xref: /linux/drivers/edac/synopsys_edac.c (revision 2dc73b48665411a08c4e5f0f823dea8510761603)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Synopsys DDR ECC Driver
4  * This driver is based on ppc4xx_edac.c drivers
5  *
6  * Copyright (C) 2012 - 2014 Xilinx, Inc.
7  */
8 
9 #include <linux/edac.h>
10 #include <linux/module.h>
11 #include <linux/platform_device.h>
12 #include <linux/interrupt.h>
13 #include <linux/of.h>
14 #include <linux/of_device.h>
15 
16 #include "edac_module.h"
17 
18 /* Number of cs_rows needed per memory controller */
19 #define SYNPS_EDAC_NR_CSROWS		1
20 
21 /* Number of channels per memory controller */
22 #define SYNPS_EDAC_NR_CHANS		1
23 
24 /* Granularity of reported error in bytes */
25 #define SYNPS_EDAC_ERR_GRAIN		1
26 
27 #define SYNPS_EDAC_MSG_SIZE		256
28 
29 #define SYNPS_EDAC_MOD_STRING		"synps_edac"
30 #define SYNPS_EDAC_MOD_VER		"1"
31 
32 /* Synopsys DDR memory controller registers that are relevant to ECC */
33 #define CTRL_OFST			0x0
34 #define T_ZQ_OFST			0xA4
35 
36 /* ECC control register */
37 #define ECC_CTRL_OFST			0xC4
38 /* ECC log register */
39 #define CE_LOG_OFST			0xC8
40 /* ECC address register */
41 #define CE_ADDR_OFST			0xCC
42 /* ECC data[31:0] register */
43 #define CE_DATA_31_0_OFST		0xD0
44 
45 /* Uncorrectable error info registers */
46 #define UE_LOG_OFST			0xDC
47 #define UE_ADDR_OFST			0xE0
48 #define UE_DATA_31_0_OFST		0xE4
49 
50 #define STAT_OFST			0xF0
51 #define SCRUB_OFST			0xF4
52 
53 /* Control register bit field definitions */
54 #define CTRL_BW_MASK			0xC
55 #define CTRL_BW_SHIFT			2
56 
57 #define DDRCTL_WDTH_16			1
58 #define DDRCTL_WDTH_32			0
59 
60 /* ZQ register bit field definitions */
61 #define T_ZQ_DDRMODE_MASK		0x2
62 
63 /* ECC control register bit field definitions */
64 #define ECC_CTRL_CLR_CE_ERR		0x2
65 #define ECC_CTRL_CLR_UE_ERR		0x1
66 
67 /* ECC correctable/uncorrectable error log register definitions */
68 #define LOG_VALID			0x1
69 #define CE_LOG_BITPOS_MASK		0xFE
70 #define CE_LOG_BITPOS_SHIFT		1
71 
72 /* ECC correctable/uncorrectable error address register definitions */
73 #define ADDR_COL_MASK			0xFFF
74 #define ADDR_ROW_MASK			0xFFFF000
75 #define ADDR_ROW_SHIFT			12
76 #define ADDR_BANK_MASK			0x70000000
77 #define ADDR_BANK_SHIFT			28
78 
79 /* ECC statistic register definitions */
80 #define STAT_UECNT_MASK			0xFF
81 #define STAT_CECNT_MASK			0xFF00
82 #define STAT_CECNT_SHIFT		8
83 
84 /* ECC scrub register definitions */
85 #define SCRUB_MODE_MASK			0x7
86 #define SCRUB_MODE_SECDED		0x4
87 
88 /* DDR ECC Quirks */
89 #define DDR_ECC_INTR_SUPPORT		BIT(0)
90 #define DDR_ECC_DATA_POISON_SUPPORT	BIT(1)
91 #define DDR_ECC_INTR_SELF_CLEAR		BIT(2)
92 
93 /* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
94 /* ECC Configuration Registers */
95 #define ECC_CFG0_OFST			0x70
96 #define ECC_CFG1_OFST			0x74
97 
98 /* ECC Status Register */
99 #define ECC_STAT_OFST			0x78
100 
101 /* ECC Clear Register */
102 #define ECC_CLR_OFST			0x7C
103 
104 /* ECC Error count Register */
105 #define ECC_ERRCNT_OFST			0x80
106 
107 /* ECC Corrected Error Address Register */
108 #define ECC_CEADDR0_OFST		0x84
109 #define ECC_CEADDR1_OFST		0x88
110 
111 /* ECC Syndrome Registers */
112 #define ECC_CSYND0_OFST			0x8C
113 #define ECC_CSYND1_OFST			0x90
114 #define ECC_CSYND2_OFST			0x94
115 
116 /* ECC Bit Mask0 Address Register */
117 #define ECC_BITMASK0_OFST		0x98
118 #define ECC_BITMASK1_OFST		0x9C
119 #define ECC_BITMASK2_OFST		0xA0
120 
121 /* ECC UnCorrected Error Address Register */
122 #define ECC_UEADDR0_OFST		0xA4
123 #define ECC_UEADDR1_OFST		0xA8
124 
125 /* ECC Syndrome Registers */
126 #define ECC_UESYND0_OFST		0xAC
127 #define ECC_UESYND1_OFST		0xB0
128 #define ECC_UESYND2_OFST		0xB4
129 
130 /* ECC Poison Address Reg */
131 #define ECC_POISON0_OFST		0xB8
132 #define ECC_POISON1_OFST		0xBC
133 
134 #define ECC_ADDRMAP0_OFFSET		0x200
135 
136 /* Control register bitfield definitions */
137 #define ECC_CTRL_BUSWIDTH_MASK		0x3000
138 #define ECC_CTRL_BUSWIDTH_SHIFT		12
139 #define ECC_CTRL_CLR_CE_ERRCNT		BIT(2)
140 #define ECC_CTRL_CLR_UE_ERRCNT		BIT(3)
141 
142 /* DDR Control Register width definitions  */
143 #define DDRCTL_EWDTH_16			2
144 #define DDRCTL_EWDTH_32			1
145 #define DDRCTL_EWDTH_64			0
146 
147 /* ECC status register definitions */
148 #define ECC_STAT_UECNT_MASK		0xF0000
149 #define ECC_STAT_UECNT_SHIFT		16
150 #define ECC_STAT_CECNT_MASK		0xF00
151 #define ECC_STAT_CECNT_SHIFT		8
152 #define ECC_STAT_BITNUM_MASK		0x7F
153 
154 /* ECC error count register definitions */
155 #define ECC_ERRCNT_UECNT_MASK		0xFFFF0000
156 #define ECC_ERRCNT_UECNT_SHIFT		16
157 #define ECC_ERRCNT_CECNT_MASK		0xFFFF
158 
159 /* DDR QOS Interrupt register definitions */
160 #define DDR_QOS_IRQ_STAT_OFST		0x20200
161 #define DDR_QOSUE_MASK			0x4
162 #define	DDR_QOSCE_MASK			0x2
163 #define	ECC_CE_UE_INTR_MASK		0x6
164 #define DDR_QOS_IRQ_EN_OFST		0x20208
165 #define DDR_QOS_IRQ_DB_OFST		0x2020C
166 
167 /* DDR QOS Interrupt register definitions */
168 #define DDR_UE_MASK			BIT(9)
169 #define DDR_CE_MASK			BIT(8)
170 
171 /* ECC Corrected Error Register Mask and Shifts*/
172 #define ECC_CEADDR0_RW_MASK		0x3FFFF
173 #define ECC_CEADDR0_RNK_MASK		BIT(24)
