio_bank *bank);
1195 
1196 static int omap_gpio_runtime_suspend(struct device *dev)
1197 {
1198 	struct platform_device *pdev = to_platform_device(dev);
1199 	struct gpio_bank *bank = platform_get_drvdata(pdev);
1200 	u32 l1 = 0, l2 = 0;
1201 	unsigned long flags;
1202 	u32 wake_low, wake_hi;
1203 
1204 	spin_lock_irqsave(&bank->lock, flags);
1205 
1206 	/*
1207 	 * Only edges can generate a wakeup event to the PRCM.
1208 	 *
1209 	 * Therefore, ensure any wake-up capable GPIOs have
1210 	 * edge-detection enabled before going idle to ensure a wakeup
1211 	 * to the PRCM is generated on a GPIO transition. (c.f. 34xx
1212 	 * NDA TRM 25.5.3.1)
1213 	 *
1214 	 * The normal values will be restored upon ->runtime_resume()
1215 	 * by writing back the values saved in bank->context.
1216 	 */
1217 	wake_low = bank->context.leveldetect0 & bank->context.wake_en;
1218 	if (wake_low)
1219 		__raw_writel(wake_low | bank->context.fallingdetect,
1220 			     bank->base + bank->regs->fallingdetect);
1221 	wake_hi = bank->context.leveldetect1 & bank->context.wake_en;
1222 	if (wake_hi)
1223 		__raw_writel(wake_hi | bank->context.risingdetect,
1224 			     bank->base + bank->regs->risingdetect);
1225 
1226 	if (!bank->enabled_non_wakeup_gpios)
1227 		goto update_gpio_context_count;
1228 
1229 	if (bank->power_mode != OFF_MODE) {
1230 		bank->power_mode = 0;
1231 		goto update_gpio_context_count;
1232 	}
1233 	/*
1234 	 * If going to OFF, remove triggering for all
1235 	 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
1236 	 * generated.  See OMAP2420 Errata item 1.101.
1237 	 */
1238 	bank->saved_datain = __raw_readl(bank->base +
1239 						bank->regs->datain);
1240 	l1 = bank->context.fallingdetect;
1241 	l2 = bank->context.risingdetect;
1242 
1243 	l1 &= ~bank->enabled_non_wakeup_gpios;
1244 	l2 &= ~bank->enabled_non_wakeup_gpios;
1245 
1246 	__raw_writel(l1, bank->base + bank->regs->fallingdetect);
1247 	__raw_writel(l2, bank->base + bank->regs->risingdetect);
1248 
1249 	bank->workaround_enabled = true;
1250 
1251 update_gpio_context_count:
1252 	if (bank->get_context_loss_count)
1253 		bank->context_loss_count =
1254 				bank->get_context_loss_count(bank->dev);
1255 
1256 	_gpio_dbck_disable(bank);
1257 	spin_unlock_irqrestore(&bank->lock, flags);
1258 
1259 	return 0;
1260 }
1261 
1262 static int omap_gpio_runtime_resume(struct device *dev)
1263 {
1264 	struct platform_device *pdev = to_platform_device(dev);
1265 	struct gpio_bank *bank = platform_get_drvdata(pdev);
1266 	int context_lost_cnt_after;
1267 	u32 l = 0, gen, gen0, gen1;
1268 	unsigned long flags;
1269 
1270 	spin_lock_irqsave(&bank->lock, flags);
1271 	_gpio_dbck_enable(bank);
1272 
1273 	/*
1274 	 * In ->runtime_suspend(), level-triggered, wakeup-enabled
1275 	 * GPIOs were set to edge trigger also in order to be able to
1276 	 * generate a PRCM wakeup.  Here we restore the
1277 	 * pre-runtime_suspend() values for edge triggering.
