xref: /linux/drivers/gpio/gpio-ge.c (revision f4738f56d1dc62aaba69b33702a5ab098f1b8c63)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Driver for GE FPGA based GPIO
4  *
5  * Author: Martyn Welch <martyn.welch@ge.com>
6  *
7  * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
8  */
9 
10 /*
11  * TODO:
12  *
13  * Configuration of output modes (totem-pole/open-drain).
14  * Interrupt configuration - interrupts are always generated, the FPGA relies
15  * on the I/O interrupt controllers mask to stop them from being propagated.
16  */
17 
18 #include <linux/gpio/driver.h>
19 #include <linux/io.h>
20 #include <linux/kernel.h>
21 #include <linux/mod_devicetable.h>
22 #include <linux/module.h>
23 #include <linux/platform_device.h>
24 #include <linux/property.h>
25 #include <linux/slab.h>
26 
27 #define GEF_GPIO_DIRECT		0x00
28 #define GEF_GPIO_IN		0x04
29 #define GEF_GPIO_OUT		0x08
30 #define GEF_GPIO_TRIG		0x0C
31 #define GEF_GPIO_POLAR_A	0x10
32 #define GEF_GPIO_POLAR_B	0x14
33 #define GEF_GPIO_INT_STAT	0x18
34 #define GEF_GPIO_OVERRUN	0x1C
35 #define GEF_GPIO_MODE		0x20
36 
37 static const struct of_device_id gef_gpio_ids[] = {
38 	{
39 		.compatible	= "gef,sbc610-gpio",
40 		.data		= (void *)19,
41 	}, {
42 		.compatible	= "gef,sbc310-gpio",
43 		.data		= (void *)6,
44 	}, {
45 		.compatible	= "ge,imp3a-gpio",
46 		.data		= (void *)16,
47 	},
48 	{ }
49 };
50 MODULE_DEVICE_TABLE(of, gef_gpio_ids);
51 
52 static int __init gef_gpio_probe(struct platform_device *pdev)
53 {
54 	struct device *dev = &pdev->dev;
55 	struct gpio_chip *gc;
56 	void __iomem *regs;
57 	int ret;
58 
59 	gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
60 	if (!gc)
61 		return -ENOMEM;
62 
63 	regs = devm_platform_ioremap_resource(pdev, 0);
64 	if (IS_ERR(regs))
65 		return PTR_ERR(regs);
66 
67 	ret = bgpio_init(gc, dev, 4, regs + GEF_GPIO_IN, regs + GEF_GPIO_OUT,
68 			 NULL, NULL, regs + GEF_GPIO_DIRECT,
69 			 BGPIOF_BIG_ENDIAN_BYTE_ORDER);
70 	if (ret)
71 		return dev_err_probe(dev, ret, "bgpio_init failed\n");
72 
73 	/* Setup pointers to chip functions */
74 	gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pfw", dev_fwnode(dev));
75 	if (!gc->label)
76 		return -ENOMEM;
77 
78 	gc->base = -1;
79 	gc->ngpio = (uintptr_t)device_get_match_data(dev);
80 
81 	/* This function adds a memory mapped GPIO chip */
82 	ret = devm_gpiochip_add_data(dev, gc, NULL);
83 	if (ret)
84 		return dev_err_probe(dev, ret, "GPIO chip registration failed\n");
85 
86 	return 0;
87 };
88 
89 static struct platform_driver gef_gpio_driver = {
90 	.driver = {
91 		.name		= "gef-gpio",
92 		.of_match_table	= gef_gpio_ids,
93 	},
94 };
95 module_platform_driver_probe(gef_gpio_driver, gef_gpio_probe);
96 
97 MODULE_DESCRIPTION("GE I/O FPGA GPIO driver");
98 MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
99 MODULE_LICENSE("GPL");
100