1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd. 4 * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> 5 */ 6 7 #include <linux/bitmap.h> 8 #include <linux/bitops.h> 9 #include <linux/clk.h> 10 #include <linux/dma-mapping.h> 11 #include <linux/dmaengine.h> 12 #include <linux/err.h> 13 #include <linux/interrupt.h> 14 #include <linux/io.h> 15 #include <linux/log2.h> 16 #include <linux/module.h> 17 #include <linux/of.h> 18 #include <linux/of_dma.h> 19 #include <linux/platform_device.h> 20 #include <linux/slab.h> 21 22 #include <dt-bindings/dma/nbpfaxi.h> 23 24 #include "dmaengine.h" 25 26 #define NBPF_REG_CHAN_OFFSET 0 27 #define NBPF_REG_CHAN_SIZE 0x40 28 29 /* Channel Current Transaction Byte register */ 30 #define NBPF_CHAN_CUR_TR_BYTE 0x20 31 32 /* Channel Status register */ 33 #define NBPF_CHAN_STAT 0x24 34 #define NBPF_CHAN_STAT_EN 1 35 #define NBPF_CHAN_STAT_TACT 4 36 #define NBPF_CHAN_STAT_ERR 0x10 37 #define NBPF_CHAN_STAT_END 0x20 38 #define NBPF_CHAN_STAT_TC 0x40 39 #define NBPF_CHAN_STAT_DER 0x400 40 41 /* Channel Control register */ 42 #define NBPF_CHAN_CTRL 0x28 43 #define NBPF_CHAN_CTRL_SETEN 1 44 #define NBPF_CHAN_CTRL_CLREN 2 45 #define NBPF_CHAN_CTRL_STG 4 46 #define NBPF_CHAN_CTRL_SWRST 8 47 #define NBPF_CHAN_CTRL_CLRRQ 0x10 48 #define NBPF_CHAN_CTRL_CLREND 0x20 49 #define NBPF_CHAN_CTRL_CLRTC 0x40 50 #define NBPF_CHAN_CTRL_SETSUS 0x100 51 #define NBPF_CHAN_CTRL_CLRSUS 0x200 52 53 /* Channel Configuration register */ 54 #define NBPF_CHAN_CFG 0x2c 55 #define NBPF_CHAN_CFG_SEL 7 /* terminal SELect: 0..7 */ 56 #define NBPF_CHAN_CFG_REQD 8 /* REQuest Direction: DMAREQ is 0: input, 1: output */ 57 #define NBPF_CHAN_CFG_LOEN 0x10 /* LOw ENable: low DMA request line is: 0: inactive, 1: active */ 58 #define NBPF_CHAN_CFG_HIEN 0x20 /* HIgh ENable: high DMA request line is: 0: inactive, 1: active */ 59 #define NBPF_CHAN_CFG_LVL 0x40 /* LeVeL: DMA request line is sensed as 0: edge, 1: level */ 60 #define NBPF_CHAN_CFG_AM 0x700 /* ACK Mode: 0: Pulse mode, 1: Level mode, b'1x: Bus Cycle */ 61 #define NBPF_CHAN_CFG_SDS 0xf000 /* Source Data Size: 0: 8 bits,... , 7: 1024 bits */ 62 #define NBPF_CHAN_CFG_DDS 0xf0000 /* Destination Data Size: as above */ 63 #define NBPF_CHAN_CFG_SAD 0x100000 /* Source ADdress counting: 0: increment, 1: fixed */ 64 #define NBPF_CHAN_CFG_DAD 0x200000 /* Destination ADdress counting: 0: increment, 1: fixed */ 65 #define NBPF_CHAN_CFG_TM 0x400000 /* Transfer Mode: 0: single, 1: block TM */ 66 #define NBPF_CHAN_CFG_DEM 0x1000000 /* DMAEND interrupt Mask */ 67 #define NBPF_CHAN_CFG_TCM 0x2000000 /* DMATCO interrupt Mask */ 68 #define NBPF_CHAN_CFG_SBE 0x8000000 /* Sweep Buffer Enable */ 69 #define NBPF_CHAN_CFG_RSEL 0x10000000 /* RM: Register Set sELect */ 70 #define NBPF_CHAN_CFG_RSW 0x20000000 /* RM: Register Select sWitch */ 71 #define NBPF_CHAN_CFG_REN 0x40000000 /* RM: Register Set Enable */ 72 #define NBPF_CHAN_CFG_DMS 0x80000000 /* 0: register mode (RM), 1: link mode (LM) */ 73 74 #define NBPF_CHAN_NXLA 0x38 75 #define NBPF_CHAN_CRLA 0x3c 76 77 /* Link Header field */ 78 #define NBPF_HEADER_LV 1 79 #define NBPF_HEADER_LE 2 80 #define NBPF_HEADER_WBD 4 81 #define NBPF_HEADER_DIM 8 82 83 #define NBPF_CTRL 0x300 84 #define