1278 	 */
1279 	__raw_writel(bank->context.fallingdetect,
1280 		     bank->base + bank->regs->fallingdetect);
1281 	__raw_writel(bank->context.risingdetect,
1282 		     bank->base + bank->regs->risingdetect);
1283 
1284 	if (bank->get_context_loss_count) {
1285 		context_lost_cnt_after =
1286 			bank->get_context_loss_count(bank->dev);
1287 		if (context_lost_cnt_after != bank->context_loss_count) {
1288 			omap_gpio_restore_context(bank);
1289 		} else {
1290 			spin_unlock_irqrestore(&bank->lock, flags);
1291 			return 0;
1292 		}
1293 	}
1294 
1295 	if (!bank->workaround_enabled) {
1296 		spin_unlock_irqrestore(&bank->lock, flags);
1297 		return 0;
1298 	}
1299 
1300 	__raw_writel(bank->context.fallingdetect,
1301 			bank->base + bank->regs->fallingdetect);
1302 	__raw_writel(bank->context.risingdetect,
1303 			bank->base + bank->regs->risingdetect);
1304 	l = __raw_readl(bank->base + bank->regs->datain);
1305 
1306 	/*
1307 	 * Check if any of the non-wakeup interrupt GPIOs have changed
1308 	 * state.  If so, generate an IRQ by software.  This is
1309 	 * horribly racy, but it's the best we can do to work around
1310 	 * this silicon bug.
1311 	 */
1312 	l ^= bank->saved_datain;
1313 	l &= bank->enabled_non_wakeup_gpios;
1314 
1315 	/*
1316 	 * No need to generate IRQs for the rising edge for gpio IRQs
1317 	 * configured with falling edge only; and vice versa.
1318 	 */
1319 	gen0 = l & bank->context.fallingdetect;
1320 	gen0 &= bank->saved_datain;
1321 
1322 	gen1 = l & bank->context.risingdetect;
1323 	gen1 &= ~(bank->saved_datain);
1324 
1325 	/* FIXME: Consider GPIO IRQs with level detections properly! */
1326 	gen = l & (~(bank->context.fallingdetect) &
1327 					 ~(bank->context.risingdetect));
1328 	/* Consider all GPIO IRQs needed to be updated */
1329 	gen |= gen0 | gen1;
1330 
1331 	if (gen) {
1332 		u32 old0, old1;
1333 
1334 		old0 = __raw_readl(bank->base + bank->regs->leveldetect0);
1335 		old1 = __raw_readl(bank->base + bank->regs->leveldetect1);
1336 
1337 		if (!bank->regs->irqstatus_raw0) {
1338 			__raw_writel(old0 | gen, bank->base +
1339 						bank->regs->leveldetect0);
1340 			__raw_writel(old1 | gen, bank->base +
1341 						bank->regs->leveldetect1);
1342 		}
1343 
1344 		if (bank->regs->irqstatus_raw0) {
1345 			__raw_writel(old0 | l, bank->base +
1346 						bank->regs->leveldetect0);
1347 			__raw_writel(old1 | l, bank->base +
1348 						bank->regs->leveldetect1);
1349 		}
1350 		__raw_writel(old0, bank->base + bank->regs->leveldetect0);
1351 		__raw_writel(old1, bank->base + bank->regs->leveldetect1);
1352 	}
1353 
1354 	bank->workaround_enabled = false;
1355 	spin_unlock_irqrestore(&bank->lock, flags);
1356 
1357 	return 0;
1358 }
1359 #endif /* CONFIG_PM_RUNTIME */
1360 
1361 void omap2_gpio_prepare_for_idle(int pwr_mode)
1362 {
1363 	struct gpio_bank *bank;
