xref: /linux/drivers/firmware/samsung/exynos-acpm.c (revision d30c1683aaecb93d2ab95685dc4300a33d3cea7a)

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright 2020 Samsung Electronics Co., Ltd.
 * Copyright 2020 Google LLC.
 * Copyright 2024 Linaro Ltd.
 */

#include <linux/bitfield.h>
#include <linux/bitmap.h>
#include <linux/bits.h>
#include <linux/cleanup.h>
#include <linux/container_of.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firmware/samsung/exynos-acpm-protocol.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/ktime.h>
#include <linux/mailbox/exynos-message.h>
#include <linux/mailbox_client.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/math.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>

#include "exynos-acpm.h"
#include "exynos-acpm-dvfs.h"
#include "exynos-acpm-pmic.h"

#define ACPM_PROTOCOL_SEQNUM		GENMASK(21, 16)

#define ACPM_POLL_TIMEOUT_US		(100 * USEC_PER_MSEC)
#define ACPM_TX_TIMEOUT_US		500000

#define ACPM_GS101_INITDATA_BASE	0xa000

/**
 * struct acpm_shmem - shared memory configuration information.
 * @reserved:	unused fields.
 * @chans:	offset to array of struct acpm_chan_shmem.
 * @reserved1:	unused fields.
 * @num_chans:	number of channels.
 */
struct acpm_shmem {
	u32 reserved[2];
	u32 chans;
	u32 reserved1[3];
	u32 num_chans;
};

/**
 * struct acpm_chan_shmem - descriptor of a shared memory channel.
 *
 * @id:			channel ID.
 * @reserved:		unused fields.
 * @rx_rear:		rear pointer of APM RX queue (TX for AP).
 * @rx_front:		front pointer of APM RX queue (TX for AP).
 * @rx_base:		base address of APM RX queue (TX for AP).
 * @reserved1:		unused fields.
 * @tx_rear:		rear pointer of APM TX queue (RX for AP).
 * @tx_front:		front pointer of APM TX queue (RX for AP).
 * @tx_base:		base address of APM TX queue (RX for AP).
 * @qlen:		queue length. Applies to both TX/RX queues.
 * @mlen:		message length. Applies to both TX/RX queues.
 * @reserved2:		unused fields.
 * @poll_completion:	true when the channel works on polling.
 */
struct acpm_chan_shmem {
	u32 id;
	u32 reserved[3];
	u32 rx_rear;
	u32 rx_front;
	u32 rx_base;
	u32 reserved1[3];
	u32 tx_rear;
	u32 tx_front;
	u32 tx_base;
	u32 qlen;
	u32 mlen;
	u32 reserved2[2];
	u32 poll_completion;
};

/**
 * struct acpm_queue - exynos acpm queue.
 *
 * @rear:	rear address of the queue.
 * @front:	front address of the queue.
 * @base:	base address of the queue.
 */
struct acpm_queue {
	void __iomem *rear;
	void __iomem *front;
	void __iomem *base;
};

/**
 * struct acpm_rx_data - RX queue data.
 *
 * @cmd:	pointer to where the data shall be saved.
 * @n_cmd:	number of 32-bit commands.
 * @response:	true if the client expects the RX data.
 */
struct acpm_rx_data {
	u32 *cmd;
	size_t n_cmd;
	bool response;
};

#define ACPM_SEQNUM_MAX    64

/**
 * struct acpm_chan - driver internal representation of a channel.
 * @cl:		mailbox client.
 * @chan:	mailbox channel.
 * @acpm:	pointer to driver private data.
 * @tx:		TX queue. The enqueue is done by the host.
 *			- front index is written by the host.
 *			- rear index is written by the firmware.
 *
 * @rx:		RX queue. The enqueue is done by the firmware.
 *			- front index is written by the firmware.
 *			- rear index is written by the host.
 * @tx_lock:	protects TX queue.
 * @rx_lock:	protects RX queue.
 * @qlen:	queue length. Applies to both TX/RX queues.
 * @mlen:	message length. Applies to both TX/RX queues.
 * @seqnum:	sequence number of the last message enqueued on TX queue.
 * @id:		channel ID.
 * @poll_completion:	indicates if the transfer needs to be polled for
 *			completion or interrupt mode is used.
 * @bitmap_seqnum: bitmap that tracks the messages on the TX/RX queues.
 * @rx_data:	internal buffer used to drain the RX queue.
 */
struct acpm_chan {
	struct mbox_client cl;
	struct mbox_chan *chan;
	struct acpm_info *acpm;
	struct acpm_queue tx;
	struct acpm_queue rx;
	struct mutex tx_lock;
	struct mutex rx_lock;

	unsigned int qlen;
	unsigned int mlen;
	u8 seqnum;
	u8 id;
	bool poll_completion;

