1 /* 2 * Intel 82975X Memory Controller kernel module 3 * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com) 4 * (C) 2007 jetzbroadband (http://jetzbroadband.com) 5 * This file may be distributed under the terms of the 6 * GNU General Public License. 7 * 8 * Written by Arvind R. 9 * Copied from i82875p_edac.c source: 10 */ 11 12 #include <linux/module.h> 13 #include <linux/init.h> 14 #include <linux/pci.h> 15 #include <linux/pci_ids.h> 16 #include <linux/edac.h> 17 #include "edac_core.h" 18 19 #define I82975X_REVISION " Ver: 1.0.0" 20 #define EDAC_MOD_STR "i82975x_edac" 21 22 #define i82975x_printk(level, fmt, arg...) \ 23 edac_printk(level, "i82975x", fmt, ##arg) 24 25 #define i82975x_mc_printk(mci, level, fmt, arg...) \ 26 edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg) 27 28 #ifndef PCI_DEVICE_ID_INTEL_82975_0 29 #define PCI_DEVICE_ID_INTEL_82975_0 0x277c 30 #endif /* PCI_DEVICE_ID_INTEL_82975_0 */ 31 32 #define I82975X_NR_DIMMS 8 33 #define I82975X_NR_CSROWS(nr_chans) (I82975X_NR_DIMMS / (nr_chans)) 34 35 /* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */ 36 #define I82975X_EAP 0x58 /* Dram Error Address Pointer (32b) 37 * 38 * 31:7 128 byte cache-line address 39 * 6:1 reserved 40 * 0 0: CH0; 1: CH1 41 */ 42 43 #define I82975X_DERRSYN 0x5c /* Dram Error SYNdrome (8b) 44 * 45 * 7:0 DRAM ECC Syndrome 46 */ 47 48 #define I82975X_DES 0x5d /* Dram ERRor DeSTination (8b) 49 * 0h: Processor Memory Reads 50 * 1h:7h reserved 51 * More - See Page 65 of Intel DocSheet. 52 */ 53 54 #define I82975X_ERRSTS 0xc8 /* Error Status Register (16b) 55 * 56 * 15:12 reserved 57 * 11 Thermal Sensor Event 58 * 10 reserved 59 * 9 non-DRAM lock error (ndlock) 60 * 8 Refresh Timeout 61 * 7:2 reserved 62 * 1 ECC UE (multibit DRAM error) 63 * 0 ECC CE (singlebit DRAM error) 64 */ 65 66 /* Error Reporting is supported by 3 mechanisms: 67 1. DMI SERR generation ( ERRCMD ) 68 2. SMI DMI generation ( SMICMD ) 69 3. SCI DMI generation ( SCICMD ) 70 NOTE: Only ONE of the three must be enabled 71 */ 72 #define I82975X_ERRCMD 0xca /* Error Command (16b) 73 * 74 * 15:12 reserved 75 * 11 Thermal Sensor Event 76 * 10 reserved 77 * 9 non-DRAM lock error (ndlock) 78 * 8 Refresh Timeout 79 * 7:2 reserved 80 * 1 ECC UE (multibit DRAM error) 81 * 0 ECC CE (singlebit DRAM error) 82 */ 83 84 #define I82975X_SMICMD 0xcc /* Error Command (16b) 85 * 86 * 15:2 reserved 87 * 1 ECC UE (multibit DRAM error) 88 * 0 ECC CE (singlebit DRAM error) 89 */ 90 91 #define I82975X_SCICMD 0xce /* Error Command (16b) 92 * 93 * 15:2 reserved 94 * 1 ECC UE (multibit DRAM error) 95 * 0 ECC CE (singlebit DRAM error) 96 */ 97 98 #define I82975X_XEAP 0xfc /* Extended Dram Error Address Pointer (8b) 99 * 100 * 7:1 reserved 101 * 0 Bit32 of the Dram Error Address 102 */ 103 104 #define I82975X_MCHBAR 0x44 /* 105 * 106 * 31:14 Base Addr of 16K memory-mapped 107 * configuration space 108 * 13:1 reserverd 109 * 0 mem-mapped config space enable 110 */ 111 112 /* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */ 113 /* Intel 82975x memory mapped register space */ 114 115 #define I82975X_DRB_SHIFT 25 /* fixed 32MiB grain */ 116 117 #define I82975X_DRB 0x100 /* DRAM Row Boundary (8b x 8) 118 * 119 * 7 set to 1 in highest DRB of 120 * channel if 4GB in ch. 121 * 6:2 upper boundary of rank