NBPF_CTRL_PR 1 /* 0: fixed priority, 1: round robin */ 85 #define NBPF_CTRL_LVINT 2 /* DMAEND and DMAERR signalling: 0: pulse, 1: level */ 86 87 #define NBPF_DSTAT_ER 0x314 88 #define NBPF_DSTAT_END 0x318 89 90 #define NBPF_DMA_BUSWIDTHS \ 91 (BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \ 92 BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \ 93 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \ 94 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \ 95 BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)) 96 97 struct nbpf_config { 98 int num_channels; 99 int buffer_size; 100 }; 101 102 /* 103 * We've got 3 types of objects, used to describe DMA transfers: 104 * 1. high-level descriptor, containing a struct dma_async_tx_descriptor object 105 * in it, used to communicate with the user 106 * 2. hardware DMA link descriptors, that we pass to DMAC for DMA transfer 107 * queuing, these must be DMAable, using either the streaming DMA API or 108 * allocated from coherent memory - one per SG segment 109 * 3. one per SG segment descriptors, used to manage HW link descriptors from 110 * (2). They do not have to be DMAable. They can either be (a) allocated 111 * together with link descriptors as mixed (DMA / CPU) objects, or (b) 112 * separately. Even if allocated separately it would be best to link them 113 * to link descriptors once during channel resource allocation and always 114 * use them as a single object. 115 * Therefore for both cases (a) and (b) at run-time objects (2) and (3) shall be 116 * treated as a single SG segment descriptor. 117 */ 118 119 struct nbpf_link_reg { 120 u32 header; 121 u32 src_addr; 122 u32 dst_addr; 123 u32 transaction_size; 124 u32 config; 125 u32 interval; 126 u32 extension; 127 u32 next; 128 } __packed; 129 130 struct nbpf_device; 131 struct nbpf_channel; 132 struct nbpf_desc; 133 134 struct nbpf_link_desc { 135 struct nbpf_link_reg *hwdesc; 136 dma_addr_t hwdesc_dma_addr; 137 struct nbpf_desc *desc; 138 struct list_head node; 139 }; 140 141 /** 142 * struct nbpf_desc - DMA transfer descriptor 143 * @async_tx: dmaengine object 144 * @user_wait: waiting for a user ack 145 * @length: total transfer length 146 * @chan: associated DMAC channel 147 * @sg: list of hardware descriptors, represented by struct nbpf_link_desc 148 * @node: member in channel descriptor lists 149 */ 150 struct nbpf_desc { 151 struct dma_async_tx_descriptor async_tx; 152 bool user_wait; 153 size_t length; 154 struct nbpf_channel *chan; 155 struct list_head sg; 156 struct list_head node; 157 }; 158 159 /* Take a wild guess: allocate 4 segments per descriptor */ 160 #define NBPF_SEGMENTS_PER_DESC 4 161 #define NBPF_DESCS_PER_PAGE ((PAGE_SIZE - sizeof(struct list_head)) / \ 162 (sizeof(struct nbpf_desc) + \ 163 NBPF_SEGMENTS_PER_DESC * \ 164 (sizeof(struct nbpf_link_desc) + sizeof(struct nbpf_link_reg)))) 165 #define NBPF_SEGMENTS_PER_PAGE (NBPF_SEGMENTS_PER_DESC * NBPF_DESCS_PER_PAGE) 166 167 struct nbpf_desc_page { 168 struct list_head node; 169 struct nbpf_desc desc[NBPF_DESCS_PER_PAGE]; 170 struct nbpf_link_desc ldesc[NBPF_SEGMENTS_PER_PAGE]; 171 struct nbpf_link_reg hwdesc[NBPF_SEGMENTS_PER_PAGE]; 172 }; 173 174 /** 175 * struct nbpf_channel - one