1# SPDX-License-Identifier: GPL-2.0-only 2# 3# For a description of the syntax of this configuration file, 4# see Documentation/kbuild/kconfig-language.rst. 5# 6 7menu "Firmware Drivers" 8 9source "drivers/firmware/arm_scmi/Kconfig" 10 11config ARM_SCPI_PROTOCOL 12 tristate "ARM System Control and Power Interface (SCPI) Message Protocol" 13 depends on ARM || ARM64 || COMPILE_TEST 14 depends on MAILBOX 15 help 16 System Control and Power Interface (SCPI) Message Protocol is 17 defined for the purpose of communication between the Application 18 Cores(AP) and the System Control Processor(SCP). The MHU peripheral 19 provides a mechanism for inter-processor communication between SCP 20 and AP. 21 22 SCP controls most of the power management on the Application 23 Processors. It offers control and management of: the core/cluster 24 power states, various power domain DVFS including the core/cluster, 25 certain system clocks configuration, thermal sensors and many 26 others. 27 28 This protocol library provides interface for all the client drivers 29 making use of the features offered by the SCP. 30 31config ARM_SDE_INTERFACE 32 bool "ARM Software Delegated Exception Interface (SDEI)" 33 depends on ARM64 34 depends on ACPI_APEI_GHES 35 help 36 The Software Delegated Exception Interface (SDEI) is an ARM 37 standard for registering callbacks from the platform firmware 38 into the OS. This is typically used to implement RAS notifications. 39 40config EDD 41 tristate "BIOS Enhanced Disk Drive calls determine boot disk" 42 depends on X86 43 help 44 Say Y or M here if you want to enable BIOS Enhanced Disk Drive 45 Services real mode BIOS calls to determine which disk 46 BIOS tries boot from. This information is then exported via sysfs. 47 48 This option is experimental and is known to fail to boot on some 49 obscure configurations. Most disk controller BIOS vendors do 50 not yet implement this feature. 51 52config EDD_OFF 53 bool "Sets default behavior for EDD detection to off" 54 depends on EDD 55 default n 56 help 57 Say Y if you want EDD disabled by default, even though it is compiled into the 58 kernel. Say N if you want EDD enabled by default. EDD can be dynamically set 59 using the kernel parameter 'edd={on|skipmbr|off}'. 60 61config FIRMWARE_MEMMAP 62 bool "Add firmware-provided memory map to sysfs" if EXPERT 63 default X86 64 help 65 Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap. 66 That memory map is used for example by kexec to set up parameter area 67 for the next kernel, but can also be used for debugging purposes. 68 69 See also Documentation/ABI/testing/sysfs-firmware-memmap. 70 71config DMIID 72 bool "Export DMI identification via sysfs to userspace" 73 depends on DMI 74 default y 75 help 76 Say Y here if you want to query SMBIOS/DMI system identification 77 information from userspace through /sys/class/dmi/id/ or if you want 78 DMI-based module auto-loading. 79 80config DMI_SYSFS 81 tristate "DMI table support in sysfs" 82 depends on SYSFS && DMI 83 default n 84 help 85 Say Y or M here to enable the exporting of the raw DMI table 86 data via sysfs. This is useful for consuming the data without 87 requiring any access to /dev/mem at all. Tables are found 88 under /sys/firmware/dmi when this option is enabled and 89 loaded. 90 91config DMI_SCAN_MACHINE_NON_EFI_FALLBACK 92 bool 93 94config ISCSI_IBFT_FIND 95 bool "iSCSI Boot Firmware Table Attributes" 96 depends on X86 && ISCSI_IBFT 97 default n 98 help 99 This option enables the kernel to find the region of memory 100 in which the ISCSI Boot Firmware Table (iBFT) resides. This 101 is necessary for iSCSI Boot Firmware Table Attributes module to work 102 properly. 103 104config ISCSI_IBFT 105 tristate "iSCSI Boot Firmware Table Attributes module" 106 select ISCSI_BOOT_SYSFS 107 select ISCSI_IBFT_FIND if X86 108 depends on ACPI && SCSI && SCSI_LOWLEVEL 109 default n 110 help 111 This option enables support for detection and exposing of iSCSI 112 Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to 113 detect iSCSI boot parameters dynamically during system boot, say Y. 114 Otherwise, say N. 115 116config RASPBERRYPI_FIRMWARE 117 tristate "Raspberry Pi Firmware Driver" 118 depends on BCM2835_MBOX 119 help 120 This option enables support for communicating with the firmware on the 121 Raspberry Pi. 122 123config FW_CFG_SYSFS 124 tristate "QEMU fw_cfg device support in sysfs" 125 depends on SYSFS && (ARM || ARM64 || PARISC || PPC_PMAC || RISCV || SPARC || X86) 126 depends on HAS_IOPORT_MAP 127 default n 128 help 129 Say Y or M here to enable the exporting of the QEMU firmware 130 configuration (fw_cfg) file entries via sysfs. Entries are 131 found under /sys/firmware/fw_cfg when this option is enabled 132 and loaded. 133 134config FW_CFG_SYSFS_CMDLINE 135 bool "QEMU fw_cfg device parameter parsing" 136 depends on FW_CFG_SYSFS 137 help 138 Allow the qemu_fw_cfg device to be initialized via the kernel 139 command line or using a module parameter. 140 WARNING: Using incorrect parameters (base address in particular) 141 may crash your system. 142 143config INTEL_STRATIX10_SERVICE 144 tristate "Intel Stratix10 Service Layer" 145 depends on ARCH_INTEL_SOCFPGA && ARM64 && HAVE_ARM_SMCCC 146 default n 147 help 148 Intel Stratix10 service layer runs at privileged exception level, 149 interfaces with the service providers (FPGA manager is one of them) 150 and manages secure monitor call to communicate with secure monitor 151 software at secure monitor exception level. 