1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // extcon-ptn5150.c - PTN5150 CC logic extcon driver to support USB detection 4 // 5 // Based on extcon-sm5502.c driver 6 // Copyright (c) 2018-2019 by Vijai Kumar K 7 // Author: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com> 8 // Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org> 9 10 #include <linux/bitfield.h> 11 #include <linux/err.h> 12 #include <linux/i2c.h> 13 #include <linux/interrupt.h> 14 #include <linux/kernel.h> 15 #include <linux/module.h> 16 #include <linux/regmap.h> 17 #include <linux/slab.h> 18 #include <linux/extcon-provider.h> 19 #include <linux/gpio/consumer.h> 20 #include <linux/usb/role.h> 21 22 /* PTN5150 registers */ 23 #define PTN5150_REG_DEVICE_ID 0x01 24 #define PTN5150_REG_CONTROL 0x02 25 #define PTN5150_REG_INT_STATUS 0x03 26 #define PTN5150_REG_CC_STATUS 0x04 27 #define PTN5150_REG_CON_DET 0x09 28 #define PTN5150_REG_VCONN_STATUS 0x0a 29 #define PTN5150_REG_RESET 0x0b 30 #define PTN5150_REG_INT_MASK 0x18 31 #define PTN5150_REG_INT_REG_STATUS 0x19 32 #define PTN5150_REG_END PTN5150_REG_INT_REG_STATUS 33 34 #define PTN5150_DFP_ATTACHED 0x1 35 #define PTN5150_UFP_ATTACHED 0x2 36 37 /* Define PTN5150 MASK/SHIFT constant */ 38 #define PTN5150_REG_DEVICE_ID_VERSION GENMASK(7, 3) 39 #define PTN5150_REG_DEVICE_ID_VENDOR GENMASK(2, 0) 40 41 #define PTN5150_REG_CC_PORT_ATTACHMENT GENMASK(4, 2) 42 #define PTN5150_REG_CC_VBUS_DETECTION BIT(7) 43 #define PTN5150_REG_INT_CABLE_ATTACH_MASK BIT(0) 44 #define PTN5150_REG_INT_CABLE_DETACH_MASK BIT(1) 45 46 struct ptn5150_info { 47 struct device *dev; 48 struct extcon_dev *edev; 49 struct i2c_client *i2c; 50 struct regmap *regmap; 51 struct gpio_desc *int_gpiod; 52 struct gpio_desc *vbus_gpiod; 53 int irq; 54 struct work_struct irq_work; 55 struct mutex mutex; 56 struct usb_role_switch *role_sw; 57 }; 58 59 /* List of detectable cables */ 60 static const unsigned int ptn5150_extcon_cable[] = { 61 EXTCON_USB, 62 EXTCON_USB_HOST, 63 EXTCON_NONE, 64 }; 65 66 static const struct regmap_config ptn5150_regmap_config = { 67 .reg_bits = 8, 68 .val_bits = 8, 69 .max_register = PTN5150_REG_END, 70 }; 71 72 static void ptn5150_check_state(struct ptn5150_info *info) 73 { 74 unsigned int port_status, reg_data, vbus; 75 enum usb_role usb_role = USB_ROLE_NONE; 76 int ret; 77 78 ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, ®_data); 79 if (ret) { 80 dev_err(info->dev, "failed to read CC STATUS %d\n", ret); 81 return; 82 } 83 84 port_status = FIELD_GET(PTN5150_REG_CC_PORT_ATTACHMENT, reg_data); 85 86 switch (port_status) { 87 case PTN5150_DFP_ATTACHED: 88 extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false); 89 gpiod_set_value_cansleep(info->vbus_gpiod, 0); 90 extcon_set_state_sync(info->edev, EXTCON_USB, true); 91 usb_role = USB_ROLE_DEVICE; 92 break; 93 case PTN5150_UFP_ATTACHED: 94 extcon_set_state_sync(info->edev, EXTCON_USB, false); 95 vbus = FIELD_GET(PTN5150_REG_CC_VBUS_DETECTION, reg_data); 96 if (vbus) 97 gpiod_set_value_cansleep(info->vbus_gpiod, 0); 98 else 99 gpiod_set_value_cansleep(info->vbus_gpiod, 1); 100 101 extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true); 102 usb_role = USB_ROLE_HOST; 103 break; 104 default: 105 break; 106 } 107 108 if (usb_role) { 109 ret = usb_role_switch_set_role(info->role_sw, usb_role); 110 if (ret) 111 dev_err(info->dev, "failed to set %s