174 #define ECC_CEADDR1_BNKGRP_MASK		0x3000000
175 #define ECC_CEADDR1_BNKNR_MASK		0x70000
176 #define ECC_CEADDR1_BLKNR_MASK		0xFFF
177 #define ECC_CEADDR1_BNKGRP_SHIFT	24
178 #define ECC_CEADDR1_BNKNR_SHIFT		16
179 
180 /* ECC Poison register shifts */
181 #define ECC_POISON0_RANK_SHIFT		24
182 #define ECC_POISON0_RANK_MASK		BIT(24)
183 #define ECC_POISON0_COLUMN_SHIFT	0
184 #define ECC_POISON0_COLUMN_MASK		0xFFF
185 #define ECC_POISON1_BG_SHIFT		28
186 #define ECC_POISON1_BG_MASK		0x30000000
187 #define ECC_POISON1_BANKNR_SHIFT	24
188 #define ECC_POISON1_BANKNR_MASK		0x7000000
189 #define ECC_POISON1_ROW_SHIFT		0
190 #define ECC_POISON1_ROW_MASK		0x3FFFF
191 
192 /* DDR Memory type defines */
193 #define MEM_TYPE_DDR3			0x1
194 #define MEM_TYPE_LPDDR3			0x8
195 #define MEM_TYPE_DDR2			0x4
196 #define MEM_TYPE_DDR4			0x10
197 #define MEM_TYPE_LPDDR4			0x20
198 
199 /* DDRC Software control register */
200 #define DDRC_SWCTL			0x320
201 
202 /* DDRC ECC CE & UE poison mask */
203 #define ECC_CEPOISON_MASK		0x3
204 #define ECC_UEPOISON_MASK		0x1
205 
206 /* DDRC Device config masks */
207 #define DDRC_MSTR_CFG_MASK		0xC0000000
208 #define DDRC_MSTR_CFG_SHIFT		30
209 #define DDRC_MSTR_CFG_X4_MASK		0x0
210 #define DDRC_MSTR_CFG_X8_MASK		0x1
211 #define DDRC_MSTR_CFG_X16_MASK		0x2
212 #define DDRC_MSTR_CFG_X32_MASK		0x3
213 
214 #define DDR_MAX_ROW_SHIFT		18
215 #define DDR_MAX_COL_SHIFT		14
216 #define DDR_MAX_BANK_SHIFT		3
217 #define DDR_MAX_BANKGRP_SHIFT		2
218 
219 #define ROW_MAX_VAL_MASK		0xF
220 #define COL_MAX_VAL_MASK		0xF
221 #define BANK_MAX_VAL_MASK		0x1F
222 #define BANKGRP_MAX_VAL_MASK		0x1F
223 #define RANK_MAX_VAL_MASK		0x1F
224 
225 #define ROW_B0_BASE			6
226 #define ROW_B1_BASE			7
227 #define ROW_B2_BASE			8
228 #define ROW_B3_BASE			9
229 #define ROW_B4_BASE			10
230 #define ROW_B5_BASE			11
231 #define ROW_B6_BASE			12
232 #define ROW_B7_BASE			13
233 #define ROW_B8_BASE			14
234 #define ROW_B9_BASE			15
235 #define ROW_B10_BASE			16
236 #define ROW_B11_BASE			17
237 #define ROW_B12_BASE			18
238 #define ROW_B13_BASE			19
239 #define ROW_B14_BASE			20
240 #define ROW_B15_BASE			21
241 #define ROW_B16_BASE			22
242 #define ROW_B17_BASE			23
243 
244 #define COL_B2_BASE			2
245 #define COL_B3_BASE			3
246 #define COL_B4_BASE			4
247 #define COL_B5_BASE			5
248 #define COL_B6_BASE			6
249 #define COL_B7_BASE			7
250 #define COL_B8_BASE			8
251 #define COL_B9_BASE			9
252 #define COL_B10_BASE			10
253 #define COL_B11_BASE			11
254 #define COL_B12_BASE			12
255 #define COL_B13_BASE			13
256 
257 #define BANK_B0_BASE			2
258 #define BANK_B1_BASE			3
259 #define BANK_B2_BASE			4
260 
261 #define BANKGRP_B0_BASE			2
262 #define BANKGRP_B1_BASE			3
263 
264 #define RANK_B0_BASE			6
265 
266 /**
267  * struct ecc_error_info - ECC error log information.
268  * @row:	Row number.
269  * @col:	Column number.
270  * @bank:	Bank number.
271  * @bitpos:	Bit position.
272  * @data:	Data causing the error.
273  * @bankgrpnr:	Bank group number.
274  * @blknr:	Block number.
275  */
276 struct ecc_error_info {
277 	u32 row;
278 	u32 col;
279 	u32 bank;
280 	u32 bitpos;
281 	u32 data;
282 	u32 bankgrpnr;
283 	u32 blknr;
284 };
285 
286 /**
287  * struct synps_ecc_status - ECC status information to report.
288  * @ce_cnt:	Correctable error count.
289  * @ue_cnt:	Uncorrectable error count.
290  * @ceinfo:	Correctable error log information.
291  * @ueinfo:	Uncorrectable error log information.
292  */
293 struct synps_ecc_status {
294 	u32 ce_cnt;
295 	u32 ue_cnt;
296 	struct ecc_error_info ceinfo;
297 	struct ecc_error_info ueinfo;
298 };
299 
300 /**
301  * struct synps_edac_priv - DDR memory controller private instance data.
302  * @baseaddr:		Base address of the DDR controller.
303  * @message:		Buffer for framing the event specific info.
304  * @stat:		ECC status information.
305  * @p_data:		Platform data.
306  * @ce_cnt:		Correctable Error count.
307  * @ue_cnt:		Uncorrectable Error count.
308  * @poison_addr:	Data poison address.
309  * @row_shift:		Bit shifts for row bit.
310  * @col_shift:		Bit shifts for column bit.
311  * @bank_shift:		Bit shifts for bank bit.
312  * @bankgrp_shift:	Bit shifts for bank group bit.
313  * @rank_shift:		Bit shifts for rank bit.
314  */
315 struct synps_edac_priv {
316 	void __iomem *baseaddr;
317 	char message[SYNPS_EDAC_MSG_SIZE];
318 	struct synps_ecc_status stat;
319 	const struct synps_platform_data *p_data;
320 	u32 ce_cnt;
321 	u32 ue_cnt;
322 #ifdef CONFIG_EDAC_DEBUG
323 	ulong poison_addr;
324 	u32 row_shift[18];
325 	u32 col_shift[14];
326 	u32 bank_shift[3];
327 	u32 bankgrp_shift[2];
328 	u32 rank_shift[1];
329 #endif
330 };
331 
332 /**
333  * struct synps_platform_data -  synps platform data structure.
334  * @get_error_info:	Get EDAC error info.
335  * @get_mtype:		Get mtype.
336  * @get_dtype:		Get dtype.
337  * @get_ecc_state:	Get ECC state.
338  * @quirks:		To differentiate IPs.
339  */
340 struct synps_platform_data {
341 	int (*get_error_info)(struct synps_edac_priv *priv);
342 	enum mem_type (*get_mtype)(const void __iomem *base);
343 	enum dev_type (*get_dtype)(const void __iomem *base);
344 	bool (*get_ecc_state)(void __iomem *base);
345 	int quirks;
346 };
347 
348 /**
349  * zynq_get_error_info - Get the current ECC error info.