DMAC channel 176 * @dma_chan: standard dmaengine channel object 177 * @tasklet: channel specific tasklet used for callbacks 178 * @base: register address base 179 * @nbpf: DMAC 180 * @name: IRQ name 181 * @irq: IRQ number 182 * @slave_src_addr: source address for slave DMA 183 * @slave_src_width: source slave data size in bytes 184 * @slave_src_burst: maximum source slave burst size in bytes 185 * @slave_dst_addr: destination address for slave DMA 186 * @slave_dst_width: destination slave data size in bytes 187 * @slave_dst_burst: maximum destination slave burst size in bytes 188 * @terminal: DMA terminal, assigned to this channel 189 * @dmarq_cfg: DMA request line configuration - high / low, edge / level for NBPF_CHAN_CFG 190 * @flags: configuration flags from DT 191 * @lock: protect descriptor lists 192 * @free_links: list of free link descriptors 193 * @free: list of free descriptors 194 * @queued: list of queued descriptors 195 * @active: list of descriptors, scheduled for processing 196 * @done: list of completed descriptors, waiting post-processing 197 * @desc_page: list of additionally allocated descriptor pages - if any 198 * @running: linked descriptor of running transaction 199 * @paused: are translations on this channel paused? 200 */ 201 struct nbpf_channel { 202 struct dma_chan dma_chan; 203 struct tasklet_struct tasklet; 204 void __iomem *base; 205 struct nbpf_device *nbpf; 206 char name[16]; 207 int irq; 208 dma_addr_t slave_src_addr; 209 size_t slave_src_width; 210 size_t slave_src_burst; 211 dma_addr_t slave_dst_addr; 212 size_t slave_dst_width; 213 size_t slave_dst_burst; 214 unsigned int terminal; 215 u32 dmarq_cfg; 216 unsigned long flags; 217 spinlock_t lock; 218 struct list_head free_links; 219 struct list_head free; 220 struct list_head queued; 221 struct list_head active; 222 struct list_head done; 223 struct list_head desc_page; 224 struct nbpf_desc *running; 225 bool paused; 226 }; 227 228 struct nbpf_device { 229 struct dma_device dma_dev; 230 void __iomem *base; 231 u32 max_burst_mem_read; 232 u32 max_burst_mem_write; 233 struct clk *clk; 234 const struct nbpf_config *config; 235 unsigned int eirq; 236 struct nbpf_channel chan[]; 237 }; 238 239 enum nbpf_model { 240 NBPF1B4, 241 NBPF1B8, 242 NBPF1B16, 243 NBPF4B4, 244 NBPF4B8, 245 NBPF4B16, 246 NBPF8B4, 247 NBPF8B8, 248 NBPF8B16, 249 }; 250 251 static struct nbpf_config nbpf_cfg[] = { 252 [NBPF1B4] = { 253 .num_channels = 1, 254 .buffer_size = 4, 255 }, 256 [NBPF1B8] = { 257 .num_channels = 1, 258 .buffer_size = 8, 259 }, 260 [NBPF1B16] = { 261 .num_channels = 1, 262 .buffer_size = 16, 263 }, 264 [NBPF4B4] = { 265 .num_channels = 4, 266 .buffer_size = 4, 267 }, 268 [NBPF4B8] = { 269 .num_channels = 4, 270 .buffer_size = 8, 271 }, 272 [NBPF4B16] = { 273 .num_channels = 4, 274 .buffer_size = 16, 275 }, 276 [NBPF8B4] = { 277 .num_channels = 8, 278 .buffer_size = 4, 279 }, 280 [NBPF8B8] = { 281 .num_channels = 8, 282 .buffer_size = 8, 283 }, 284 [NBPF8B16] = { 285 .num_channels = 8, 286 .buffer_size = 16, 287 }, 288 }; 289 290 #define nbpf_to_chan(d) container_of(d, struct nbpf_channel, dma_chan) 291 292 /* 293 * dmaengine drivers seem to have a lot in common and instead of sharing more 294 * code, they reimplement those common algorithms independently. In this driver 295 * we try to separate the hardware-specific part from the (largely) generic 296 * part. This improves code readability and makes it possible in the future to 297 * reuse the generic code in form of a helper library. That generic code should 298 * be suitable for various DMA controllers, using transfer descriptors in RAM 299 * and pushing one SG list at a time to the DMA controller. 