1 /* 2 * driver/dma/ste_dma40_ll.h 3 * 4 * Copyright (C) ST-Ericsson 2007-2010 5 * License terms: GNU General Public License (GPL) version 2 6 * Author: Per Friden <per.friden@stericsson.com> 7 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> 8 */ 9 #ifndef STE_DMA40_LL_H 10 #define STE_DMA40_LL_H 11 12 #define D40_DREG_PCBASE 0x400 13 #define D40_DREG_PCDELTA (8 * 4) 14 #define D40_LLI_ALIGN 16 /* LLI alignment must be 16 bytes. */ 15 16 #define D40_LCPA_CHAN_SIZE 32 17 #define D40_LCPA_CHAN_DST_DELTA 16 18 19 #define D40_TYPE_TO_GROUP(type) (type / 16) 20 #define D40_TYPE_TO_EVENT(type) (type % 16) 21 22 /* Most bits of the CFG register are the same in log as in phy mode */ 23 #define D40_SREG_CFG_MST_POS 15 24 #define D40_SREG_CFG_TIM_POS 14 25 #define D40_SREG_CFG_EIM_POS 13 26 #define D40_SREG_CFG_LOG_INCR_POS 12 27 #define D40_SREG_CFG_PHY_PEN_POS 12 28 #define D40_SREG_CFG_PSIZE_POS 10 29 #define D40_SREG_CFG_ESIZE_POS 8 30 #define D40_SREG_CFG_PRI_POS 7 31 #define D40_SREG_CFG_LBE_POS 6 32 #define D40_SREG_CFG_LOG_GIM_POS 5 33 #define D40_SREG_CFG_LOG_MFU_POS 4 34 #define D40_SREG_CFG_PHY_TM_POS 4 35 #define D40_SREG_CFG_PHY_EVTL_POS 0 36 37 38 /* Standard channel parameters - basic mode (element register) */ 39 #define D40_SREG_ELEM_PHY_ECNT_POS 16 40 #define D40_SREG_ELEM_PHY_EIDX_POS 0 41 42 #define D40_SREG_ELEM_PHY_ECNT_MASK (0xFFFF << D40_SREG_ELEM_PHY_ECNT_POS) 43 44 /* Standard channel parameters - basic mode (Link register) */ 45 #define D40_SREG_LNK_PHY_TCP_POS 0 46 #define D40_SREG_LNK_PHY_LMP_POS 1 47 #define D40_SREG_LNK_PHY_PRE_POS 2 48 /* 49 * Source destination link address. Contains the 50 * 29-bit byte word aligned address of the reload area. 51 */ 52 #define D40_SREG_LNK_PHYS_LNK_MASK 0xFFFFFFF8UL 53 54 /* Standard basic channel logical mode */ 55 56 /* Element register */ 57 #define D40_SREG_ELEM_LOG_ECNT_POS 16 58 #define D40_SREG_ELEM_LOG_LIDX_POS 8 59 #define D40_SREG_ELEM_LOG_LOS_POS 1 60 #define D40_SREG_ELEM_LOG_TCP_POS 0 61 62 #define D40_SREG_ELEM_LOG_LIDX_MASK (0xFF << D40_SREG_ELEM_LOG_LIDX_POS) 63 64 /* Link register */ 65 #define D40_DEACTIVATE_EVENTLINE 0x0 66 #define D40_ACTIVATE_EVENTLINE 0x1 67 #define D40_EVENTLINE_POS(i) (2 * i) 68 #define D40_EVENTLINE_MASK(i) (0x3 << D40_EVENTLINE_POS(i)) 69 70 /* Standard basic channel logical params in memory */ 71 72 /* LCSP0 */ 73 #define D40_MEM_LCSP0_ECNT_POS 16 74 #define D40_MEM_LCSP0_SPTR_POS 0 75 76 #define D40_MEM_LCSP0_ECNT_MASK (0xFFFF << D40_MEM_LCSP0_ECNT_POS) 77 #define D40_MEM_LCSP0_SPTR_MASK (0xFFFF << D40_MEM_LCSP0_SPTR_POS) 78 79 /* LCSP1 */ 80 #define D40_MEM_LCSP1_SPTR_POS 16 81 #define D40_MEM_LCSP1_SCFG_MST_POS 15 82 #define