1364 
1365 	list_for_each_entry(bank, &omap_gpio_list, node) {
1366 		if (!bank->mod_usage || !bank->loses_context)
1367 			continue;
1368 
1369 		bank->power_mode = pwr_mode;
1370 
1371 		pm_runtime_put_sync_suspend(bank->dev);
1372 	}
1373 }
1374 
1375 void omap2_gpio_resume_after_idle(void)
1376 {
1377 	struct gpio_bank *bank;
1378 
1379 	list_for_each_entry(bank, &omap_gpio_list, node) {
1380 		if (!bank->mod_usage || !bank->loses_context)
1381 			continue;
1382 
1383 		pm_runtime_get_sync(bank->dev);
1384 	}
1385 }
1386 
1387 #if defined(CONFIG_PM_RUNTIME)
1388 static void omap_gpio_restore_context(struct gpio_bank *bank)
1389 {
1390 	__raw_writel(bank->context.wake_en,
1391 				bank->base + bank->regs->wkup_en);
1392 	__raw_writel(bank->context.ctrl, bank->base + bank->regs->ctrl);
1393 	__raw_writel(bank->context.leveldetect0,
1394 				bank->base + bank->regs->leveldetect0);
1395 	__raw_writel(bank->context.leveldetect1,
1396 				bank->base + bank->regs->leveldetect1);
1397 	__raw_writel(bank->context.risingdetect,
1398 				bank->base + bank->regs->risingdetect);
1399 	__raw_writel(bank->context.fallingdetect,
1400 				bank->base + bank->regs->fallingdetect);
1401 	if (bank->regs->set_dataout && bank->regs->clr_dataout)
1402 		__raw_writel(bank->context.dataout,
1403 				bank->base + bank->regs->set_dataout);
1404 	else
1405 		__raw_writel(bank->context.dataout,
1406 				bank->base + bank->regs->dataout);
1407 	__raw_writel(bank->context.oe, bank->base + bank->regs->direction);
1408 
1409 	if (bank->dbck_enable_mask) {
1410 		__raw_writel(bank->context.debounce, bank->base +
1411 					bank->regs->debounce);
1412 		__raw_writel(bank->context.debounce_en,
1413 					bank->base + bank->regs->debounce_en);
1414 	}
1415 
1416 	__raw_writel(bank->context.irqenable1,
1417 				bank->base + bank->regs->irqenable);
1418 	__raw_writel(bank->context.irqenable2,
1419 				bank->base + bank->regs->irqenable2);
1420 }
1421 #endif /* CONFIG_PM_RUNTIME */
1422 #else
1423 #define omap_gpio_runtime_suspend NULL
1424 #define omap_gpio_runtime_resume NULL
1425 #endif
1426 
1427 static const struct dev_pm_ops gpio_pm_ops = {
1428 	SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume,
1429 									NULL)
1430 };
1431 
1432 #if defined(CONFIG_OF)
1433 static struct omap_gpio_reg_offs omap2_gpio_regs = {
1434 	.revision =		OMAP24XX_GPIO_REVISION,
1435 	.direction =		OMAP24XX_GPIO_OE,
1436 	.datain =		OMAP24XX_GPIO_DATAIN,
1437 	.dataout =		OMAP24XX_GPIO_DATAOUT,
1438 	.set_dataout =		OMAP24XX_GPIO_SETDATAOUT,
1439 	.clr_dataout =		OMAP24XX_GPIO_CLEARDATAOUT,
1440 	.irqstatus =		OMAP24XX_GPIO_IRQSTATUS1,
1441 	.irqstatus2 =		OMAP24XX_GPIO_IRQSTATUS2,
1442 	.irqenable =		OMAP24XX_GPIO_IRQENABLE1,
1443 	.irqenable2 =		OMAP24XX_GPIO_IRQENABLE2,
1444 	.set_irqenable =	OMAP24XX_GPIO_SETIRQENABLE1,