350  * @priv:	DDR memory controller private instance data.
351  *
352  * Return: one if there is no error, otherwise zero.
353  */
354 static int zynq_get_error_info(struct synps_edac_priv *priv)
355 {
356 	struct synps_ecc_status *p;
357 	u32 regval, clearval = 0;
358 	void __iomem *base;
359 
360 	base = priv->baseaddr;
361 	p = &priv->stat;
362 
363 	regval = readl(base + STAT_OFST);
364 	if (!regval)
365 		return 1;
366 
367 	p->ce_cnt = (regval & STAT_CECNT_MASK) >> STAT_CECNT_SHIFT;
368 	p->ue_cnt = regval & STAT_UECNT_MASK;
369 
370 	regval = readl(base + CE_LOG_OFST);
371 	if (!(p->ce_cnt && (regval & LOG_VALID)))
372 		goto ue_err;
373 
374 	p->ceinfo.bitpos = (regval & CE_LOG_BITPOS_MASK) >> CE_LOG_BITPOS_SHIFT;
375 	regval = readl(base + CE_ADDR_OFST);
376 	p->ceinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
377 	p->ceinfo.col = regval & ADDR_COL_MASK;
378 	p->ceinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
379 	p->ceinfo.data = readl(base + CE_DATA_31_0_OFST);
380 	edac_dbg(3, "CE bit position: %d data: %d\n", p->ceinfo.bitpos,
381 		 p->ceinfo.data);
382 	clearval = ECC_CTRL_CLR_CE_ERR;
383 
384 ue_err:
385 	regval = readl(base + UE_LOG_OFST);
386 	if (!(p->ue_cnt && (regval & LOG_VALID)))
387 		goto out;
388 
389 	regval = readl(base + UE_ADDR_OFST);
390 	p->ueinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
391 	p->ueinfo.col = regval & ADDR_COL_MASK;
392 	p->ueinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
393 	p->ueinfo.data = readl(base + UE_DATA_31_0_OFST);
394 	clearval |= ECC_CTRL_CLR_UE_ERR;
395 
396 out:
397 	writel(clearval, base + ECC_CTRL_OFST);
398 	writel(0x0, base + ECC_CTRL_OFST);
399 
400 	return 0;
401 }
402 
403 /**
404  * zynqmp_get_error_info - Get the current ECC error info.
405  * @priv:	DDR memory controller private instance data.
406  *
407  * Return: one if there is no error otherwise returns zero.
408  */
409 static int zynqmp_get_error_info(struct synps_edac_priv *priv)
410 {
411 	struct synps_ecc_status *p;
412 	u32 regval, clearval = 0;
413 	void __iomem *base;
414 
415 	base = priv->baseaddr;
416 	p = &priv->stat;
417 
418 	regval = readl(base + ECC_ERRCNT_OFST);
419 	p->ce_cnt = regval & ECC_ERRCNT_CECNT_MASK;
420 	p->ue_cnt = (regval & ECC_ERRCNT_UECNT_MASK) >> ECC_ERRCNT_UECNT_SHIFT;
421 	if (!p->ce_cnt)
422 		goto ue_err;
423 
424 	regval = readl(base + ECC_STAT_OFST);
425 	if (!regval)
426 		return 1;
427 
428 	p->ceinfo.bitpos = (regval & ECC_STAT_BITNUM_MASK);
429 
430 	regval = readl(base + ECC_CEADDR0_OFST);
431 	p->ceinfo.row = (regval & ECC_CEADDR0_RW_MASK);
432 	regval = readl(base + ECC_CEADDR1_OFST);
433 	p->ceinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
434 					ECC_CEADDR1_BNKNR_SHIFT;
435 	p->ceinfo.bankgrpnr = (regval &	ECC_CEADDR1_BNKGRP_MASK) >>
436 					ECC_CEADDR1_BNKGRP_SHIFT;
437 	p->ceinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
438 	p->ceinfo.data = readl(base + ECC_CSYND0_OFST);
439 	edac_dbg(2, "ECCCSYN0: 0x%08X ECCCSYN1: 0x%08X ECCCSYN2: 0x%08X\n",
440 		 readl(base + ECC_CSYND0_OFST), readl(base + ECC_CSYND1_OFST),
441 		 readl(base + ECC_CSYND2_OFST));
442 ue_err:
443 	if (!p->ue_cnt)
444 		goto out;
445 
446 	regval = readl(base + ECC_UEADDR0_OFST);
447 	p->ueinfo.row = (regval & ECC_CEADDR0_RW_MASK);
448 	regval = readl(base + ECC_UEADDR1_OFST);
449 	p->ueinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
450 					ECC_CEADDR1_BNKGRP_SHIFT;
451 	p->ueinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
452 					ECC_CEADDR1_BNKNR_SHIFT;
453 	p->ueinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
454 	p->ueinfo.data = readl(base + ECC_UESYND0_OFST);
455 out:
456 	clearval = ECC_CTRL_CLR_CE_ERR | ECC_CTRL_CLR_CE_ERRCNT;
457 	clearval |= ECC_CTRL_CLR_UE_ERR | ECC_CTRL_CLR_UE_ERRCNT;
458 	writel(clearval, base + ECC_CLR_OFST);
459 	writel(0x0, base + ECC_CLR_OFST);
460 
461 	return 0;
462 }
463 
464 /**
465  * handle_error - Handle Correctable and Uncorrectable errors.
466  * @mci:	EDAC memory controller instance.
467  * @p:		Synopsys ECC status structure.
468  *
469  * Handles ECC correctable and uncorrectable errors.
470  */
471 static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
472 {
473 	struct synps_edac_priv *priv = mci->pvt_info;
474 	struct ecc_error_info *pinf;
475 
476 	if (p->ce_cnt) {
477 		pinf = &p->ceinfo;
478 		if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
479 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
480 				 "DDR ECC error type:%s Row %d Bank %d BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x",
481 				 "CE", pinf->row, pinf->bank,
482 				 pinf->bankgrpnr, pinf->blknr,
483 				 pinf->bitpos, pinf->data);
484 		} else {
485 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
486 				 "DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x",
487 				 "CE", pinf->row, pinf->bank, pinf->col,
488 				 pinf->bitpos, pinf->data);
489 		}
490 
491 		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
492 				     p->ce_cnt, 0, 0, 0, 0, 0, -1,
493 				     priv->message, "");
494 	}
495 
496 	if (p->ue_cnt) {
497 		pinf = &p->ueinfo;
498 		if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
499 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
500 				 "DDR ECC error type :%s Row %d Bank %d BankGroup Number %d Block Number %d",
501 				 "UE", pinf->row, pinf->bank,
502 				 pinf->bankgrpnr, pinf->blknr);
503 		} else {
504 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
505 				 "DDR ECC error type :%s Row %d Bank %d Col %d ",
506 				 "UE", pinf->row, pinf->bank, pinf->col);
507 		}
508 
509 		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
510 				     p->ue_cnt, 0, 0, 0, 0, 0, -1,
511 				     priv->message, "");
512 	}
513 
514 	memset(p, 0, sizeof(*p));
515 }
516 
517 static void enable_intr(struct synps_edac_priv *priv)
518 {
519 	/* Enable UE/CE Interrupts */
520 	if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
521 		writel(DDR_UE_MASK | DDR_CE_MASK,
522 		       priv->baseaddr + ECC_CLR_OFST);
523 	else
524 		writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
525 		       priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
526 
527 }
528 
529 static void disable_intr(struct synps_edac_priv *priv)
530 {
531 	/* Disable UE/CE Interrupts */
532 	if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
533 		writel(0x0, priv->baseaddr + ECC_CLR_OFST);
534 	else
535 		writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
536 		       priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
537 }
538 
539 /**
540  * intr_handler - Interrupt Handler for ECC interrupts.
