1 /* 2 * Copyright (C) Ericsson AB 2007-2008 3 * Copyright (C) ST-Ericsson SA 2008-2010 4 * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson 5 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson 6 * License terms: GNU General Public License (GPL) version 2 7 */ 8 9 #include <linux/dma-mapping.h> 10 #include <linux/kernel.h> 11 #include <linux/slab.h> 12 #include <linux/export.h> 13 #include <linux/dmaengine.h> 14 #include <linux/platform_device.h> 15 #include <linux/clk.h> 16 #include <linux/delay.h> 17 #include <linux/log2.h> 18 #include <linux/pm.h> 19 #include <linux/pm_runtime.h> 20 #include <linux/err.h> 21 #include <linux/of.h> 22 #include <linux/of_dma.h> 23 #include <linux/amba/bus.h> 24 #include <linux/regulator/consumer.h> 25 #include <linux/platform_data/dma-ste-dma40.h> 26 27 #include "dmaengine.h" 28 #include "ste_dma40_ll.h" 29 30 #define D40_NAME "dma40" 31 32 #define D40_PHY_CHAN -1 33 34 /* For masking out/in 2 bit channel positions */ 35 #define D40_CHAN_POS(chan) (2 * (chan / 2)) 36 #define D40_CHAN_POS_MASK(chan) (0x3 << D40_CHAN_POS(chan)) 37 38 /* Maximum iterations taken before giving up suspending a channel */ 39 #define D40_SUSPEND_MAX_IT 500 40 41 /* Milliseconds */ 42 #define DMA40_AUTOSUSPEND_DELAY 100 43 44 /* Hardware requirement on LCLA alignment */ 45 #define LCLA_ALIGNMENT 0x40000 46 47 /* Max number of links per event group */ 48 #define D40_LCLA_LINK_PER_EVENT_GRP 128 49 #define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP 50 51 /* Max number of logical channels per physical channel */ 52 #define D40_MAX_LOG_CHAN_PER_PHY 32 53 54 /* Attempts before giving up to trying to get pages that are aligned */ 55 #define MAX_LCLA_ALLOC_ATTEMPTS 256 56 57 /* Bit markings for allocation map */ 58 #define D40_ALLOC_FREE BIT(31) 59 #define D40_ALLOC_PHY BIT(30) 60 #define D40_ALLOC_LOG_FREE 0 61 62 #define D40_MEMCPY_MAX_CHANS 8 63 64 /* Reserved event lines for memcpy only. */ 65 #define DB8500_DMA_MEMCPY_EV_0 51 66 #define DB8500_DMA_MEMCPY_EV_1 56 67 #define DB8500_DMA_MEMCPY_EV_2 57 68 #define DB8500_DMA_MEMCPY_EV_3 58 69 #define DB8500_DMA_MEMCPY_EV_4 59 70 #define DB8500_DMA_MEMCPY_EV_5 60 71 72 static int dma40_memcpy_channels[] = { 73 DB8500_DMA_MEMCPY_EV_0, 74 DB8500_DMA_MEMCPY_EV_1, 75 DB8500_DMA_MEMCPY_EV_2, 76 DB8500_DMA_MEMCPY_EV_3, 77 DB8500_DMA_MEMCPY_EV_4, 78 DB8500_DMA_MEMCPY_EV_5, 79 }; 80 81 /* Default configuration for physcial memcpy */ 82 static struct stedma40_chan_cfg dma40_memcpy_conf_phy = { 83 .mode = STEDMA40_MODE_PHYSICAL, 84 .dir = DMA_MEM_TO_MEM, 85 86 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 87 .src_info.psize = STEDMA40_PSIZE_PHY_1, 88 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 89 90 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 91 .dst_info.psize = STEDMA40_PSIZE_PHY_1, 92 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 93 }; 94 95 /* Default configuration for logical memcpy */ 96 static struct stedma40_chan_cfg dma40_memcpy_conf_log = { 97 .mode = STEDMA40_MODE_LOGICAL, 98 .dir = DMA_MEM_TO_MEM, 99 100 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 101 .src_info.psize = STEDMA40_PSIZE_LOG_1, 102 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 103 104 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 105 .dst_info.psize = STEDMA40_PSIZE_LOG_1, 106 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 107 }; 108 109 /** 110 * enum 40_command - The different commands and/or statuses. 111 * 112 * @D40_DMA_STOP: DMA channel command STOP or status STOPPED, 113 * @D40_DMA_RUN: The DMA channel is RUNNING of the command RUN. 114 * @D40_DMA_SUSPEND_REQ: Request the DMA to SUSPEND as soon as possible. 115 * @D40_DMA_SUSPENDED: The DMA channel is SUSPENDED. 116 */ 117 enum d40_command { 118 D40_DMA_STOP = 0, 119 D40_DMA_RUN = 1, 120 D40_DMA_SUSPEND_REQ = 2, 121 D40_DMA_SUSPENDED = 3 122 }; 123 124 /* 125 * enum d40_events - The different Event Enables for the event lines. 126 * 127 * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan. 128 * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan. 129 * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line. 130 * @D40_ROUND_EVENTLINE: Status check for event line. 131 */ 132 133 enum d40_events { 134 D40_DEACTIVATE_EVENTLINE = 0, 135 D40_ACTIVATE_EVENTLINE = 1, 136 D40_SUSPEND_REQ_EVENTLINE = 2, 137 D40_ROUND_EVENTLINE = 3 138 }; 139 140 /* 141 * These are the registers that has to be saved and later restored 142 * when the DMA hw is powered off. 143 * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works. 144 */ 145 static u32 d40_backup_regs[] = { 146 D40_DREG_LCPA, 147 D40_DREG_LCLA, 148 D40_DREG_PRMSE, 149 D40_DREG_PRMSO, 150 D40_DREG_PRMOE, 151 D40_DREG_PRMOO, 152 }; 153 154 #define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs) 155 156 /* 157 * since 9540 and 8540 has the same HW revision 158 * use v4a for 9540 or ealier 159 * use v4b for 8540 or later 160 * HW revision: 161 * DB8500ed has revision 0 162 * DB8500v1 has revision 2 163 * DB8500v2 has revision 3 164 * AP9540v1 has revision 4 165 * DB8540v1 has revision 4 166 * TODO: Check if all these registers have to be saved/restored on dma40 v4a 167 */ 168 static u32 d40_backup_regs_v4a[] = { 169 D40_DREG_PSEG1, 170 D40_DREG_PSEG2, 171 D40_DREG_PSEG3, 172 D40_DREG_PSEG4, 173 D40_DREG_PCEG1, 174 D40_DREG_PCEG2, 175 D40_DREG_PCEG3, 176 D40_DREG_PCEG4, 177 D40_DREG_RSEG1, 178 D40_DREG_RSEG2, 179 D40_DREG_RSEG3, 180 D40_DREG_RSEG4, 181 D40_DREG_RCEG1, 182 D40_DREG_RCEG2, 183 D40_DREG_RCEG3, 184 D40_DREG_RCEG4, 185 }; 186 187 #define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a) 188 189 static u32 d40_backup_regs_v4b[] = { 190 D40_DREG_CPSEG1, 191 D40_DREG_CPSEG2, 192 D40_DREG_CPSEG3, 193 D40_DREG_CPSEG4, 194 D40_DREG_CPSEG5, 195 D40_DREG_CPCEG1, 196 D40_DREG_CPCEG2, 197 D40_DREG_CPCEG3, 198 D40_DREG_CPCEG4, 199 D40_DREG_CPCEG5, 200 D40_DREG_CRSEG1, 201 D40_DREG_CRSEG2, 202 D40_DREG_CRSEG3, 203 D40_DREG_CRSEG4, 204 D40_DREG_CRSEG5, 205 D40_DREG_CRCEG1, 206 D40_DREG_CRCEG2, 207 D40_DREG_CRCEG3, 208 D40_DREG_CRCEG4, 209 D40_DREG_CRCEG5, 210 }; 211 212 #define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b) 213 214 static u32 d40_backup_regs_chan[] = { 215 D40_CHAN_REG_SSCFG, 216 D40_CHAN_REG_SSELT, 217 D40_CHAN_REG_SSPTR, 218 D40_CHAN_REG_SSLNK, 219 D40_CHAN_REG_SDCFG, 220 D40_CHAN_REG_SDELT, 221 D40_CHAN_REG_SDPTR, 222 D40_CHAN_REG_SDLNK, 223 }; 224 225 #define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \ 226 BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B) 227 228 /** 229 * struct d40_interrupt_lookup - lookup table for interrupt handler 230 * 231 * @src: Interrupt mask register. 232 * @clr: Interrupt clear register. 233 * @is_error: true if this is an error interrupt. 234 * @offset: start delta in the lookup_log_chans in d40_base. If equals to 235 * D40_PHY_CHAN, the lookup_phy_chans shall be used instead. 236 */ 237 struct d40_interrupt_lookup { 238 u32 src; 239 u32 clr; 240 bool is_error; 241 int offset; 242 }; 243 244 245 static struct d40_interrupt_lookup il_v4a[] = { 246 {D40_DREG_LCTIS0, D40_DREG_LCICR0, false, 0}, 247 {D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32}, 248 {D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64}, 249 {D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96}, 250 {D40_DREG_LCEIS0, D40_DREG_LCICR0, true, 0}, 251 {D40_DREG_LCEIS1, D40_DREG_LCICR1, true, 32}, 252 {D40_DREG_LCEIS2, D40_DREG_LCICR2, true, 64}, 253 {D40_DREG_LCEIS3, D40_DREG_LCICR3, true, 96}, 254 {D40_DREG_PCTIS, D40_DREG_PCICR, false, D40_PHY_CHAN}, 255 {D40_DREG_PCEIS, D40_DREG_PCICR, true, D40_PHY_CHAN}, 256 }; 257 258 static struct d40_interrupt_lookup il_v4b[] = { 259 {D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false, 0}, 260 {D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32}, 261 {D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64}, 262 {D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96}, 263 {D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128}, 264 {D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true, 0}, 265 {D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true, 32}, 266 {D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true, 64}, 267 {D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true, 96}, 268 {D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true, 128}, 269 {D40_DREG_CPCTIS, D40_DREG_CPCICR, false, D40_PHY_CHAN}, 270 {D40_DREG_CPCEIS, D40_DREG_CPCICR, true, D40_PHY_CHAN}, 271 }; 272 273 /** 274 * struct d40_reg_val - simple lookup struct 275 * 276 * @reg: The register. 277 * @val: The value that belongs to the register in reg. 278 */ 279 struct d40_reg_val { 280 unsigned int reg; 281 unsigned int val; 282 }; 283 284 static __initdata struct d40_reg_val dma_init_reg_v4a[] = { 285 /* Clock every part of the DMA block from start */ 286 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL}, 287 288 /* Interrupts on all logical channels */ 289 { .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF}, 290 { .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF}, 291 { .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF}, 292 { .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF}, 293 { .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF}, 294 { .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF}, 295 { .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF}, 296 { .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF}, 297 { .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF}, 298 { .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF}, 299 { .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF}, 300 { .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF} 301 }; 302 static __initdata struct d40_reg_val dma_init_reg_v4b[] = { 303 /* Clock every part of the DMA block from start */ 304 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL}, 305 306 /* Interrupts on all logical channels */ 307 { .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF}, 308 { .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF}, 309 { .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF}, 310 { .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF}, 311 { .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF}, 312 { .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF}, 313 { .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF}, 314 { .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF}, 315 { .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF}, 316 { .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF}, 317 { .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF}, 318 { .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF}, 319 { .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF}, 320 { .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF}, 321 { .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF} 322 }; 323 324 /** 325 * struct d40_lli_pool - Structure for keeping LLIs in memory 326 * 327 * @base: Pointer to memory area when the pre_alloc_lli's are not large 328 * enough, IE bigger than the most common case, 1 dst and 1 src. NULL if 329 * pre_alloc_lli is used. 330 * @dma_addr: DMA address, if mapped 331 * @size: The size in bytes of the memory at base or the size of pre_alloc_lli. 332 * @pre_alloc_lli: Pre allocated area for the most common case of transfers, 333 * one buffer to one buffer. 334 */ 335 struct d40_lli_pool { 336 void *base; 337 int size; 338 dma_addr_t dma_addr; 339 /* Space for dst and src, plus an extra for padding */ 340 u8 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)]; 341 }; 342 343 /** 344 * struct d40_desc - A descriptor is one DMA job. 345 * 346 * @lli_phy: LLI settings for physical channel. Both src and dst= 347 * points into the lli_pool, to base if lli_len > 1 or to pre_alloc_lli if 348 * lli_len equals one. 349 * @lli_log: Same as above but for logical channels. 350 * @lli_pool: The pool with two entries pre-allocated. 351 * @lli_len: Number of llis of current descriptor. 352 * @lli_current: Number of transferred llis. 353 * @lcla_alloc: Number of LCLA entries allocated. 354 * @txd: DMA engine struct. Used for among other things for communication 355 * during a transfer. 356 * @node: List entry. 357 * @is_in_client_list: true if the client owns this descriptor. 358 * @cyclic: true if this is a cyclic job 359 * 360 * This descriptor is used for both logical and physical transfers. 361 */ 362 struct d40_desc { 363 /* LLI physical */ 364 struct d40_phy_lli_bidir lli_phy; 365 /* LLI logical */ 366 struct d40_log_lli_bidir lli_log; 367 368 struct d40_lli_pool lli_pool; 369 int lli_len; 370 int lli_current; 371 int lcla_alloc; 372 373 struct dma_async_tx_descriptor txd; 374 struct list_head node; 375 376 bool is_in_client_list; 377 bool cyclic; 378 }; 379 380 /** 381 * struct d40_lcla_pool - LCLA pool settings and data. 382 * 383 * @base: The virtual address of LCLA. 18 bit aligned. 384 * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used. 385 * This pointer is only there for clean-up on error. 386 * @pages: The number of pages needed for all physical channels. 387 * Only used later for clean-up on error 388 * @lock: Lock to protect the content in this struct. 389 * @alloc_map: big map over which LCLA entry is own by which job. 390 */ 391 struct d40_lcla_pool { 392 void *base; 393 dma_addr_t dma_addr; 394 void *base_unaligned; 395 int pages; 396 spinlock_t lock; 397 struct d40_desc **alloc_map; 398 }; 399 400 /** 401 * struct d40_phy_res - struct for handling eventlines mapped to physical 402 * channels. 403 * 404 * @lock: A lock protection this entity. 405 * @reserved: True if used by secure world or otherwise. 406 * @num: The physical channel number of this entity. 