	DECLARE_BITMAP(bitmap_seqnum, ACPM_SEQNUM_MAX - 1);
	struct acpm_rx_data rx_data[ACPM_SEQNUM_MAX];
};

/**
 * struct acpm_info - driver's private data.
 * @shmem:	pointer to the SRAM configuration data.
 * @sram_base:	base address of SRAM.
 * @chans:	pointer to the ACPM channel parameters retrieved from SRAM.
 * @dev:	pointer to the exynos-acpm device.
 * @handle:	instance of acpm_handle to send to clients.
 * @num_chans:	number of channels available for this controller.
 */
struct acpm_info {
	struct acpm_shmem __iomem *shmem;
	void __iomem *sram_base;
	struct acpm_chan *chans;
	struct device *dev;
	struct acpm_handle handle;
	u32 num_chans;
};

/**
 * struct acpm_match_data - of_device_id data.
 * @initdata_base:	offset in SRAM where the channels configuration resides.
 * @acpm_clk_dev_name:	base name for the ACPM clocks device that we're registering.
 */
struct acpm_match_data {
	loff_t initdata_base;
	const char *acpm_clk_dev_name;
};

#define client_to_acpm_chan(c) container_of(c, struct acpm_chan, cl)
#define handle_to_acpm_info(h) container_of(h, struct acpm_info, handle)

/**
 * acpm_get_saved_rx() - get the response if it was already saved.
 * @achan:	ACPM channel info.
 * @xfer:	reference to the transfer to get response for.
 * @tx_seqnum:	xfer TX sequence number.
 */
static void acpm_get_saved_rx(struct acpm_chan *achan,
			      const struct acpm_xfer *xfer, u32 tx_seqnum)
{
	const struct acpm_rx_data *rx_data = &achan->rx_data[tx_seqnum - 1];
	u32 rx_seqnum;

	if (!rx_data->response)
		return;

	rx_seqnum = FIELD_GET(ACPM_PROTOCOL_SEQNUM, rx_data->cmd[0]);

	if (rx_seqnum == tx_seqnum) {
		memcpy(xfer->rxd, rx_data->cmd, xfer->rxlen);
		clear_bit(rx_seqnum - 1, achan->bitmap_seqnum);
	}
}

/**
 * acpm_get_rx() - get response from RX queue.
 * @achan:	ACPM channel info.
 * @xfer:	reference to the transfer to get response for.
 *
 * Return: 0 on success, -errno otherwise.
 */
static int acpm_get_rx(struct acpm_chan *achan, const struct acpm_xfer *xfer)
{
	u32 rx_front, rx_seqnum, tx_seqnum, seqnum;
	const void __iomem *base, *addr;
	struct acpm_rx_data *rx_data;
	u32 i, val, mlen;
	bool rx_set = false;

	guard(mutex)(&achan->rx_lock);

	rx_front = readl(achan->rx.front);
	i = readl(achan->rx.rear);

	tx_seqnum = FIELD_GET(ACPM_PROTOCOL_SEQNUM, xfer->txd[0]);

	if (i == rx_front) {
		acpm_get_saved_rx(achan, xfer, tx_seqnum);
		return 0;
	}

	base = achan->rx.base;
	mlen = achan->mlen;

	/* Drain RX queue. */
	do {
		/* Read RX seqnum. */
		addr = base + mlen * i;
		val = readl(addr);

		rx_seqnum = FIELD_GET(ACPM_PROTOCOL_SEQNUM, val);
		if (!rx_seqnum)
			return -EIO;
		/*
		 * mssg seqnum starts with value 1, whereas the driver considers
		 * the first mssg at index 0.
		 */
		seqnum = rx_seqnum - 1;
		rx_data = &achan->rx_data[seqnum];

		if (rx_data->response) {
			if (rx_seqnum == tx_seqnum) {
				__ioread32_copy(xfer->rxd, addr,
						xfer->rxlen / 4);
				rx_set = true;
				clear_bit(seqnum, achan->bitmap_seqnum);
			} else {
				/*
				 * The RX data corresponds to another request.
				 * Save the data to drain the queue, but don't
				 * clear yet the bitmap. It will be cleared
				 * after the response is copied to the request.
				 */
				__ioread32_copy(rx_data->cmd, addr,
						xfer->rxlen / 4);
			}
		} else {
			clear_bit(seqnum, achan->bitmap_seqnum);
		}

		i = (i + 1) % achan->qlen;
	} while (i != rx_front);