541  * @irq:        IRQ number.
542  * @dev_id:     Device ID.
543  *
544  * Return: IRQ_NONE, if interrupt not set or IRQ_HANDLED otherwise.
545  */
546 static irqreturn_t intr_handler(int irq, void *dev_id)
547 {
548 	const struct synps_platform_data *p_data;
549 	struct mem_ctl_info *mci = dev_id;
550 	struct synps_edac_priv *priv;
551 	int status, regval;
552 
553 	priv = mci->pvt_info;
554 	p_data = priv->p_data;
555 
556 	/*
557 	 * v3.0 of the controller has the ce/ue bits cleared automatically,
558 	 * so this condition does not apply.
559 	 */
560 	if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) {
561 		regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
562 		regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
563 		if (!(regval & ECC_CE_UE_INTR_MASK))
564 			return IRQ_NONE;
565 	}
566 
567 	status = p_data->get_error_info(priv);
568 	if (status)
569 		return IRQ_NONE;
570 
571 	priv->ce_cnt += priv->stat.ce_cnt;
572 	priv->ue_cnt += priv->stat.ue_cnt;
573 	handle_error(mci, &priv->stat);
574 
575 	edac_dbg(3, "Total error count CE %d UE %d\n",
576 		 priv->ce_cnt, priv->ue_cnt);
577 	/* v3.0 of the controller does not have this register */
578 	if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR))
579 		writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
580 	else
581 		enable_intr(priv);
582 
583 	return IRQ_HANDLED;
584 }
585 
586 /**
587  * check_errors - Check controller for ECC errors.
588  * @mci:	EDAC memory controller instance.
589  *
590  * Check and post ECC errors. Called by the polling thread.
591  */
592 static void check_errors(struct mem_ctl_info *mci)
593 {
594 	const struct synps_platform_data *p_data;
595 	struct synps_edac_priv *priv;
596 	int status;
597 
598 	priv = mci->pvt_info;
599 	p_data = priv->p_data;
600 
601 	status = p_data->get_error_info(priv);
602 	if (status)
603 		return;
604 
605 	priv->ce_cnt += priv->stat.ce_cnt;
606 	priv->ue_cnt += priv->stat.ue_cnt;
607 	handle_error(mci, &priv->stat);
608 
609 	edac_dbg(3, "Total error count CE %d UE %d\n",
610 		 priv->ce_cnt, priv->ue_cnt);
611 }
612 
613 /**
614  * zynq_get_dtype - Return the controller memory width.
615  * @base:	DDR memory controller base address.
616  *
617  * Get the EDAC device type width appropriate for the current controller
618  * configuration.
619  *
620  * Return: a device type width enumeration.
621  */
622 static enum dev_type zynq_get_dtype(const void __iomem *base)
623 {
624 	enum dev_type dt;
625 	u32 width;
626 
627 	width = readl(base + CTRL_OFST);
628 	width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT;
629 
630 	switch (width) {
631 	case DDRCTL_WDTH_16:
632 		dt = DEV_X2;
633 		break;
634 	case DDRCTL_WDTH_32:
635 		dt = DEV_X4;
636 		break;
637 	default:
638 		dt = DEV_UNKNOWN;
639 	}
640 
641 	return dt;
642 }
643 
644 /**
645  * zynqmp_get_dtype - Return the controller memory width.
646  * @base:	DDR memory controller base address.
647  *
648  * Get the EDAC device type width appropriate for the current controller
649  * configuration.
650  *
651  * Return: a device type width enumeration.
652  */
653 static enum dev_type zynqmp_get_dtype(const void __iomem *base)
654 {
655 	enum dev_type dt;
656 	u32 width;
657 
658 	width = readl(base + CTRL_OFST);
659 	width = (width & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT;
660 	switch (width) {
661 	case DDRCTL_EWDTH_16:
662 		dt = DEV_X2;
663 		break;
664 	case DDRCTL_EWDTH_32:
665 		dt = DEV_X4;
666 		break;
667 	case DDRCTL_EWDTH_64:
668 		dt = DEV_X8;
669 		break;
670 	default:
671 		dt = DEV_UNKNOWN;
672 	}
673 
674 	return dt;
675 }
676 
677 /**
678  * zynq_get_ecc_state - Return the controller ECC enable/disable status.
679  * @base:	DDR memory controller base address.
680  *
681  * Get the ECC enable/disable status of the controller.
682  *
683  * Return: true if enabled, otherwise false.
684  */
685 static bool zynq_get_ecc_state(void __iomem *base)
686 {
687 	enum dev_type dt;
688 	u32 ecctype;
689 
690 	dt = zynq_get_dtype(base);
691 	if (dt == DEV_UNKNOWN)
692 		return false;
693 
694 	ecctype = readl(base + SCRUB_OFST) & SCRUB_MODE_MASK;
695 	if ((ecctype == SCRUB_MODE_SECDED) && (dt == DEV_X2))
696 		return true;
697 
698 	return false;
699 }
700 
701 /**
702  * zynqmp_get_ecc_state - Return the controller ECC enable/disable status.
703  * @base:	DDR memory controller base address.
704  *
705  * Get the ECC enable/disable status for the controller.
706  *
707  * Return: a ECC status boolean i.e true/false - enabled/disabled.
708  */
709 static bool zynqmp_get_ecc_state(void __iomem *base)
710 {
711 	enum dev_type dt;
712 	u32 ecctype;
713 
714 	dt = zynqmp_get_dtype(base);
715 	if (dt == DEV_UNKNOWN)
716 		return false;
717 
718 	ecctype = readl(base + ECC_CFG0_OFST) & SCRUB_MODE_MASK;
719 	if ((ecctype == SCRUB_MODE_SECDED) &&
720 	    ((dt == DEV_X2) || (dt == DEV_X4) || (dt == DEV_X8)))
721 		return true;
722 
723 	return false;
724 }
725 
726 /**
727  * get_memsize - Read the size of the attached memory device.
728  *
729  * Return: the memory size in bytes.
730  */
731 static u32 get_memsize(void)
732 {
733 	struct sysinfo inf;
734 
735 	si_meminfo(&inf);
736 
737 	return inf.totalram * inf.mem_unit;
738 }
739 
740 /**
741  * zynq_get_mtype - Return the controller memory type.
742  * @base:	Synopsys ECC status structure.
743  *
744  * Get the EDAC memory type appropriate for the current controller
745  * configuration.
746  *
747  * Return: a memory type enumeration.
748  */
749 static enum mem_type zynq_get_mtype(const void __iomem *base)
750 {
751 	enum mem_type mt;
752 	u32 memtype;
753 
754 	memtype = readl(base + T_ZQ_OFST);
755 
756 	if (memtype & T_ZQ_DDRMODE_MASK)
757 		mt = MEM_DDR3;
758 	else
759 		mt = MEM_DDR2;
760 
761 	return mt;
762 }
763 
764 /**
765  * zynqmp_get_mtype - Returns controller memory type.
766  * @base:	Synopsys ECC status structure.