D40_MEM_LCSP1_SCFG_TIM_POS 14 83 #define D40_MEM_LCSP1_SCFG_EIM_POS 13 84 #define D40_MEM_LCSP1_SCFG_INCR_POS 12 85 #define D40_MEM_LCSP1_SCFG_PSIZE_POS 10 86 #define D40_MEM_LCSP1_SCFG_ESIZE_POS 8 87 #define D40_MEM_LCSP1_SLOS_POS 1 88 #define D40_MEM_LCSP1_STCP_POS 0 89 90 #define D40_MEM_LCSP1_SPTR_MASK (0xFFFF << D40_MEM_LCSP1_SPTR_POS) 91 #define D40_MEM_LCSP1_SCFG_TIM_MASK (0x1 << D40_MEM_LCSP1_SCFG_TIM_POS) 92 #define D40_MEM_LCSP1_SCFG_INCR_MASK (0x1 << D40_MEM_LCSP1_SCFG_INCR_POS) 93 #define D40_MEM_LCSP1_SCFG_PSIZE_MASK (0x3 << D40_MEM_LCSP1_SCFG_PSIZE_POS) 94 #define D40_MEM_LCSP1_SLOS_MASK (0x7F << D40_MEM_LCSP1_SLOS_POS) 95 #define D40_MEM_LCSP1_STCP_MASK (0x1 << D40_MEM_LCSP1_STCP_POS) 96 97 /* LCSP2 */ 98 #define D40_MEM_LCSP2_ECNT_POS 16 99 100 #define D40_MEM_LCSP2_ECNT_MASK (0xFFFF << D40_MEM_LCSP2_ECNT_POS) 101 102 /* LCSP3 */ 103 #define D40_MEM_LCSP3_DCFG_MST_POS 15 104 #define D40_MEM_LCSP3_DCFG_TIM_POS 14 105 #define D40_MEM_LCSP3_DCFG_EIM_POS 13 106 #define D40_MEM_LCSP3_DCFG_INCR_POS 12 107 #define D40_MEM_LCSP3_DCFG_PSIZE_POS 10 108 #define D40_MEM_LCSP3_DCFG_ESIZE_POS 8 109 #define D40_MEM_LCSP3_DLOS_POS 1 110 #define D40_MEM_LCSP3_DTCP_POS 0 111 112 #define D40_MEM_LCSP3_DLOS_MASK (0x7F << D40_MEM_LCSP3_DLOS_POS) 113 #define D40_MEM_LCSP3_DTCP_MASK (0x1 << D40_MEM_LCSP3_DTCP_POS) 114 115 116 /* Standard channel parameter register offsets */ 117 #define D40_CHAN_REG_SSCFG 0x00 118 #define D40_CHAN_REG_SSELT 0x04 119 #define D40_CHAN_REG_SSPTR 0x08 120 #define D40_CHAN_REG_SSLNK 0x0C 121 #define D40_CHAN_REG_SDCFG 0x10 122 #define D40_CHAN_REG_SDELT 0x14 123 #define D40_CHAN_REG_SDPTR 0x18 124 #define D40_CHAN_REG_SDLNK 0x1C 125 126 /* DMA Register Offsets */ 127 #define D40_DREG_GCC 0x000 128 #define D40_DREG_PRTYP 0x004 129 #define D40_DREG_PRSME 0x008 130 #define D40_DREG_PRSMO 0x00C 131 #define D40_DREG_PRMSE 0x010 132 #define D40_DREG_PRMSO 0x014 133 #define D40_DREG_PRMOE 0x018 134 #define D40_DREG_PRMOO 0x01C 135 #define D40_DREG_LCPA 0x020 136 #define D40_DREG_LCLA 0x024 137 #define D40_DREG_ACTIVE 0x050 138 #define D40_DREG_ACTIVO 0x054 139 #define D40_DREG_FSEB1 0x058 140 #define D40_DREG_FSEB2 0x05C 141 #define D40_DREG_PCMIS 0x060 142 #define D40_DREG_PCICR 0x064 143 #define D40_DREG_PCTIS 0x068 144 #define D40_DREG_PCEIS 0x06C 145 #define D40_DREG_LCMIS0 0x080 146 #define D40_DREG_LCMIS1 0x084 147 #define D40_DREG_LCMIS2 0x088 148 #define D40_DREG_LCMIS3 0x08C 149 #define D40_DREG_LCICR0 0x090 150 #define D40_DREG_LCICR1 0x094 151 #define D40_DREG_LCICR2 0x098 152 #define D40_DREG_LCICR3 0x09C 153 #define D40_DREG_LCTIS0 0x0A0 154 #define D40_DREG_LCTIS1 0x0A4 155 #define D40_DREG_LCTIS2 0x0A8 156 #define D40_DREG_LCTIS3 