	/* We saved all responses, mark RX empty. */
	writel(rx_front, achan->rx.rear);

	/*
	 * If the response was not in this iteration of the queue, check if the
	 * RX data was previously saved.
	 */
	if (!rx_set)
		acpm_get_saved_rx(achan, xfer, tx_seqnum);

	return 0;
}

/**
 * acpm_dequeue_by_polling() - RX dequeue by polling.
 * @achan:	ACPM channel info.
 * @xfer:	reference to the transfer being waited for.
 *
 * Return: 0 on success, -errno otherwise.
 */
static int acpm_dequeue_by_polling(struct acpm_chan *achan,
				   const struct acpm_xfer *xfer)
{
	struct device *dev = achan->acpm->dev;
	ktime_t timeout;
	u32 seqnum;
	int ret;

	seqnum = FIELD_GET(ACPM_PROTOCOL_SEQNUM, xfer->txd[0]);

	timeout = ktime_add_us(ktime_get(), ACPM_POLL_TIMEOUT_US);
	do {
		ret = acpm_get_rx(achan, xfer);
		if (ret)
			return ret;

		if (!test_bit(seqnum - 1, achan->bitmap_seqnum))
			return 0;

		/* Determined experimentally. */
		udelay(20);
	} while (ktime_before(ktime_get(), timeout));

	dev_err(dev, "Timeout! ch:%u s:%u bitmap:%lx.\n",
		achan->id, seqnum, achan->bitmap_seqnum[0]);

	return -ETIME;
}

/**
 * acpm_wait_for_queue_slots() - wait for queue slots.
 *
 * @achan:		ACPM channel info.
 * @next_tx_front:	next front index of the TX queue.
 *
 * Return: 0 on success, -errno otherwise.
 */
static int acpm_wait_for_queue_slots(struct acpm_chan *achan, u32 next_tx_front)
{
	u32 val, ret;

	/*
	 * Wait for RX front to keep up with TX front. Make sure there's at
	 * least one element between them.
	 */
	ret = readl_poll_timeout(achan->rx.front, val, next_tx_front != val, 0,
				 ACPM_TX_TIMEOUT_US);
	if (ret) {
		dev_err(achan->acpm->dev, "RX front can not keep up with TX front.\n");
		return ret;
	}

	ret = readl_poll_timeout(achan->tx.rear, val, next_tx_front != val, 0,
				 ACPM_TX_TIMEOUT_US);
	if (ret)
		dev_err(achan->acpm->dev, "TX queue is full.\n");

	return ret;
}

/**
 * acpm_prepare_xfer() - prepare a transfer before writing the message to the
 * TX queue.
 * @achan:	ACPM channel info.
 * @xfer:	reference to the transfer being prepared.
 */
static void acpm_prepare_xfer(struct acpm_chan *achan,
			      const struct acpm_xfer *xfer)
{
	struct acpm_rx_data *rx_data;
	u32 *txd = (u32 *)xfer->txd;

	/* Prevent chan->seqnum from being re-used */
	do {
		if (++achan->seqnum == ACPM_SEQNUM_MAX)
			achan->seqnum = 1;
	} while (test_bit(achan->seqnum - 1, achan->bitmap_seqnum));

	txd[0] |= FIELD_PREP(ACPM_PROTOCOL_SEQNUM, achan->seqnum);

	/* Clear data for upcoming responses */
	rx_data = &achan->rx_data[achan->seqnum - 1];
	memset(rx_data->cmd, 0, sizeof(*rx_data->cmd) * rx_data->n_cmd);
	if (xfer->rxd)
		rx_data->response = true;

	/* Flag the index based on seqnum. (seqnum: 1~63, bitmap: 0~62) */
	set_bit(achan->seqnum - 1, achan->bitmap_seqnum);
}

/**
 * acpm_wait_for_message_response - an helper to group all possible ways of
 * waiting for a synchronous message response.
 *
 * @achan:	ACPM channel info.
 * @xfer:	reference to the transfer being waited for.
 *
 * Return: 0 on success, -errno otherwise.
 */
static int acpm_wait_for_message_response(struct acpm_chan *achan,
					  const struct acpm_xfer *xfer)
{
	/* Just polling mode supported for now. */
	return acpm_dequeue_by_polling(achan, xfer);
}

