1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * FPGA Manager Driver for FPGA Management Engine (FME) 4 * 5 * Copyright (C) 2017-2018 Intel Corporation, Inc. 6 * 7 * Authors: 8 * Kang Luwei <luwei.kang@intel.com> 9 * Xiao Guangrong <guangrong.xiao@linux.intel.com> 10 * Wu Hao <hao.wu@intel.com> 11 * Joseph Grecco <joe.grecco@intel.com> 12 * Enno Luebbers <enno.luebbers@intel.com> 13 * Tim Whisonant <tim.whisonant@intel.com> 14 * Ananda Ravuri <ananda.ravuri@intel.com> 15 * Christopher Rauer <christopher.rauer@intel.com> 16 * Henry Mitchel <henry.mitchel@intel.com> 17 */ 18 19 #include <linux/bitfield.h> 20 #include <linux/module.h> 21 #include <linux/iopoll.h> 22 #include <linux/io-64-nonatomic-lo-hi.h> 23 #include <linux/fpga/fpga-mgr.h> 24 25 #include "dfl-fme-pr.h" 26 27 /* FME Partial Reconfiguration Sub Feature Register Set */ 28 #define FME_PR_DFH 0x0 29 #define FME_PR_CTRL 0x8 30 #define FME_PR_STS 0x10 31 #define FME_PR_DATA 0x18 32 #define FME_PR_ERR 0x20 33 #define FME_PR_INTFC_ID_L 0xA8 34 #define FME_PR_INTFC_ID_H 0xB0 35 36 /* FME PR Control Register Bitfield */ 37 #define FME_PR_CTRL_PR_RST BIT_ULL(0) /* Reset PR engine */ 38 #define FME_PR_CTRL_PR_RSTACK BIT_ULL(4) /* Ack for PR engine reset */ 39 #define FME_PR_CTRL_PR_RGN_ID GENMASK_ULL(9, 7) /* PR Region ID */ 40 #define FME_PR_CTRL_PR_START BIT_ULL(12) /* Start to request PR service */ 41 #define FME_PR_CTRL_PR_COMPLETE BIT_ULL(13) /* PR data push completion */ 42 43 /* FME PR Status Register Bitfield */ 44 /* Number of available entries in HW queue inside the PR engine. */ 45 #define FME_PR_STS_PR_CREDIT GENMASK_ULL(8, 0) 46 #define FME_PR_STS_PR_STS BIT_ULL(16) /* PR operation status */ 47 #define FME_PR_STS_PR_STS_IDLE 0 48 #define FME_PR_STS_PR_CTRLR_STS GENMASK_ULL(22, 20) /* Controller status */ 49 #define FME_PR_STS_PR_HOST_STS GENMASK_ULL(27, 24) /* PR host status */ 50 51 /* FME PR Data Register Bitfield */ 52 /* PR data from the raw-binary file. */ 53 #define FME_PR_DATA_PR_DATA_RAW GENMASK_ULL(32, 0) 54 55 /* FME PR Error Register */ 56 /* PR Operation errors detected. */ 57 #define FME_PR_ERR_OPERATION_ERR BIT_ULL(0) 58 /* CRC error detected. */ 59 #define FME_PR_ERR_CRC_ERR BIT_ULL(1) 60 /* Incompatible PR bitstream detected. */ 61 #define FME_PR_ERR_INCOMPATIBLE_BS BIT_ULL(2) 62 /* PR data push protocol violated. */ 63 #define FME_PR_ERR_PROTOCOL_ERR BIT_ULL(3) 64 /* PR data fifo overflow error detected */ 65 #define FME_PR_ERR_FIFO_OVERFLOW BIT_ULL(4) 66 67 #define PR_WAIT_TIMEOUT 8000000 68 #define PR_HOST_STATUS_IDLE 0 69 70 struct fme_mgr_priv { 71 void __iomem *ioaddr; 72 u64 pr_error; 73 }; 74 75 static u64 pr_error_to_mgr_status(u64 err) 76 { 77 u64 status = 0; 78 79 if (err & FME_PR_ERR_OPERATION_ERR) 80 status |= FPGA_MGR_STATUS_OPERATION_ERR; 81 if (err & FME_PR_ERR_CRC_ERR) 82 status |= FPGA_MGR_STATUS_CRC_ERR; 83 if (err & FME_PR_ERR_INCOMPATIBLE_BS) 84 status |= FPGA_MGR_STATUS_INCOMPATIBLE_IMAGE_ERR; 85 if (err & FME_PR_ERR_PROTOCOL_ERR) 86 status |= FPGA_MGR_STATUS_IP_PROTOCOL_ERR; 87 if (err & FME_PR_ERR_FIFO_OVERFLOW) 88 status |= FPGA_MGR_STATUS_FIFO_OVERFLOW_ERR; 89 90 return status; 91 } 92 93 static u64 fme_mgr_pr_error_handle(void __iomem *fme_pr) 94 { 95 u64 pr_status, pr_error; 96 97 pr_status = readq(fme_pr + FME_PR_STS); 98 if (!