role: %d\n", 112 usb_role_string(usb_role), ret); 113 } 114 } 115 116 static void ptn5150_irq_work(struct work_struct *work) 117 { 118 struct ptn5150_info *info = container_of(work, 119 struct ptn5150_info, irq_work); 120 int ret = 0; 121 unsigned int int_status; 122 123 if (!info->edev) 124 return; 125 126 mutex_lock(&info->mutex); 127 128 /* Clear interrupt. Read would clear the register */ 129 ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &int_status); 130 if (ret) { 131 dev_err(info->dev, "failed to read INT STATUS %d\n", ret); 132 mutex_unlock(&info->mutex); 133 return; 134 } 135 136 if (int_status) { 137 unsigned int cable_attach; 138 139 cable_attach = int_status & PTN5150_REG_INT_CABLE_ATTACH_MASK; 140 if (cable_attach) { 141 ptn5150_check_state(info); 142 } else { 143 extcon_set_state_sync(info->edev, 144 EXTCON_USB_HOST, false); 145 extcon_set_state_sync(info->edev, 146 EXTCON_USB, false); 147 gpiod_set_value_cansleep(info->vbus_gpiod, 0); 148 149 ret = usb_role_switch_set_role(info->role_sw, 150 USB_ROLE_NONE); 151 if (ret) 152 dev_err(info->dev, 153 "failed to set none role: %d\n", 154 ret); 155 } 156 } 157 158 /* Clear interrupt. Read would clear the register */ 159 ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS, 160 &int_status); 161 if (ret) { 162 dev_err(info->dev, 163 "failed to read INT REG STATUS %d\n", ret); 164 mutex_unlock(&info->mutex); 165 return; 166 } 167 168 mutex_unlock(&info->mutex); 169 } 170 171 172 static irqreturn_t ptn5150_irq_handler(int irq, void *data) 173 { 174 struct ptn5150_info *info = data; 175 176 schedule_work(&info->irq_work); 177 178 return IRQ_HANDLED; 179 } 180 181 static int ptn5150_init_dev_type(struct ptn5150_info *info) 182 { 183 unsigned int reg_data, vendor_id, version_id; 184 int ret; 185 186 ret = regmap_read(info->regmap, PTN5150_REG_DEVICE_ID, ®_data); 187 if (ret) { 188 dev_err(info->dev, "failed to read DEVICE_ID %d\n", ret); 189 return -EINVAL; 190 } 191 192 vendor_id = FIELD_GET(PTN5150_REG_DEVICE_ID_VENDOR, reg_data); 193 version_id = FIELD_GET(PTN5150_REG_DEVICE_ID_VERSION, reg_data); 194 dev_dbg(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n", 195 version_id, vendor_id); 196 197 /* Clear any existing interrupts */ 198 ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, ®_data); 199 if (ret) { 200 dev_err(info->dev, 201 "failed to read PTN5150_REG_INT_STATUS %d\n", 202 ret); 203 return -EINVAL; 204 } 205 206 ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS, ®_data); 207 if (ret) { 208 dev_err(info->dev, 209 "failed to read PTN5150_REG_INT_REG_STATUS %d\n", ret); 210 return -EINVAL; 211 } 212 213 return 0; 214 } 215 216 static void ptn5150_work_sync_and_put(void *data) 217 { 218 struct ptn5150_info *info = data; 219 220 cancel_work_sync(&info->irq_work); 221 usb_role_switch_put(info->role_sw); 222 } 223 224 static int ptn5150_i2c_probe(struct i2c_client *i2c) 225 { 226 struct device *dev = &i2c->dev; 227 struct device_node *np = i2c->dev.of_node; 228 struct ptn5150_info *info; 229 int ret; 230 231 if (!np) 232 return -EINVAL; 233 234 info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL); 235 if (!info) 236 return -ENOMEM; 237 i2c_set_clientdata(i2c, info); 238 239 info->dev = &i2c->dev; 240 info->i2c = i2c; 241 info->vbus_gpiod = devm_gpiod_get(&i2c->dev, "vbus", GPIOD_OUT_LOW); 242 if (IS_ERR(info->vbus_gpiod)) { 243 ret = PTR_ERR(info->vbus_gpiod); 244 if (ret == -ENOENT) { 245 dev_info(dev, "No VBUS GPIO, ignoring VBUS control\n"); 246 info->vbus_gpiod = NULL; 247 } else { 248 return dev_err_probe(dev, ret, "failed to get VBUS GPIO\n"); 249 } 250 } 251 252 mutex_init(&info->mutex); 253 254 INIT_WORK(&info->irq_work, ptn5150_irq_work); 255 256 info->regmap = devm_regmap_init_i2c(i2c, &ptn5150_regmap_config); 257 if (IS_ERR(info->regmap)) { 258 return dev_err_probe(info->dev, PTR_ERR(info->regmap), 259 "failed to allocate register map\n"); 260 } 261 262 if (i2c->irq > 0) { 263 info->irq = i2c->irq; 264 } else { 265 info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN); 266 if (IS_ERR(info->int_gpiod)) { 267 return dev_err_probe(dev, PTR_ERR(info->int_gpiod), 268 "failed to get INT GPIO\n"); 269 } 270 271 info->irq = gpiod_to_irq(info->int_gpiod); 272 if (info->irq < 0) { 273 dev_err(dev, "failed to get INTB IRQ\n"); 274 return info->irq; 275 } 276 } 277 278 ret = devm_request_threaded_irq(dev, info->irq, NULL, 279 ptn5150_irq_handler, 280 IRQF_TRIGGER_FALLING | 281 IRQF_ONESHOT, 282 i2c->name, info); 283 if (ret < 0) { 284 dev_err(dev, "failed to request handler for INTB IRQ\n"); 285 return ret; 286 } 287 288 /* Allocate extcon device */ 289 info->edev = devm_extcon_dev_allocate(info->dev, ptn5150_extcon_cable); 290 if (IS_ERR(info->edev)) { 291 dev_err(info->dev, "failed to allocate memory for extcon\n"); 292 return -ENOMEM; 293 } 294 295 /* Register extcon device */ 296 ret = devm_extcon_dev_register(info->dev, info->edev); 297 if (ret) { 298 dev_err(info->dev, "failed to register extcon device\n"); 299 return ret; 300 } 301 302 extcon_set_property_capability(info->edev, EXTCON_USB, 303 EXTCON_PROP_USB_VBUS); 304 extcon_set_property_capability(info->edev, EXTCON_USB_HOST, 305 EXTCON_PROP_USB_VBUS); 306 extcon_set_property_capability(info->edev, EXTCON_USB_HOST, 307 EXTCON_PROP_USB_TYPEC_POLARITY); 308 309 /* Initialize PTN5150 device and print vendor id and version id */ 310 ret = ptn5150_init_dev_type(info); 311 if (ret) 312 return -EINVAL; 313 314 info->role_sw = usb_role_switch_get(info->dev); 315 if (IS_ERR(info->role_sw)) 316 return dev_err_probe(info->dev, PTR_ERR(info->role_sw), 317 "failed to get role switch\n"); 318 319 ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info); 320 if (ret) 321 return ret; 322 323 /* 324 * Update current extcon state if for example OTG connection was there 325 * before the probe 326 */ 327 mutex_lock(&info->mutex); 328 ptn5150_check_state(info); 329 mutex_unlock(&info->mutex); 330 331 return 0; 332 } 333 334 static const struct of_device_id ptn5150_dt_match[] = { 335 { .compatible = "nxp,ptn5150" }, 336 { }, 337 }; 338 MODULE_DEVICE_TABLE(of, ptn5150_dt_match); 339 340 static const struct i2c_device_id ptn5150_i2c_id[] = { 341 { "ptn5150", 0 }, 342 { } 343 }; 344 MODULE_DEVICE_TABLE(i2c, ptn5150_i2c_id); 345 346 static struct i2c_driver ptn5150_i2c_driver = { 347 .driver = { 348 .name = "ptn5150", 349 .of_match_table = ptn5150_dt_match, 350 }, 351 .probe = ptn5150_i2c_probe, 352 .id_table = ptn5150_i2c_id, 353 }; 354 module_i2c_driver(ptn5150_i2c_driver); 355 356 MODULE_DESCRIPTION("NXP PTN5150 CC logic Extcon driver"); 357 MODULE_AUTHOR("Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>"); 358 MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>"); 359 MODULE_LICENSE("GPL v2"); 360