in 122 * 32MB grains 123 * 1:0 set to 0 124 */ 125 #define I82975X_DRB_CH0R0 0x100 126 #define I82975X_DRB_CH0R1 0x101 127 #define I82975X_DRB_CH0R2 0x102 128 #define I82975X_DRB_CH0R3 0x103 129 #define I82975X_DRB_CH1R0 0x180 130 #define I82975X_DRB_CH1R1 0x181 131 #define I82975X_DRB_CH1R2 0x182 132 #define I82975X_DRB_CH1R3 0x183 133 134 135 #define I82975X_DRA 0x108 /* DRAM Row Attribute (4b x 8) 136 * defines the PAGE SIZE to be used 137 * for the rank 138 * 7 reserved 139 * 6:4 row attr of odd rank, i.e. 1 140 * 3 reserved 141 * 2:0 row attr of even rank, i.e. 0 142 * 143 * 000 = unpopulated 144 * 001 = reserved 145 * 010 = 4KiB 146 * 011 = 8KiB 147 * 100 = 16KiB 148 * others = reserved 149 */ 150 #define I82975X_DRA_CH0R01 0x108 151 #define I82975X_DRA_CH0R23 0x109 152 #define I82975X_DRA_CH1R01 0x188 153 #define I82975X_DRA_CH1R23 0x189 154 155 156 #define I82975X_BNKARC 0x10e /* Type of device in each rank - Bank Arch (16b) 157 * 158 * 15:8 reserved 159 * 7:6 Rank 3 architecture 160 * 5:4 Rank 2 architecture 161 * 3:2 Rank 1 architecture 162 * 1:0 Rank 0 architecture 163 * 164 * 00 => 4 banks 165 * 01 => 8 banks 166 */ 167 #define I82975X_C0BNKARC 0x10e 168 #define I82975X_C1BNKARC 0x18e 169 170 171 172 #define I82975X_DRC 0x120 /* DRAM Controller Mode0 (32b) 173 * 174 * 31:30 reserved 175 * 29 init complete 176 * 28:11 reserved, according to Intel 177 * 22:21 number of channels 178 * 00=1 01=2 in 82875 179 * seems to be ECC mode 180 * bits in 82975 in Asus 181 * P5W 182 * 19:18 Data Integ Mode 183 * 00=none 01=ECC in 82875 184 * 10:8 refresh mode 185 * 7 reserved 186 * 6:4 mode select 187 * 3:2 reserved 188 * 1:0 DRAM type 10=Second Revision 189 * DDR2 SDRAM 190 * 00, 01, 11 reserved 191 */ 192 #define I82975X_DRC_CH0M0 0x120 193 #define I82975X_DRC_CH1M0 0x1A0 194 195 196 #define I82975X_DRC_M1 0x124 /* DRAM Controller Mode1 (32b) 197 * 31 0=Standard Address Map 198 * 1=Enhanced Address Map 199 * 30:0 reserved 200 */ 201 202 #define I82975X_DRC_CH0M1 0x124 203 #define I82975X_DRC_CH1M1 0x1A4 204 205 enum i82975x_chips { 206 I82975X = 0, 207 }; 208 209 struct i82975x_pvt { 210 void __iomem *mch_window; 211 }; 212 213 struct i82975x_dev_info { 214 const char *ctl_name; 215 }; 216 217 struct i82975x_error_info { 218 u16 errsts; 219 u32 eap; 220 u8 des; 221 u8 derrsyn; 222 u16 errsts2; 223 u8 chan; /* the channel is bit 0 of EAP */ 224 u8 xeap; /* extended eap bit */ 225 }; 226 227 static const struct i82975x_dev_info i82975x_devs[] = { 228 [I82975X] = { 229 .ctl_name = "i82975x" 230 }, 231 }; 232 233 static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has 234 * already registered driver 235 */ 236 237 static int i82975x_registered = 1; 238 239 static void i82975x_get_error_info(struct mem_ctl_info *mci, 240 struct i82975x_error_info *info) 241 { 242 struct pci_dev *pdev; 243 244 pdev = to_pci_dev(mci->pdev); 245 246 /* 247 * This is a mess because there is no atomic way to read all the 248 * registers at once and the registers can transition from CE being 249 * overwritten by UE. 250 */ 251 pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts); 252 pci_read_config_dword(pdev, I82975X_EAP, &info->eap); 253 pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap); 254 pci_read_config_byte(pdev, I82975X_DES, &info->des); 255 pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn); 256 pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2); 257 258 pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003); 259 260 /* 261 * If the error is the same then we can for both reads then 262 * the first set of reads is valid. If there is a change then 263 * there is a CE no info and the second set of reads is valid 264 * and should be UE info. 265 */ 266 if (!