1# SPDX-License-Identifier: GPL-2.0-only 2# 3# For a description of the syntax of this configuration file, 4# see Documentation/kbuild/kconfig-language.rst. 5# 6 7menu "Firmware Drivers" 8 9source "drivers/firmware/arm_scmi/Kconfig" 10 11config ARM_SCPI_PROTOCOL 12 tristate "ARM System Control and Power Interface (SCPI) Message Protocol" 13 depends on ARM || ARM64 || COMPILE_TEST 14 depends on MAILBOX 15 help 16 System Control and Power Interface (SCPI) Message Protocol is 17 defined for the purpose of communication between the Application 18 Cores(AP) and the System Control Processor(SCP). The MHU peripheral 19 provides a mechanism for inter-processor communication between SCP 20 and AP. 21 22 SCP controls most of the power management on the Application 23 Processors. It offers control and management of: the core/cluster 24 power states, various power domain DVFS including the core/cluster, 25 certain system clocks configuration, thermal sensors and many 26 others. 27 28 This protocol library provides interface for all the client drivers 29 making use of the features offered by the SCP. 30 31config ARM_SCPI_POWER_DOMAIN 32 tristate "SCPI power domain driver" 33 depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF) 34 default y 35 select PM_GENERIC_DOMAINS if PM 36 help 37 This enables support for the SCPI power domains which can be 38 enabled or disabled via the SCP firmware 39 40config ARM_SDE_INTERFACE 41 bool "ARM Software Delegated Exception Interface (SDEI)" 42 depends on ARM64 43 depends on ACPI_APEI_GHES 44 help 45 The Software Delegated Exception Interface (SDEI) is an ARM 46 standard for registering callbacks from the platform firmware 47 into the OS. This is typically used to implement RAS notifications. 48 49config EDD 50 tristate "BIOS Enhanced Disk Drive calls determine boot disk" 51 depends on X86 52 help 53 Say Y or M here if you want to enable BIOS Enhanced Disk Drive 54 Services real mode BIOS calls to determine which disk 55 BIOS tries boot from. This information is then exported via sysfs. 56 57 This option is experimental and is known to fail to boot on some 58 obscure configurations. Most disk controller BIOS vendors do 59 not yet implement this feature. 60 61config EDD_OFF 62 bool "Sets default behavior for EDD detection to off" 63 depends on EDD 64 default n 65 help 66 Say Y if you want EDD disabled by default, even though it is compiled into the 67 kernel. Say N if you want EDD enabled by default. EDD can be dynamically set 68 using the kernel parameter 'edd={on|skipmbr|off}'. 69 70config FIRMWARE_MEMMAP 71 bool "Add firmware-provided memory map to sysfs" if EXPERT 72 default X86 73 help 74 Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap. 75 That memory map is used for example by kexec to set up parameter area 76 for the next kernel, but can also be used for debugging purposes. 77 78 See also Documentation/ABI/testing/sysfs-firmware-memmap. 79 80config DMIID 81 bool "Export DMI identification via sysfs to userspace" 82 depends on DMI 83 default y 84 help 85 Say Y here if you want to query SMBIOS/DMI system identification 86 information from userspace through /sys/class/dmi/id/ or if you want 87 DMI-based module auto-loading. 88 89config DMI_SYSFS 90 tristate "DMI table support in sysfs" 91 depends on SYSFS && DMI 92 default n 93 help 94 Say Y or M here to enable the exporting of the raw DMI table 95 data via sysfs. This is useful for consuming the data without 96 requiring any access to /dev/mem at all. Tables are found 97 under /sys/firmware/dmi when this option is enabled and 98 loaded. 99 100config DMI_SCAN_MACHINE_NON_EFI_FALLBACK 101 bool 102 103config ISCSI_IBFT_FIND 104 bool "iSCSI Boot Firmware Table Attributes" 105 depends on X86 && ISCSI_IBFT 106 default n 107 help 108 This option enables the kernel to find the region of memory 109 in which the ISCSI Boot Firmware Table (iBFT) resides. This 110 is necessary for iSCSI Boot Firmware Table Attributes module to work 111 properly. 112 113config ISCSI_IBFT 114 tristate "iSCSI Boot Firmware Table Attributes module" 115 select ISCSI_BOOT_SYSFS 116 select ISCSI_IBFT_FIND if X86 117 depends on ACPI && SCSI && SCSI_LOWLEVEL 118 default n 119 help 120 This option enables support for detection and exposing of iSCSI 121 Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to 122 detect iSCSI boot parameters dynamically during system boot, say Y. 123 Otherwise, say N. 124 125config RASPBERRYPI_FIRMWARE 126 tristate "Raspberry Pi Firmware Driver" 127 depends on BCM2835_MBOX 128 help 129 This option enables support for communicating with the firmware on the 130 Raspberry Pi. 131 132config FW_CFG_SYSFS 133 tristate "QEMU fw_cfg device support in sysfs" 134 depends on SYSFS && (ARM || ARM64 || PARISC || PPC_PMAC || SPARC || X86) 135 depends on HAS_IOPORT_MAP 136 default n 137 help 138 Say Y or M here to enable the exporting of the QEMU firmware 139 configuration (fw_cfg) file entries via sysfs. Entries are 140 found under /sys/firmware/fw_cfg when this option is enabled 141 and loaded. 142 143config FW_CFG_SYSFS_CMDLINE 144 bool "QEMU fw_cfg device parameter parsing" 145 depends on FW_CFG_SYSFS 146 help 147 Allow the qemu_fw_cfg device to be initialized via the kernel 148 command line or using a module parameter. 149 WARNING: Using incorrect parameters (base address in particular) 150 may crash your system. 