/**
 * acpm_do_xfer() - do one transfer.
 * @handle:	pointer to the acpm handle.
 * @xfer:	transfer to initiate and wait for response.
 *
 * Return: 0 on success, -errno otherwise.
 */
int acpm_do_xfer(const struct acpm_handle *handle, const struct acpm_xfer *xfer)
{
	struct acpm_info *acpm = handle_to_acpm_info(handle);
	struct exynos_mbox_msg msg;
	struct acpm_chan *achan;
	u32 idx, tx_front;
	int ret;

	if (xfer->acpm_chan_id >= acpm->num_chans)
		return -EINVAL;

	achan = &acpm->chans[xfer->acpm_chan_id];

	if (!xfer->txd || xfer->txlen > achan->mlen || xfer->rxlen > achan->mlen)
		return -EINVAL;

	if (!achan->poll_completion) {
		dev_err(achan->acpm->dev, "Interrupt mode not supported\n");
		return -EOPNOTSUPP;
	}

	msg.chan_id = xfer->acpm_chan_id;
	msg.chan_type = EXYNOS_MBOX_CHAN_TYPE_DOORBELL;

	scoped_guard(mutex, &achan->tx_lock) {
		tx_front = readl(achan->tx.front);
		idx = (tx_front + 1) % achan->qlen;

		ret = acpm_wait_for_queue_slots(achan, idx);
		if (ret)
			return ret;

		acpm_prepare_xfer(achan, xfer);

		/* Write TX command. */
		__iowrite32_copy(achan->tx.base + achan->mlen * tx_front,
				 xfer->txd, xfer->txlen / 4);

		/* Advance TX front. */
		writel(idx, achan->tx.front);

		ret = mbox_send_message(achan->chan, (void *)&msg);
		if (ret < 0)
			return ret;

		mbox_client_txdone(achan->chan, 0);
	}

	return acpm_wait_for_message_response(achan, xfer);
}

/**
 * acpm_chan_shmem_get_params() - get channel parameters and addresses of the
 * TX/RX queues.
 * @achan:	ACPM channel info.
 * @chan_shmem:	__iomem pointer to a channel described in shared memory.
 */
static void acpm_chan_shmem_get_params(struct acpm_chan *achan,
				struct acpm_chan_shmem __iomem *chan_shmem)
{
	void __iomem *base = achan->acpm->sram_base;
	struct acpm_queue *rx = &achan->rx;
	struct acpm_queue *tx = &achan->tx;

	achan->mlen = readl(&chan_shmem->mlen);
	achan->poll_completion = readl(&chan_shmem->poll_completion);
	achan->id = readl(&chan_shmem->id);
	achan->qlen = readl(&chan_shmem->qlen);

	tx->base = base + readl(&chan_shmem->rx_base);
	tx->rear = base + readl(&chan_shmem->rx_rear);
	tx->front = base + readl(&chan_shmem->rx_front);

	rx->base = base + readl(&chan_shmem->tx_base);
	rx->rear = base + readl(&chan_shmem->tx_rear);
	rx->front = base + readl(&chan_shmem->tx_front);

	dev_vdbg(achan->acpm->dev, "ID = %d poll = %d, mlen = %d, qlen = %d\n",
		 achan->id, achan->poll_completion, achan->mlen, achan->qlen);
}

/**
 * acpm_achan_alloc_cmds() - allocate buffers for retrieving data from the ACPM
 * firmware.
 * @achan:	ACPM channel info.
 *
 * Return: 0 on success, -errno otherwise.
 */
static int acpm_achan_alloc_cmds(struct acpm_chan *achan)
{
	struct device *dev = achan->acpm->dev;
	struct acpm_rx_data *rx_data;
	size_t cmd_size, n_cmd;
	int i;

	if (achan->mlen == 0)
		return 0;

	cmd_size = sizeof(*(achan->rx_data[0].cmd));
	n_cmd = DIV_ROUND_UP_ULL(achan->mlen, cmd_size);

	for (i = 0; i < ACPM_SEQNUM_MAX; i++) {
		rx_data = &achan->rx_data[i];
		rx_data->n_cmd = n_cmd;
		rx_data->cmd = devm_kcalloc(dev, n_cmd, cmd_size, GFP_KERNEL);
		if (!rx_data->cmd)
			return -ENOMEM;
	}

	return 0;
}

/**
 * acpm_free_mbox_chans() - free mailbox channels.
 * @acpm:	pointer to driver data.
 */
static void acpm_free_mbox_chans(struct acpm_info *acpm)
{
	int i;

	for (i = 0; i < acpm->num_chans; i++)
		if (!IS_ERR_OR_NULL(acpm->chans[i].chan))
			mbox_free_channel(acpm->chans[i].chan);
}