(info->errsts2 & 0x0003)) 267 return; 268 269 if ((info->errsts ^ info->errsts2) & 0x0003) { 270 pci_read_config_dword(pdev, I82975X_EAP, &info->eap); 271 pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap); 272 pci_read_config_byte(pdev, I82975X_DES, &info->des); 273 pci_read_config_byte(pdev, I82975X_DERRSYN, 274 &info->derrsyn); 275 } 276 } 277 278 static int i82975x_process_error_info(struct mem_ctl_info *mci, 279 struct i82975x_error_info *info, int handle_errors) 280 { 281 int row, chan; 282 unsigned long offst, page; 283 284 if (!(info->errsts2 & 0x0003)) 285 return 0; 286 287 if (!handle_errors) 288 return 1; 289 290 if ((info->errsts ^ info->errsts2) & 0x0003) { 291 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, 292 -1, -1, -1, "UE overwrote CE", ""); 293 info->errsts = info->errsts2; 294 } 295 296 page = (unsigned long) info->eap; 297 page >>= 1; 298 if (info->xeap & 1) 299 page |= 0x80000000; 300 page >>= (PAGE_SHIFT - 1); 301 row = edac_mc_find_csrow_by_page(mci, page); 302 303 if (row == -1) { 304 i82975x_mc_printk(mci, KERN_ERR, "error processing EAP:\n" 305 "\tXEAP=%u\n" 306 "\t EAP=0x%08x\n" 307 "\tPAGE=0x%08x\n", 308 (info->xeap & 1) ? 1 : 0, info->eap, (unsigned int) page); 309 return 0; 310 } 311 chan = (mci->csrows[row]->nr_channels == 1) ? 0 : info->eap & 1; 312 offst = info->eap 313 & ((1 << PAGE_SHIFT) - 314 (1 << mci->csrows[row]->channels[chan]->dimm->grain)); 315 316 if (info->errsts & 0x0002) 317 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 318 page, offst, 0, 319 row, -1, -1, 320 "i82975x UE", ""); 321 else 322 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 323 page, offst, info->derrsyn, 324 row, chan ? chan : 0, -1, 325 "i82975x CE", ""); 326 327 return 1; 328 } 329 330 static void i82975x_check(struct mem_ctl_info *mci) 331 { 332 struct i82975x_error_info info; 333 334 edac_dbg(1, "MC%d\n", mci->mc_idx); 335 i82975x_get_error_info(mci, &info); 336 i82975x_process_error_info(mci, &info, 1); 337 } 338 339 /* Return 1 if dual channel mode is active. Else return 0. */ 340 static int dual_channel_active(void __iomem *mch_window) 341 { 342 /* 343 * We treat interleaved-symmetric configuration as dual-channel - EAP's 344 * bit-0 giving the channel of the error location. 345 * 346 * All other configurations are treated as single channel - the EAP's 347 * bit-0 will resolve ok in symmetric area of mixed 348 * (symmetric/asymmetric) configurations 349 */ 350 u8 drb[4][2]; 351 int row; 352 int dualch; 353 354 for (dualch = 1, row = 0; dualch && (row < 4); row++) { 355 drb[row][0] = readb(mch_window + I82975X_DRB + row); 356 drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80); 357 dualch = dualch && (drb[row][0] == drb[row][1]); 358 } 359 return dualch; 360 } 361 362 static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank) 363 { 364 /* 365 * ECC