151 152config INTEL_STRATIX10_SERVICE 153 tristate "Intel Stratix10 Service Layer" 154 depends on ARCH_INTEL_SOCFPGA && ARM64 && HAVE_ARM_SMCCC 155 default n 156 help 157 Intel Stratix10 service layer runs at privileged exception level, 158 interfaces with the service providers (FPGA manager is one of them) 159 and manages secure monitor call to communicate with secure monitor 160 software at secure monitor exception level. 161 162 Say Y here if you want Stratix10 service layer support. 163 164config INTEL_STRATIX10_RSU 165 tristate "Intel Stratix10 Remote System Update" 166 depends on INTEL_STRATIX10_SERVICE 167 help 168 The Intel Remote System Update (RSU) driver exposes interfaces 169 access through the Intel Service Layer to user space via sysfs 170 device attribute nodes. The RSU interfaces report/control some of 171 the optional RSU features of the Stratix 10 SoC FPGA. 172 173 The RSU provides a way for customers to update the boot 174 configuration of a Stratix 10 SoC device with significantly reduced 175 risk of corrupting the bitstream storage and bricking the system. 176 177 Enable RSU support if you are using an Intel SoC FPGA with the RSU 178 feature enabled and you want Linux user space control. 179 180 Say Y here if you want Intel RSU support. 181 182config MTK_ADSP_IPC 183 tristate "MTK ADSP IPC Protocol driver" 184 depends on MTK_ADSP_MBOX 185 help 186 Say yes here to add support for the MediaTek ADSP IPC 187 between host AP (Linux) and the firmware running on ADSP. 188 ADSP exists on some mtk processors. 189 Client might use shared memory to exchange information with ADSP. 190 191config SYSFB 192 bool 193 select BOOT_VESA_SUPPORT 194 195config SYSFB_SIMPLEFB 196 bool "Mark VGA/VBE/EFI FB as generic system framebuffer" 197 depends on X86 || EFI 198 select SYSFB 199 help 200 Firmwares often provide initial graphics framebuffers so the BIOS, 201 bootloader or kernel can show basic video-output during boot for 202 user-guidance and debugging. Historically, x86 used the VESA BIOS 203 Extensions and EFI-framebuffers for this, which are mostly limited 204 to x86 BIOS or EFI systems. 205 This option, if enabled, marks VGA/VBE/EFI framebuffers as generic 206 framebuffers so the new generic system-framebuffer drivers can be 207 used instead. If the framebuffer is not compatible with the generic 208 modes, it is advertised as fallback platform framebuffer so legacy 209 drivers like efifb, vesafb and uvesafb can pick it up. 210 If this option is not selected, all system framebuffers are always 211 marked as fallback platform framebuffers as usual. 212 213 Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will 214 not be able to pick up generic system framebuffers if this option 215 is selected. You are highly encouraged to enable simplefb as 216 replacement if you select this option. simplefb can correctly deal 217 with generic system framebuffers. But you should still keep vesafb 218 and others enabled as fallback if a system framebuffer is 219 incompatible with simplefb. 220 221 If unsure, say Y. 222 223config TI_SCI_PROTOCOL 224 tristate "TI System Control Interface (TISCI) Message Protocol" 225 depends on TI_MESSAGE_MANAGER 226 help 227 TI System Control Interface (TISCI) Message Protocol is used to manage 228 compute systems such as ARM, DSP etc with the system controller in 229 complex System on Chip(SoC) such as those found on certain keystone 230 generation SoC from TI. 231 232 System controller provides various facilities including power 233 management function support. 234 235 This protocol library is used by client drivers to use the features 236 provided by the system controller. 237 238config TRUSTED_FOUNDATIONS 239 bool "Trusted Foundations secure monitor support" 240 depends on ARM && CPU_V7 241 help 242 Some devices (including most early Tegra-based consumer devices on 243 the market) are booted with the Trusted Foundations secure monitor 244 active, requiring some core operations to be performed by the secure 245 monitor instead of the kernel. 246 247 This option allows the kernel to invoke the secure monitor whenever 248 required on devices using Trusted Foundations. See the functions and 249 comments in linux/firmware/trusted_foundations.h or the device tree 250 bindings for "tlm,trusted-foundations" for details on how to use it. 251 252 Choose N if you don't know what this is about. 253 254config TURRIS_MOX_RWTM 255 tristate "Turris Mox rWTM secure firmware driver" 256 depends on ARCH_MVEBU || COMPILE_TEST 257 depends on HAS_DMA && OF 258 depends on MAILBOX 259 select HW_RANDOM 260 select ARMADA_37XX_RWTM_MBOX 261 help 262 This driver communicates with the firmware on the Cortex-M3 secure 263 processor of the Turris Mox router. Enable if you are building for 264 Turris Mox, and you will be able to read the device serial number and 265 other manufacturing data and also utilize the Entropy Bit Generator 266 for hardware random number generation. 267 268source "drivers/firmware/arm_ffa/Kconfig" 269source "drivers/firmware/broadcom/Kconfig" 270source "drivers/firmware/cirrus/Kconfig" 271source "drivers/firmware/google/Kconfig" 272source "drivers/firmware/efi/Kconfig" 273source "drivers/firmware/imx/Kconfig" 274source "drivers/firmware/meson/Kconfig" 275source "drivers/firmware/psci/Kconfig" 276source "drivers/firmware/qcom/Kconfig" 277source "drivers/firmware/smccc/Kconfig" 278source "drivers/firmware/tegra/Kconfig" 279source "drivers/firmware/xilinx/Kconfig" 280 281endmenu 282