/**
 * acpm_channels_init() - initialize channels based on the configuration data in
 * the shared memory.
 * @acpm:	pointer to driver data.
 *
 * Return: 0 on success, -errno otherwise.
 */
static int acpm_channels_init(struct acpm_info *acpm)
{
	struct acpm_shmem __iomem *shmem = acpm->shmem;
	struct acpm_chan_shmem __iomem *chans_shmem;
	struct device *dev = acpm->dev;
	int i, ret;

	acpm->num_chans = readl(&shmem->num_chans);
	acpm->chans = devm_kcalloc(dev, acpm->num_chans, sizeof(*acpm->chans),
				   GFP_KERNEL);
	if (!acpm->chans)
		return -ENOMEM;

	chans_shmem = acpm->sram_base + readl(&shmem->chans);

	for (i = 0; i < acpm->num_chans; i++) {
		struct acpm_chan_shmem __iomem *chan_shmem = &chans_shmem[i];
		struct acpm_chan *achan = &acpm->chans[i];
		struct mbox_client *cl = &achan->cl;

		achan->acpm = acpm;

		acpm_chan_shmem_get_params(achan, chan_shmem);

		ret = acpm_achan_alloc_cmds(achan);
		if (ret)
			return ret;

		mutex_init(&achan->rx_lock);
		mutex_init(&achan->tx_lock);

		cl->dev = dev;

		achan->chan = mbox_request_channel(cl, 0);
		if (IS_ERR(achan->chan)) {
			acpm_free_mbox_chans(acpm);
			return PTR_ERR(achan->chan);
		}
	}

	return 0;
}

/**
 * acpm_setup_ops() - setup the operations structures.
 * @acpm:	pointer to the driver data.
 */
static void acpm_setup_ops(struct acpm_info *acpm)
{
	struct acpm_dvfs_ops *dvfs_ops = &acpm->handle.ops.dvfs_ops;
	struct acpm_pmic_ops *pmic_ops = &acpm->handle.ops.pmic_ops;

	dvfs_ops->set_rate = acpm_dvfs_set_rate;
	dvfs_ops->get_rate = acpm_dvfs_get_rate;

	pmic_ops->read_reg = acpm_pmic_read_reg;
	pmic_ops->bulk_read = acpm_pmic_bulk_read;
	pmic_ops->write_reg = acpm_pmic_write_reg;
	pmic_ops->bulk_write = acpm_pmic_bulk_write;
	pmic_ops->update_reg = acpm_pmic_update_reg;
}

static void acpm_clk_pdev_unregister(void *data)
{
	platform_device_unregister(data);
}

static int acpm_probe(struct platform_device *pdev)
{
	const struct acpm_match_data *match_data;
	struct platform_device *acpm_clk_pdev;
	struct device *dev = &pdev->dev;
	struct device_node *shmem;
	struct acpm_info *acpm;
	resource_size_t size;
	struct resource res;
	int ret;

	acpm = devm_kzalloc(dev, sizeof(*acpm), GFP_KERNEL);
	if (!acpm)
		return -ENOMEM;

	shmem = of_parse_phandle(dev->of_node, "shmem", 0);
	ret = of_address_to_resource(shmem, 0, &res);
	of_node_put(shmem);
	if (ret)
		return dev_err_probe(dev, ret,
				     "Failed to get shared memory.\n");

	size = resource_size(&res);
	acpm->sram_base = devm_ioremap(dev, res.start, size);
	if (!acpm->sram_base)
		return dev_err_probe(dev, -ENOMEM,
				     "Failed to ioremap shared memory.\n");

	match_data = of_device_get_match_data(dev);
	if (!match_data)
		return dev_err_probe(dev, -EINVAL,
				     "Failed to get match data.\n");

	acpm->shmem = acpm->sram_base + match_data->initdata_base;
	acpm->dev = dev;

	ret = acpm_channels_init(acpm);
	if (ret)
		return ret;

	acpm_setup_ops(acpm);

	platform_set_drvdata(pdev, acpm);