0x0AC 157 #define D40_DREG_LCEIS0 0x0B0 158 #define D40_DREG_LCEIS1 0x0B4 159 #define D40_DREG_LCEIS2 0x0B8 160 #define D40_DREG_LCEIS3 0x0BC 161 #define D40_DREG_STFU 0xFC8 162 #define D40_DREG_ICFG 0xFCC 163 #define D40_DREG_PERIPHID0 0xFE0 164 #define D40_DREG_PERIPHID1 0xFE4 165 #define D40_DREG_PERIPHID2 0xFE8 166 #define D40_DREG_PERIPHID3 0xFEC 167 #define D40_DREG_CELLID0 0xFF0 168 #define D40_DREG_CELLID1 0xFF4 169 #define D40_DREG_CELLID2 0xFF8 170 #define D40_DREG_CELLID3 0xFFC 171 172 /* LLI related structures */ 173 174 /** 175 * struct d40_phy_lli - The basic configration register for each physical 176 * channel. 177 * 178 * @reg_cfg: The configuration register. 179 * @reg_elt: The element register. 180 * @reg_ptr: The pointer register. 181 * @reg_lnk: The link register. 182 * 183 * These registers are set up for both physical and logical transfers 184 * Note that the bit in each register means differently in logical and 185 * physical(standard) mode. 186 * 187 * This struct must be 16 bytes aligned, and only contain physical registers 188 * since it will be directly accessed by the DMA. 189 */ 190 struct d40_phy_lli { 191 u32 reg_cfg; 192 u32 reg_elt; 193 u32 reg_ptr; 194 u32 reg_lnk; 195 }; 196 197 /** 198 * struct d40_phy_lli_bidir - struct for a transfer. 199 * 200 * @src: Register settings for src channel. 201 * @dst: Register settings for dst channel. 202 * @dst_addr: Physical destination address. 203 * @src_addr: Physical source address. 204 * 205 * All DMA transfers have a source and a destination. 206 */ 207 208 struct d40_phy_lli_bidir { 209 struct d40_phy_lli *src; 210 struct d40_phy_lli *dst; 211 dma_addr_t dst_addr; 212 dma_addr_t src_addr; 213 }; 214 215 216 /** 217 * struct d40_log_lli - logical lli configuration 218 * 219 * @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst. 220 * @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst. 221 * 222 * This struct must be 8 bytes aligned since it will be accessed directy by 223 * the DMA. Never add any none hw mapped registers to this struct. 224 */ 225 226 struct d40_log_lli { 227 u32 lcsp02; 228 u32 lcsp13; 229 }; 230 231 /** 232 * struct d40_log_lli_bidir - For both src and dst 233 * 234 * @src: pointer to src lli configuration. 235 * @dst: pointer to dst lli configuration. 236 * 237 * You always have a src and a dst when doing DMA transfers. 