is possible on i92975x ONLY with DEV_X8 366 */ 367 return DEV_X8; 368 } 369 370 static void i82975x_init_csrows(struct mem_ctl_info *mci, 371 struct pci_dev *pdev, void __iomem *mch_window) 372 { 373 struct csrow_info *csrow; 374 unsigned long last_cumul_size; 375 u8 value; 376 u32 cumul_size, nr_pages; 377 int index, chan; 378 struct dimm_info *dimm; 379 enum dev_type dtype; 380 381 last_cumul_size = 0; 382 383 /* 384 * 82875 comment: 385 * The dram row boundary (DRB) reg values are boundary address 386 * for each DRAM row with a granularity of 32 or 64MB (single/dual 387 * channel operation). DRB regs are cumulative; therefore DRB7 will 388 * contain the total memory contained in all rows. 389 * 390 */ 391 392 for (index = 0; index < mci->nr_csrows; index++) { 393 csrow = mci->csrows[index]; 394 395 value = readb(mch_window + I82975X_DRB + index + 396 ((index >= 4) ? 0x80 : 0)); 397 cumul_size = value; 398 cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT); 399 /* 400 * Adjust cumul_size w.r.t number of channels 401 * 402 */ 403 if (csrow->nr_channels > 1) 404 cumul_size <<= 1; 405 edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size); 406 407 nr_pages = cumul_size - last_cumul_size; 408 if (!nr_pages) 409 continue; 410 411 /* 412 * Initialise dram labels 413 * index values: 414 * [0-7] for single-channel; i.e. csrow->nr_channels = 1 415 * [0-3] for dual-channel; i.e. csrow->nr_channels = 2 416 */ 417 dtype = i82975x_dram_type(mch_window, index); 418 for (chan = 0; chan < csrow->nr_channels; chan++) { 419 dimm = mci->csrows[index]->channels[chan]->dimm; 420 421 dimm->nr_pages = nr_pages / csrow->nr_channels; 422 423 snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d", 424 (chan == 0) ? 'A' : 'B', 425 index); 426 dimm->grain = 1 << 7; /* 128Byte cache-line resolution */ 427 dimm->dtype = i82975x_dram_type(mch_window, index); 428 dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */ 429 dimm->edac_mode = EDAC_SECDED; /* only supported */ 430 } 431 432 csrow->first_page = last_cumul_size; 433 csrow->last_page = cumul_size - 1; 434 last_cumul_size = cumul_size; 435 } 436 } 437 438 /* #define i82975x_DEBUG_IOMEM */ 439 440 #ifdef i82975x_DEBUG_IOMEM 441 static void i82975x_print_dram_timings(void __iomem *mch_window) 442 { 443 /* 444 * The register meanings are from Intel specs; 445 * (shows 13-5-5-5 for 800-DDR2) 446 * Asus P5W Bios reports 15-5-4-4 447 * What's your religion? 448 */ 449 static const int caslats[4] = { 5, 4, 3, 6 }; 450 u32 dtreg[2]; 451 452 dtreg[0] = readl(mch_window + 0x114); 453 dtreg[1] = readl(mch_window + 0x194); 454 i82975x_printk(KERN_INFO, "DRAM Timings : Ch0 Ch1\n" 455 " RAS Active Min = %d %d\n" 456 " CAS latency = %d %d\n" 457 " RAS to CAS = %d %d\n" 458 " RAS precharge = %d %d\n", 459 (dtreg[0] >> 19 ) & 0x0f, 460 (dtreg[1] >> 19) & 0x0f, 461 caslats[(dtreg[0] >> 8) & 0x03], 462 caslats[(dtreg[1] >> 8) & 0x03], 463 ((dtreg[0] >> 4) & 0x07) + 2, 464 ((dtreg[1] >> 4) & 0x07) + 2, 465 (dtreg[0] & 0x07) + 2, 466 (dtreg[1] & 0x07) + 2 467 ); 468 469 } 470 #endif 471 472 static int i82975x_probe1(struct pci_dev *pdev, int dev_idx) 473 { 474 int rc = -ENODEV; 475 struct mem_ctl_info *mci; 476 struct edac_mc_layer layers[2]; 477 struct i82975x_pvt *pvt; 478 void __iomem *mch_window; 479 u32 mchbar; 480 u32 drc[2]; 481 struct i82975x_error_info discard; 482 int chans; 483 #ifdef i82975x_DEBUG_IOMEM 484 u8 c0drb[4]; 485 u8 c1drb[4]; 486 #endif 487 488 edac_dbg(0, "\n"); 489 490 pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar); 491 if (!