1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright 2018 NXP 4 * Author: Dong Aisheng <aisheng.dong@nxp.com> 5 * 6 * Implementation of the SCU IPC functions using MUs (client side). 7 * 8 */ 9 10 #include <linux/err.h> 11 #include <linux/firmware/imx/ipc.h> 12 #include <linux/firmware/imx/sci.h> 13 #include <linux/interrupt.h> 14 #include <linux/irq.h> 15 #include <linux/kernel.h> 16 #include <linux/mailbox_client.h> 17 #include <linux/module.h> 18 #include <linux/mutex.h> 19 #include <linux/of_platform.h> 20 #include <linux/platform_device.h> 21 22 #define SCU_MU_CHAN_NUM 8 23 #define MAX_RX_TIMEOUT (msecs_to_jiffies(30)) 24 25 struct imx_sc_chan { 26 struct imx_sc_ipc *sc_ipc; 27 28 struct mbox_client cl; 29 struct mbox_chan *ch; 30 int idx; 31 struct completion tx_done; 32 }; 33 34 struct imx_sc_ipc { 35 /* SCU uses 4 Tx and 4 Rx channels */ 36 struct imx_sc_chan chans[SCU_MU_CHAN_NUM]; 37 struct device *dev; 38 struct mutex lock; 39 struct completion done; 40 bool fast_ipc; 41 42 /* temporarily store the SCU msg */ 43 u32 *msg; 44 u8 rx_size; 45 u8 count; 46 }; 47 48 /* 49 * This type is used to indicate error response for most functions. 50 */ 51 enum imx_sc_error_codes { 52 IMX_SC_ERR_NONE = 0, /* Success */ 53 IMX_SC_ERR_VERSION = 1, /* Incompatible API version */ 54 IMX_SC_ERR_CONFIG = 2, /* Configuration error */ 55 IMX_SC_ERR_PARM = 3, /* Bad parameter */ 56 IMX_SC_ERR_NOACCESS = 4, /* Permission error (no access) */ 57 IMX_SC_ERR_LOCKED = 5, /* Permission error (locked) */ 58 IMX_SC_ERR_UNAVAILABLE = 6, /* Unavailable (out of resources) */ 59 IMX_SC_ERR_NOTFOUND = 7, /* Not found */ 60 IMX_SC_ERR_NOPOWER = 8, /* No power */ 61 IMX_SC_ERR_IPC = 9, /* Generic IPC error */ 62 IMX_SC_ERR_BUSY = 10, /* Resource is currently busy/active */ 63 IMX_SC_ERR_FAIL = 11, /* General I/O failure */ 64 IMX_SC_ERR_LAST 65 }; 66 67 static int imx_sc_linux_errmap[IMX_SC_ERR_LAST] = { 68 0, /* IMX_SC_ERR_NONE */ 69 -EINVAL, /* IMX_SC_ERR_VERSION */ 70 -EINVAL, /* IMX_SC_ERR_CONFIG */ 71 -EINVAL, /* IMX_SC_ERR_PARM */ 72 -EACCES, /* IMX_SC_ERR_NOACCESS */ 73 -EACCES, /* IMX_SC_ERR_LOCKED */ 74 -ERANGE, /* IMX_SC_ERR_UNAVAILABLE */ 75 -EEXIST, /* IMX_SC_ERR_NOTFOUND */ 76 -EPERM, /* IMX_SC_ERR_NOPOWER */ 77 -EPIPE, /* IMX_SC_ERR_IPC */ 78 -EBUSY, /* IMX_SC_ERR_BUSY */ 79 -EIO, /* IMX_SC_ERR_FAIL */ 80 }; 81 82 static struct imx_sc_ipc *imx_sc_ipc_handle; 83 84 static inline int imx_sc_to_linux_errno(int errno) 85 { 86 if (errno >= IMX_SC_ERR_NONE && errno < IMX_SC_ERR_LAST) 87 return imx_sc_linux_errmap[errno]; 88 return -EIO; 89 } 90 91 /* 92 * Get the default handle used by SCU 93 */ 94 int imx_scu_get_handle(struct imx_sc_ipc **ipc) 95 { 96 if (!imx_sc_ipc_handle) 97 return -EPROBE_DEFER; 98 99 *ipc = imx_sc_ipc_handle; 100 return 0; 101 } 102 EXPORT_SYMBOL(imx_scu_get_handle); 103 104 /* Callback called when the word of a message is ack-ed, eg read by SCU */ 105 static void imx_scu_tx_done(struct mbox_client *cl, void *mssg, int r) 106 { 107 struct imx_sc_chan *sc_chan = container_of(cl, struct imx_sc_chan, cl); 108 109 complete(&sc_chan->tx_done); 110 } 111 112 static void imx_scu_rx_callback(struct mbox_client *c, void *msg) 113 { 114 struct imx_sc_chan *sc_chan = container_of(c, struct imx_sc_chan, cl); 115 struct imx_sc_ipc *sc_ipc = sc_chan->sc_ipc; 116 struct imx_sc_rpc_msg *hdr; 117 u32 *data = msg; 118 int i; 119 120 if (!sc_ipc->msg) { 121 dev_warn(sc_ipc->dev, "unexpected rx idx %d 0x%08x, ignore!