	acpm_clk_pdev = platform_device_register_data(dev,
						match_data->acpm_clk_dev_name,
						PLATFORM_DEVID_NONE, NULL, 0);
	if (IS_ERR(acpm_clk_pdev))
		return dev_err_probe(dev, PTR_ERR(acpm_clk_pdev),
				     "Failed to register ACPM clocks device.\n");

	ret = devm_add_action_or_reset(dev, acpm_clk_pdev_unregister,
				       acpm_clk_pdev);
	if (ret)
		return dev_err_probe(dev, ret, "Failed to add devm action.\n");

	return devm_of_platform_populate(dev);
}

/**
 * acpm_handle_put() - release the handle acquired by acpm_get_by_phandle.
 * @handle:	Handle acquired by acpm_get_by_phandle.
 */
static void acpm_handle_put(const struct acpm_handle *handle)
{
	struct acpm_info *acpm = handle_to_acpm_info(handle);
	struct device *dev = acpm->dev;

	module_put(dev->driver->owner);
	/* Drop reference taken with of_find_device_by_node(). */
	put_device(dev);
}

/**
 * devm_acpm_release() - devres release method.
 * @dev: pointer to device.
 * @res: pointer to resource.
 */
static void devm_acpm_release(struct device *dev, void *res)
{
	acpm_handle_put(*(struct acpm_handle **)res);
}

/**
 * acpm_get_by_node() - get the ACPM handle using node pointer.
 * @dev:	device pointer requesting ACPM handle.
 * @np:		ACPM device tree node.
 *
 * Return: pointer to handle on success, ERR_PTR(-errno) otherwise.
 */
static const struct acpm_handle *acpm_get_by_node(struct device *dev,
						  struct device_node *np)
{
	struct platform_device *pdev;
	struct device_link *link;
	struct acpm_info *acpm;

	pdev = of_find_device_by_node(np);
	if (!pdev)
		return ERR_PTR(-EPROBE_DEFER);

	acpm = platform_get_drvdata(pdev);
	if (!acpm) {
		platform_device_put(pdev);
		return ERR_PTR(-EPROBE_DEFER);
	}

	if (!try_module_get(pdev->dev.driver->owner)) {
		platform_device_put(pdev);
		return ERR_PTR(-EPROBE_DEFER);
	}

	link = device_link_add(dev, &pdev->dev, DL_FLAG_AUTOREMOVE_SUPPLIER);
	if (!link) {
		dev_err(&pdev->dev,
			"Failed to create device link to consumer %s.\n",
			dev_name(dev));
		platform_device_put(pdev);
		module_put(pdev->dev.driver->owner);
		return ERR_PTR(-EINVAL);
	}

	return &acpm->handle;
}

/**
 * devm_acpm_get_by_node() - managed get handle using node pointer.
 * @dev: device pointer requesting ACPM handle.
 * @np:  ACPM device tree node.
 *
 * Return: pointer to handle on success, ERR_PTR(-errno) otherwise.
 */
const struct acpm_handle *devm_acpm_get_by_node(struct device *dev,
						struct device_node *np)
{
	const struct acpm_handle **ptr, *handle;

	ptr = devres_alloc(devm_acpm_release, sizeof(*ptr), GFP_KERNEL);
	if (!ptr)
		return ERR_PTR(-ENOMEM);

	handle = acpm_get_by_node(dev, np);
	if (!IS_ERR(handle)) {
		*ptr = handle;
		devres_add(dev, ptr);
	} else {
		devres_free(ptr);
	}

	return handle;
}
EXPORT_SYMBOL_GPL(devm_acpm_get_by_node);

static const struct acpm_match_data acpm_gs101 = {
	.initdata_base = ACPM_GS101_INITDATA_BASE,
	.acpm_clk_dev_name = "gs101-acpm-clk",
};

static const struct of_device_id acpm_match[] = {
	{
		.compatible = "google,gs101-acpm-ipc",
		.data = &acpm_gs101,
	},
	{},
};
MODULE_DEVICE_TABLE(of, acpm_match);

static struct platform_driver acpm_driver = {
	.probe	= acpm_probe,
	.driver	= {
		.name = "exynos-acpm-protocol",
		.of_match_table	= acpm_match,
	},
};
module_platform_driver(acpm_driver);

MODULE_AUTHOR("Tudor Ambarus <tudor.ambarus@linaro.org>");
MODULE_DESCRIPTION("Samsung Exynos ACPM mailbox protocol driver");
MODULE_LICENSE("GPL");