407 * @allocated_src: Bit mapped to show which src event line's are mapped to 408 * this physical channel. Can also be free or physically allocated. 409 * @allocated_dst: Same as for src but is dst. 410 * allocated_dst and allocated_src uses the D40_ALLOC* defines as well as 411 * event line number. 412 * @use_soft_lli: To mark if the linked lists of channel are managed by SW. 413 */ 414 struct d40_phy_res { 415 spinlock_t lock; 416 bool reserved; 417 int num; 418 u32 allocated_src; 419 u32 allocated_dst; 420 bool use_soft_lli; 421 }; 422 423 struct d40_base; 424 425 /** 426 * struct d40_chan - Struct that describes a channel. 427 * 428 * @lock: A spinlock to protect this struct. 429 * @log_num: The logical number, if any of this channel. 430 * @pending_tx: The number of pending transfers. Used between interrupt handler 431 * and tasklet. 432 * @busy: Set to true when transfer is ongoing on this channel. 433 * @phy_chan: Pointer to physical channel which this instance runs on. If this 434 * point is NULL, then the channel is not allocated. 435 * @chan: DMA engine handle. 436 * @tasklet: Tasklet that gets scheduled from interrupt context to complete a 437 * transfer and call client callback. 438 * @client: Cliented owned descriptor list. 439 * @pending_queue: Submitted jobs, to be issued by issue_pending() 440 * @active: Active descriptor. 441 * @done: Completed jobs 442 * @queue: Queued jobs. 443 * @prepare_queue: Prepared jobs. 444 * @dma_cfg: The client configuration of this dma channel. 445 * @configured: whether the dma_cfg configuration is valid 446 * @base: Pointer to the device instance struct. 447 * @src_def_cfg: Default cfg register setting for src. 448 * @dst_def_cfg: Default cfg register setting for dst. 449 * @log_def: Default logical channel settings. 450 * @lcpa: Pointer to dst and src lcpa settings. 451 * @runtime_addr: runtime configured address. 452 * @runtime_direction: runtime configured direction. 453 * 454 * This struct can either "be" a logical or a physical channel. 455 */ 456 struct d40_chan { 457 spinlock_t lock; 458 int log_num; 459 int pending_tx; 460 bool busy; 461 struct d40_phy_res *phy_chan; 462 struct dma_chan chan; 463 struct tasklet_struct tasklet; 464 struct list_head client; 465 struct list_head pending_queue; 466 struct list_head active; 467 struct list_head done; 468 struct list_head queue; 469 struct list_head prepare_queue; 470 struct stedma40_chan_cfg dma_cfg; 471 bool configured; 472 struct d40_base *base; 473 /* Default register configurations */ 474 u32 src_def_cfg; 475 u32 dst_def_cfg; 476 struct d40_def_lcsp log_def; 477 struct d40_log_lli_full *lcpa; 478 /* Runtime reconfiguration */ 479 dma_addr_t runtime_addr; 480 enum dma_transfer_direction runtime_direction; 481 }; 482 483 /** 484 * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA 485 * controller 486 * 487 * @backup: the pointer to the registers address array for backup 488 * @backup_size: the size of the registers address array for backup 489 * @realtime_en: the realtime enable register 490 * @realtime_clear: the realtime clear register 491 * @high_prio_en: the high priority enable register 492 * @high_prio_clear: the high priority clear register 493 * @interrupt_en: the interrupt enable register 494 * @interrupt_clear: the interrupt clear register 495 * @il: the pointer to struct d40_interrupt_lookup 496 * @il_size: the size of d40_interrupt_lookup array 497 * @init_reg: the pointer to the struct d40_reg_val 498 * @init_reg_size: the size of d40_reg_val array 499 */ 500 struct d40_gen_dmac { 501 u32 *backup; 502 u32 backup_size; 503 u32 realtime_en; 504 u32 realtime_clear; 505 u32 high_prio_en; 506 u32 high_prio_clear; 507 u32 interrupt_en; 508 u32 interrupt_clear; 509 struct d40_interrupt_lookup *il; 510 u32 il_size; 511 struct d40_reg_val *init_reg; 512 u32 init_reg_size; 513 }; 514 515 /** 516 * struct d40_base - The big global struct, one for each probe'd instance. 517 * 518 * @interrupt_lock: Lock used to make sure one interrupt is handle a time. 519 * @execmd_lock: Lock for execute command usage since several channels share 520 * the same physical register. 521 * @dev: The device structure. 522 * @virtbase: The virtual base address of the DMA's register. 523 * @rev: silicon revision detected. 524 * @clk: Pointer to the DMA clock structure. 525 * @phy_start: Physical memory start of the DMA registers. 526 * @phy_size: Size of the DMA register map. 527 * @irq: The IRQ number. 528 * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem 529 * transfers). 530 * @num_phy_chans: The number of physical channels. Read from HW. This 531 * is the number of available channels for this driver, not counting "Secure 532 * mode" allocated physical channels. 533 * @num_log_chans: The number of logical channels. Calculated from 534 * num_phy_chans. 535 * @dma_both: dma_device channels that can do both memcpy and slave transfers. 536 * @dma_slave: dma_device channels that can do only do slave transfers. 537 * @dma_memcpy: dma_device channels that can do only do memcpy transfers. 538 * @phy_chans: Room for all possible physical channels in system. 539 * @log_chans: Room for all possible logical channels in system. 540 * @lookup_log_chans: Used to map interrupt number to logical channel. Points 541 * to log_chans entries. 542 * @lookup_phy_chans: Used to map interrupt number to physical channel. Points 543 * to phy_chans entries. 544 * @plat_data: Pointer to provided platform_data which is the driver 545 * configuration. 546 * @lcpa_regulator: Pointer to hold the regulator for the esram bank for lcla. 547 * @phy_res: Vector containing all physical channels. 548 * @lcla_pool: lcla pool settings and data. 549 * @lcpa_base: The virtual mapped address of LCPA. 550 * @phy_lcpa: The physical address of the LCPA. 551 * @lcpa_size: The size of the LCPA area. 552 * @desc_slab: cache for descriptors. 553 * @reg_val_backup: Here the values of some hardware registers are stored 554 * before the DMA is powered off. They are restored when the power is back on. 555 * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and 556 * later 557 * @reg_val_backup_chan: Backup data for standard channel parameter registers. 558 * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off. 559 * @gen_dmac: the struct for generic registers values to represent u8500/8540 560 * DMA controller 561 */ 562 struct d40_base { 563 spinlock_t interrupt_lock; 564 spinlock_t execmd_lock; 565 struct device *dev; 566 void __iomem *virtbase; 567 u8 rev:4; 568 struct clk *clk; 569 phys_addr_t phy_start; 570 resource_size_t phy_size; 571 int irq; 572 int num_memcpy_chans; 573 int num_phy_chans; 574 int num_log_chans; 575 struct device_dma_parameters dma_parms; 576 struct dma_device dma_both; 577 struct dma_device dma_slave; 578 struct dma_device dma_memcpy; 579 struct d40_chan *phy_chans; 580 struct d40_chan *log_chans; 581 struct d40_chan **lookup_log_chans; 582 struct d40_chan **lookup_phy_chans; 583 struct stedma40_platform_data *plat_data; 584 struct regulator *lcpa_regulator; 585 /* Physical half channels */ 586 struct d40_phy_res *phy_res; 587 struct d40_lcla_pool lcla_pool; 588 void *lcpa_base; 589 dma_addr_t phy_lcpa; 590 resource_size_t lcpa_size; 591 struct kmem_cache *desc_slab; 592 u32 reg_val_backup[BACKUP_REGS_SZ]; 593 u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX]; 594 u32 *reg_val_backup_chan; 595 u16 gcc_pwr_off_mask; 596 struct d40_gen_dmac gen_dmac; 597 }; 598 599 static struct device *chan2dev(struct d40_chan *d40c) 600 { 601 return &d40c->chan.dev->device; 602 } 603 604 static bool chan_is_physical(struct d40_chan *chan) 605 { 606 return chan->log_num == D40_PHY_CHAN; 607 } 608 609 static bool chan_is_logical(struct d40_chan *chan) 610 { 611 return !chan_is_physical(chan); 612 } 613 614 static void __iomem *chan_base(struct d40_chan *chan) 615 { 616 return chan->base->virtbase + D40_DREG_PCBASE + 617 chan->phy_chan->num * D40_DREG_PCDELTA; 618 } 619 620 #define d40_err(dev, format, arg...) \ 621 dev_err(dev, "[%s] " format, __func__, ## arg) 622 623 #define chan_err(d40c, format, arg...) \ 624 d40_err(chan2dev(d40c), format, ## arg) 625 626 static int d40_pool_lli_alloc(struct d40_chan *d40c, struct d40_desc *d40d, 627 int lli_len) 628 { 629 bool is_log = chan_is_logical(d40c); 630 u32 align; 631 void *base; 632 633 if (is_log) 634 align = sizeof(struct d40_log_lli); 635 else 636 align = sizeof(struct d40_phy_lli); 637 638 if (lli_len == 1) { 639 base = d40d->lli_pool.pre_alloc_lli; 640 d40d->lli_pool.size = sizeof(d40d->lli_pool.pre_alloc_lli); 641 d40d->lli_pool.base = NULL; 642 } else { 643 d40d->lli_pool.size = lli_len * 2 * align; 644 645 base = kmalloc(d40d->lli_pool.size + align, GFP_NOWAIT); 646 d40d->lli_pool.base = base; 647 648 if (d40d->lli_pool.base == NULL) 649 return -ENOMEM; 650 } 651 652 if (is_log) { 653 d40d->lli_log.src = PTR_ALIGN(base, align); 654 d40d->lli_log.dst = d40d->lli_log.src + lli_len; 655 656 d40d->lli_pool.dma_addr = 0; 657 } else { 658 d40d->lli_phy.src = PTR_ALIGN(base, align); 659 d40d->lli_phy.dst = d40d->lli_phy.src + lli_len; 660 661 d40d->lli_pool.dma_addr = dma_map_single(d40c->base->dev, 662 d40d->lli_phy.src, 663 d40d->lli_pool.size, 664 DMA_TO_DEVICE); 665 666 if (dma_mapping_error(d40c->base->dev, 667 d40d->lli_pool.dma_addr)) { 668 kfree(d40d->lli_pool.base); 669 d40d->lli_pool.base = NULL; 670 d40d->lli_pool.dma_addr = 0; 671 return -ENOMEM; 672 } 673 } 674 675 return 0; 676 } 677 678 static void d40_pool_lli_free(struct d40_chan *d40c, struct d40_desc *d40d) 679 { 680 if (d40d->lli_pool.dma_addr) 681 dma_unmap_single(d40c->base->dev, d40d->lli_pool.dma_addr, 682 d40d->lli_pool.size, DMA_TO_DEVICE); 683 684 kfree(d40d->lli_pool.base); 685 d40d->lli_pool.base = NULL; 686 d40d->lli_pool.size = 0; 687 d40d->lli_log.src = NULL; 688 d40d->lli_log.dst = NULL; 689 d40d->lli_phy.src = NULL; 690 d40d->lli_phy.dst = NULL; 691 } 692 693 static int d40_lcla_alloc_one(struct d40_chan *d40c, 694 struct d40_desc *d40d) 695 { 696 unsigned long flags; 697 int i; 698 int ret = -EINVAL; 699 700 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags); 701 702 /* 703 * Allocate both src and dst at the same time, therefore the half 704 * start on 1 since 0 can't be used since zero is used as end marker. 705 */ 706 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) { 707 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i; 708 709 if (!d40c->base->lcla_pool.alloc_map[idx]) { 710 d40c->base->lcla_pool.alloc_map[idx] = d40d; 711 d40d->lcla_alloc++; 712 ret = i; 713 break; 714 } 715 } 716 717 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); 718 719 return ret; 720 } 721 722 static int d40_lcla_free_all(struct d40_chan *d40c, 723 struct d40_desc *d40d) 724 { 725 unsigned long flags; 726 int i; 727 int ret = -EINVAL; 728 729 if (chan_is_physical(d40c)) 730 return 0; 731 732 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags); 733 734 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) { 735 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i; 736 737 if (d40c->base->lcla_pool.alloc_map[idx] == d40d) { 738 d40c->base->lcla_pool.alloc_map[idx] = NULL; 739 d40d->lcla_alloc--; 740 if (d40d->lcla_alloc == 0) { 741 ret = 0; 742 break; 743 } 744 } 745 } 746 747 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); 748 749 return ret; 750 751 } 752 753 static void d40_desc_remove(struct d40_desc *d40d) 754 { 755 list_del(&d40d->node); 756 } 757 758 static struct d40_desc *d40_desc_get(struct d40_chan *d40c) 759 { 760 struct d40_desc *desc = NULL; 761 762 if (!list_empty(&d40c->client)) { 763 struct d40_desc *d; 764 struct d40_desc *_d; 765 766 list_for_each_entry_safe(d, _d, &d40c->client, node) { 767 if (async_tx_test_ack(&d->txd)) { 768 d40_desc_remove(d); 769 desc = d; 770 memset(desc, 0, sizeof(*desc)); 771 break; 772 } 773 } 774 } 775 776 if (!desc) 777 desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT); 778 779 if (desc) 780 INIT_LIST_HEAD(&desc->node); 781 782 return desc; 783 } 784 785 static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d) 786 { 787 788 d40_pool_lli_free(d40c, d40d); 789 d40_lcla_free_all(d40c, d40d); 790 kmem_cache_free(d40c->base->desc_slab, d40d); 791 } 792 793 static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc) 794 { 795 list_add_tail(&desc->node, &d40c->active); 796 } 797 798 static void d40_phy_lli_load(struct d40_chan *chan, struct d40_desc *desc) 799 { 800 struct d40_phy_lli *lli_dst = desc->lli_phy.dst; 801 struct d40_phy_lli *lli_src = desc->lli_phy.src; 802 void __iomem *base = chan_base(chan); 803 804 writel(lli_src->reg_cfg, base + D40_CHAN_REG_SSCFG); 805 writel(lli_src->reg_elt, base + D40_CHAN_REG_SSELT); 806 writel(lli_src->reg_ptr, base + D40_CHAN_REG_SSPTR); 807 writel(lli_src->reg_lnk, base + D40_CHAN_REG_SSLNK); 808 809 writel(lli_dst->reg_cfg, base + D40_CHAN_REG_SDCFG); 810 writel(lli_dst->reg_elt, base + D40_CHAN_REG_SDELT); 811 writel(lli_dst->reg_ptr, base + D40_CHAN_REG_SDPTR); 812 writel(lli_dst->reg_lnk, base + D40_CHAN_REG_SDLNK); 813 } 814 815 static void d40_desc_done(struct d40_chan *d40c, struct d40_desc *desc) 816 { 817 list_add_tail(&desc->node, &d40c->done); 818 } 819 820 static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc) 821 { 822 struct d40_lcla_pool *pool = &chan->base->lcla_pool; 823 struct d40_log_lli_bidir *lli = &desc->lli_log; 824 int lli_current = desc->lli_current; 825 int lli_len = desc->lli_len; 826 bool cyclic = desc->cyclic; 827 int curr_lcla = -EINVAL; 828 int first_lcla = 0; 829 bool use_esram_lcla = chan->base->plat_data->use_esram_lcla; 830 bool linkback; 831 832 /* 833 * We may have partially running cyclic transfers, in case we did't get 834 * enough LCLA entries. 