1445 	.clr_irqenable =	OMAP24XX_GPIO_CLEARIRQENABLE1,
1446 	.debounce =		OMAP24XX_GPIO_DEBOUNCE_VAL,
1447 	.debounce_en =		OMAP24XX_GPIO_DEBOUNCE_EN,
1448 	.ctrl =			OMAP24XX_GPIO_CTRL,
1449 	.wkup_en =		OMAP24XX_GPIO_WAKE_EN,
1450 	.leveldetect0 =		OMAP24XX_GPIO_LEVELDETECT0,
1451 	.leveldetect1 =		OMAP24XX_GPIO_LEVELDETECT1,
1452 	.risingdetect =		OMAP24XX_GPIO_RISINGDETECT,
1453 	.fallingdetect =	OMAP24XX_GPIO_FALLINGDETECT,
1454 };
1455 
1456 static struct omap_gpio_reg_offs omap4_gpio_regs = {
1457 	.revision =		OMAP4_GPIO_REVISION,
1458 	.direction =		OMAP4_GPIO_OE,
1459 	.datain =		OMAP4_GPIO_DATAIN,
1460 	.dataout =		OMAP4_GPIO_DATAOUT,
1461 	.set_dataout =		OMAP4_GPIO_SETDATAOUT,
1462 	.clr_dataout =		OMAP4_GPIO_CLEARDATAOUT,
1463 	.irqstatus =		OMAP4_GPIO_IRQSTATUS0,
1464 	.irqstatus2 =		OMAP4_GPIO_IRQSTATUS1,
1465 	.irqenable =		OMAP4_GPIO_IRQSTATUSSET0,
1466 	.irqenable2 =		OMAP4_GPIO_IRQSTATUSSET1,
1467 	.set_irqenable =	OMAP4_GPIO_IRQSTATUSSET0,
1468 	.clr_irqenable =	OMAP4_GPIO_IRQSTATUSCLR0,
1469 	.debounce =		OMAP4_GPIO_DEBOUNCINGTIME,
1470 	.debounce_en =		OMAP4_GPIO_DEBOUNCENABLE,
1471 	.ctrl =			OMAP4_GPIO_CTRL,
1472 	.wkup_en =		OMAP4_GPIO_IRQWAKEN0,
1473 	.leveldetect0 =		OMAP4_GPIO_LEVELDETECT0,
1474 	.leveldetect1 =		OMAP4_GPIO_LEVELDETECT1,
1475 	.risingdetect =		OMAP4_GPIO_RISINGDETECT,
1476 	.fallingdetect =	OMAP4_GPIO_FALLINGDETECT,
1477 };
1478 
1479 const static struct omap_gpio_platform_data omap2_pdata = {
1480 	.regs = &omap2_gpio_regs,
1481 	.bank_width = 32,
1482 	.dbck_flag = false,
1483 };
1484 
1485 const static struct omap_gpio_platform_data omap3_pdata = {
1486 	.regs = &omap2_gpio_regs,
1487 	.bank_width = 32,
1488 	.dbck_flag = true,
1489 };
1490 
1491 const static struct omap_gpio_platform_data omap4_pdata = {
1492 	.regs = &omap4_gpio_regs,
1493 	.bank_width = 32,
1494 	.dbck_flag = true,
1495 };
1496 
1497 static const struct of_device_id omap_gpio_match[] = {
1498 	{
1499 		.compatible = "ti,omap4-gpio",
1500 		.data = &omap4_pdata,
1501 	},
1502 	{
1503 		.compatible = "ti,omap3-gpio",
1504 		.data = &omap3_pdata,
1505 	},
1506 	{
1507 		.compatible = "ti,omap2-gpio",
1508 		.data = &omap2_pdata,
1509 	},
1510 	{ },
1511 };
1512 MODULE_DEVICE_TABLE(of, omap_gpio_match);
1513 #endif
1514 
1515 static struct platform_driver omap_gpio_driver = {
1516 	.probe		= omap_gpio_probe,
1517 	.driver		= {
1518 		.name	= "omap_gpio",
1519 		.pm	= &gpio_pm_ops,
1520 		.of_match_table = of_match_ptr(omap_gpio_match),
1521 	},
1522 };
1523 
1524 /*
1525  * gpio driver register needs to be done before
1526  * machine_init functions access gpio APIs.
1527  * Hence omap_gpio_drv_reg() is a postcore_initcall.
1528  */
1529 static int __init omap_gpio_drv_reg(void)
1530 {
1531 	return platform_driver_register(&omap_gpio_driver);
1532 }
1533 postcore_initcall(omap_gpio_drv_reg);
1534