767  *
768  * Get the EDAC memory type appropriate for the current controller
769  * configuration.
770  *
771  * Return: a memory type enumeration.
772  */
773 static enum mem_type zynqmp_get_mtype(const void __iomem *base)
774 {
775 	enum mem_type mt;
776 	u32 memtype;
777 
778 	memtype = readl(base + CTRL_OFST);
779 
780 	if ((memtype & MEM_TYPE_DDR3) || (memtype & MEM_TYPE_LPDDR3))
781 		mt = MEM_DDR3;
782 	else if (memtype & MEM_TYPE_DDR2)
783 		mt = MEM_RDDR2;
784 	else if ((memtype & MEM_TYPE_LPDDR4) || (memtype & MEM_TYPE_DDR4))
785 		mt = MEM_DDR4;
786 	else
787 		mt = MEM_EMPTY;
788 
789 	return mt;
790 }
791 
792 /**
793  * init_csrows - Initialize the csrow data.
794  * @mci:	EDAC memory controller instance.
795  *
796  * Initialize the chip select rows associated with the EDAC memory
797  * controller instance.
798  */
799 static void init_csrows(struct mem_ctl_info *mci)
800 {
801 	struct synps_edac_priv *priv = mci->pvt_info;
802 	const struct synps_platform_data *p_data;
803 	struct csrow_info *csi;
804 	struct dimm_info *dimm;
805 	u32 size, row;
806 	int j;
807 
808 	p_data = priv->p_data;
809 
810 	for (row = 0; row < mci->nr_csrows; row++) {
811 		csi = mci->csrows[row];
812 		size = get_memsize();
813 
814 		for (j = 0; j < csi->nr_channels; j++) {
815 			dimm		= csi->channels[j]->dimm;
816 			dimm->edac_mode	= EDAC_SECDED;
817 			dimm->mtype	= p_data->get_mtype(priv->baseaddr);
818 			dimm->nr_pages	= (size >> PAGE_SHIFT) / csi->nr_channels;
819 			dimm->grain	= SYNPS_EDAC_ERR_GRAIN;
820 			dimm->dtype	= p_data->get_dtype(priv->baseaddr);
821 		}
822 	}
823 }
824 
825 /**
826  * mc_init - Initialize one driver instance.
827  * @mci:	EDAC memory controller instance.
828  * @pdev:	platform device.
829  *
830  * Perform initialization of the EDAC memory controller instance and
831  * related driver-private data associated with the memory controller the
832  * instance is bound to.
833  */
834 static void mc_init(struct mem_ctl_info *mci, struct platform_device *pdev)
835 {
836 	struct synps_edac_priv *priv;
837 
838 	mci->pdev = &pdev->dev;
839 	priv = mci->pvt_info;
840 	platform_set_drvdata(pdev, mci);
841 
842 	/* Initialize controller capabilities and configuration */
843 	mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
844 	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
845 	mci->scrub_cap = SCRUB_HW_SRC;
846 	mci->scrub_mode = SCRUB_NONE;
847 
848 	mci->edac_cap = EDAC_FLAG_SECDED;
849 	mci->ctl_name = "synps_ddr_controller";
850 	mci->dev_name = SYNPS_EDAC_MOD_STRING;
851 	mci->mod_name = SYNPS_EDAC_MOD_VER;
852 
853 	if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
854 		edac_op_state = EDAC_OPSTATE_INT;
855 	} else {
856 		edac_op_state = EDAC_OPSTATE_POLL;
857 		mci->edac_check = check_errors;
858 	}
859 
860 	mci->ctl_page_to_phys = NULL;
861 
862 	init_csrows(mci);
863 }
864 
865 static int setup_irq(struct mem_ctl_info *mci,
866 		     struct platform_device *pdev)
867 {
868 	struct synps_edac_priv *priv = mci->pvt_info;
869 	int ret, irq;
870 
871 	irq = platform_get_irq(pdev, 0);
872 	if (irq < 0) {
873 		edac_printk(KERN_ERR, EDAC_MC,
874 			    "No IRQ %d in DT\n", irq);
875 		return irq;
876 	}
877 
878 	ret = devm_request_irq(&pdev->dev, irq, intr_handler,
879 			       0, dev_name(&pdev->dev), mci);
880 	if (ret < 0) {
881 		edac_printk(KERN_ERR, EDAC_MC, "Failed to request IRQ\n");
882 		return ret;
883 	}
884 
885 	enable_intr(priv);
886 
887 	return 0;
888 }
889 
890 static const struct synps_platform_data zynq_edac_def = {
891 	.get_error_info	= zynq_get_error_info,
892 	.get_mtype	= zynq_get_mtype,
893 	.get_dtype	= zynq_get_dtype,
894 	.get_ecc_state	= zynq_get_ecc_state,
895 	.quirks		= 0,
896 };
897 
898 static const struct synps_platform_data zynqmp_edac_def = {
899 	.get_error_info	= zynqmp_get_error_info,
900 	.get_mtype	= zynqmp_get_mtype,
901 	.get_dtype	= zynqmp_get_dtype,
902 	.get_ecc_state	= zynqmp_get_ecc_state,
903 	.quirks         = (DDR_ECC_INTR_SUPPORT
904 #ifdef CONFIG_EDAC_DEBUG
905 			  | DDR_ECC_DATA_POISON_SUPPORT
906 #endif
907 			  ),
908 };
909 
910 static const struct synps_platform_data synopsys_edac_def = {
911 	.get_error_info	= zynqmp_get_error_info,
912 	.get_mtype	= zynqmp_get_mtype,
913 	.get_dtype	= zynqmp_get_dtype,
914 	.get_ecc_state	= zynqmp_get_ecc_state,
915 	.quirks         = (DDR_ECC_INTR_SUPPORT | DDR_ECC_INTR_SELF_CLEAR
916 #ifdef CONFIG_EDAC_DEBUG
917 			  | DDR_ECC_DATA_POISON_SUPPORT
918 #endif
919 			  ),
920 };
921 
922 
923 static const struct of_device_id synps_edac_match[] = {
924 	{
925 		.compatible = "xlnx,zynq-ddrc-a05",
926 		.data = (void *)&zynq_edac_def
927 	},
928 	{
929 		.compatible = "xlnx,zynqmp-ddrc-2.40a",
930 		.data = (void *)&zynqmp_edac_def
931 	},
932 	{
933 		.compatible = "snps,ddrc-3.80a",
934 		.data = (void *)&synopsys_edac_def
935 	},
936 	{
937 		/* end of table */
938 	}
939 };
940 
941 MODULE_DEVICE_TABLE(of, synps_edac_match);
942 
943 #ifdef CONFIG_EDAC_DEBUG
944 #define to_mci(k) container_of(k, struct mem_ctl_info, dev)
945 
946 /**
947  * ddr_poison_setup -	Update poison registers.
948  * @priv:		DDR memory controller private instance data.
949  *
950  * Update poison registers as per DDR mapping.
951  * Return: none.