835 */ 836 linkback = cyclic && lli_current == 0; 837 838 /* 839 * For linkback, we need one LCLA even with only one link, because we 840 * can't link back to the one in LCPA space 841 */ 842 if (linkback || (lli_len - lli_current > 1)) { 843 /* 844 * If the channel is expected to use only soft_lli don't 845 * allocate a lcla. This is to avoid a HW issue that exists 846 * in some controller during a peripheral to memory transfer 847 * that uses linked lists. 848 */ 849 if (!(chan->phy_chan->use_soft_lli && 850 chan->dma_cfg.dir == DMA_DEV_TO_MEM)) 851 curr_lcla = d40_lcla_alloc_one(chan, desc); 852 853 first_lcla = curr_lcla; 854 } 855 856 /* 857 * For linkback, we normally load the LCPA in the loop since we need to 858 * link it to the second LCLA and not the first. However, if we 859 * couldn't even get a first LCLA, then we have to run in LCPA and 860 * reload manually. 861 */ 862 if (!linkback || curr_lcla == -EINVAL) { 863 unsigned int flags = 0; 864 865 if (curr_lcla == -EINVAL) 866 flags |= LLI_TERM_INT; 867 868 d40_log_lli_lcpa_write(chan->lcpa, 869 &lli->dst[lli_current], 870 &lli->src[lli_current], 871 curr_lcla, 872 flags); 873 lli_current++; 874 } 875 876 if (curr_lcla < 0) 877 goto out; 878 879 for (; lli_current < lli_len; lli_current++) { 880 unsigned int lcla_offset = chan->phy_chan->num * 1024 + 881 8 * curr_lcla * 2; 882 struct d40_log_lli *lcla = pool->base + lcla_offset; 883 unsigned int flags = 0; 884 int next_lcla; 885 886 if (lli_current + 1 < lli_len) 887 next_lcla = d40_lcla_alloc_one(chan, desc); 888 else 889 next_lcla = linkback ? first_lcla : -EINVAL; 890 891 if (cyclic || next_lcla == -EINVAL) 892 flags |= LLI_TERM_INT; 893 894 if (linkback && curr_lcla == first_lcla) { 895 /* First link goes in both LCPA and LCLA */ 896 d40_log_lli_lcpa_write(chan->lcpa, 897 &lli->dst[lli_current], 898 &lli->src[lli_current], 899 next_lcla, flags); 900 } 901 902 /* 903 * One unused LCLA in the cyclic case if the very first 904 * next_lcla fails... 905 */ 906 d40_log_lli_lcla_write(lcla, 907 &lli->dst[lli_current], 908 &lli->src[lli_current], 909 next_lcla, flags); 910 911 /* 912 * Cache maintenance is not needed if lcla is 913 * mapped in esram 914 */ 915 if (!use_esram_lcla) { 916 dma_sync_single_range_for_device(chan->base->dev, 917 pool->dma_addr, lcla_offset, 918 2 * sizeof(struct d40_log_lli), 919 DMA_TO_DEVICE); 920 } 921 curr_lcla = next_lcla; 922 923 if (curr_lcla == -EINVAL || curr_lcla == first_lcla) { 924 lli_current++; 925 break; 926 } 927 } 928 929 out: 930 desc->lli_current = lli_current; 931 } 932 933 static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d) 934 { 935 if (chan_is_physical(d40c)) { 936 d40_phy_lli_load(d40c, d40d); 937 d40d->lli_current = d40d->lli_len; 938 } else 939 d40_log_lli_to_lcxa(d40c, d40d); 940 } 941 942 static struct d40_desc *d40_first_active_get(struct d40_chan *d40c) 943 { 944 struct d40_desc *d; 945 946 if (list_empty(&d40c->active)) 947 return NULL; 948 949 d = list_first_entry(&d40c->active, 950 struct d40_desc, 951 node); 952 return d; 953 } 954 955 /* remove desc from current queue and add it to the pending_queue */ 956 static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc) 957 { 958 d40_desc_remove(desc); 959 desc->is_in_client_list = false; 960 list_add_tail(&desc->node, &d40c->pending_queue); 961 } 962 963 static struct d40_desc *d40_first_pending(struct d40_chan *d40c) 964 { 965 struct d40_desc *d; 966 967 if (list_empty(&d40c->pending_queue)) 968 return NULL; 969 970 d = list_first_entry(&d40c->pending_queue, 971 struct d40_desc, 972 node); 973 return d; 974 } 975 976 static struct d40_desc *d40_first_queued(struct d40_chan *d40c) 977 { 978 struct d40_desc *d; 979 980 if (list_empty(&d40c->queue)) 981 return NULL; 982 983 d = list_first_entry(&d40c->queue, 984 struct d40_desc, 985 node); 986 return d; 987 } 988 989 static struct d40_desc *d40_first_done(struct d40_chan *d40c) 990 { 991 if (list_empty(&d40c->done)) 992 return NULL; 993 994 return list_first_entry(&d40c->done, struct d40_desc, node); 995 } 996 997 static int d40_psize_2_burst_size(bool is_log, int psize) 998 { 999 if (is_log) { 1000 if (psize == STEDMA40_PSIZE_LOG_1) 1001 return 1; 1002 } else { 1003 if (psize == STEDMA40_PSIZE_PHY_1) 1004 return 1; 1005 } 1006 1007 return 2 << psize; 1008 } 1009 1010 /* 1011 * The dma only supports transmitting packages up to 1012 * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes. 1013 * 1014 * Calculate the total number of dma elements required to send the entire sg list. 1015 */ 1016 static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2) 1017 { 1018 int dmalen; 1019 u32 max_w = max(data_width1, data_width2); 1020 u32 min_w = min(data_width1, data_width2); 1021 u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w); 1022 1023 if (seg_max > STEDMA40_MAX_SEG_SIZE) 1024 seg_max -= max_w; 1025 1026 if (!IS_ALIGNED(size, max_w)) 1027 return -EINVAL; 1028 1029 if (size <= seg_max) 1030 dmalen = 1; 1031 else { 1032 dmalen = size / seg_max; 1033 if (dmalen * seg_max < size) 1034 dmalen++; 1035 } 1036 return dmalen; 1037 } 1038 1039 static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len, 1040 u32 data_width1, u32 data_width2) 1041 { 1042 struct scatterlist *sg; 1043 int i; 1044 int len = 0; 1045 int ret; 1046 1047 for_each_sg(sgl, sg, sg_len, i) { 1048 ret = d40_size_2_dmalen(sg_dma_len(sg), 1049 data_width1, data_width2); 1050 if (ret < 0) 1051 return ret; 1052 len += ret; 1053 } 1054 return len; 1055 } 1056 1057 static int __d40_execute_command_phy(struct d40_chan *d40c, 1058 enum d40_command command) 1059 { 1060 u32 status; 1061 int i; 1062 void __iomem *active_reg; 1063 int ret = 0; 1064 unsigned long flags; 1065 u32 wmask; 1066 1067 if (command == D40_DMA_STOP) { 1068 ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ); 1069 if (ret) 1070 return ret; 1071 } 1072 1073 spin_lock_irqsave(&d40c->base->execmd_lock, flags); 1074 1075 if (d40c->phy_chan->num % 2 == 0) 1076 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; 1077 else 1078 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; 1079 1080 if (command == D40_DMA_SUSPEND_REQ) { 1081 status = (readl(active_reg) & 1082 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 1083 D40_CHAN_POS(d40c->phy_chan->num); 1084 1085 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP) 1086 goto done; 1087 } 1088 1089 wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num)); 1090 writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)), 1091 active_reg); 1092 1093 if (command == D40_DMA_SUSPEND_REQ) { 1094 1095 for (i = 0 ; i < D40_SUSPEND_MAX_IT; i++) { 1096 status = (readl(active_reg) & 1097 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 1098 D40_CHAN_POS(d40c->phy_chan->num); 1099 1100 cpu_relax(); 1101 /* 1102 * Reduce the number of bus accesses while 1103 * waiting for the DMA to suspend. 1104 */ 1105 udelay(3); 1106 1107 if (status == D40_DMA_STOP || 1108 status == D40_DMA_SUSPENDED) 1109 break; 1110 } 1111 1112 if (i == D40_SUSPEND_MAX_IT) { 1113 chan_err(d40c, 1114 "unable to suspend the chl %d (log: %d) status %x\n", 1115 d40c->phy_chan->num, d40c->log_num, 1116 status); 1117 dump_stack(); 1118 ret = -EBUSY; 1119 } 1120 1121 } 1122 done: 1123 spin_unlock_irqrestore(&d40c->base->execmd_lock, flags); 1124 return ret; 1125 } 1126 1127 static void d40_term_all(struct d40_chan *d40c) 1128 { 1129 struct d40_desc *d40d; 1130 struct d40_desc *_d; 1131 1132 /* Release completed descriptors */ 1133 while ((d40d = d40_first_done(d40c))) { 1134 d40_desc_remove(d40d); 1135 d40_desc_free(d40c, d40d); 1136 } 1137 1138 /* Release active descriptors */ 1139 while ((d40d = d40_first_active_get(d40c))) { 1140 d40_desc_remove(d40d); 1141 d40_desc_free(d40c, d40d); 1142 } 1143 1144 /* Release queued descriptors waiting for transfer */ 1145 while ((d40d = d40_first_queued(d40c))) { 1146 d40_desc_remove(d40d); 1147 d40_desc_free(d40c, d40d); 1148 } 1149 1150 /* Release pending descriptors */ 1151 while ((d40d = d40_first_pending(d40c))) { 1152 d40_desc_remove(d40d); 1153 d40_desc_free(d40c, d40d); 1154 } 1155 1156 /* Release client owned descriptors */ 1157 if (!list_empty(&d40c->client)) 1158 list_for_each_entry_safe(d40d, _d, &d40c->client, node) { 1159 d40_desc_remove(d40d); 1160 d40_desc_free(d40c, d40d); 1161 } 1162 1163 /* Release descriptors in prepare queue */ 1164 if (!list_empty(&d40c->prepare_queue)) 1165 list_for_each_entry_safe(d40d, _d, 1166 &d40c->prepare_queue, node) { 1167 d40_desc_remove(d40d); 1168 d40_desc_free(d40c, d40d); 1169 } 1170 1171 d40c->pending_tx = 0; 1172 } 1173 1174 static void __d40_config_set_event(struct d40_chan *d40c, 1175 enum d40_events event_type, u32 event, 1176 int reg) 1177 { 1178 void __iomem *addr = chan_base(d40c) + reg; 1179 int tries; 1180 u32 status; 1181 1182 switch (event_type) { 1183 1184 case D40_DEACTIVATE_EVENTLINE: 1185 1186 writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) 1187 | ~D40_EVENTLINE_MASK(event), addr); 1188 break; 1189 1190 case D40_SUSPEND_REQ_EVENTLINE: 1191 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> 1192 D40_EVENTLINE_POS(event); 1193 1194 if (status == D40_DEACTIVATE_EVENTLINE || 1195 status == D40_SUSPEND_REQ_EVENTLINE) 1196 break; 1197 1198 writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event)) 1199 | ~D40_EVENTLINE_MASK(event), addr); 1200 1201 for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) { 1202 1203 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> 1204 D40_EVENTLINE_POS(event); 1205 1206 cpu_relax(); 1207 /* 1208 * Reduce the number of bus accesses while 1209 * waiting for the DMA to suspend. 1210 */ 1211 udelay(3); 1212 1213 if (status == D40_DEACTIVATE_EVENTLINE) 1214 break; 1215 } 1216 1217 if (tries == D40_SUSPEND_MAX_IT) { 1218 chan_err(d40c, 1219 "unable to stop the event_line chl %d (log: %d)" 1220 "status %x\n", d40c->phy_chan->num, 1221 d40c->log_num, status); 1222 } 1223 break; 1224 1225 case D40_ACTIVATE_EVENTLINE: 1226 /* 1227 * The hardware sometimes doesn't register the enable when src and dst 1228 * event lines are active on the same logical channel. Retry to ensure 1229 * it does. Usually only one retry is sufficient. 1230 */ 1231 tries = 100; 1232 while (--tries) { 1233 writel((D40_ACTIVATE_EVENTLINE << 1234 D40_EVENTLINE_POS(event)) | 1235 ~D40_EVENTLINE_MASK(event), addr); 1236 1237 if (readl(addr) & D40_EVENTLINE_MASK(event)) 1238 break; 1239 } 1240 1241 if (tries != 99) 1242 dev_dbg(chan2dev(d40c), 1243 "[%s] workaround enable S%cLNK (%d tries)\n", 1244 __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D', 1245 100 - tries); 1246 1247 WARN_ON(!tries); 1248 break; 1249 1250 case D40_ROUND_EVENTLINE: 1251 BUG(); 1252 break; 1253 1254 } 1255 } 1256 1257 static void d40_config_set_event(struct d40_chan *d40c, 1258 enum d40_events event_type) 1259 { 1260 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); 1261 1262 /* Enable event line connected to device (or memcpy) */ 1263 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || 1264 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) 1265 __d40_config_set_event(d40c, event_type, event, 1266 D40_CHAN_REG_SSLNK); 1267 1268 if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM) 1269 __d40_config_set_event(d40c, event_type, event, 1270 D40_CHAN_REG_SDLNK); 1271 } 1272 1273 static u32 d40_chan_has_events(struct d40_chan *d40c) 1274 { 1275 void __iomem *chanbase = chan_base(d40c); 1276 u32 val; 1277 1278 val = readl(chanbase + D40_CHAN_REG_SSLNK); 1279 val |= readl(chanbase + D40_CHAN_REG_SDLNK); 1280 1281 return val; 1282 } 1283 1284 static int 1285 __d40_execute_command_log(struct d40_chan *d40c, enum d40_command command) 1286 { 1287 unsigned long flags; 1288 int ret = 0; 1289 u32 active_status; 1290 void __iomem *active_reg; 1291 1292 if (d40c->phy_chan->num % 2 == 0) 1293 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; 1294 else 1295 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; 1296 1297 1298 spin_lock_irqsave(&d40c->phy_chan->lock, flags); 1299 1300 switch (command) { 1301 case D40_DMA_STOP: 1302 case D40_DMA_SUSPEND_REQ: 1303 1304 active_status = (readl(active_reg) & 1305 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 1306 D40_CHAN_POS(d40c->phy_chan->num); 1307 1308 if (active_status == D40_DMA_RUN) 1309 d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE); 1310 else 1311 d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE); 1312 1313 if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP)) 1314 ret = __d40_execute_command_phy(d40c, command); 1315 1316 break; 1317 1318 case D40_DMA_RUN: 1319 1320 d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE); 1321 ret = __d40_execute_command_phy(d40c, command); 1322 break; 1323 1324 case D40_DMA_SUSPENDED: 1325 BUG(); 1326 break; 1327 } 1328 1329 spin_unlock_irqrestore(&d40c->phy_chan->lock, flags); 1330 return ret; 1331 } 1332 1333 static int d40_channel_execute_command(struct d40_chan *d40c, 1334 enum d40_command command) 1335 { 1336 if (chan_is_logical(d40c)) 1337 return __d40_execute_command_log(d40c, command); 1338 else 1339 return __d40_execute_command_phy(d40c, command); 1340 } 1341 1342 static u32 d40_get_prmo(struct d40_chan *d40c) 1343 { 1344 static const unsigned int phy_map[] = { 1345 [STEDMA40_PCHAN_BASIC_MODE] 1346 = D40_DREG_PRMO_PCHAN_BASIC, 1347 [STEDMA40_PCHAN_MODULO_MODE] 1348 = D40_DREG_PRMO_PCHAN_MODULO, 1349 [STEDMA40_PCHAN_DOUBLE_DST_MODE] 1350 = D40_DREG_PRMO_PCHAN_DOUBLE_DST, 1351 }; 1352 static const unsigned int log_map[] = { 1353 [STEDMA40_LCHAN_SRC_PHY_DST_LOG] 1354 = D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG, 1355 [STEDMA40_LCHAN_SRC_LOG_DST_PHY] 1356 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY, 1357 [STEDMA40_LCHAN_SRC_LOG_DST_LOG] 1358 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG, 