300 */ 301 302 /* Hardware-specific part */ 303 304 static inline u32 nbpf_chan_read(struct nbpf_channel *chan, 305 unsigned int offset) 306 { 307 u32 data = ioread32(chan->base + offset); 308 dev_dbg(chan->dma_chan.device->dev, "%s(0x%p + 0x%x) = 0x%x\n", 309 __func__, chan->base, offset, data); 310 return data; 311 } 312 313 static inline void nbpf_chan_write(struct nbpf_channel *chan, 314 unsigned int offset, u32 data) 315 { 316 iowrite32(data, chan->base + offset); 317 dev_dbg(chan->dma_chan.device->dev, "%s(0x%p + 0x%x) = 0x%x\n", 318 __func__, chan->base, offset, data); 319 } 320 321 static inline u32 nbpf_read(struct nbpf_device *nbpf, 322 unsigned int offset) 323 { 324 u32 data = ioread32(nbpf->base + offset); 325 dev_dbg(nbpf->dma_dev.dev, "%s(0x%p + 0x%x) = 0x%x\n", 326 __func__, nbpf->base, offset, data); 327 return data; 328 } 329 330 static inline void nbpf_write(struct nbpf_device *nbpf, 331 unsigned int offset, u32 data) 332 { 333 iowrite32(data, nbpf->base + offset); 334 dev_dbg(nbpf->dma_dev.dev, "%s(0x%p + 0x%x) = 0x%x\n", 335 __func__, nbpf->base, offset, data); 336 } 337 338 static void nbpf_chan_halt(struct nbpf_channel *chan) 339 { 340 nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREN); 341 } 342 343 static bool nbpf_status_get(struct nbpf_channel *chan) 344 { 345 u32 status = nbpf_read(chan->nbpf, NBPF_DSTAT_END); 346 347 return status & BIT(chan - chan->nbpf->chan); 348 } 349 350 static void nbpf_status_ack(struct nbpf_channel *chan) 351 { 352 nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREND); 353 } 354 355 static u32 nbpf_error_get(struct nbpf_device *nbpf) 356 { 357 return nbpf_read(nbpf, NBPF_DSTAT_ER); 358 } 359 360 static struct nbpf_channel *nbpf_error_get_channel(struct nbpf_device *nbpf, u32 error) 361 { 362 return nbpf->chan + __ffs(error); 363 } 364 365 static void nbpf_error_clear(struct nbpf_channel *chan) 366 { 367 u32 status; 368 int i; 369 370 /* Stop the channel, make sure DMA has been aborted */ 371 nbpf_chan_halt(chan); 372 373 for (i = 1000; i; i--) { 374 status = nbpf_chan_read(chan, NBPF_CHAN_STAT); 375 if (!(status & NBPF_CHAN_STAT_TACT)) 376 break; 377 cpu_relax(); 378 } 379 380 if (!i) 381 dev_err(chan->dma_chan.device->dev, 382 "%s(): abort timeout, channel status 0x%x\n", __func__, status); 383 384 nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SWRST); 385 } 386 387 static int nbpf_start(struct nbpf_desc *desc) 388 { 389 struct nbpf_channel *chan = desc->chan; 390 struct nbpf_link_desc *ldesc = list_first_entry(&desc->sg, struct nbpf_link_desc, node); 391 392 nbpf_chan_write(chan, NBPF_CHAN_NXLA, (u32)ldesc->hwdesc_dma_addr); 393 nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SETEN | NBPF_CHAN_CTRL_CLRSUS); 394 chan->paused = false; 