xref: /linux/drivers/firmware/efi/libstub/x86-5lvl.c (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 // SPDX-License-Identifier: GPL-2.0-only
2 #include <linux/efi.h>
3 
4 #include <asm/boot.h>
5 #include <asm/desc.h>
6 #include <asm/efi.h>
7 
8 #include "efistub.h"
9 #include "x86-stub.h"
10 
11 bool efi_no5lvl;
12 
13 static void (*la57_toggle)(void *cr3);
14 
15 static const struct desc_struct gdt[] = {
16 	[GDT_ENTRY_KERNEL32_CS] = GDT_ENTRY_INIT(DESC_CODE32, 0, 0xfffff),
17 	[GDT_ENTRY_KERNEL_CS]   = GDT_ENTRY_INIT(DESC_CODE64, 0, 0xfffff),
18 };
19 
20 /*
21  * Enabling (or disabling) 5 level paging is tricky, because it can only be
22  * done from 32-bit mode with paging disabled. This means not only that the
23  * code itself must be running from 32-bit addressable physical memory, but
24  * also that the root page table must be 32-bit addressable, as programming
25  * a 64-bit value into CR3 when running in 32-bit mode is not supported.
26  */
27 efi_status_t efi_setup_5level_paging(void)
28 {
29 	u8 tmpl_size = (u8 *)&trampoline_ljmp_imm_offset - (u8 *)&trampoline_32bit_src;
30 	efi_status_t status;
31 	u8 *la57_code;
32 
33 	if (!efi_is_64bit())
34 		return EFI_SUCCESS;
35 
36 	/* check for 5 level paging support */
37 	if (native_cpuid_eax(0) < 7 ||
38 	    !(native_cpuid_ecx(7) & (1 << (X86_FEATURE_LA57 & 31))))
39 		return EFI_SUCCESS;
40 
41 	/* allocate some 32-bit addressable memory for code and a page table */
42 	status = efi_allocate_pages(2 * PAGE_SIZE, (unsigned long *)&la57_code,
43 				    U32_MAX);
44 	if (status != EFI_SUCCESS)
45 		return status;
46 
47 	la57_toggle = memcpy(la57_code, trampoline_32bit_src, tmpl_size);
48 	memset(la57_code + tmpl_size, 0x90, PAGE_SIZE - tmpl_size);
49 
50 	/*
51 	 * To avoid the need to allocate a 32-bit addressable stack, the
52 	 * trampoline uses a LJMP instruction to switch back to long mode.
53 	 * LJMP takes an absolute destination address, which needs to be
54 	 * fixed up at runtime.
55 	 */
56 	*(u32 *)&la57_code[trampoline_ljmp_imm_offset] += (unsigned long)la57_code;
57 
58 	efi_adjust_memory_range_protection((unsigned long)la57_toggle, PAGE_SIZE);
59 
60 	return EFI_SUCCESS;
61 }
62 
63 void efi_5level_switch(void)
64 {
65 	bool want_la57 = IS_ENABLED(CONFIG_X86_5LEVEL) && !efi_no5lvl;
66 	bool have_la57 = native_read_cr4() & X86_CR4_LA57;
67 	bool need_toggle = want_la57 ^ have_la57;
68 	u64 *pgt = (void *)la57_toggle + PAGE_SIZE;
69 	u64 *cr3 = (u64 *)__native_read_cr3();
70 	u64 *new_cr3;
71 
72 	if (!la57_toggle || !need_toggle)
73 		return;
74 
75 	if (!have_la57) {
76 		/*
77 		 * 5 level paging will be enabled, so a root level page needs
78 		 * to be allocated from the 32-bit addressable physical region,
79 		 * with its first entry referring to the existing hierarchy.
80 		 */
81 		new_cr3 = memset(pgt, 0, PAGE_SIZE);
82 		new_cr3[0] = (u64)cr3 | _PAGE_TABLE_NOENC;
83 	} else {
84 		/* take the new root table pointer from the current entry #0 */
85 		new_cr3 = (u64 *)(cr3[0] & PAGE_MASK);
86 
87 		/* copy the new root table if it is not 32-bit addressable */
88 		if ((u64)new_cr3 > U32_MAX)
89 			new_cr3 = memcpy(pgt, new_cr3, PAGE_SIZE);
90 	}
91 
92 	native_load_gdt(&(struct desc_ptr){ sizeof(gdt) - 1, (u64)gdt });
93 
94 	la57_toggle(new_cr3);
95 }
96