1menu "IEEE 1394 (FireWire) support" 2 depends on PCI || BROKEN 3 # firewire-core does not depend on PCI but is 4 # not useful without PCI controller driver 5 6config FIREWIRE 7 tristate "FireWire driver stack" 8 select CRC_ITU_T 9 help 10 This is the new-generation IEEE 1394 (FireWire) driver stack 11 a.k.a. Juju, a new implementation designed for robustness and 12 simplicity. 13 See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration 14 for information about migration from the older Linux 1394 stack 15 to the new driver stack. 16 17 To compile this driver as a module, say M here: the module will be 18 called firewire-core. 19 20config FIREWIRE_OHCI 21 tristate "OHCI-1394 controllers" 22 depends on PCI && FIREWIRE && MMU 23 help 24 Enable this driver if you have a FireWire controller based 25 on the OHCI specification. For all practical purposes, this 26 is the only chipset in use, so say Y here. 27 28 To compile this driver as a module, say M here: The module will be 29 called firewire-ohci. 30 31config FIREWIRE_SBP2 32 tristate "Storage devices (SBP-2 protocol)" 33 depends on FIREWIRE && SCSI 34 help 35 This option enables you to use SBP-2 devices connected to a 36 FireWire bus. SBP-2 devices include storage devices like 37 harddisks and DVD drives, also some other FireWire devices 38 like scanners. 39 40 To compile this driver as a module, say M here: The module will be 41 called firewire-sbp2. 42 43 You should also enable support for disks, CD-ROMs, etc. in the SCSI 44 configuration section. 45 46config FIREWIRE_NET 47 tristate "IP networking over 1394" 48 depends on FIREWIRE && INET 49 help 50 This enables IPv4 over IEEE 1394, providing IP connectivity with 51 other implementations of RFC 2734 as found on several operating 52 systems. Multicast support is currently limited. 53 54 To compile this driver as a module, say M here: The module will be 55 called firewire-net. 56 57config FIREWIRE_NOSY 58 tristate "Nosy - a FireWire traffic sniffer for PCILynx cards" 59 depends on PCI 60 help 61 Nosy is an IEEE 1394 packet sniffer that is used for protocol 62 analysis and in development of IEEE 1394 drivers, applications, 63 or firmwares. 64 65 This driver lets you use a Texas Instruments PCILynx 1394 to PCI 66 link layer controller TSB12LV21/A/B as a low-budget bus analyzer. 67 PCILynx is a nowadays very rare IEEE 1394 controller which is 68 not OHCI 1394 compliant. 69 70 The following cards are known to be based on PCILynx or PCILynx-2: 71 IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2 72 (PCI card), Newer Technology FireWire 2 Go (CardBus card), 73 Apple Power Mac G3 blue & white and G4 with PCI graphics 74 (onboard controller). 75 76 To compile this driver as a module, say M here: The module will be 77 called nosy. Source code of a userspace interface to nosy, called 78 nosy-dump, can be found in tools/firewire/ of the kernel sources. 79 80 If unsure, say N. 81 82endmenu 83