(pr_status & FME_PR_STS_PR_STS)) 99 return 0; 100 101 pr_error = readq(fme_pr + FME_PR_ERR); 102 writeq(pr_error, fme_pr + FME_PR_ERR); 103 104 return pr_error; 105 } 106 107 static int fme_mgr_write_init(struct fpga_manager *mgr, 108 struct fpga_image_info *info, 109 const char *buf, size_t count) 110 { 111 struct device *dev = &mgr->dev; 112 struct fme_mgr_priv *priv = mgr->priv; 113 void __iomem *fme_pr = priv->ioaddr; 114 u64 pr_ctrl, pr_status; 115 116 if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) { 117 dev_err(dev, "only supports partial reconfiguration.\n"); 118 return -EINVAL; 119 } 120 121 dev_dbg(dev, "resetting PR before initiated PR\n"); 122 123 pr_ctrl = readq(fme_pr + FME_PR_CTRL); 124 pr_ctrl |= FME_PR_CTRL_PR_RST; 125 writeq(pr_ctrl, fme_pr + FME_PR_CTRL); 126 127 if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl, 128 pr_ctrl & FME_PR_CTRL_PR_RSTACK, 1, 129 PR_WAIT_TIMEOUT)) { 130 dev_err(dev, "PR Reset ACK timeout\n"); 131 return -ETIMEDOUT; 132 } 133 134 pr_ctrl = readq(fme_pr + FME_PR_CTRL); 135 pr_ctrl &= ~FME_PR_CTRL_PR_RST; 136 writeq(pr_ctrl, fme_pr + FME_PR_CTRL); 137 138 dev_dbg(dev, 139 "waiting for PR resource in HW to be initialized and ready\n"); 140 141 if (readq_poll_timeout(fme_pr + FME_PR_STS, pr_status, 142 (pr_status & FME_PR_STS_PR_STS) == 143 FME_PR_STS_PR_STS_IDLE, 1, PR_WAIT_TIMEOUT)) { 144 dev_err(dev, "PR Status timeout\n"); 145 priv->pr_error = fme_mgr_pr_error_handle(fme_pr); 146 return -ETIMEDOUT; 147 } 148 149 dev_dbg(dev, "check and clear previous PR error\n"); 150 priv->pr_error = fme_mgr_pr_error_handle(fme_pr); 151 if (priv->pr_error) 152 dev_dbg(dev, "previous PR error detected %llx\n", 153 (unsigned long long)priv->pr_error); 154 155 dev_dbg(dev, "set PR port ID\n"); 156 157 pr_ctrl = readq(fme_pr + FME_PR_CTRL); 158 pr_ctrl &= ~FME_PR_CTRL_PR_RGN_ID; 159 pr_ctrl |= FIELD_PREP(FME_PR_CTRL_PR_RGN_ID, info->region_id); 160 writeq(pr_ctrl, fme_pr + FME_PR_CTRL); 161 162 return 0; 163 } 164 165 static int fme_mgr_write(struct fpga_manager *mgr, 166 const char *buf, size_t count) 167 { 168 struct device *dev = &mgr->dev; 169 struct fme_mgr_priv *priv = mgr->priv; 170 void __iomem *fme_pr = priv->ioaddr; 171 u64 pr_ctrl, pr_status, pr_data; 172 int delay = 0, pr_credit, i = 0; 173 174 dev_dbg(dev, "start request\n"); 175 176 pr_ctrl = readq(fme_pr + FME_PR_CTRL); 177 pr_ctrl |= FME_PR_CTRL_PR_START; 178 writeq(pr_ctrl, fme_pr + FME_PR_CTRL); 179 180 dev_dbg(dev, "pushing data from bitstream to HW\n"); 181 182 /* 183 * driver can push data to PR hardware using PR_DATA register once HW 184 * has enough pr_credit (> 1), pr_credit reduces one for every 32bit 185 * pr data write to PR_DATA register. If pr_credit <= 1, driver needs 186 * to wait for enough pr_credit from hardware by polling. 187 */ 188 pr_status = readq(fme_pr + FME_PR_STS); 189 pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status); 190 191 while (count > 0) { 192 while (pr_credit <= 1) { 193 if (delay++ > PR_WAIT_TIMEOUT) { 194 dev_err(dev, "PR_CREDIT timeout\n"); 195 return -ETIMEDOUT; 196 } 197 udelay(1); 198 199 pr_status = readq(fme_pr + FME_PR_STS); 200 pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status); 201 } 202 203 if (count < 4) { 204 dev_err(dev, "Invalid PR bitstream size\n"); 205 return -EINVAL; 206 } 207 208 pr_data = 0; 209 pr_data |= FIELD_PREP(FME_PR_DATA_PR_DATA_RAW, 