\n", 122 sc_chan->idx, *data); 123 return; 124 } 125 126 if (sc_ipc->fast_ipc) { 127 hdr = msg; 128 sc_ipc->rx_size = hdr->size; 129 sc_ipc->msg[0] = *data++; 130 131 for (i = 1; i < sc_ipc->rx_size; i++) 132 sc_ipc->msg[i] = *data++; 133 134 complete(&sc_ipc->done); 135 136 return; 137 } 138 139 if (sc_chan->idx == 0) { 140 hdr = msg; 141 sc_ipc->rx_size = hdr->size; 142 dev_dbg(sc_ipc->dev, "msg rx size %u\n", sc_ipc->rx_size); 143 if (sc_ipc->rx_size > 4) 144 dev_warn(sc_ipc->dev, "RPC does not support receiving over 4 words: %u\n", 145 sc_ipc->rx_size); 146 } 147 148 sc_ipc->msg[sc_chan->idx] = *data; 149 sc_ipc->count++; 150 151 dev_dbg(sc_ipc->dev, "mu %u msg %u 0x%x\n", sc_chan->idx, 152 sc_ipc->count, *data); 153 154 if ((sc_ipc->rx_size != 0) && (sc_ipc->count == sc_ipc->rx_size)) 155 complete(&sc_ipc->done); 156 } 157 158 static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg) 159 { 160 struct imx_sc_rpc_msg hdr = *(struct imx_sc_rpc_msg *)msg; 161 struct imx_sc_chan *sc_chan; 162 u32 *data = msg; 163 int ret; 164 int size; 165 int i; 166 167 /* Check size */ 168 if (hdr.size > IMX_SC_RPC_MAX_MSG) 169 return -EINVAL; 170 171 dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr.svc, 172 hdr.func, hdr.size); 173 174 size = sc_ipc->fast_ipc ? 1 : hdr.size; 175 for (i = 0; i < size; i++) { 176 sc_chan = &sc_ipc->chans[i % 4]; 177 178 /* 179 * SCU requires that all messages words are written 180 * sequentially but linux MU driver implements multiple 181 * independent channels for each register so ordering between 182 * different channels must be ensured by SCU API interface. 183 * 184 * Wait for tx_done before every send to ensure that no 185 * queueing happens at the mailbox channel level. 186 */ 187 if (!sc_ipc->fast_ipc) { 188 wait_for_completion(&sc_chan->tx_done); 189 reinit_completion(&sc_chan->tx_done); 190 } 191 192 ret = mbox_send_message(sc_chan->ch, &data[i]); 193 if (ret < 0) 194 return ret; 195 } 196 197 return 0; 198 } 199 200 /* 201 * RPC command/response 202 */ 203 int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp) 204 { 205 uint8_t saved_svc, saved_func; 206 struct imx_sc_rpc_msg *hdr; 207 int ret; 208 209 if (WARN_ON(!sc_ipc || !msg)) 210 return -EINVAL; 211 212 mutex_lock(&sc_ipc->lock); 213 reinit_completion(&sc_ipc->done); 214 215 if (have_resp) { 216 sc_ipc->msg = msg; 217 saved_svc = ((struct imx_sc_rpc_msg *)msg)->svc; 218 saved_func = ((struct imx_sc_rpc_msg *)msg)->func; 219 } 220 sc_ipc->count = 0; 221 ret = imx_scu_ipc_write(sc_ipc, msg); 222 if (ret < 0) { 223 dev_err(sc_ipc->dev, "RPC send msg failed: %d\n", ret); 224 goto out; 225 } 226 227 if (have_resp) { 228 if (!wait_for_completion_timeout(&sc_ipc->done, 229 MAX_RX_TIMEOUT)) { 230 dev_err(sc_ipc->dev, "RPC send msg timeout\n"); 231 mutex_unlock(&sc_ipc->lock); 232 return -ETIMEDOUT; 233 } 234 235 /* response status is stored in hdr->func field */ 236 hdr = msg; 237 ret = hdr->func; 238 /* 239 * Some special SCU firmware APIs do NOT have return value 240 * in hdr->func, but they do have response data, those special 241 * APIs are defined as void function in SCU firmware, so they 242 * should be treated as return success always. 