952  */
953 static void ddr_poison_setup(struct synps_edac_priv *priv)
954 {
955 	int col = 0, row = 0, bank = 0, bankgrp = 0, rank = 0, regval;
956 	int index;
957 	ulong hif_addr = 0;
958 
959 	hif_addr = priv->poison_addr >> 3;
960 
961 	for (index = 0; index < DDR_MAX_ROW_SHIFT; index++) {
962 		if (priv->row_shift[index])
963 			row |= (((hif_addr >> priv->row_shift[index]) &
964 						BIT(0)) << index);
965 		else
966 			break;
967 	}
968 
969 	for (index = 0; index < DDR_MAX_COL_SHIFT; index++) {
970 		if (priv->col_shift[index] || index < 3)
971 			col |= (((hif_addr >> priv->col_shift[index]) &
972 						BIT(0)) << index);
973 		else
974 			break;
975 	}
976 
977 	for (index = 0; index < DDR_MAX_BANK_SHIFT; index++) {
978 		if (priv->bank_shift[index])
979 			bank |= (((hif_addr >> priv->bank_shift[index]) &
980 						BIT(0)) << index);
981 		else
982 			break;
983 	}
984 
985 	for (index = 0; index < DDR_MAX_BANKGRP_SHIFT; index++) {
986 		if (priv->bankgrp_shift[index])
987 			bankgrp |= (((hif_addr >> priv->bankgrp_shift[index])
988 						& BIT(0)) << index);
989 		else
990 			break;
991 	}
992 
993 	if (priv->rank_shift[0])
994 		rank = (hif_addr >> priv->rank_shift[0]) & BIT(0);
995 
996 	regval = (rank << ECC_POISON0_RANK_SHIFT) & ECC_POISON0_RANK_MASK;
997 	regval |= (col << ECC_POISON0_COLUMN_SHIFT) & ECC_POISON0_COLUMN_MASK;
998 	writel(regval, priv->baseaddr + ECC_POISON0_OFST);
999 
1000 	regval = (bankgrp << ECC_POISON1_BG_SHIFT) & ECC_POISON1_BG_MASK;
1001 	regval |= (bank << ECC_POISON1_BANKNR_SHIFT) & ECC_POISON1_BANKNR_MASK;
1002 	regval |= (row << ECC_POISON1_ROW_SHIFT) & ECC_POISON1_ROW_MASK;
1003 	writel(regval, priv->baseaddr + ECC_POISON1_OFST);
1004 }
1005 
1006 static ssize_t inject_data_error_show(struct device *dev,
1007 				      struct device_attribute *mattr,
1008 				      char *data)
1009 {
1010 	struct mem_ctl_info *mci = to_mci(dev);
1011 	struct synps_edac_priv *priv = mci->pvt_info;
1012 
1013 	return sprintf(data, "Poison0 Addr: 0x%08x\n\rPoison1 Addr: 0x%08x\n\r"
1014 			"Error injection Address: 0x%lx\n\r",
1015 			readl(priv->baseaddr + ECC_POISON0_OFST),
1016 			readl(priv->baseaddr + ECC_POISON1_OFST),
1017 			priv->poison_addr);
1018 }
1019 
1020 static ssize_t inject_data_error_store(struct device *dev,
1021 				       struct device_attribute *mattr,
1022 				       const char *data, size_t count)
1023 {
1024 	struct mem_ctl_info *mci = to_mci(dev);
1025 	struct synps_edac_priv *priv = mci->pvt_info;
1026 
1027 	if (kstrtoul(data, 0, &priv->poison_addr))
1028 		return -EINVAL;
1029 
1030 	ddr_poison_setup(priv);
1031 
1032 	return count;
1033 }
1034 
1035 static ssize_t inject_data_poison_show(struct device *dev,
1036 				       struct device_attribute *mattr,
1037 				       char *data)
1038 {
1039 	struct mem_ctl_info *mci = to_mci(dev);
1040 	struct synps_edac_priv *priv = mci->pvt_info;
1041 
1042 	return sprintf(data, "Data Poisoning: %s\n\r",
1043 			(((readl(priv->baseaddr + ECC_CFG1_OFST)) & 0x3) == 0x3)
1044 			? ("Correctable Error") : ("UnCorrectable Error"));
1045 }
1046 
1047 static ssize_t inject_data_poison_store(struct device *dev,
1048 					struct device_attribute *mattr,
1049 					const char *data, size_t count)
1050 {
1051 	struct mem_ctl_info *mci = to_mci(dev);
1052 	struct synps_edac_priv *priv = mci->pvt_info;
1053 
1054 	writel(0, priv->baseaddr + DDRC_SWCTL);
1055 	if (strncmp(data, "CE", 2) == 0)
1056 		writel(ECC_CEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST);
1057 	else
1058 		writel(ECC_UEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST);
1059 	writel(1, priv->baseaddr + DDRC_SWCTL);
1060 
1061 	return count;
1062 }
1063 
1064 static DEVICE_ATTR_RW(inject_data_error);
1065 static DEVICE_ATTR_RW(inject_data_poison);
1066 
1067 static int edac_create_sysfs_attributes(struct mem_ctl_info *mci)
1068 {
1069 	int rc;
1070 
1071 	rc = device_create_file(&mci->dev, &dev_attr_inject_data_error);
1072 	if (rc < 0)
1073 		return rc;
1074 	rc = device_create_file(&mci->dev, &dev_attr_inject_data_poison);
1075 	if (rc < 0)
1076 		return rc;
1077 	return 0;
1078 }
1079 
1080 static void edac_remove_sysfs_attributes(struct mem_ctl_info *mci)
1081 {
1082 	device_remove_file(&mci->dev, &dev_attr_inject_data_error);
1083 	device_remove_file(&mci->dev, &dev_attr_inject_data_poison);
1084 }
1085 
1086 static void setup_row_address_map(struct synps_edac_priv *priv, u32 *addrmap)
1087 {
1088 	u32 addrmap_row_b2_10;
1089 	int index;
1090 
1091 	priv->row_shift[0] = (addrmap[5] & ROW_MAX_VAL_MASK) + ROW_B0_BASE;
1092 	priv->row_shift[1] = ((addrmap[5] >> 8) &
1093 			ROW_MAX_VAL_MASK) + ROW_B1_BASE;
1094 
1095 	addrmap_row_b2_10 = (addrmap[5] >> 16) & ROW_MAX_VAL_MASK;
1096 	if (addrmap_row_b2_10 != ROW_MAX_VAL_MASK) {
1097 		for (index = 2; index < 11; index++)
1098 			priv->row_shift[index] = addrmap_row_b2_10 +
1099 				index + ROW_B0_BASE;
1100 
1101 	} else {
1102 		priv->row_shift[2] = (addrmap[9] &
1103 				ROW_MAX_VAL_MASK) + ROW_B2_BASE;
1104 		priv->row_shift[3] = ((addrmap[9] >> 8) &
1105 				ROW_MAX_VAL_MASK) + ROW_B3_BASE;
1106 		priv->row_shift[4] = ((addrmap[9] >> 16) &
1107 				ROW_MAX_VAL_MASK) + ROW_B4_BASE;
1108 		priv->row_shift[5] = ((addrmap[9] >> 24) &
1109 				ROW_MAX_VAL_MASK) + ROW_B5_BASE;
1110 		priv->row_shift[6] = (addrmap[10] &
1111 				ROW_MAX_VAL_MASK) + ROW_B6_BASE;
1112 		priv->row_shift[7] = ((addrmap[10] >> 8) &
1113 				ROW_MAX_VAL_MASK) + ROW_B7_BASE;
1114 		priv->row_shift[8] = ((addrmap[10] >> 16) &
1115 				ROW_MAX_VAL_MASK) + ROW_B8_BASE;
1116 		priv->row_shift[9] = ((addrmap[10] >> 24) &
1117 				ROW_MAX_VAL_MASK) + ROW_B9_BASE;
1118 		priv->row_shift[10] = (addrmap[11] &
1119 				ROW_MAX_VAL_MASK) + ROW_B10_BASE;
1120 	}
1121 
1122 	priv->row_shift[11] = (((addrmap[5] >> 24) & ROW_MAX_VAL_MASK) ==
1123 				ROW_MAX_VAL_MASK) ? 0 : (((addrmap[5] >> 24) &
1124 				ROW_MAX_VAL_MASK) + ROW_B11_BASE);
1125 	priv->row_shift[12] = ((addrmap[6] & ROW_MAX_VAL_MASK) ==
1126 				ROW_MAX_VAL_MASK) ? 0 : ((addrmap[6] &
1127 				ROW_MAX_VAL_MASK) + ROW_B12_BASE);
1128 	priv->row_shift[13] = (((addrmap[6] >> 8) & ROW_MAX_VAL_MASK) ==
1129 				ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 8) &
1130 				ROW_MAX_VAL_MASK) + ROW_B13_BASE);
1131 	priv->row_shift[14] = (((addrmap[6] >> 16) & ROW_MAX_VAL_MASK) ==