1359 }; 1360 1361 if (chan_is_physical(d40c)) 1362 return phy_map[d40c->dma_cfg.mode_opt]; 1363 else 1364 return log_map[d40c->dma_cfg.mode_opt]; 1365 } 1366 1367 static void d40_config_write(struct d40_chan *d40c) 1368 { 1369 u32 addr_base; 1370 u32 var; 1371 1372 /* Odd addresses are even addresses + 4 */ 1373 addr_base = (d40c->phy_chan->num % 2) * 4; 1374 /* Setup channel mode to logical or physical */ 1375 var = ((u32)(chan_is_logical(d40c)) + 1) << 1376 D40_CHAN_POS(d40c->phy_chan->num); 1377 writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base); 1378 1379 /* Setup operational mode option register */ 1380 var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num); 1381 1382 writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base); 1383 1384 if (chan_is_logical(d40c)) { 1385 int lidx = (d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS) 1386 & D40_SREG_ELEM_LOG_LIDX_MASK; 1387 void __iomem *chanbase = chan_base(d40c); 1388 1389 /* Set default config for CFG reg */ 1390 writel(d40c->src_def_cfg, chanbase + D40_CHAN_REG_SSCFG); 1391 writel(d40c->dst_def_cfg, chanbase + D40_CHAN_REG_SDCFG); 1392 1393 /* Set LIDX for lcla */ 1394 writel(lidx, chanbase + D40_CHAN_REG_SSELT); 1395 writel(lidx, chanbase + D40_CHAN_REG_SDELT); 1396 1397 /* Clear LNK which will be used by d40_chan_has_events() */ 1398 writel(0, chanbase + D40_CHAN_REG_SSLNK); 1399 writel(0, chanbase + D40_CHAN_REG_SDLNK); 1400 } 1401 } 1402 1403 static u32 d40_residue(struct d40_chan *d40c) 1404 { 1405 u32 num_elt; 1406 1407 if (chan_is_logical(d40c)) 1408 num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK) 1409 >> D40_MEM_LCSP2_ECNT_POS; 1410 else { 1411 u32 val = readl(chan_base(d40c) + D40_CHAN_REG_SDELT); 1412 num_elt = (val & D40_SREG_ELEM_PHY_ECNT_MASK) 1413 >> D40_SREG_ELEM_PHY_ECNT_POS; 1414 } 1415 1416 return num_elt * d40c->dma_cfg.dst_info.data_width; 1417 } 1418 1419 static bool d40_tx_is_linked(struct d40_chan *d40c) 1420 { 1421 bool is_link; 1422 1423 if (chan_is_logical(d40c)) 1424 is_link = readl(&d40c->lcpa->lcsp3) & D40_MEM_LCSP3_DLOS_MASK; 1425 else 1426 is_link = readl(chan_base(d40c) + D40_CHAN_REG_SDLNK) 1427 & D40_SREG_LNK_PHYS_LNK_MASK; 1428 1429 return is_link; 1430 } 1431 1432 static int d40_pause(struct d40_chan *d40c) 1433 { 1434 int res = 0; 1435 unsigned long flags; 1436 1437 if (!d40c->busy) 1438 return 0; 1439 1440 spin_lock_irqsave(&d40c->lock, flags); 1441 pm_runtime_get_sync(d40c->base->dev); 1442 1443 res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); 1444 1445 pm_runtime_mark_last_busy(d40c->base->dev); 1446 pm_runtime_put_autosuspend(d40c->base->dev); 1447 spin_unlock_irqrestore(&d40c->lock, flags); 1448 return res; 1449 } 1450 1451 static int d40_resume(struct d40_chan *d40c) 1452 { 1453 int res = 0; 1454 unsigned long flags; 1455 1456 if (!d40c->busy) 1457 return 0; 1458 1459 spin_lock_irqsave(&d40c->lock, flags); 1460 pm_runtime_get_sync(d40c->base->dev); 1461 1462 /* If bytes left to transfer or linked tx resume job */ 1463 if (d40_residue(d40c) || d40_tx_is_linked(d40c)) 1464 res = d40_channel_execute_command(d40c, D40_DMA_RUN); 1465 1466 pm_runtime_mark_last_busy(d40c->base->dev); 1467 pm_runtime_put_autosuspend(d40c->base->dev); 1468 spin_unlock_irqrestore(&d40c->lock, flags); 1469 return res; 1470 } 1471 1472 static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) 1473 { 1474 struct d40_chan *d40c = container_of(tx->chan, 1475 struct d40_chan, 1476 chan); 1477 struct d40_desc *d40d = container_of(tx, struct d40_desc, txd); 1478 unsigned long flags; 1479 dma_cookie_t cookie; 1480 1481 spin_lock_irqsave(&d40c->lock, flags); 1482 cookie = dma_cookie_assign(tx); 1483 d40_desc_queue(d40c, d40d); 1484 spin_unlock_irqrestore(&d40c->lock, flags); 1485 1486 return cookie; 1487 } 1488 1489 static int d40_start(struct d40_chan *d40c) 1490 { 1491 return d40_channel_execute_command(d40c, D40_DMA_RUN); 1492 } 1493 1494 static struct d40_desc *d40_queue_start(struct d40_chan *d40c) 1495 { 1496 struct d40_desc *d40d; 1497 int err; 1498 1499 /* Start queued jobs, if any */ 1500 d40d = d40_first_queued(d40c); 1501 1502 if (d40d != NULL) { 1503 if (!d40c->busy) { 1504 d40c->busy = true; 1505 pm_runtime_get_sync(d40c->base->dev); 1506 } 1507 1508 /* Remove from queue */ 1509 d40_desc_remove(d40d); 1510 1511 /* Add to active queue */ 1512 d40_desc_submit(d40c, d40d); 1513 1514 /* Initiate DMA job */ 1515 d40_desc_load(d40c, d40d); 1516 1517 /* Start dma job */ 1518 err = d40_start(d40c); 1519 1520 if (err) 1521 return NULL; 1522 } 1523 1524 return d40d; 1525 } 1526 1527 /* called from interrupt context */ 1528 static void dma_tc_handle(struct d40_chan *d40c) 1529 { 1530 struct d40_desc *d40d; 1531 1532 /* Get first active entry from list */ 1533 d40d = d40_first_active_get(d40c); 1534 1535 if (d40d == NULL) 1536 return; 1537 1538 if (d40d->cyclic) { 1539 /* 1540 * If this was a paritially loaded list, we need to reloaded 1541 * it, and only when the list is completed. We need to check 1542 * for done because the interrupt will hit for every link, and 1543 * not just the last one. 1544 */ 1545 if (d40d->lli_current < d40d->lli_len 1546 && !d40_tx_is_linked(d40c) 1547 && !d40_residue(d40c)) { 1548 d40_lcla_free_all(d40c, d40d); 1549 d40_desc_load(d40c, d40d); 1550 (void) d40_start(d40c); 1551 1552 if (d40d->lli_current == d40d->lli_len) 1553 d40d->lli_current = 0; 1554 } 1555 } else { 1556 d40_lcla_free_all(d40c, d40d); 1557 1558 if (d40d->lli_current < d40d->lli_len) { 1559 d40_desc_load(d40c, d40d); 1560 /* Start dma job */ 1561 (void) d40_start(d40c); 1562 return; 1563 } 1564 1565 if (d40_queue_start(d40c) == NULL) { 1566 d40c->busy = false; 1567 1568 pm_runtime_mark_last_busy(d40c->base->dev); 1569 pm_runtime_put_autosuspend(d40c->base->dev); 1570 } 1571 1572 d40_desc_remove(d40d); 1573 d40_desc_done(d40c, d40d); 1574 } 1575 1576 d40c->pending_tx++; 1577 tasklet_schedule(&d40c->tasklet); 1578 1579 } 1580 1581 static void dma_tasklet(unsigned long data) 1582 { 1583 struct d40_chan *d40c = (struct d40_chan *) data; 1584 struct d40_desc *d40d; 1585 unsigned long flags; 1586 bool callback_active; 1587 dma_async_tx_callback callback; 1588 void *callback_param; 1589 1590 spin_lock_irqsave(&d40c->lock, flags); 1591 1592 /* Get first entry from the done list */ 1593 d40d = d40_first_done(d40c); 1594 if (d40d == NULL) { 1595 /* Check if we have reached here for cyclic job */ 1596 d40d = d40_first_active_get(d40c); 1597 if (d40d == NULL || !d40d->cyclic) 1598 goto err; 1599 } 1600 1601 if (!d40d->cyclic) 1602 dma_cookie_complete(&d40d->txd); 1603 1604 /* 1605 * If terminating a channel pending_tx is set to zero. 1606 * This prevents any finished active jobs to return to the client. 1607 */ 1608 if (d40c->pending_tx == 0) { 1609 spin_unlock_irqrestore(&d40c->lock, flags); 1610 return; 1611 } 1612 1613 /* Callback to client */ 1614 callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT); 1615 callback = d40d->txd.callback; 1616 callback_param = d40d->txd.callback_param; 1617 1618 if (!d40d->cyclic) { 1619 if (async_tx_test_ack(&d40d->txd)) { 1620 d40_desc_remove(d40d); 1621 d40_desc_free(d40c, d40d); 1622 } else if (!d40d->is_in_client_list) { 1623 d40_desc_remove(d40d); 1624 d40_lcla_free_all(d40c, d40d); 1625 list_add_tail(&d40d->node, &d40c->client); 1626 d40d->is_in_client_list = true; 1627 } 1628 } 1629 1630 d40c->pending_tx--; 1631 1632 if (d40c->pending_tx) 1633 tasklet_schedule(&d40c->tasklet); 1634 1635 spin_unlock_irqrestore(&d40c->lock, flags); 1636 1637 if (callback_active && callback) 1638 callback(callback_param); 1639 1640 return; 1641 1642 err: 1643 /* Rescue manouver if receiving double interrupts */ 1644 if (d40c->pending_tx > 0) 1645 d40c->pending_tx--; 1646 spin_unlock_irqrestore(&d40c->lock, flags); 1647 } 1648 1649 static irqreturn_t d40_handle_interrupt(int irq, void *data) 1650 { 1651 int i; 1652 u32 idx; 1653 u32 row; 1654 long chan = -1; 1655 struct d40_chan *d40c; 1656 unsigned long flags; 1657 struct d40_base *base = data; 1658 u32 regs[base->gen_dmac.il_size]; 1659 struct d40_interrupt_lookup *il = base->gen_dmac.il; 1660 u32 il_size = base->gen_dmac.il_size; 1661 1662 spin_lock_irqsave(&base->interrupt_lock, flags); 1663 1664 /* Read interrupt status of both logical and physical channels */ 1665 for (i = 0; i < il_size; i++) 1666 regs[i] = readl(base->virtbase + il[i].src); 1667 1668 for (;;) { 1669 1670 chan = find_next_bit((unsigned long *)regs, 1671 BITS_PER_LONG * il_size, chan + 1); 1672 1673 /* No more set bits found? */ 1674 if (chan == BITS_PER_LONG * il_size) 1675 break; 1676 1677 row = chan / BITS_PER_LONG; 1678 idx = chan & (BITS_PER_LONG - 1); 1679 1680 if (il[row].offset == D40_PHY_CHAN) 1681 d40c = base->lookup_phy_chans[idx]; 1682 else 1683 d40c = base->lookup_log_chans[il[row].offset + idx]; 1684 1685 if (!d40c) { 1686 /* 1687 * No error because this can happen if something else 1688 * in the system is using the channel. 1689 */ 1690 continue; 1691 } 1692 1693 /* ACK interrupt */ 1694 writel(BIT(idx), base->virtbase + il[row].clr); 1695 1696 spin_lock(&d40c->lock); 1697 1698 if (!il[row].is_error) 1699 dma_tc_handle(d40c); 1700 else 1701 d40_err(base->dev, "IRQ chan: %ld offset %d idx %d\n", 1702 chan, il[row].offset, idx); 1703 1704 spin_unlock(&d40c->lock); 1705 } 1706 1707 spin_unlock_irqrestore(&base->interrupt_lock, flags); 1708 1709 return IRQ_HANDLED; 1710 } 1711 1712 static int d40_validate_conf(struct d40_chan *d40c, 1713 struct stedma40_chan_cfg *conf) 1714 { 1715 int res = 0; 1716 bool is_log = conf->mode == STEDMA40_MODE_LOGICAL; 1717 1718 if (!conf->dir) { 1719 chan_err(d40c, "Invalid direction.\n"); 1720 res = -EINVAL; 1721 } 1722 1723 if ((is_log && conf->dev_type > d40c->base->num_log_chans) || 1724 (!is_log && conf->dev_type > d40c->base->num_phy_chans) || 1725 (conf->dev_type < 0)) { 1726 chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type); 1727 res = -EINVAL; 1728 } 1729 1730 if (conf->dir == DMA_DEV_TO_DEV) { 1731 /* 1732 * DMAC HW supports it. Will be added to this driver, 1733 * in case any dma client requires it. 1734 */ 1735 chan_err(d40c, "periph to periph not supported\n"); 1736 res = -EINVAL; 1737 } 1738 1739 if (d40_psize_2_burst_size(is_log, conf->src_info.psize) * 1740 conf->src_info.data_width != 1741 d40_psize_2_burst_size(is_log, conf->dst_info.psize) * 1742 conf->dst_info.data_width) { 1743 /* 1744 * The DMAC hardware only supports 1745 * src (burst x width) == dst (burst x width) 1746 */ 1747 1748 chan_err(d40c, "src (burst x width) != dst (burst x width)\n"); 1749 res = -EINVAL; 1750 } 1751 1752 return res; 1753 } 1754 1755 static bool d40_alloc_mask_set(struct d40_phy_res *phy, 1756 bool is_src, int log_event_line, bool is_log, 1757 bool *first_user) 1758 { 1759 unsigned long flags; 1760 spin_lock_irqsave(&phy->lock, flags); 1761 1762 *first_user = ((phy->allocated_src | phy->allocated_dst) 1763 == D40_ALLOC_FREE); 1764 1765 if (!is_log) { 1766 /* Physical interrupts are masked per physical full channel */ 1767 if (phy->allocated_src == D40_ALLOC_FREE && 1768 phy->allocated_dst == D40_ALLOC_FREE) { 1769 phy->allocated_dst = D40_ALLOC_PHY; 1770 phy->allocated_src = D40_ALLOC_PHY; 1771 goto found; 1772 } else 1773 goto not_found; 1774 } 1775 1776 /* Logical channel */ 1777 if (is_src) { 1778 if (phy->allocated_src == D40_ALLOC_PHY) 1779 goto not_found; 1780 1781 if (phy->allocated_src == D40_ALLOC_FREE) 1782 phy->allocated_src = D40_ALLOC_LOG_FREE; 1783 1784 if (!(phy->allocated_src & BIT(log_event_line))) { 1785 phy->allocated_src |= BIT(log_event_line); 1786 goto found; 1787 } else 1788 goto not_found; 1789 } else { 1790 if (phy->allocated_dst == D40_ALLOC_PHY) 1791 goto not_found; 1792 1793 if (phy->allocated_dst == D40_ALLOC_FREE) 1794 phy->allocated_dst = D40_ALLOC_LOG_FREE; 1795 1796 if (!(phy->allocated_dst & BIT(log_event_line))) { 1797 phy->allocated_dst |= BIT(log_event_line); 1798 goto found; 1799 } else 1800 goto not_found; 1801 } 1802 1803 not_found: 1804 spin_unlock_irqrestore(&phy->lock, flags); 1805 return false; 1806 found: 1807 spin_unlock_irqrestore(&phy->lock, flags); 1808 return true; 1809 } 1810 1811 static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src, 1812 int log_event_line) 1813 { 1814 unsigned long flags; 1815 bool is_free = false; 1816 1817 spin_lock_irqsave(&phy->lock, flags); 1818 if (!log_event_line) { 1819 phy->allocated_dst = D40_ALLOC_FREE; 1820 phy->allocated_src = D40_ALLOC_FREE; 1821 is_free = true; 1822 goto out; 1823 } 1824 1825 /* Logical channel */ 1826 if (is_src) { 1827 phy->allocated_src &= ~BIT(log_event_line); 1828 if (phy->allocated_src == D40_ALLOC_LOG_FREE) 1829 phy->allocated_src = D40_ALLOC_FREE; 1830 } else { 1831 phy->allocated_dst &= ~BIT(log_event_line); 1832 if (phy->allocated_dst == D40_ALLOC_LOG_FREE) 1833 phy->allocated_dst = D40_ALLOC_FREE; 1834 } 1835 1836 is_free = ((phy->allocated_src | phy->allocated_dst) == 1837 D40_ALLOC_FREE); 1838 1839 out: 1840 spin_unlock_irqrestore(&phy->lock, flags); 1841 1842 return is_free; 1843 } 1844 1845 static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user) 1846 { 1847 int dev_type = d40c->dma_cfg.dev_type; 1848 int event_group; 1849 int event_line; 1850 struct d40_phy_res *phys; 1851 int i; 1852 int j; 1853 int log_num; 1854 int num_phy_chans; 1855 bool is_src; 1856 bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL; 1857 1858 phys = d40c->base->phy_res; 1859 num_phy_chans = d40c->base->num_phy_chans; 1860 1861 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { 1862 log_num = 2 * dev_type; 1863 is_src = true; 1864 } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || 1865 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { 1866 /* dst event lines are used for logical memcpy */ 1867 log_num = 2 * dev_type + 1; 1868 is_src = false; 1869 } else 1870 return -EINVAL; 1871 1872 event_group = D40_TYPE_TO_GROUP(dev_type); 1873 event_line = D40_TYPE_TO_EVENT(dev_type); 1874 1875 if (!is_log) { 1876 if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { 1877 /* Find physical half channel */ 1878 if (d40c->dma_cfg.use_fixed_channel) { 1879 i = d40c->dma_cfg.phy_channel; 1880 if (d40_alloc_mask_set(&phys[i], is_src, 1881 0, is_log, 1882 first_phy_user)) 1883 goto found_phy; 1884 } else { 1885 for (i = 0; i < num_phy_chans; i++) { 1886 if (d40_alloc_mask_set(&phys[i], is_src, 1887 0, is_log, 1888 first_phy_user)) 1889 goto found_phy; 1890 } 1891 } 1892 } else 1893 for (j = 0; j < d40c->base->num_phy_chans; j += 8) { 1894 int phy_num = j + event_group * 2; 1895 for (i = phy_num; i < phy_num + 2; i++) { 1896 if (d40_alloc_mask_set(&phys[i], 1897 is_src, 1898 0, 1899 is_log, 1900 first_phy_user)) 1901 goto found_phy; 1902 } 1903 } 1904 return -EINVAL; 1905 found_phy: 1906 d40c->phy_chan = &phys[i]; 1907 d40c->log_num = D40_PHY_CHAN; 1908 goto out; 1909 } 1910 if (dev_type == -1) 1911 return -EINVAL; 1912 1913 /* Find logical channel */ 1914 for (j = 0; j < d40c->base->num_phy_chans; j += 8) { 1915 int phy_num = j + event_group * 2; 1916 1917 if (d40c->dma_cfg.use_fixed_channel) { 1918 i = d40c->dma_cfg.phy_channel; 1919 1920 if ((i != phy_num) && (i != phy_num + 1)) { 1921 dev_err(chan2dev(d40c), 1922 "invalid fixed phy channel %d\n", i); 1923 return -EINVAL; 1924 } 1925 1926 if (d40_alloc_mask_set(&phys[i], is_src, event_line, 1927 is_log, first_phy_user)) 1928 goto found_log; 1929 1930 dev_err(chan2dev(d40c), 1931 "could not allocate fixed phy channel %d\n", i); 1932 return -EINVAL; 1933 } 1934 1935 /* 1936 * Spread logical channels across all available physical rather 1937 * than pack every logical channel at the first available phy 1938 * channels. 