243 */ 244 if ((saved_svc == IMX_SC_RPC_SVC_MISC) && 245 (saved_func == IMX_SC_MISC_FUNC_UNIQUE_ID || 246 saved_func == IMX_SC_MISC_FUNC_GET_BUTTON_STATUS)) 247 ret = 0; 248 } 249 250 out: 251 sc_ipc->msg = NULL; 252 mutex_unlock(&sc_ipc->lock); 253 254 dev_dbg(sc_ipc->dev, "RPC SVC done\n"); 255 256 return imx_sc_to_linux_errno(ret); 257 } 258 EXPORT_SYMBOL(imx_scu_call_rpc); 259 260 static int imx_scu_probe(struct platform_device *pdev) 261 { 262 struct device *dev = &pdev->dev; 263 struct imx_sc_ipc *sc_ipc; 264 struct imx_sc_chan *sc_chan; 265 struct mbox_client *cl; 266 char *chan_name; 267 struct of_phandle_args args; 268 int num_channel; 269 int ret; 270 int i; 271 272 sc_ipc = devm_kzalloc(dev, sizeof(*sc_ipc), GFP_KERNEL); 273 if (!sc_ipc) 274 return -ENOMEM; 275 276 ret = of_parse_phandle_with_args(pdev->dev.of_node, "mboxes", 277 "#mbox-cells", 0, &args); 278 if (ret) 279 return ret; 280 281 sc_ipc->fast_ipc = of_device_is_compatible(args.np, "fsl,imx8-mu-scu"); 282 283 num_channel = sc_ipc->fast_ipc ? 2 : SCU_MU_CHAN_NUM; 284 for (i = 0; i < num_channel; i++) { 285 if (i < num_channel / 2) 286 chan_name = kasprintf(GFP_KERNEL, "tx%d", i); 287 else 288 chan_name = kasprintf(GFP_KERNEL, "rx%d", 289 i - num_channel / 2); 290 291 if (!chan_name) 292 return -ENOMEM; 293 294 sc_chan = &sc_ipc->chans[i]; 295 cl = &sc_chan->cl; 296 cl->dev = dev; 297 cl->tx_block = false; 298 cl->knows_txdone = true; 299 cl->rx_callback = imx_scu_rx_callback; 300 301 if (!sc_ipc->fast_ipc) { 302 /* Initial tx_done completion as "done" */ 303 cl->tx_done = imx_scu_tx_done; 304 init_completion(&sc_chan->tx_done); 305 complete(&sc_chan->tx_done); 306 } 307 308 sc_chan->sc_ipc = sc_ipc; 309 sc_chan->idx = i % (num_channel / 2); 310 sc_chan->ch = mbox_request_channel_byname(cl, chan_name); 311 if (IS_ERR(sc_chan->ch)) { 312 ret = PTR_ERR(sc_chan->ch); 313 if (ret != -EPROBE_DEFER) 314 dev_err(dev, "Failed to request mbox chan %s ret %d\n", 315 chan_name, ret); 316 kfree(chan_name); 317 return ret; 318 } 319 320 dev_dbg(dev, "request mbox chan %s\n", chan_name); 321 /* chan_name is not used anymore by framework */ 322 kfree(chan_name); 323 } 324 325 sc_ipc->dev = dev; 326 mutex_init(&sc_ipc->lock); 327 init_completion(&sc_ipc->done); 328 329 imx_sc_ipc_handle = sc_ipc; 330 331 ret = imx_scu_soc_init(dev); 332 if (ret) 333 dev_warn(dev, "failed to initialize SoC info: %d\n", ret); 334 335 ret = imx_scu_enable_general_irq_channel(dev); 336 if (ret) 337 dev_warn(dev, 338 "failed to enable general irq channel: %d\n", ret); 339 340 dev_info(dev, "NXP i.MX SCU Initialized\n"); 341 342 return devm_of_platform_populate(dev); 343 } 344 345 static const struct of_device_id imx_scu_match[] = { 346 { .compatible = "fsl,imx-scu", }, 347 { /* Sentinel */ } 348 }; 349 350 static struct platform_driver imx_scu_driver = { 351 .driver = { 352 .name = "imx-scu", 353 .of_match_table = imx_scu_match, 354 }, 355 .probe = imx_scu_probe, 356 }; 357 builtin_platform_driver(imx_scu_driver); 358 359 MODULE_AUTHOR("Dong Aisheng <aisheng.dong@nxp.com>"); 360 MODULE_DESCRIPTION("IMX SCU firmware protocol driver"); 361 MODULE_LICENSE("GPL v2"); 362