1132 				ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 16) &
1133 				ROW_MAX_VAL_MASK) + ROW_B14_BASE);
1134 	priv->row_shift[15] = (((addrmap[6] >> 24) & ROW_MAX_VAL_MASK) ==
1135 				ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 24) &
1136 				ROW_MAX_VAL_MASK) + ROW_B15_BASE);
1137 	priv->row_shift[16] = ((addrmap[7] & ROW_MAX_VAL_MASK) ==
1138 				ROW_MAX_VAL_MASK) ? 0 : ((addrmap[7] &
1139 				ROW_MAX_VAL_MASK) + ROW_B16_BASE);
1140 	priv->row_shift[17] = (((addrmap[7] >> 8) & ROW_MAX_VAL_MASK) ==
1141 				ROW_MAX_VAL_MASK) ? 0 : (((addrmap[7] >> 8) &
1142 				ROW_MAX_VAL_MASK) + ROW_B17_BASE);
1143 }
1144 
1145 static void setup_column_address_map(struct synps_edac_priv *priv, u32 *addrmap)
1146 {
1147 	u32 width, memtype;
1148 	int index;
1149 
1150 	memtype = readl(priv->baseaddr + CTRL_OFST);
1151 	width = (memtype & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT;
1152 
1153 	priv->col_shift[0] = 0;
1154 	priv->col_shift[1] = 1;
1155 	priv->col_shift[2] = (addrmap[2] & COL_MAX_VAL_MASK) + COL_B2_BASE;
1156 	priv->col_shift[3] = ((addrmap[2] >> 8) &
1157 			COL_MAX_VAL_MASK) + COL_B3_BASE;
1158 	priv->col_shift[4] = (((addrmap[2] >> 16) & COL_MAX_VAL_MASK) ==
1159 			COL_MAX_VAL_MASK) ? 0 : (((addrmap[2] >> 16) &
1160 					COL_MAX_VAL_MASK) + COL_B4_BASE);
1161 	priv->col_shift[5] = (((addrmap[2] >> 24) & COL_MAX_VAL_MASK) ==
1162 			COL_MAX_VAL_MASK) ? 0 : (((addrmap[2] >> 24) &
1163 					COL_MAX_VAL_MASK) + COL_B5_BASE);
1164 	priv->col_shift[6] = ((addrmap[3] & COL_MAX_VAL_MASK) ==
1165 			COL_MAX_VAL_MASK) ? 0 : ((addrmap[3] &
1166 					COL_MAX_VAL_MASK) + COL_B6_BASE);
1167 	priv->col_shift[7] = (((addrmap[3] >> 8) & COL_MAX_VAL_MASK) ==
1168 			COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 8) &
1169 					COL_MAX_VAL_MASK) + COL_B7_BASE);
1170 	priv->col_shift[8] = (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) ==
1171 			COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 16) &
1172 					COL_MAX_VAL_MASK) + COL_B8_BASE);
1173 	priv->col_shift[9] = (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) ==
1174 			COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 24) &
1175 					COL_MAX_VAL_MASK) + COL_B9_BASE);
1176 	if (width == DDRCTL_EWDTH_64) {
1177 		if (memtype & MEM_TYPE_LPDDR3) {
1178 			priv->col_shift[10] = ((addrmap[4] &
1179 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1180 				((addrmap[4] & COL_MAX_VAL_MASK) +
1181 				 COL_B10_BASE);
1182 			priv->col_shift[11] = (((addrmap[4] >> 8) &
1183 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1184 				(((addrmap[4] >> 8) & COL_MAX_VAL_MASK) +
1185 				 COL_B11_BASE);
1186 		} else {
1187 			priv->col_shift[11] = ((addrmap[4] &
1188 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1189 				((addrmap[4] & COL_MAX_VAL_MASK) +
1190 				 COL_B10_BASE);
1191 			priv->col_shift[13] = (((addrmap[4] >> 8) &
1192 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1193 				(((addrmap[4] >> 8) & COL_MAX_VAL_MASK) +
1194 				 COL_B11_BASE);
1195 		}
1196 	} else if (width == DDRCTL_EWDTH_32) {
1197 		if (memtype & MEM_TYPE_LPDDR3) {
1198 			priv->col_shift[10] = (((addrmap[3] >> 24) &
1199 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1200 				(((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
1201 				 COL_B9_BASE);
1202 			priv->col_shift[11] = ((addrmap[4] &
1203 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1204 				((addrmap[4] & COL_MAX_VAL_MASK) +
1205 				 COL_B10_BASE);
1206 		} else {
1207 			priv->col_shift[11] = (((addrmap[3] >> 24) &
1208 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1209 				(((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
1210 				 COL_B9_BASE);
1211 			priv->col_shift[13] = ((addrmap[4] &
1212 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1213 				((addrmap[4] & COL_MAX_VAL_MASK) +
1214 				 COL_B10_BASE);
1215 		}
1216 	} else {
1217 		if (memtype & MEM_TYPE_LPDDR3) {
1218 			priv->col_shift[10] = (((addrmap[3] >> 16) &
1219 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1220 				(((addrmap[3] >> 16) & COL_MAX_VAL_MASK) +
1221 				 COL_B8_BASE);
1222 			priv->col_shift[11] = (((addrmap[3] >> 24) &
1223 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1224 				(((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
1225 				 COL_B9_BASE);
1226 			priv->col_shift[13] = ((addrmap[4] &
1227 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1228 				((addrmap[4] & COL_MAX_VAL_MASK) +
1229 				 COL_B10_BASE);
1230 		} else {
1231 			priv->col_shift[11] = (((addrmap[3] >> 16) &
1232 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1233 				(((addrmap[3] >> 16) & COL_MAX_VAL_MASK) +
1234 				 COL_B8_BASE);
1235 			priv->col_shift[13] = (((addrmap[3] >> 24) &
1236 				COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
1237 				(((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
1238 				 COL_B9_BASE);
1239 		}
1240 	}
1241 
1242 	if (width) {
1243 		for (index = 9; index > width; index--) {
1244 			priv->col_shift[index] = priv->col_shift[index - width];
1245 			priv->col_shift[index - width] = 0;
1246 		}
1247 	}
1248 
1249 }
1250 
1251 static void setup_bank_address_map(struct synps_edac_priv *priv, u32 *addrmap)
1252 {
1253 	priv->bank_shift[0] = (addrmap[1] & BANK_MAX_VAL_MASK) + BANK_B0_BASE;
1254 	priv->bank_shift[1] = ((addrmap[1] >> 8) &
1255 				BANK_MAX_VAL_MASK) + BANK_B1_BASE;
1256 	priv->bank_shift[2] = (((addrmap[1] >> 16) &
1257 				BANK_MAX_VAL_MASK) == BANK_MAX_VAL_MASK) ? 0 :
1258 				(((addrmap[1] >> 16) & BANK_MAX_VAL_MASK) +
1259 				 BANK_B2_BASE);
1260 
1261 }
1262 
1263 static void setup_bg_address_map(struct synps_edac_priv *priv, u32 *addrmap)
1264 {
1265 	priv->bankgrp_shift[0] = (addrmap[8] &
1266 				BANKGRP_MAX_VAL_MASK) + BANKGRP_B0_BASE;
1267 	priv->bankgrp_shift[1] = (((addrmap[8] >> 8) & BANKGRP_MAX_VAL_MASK) ==
1268 				BANKGRP_MAX_VAL_MASK) ? 0 : (((addrmap[8] >> 8)
1269 				& BANKGRP_MAX_VAL_MASK) + BANKGRP_B1_BASE);
1270 
1271 }
1272 
1273 static void setup_rank_address_map(struct synps_edac_priv *priv, u32 *addrmap)
1274 {
1275 	priv->rank_shift[0] = ((addrmap[0] & RANK_MAX_VAL_MASK) ==
1276 				RANK_MAX_VAL_MASK) ? 0 : ((addrmap[0] &
1277 				RANK_MAX_VAL_MASK) + RANK_B0_BASE);
1278 }
1279 
1280 /**
1281  * setup_address_map -	Set Address Map by querying ADDRMAP registers.