(mchbar & 1)) { 492 edac_dbg(3, "failed, MCHBAR disabled!\n"); 493 goto fail0; 494 } 495 mchbar &= 0xffffc000; /* bits 31:14 used for 16K window */ 496 mch_window = ioremap_nocache(mchbar, 0x1000); 497 498 #ifdef i82975x_DEBUG_IOMEM 499 i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n", 500 mchbar, mch_window); 501 502 c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0); 503 c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1); 504 c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2); 505 c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3); 506 c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0); 507 c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1); 508 c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2); 509 c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3); 510 i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]); 511 i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]); 512 i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]); 513 i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]); 514 i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]); 515 i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]); 516 i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]); 517 i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]); 518 #endif 519 520 drc[0] = readl(mch_window + I82975X_DRC_CH0M0); 521 drc[1] = readl(mch_window + I82975X_DRC_CH1M0); 522 #ifdef i82975x_DEBUG_IOMEM 523 i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0], 524 ((drc[0] >> 21) & 3) == 1 ? 525 "ECC enabled" : "ECC disabled"); 526 i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1], 527 ((drc[1] >> 21) & 3) == 1 ? 528 "ECC enabled" : "ECC disabled"); 529 530 i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n", 531 readw(mch_window + I82975X_C0BNKARC)); 532 i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n", 533 readw(mch_window + I82975X_C1BNKARC)); 534 i82975x_print_dram_timings(mch_window); 535 goto fail1; 536 #endif 537 if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) { 538 i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n"); 539 goto fail1; 540 } 541 542 chans = dual_channel_active(mch_window) + 1; 543 544 /* assuming only one controller, index thus is 0 */ 545 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; 546 layers[0].size = I82975X_NR_DIMMS; 547 layers[0].is_virt_csrow = true; 548 layers[1].type = EDAC_MC_LAYER_CHANNEL; 549 layers[1].size = I82975X_NR_CSROWS(chans); 550 layers[1].is_virt_csrow = false; 551 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); 552 if (!mci) { 553 rc = -ENOMEM; 554 goto fail1; 555 } 556 557 edac_dbg(3, "init mci\n"); 558 mci->pdev = &pdev->dev; 559 mci->mtype_cap = MEM_FLAG_DDR2; 560 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; 561 mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; 562 mci->mod_name = EDAC_MOD_STR; 563 mci->mod_ver = I82975X_REVISION; 564 mci->ctl_name = i82975x_devs[dev_idx].ctl_name; 565 mci->dev_name = pci_name(pdev); 566 mci->edac_check = i82975x_check; 567 mci->ctl_page_to_phys = NULL; 568 edac_dbg(3, "init pvt\n"); 569 pvt = (struct i82975x_pvt *) mci->pvt_info; 570 pvt->mch_window = mch_window; 571 i82975x_init_csrows(mci, pdev, mch_window); 572 mci->scrub_mode = SCRUB_HW_SRC; 573 i82975x_get_error_info(mci, &discard); /* clear counters */ 574 575 /* finalize this instance of memory controller with edac core */ 576 if (edac_mc_add_mc(mci)) { 577 edac_dbg(3, "failed edac_mc_add_mc()\n"); 578 goto fail2; 579 } 580 581 /* get this far and it's successful */ 582 edac_dbg(3, "success\n"); 583 return 0; 584 585 fail2: 586 edac_mc_free(mci); 587 588 fail1: 589 iounmap(mch_window); 590 fail0: 591 return rc; 592 } 593 594 /* returns count (>= 0), or negative on error */ 595 static int i82975x_init_one(struct pci_dev *pdev, 596 const struct pci_device_id *ent) 597 { 598 int rc; 599 600 edac_dbg(0, "\n"); 601 602 if (pci_enable_device(pdev) < 0) 603 return -EIO; 604 605 rc = i82975x_probe1(pdev, ent->driver_data); 606 607 if (mci_pdev == NULL) 608 mci_pdev = pci_dev_get(pdev); 609 610 return rc; 611 } 612 613 static void i82975x_remove_one(struct pci_dev *pdev) 614 { 615 struct mem_ctl_info *mci; 616 struct i82975x_pvt *pvt; 617 618 edac_dbg(0, "\n"); 619 620 mci = edac_mc_del_mc(&pdev->dev); 621 if (mci == NULL) 622 return; 623 624 pvt = mci->pvt_info; 625 if (pvt->mch_window) 626 iounmap( pvt->mch_window ); 627 628 edac_mc_free(mci); 629 } 630 631 static const struct pci_device_id i82975x_pci_tbl[] = { 632 { 633 PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, 634 I82975X 635 }, 636 { 637 0, 638 } /* 0 terminated list. */ 639 }; 640 641 MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl); 642 643 static struct pci_driver i82975x_driver = { 644 .name = EDAC_MOD_STR, 645 .probe = i82975x_init_one, 646 .remove = i82975x_remove_one, 647 .id_table = i82975x_pci_tbl, 648 }; 649 650 static int __init i82975x_init(void) 651 { 652 int pci_rc; 653 654 edac_dbg(3, "\n"); 655 656 /* Ensure that the OPSTATE is set correctly for POLL or NMI */ 657 opstate_init(); 658 659 pci_rc = pci_register_driver(&i82975x_driver); 660 if (pci_rc < 0) 661 goto fail0; 662 663 if (mci_pdev == NULL) { 664 mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 665 PCI_DEVICE_ID_INTEL_82975_0, NULL); 666 667 if (!mci_pdev) { 668 edac_dbg(0, "i82975x pci_get_device fail\n"); 669 pci_rc = -ENODEV; 670 goto fail1; 671 } 672 673 pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl); 674 675 if (pci_rc < 0) { 676 edac_dbg(0, "i82975x init fail\n"); 677 pci_rc = -ENODEV; 678 goto fail1; 679 } 680 } 681 682 return 0; 683 684 fail1: 685 pci_unregister_driver(&i82975x_driver); 686 687 fail0: 688 pci_dev_put(mci_pdev); 689 return pci_rc; 690 } 691 692 static void __exit i82975x_exit(void) 693 { 694 edac_dbg(3, "\n"); 695 696 pci_unregister_driver(&i82975x_driver); 697 698 if (!i82975x_registered) { 699 i82975x_remove_one(mci_pdev); 700 pci_dev_put(mci_pdev); 701 } 702 } 703 704 module_init(i82975x_init); 705 module_exit(i82975x_exit); 706 707 MODULE_LICENSE("GPL"); 708 MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>"); 709 MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers"); 710 711 module_param(edac_op_state, int, 0444); 712 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); 713