1939 */ 1940 if (is_src) { 1941 for (i = phy_num; i < phy_num + 2; i++) { 1942 if (d40_alloc_mask_set(&phys[i], is_src, 1943 event_line, is_log, 1944 first_phy_user)) 1945 goto found_log; 1946 } 1947 } else { 1948 for (i = phy_num + 1; i >= phy_num; i--) { 1949 if (d40_alloc_mask_set(&phys[i], is_src, 1950 event_line, is_log, 1951 first_phy_user)) 1952 goto found_log; 1953 } 1954 } 1955 } 1956 return -EINVAL; 1957 1958 found_log: 1959 d40c->phy_chan = &phys[i]; 1960 d40c->log_num = log_num; 1961 out: 1962 1963 if (is_log) 1964 d40c->base->lookup_log_chans[d40c->log_num] = d40c; 1965 else 1966 d40c->base->lookup_phy_chans[d40c->phy_chan->num] = d40c; 1967 1968 return 0; 1969 1970 } 1971 1972 static int d40_config_memcpy(struct d40_chan *d40c) 1973 { 1974 dma_cap_mask_t cap = d40c->chan.device->cap_mask; 1975 1976 if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) { 1977 d40c->dma_cfg = dma40_memcpy_conf_log; 1978 d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id]; 1979 1980 d40_log_cfg(&d40c->dma_cfg, 1981 &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); 1982 1983 } else if (dma_has_cap(DMA_MEMCPY, cap) && 1984 dma_has_cap(DMA_SLAVE, cap)) { 1985 d40c->dma_cfg = dma40_memcpy_conf_phy; 1986 1987 /* Generate interrrupt at end of transfer or relink. */ 1988 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS); 1989 1990 /* Generate interrupt on error. */ 1991 d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); 1992 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); 1993 1994 } else { 1995 chan_err(d40c, "No memcpy\n"); 1996 return -EINVAL; 1997 } 1998 1999 return 0; 2000 } 2001 2002 static int d40_free_dma(struct d40_chan *d40c) 2003 { 2004 2005 int res = 0; 2006 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); 2007 struct d40_phy_res *phy = d40c->phy_chan; 2008 bool is_src; 2009 2010 /* Terminate all queued and active transfers */ 2011 d40_term_all(d40c); 2012 2013 if (phy == NULL) { 2014 chan_err(d40c, "phy == null\n"); 2015 return -EINVAL; 2016 } 2017 2018 if (phy->allocated_src == D40_ALLOC_FREE && 2019 phy->allocated_dst == D40_ALLOC_FREE) { 2020 chan_err(d40c, "channel already free\n"); 2021 return -EINVAL; 2022 } 2023 2024 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || 2025 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) 2026 is_src = false; 2027 else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) 2028 is_src = true; 2029 else { 2030 chan_err(d40c, "Unknown direction\n"); 2031 return -EINVAL; 2032 } 2033 2034 pm_runtime_get_sync(d40c->base->dev); 2035 res = d40_channel_execute_command(d40c, D40_DMA_STOP); 2036 if (res) { 2037 chan_err(d40c, "stop failed\n"); 2038 goto out; 2039 } 2040 2041 d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0); 2042 2043 if (chan_is_logical(d40c)) 2044 d40c->base->lookup_log_chans[d40c->log_num] = NULL; 2045 else 2046 d40c->base->lookup_phy_chans[phy->num] = NULL; 2047 2048 if (d40c->busy) { 2049 pm_runtime_mark_last_busy(d40c->base->dev); 2050 pm_runtime_put_autosuspend(d40c->base->dev); 2051 } 2052 2053 d40c->busy = false; 2054 d40c->phy_chan = NULL; 2055 d40c->configured = false; 2056 out: 2057 2058 pm_runtime_mark_last_busy(d40c->base->dev); 2059 pm_runtime_put_autosuspend(d40c->base->dev); 2060 return res; 2061 } 2062 2063 static bool d40_is_paused(struct d40_chan *d40c) 2064 { 2065 void __iomem *chanbase = chan_base(d40c); 2066 bool is_paused = false; 2067 unsigned long flags; 2068 void __iomem *active_reg; 2069 u32 status; 2070 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); 2071 2072 spin_lock_irqsave(&d40c->lock, flags); 2073 2074 if (chan_is_physical(d40c)) { 2075 if (d40c->phy_chan->num % 2 == 0) 2076 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; 2077 else 2078 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; 2079 2080 status = (readl(active_reg) & 2081 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 2082 D40_CHAN_POS(d40c->phy_chan->num); 2083 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP) 2084 is_paused = true; 2085 2086 goto _exit; 2087 } 2088 2089 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || 2090 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { 2091 status = readl(chanbase + D40_CHAN_REG_SDLNK); 2092 } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { 2093 status = readl(chanbase + D40_CHAN_REG_SSLNK); 2094 } else { 2095 chan_err(d40c, "Unknown direction\n"); 2096 goto _exit; 2097 } 2098 2099 status = (status & D40_EVENTLINE_MASK(event)) >> 2100 D40_EVENTLINE_POS(event); 2101 2102 if (status != D40_DMA_RUN) 2103 is_paused = true; 2104 _exit: 2105 spin_unlock_irqrestore(&d40c->lock, flags); 2106 return is_paused; 2107 2108 } 2109 2110 static u32 stedma40_residue(struct dma_chan *chan) 2111 { 2112 struct d40_chan *d40c = 2113 container_of(chan, struct d40_chan, chan); 2114 u32 bytes_left; 2115 unsigned long flags; 2116 2117 spin_lock_irqsave(&d40c->lock, flags); 2118 bytes_left = d40_residue(d40c); 2119 spin_unlock_irqrestore(&d40c->lock, flags); 2120 2121 return bytes_left; 2122 } 2123 2124 static int 2125 d40_prep_sg_log(struct d40_chan *chan, struct d40_desc *desc, 2126 struct scatterlist *sg_src, struct scatterlist *sg_dst, 2127 unsigned int sg_len, dma_addr_t src_dev_addr, 2128 dma_addr_t dst_dev_addr) 2129 { 2130 struct stedma40_chan_cfg *cfg = &chan->dma_cfg; 2131 struct stedma40_half_channel_info *src_info = &cfg->src_info; 2132 struct stedma40_half_channel_info *dst_info = &cfg->dst_info; 2133 int ret; 2134 2135 ret = d40_log_sg_to_lli(sg_src, sg_len, 2136 src_dev_addr, 2137 desc->lli_log.src, 2138 chan->log_def.lcsp1, 2139 src_info->data_width, 2140 dst_info->data_width); 2141 2142 ret = d40_log_sg_to_lli(sg_dst, sg_len, 2143 dst_dev_addr, 2144 desc->lli_log.dst, 2145 chan->log_def.lcsp3, 2146 dst_info->data_width, 2147 src_info->data_width); 2148 2149 return ret < 0 ? ret : 0; 2150 } 2151 2152 static int 2153 d40_prep_sg_phy(struct d40_chan *chan, struct d40_desc *desc, 2154 struct scatterlist *sg_src, struct scatterlist *sg_dst, 2155 unsigned int sg_len, dma_addr_t src_dev_addr, 2156 dma_addr_t dst_dev_addr) 2157 { 2158 struct stedma40_chan_cfg *cfg = &chan->dma_cfg; 2159 struct stedma40_half_channel_info *src_info = &cfg->src_info; 2160 struct stedma40_half_channel_info *dst_info = &cfg->dst_info; 2161 unsigned long flags = 0; 2162 int ret; 2163 2164 if (desc->cyclic) 2165 flags |= LLI_CYCLIC | LLI_TERM_INT; 2166 2167 ret = d40_phy_sg_to_lli(sg_src, sg_len, src_dev_addr, 2168 desc->lli_phy.src, 2169 virt_to_phys(desc->lli_phy.src), 2170 chan->src_def_cfg, 2171 src_info, dst_info, flags); 2172 2173 ret = d40_phy_sg_to_lli(sg_dst, sg_len, dst_dev_addr, 2174 desc->lli_phy.dst, 2175 virt_to_phys(desc->lli_phy.dst), 2176 chan->dst_def_cfg, 2177 dst_info, src_info, flags); 2178 2179 dma_sync_single_for_device(chan->base->dev, desc->lli_pool.dma_addr, 2180 desc->lli_pool.size, DMA_TO_DEVICE); 2181 2182 return ret < 0 ? ret : 0; 2183 } 2184 2185 static struct d40_desc * 2186 d40_prep_desc(struct d40_chan *chan, struct scatterlist *sg, 2187 unsigned int sg_len, unsigned long dma_flags) 2188 { 2189 struct stedma40_chan_cfg *cfg = &chan->dma_cfg; 2190 struct d40_desc *desc; 2191 int ret; 2192 2193 desc = d40_desc_get(chan); 2194 if (!desc) 2195 return NULL; 2196 2197 desc->lli_len = d40_sg_2_dmalen(sg, sg_len, cfg->src_info.data_width, 2198 cfg->dst_info.data_width); 2199 if (desc->lli_len < 0) { 2200 chan_err(chan, "Unaligned size\n"); 2201 goto err; 2202 } 2203 2204 ret = d40_pool_lli_alloc(chan, desc, desc->lli_len); 2205 if (ret < 0) { 2206 chan_err(chan, "Could not allocate lli\n"); 2207 goto err; 2208 } 2209 2210 desc->lli_current = 0; 2211 desc->txd.flags = dma_flags; 2212 desc->txd.tx_submit = d40_tx_submit; 2213 2214 dma_async_tx_descriptor_init(&desc->txd, &chan->chan); 2215 2216 return desc; 2217 2218 err: 2219 d40_desc_free(chan, desc); 2220 return NULL; 2221 } 2222 2223 static struct dma_async_tx_descriptor * 2224 d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, 2225 struct scatterlist *sg_dst, unsigned int sg_len, 2226 enum dma_transfer_direction direction, unsigned long dma_flags) 2227 { 2228 struct d40_chan *chan = container_of(dchan, struct d40_chan, chan); 2229 dma_addr_t src_dev_addr = 0; 2230 dma_addr_t dst_dev_addr = 0; 2231 struct d40_desc *desc; 2232 unsigned long flags; 2233 int ret; 2234 2235 if (!chan->phy_chan) { 2236 chan_err(chan, "Cannot prepare unallocated channel\n"); 2237 return NULL; 2238 } 2239 2240 spin_lock_irqsave(&chan->lock, flags); 2241 2242 desc = d40_prep_desc(chan, sg_src, sg_len, dma_flags); 2243 if (desc == NULL) 2244 goto err; 2245 2246 if (sg_next(&sg_src[sg_len - 1]) == sg_src) 2247 desc->cyclic = true; 2248 2249 if (direction == DMA_DEV_TO_MEM) 2250 src_dev_addr = chan->runtime_addr; 2251 else if (direction == DMA_MEM_TO_DEV) 2252 dst_dev_addr = chan->runtime_addr; 2253 2254 if (chan_is_logical(chan)) 2255 ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst, 2256 sg_len, src_dev_addr, dst_dev_addr); 2257 else 2258 ret = d40_prep_sg_phy(chan, desc, sg_src, sg_dst, 2259 sg_len, src_dev_addr, dst_dev_addr); 2260 2261 if (ret) { 2262 chan_err(chan, "Failed to prepare %s sg job: %d\n", 2263 chan_is_logical(chan) ? "log" : "phy", ret); 2264 goto err; 2265 } 2266 2267 /* 2268 * add descriptor to the prepare queue in order to be able 2269 * to free them later in terminate_all 2270 */ 2271 list_add_tail(&desc->node, &chan->prepare_queue); 2272 2273 spin_unlock_irqrestore(&chan->lock, flags); 2274 2275 return &desc->txd; 2276 2277 err: 2278 if (desc) 2279 d40_desc_free(chan, desc); 2280 spin_unlock_irqrestore(&chan->lock, flags); 2281 return NULL; 2282 } 2283 2284 bool stedma40_filter(struct dma_chan *chan, void *data) 2285 { 2286 struct stedma40_chan_cfg *info = data; 2287 struct d40_chan *d40c = 2288 container_of(chan, struct d40_chan, chan); 2289 int err; 2290 2291 if (data) { 2292 err = d40_validate_conf(d40c, info); 2293 if (!err) 2294 d40c->dma_cfg = *info; 2295 } else 2296 err = d40_config_memcpy(d40c); 2297 2298 if (!err) 2299 d40c->configured = true; 2300 2301 return err == 0; 2302 } 2303 EXPORT_SYMBOL(stedma40_filter); 2304 2305 static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src) 2306 { 2307 bool realtime = d40c->dma_cfg.realtime; 2308 bool highprio = d40c->dma_cfg.high_priority; 2309 u32 rtreg; 2310 u32 event = D40_TYPE_TO_EVENT(dev_type); 2311 u32 group = D40_TYPE_TO_GROUP(dev_type); 2312 u32 bit = BIT(event); 2313 u32 prioreg; 2314 struct d40_gen_dmac *dmac = &d40c->base->gen_dmac; 2315 2316 rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear; 2317 /* 2318 * Due to a hardware bug, in some cases a logical channel triggered by 2319 * a high priority destination event line can generate extra packet 2320 * transactions. 2321 * 2322 * The workaround is to not set the high priority level for the 2323 * destination event lines that trigger logical channels. 