238 */ 239 240 struct d40_log_lli_bidir { 241 struct d40_log_lli *src; 242 struct d40_log_lli *dst; 243 }; 244 245 /** 246 * struct d40_log_lli_full - LCPA layout 247 * 248 * @lcsp0: Logical Channel Standard Param 0 - Src. 249 * @lcsp1: Logical Channel Standard Param 1 - Src. 250 * @lcsp2: Logical Channel Standard Param 2 - Dst. 251 * @lcsp3: Logical Channel Standard Param 3 - Dst. 252 * 253 * This struct maps to LCPA physical memory layout. Must map to 254 * the hw. 255 */ 256 struct d40_log_lli_full { 257 u32 lcsp0; 258 u32 lcsp1; 259 u32 lcsp2; 260 u32 lcsp3; 261 }; 262 263 /** 264 * struct d40_def_lcsp - Default LCSP1 and LCSP3 settings 265 * 266 * @lcsp3: The default configuration for dst. 267 * @lcsp1: The default configuration for src. 268 */ 269 struct d40_def_lcsp { 270 u32 lcsp3; 271 u32 lcsp1; 272 }; 273 274 /** 275 * struct d40_lcla_elem - Info for one LCA element. 276 * 277 * @src_id: logical channel src id 278 * @dst_id: logical channel dst id 279 * @src: LCPA formated src parameters 280 * @dst: LCPA formated dst parameters 281 * 282 */ 283 struct d40_lcla_elem { 284 int src_id; 285 int dst_id; 286 struct d40_log_lli *src; 287 struct d40_log_lli *dst; 288 }; 289 290 /* Physical channels */ 291 292 void d40_phy_cfg(struct stedma40_chan_cfg *cfg, 293 u32 *src_cfg, u32 *dst_cfg, bool is_log); 294 295 void d40_log_cfg(struct stedma40_chan_cfg *cfg, 296 u32 *lcsp1, u32 *lcsp2); 297 298 int d40_phy_sg_to_lli(struct scatterlist *sg, 299 int sg_len, 300 dma_addr_t target, 301 struct d40_phy_lli *lli, 302 dma_addr_t lli_phys, 303 u32 reg_cfg, 304 u32 data_width, 305 int psize, 306 bool term_int); 307 308 int d40_phy_fill_lli(struct d40_phy_lli *lli, 309 dma_addr_t data, 310 u32 data_size, 311 int psize, 312 dma_addr_t next_lli, 313 u32 reg_cfg, 314 bool term_int, 315 u32 data_width, 316 bool is_device); 317 318 void d40_phy_lli_write(void __iomem *virtbase, 319 u32 phy_chan_num, 320 struct d40_phy_lli *lli_dst, 321 struct d40_phy_lli *lli_src); 322 323 /* Logical channels */ 324 325 void d40_log_fill_lli(struct d40_log_lli *lli, 326 dma_addr_t data, u32 data_size, 327 u32 lli_next_off, u32 reg_cfg, 328 u32 data_width, 329 bool term_int, bool addr_inc); 330 331 int d40_log_sg_to_dev(struct d40_lcla_elem *lcla, 332 struct scatterlist *sg, 333 int sg_len, 334 struct d40_log_lli_bidir *lli, 335 struct d40_def_lcsp *lcsp, 336 u32 src_data_width, 337 u32 dst_data_width, 338 enum dma_data_direction direction, 339 bool term_int, dma_addr_t dev_addr, int max_len, 340 int llis_per_log); 341 342 int d40_log_lli_write(struct d40_log_lli_full *lcpa, 343 struct d40_log_lli *lcla_src, 344 struct d40_log_lli *lcla_dst, 345 struct d40_log_lli *lli_dst, 346 struct d40_log_lli *lli_src, 347 int llis_per_log); 348 349 int d40_log_sg_to_lli(int lcla_id, 350 struct scatterlist *sg, 351 int sg_len, 352 struct d40_log_lli *lli_sg, 353 u32 lcsp13, /* src or dst*/ 354 u32 data_width, 355 bool term_int, int max_len, int llis_per_log); 356 357 #endif /* STE_DMA40_LLI_H */ 358