395 396 /* Software trigger MEMCPY - only MEMCPY uses the block mode */ 397 if (ldesc->hwdesc->config & NBPF_CHAN_CFG_TM) 398 nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_STG); 399 400 dev_dbg(chan->nbpf->dma_dev.dev, "%s(): next 0x%x, cur 0x%x\n", __func__, 401 nbpf_chan_read(chan, NBPF_CHAN_NXLA), nbpf_chan_read(chan, NBPF_CHAN_CRLA)); 402 403 return 0; 404 } 405 406 static void nbpf_chan_prepare(struct nbpf_channel *chan) 407 { 408 chan->dmarq_cfg = (chan->flags & NBPF_SLAVE_RQ_HIGH ? NBPF_CHAN_CFG_HIEN : 0) | 409 (chan->flags & NBPF_SLAVE_RQ_LOW ? NBPF_CHAN_CFG_LOEN : 0) | 410 (chan->flags & NBPF_SLAVE_RQ_LEVEL ? 411 NBPF_CHAN_CFG_LVL | (NBPF_CHAN_CFG_AM & 0x200) : 0) | 412 chan->terminal; 413 } 414 415 static void nbpf_chan_prepare_default(struct nbpf_channel *chan) 416 { 417 /* Don't output DMAACK */ 418 chan->dmarq_cfg = NBPF_CHAN_CFG_AM & 0x400; 419 chan->terminal = 0; 420 chan->flags = 0; 421 } 422 423 static void nbpf_chan_configure(struct nbpf_channel *chan) 424 { 425 /* 426 * We assume, that only the link mode and DMA request line configuration 427 * have to be set in the configuration register manually. Dynamic 428 * per-transfer configuration will be loaded from transfer descriptors. 429 */ 430 nbpf_chan_write(chan, NBPF_CHAN_CFG, NBPF_CHAN_CFG_DMS | chan->dmarq_cfg); 431 } 432 433 static u32 nbpf_xfer_ds(struct nbpf_device *nbpf, size_t size, 434 enum dma_transfer_direction direction) 435 { 436 int max_burst = nbpf->config->buffer_size * 8; 437 438 if (nbpf->max_burst_mem_read || nbpf->max_burst_mem_write) { 439 switch (direction) { 440 case DMA_MEM_TO_MEM: 441 max_burst = min_not_zero(nbpf->max_burst_mem_read, 442 nbpf->max_burst_mem_write); 443 break; 444 case DMA_MEM_TO_DEV: 445 if (nbpf->max_burst_mem_read) 446 max_burst = nbpf->max_burst_mem_read; 447 break; 448 case DMA_DEV_TO_MEM: 449 if (nbpf->max_burst_mem_write) 450 max_burst = nbpf->max_burst_mem_write; 451 break; 452 case DMA_DEV_TO_DEV: 453 default: 454 break; 455 } 456 } 457 458 /* Maximum supported bursts depend on the buffer size */ 459 return min_t(int, __ffs(size), ilog2(max_burst)); 460 } 461 462 static size_t nbpf_xfer_size(struct nbpf_device *nbpf, 463 enum dma_slave_buswidth width, u32 burst) 464 { 465 size_t size; 466 467 if (!burst) 468 burst = 1; 469 470 switch (width) { 471 case DMA_SLAVE_BUSWIDTH_8_BYTES: 472 size = 8 * burst; 473 break; 474 475 case DMA_SLAVE_BUSWIDTH_4_BYTES: 476 size = 4 * burst; 477 break; 478 479 case DMA_SLAVE_BUSWIDTH_2_BYTES: 480 size = 2 * burst; 481 break; 482 483 default: 484 pr_warn("%s(): invalid bus width %u\n", __func__, width); 485 fallthrough; 486 case DMA_SLAVE_BUSWIDTH_1_BYTE: 487 size = burst; 488 } 489 490 return nbpf_xfer_ds(nbpf, size, DMA_TRANS_NONE); 491 } 492 493 /* 494 * We need a way to recognise slaves, whose data is sent "raw" over the bus, 495 * i.e. it isn't known in advance how many bytes will be received. Therefore 496 * the slave driver has to provide a "large enough" buffer and either read the 497 * buffer, when it is full, or detect, that some data has arrived, then wait for 498 * a timeout, if no more data arrives - receive what's already there. We want to 499 * handle such slaves in a special way to allow an