2324 */ 2325 if (!src && chan_is_logical(d40c)) 2326 highprio = false; 2327 2328 prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear; 2329 2330 /* Destination event lines are stored in the upper halfword */ 2331 if (!src) 2332 bit <<= 16; 2333 2334 writel(bit, d40c->base->virtbase + prioreg + group * 4); 2335 writel(bit, d40c->base->virtbase + rtreg + group * 4); 2336 } 2337 2338 static void d40_set_prio_realtime(struct d40_chan *d40c) 2339 { 2340 if (d40c->base->rev < 3) 2341 return; 2342 2343 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || 2344 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) 2345 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true); 2346 2347 if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) || 2348 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) 2349 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false); 2350 } 2351 2352 #define D40_DT_FLAGS_MODE(flags) ((flags >> 0) & 0x1) 2353 #define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1) 2354 #define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1) 2355 #define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1) 2356 #define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1) 2357 2358 static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, 2359 struct of_dma *ofdma) 2360 { 2361 struct stedma40_chan_cfg cfg; 2362 dma_cap_mask_t cap; 2363 u32 flags; 2364 2365 memset(&cfg, 0, sizeof(struct stedma40_chan_cfg)); 2366 2367 dma_cap_zero(cap); 2368 dma_cap_set(DMA_SLAVE, cap); 2369 2370 cfg.dev_type = dma_spec->args[0]; 2371 flags = dma_spec->args[2]; 2372 2373 switch (D40_DT_FLAGS_MODE(flags)) { 2374 case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break; 2375 case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break; 2376 } 2377 2378 switch (D40_DT_FLAGS_DIR(flags)) { 2379 case 0: 2380 cfg.dir = DMA_MEM_TO_DEV; 2381 cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); 2382 break; 2383 case 1: 2384 cfg.dir = DMA_DEV_TO_MEM; 2385 cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); 2386 break; 2387 } 2388 2389 if (D40_DT_FLAGS_FIXED_CHAN(flags)) { 2390 cfg.phy_channel = dma_spec->args[1]; 2391 cfg.use_fixed_channel = true; 2392 } 2393 2394 if (D40_DT_FLAGS_HIGH_PRIO(flags)) 2395 cfg.high_priority = true; 2396 2397 return dma_request_channel(cap, stedma40_filter, &cfg); 2398 } 2399 2400 /* DMA ENGINE functions */ 2401 static int d40_alloc_chan_resources(struct dma_chan *chan) 2402 { 2403 int err; 2404 unsigned long flags; 2405 struct d40_chan *d40c = 2406 container_of(chan, struct d40_chan, chan); 2407 bool is_free_phy; 2408 spin_lock_irqsave(&d40c->lock, flags); 2409 2410 dma_cookie_init(chan); 2411 2412 /* If no dma configuration is set use default configuration (memcpy) */ 2413 if (!d40c->configured) { 2414 err = d40_config_memcpy(d40c); 2415 if (err) { 2416 chan_err(d40c, "Failed to configure memcpy channel\n"); 2417 goto fail; 2418 } 2419 } 2420 2421 err = d40_allocate_channel(d40c, &is_free_phy); 2422 if (err) { 2423 chan_err(d40c, "Failed to allocate channel\n"); 2424 d40c->configured = false; 2425 goto fail; 2426 } 2427 2428 pm_runtime_get_sync(d40c->base->dev); 2429 2430 d40_set_prio_realtime(d40c); 2431 2432 if (chan_is_logical(d40c)) { 2433 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) 2434 d40c->lcpa = d40c->base->lcpa_base + 2435 d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE; 2436 else 2437 d40c->lcpa = d40c->base->lcpa_base + 2438 d40c->dma_cfg.dev_type * 2439 D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA; 2440 2441 /* Unmask the Global Interrupt Mask. */ 2442 d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS); 2443 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS); 2444 } 2445 2446 dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n", 2447 chan_is_logical(d40c) ? "logical" : "physical", 2448 d40c->phy_chan->num, 2449 d40c->dma_cfg.use_fixed_channel ? ", fixed" : ""); 2450 2451 2452 /* 2453 * Only write channel configuration to the DMA if the physical 2454 * resource is free. In case of multiple logical channels 2455 * on the same physical resource, only the first write is necessary. 2456 */ 2457 if (is_free_phy) 2458 d40_config_write(d40c); 2459 fail: 2460 pm_runtime_mark_last_busy(d40c->base->dev); 2461 pm_runtime_put_autosuspend(d40c->base->dev); 2462 spin_unlock_irqrestore(&d40c->lock, flags); 2463 return err; 2464 } 2465 2466 static void d40_free_chan_resources(struct dma_chan *chan) 2467 { 2468 struct d40_chan *d40c = 2469 container_of(chan, struct d40_chan, chan); 2470 int err; 2471 unsigned long flags; 2472 2473 if (d40c->phy_chan == NULL) { 2474 chan_err(d40c, "Cannot free unallocated channel\n"); 2475 return; 2476 } 2477 2478 spin_lock_irqsave(&d40c->lock, flags); 2479 2480 err = d40_free_dma(d40c); 2481 2482 if (err) 2483 chan_err(d40c, "Failed to free channel\n"); 2484 spin_unlock_irqrestore(&d40c->lock, flags); 2485 } 2486 2487 static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, 2488 dma_addr_t dst, 2489 dma_addr_t src, 2490 size_t size, 2491 unsigned long dma_flags) 2492 { 2493 struct scatterlist dst_sg; 2494 struct scatterlist src_sg; 2495 2496 sg_init_table(&dst_sg, 1); 2497 sg_init_table(&src_sg, 1); 2498 2499 sg_dma_address(&dst_sg) = dst; 2500 sg_dma_address(&src_sg) = src; 2501 2502 sg_dma_len(&dst_sg) = size; 2503 sg_dma_len(&src_sg) = size; 2504 2505 return d40_prep_sg(chan, &src_sg, &dst_sg, 1, DMA_NONE, dma_flags); 2506 } 2507 2508 static struct dma_async_tx_descriptor * 2509 d40_prep_memcpy_sg(struct dma_chan *chan, 2510 struct scatterlist *dst_sg, unsigned int dst_nents, 2511 struct scatterlist *src_sg, unsigned int src_nents, 2512 unsigned long dma_flags) 2513 { 2514 if (dst_nents != src_nents) 2515 return NULL; 2516 2517 return d40_prep_sg(chan, src_sg, dst_sg, src_nents, DMA_NONE, dma_flags); 2518 } 2519 2520 static struct dma_async_tx_descriptor * 2521 d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, 2522 unsigned int sg_len, enum dma_transfer_direction direction, 2523 unsigned long dma_flags, void *context) 2524 { 2525 if (!is_slave_direction(direction)) 2526 return NULL; 2527 2528 return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags); 2529 } 2530 2531 static struct dma_async_tx_descriptor * 2532 dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, 2533 size_t buf_len, size_t period_len, 2534 enum dma_transfer_direction direction, unsigned long flags) 2535 { 2536 unsigned int periods = buf_len / period_len; 2537 struct dma_async_tx_descriptor *txd; 2538 struct scatterlist *sg; 2539 int i; 2540 2541 sg = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_NOWAIT); 2542 if (!sg) 2543 return NULL; 2544 2545 for (i = 0; i < periods; i++) { 2546 sg_dma_address(&sg[i]) = dma_addr; 2547 sg_dma_len(&sg[i]) = period_len; 2548 dma_addr += period_len; 2549 } 2550 2551 sg[periods].offset = 0; 2552 sg_dma_len(&sg[periods]) = 0; 2553 sg[periods].page_link = 2554 ((unsigned long)sg | 0x01) & ~0x02; 2555 2556 txd = d40_prep_sg(chan, sg, sg, periods, direction, 2557 DMA_PREP_INTERRUPT); 2558 2559 kfree(sg); 2560 2561 return txd; 2562 } 2563 2564 static enum dma_status d40_tx_status(struct dma_chan *chan, 2565 dma_cookie_t cookie, 2566 struct dma_tx_state *txstate) 2567 { 2568 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2569 enum dma_status ret; 2570 2571 if (d40c->phy_chan == NULL) { 2572 chan_err(d40c, "Cannot read status of unallocated channel\n"); 2573 return -EINVAL; 2574 } 2575 2576 ret = dma_cookie_status(chan, cookie, txstate); 2577 if (ret != DMA_COMPLETE) 2578 dma_set_residue(txstate, stedma40_residue(chan)); 2579 2580 if (d40_is_paused(d40c)) 2581 ret = DMA_PAUSED; 2582 2583 return ret; 2584 } 2585 2586 static void d40_issue_pending(struct dma_chan *chan) 2587 { 2588 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2589 unsigned long flags; 2590 2591 if (d40c->phy_chan == NULL) { 2592 chan_err(d40c, "Channel is not allocated!\n"); 2593 return; 2594 } 2595 2596 spin_lock_irqsave(&d40c->lock, flags); 2597 2598 list_splice_tail_init(&d40c->pending_queue, &d40c->queue); 2599 2600 /* Busy means that queued jobs are already being processed */ 2601 if (!d40c->busy) 2602 (void) d40_queue_start(d40c); 2603 2604 spin_unlock_irqrestore(&d40c->lock, flags); 2605 } 2606 2607 static void d40_terminate_all(struct dma_chan *chan) 2608 { 2609 unsigned long flags; 2610 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2611 int ret; 2612 2613 spin_lock_irqsave(&d40c->lock, flags); 2614 2615 pm_runtime_get_sync(d40c->base->dev); 2616 ret = d40_channel_execute_command(d40c, D40_DMA_STOP); 2617 if (ret) 2618 chan_err(d40c, "Failed to stop channel\n"); 2619 2620 d40_term_all(d40c); 2621 pm_runtime_mark_last_busy(d40c->base->dev); 2622 pm_runtime_put_autosuspend(d40c->base->dev); 2623 if (d40c->busy) { 2624 pm_runtime_mark_last_busy(d40c->base->dev); 2625 pm_runtime_put_autosuspend(d40c->base->dev); 2626 } 2627 d40c->busy = false; 2628 2629 spin_unlock_irqrestore(&d40c->lock, flags); 2630 } 2631 2632 static int 2633 dma40_config_to_halfchannel(struct d40_chan *d40c, 2634 struct stedma40_half_channel_info *info, 2635 u32 maxburst) 2636 { 2637 int psize; 2638 2639 if (chan_is_logical(d40c)) { 2640 if (maxburst >= 16) 2641 psize = STEDMA40_PSIZE_LOG_16; 2642 else if (maxburst >= 8) 2643 psize = STEDMA40_PSIZE_LOG_8; 2644 else if (maxburst >= 4) 2645 psize = STEDMA40_PSIZE_LOG_4; 2646 else 2647 psize = STEDMA40_PSIZE_LOG_1; 2648 } else { 2649 if (maxburst >= 16) 2650 psize = STEDMA40_PSIZE_PHY_16; 2651 else if (maxburst >= 8) 2652 psize = STEDMA40_PSIZE_PHY_8; 2653 else if (maxburst >= 4) 2654 psize = STEDMA40_PSIZE_PHY_4; 2655 else 2656 psize = STEDMA40_PSIZE_PHY_1; 2657 } 2658 2659 info->psize = psize; 2660 info->flow_ctrl = STEDMA40_NO_FLOW_CTRL; 2661 2662 return 0; 2663 } 2664 2665 /* Runtime reconfiguration extension */ 2666 static int d40_set_runtime_config(struct dma_chan *chan, 2667 struct dma_slave_config *config) 2668 { 2669 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2670 struct stedma40_chan_cfg *cfg = &d40c->dma_cfg; 2671 enum dma_slave_buswidth src_addr_width, dst_addr_width; 2672 dma_addr_t config_addr; 2673 u32 src_maxburst, dst_maxburst; 2674 int ret; 2675 2676 src_addr_width = config->src_addr_width; 2677 src_maxburst = config->src_maxburst; 2678 dst_addr_width = config->dst_addr_width; 2679 dst_maxburst = config->dst_maxburst; 2680 2681 if (config->direction == DMA_DEV_TO_MEM) { 2682 config_addr = config->src_addr; 2683 2684 if (cfg->dir != DMA_DEV_TO_MEM) 2685 dev_dbg(d40c->base->dev, 2686 "channel was not configured for peripheral " 2687 "to memory transfer (%d) overriding\n", 2688 cfg->dir); 2689 cfg->dir = DMA_DEV_TO_MEM; 2690 2691 /* Configure the memory side */ 2692 if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) 2693 dst_addr_width = src_addr_width; 2694 if (dst_maxburst == 0) 2695 dst_maxburst = src_maxburst; 2696 2697 } else if (config->direction == DMA_MEM_TO_DEV) { 2698 config_addr = config->dst_addr; 2699 2700 if (cfg->dir != DMA_MEM_TO_DEV) 2701 dev_dbg(d40c->base->dev, 2702 "channel was not configured for memory " 2703 "to peripheral transfer (%d) overriding\n", 2704 cfg->dir); 2705 cfg->dir = DMA_MEM_TO_DEV; 2706 2707 /* Configure the memory side */ 2708 if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) 2709 src_addr_width = dst_addr_width; 2710 if (src_maxburst == 0) 2711 src_maxburst = dst_maxburst; 2712 } else { 2713 dev_err(d40c->base->dev, 2714 "unrecognized channel direction %d\n", 2715 config->direction); 2716 return -EINVAL; 2717 } 2718 2719 if (config_addr <= 0) { 2720 dev_err(d40c->base->dev, "no address supplied\n"); 2721 return -EINVAL; 2722 } 2723 2724 if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) { 2725 dev_err(d40c->base->dev, 2726 "src/dst width/maxburst mismatch: %d*%d != %d*%d\n", 2727 src_maxburst, 2728 src_addr_width, 2729 dst_maxburst, 2730 dst_addr_width); 2731 return -EINVAL; 2732 } 2733 2734 if (src_maxburst > 16) { 2735 src_maxburst = 16; 2736 dst_maxburst = src_maxburst * src_addr_width / dst_addr_width; 2737 } else if (dst_maxburst > 16) { 2738 dst_maxburst = 16; 2739 src_maxburst = dst_maxburst * dst_addr_width / src_addr_width; 2740 } 2741 2742 /* Only valid widths are; 1, 2, 4 and 8. */ 2743 if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED || 2744 src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES || 2745 dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED || 2746 dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES || 2747 !is_power_of_2(src_addr_width) || 2748 !is_power_of_2(dst_addr_width)) 2749 return -EINVAL; 2750 2751 cfg->src_info.data_width = src_addr_width; 2752 cfg->dst_info.data_width = dst_addr_width; 2753 2754 ret = dma40_config_to_halfchannel(d40c, &cfg->src_info, 2755 src_maxburst); 2756 if (ret) 2757 return ret; 2758 2759 ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info, 2760 dst_maxburst); 2761 if (ret) 2762 return ret; 2763 2764 /* Fill in register values */ 2765 if (chan_is_logical(d40c)) 2766 d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); 2767 else 2768 d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg); 2769 2770 /* These settings will take precedence later */ 2771 d40c->runtime_addr = config_addr; 2772 d40c->runtime_direction = config->direction; 2773 dev_dbg(d40c->base->dev, 2774 "configured channel %s for %s, data width %d/%d, " 2775 "maxburst %d/%d elements, LE, no flow control\n", 2776 dma_chan_name(chan), 2777 (config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX", 2778 src_addr_width, dst_addr_width, 2779 src_maxburst, dst_maxburst); 2780 2781 return 0; 2782 } 2783 2784 static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, 2785 unsigned long arg) 2786 { 2787 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2788 2789 if (d40c->phy_chan == NULL) { 2790 chan_err(d40c, "Channel is not allocated!