1282  * @priv:		DDR memory controller private instance data.
1283  *
1284  * Set Address Map by querying ADDRMAP registers.
1285  *
1286  * Return: none.
1287  */
1288 static void setup_address_map(struct synps_edac_priv *priv)
1289 {
1290 	u32 addrmap[12];
1291 	int index;
1292 
1293 	for (index = 0; index < 12; index++) {
1294 		u32 addrmap_offset;
1295 
1296 		addrmap_offset = ECC_ADDRMAP0_OFFSET + (index * 4);
1297 		addrmap[index] = readl(priv->baseaddr + addrmap_offset);
1298 	}
1299 
1300 	setup_row_address_map(priv, addrmap);
1301 
1302 	setup_column_address_map(priv, addrmap);
1303 
1304 	setup_bank_address_map(priv, addrmap);
1305 
1306 	setup_bg_address_map(priv, addrmap);
1307 
1308 	setup_rank_address_map(priv, addrmap);
1309 }
1310 #endif /* CONFIG_EDAC_DEBUG */
1311 
1312 /**
1313  * mc_probe - Check controller and bind driver.
1314  * @pdev:	platform device.
1315  *
1316  * Probe a specific controller instance for binding with the driver.
1317  *
1318  * Return: 0 if the controller instance was successfully bound to the
1319  * driver; otherwise, < 0 on error.
1320  */
1321 static int mc_probe(struct platform_device *pdev)
1322 {
1323 	const struct synps_platform_data *p_data;
1324 	struct edac_mc_layer layers[2];
1325 	struct synps_edac_priv *priv;
1326 	struct mem_ctl_info *mci;
1327 	void __iomem *baseaddr;
1328 	struct resource *res;
1329 	int rc;
1330 
1331 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1332 	baseaddr = devm_ioremap_resource(&pdev->dev, res);
1333 	if (IS_ERR(baseaddr))
1334 		return PTR_ERR(baseaddr);
1335 
1336 	p_data = of_device_get_match_data(&pdev->dev);
1337 	if (!p_data)
1338 		return -ENODEV;
1339 
1340 	if (!p_data->get_ecc_state(baseaddr)) {
1341 		edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n");
1342 		return -ENXIO;
1343 	}
1344 
1345 	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
1346 	layers[0].size = SYNPS_EDAC_NR_CSROWS;
1347 	layers[0].is_virt_csrow = true;
1348 	layers[1].type = EDAC_MC_LAYER_CHANNEL;
1349 	layers[1].size = SYNPS_EDAC_NR_CHANS;
1350 	layers[1].is_virt_csrow = false;
1351 
1352 	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
1353 			    sizeof(struct synps_edac_priv));
1354 	if (!mci) {
1355 		edac_printk(KERN_ERR, EDAC_MC,
1356 			    "Failed memory allocation for mc instance\n");
1357 		return -ENOMEM;
1358 	}
1359 
1360 	priv = mci->pvt_info;
1361 	priv->baseaddr = baseaddr;
1362 	priv->p_data = p_data;
1363 
1364 	mc_init(mci, pdev);
1365 
1366 	if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
1367 		rc = setup_irq(mci, pdev);
1368 		if (rc)
1369 			goto free_edac_mc;
1370 	}
1371 
1372 	rc = edac_mc_add_mc(mci);
1373 	if (rc) {
1374 		edac_printk(KERN_ERR, EDAC_MC,
1375 			    "Failed to register with EDAC core\n");
1376 		goto free_edac_mc;
1377 	}
1378 
1379 #ifdef CONFIG_EDAC_DEBUG
1380 	if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT) {
1381 		rc = edac_create_sysfs_attributes(mci);
1382 		if (rc) {
1383 			edac_printk(KERN_ERR, EDAC_MC,
1384 					"Failed to create sysfs entries\n");
1385 			goto free_edac_mc;
1386 		}
1387 	}
1388 
1389 	if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)
1390 		setup_address_map(priv);
1391 #endif
1392 
1393 	/*
1394 	 * Start capturing the correctable and uncorrectable errors. A write of
1395 	 * 0 starts the counters.
1396 	 */
1397 	if (!(priv->p_data->quirks & DDR_ECC_INTR_SUPPORT))
1398 		writel(0x0, baseaddr + ECC_CTRL_OFST);
1399 
1400 	return rc;
1401 
1402 free_edac_mc:
1403 	edac_mc_free(mci);
1404 
1405 	return rc;
1406 }
1407 
1408 /**
1409  * mc_remove - Unbind driver from controller.
1410  * @pdev:	Platform device.
1411  *
1412  * Return: Unconditionally 0
1413  */
1414 static int mc_remove(struct platform_device *pdev)
1415 {
1416 	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
1417 	struct synps_edac_priv *priv = mci->pvt_info;
1418 
1419 	if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)
1420 		disable_intr(priv);
1421 
1422 #ifdef CONFIG_EDAC_DEBUG
1423 	if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT)
1424 		edac_remove_sysfs_attributes(mci);
1425 #endif
1426 
1427 	edac_mc_del_mc(&pdev->dev);
1428 	edac_mc_free(mci);
1429 
1430 	return 0;
1431 }
1432 
1433 static struct platform_driver synps_edac_mc_driver = {
1434 	.driver = {
1435 		   .name = "synopsys-edac",
1436 		   .of_match_table = synps_edac_match,
1437 		   },
1438 	.probe = mc_probe,
1439 	.remove = mc_remove,
1440 };
1441 
1442 module_platform_driver(synps_edac_mc_driver);
1443 
1444 MODULE_AUTHOR("Xilinx Inc");
1445 MODULE_DESCRIPTION("Synopsys DDR ECC driver");
1446 MODULE_LICENSE("GPL v2");
1447