optimised mode for other 500 * users, for whom the amount of data is known in advance. So far there's no way 501 * to recognise such slaves. We use a data-width check to distinguish between 502 * the SD host and the PL011 UART. 503 */ 504 505 static int nbpf_prep_one(struct nbpf_link_desc *ldesc, 506 enum dma_transfer_direction direction, 507 dma_addr_t src, dma_addr_t dst, size_t size, bool last) 508 { 509 struct nbpf_link_reg *hwdesc = ldesc->hwdesc; 510 struct nbpf_desc *desc = ldesc->desc; 511 struct nbpf_channel *chan = desc->chan; 512 struct device *dev = chan->dma_chan.device->dev; 513 size_t mem_xfer, slave_xfer; 514 bool can_burst; 515 516 hwdesc->header = NBPF_HEADER_WBD | NBPF_HEADER_LV | 517 (last ? NBPF_HEADER_LE : 0); 518 519 hwdesc->src_addr = src; 520 hwdesc->dst_addr = dst; 521 hwdesc->transaction_size = size; 522 523 /* 524 * set config: SAD, DAD, DDS, SDS, etc. 525 * Note on transfer sizes: the DMAC can perform unaligned DMA transfers, 526 * but it is important to have transaction size a multiple of both 527 * receiver and transmitter transfer sizes. It is also possible to use 528 * different RAM and device transfer sizes, and it does work well with 529 * some devices, e.g. with V08R07S01E SD host controllers, which can use 530 * 128 byte transfers. But this doesn't work with other devices, 531 * especially when the transaction size is unknown. This is the case, 532 * e.g. with serial drivers like amba-pl011.c. For reception it sets up 533 * the transaction size of 4K and if fewer bytes are received, it 534 * pauses DMA and reads out data received via DMA as well as those left 535 * in the Rx FIFO. For this to work with the RAM side using burst 536 * transfers we enable the SBE bit and terminate the transfer in our 537 * .device_pause handler. 538 */ 539 mem_xfer = nbpf_xfer_ds(chan->nbpf, size, direction); 540 541 switch (direction) { 542 case DMA_DEV_TO_MEM: 543 can_burst = chan->slave_src_width >= 3; 544 slave_xfer = min(mem_xfer, can_burst ? 545 chan->slave_src_burst : chan->slave_src_width); 546 /* 547 * Is the slave narrower than 64 bits, i.e. isn't using the full 548 * bus width and cannot use bursts? 549 */ 550 if (mem_xfer > chan->slave_src_burst && !can_burst) 551 mem_xfer = chan->slave_src_burst; 552 /* Device-to-RAM DMA is unreliable without REQD set */ 553 hwdesc->config = NBPF_CHAN_CFG_SAD | (NBPF_CHAN_CFG_DDS & (mem_xfer << 16)) | 554 (NBPF_CHAN_CFG_SDS & (slave_xfer << 12)) | NBPF_CHAN_CFG_REQD | 555 NBPF_CHAN_CFG_SBE; 556 break; 557 558 case DMA_MEM_TO_DEV: 559 slave_xfer = min(mem_xfer, chan->slave_dst_width >= 3 ? 560 chan->slave_dst_burst : chan->slave_dst_width); 561 hwdesc->config = NBPF_CHAN_CFG_DAD | (NBPF_CHAN_CFG_SDS & (mem_xfer << 12)) | 562 (NBPF_CHAN_CFG_DDS & (slave_xfer << 16)) | NBPF_CHAN_CFG_REQD; 563 break; 564 565 case DMA_MEM_TO_MEM: 566 hwdesc->config = NBPF_CHAN_CFG_TCM | NBPF_CHAN_CFG_TM | 567 (NBPF_CHAN_CFG_SDS & (mem_xfer << 12)) | 568 (NBPF_CHAN_CFG_DDS & (mem_xfer << 16)); 569 break; 570 571 default: 572 return -EINVAL; 573 } 574 575 hwdesc->config |= chan->dmarq_cfg | (last ? 