152 153 Say Y here if you want Stratix10 service layer support. 154 155config INTEL_STRATIX10_RSU 156 tristate "Intel Stratix10 Remote System Update" 157 depends on INTEL_STRATIX10_SERVICE 158 help 159 The Intel Remote System Update (RSU) driver exposes interfaces 160 access through the Intel Service Layer to user space via sysfs 161 device attribute nodes. The RSU interfaces report/control some of 162 the optional RSU features of the Stratix 10 SoC FPGA. 163 164 The RSU provides a way for customers to update the boot 165 configuration of a Stratix 10 SoC device with significantly reduced 166 risk of corrupting the bitstream storage and bricking the system. 167 168 Enable RSU support if you are using an Intel SoC FPGA with the RSU 169 feature enabled and you want Linux user space control. 170 171 Say Y here if you want Intel RSU support. 172 173config MTK_ADSP_IPC 174 tristate "MTK ADSP IPC Protocol driver" 175 depends on MTK_ADSP_MBOX 176 help 177 Say yes here to add support for the MediaTek ADSP IPC 178 between host AP (Linux) and the firmware running on ADSP. 179 ADSP exists on some mtk processors. 180 Client might use shared memory to exchange information with ADSP. 181 182config SYSFB 183 bool 184 select BOOT_VESA_SUPPORT 185 186config SYSFB_SIMPLEFB 187 bool "Mark VGA/VBE/EFI FB as generic system framebuffer" 188 depends on X86 || EFI 189 select SYSFB 190 help 191 Firmwares often provide initial graphics framebuffers so the BIOS, 192 bootloader or kernel can show basic video-output during boot for 193 user-guidance and debugging. Historically, x86 used the VESA BIOS 194 Extensions and EFI-framebuffers for this, which are mostly limited 195 to x86 BIOS or EFI systems. 196 This option, if enabled, marks VGA/VBE/EFI framebuffers as generic 197 framebuffers so the new generic system-framebuffer drivers can be 198 used instead. If the framebuffer is not compatible with the generic 199 modes, it is advertised as fallback platform framebuffer so legacy 200 drivers like efifb, vesafb and uvesafb can pick it up. 201 If this option is not selected, all system framebuffers are always 202 marked as fallback platform framebuffers as usual. 203 204 Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will 205 not be able to pick up generic system framebuffers if this option 206 is selected. You are highly encouraged to enable simplefb as 207 replacement if you select this option. simplefb can correctly deal 208 with generic system framebuffers. But you should still keep vesafb 209 and others enabled as fallback if a system framebuffer is 210 incompatible with simplefb. 211 212 If unsure, say Y. 213 214config TI_SCI_PROTOCOL 215 tristate "TI System Control Interface (TISCI) Message Protocol" 216 depends on TI_MESSAGE_MANAGER 217 help 218 TI System Control Interface (TISCI) Message Protocol is used to manage 219 compute systems such as ARM, DSP etc with the system controller in 220 complex System on Chip(SoC) such as those found on certain keystone 221 generation SoC from TI. 222 223 System controller provides various facilities including power 224 management function support. 225 226 This protocol library is used by client drivers to use the features 227 provided by the system controller. 228 229config TRUSTED_FOUNDATIONS 230 bool "Trusted Foundations secure monitor support" 231 depends on ARM && CPU_V7 232 help 233 Some devices (including most early Tegra-based consumer devices on 234 the market) are booted with the Trusted Foundations secure monitor 235 active, requiring some core operations to be performed by the secure 236 monitor instead of the kernel. 237 238 This option allows the kernel to invoke the secure monitor whenever 239 required on devices using Trusted Foundations. See the functions and 240 comments in linux/firmware/trusted_foundations.h or the device tree 241 bindings for "tlm,trusted-foundations" for details on how to use it. 242 243 Choose N if you don't know what this is about. 244 245config TURRIS_MOX_RWTM 246 tristate "Turris Mox rWTM secure firmware driver" 247 depends on ARCH_MVEBU || COMPILE_TEST 248 depends on HAS_DMA && OF 249 depends on MAILBOX 250 select HW_RANDOM 251 select ARMADA_37XX_RWTM_MBOX 252 help 253 This driver communicates with the firmware on the Cortex-M3 secure 254 processor of the Turris Mox router. Enable if you are building for 255 Turris Mox, and you will be able to read the device serial number and 256 other manufacturing data and also utilize the Entropy Bit Generator 257 for hardware random number generation. 258 259source "drivers/firmware/arm_ffa/Kconfig" 260source "drivers/firmware/broadcom/Kconfig" 261source "drivers/firmware/cirrus/Kconfig" 262source "drivers/firmware/google/Kconfig" 263source "drivers/firmware/efi/Kconfig" 264source "drivers/firmware/imx/Kconfig" 265source "drivers/firmware/meson/Kconfig" 266source "drivers/firmware/microchip/Kconfig" 267source "drivers/firmware/psci/Kconfig" 268source "drivers/firmware/qcom/Kconfig" 269source "drivers/firmware/smccc/Kconfig" 270source "drivers/firmware/tegra/Kconfig" 271source "drivers/firmware/xilinx/Kconfig" 272 273endmenu 274