210 *(((u32 *)buf) + i)); 211 writeq(pr_data, fme_pr + FME_PR_DATA); 212 count -= 4; 213 pr_credit--; 214 i++; 215 } 216 217 return 0; 218 } 219 220 static int fme_mgr_write_complete(struct fpga_manager *mgr, 221 struct fpga_image_info *info) 222 { 223 struct device *dev = &mgr->dev; 224 struct fme_mgr_priv *priv = mgr->priv; 225 void __iomem *fme_pr = priv->ioaddr; 226 u64 pr_ctrl; 227 228 pr_ctrl = readq(fme_pr + FME_PR_CTRL); 229 pr_ctrl |= FME_PR_CTRL_PR_COMPLETE; 230 writeq(pr_ctrl, fme_pr + FME_PR_CTRL); 231 232 dev_dbg(dev, "green bitstream push complete\n"); 233 dev_dbg(dev, "waiting for HW to release PR resource\n"); 234 235 if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl, 236 !(pr_ctrl & FME_PR_CTRL_PR_START), 1, 237 PR_WAIT_TIMEOUT)) { 238 dev_err(dev, "PR Completion ACK timeout.\n"); 239 return -ETIMEDOUT; 240 } 241 242 dev_dbg(dev, "PR operation complete, checking status\n"); 243 priv->pr_error = fme_mgr_pr_error_handle(fme_pr); 244 if (priv->pr_error) { 245 dev_dbg(dev, "PR error detected %llx\n", 246 (unsigned long long)priv->pr_error); 247 return -EIO; 248 } 249 250 dev_dbg(dev, "PR done successfully\n"); 251 252 return 0; 253 } 254 255 static enum fpga_mgr_states fme_mgr_state(struct fpga_manager *mgr) 256 { 257 return FPGA_MGR_STATE_UNKNOWN; 258 } 259 260 static u64 fme_mgr_status(struct fpga_manager *mgr) 261 { 262 struct fme_mgr_priv *priv = mgr->priv; 263 264 return pr_error_to_mgr_status(priv->pr_error); 265 } 266 267 static const struct fpga_manager_ops fme_mgr_ops = { 268 .write_init = fme_mgr_write_init, 269 .write = fme_mgr_write, 270 .write_complete = fme_mgr_write_complete, 271 .state = fme_mgr_state, 272 .status = fme_mgr_status, 273 }; 274 275 static void fme_mgr_get_compat_id(void __iomem *fme_pr, 276 struct fpga_compat_id *id) 277 { 278 id->id_l = readq(fme_pr + FME_PR_INTFC_ID_L); 279 id->id_h = readq(fme_pr + FME_PR_INTFC_ID_H); 280 } 281 282 static int fme_mgr_probe(struct platform_device *pdev) 283 { 284 struct dfl_fme_mgr_pdata *pdata = dev_get_platdata(&pdev->dev); 285 struct fpga_compat_id *compat_id; 286 struct device *dev = &pdev->dev; 287 struct fme_mgr_priv *priv; 288 struct fpga_manager *mgr; 289 struct resource *res; 290 291 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 292 if (!priv) 293 return -ENOMEM; 294 295 if (pdata->ioaddr) 296 priv->ioaddr = pdata->ioaddr; 297 298 if (!priv->ioaddr) { 299 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 300 priv->ioaddr = devm_ioremap_resource(dev, res); 301 if (IS_ERR(priv->ioaddr)) 302 return PTR_ERR(priv->ioaddr); 303 } 304 305 compat_id = devm_kzalloc(dev, sizeof(*compat_id), GFP_KERNEL); 306 if (!compat_id) 307 return -ENOMEM; 308 309 fme_mgr_get_compat_id(priv->ioaddr, compat_id); 310 311 mgr = devm_fpga_mgr_create(dev, "DFL FME FPGA Manager", 312 &fme_mgr_ops, priv); 313 if (!mgr) 314 return -ENOMEM; 315 316 mgr->compat_id = compat_id; 317 318 return devm_fpga_mgr_register(dev, mgr); 319 } 320 321 static struct platform_driver fme_mgr_driver = { 322 .driver = { 323 .name = DFL_FPGA_FME_MGR, 324 }, 325 .probe = fme_mgr_probe, 326 }; 327 328 module_platform_driver(fme_mgr_driver); 329 330 MODULE_DESCRIPTION("FPGA Manager for DFL FPGA Management Engine"); 331 MODULE_AUTHOR("Intel Corporation"); 332 MODULE_LICENSE("GPL v2"); 333 MODULE_ALIAS("platform:dfl-fme-mgr"); 334