\n"); 2791 return -EINVAL; 2792 } 2793 2794 switch (cmd) { 2795 case DMA_TERMINATE_ALL: 2796 d40_terminate_all(chan); 2797 return 0; 2798 case DMA_PAUSE: 2799 return d40_pause(d40c); 2800 case DMA_RESUME: 2801 return d40_resume(d40c); 2802 case DMA_SLAVE_CONFIG: 2803 return d40_set_runtime_config(chan, 2804 (struct dma_slave_config *) arg); 2805 default: 2806 break; 2807 } 2808 2809 /* Other commands are unimplemented */ 2810 return -ENXIO; 2811 } 2812 2813 /* Initialization functions */ 2814 2815 static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma, 2816 struct d40_chan *chans, int offset, 2817 int num_chans) 2818 { 2819 int i = 0; 2820 struct d40_chan *d40c; 2821 2822 INIT_LIST_HEAD(&dma->channels); 2823 2824 for (i = offset; i < offset + num_chans; i++) { 2825 d40c = &chans[i]; 2826 d40c->base = base; 2827 d40c->chan.device = dma; 2828 2829 spin_lock_init(&d40c->lock); 2830 2831 d40c->log_num = D40_PHY_CHAN; 2832 2833 INIT_LIST_HEAD(&d40c->done); 2834 INIT_LIST_HEAD(&d40c->active); 2835 INIT_LIST_HEAD(&d40c->queue); 2836 INIT_LIST_HEAD(&d40c->pending_queue); 2837 INIT_LIST_HEAD(&d40c->client); 2838 INIT_LIST_HEAD(&d40c->prepare_queue); 2839 2840 tasklet_init(&d40c->tasklet, dma_tasklet, 2841 (unsigned long) d40c); 2842 2843 list_add_tail(&d40c->chan.device_node, 2844 &dma->channels); 2845 } 2846 } 2847 2848 static void d40_ops_init(struct d40_base *base, struct dma_device *dev) 2849 { 2850 if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) 2851 dev->device_prep_slave_sg = d40_prep_slave_sg; 2852 2853 if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) { 2854 dev->device_prep_dma_memcpy = d40_prep_memcpy; 2855 2856 /* 2857 * This controller can only access address at even 2858 * 32bit boundaries, i.e. 2^2 2859 */ 2860 dev->copy_align = 2; 2861 } 2862 2863 if (dma_has_cap(DMA_SG, dev->cap_mask)) 2864 dev->device_prep_dma_sg = d40_prep_memcpy_sg; 2865 2866 if (dma_has_cap(DMA_CYCLIC, dev->cap_mask)) 2867 dev->device_prep_dma_cyclic = dma40_prep_dma_cyclic; 2868 2869 dev->device_alloc_chan_resources = d40_alloc_chan_resources; 2870 dev->device_free_chan_resources = d40_free_chan_resources; 2871 dev->device_issue_pending = d40_issue_pending; 2872 dev->device_tx_status = d40_tx_status; 2873 dev->device_control = d40_control; 2874 dev->dev = base->dev; 2875 } 2876 2877 static int __init d40_dmaengine_init(struct d40_base *base, 2878 int num_reserved_chans) 2879 { 2880 int err ; 2881 2882 d40_chan_init(base, &base->dma_slave, base->log_chans, 2883 0, base->num_log_chans); 2884 2885 dma_cap_zero(base->dma_slave.cap_mask); 2886 dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask); 2887 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask); 2888 2889 d40_ops_init(base, &base->dma_slave); 2890 2891 err = dma_async_device_register(&base->dma_slave); 2892 2893 if (err) { 2894 d40_err(base->dev, "Failed to register slave channels\n"); 2895 goto failure1; 2896 } 2897 2898 d40_chan_init(base, &base->dma_memcpy, base->log_chans, 2899 base->num_log_chans, base->num_memcpy_chans); 2900 2901 dma_cap_zero(base->dma_memcpy.cap_mask); 2902 dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask); 2903 dma_cap_set(DMA_SG, base->dma_memcpy.cap_mask); 2904 2905 d40_ops_init(base, &base->dma_memcpy); 2906 2907 err = dma_async_device_register(&base->dma_memcpy); 2908 2909 if (err) { 2910 d40_err(base->dev, 2911 "Failed to regsiter memcpy only channels\n"); 2912 goto failure2; 2913 } 2914 2915 d40_chan_init(base, &base->dma_both, base->phy_chans, 2916 0, num_reserved_chans); 2917 2918 dma_cap_zero(base->dma_both.cap_mask); 2919 dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask); 2920 dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask); 2921 dma_cap_set(DMA_SG, base->dma_both.cap_mask); 2922 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask); 2923 2924 d40_ops_init(base, &base->dma_both); 2925 err = dma_async_device_register(&base->dma_both); 2926 2927 if (err) { 2928 d40_err(base->dev, 2929 "Failed to register logical and physical capable channels\n"); 2930 goto failure3; 2931 } 2932 return 0; 2933 failure3: 2934 dma_async_device_unregister(&base->dma_memcpy); 2935 failure2: 2936 dma_async_device_unregister(&base->dma_slave); 2937 failure1: 2938 return err; 2939 } 2940 2941 /* Suspend resume functionality */ 2942 #ifdef CONFIG_PM_SLEEP 2943 static int dma40_suspend(struct device *dev) 2944 { 2945 struct platform_device *pdev = to_platform_device(dev); 2946 struct d40_base *base = platform_get_drvdata(pdev); 2947 int ret; 2948 2949 ret = pm_runtime_force_suspend(dev); 2950 if (ret) 2951 return ret; 2952 2953 if (base->lcpa_regulator) 2954 ret = regulator_disable(base->lcpa_regulator); 2955 return ret; 2956 } 2957 2958 static int dma40_resume(struct device *dev) 2959 { 2960 struct platform_device *pdev = to_platform_device(dev); 2961 struct d40_base *base = platform_get_drvdata(pdev); 2962 int ret = 0; 2963 2964 if (base->lcpa_regulator) { 2965 ret = regulator_enable(base->lcpa_regulator); 2966 if (ret) 2967 return ret; 2968 } 2969 2970 return pm_runtime_force_resume(dev); 2971 } 2972 #endif 2973 2974 #ifdef CONFIG_PM 2975 static void dma40_backup(void __iomem *baseaddr, u32 *backup, 2976 u32 *regaddr, int num, bool save) 2977 { 2978 int i; 2979 2980 for (i = 0; i < num; i++) { 2981 void __iomem *addr = baseaddr + regaddr[i]; 2982 2983 if (save) 2984 backup[i] = readl_relaxed(addr); 2985 else 2986 writel_relaxed(backup[i], addr); 2987 } 2988 } 2989 2990 static void d40_save_restore_registers(struct d40_base *base, bool save) 2991 { 2992 int i; 2993 2994 /* Save/Restore channel specific registers */ 2995 for (i = 0; i < base->num_phy_chans; i++) { 2996 void __iomem *addr; 2997 int idx; 2998 2999 if (base->phy_res[i].reserved) 3000 continue; 3001 3002 addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA; 3003 idx = i * ARRAY_SIZE(d40_backup_regs_chan); 3004 3005 dma40_backup(addr, &base->reg_val_backup_chan[idx], 3006 d40_backup_regs_chan, 3007 ARRAY_SIZE(d40_backup_regs_chan), 3008 save); 3009 } 3010 3011 /* Save/Restore global registers */ 3012 dma40_backup(base->virtbase, base->reg_val_backup, 3013 d40_backup_regs, ARRAY_SIZE(d40_backup_regs), 3014 save); 3015 3016 /* Save/Restore registers only existing on dma40 v3 and later */ 3017 if (base->gen_dmac.backup) 3018 dma40_backup(base->virtbase, base->reg_val_backup_v4, 3019 base->gen_dmac.backup, 3020 base->gen_dmac.backup_size, 3021 save); 3022 } 3023 3024 static int dma40_runtime_suspend(struct device *dev) 3025 { 3026 struct platform_device *pdev = to_platform_device(dev); 3027 struct d40_base *base = platform_get_drvdata(pdev); 3028 3029 d40_save_restore_registers(base, true); 3030 3031 /* Don't disable/enable clocks for v1 due to HW bugs */ 3032 if (base->rev != 1) 3033 writel_relaxed(base->gcc_pwr_off_mask, 3034 base->virtbase + D40_DREG_GCC); 3035 3036 return 0; 3037 } 3038 3039 static int dma40_runtime_resume(struct device *dev) 3040 { 3041 struct platform_device *pdev = to_platform_device(dev); 3042 struct d40_base *base = platform_get_drvdata(pdev); 3043 3044 d40_save_restore_registers(base, false); 3045 3046 writel_relaxed(D40_DREG_GCC_ENABLE_ALL, 3047 base->virtbase + D40_DREG_GCC); 3048 return 0; 3049 } 3050 #endif 3051 3052 static const struct dev_pm_ops dma40_pm_ops = { 3053 SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume) 3054 SET_RUNTIME_PM_OPS(dma40_runtime_suspend, 3055 dma40_runtime_resume, 3056 NULL) 3057 }; 3058 3059 /* Initialization functions. */ 3060 3061 static int __init d40_phy_res_init(struct d40_base *base) 3062 { 3063 int i; 3064 int num_phy_chans_avail = 0; 3065 u32 val[2]; 3066 int odd_even_bit = -2; 3067 int gcc = D40_DREG_GCC_ENA; 3068 3069 val[0] = readl(base->virtbase + D40_DREG_PRSME); 3070 val[1] = readl(base->virtbase + D40_DREG_PRSMO); 3071 3072 for (i = 0; i < base->num_phy_chans; i++) { 3073 base->phy_res[i].num = i; 3074 odd_even_bit += 2 * ((i % 2) == 0); 3075 if (((val[i % 2] >> odd_even_bit) & 3) == 1) { 3076 /* Mark security only channels as occupied */ 3077 base->phy_res[i].allocated_src = D40_ALLOC_PHY; 3078 base->phy_res[i].allocated_dst = D40_ALLOC_PHY; 3079 base->phy_res[i].reserved = true; 3080 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i), 3081 D40_DREG_GCC_SRC); 3082 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i), 3083 D40_DREG_GCC_DST); 3084 3085 3086 } else { 3087 base->phy_res[i].allocated_src = D40_ALLOC_FREE; 3088 base->phy_res[i].allocated_dst = D40_ALLOC_FREE; 3089 base->phy_res[i].reserved = false; 3090 num_phy_chans_avail++; 3091 } 3092 spin_lock_init(&base->phy_res[i].lock); 3093 } 3094 3095 /* Mark disabled channels as occupied */ 3096 for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) { 3097 int chan = base->plat_data->disabled_channels[i]; 3098 3099 base->phy_res[chan].allocated_src = D40_ALLOC_PHY; 3100 base->phy_res[chan].allocated_dst = D40_ALLOC_PHY; 3101 base->phy_res[chan].reserved = true; 3102 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan), 3103 D40_DREG_GCC_SRC); 3104 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan), 3105 D40_DREG_GCC_DST); 3106 num_phy_chans_avail--; 3107 } 3108 3109 /* Mark soft_lli channels */ 3110 for (i = 0; i < base->plat_data->num_of_soft_lli_chans; i++) { 3111 int chan = base->plat_data->soft_lli_chans[i]; 3112 3113 base->phy_res[chan].use_soft_lli = true; 3114 } 3115 3116 dev_info(base->dev, "%d of %d physical DMA channels available\n", 3117 num_phy_chans_avail, base->num_phy_chans); 3118 3119 /* Verify settings extended vs standard */ 3120 val[0] = readl(base->virtbase + D40_DREG_PRTYP); 3121 3122 for (i = 0; i < base->num_phy_chans; i++) { 3123 3124 if (base->phy_res[i].allocated_src == D40_ALLOC_FREE && 3125 (val[0] & 0x3) != 1) 3126 dev_info(base->dev, 3127 "[%s] INFO: channel %d is misconfigured (%d)\n", 3128 __func__, i, val[0] & 0x3); 3129 3130 val[0] = val[0] >> 2; 3131 } 3132 3133 /* 3134 * To keep things simple, Enable all clocks initially. 3135 * The clocks will get managed later post channel allocation. 3136 * The clocks for the event lines on which reserved channels exists 3137 * are not managed here. 3138 */ 3139 writel(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC); 3140 base->gcc_pwr_off_mask = gcc; 3141 3142 return num_phy_chans_avail; 3143 } 3144 3145 static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) 3146 { 3147 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev); 3148 struct clk *clk = NULL; 3149 void __iomem *virtbase = NULL; 3150 struct resource *res = NULL; 3151 struct d40_base *base = NULL; 3152 int num_log_chans = 0; 3153 int num_phy_chans; 3154 int num_memcpy_chans; 3155 int clk_ret = -EINVAL; 3156 int i; 3157 u32 pid; 3158 u32 cid; 3159 u8 rev; 3160 3161 clk = clk_get(&pdev->dev, NULL); 3162 if (IS_ERR(clk)) { 3163 d40_err(&pdev->dev, "No matching clock found\n"); 3164 goto failure; 3165 } 3166 3167 clk_ret = clk_prepare_enable(clk); 3168 if (clk_ret) { 3169 d40_err(&pdev->dev, "Failed to prepare/enable clock\n"); 3170 goto failure; 3171 } 3172 3173 /* Get IO for DMAC base address */ 3174 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base"); 3175 if (!res) 3176 goto failure; 3177 3178 if (request_mem_region(res->start, resource_size(res), 3179 D40_NAME " I/O base") == NULL) 3180 goto failure; 3181 3182 virtbase = ioremap(res->start, resource_size(res)); 3183 if (!virtbase) 3184 goto failure; 3185 3186 /* This is just a regular AMBA PrimeCell ID actually */ 3187 for (pid = 0, i = 0; i < 4; i++) 3188 pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i) 3189 & 255) << (i * 8); 3190 for (cid = 0, i = 0; i < 4; i++) 3191 cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i) 3192 & 255) << (i * 8); 3193 3194 if (cid != AMBA_CID) { 3195 d40_err(&pdev->dev, "Unknown hardware! No PrimeCell ID\n"); 3196 goto failure; 3197 } 3198 if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) { 3199 d40_err(&pdev->dev, "Unknown designer! Got %x wanted %x\n", 3200 AMBA_MANF_BITS(pid), 3201 AMBA_VENDOR_ST); 3202 goto failure; 3203 } 3204 /* 3205 * HW revision: 3206 * DB8500ed has revision 0 3207 * ? has revision 1 3208 * DB8500v1 has revision 2 3209 * DB8500v2 has revision 3 3210 * AP9540v1 has revision 4 3211 * DB8540v1 has revision 4 3212 */ 3213 rev = AMBA_REV_BITS(pid); 3214 if (rev < 2) { 3215 d40_err(&pdev->dev, "hardware revision: %d is not supported", rev); 3216 goto failure; 3217 } 3218 3219 /* The number of physical channels on this HW */ 3220 if (plat_data->num_of_phy_chans) 3221 num_phy_chans = plat_data->num_of_phy_chans; 3222 else 3223 num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4; 3224 3225 /* The number of channels used for memcpy */ 3226 if (plat_data->num_of_memcpy_chans) 3227 num_memcpy_chans = plat_data->num_of_memcpy_chans; 3228 else 3229 num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels); 3230 3231 num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY; 3232 3233 dev_info(&pdev->dev, 3234 "hardware rev: %d @ %pa with %d physical and %d logical channels\n", 3235 rev, &res->start, num_phy_chans, num_log_chans); 3236 3237 base = kzalloc(ALIGN(sizeof(struct d40_base), 4) + 3238 (num_phy_chans + num_log_chans + num_memcpy_chans) * 3239 sizeof(struct d40_chan), GFP_KERNEL); 3240 3241 if (base == NULL) { 3242 d40_err(&pdev->dev, "Out of memory\n"); 3243 goto failure; 3244 } 3245 3246 base->rev = rev; 3247 base->clk = clk; 3248 base->num_memcpy_chans = num_memcpy_chans; 3249 base->num_phy_chans = num_phy_chans; 3250 base->num_log_chans = num_log_chans; 3251 base->phy_start = res->start; 3252 base->phy_size = resource_size(res); 3253 base->virtbase = virtbase; 3254 base->plat_data = plat_data; 3255 base->dev = &pdev->dev; 3256 base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4); 3257 base->log_chans = &base->phy_chans[num_phy_chans]; 3258 3259 if (base->plat_data->num_of_phy_chans == 14) { 3260 base->gen_dmac.backup = d40_backup_regs_v4b; 3261 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B; 3262 base->gen_dmac.interrupt_en = D40_DREG_CPCMIS; 3263 base->gen_dmac.interrupt_clear = D40_DREG_CPCICR; 3264 base->gen_dmac.realtime_en = D40_DREG_CRSEG1; 3265 base->gen_dmac.realtime_clear = D40_DREG_CRCEG1; 3266 base->gen_dmac.high_prio_en = D40_DREG_CPSEG1; 3267 base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1; 3268 base->gen_dmac.il = il_v4b; 3269 base->gen_dmac.il_size = ARRAY_SIZE(il_v4b); 3270 base->gen_dmac.init_reg = dma_init_reg_v4b; 3271 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b); 3272 } else { 3273 if (base->rev >= 3) { 3274 base->gen_dmac.backup = d40_backup_regs_v4a; 3275 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A; 3276 } 3277 base->gen_dmac.interrupt_en = D40_DREG_PCMIS; 3278 base->gen_dmac.interrupt_clear = D40_DREG_PCICR; 3279 base->gen_dmac.realtime_en = D40_DREG_RSEG1; 3280 base->gen_dmac.realtime_clear = D40_DREG_RCEG1; 3281 base->gen_dmac.high_prio_en = D40_DREG_PSEG1; 3282 base->gen_dmac.high_prio_clear = D40_DREG_PCEG1; 3283 base->gen_dmac.il = il_v4a; 3284 base->gen_dmac.il_size = ARRAY_SIZE(il_v4a); 3285 base->gen_dmac.init_reg = dma_init_reg_v4a; 3286 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a); 3287 } 3288 3289 base->phy_res = kzalloc(num_phy_chans * sizeof(struct d40_phy_res), 3290 GFP_KERNEL); 3291 if (!base->phy_res) 3292 goto failure; 3293 3294 base->lookup_phy_chans = kzalloc(num_phy_chans * 3295 sizeof(struct d40_chan *), 3296 GFP_KERNEL); 3297 if (!base->lookup_phy_chans) 3298 goto failure; 3299 3300 base->lookup_log_chans = kzalloc(num_log_chans * 3301 sizeof(struct d40_chan *), 3302 GFP_KERNEL); 3303 if (!base->lookup_log_chans) 3304 goto failure; 3305 3306 base->reg_val_backup_chan = kmalloc(base->num_phy_chans * 3307 sizeof(d40_backup_regs_chan), 3308 GFP_KERNEL); 3309 if (!base->reg_val_backup_chan) 3310 goto failure; 3311 3312 base->lcla_pool.alloc_map = 3313 kzalloc(num_phy_chans * sizeof(struct d40_desc *) 3314 * D40_LCLA_LINK_PER_EVENT_GRP, GFP_KERNEL); 3315 if (!base->lcla_pool.alloc_map) 3316 goto failure; 3317 3318 base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc), 3319 0, SLAB_HWCACHE_ALIGN, 3320 NULL); 3321 if (base->desc_slab == NULL) 3322 goto failure; 3323 3324 return base; 3325 3326 failure: 3327 if (!clk_ret) 3328 clk_disable_unprepare(clk); 3329 if (!IS_ERR(clk)) 3330 clk_put(clk); 3331 if (virtbase) 3332 iounmap(virtbase); 3333 if (res) 3334 release_mem_region(res->start, 3335 resource_size(res)); 3336 if (virtbase) 3337 iounmap(virtbase); 3338 3339 if (base) { 3340 kfree(base->lcla_pool.alloc_map); 3341 kfree(base->reg_val_backup_chan); 3342 kfree(base->lookup_log_chans); 3343 kfree(base->lookup_phy_chans); 3344 kfree(base->phy_res); 3345 kfree(base); 3346 } 3347 3348 return NULL; 3349 } 3350 3351 static void __init d40_hw_init(struct d40_base *base) 3352 { 3353 3354 int i; 3355 u32 prmseo[2] = {0, 0}; 3356 u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF}; 3357 u32 pcmis = 0; 3358 u32 pcicr = 0; 3359 struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg; 3360 u32 reg_size = base->gen_dmac.init_reg_size; 3361 3362 for (i = 0; i < reg_size; i++) 3363 writel(dma_init_reg[i].val, 3364 base->virtbase + dma_init_reg[i].reg); 3365 3366 /* Configure all our dma channels to default settings */ 3367 for (i = 0; i < base->num_phy_chans; i++) { 3368 3369 activeo[i % 2] = activeo[i % 2] << 2; 3370 3371 if (base->phy_res[base->num_phy_chans - i - 1].allocated_src 3372 == D40_ALLOC_PHY) { 3373 activeo[i % 2] |= 3; 3374 continue; 3375 } 3376 3377 /* Enable interrupt # */ 3378 pcmis = (pcmis << 1) | 1; 3379 3380 /* Clear interrupt # */ 3381 pcicr = (pcicr << 1) | 1; 3382 3383 /* Set channel to physical mode */ 3384 prmseo[i % 2] = prmseo[i % 2] << 2; 3385 prmseo[i % 2] |= 1; 3386 3387 } 3388 3389 writel(prmseo[1], base->virtbase + D40_DREG_PRMSE); 3390 writel(prmseo[0], base->virtbase + D40_DREG_PRMSO); 3391 writel(activeo[1], base->virtbase + D40_DREG_ACTIVE); 3392 writel(activeo[0], base->virtbase + D40_DREG_ACTIVO); 3393 3394 /* Write which interrupt to enable */ 3395 writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en); 3396 3397 /* Write which interrupt to clear */ 3398 writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear); 3399 3400 /* These are __initdata and cannot be accessed after init */ 3401 base->gen_dmac.init_reg = NULL; 3402 base->gen_dmac.init_reg_size = 0; 3403 } 3404 3405 static int __init d40_lcla_allocate(struct d40_base *base) 3406 { 3407 struct d40_lcla_pool *pool = &base->lcla_pool; 3408 unsigned long *page_list; 3409 int i, j; 3410 int ret = 0; 3411 3412 /* 3413 * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned, 3414 * To full fill this hardware requirement without wasting 256 kb 3415 * we allocate pages until we get an aligned one. 3416 */ 3417 page_list = kmalloc(sizeof(unsigned long) * MAX_LCLA_ALLOC_ATTEMPTS, 3418 GFP_KERNEL); 3419 3420 if (!page_list) { 3421 ret = -ENOMEM; 3422 goto failure; 3423 } 3424 3425 /* Calculating how many pages that are required */ 3426 base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE; 3427 3428 for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) { 3429 page_list[i] = __get_free_pages(GFP_KERNEL, 3430 base->lcla_pool.pages); 3431 if (!page_list[i]) { 3432 3433 d40_err(base->dev, "Failed to allocate %d pages.\n", 3434 base->lcla_pool.pages); 3435 ret = -ENOMEM; 3436 3437 for (j = 0; j < i; j++) 3438 free_pages(page_list[j], base->lcla_pool.pages); 3439 goto failure; 3440 } 3441 3442 if ((virt_to_phys((void *)page_list[i]) & 3443 (LCLA_ALIGNMENT - 1)) == 0) 3444 break; 3445 } 3446 3447 for (j = 0; j < i; j++) 3448 free_pages(page_list[j], base->lcla_pool.pages); 3449 3450 if (i < MAX_LCLA_ALLOC_ATTEMPTS) { 3451 base->lcla_pool.base = (void *)page_list[i]; 3452 } else { 3453 /* 3454 * After many attempts and no succees with finding the correct 3455 * alignment, try with allocating a big buffer. 3456 */ 3457 dev_warn(base->dev, 3458 "[%s] Failed to get %d pages @ 18 bit align.\n", 3459 __func__, base->lcla_pool.pages); 3460 base->lcla_pool.base_unaligned = kmalloc(SZ_1K * 3461 base->num_phy_chans + 3462 LCLA_ALIGNMENT, 3463 GFP_KERNEL); 3464 if (!base->lcla_pool.base_unaligned) { 3465 ret = -ENOMEM; 3466 goto failure; 3467 } 3468 3469 base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned, 3470 LCLA_ALIGNMENT); 3471 } 3472 3473 pool->dma_addr = dma_map_single(base->dev, pool->base, 3474 SZ_1K * base->num_phy_chans, 3475 DMA_TO_DEVICE); 3476 if (dma_mapping_error(base->dev, pool->dma_addr)) { 3477 pool->dma_addr = 0; 3478 ret = -ENOMEM; 3479 goto failure; 3480 } 3481 3482 writel(virt_to_phys(base->lcla_pool.base), 3483 base->virtbase + D40_DREG_LCLA); 3484 failure: 3485 kfree(page_list); 3486 return ret; 3487 } 3488 3489 static int __init d40_of_probe(struct platform_device *pdev, 3490 struct device_node *np) 3491 { 3492 struct stedma40_platform_data *pdata; 3493 int num_phy = 0, num_memcpy = 0, num_disabled = 0; 3494 const __be32 *list; 3495 3496 pdata = devm_kzalloc(&pdev->dev, 3497 sizeof(struct stedma40_platform_data), 3498 GFP_KERNEL); 3499 if (!pdata) 3500 return -ENOMEM; 3501 3502 /* If absent this value will be obtained from h/w. */ 3503 of_property_read_u32(np, "dma-channels", &num_phy); 3504 if (num_phy > 0) 3505 pdata->num_of_phy_chans = num_phy; 3506 3507 list = of_get_property(np, "memcpy-channels", &num_memcpy); 3508 num_memcpy /= sizeof(*list); 3509 3510 if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) { 3511 d40_err(&pdev->dev, 3512 "Invalid number of memcpy channels specified (%d)\n", 3513 num_memcpy); 3514 return -EINVAL; 3515 } 3516 pdata->num_of_memcpy_chans = num_memcpy; 3517 3518 of_property_read_u32_array(np, "memcpy-channels", 3519 dma40_memcpy_channels, 3520 num_memcpy); 3521 3522 list = of_get_property(np, "disabled-channels", &num_disabled); 3523 num_disabled /= sizeof(*list); 3524 3525 if (num_disabled >= STEDMA40_MAX_PHYS || num_disabled < 0) { 3526 d40_err(&pdev->dev, 3527 "Invalid number of disabled channels specified (%d)\n", 3528 num_disabled); 3529 return -EINVAL; 3530 } 3531 3532 of_property_read_u32_array(np, "disabled-channels", 3533 pdata->disabled_channels, 3534 num_disabled); 3535 pdata->disabled_channels[num_disabled] = -1; 3536 3537 pdev->dev.platform_data = pdata; 3538 3539 return 0; 3540 } 3541 3542 static int __init d40_probe(struct platform_device *pdev) 3543 { 3544 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev); 3545 struct device_node *np = pdev->dev.of_node; 3546 int ret = -ENOENT; 3547 struct d40_base *base = NULL; 3548 struct resource *res = NULL; 3549 int num_reserved_chans; 3550 u32 val; 3551 3552 if (!plat_data) { 3553 if (np) { 3554 if(d40_of_probe(pdev, np)) { 3555 ret = -ENOMEM; 3556 goto failure; 3557 } 3558 } else { 3559 d40_err(&pdev->dev, "No pdata or Device Tree provided\n"); 3560 goto failure; 3561 } 3562 } 3563 3564 base = d40_hw_detect_init(pdev); 3565 if (!base) 3566 goto failure; 3567 3568 num_reserved_chans = d40_phy_res_init(base); 3569 3570 platform_set_drvdata(pdev, base); 3571 3572 spin_lock_init(&base->interrupt_lock); 3573 spin_lock_init(&base->execmd_lock); 3574 3575 /* Get IO for logical channel parameter address */ 3576 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lcpa"); 3577 if (!res) { 3578 ret = -ENOENT; 3579 d40_err(&pdev->dev, "No \"lcpa\" memory resource\n"); 3580 goto failure; 3581 } 3582 base->lcpa_size = resource_size(res); 3583 base->phy_lcpa = res->start; 3584 3585 if (request_mem_region(res->start, resource_size(res), 3586 D40_NAME " I/O lcpa") == NULL) { 3587 ret = -EBUSY; 3588 d40_err(&pdev->dev, "Failed to request LCPA region %pR\n", res); 3589 goto failure; 3590 } 3591 3592 /* We make use of ESRAM memory for this. */ 3593 val = readl(base->virtbase + D40_DREG_LCPA); 3594 if (res->start != val && val != 0) { 3595 dev_warn(&pdev->dev, 3596 "[%s] Mismatch LCPA dma 0x%x, def %pa\n", 3597 __func__, val, &res->start); 3598 } else 3599 writel(res->start, base->virtbase + D40_DREG_LCPA); 3600 3601 base->lcpa_base = ioremap(res->start, resource_size(res)); 3602 if (!base->lcpa_base) { 3603 ret = -ENOMEM; 3604 d40_err(&pdev->dev, "Failed to ioremap LCPA region\n"); 3605 goto failure; 3606 } 3607 /* If lcla has to be located in ESRAM we don't need to allocate */ 3608 if (base->plat_data->use_esram_lcla) { 3609 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 3610 "lcla_esram"); 3611 if (!res) { 3612 ret = -ENOENT; 3613 d40_err(&pdev->dev, 3614 "No \"lcla_esram\" memory resource\n"); 3615 goto failure; 3616 } 3617 base->lcla_pool.base = ioremap(res->start, 3618 resource_size(res)); 3619 if (!base->lcla_pool.base) { 3620 ret = -ENOMEM; 3621 d40_err(&pdev->dev, "Failed to ioremap LCLA region\n"); 3622 goto failure; 3623 } 3624 writel(res->start, base->virtbase + D40_DREG_LCLA); 3625 3626 } else { 3627 ret = d40_lcla_allocate(base); 3628 if (ret) { 3629 d40_err(&pdev->dev, "Failed to allocate LCLA area\n"); 3630 goto failure; 3631 } 3632 } 3633 3634 spin_lock_init(&base->lcla_pool.lock); 3635 3636 base->irq = platform_get_irq(pdev, 0); 3637 3638 ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base); 3639 if (ret) { 3640 d40_err(&pdev->dev, "No IRQ defined\n"); 3641 goto failure; 3642 } 3643 3644 if (base->plat_data->use_esram_lcla) { 3645 3646 base->lcpa_regulator = regulator_get(base->dev, "lcla_esram"); 3647 if (IS_ERR(base->lcpa_regulator)) { 3648 d40_err(&pdev->dev, "Failed to get lcpa_regulator\n"); 3649 ret = PTR_ERR(base->lcpa_regulator); 3650 base->lcpa_regulator = NULL; 3651 goto failure; 3652 } 3653 3654 ret = regulator_enable(base->lcpa_regulator); 3655 if (ret) { 3656 d40_err(&pdev->dev, 3657 "Failed to enable lcpa_regulator\n"); 3658 regulator_put(base->lcpa_regulator); 3659 base->lcpa_regulator = NULL; 3660 goto failure; 3661 } 3662 } 3663 3664 writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC); 3665 3666 pm_runtime_irq_safe(base->dev); 3667 pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY); 3668 pm_runtime_use_autosuspend(base->dev); 3669 pm_runtime_mark_last_busy(base->dev); 3670 pm_runtime_set_active(base->dev); 3671 pm_runtime_enable(base->dev); 3672 3673 ret = d40_dmaengine_init(base, num_reserved_chans); 3674 if (ret) 3675 goto failure; 3676 3677 base->dev->dma_parms = &base->dma_parms; 3678 ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE); 3679 if (ret) { 3680 d40_err(&pdev->dev, "Failed to set dma max seg size\n"); 3681 goto failure; 3682 } 3683 3684 d40_hw_init(base); 3685 3686 if (np) { 3687 ret = of_dma_controller_register(np, d40_xlate, NULL); 3688 if (ret) 3689 dev_err(&pdev->dev, 3690 "could not register of_dma_controller\n"); 3691 } 3692 3693 dev_info(base->dev, "initialized\n"); 3694 return 0; 3695 3696 failure: 3697 if (base) { 3698 if (base->desc_slab) 3699 kmem_cache_destroy(base->desc_slab); 3700 if (base->virtbase) 3701 iounmap(base->virtbase); 3702 3703 if (base->lcla_pool.base && base->plat_data->use_esram_lcla) { 3704 iounmap(base->lcla_pool.base); 3705 base->lcla_pool.base = NULL; 3706 } 3707 3708 if (base->lcla_pool.dma_addr) 3709 dma_unmap_single(base->dev, base->lcla_pool.dma_addr, 3710 SZ_1K * base->num_phy_chans, 3711 DMA_TO_DEVICE); 3712 3713 if (!base->lcla_pool.base_unaligned && base->lcla_pool.base) 3714 free_pages((unsigned long)base->lcla_pool.base, 3715 base->lcla_pool.pages); 3716 3717 kfree(base->lcla_pool.base_unaligned); 3718 3719 if (base->phy_lcpa) 3720 release_mem_region(base->phy_lcpa, 3721 base->lcpa_size); 3722 if (base->phy_start) 3723 release_mem_region(base->phy_start, 3724 base->phy_size); 3725 if (base->clk) { 3726 clk_disable_unprepare(base->clk); 3727 clk_put(base->clk); 3728 } 3729 3730 if (base->lcpa_regulator) { 3731 regulator_disable(base->lcpa_regulator); 3732 regulator_put(base->lcpa_regulator); 3733 } 3734 3735 kfree(base->lcla_pool.alloc_map); 3736 kfree(base->lookup_log_chans); 3737 kfree(base->lookup_phy_chans); 3738 kfree(base->phy_res); 3739 kfree(base); 3740 } 3741 3742 d40_err(&pdev->dev, "probe failed\n"); 3743 return ret; 3744 } 3745 3746 static const struct of_device_id d40_match[] = { 3747 { .compatible = "stericsson,dma40", }, 3748 {} 3749 }; 3750 3751 static struct platform_driver d40_driver = { 3752 .driver = { 3753 .name = D40_NAME, 3754 .pm = &dma40_pm_ops, 3755 .of_match_table = d40_match, 3756 }, 3757 }; 3758 3759 static int __init stedma40_init(void) 3760 { 3761 return platform_driver_probe(&d40_driver, d40_probe); 3762 } 3763 subsys_initcall(stedma40_init); 3764