0 : NBPF_CHAN_CFG_DEM) | 576 NBPF_CHAN_CFG_DMS; 577 578 dev_dbg(dev, "%s(): desc @ %pad: hdr 0x%x, cfg 0x%x, %zu @ %pad -> %pad\n", 579 __func__, &ldesc->hwdesc_dma_addr, hwdesc->header, 580 hwdesc->config, size, &src, &dst); 581 582 dma_sync_single_for_device(dev, ldesc->hwdesc_dma_addr, sizeof(*hwdesc), 583 DMA_TO_DEVICE); 584 585 return 0; 586 } 587 588 static size_t nbpf_bytes_left(struct nbpf_channel *chan) 589 { 590 return nbpf_chan_read(chan, NBPF_CHAN_CUR_TR_BYTE); 591 } 592 593 static void nbpf_configure(struct nbpf_device *nbpf) 594 { 595 nbpf_write(nbpf, NBPF_CTRL, NBPF_CTRL_LVINT); 596 } 597 598 /* Generic part */ 599 600 /* DMA ENGINE functions */ 601 static void nbpf_issue_pending(struct dma_chan *dchan) 602 { 603 struct nbpf_channel *chan = nbpf_to_chan(dchan); 604 unsigned long flags; 605 606 dev_dbg(dchan->device->dev, "Entry %s()\n", __func__); 607 608 spin_lock_irqsave(&chan->lock, flags); 609 if (list_empty(&chan->queued)) 610 goto unlock; 611 612 list_splice_tail_init(&chan->queued, &chan->active); 613 614 if (!chan->running) { 615 struct nbpf_desc *desc = list_first_entry(&chan->active, 616 struct nbpf_desc, node); 617 if (!nbpf_start(desc)) 618 chan->running = desc; 619 } 620 621 unlock: 622 spin_unlock_irqrestore(&chan->lock, flags); 623 } 624 625 static enum dma_status nbpf_tx_status(struct dma_chan *dchan, 626 dma_cookie_t cookie, struct dma_tx_state *state) 627 { 628 struct nbpf_channel *chan = nbpf_to_chan(dchan); 629 enum dma_status status = dma_cookie_status(dchan, cookie, state); 630 631 if (state) { 632 dma_cookie_t running; 633 unsigned long flags; 634 635 spin_lock_irqsave(&chan->lock, flags); 636 running = chan->running ? chan->running->async_tx.cookie : -EINVAL; 637 638 if (cookie == running) { 639 state->residue = nbpf_bytes_left(chan); 640 dev_dbg(dchan->device->dev, "%s(): residue %u\n", __func__, 641 state->residue); 642 } else if (status == DMA_IN_PROGRESS) { 643 struct nbpf_desc *desc; 644 bool found = false; 645 646 list_for_each_entry(desc, &chan->active, node) 647 if (desc->async_tx.cookie == cookie) { 648 found = true; 649 break; 650 } 651 652 if (!found) 653 list_for_each_entry(desc, &chan->queued, node) 654 if (desc->async_tx.cookie == cookie) { 655 found = true; 656 break; 657 658 } 659 660 state->residue = found ? desc->length : 0; 661 } 662 663 spin_unlock_irqrestore(&chan->lock, flags); 664 } 665 666 if (chan->paused) 667 status = DMA_PAUSED; 668 669 return status; 670 } 671 672 static dma_cookie_t nbpf_tx_submit(struct dma_async_tx_descriptor *tx) 673 { 674 struct nbpf_desc *desc = container_of(tx, struct nbpf_desc, async_tx); 675 struct nbpf_channel *chan = desc->chan; 676 unsigned long flags; 677 dma_cookie_t cookie; 678 679 spin_lock_irqsave(&chan->lock, flags); 680 cookie = dma_cookie_assign(tx); 681 list_add_tail(&desc->node, &chan->queued); 682 spin_unlock_irqrestore(&chan->lock, flags); 683 684 dev_dbg(chan->dma_chan.device->dev, "Entry %s(%d)\n", __func__, cookie); 685 686 return cookie; 687 } 688 689 static int nbpf_desc_page_alloc(struct nbpf_channel *chan) 690 { 691 struct dma_chan *dchan = &chan->dma_chan; 692 struct nbpf_desc_page *dpage = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); 693 struct nbpf_link_desc *ldesc; 694 struct nbpf_link_reg *hwdesc; 695 struct nbpf_desc *desc; 696 LIST_HEAD(head); 697 LIST_HEAD(lhead); 698 int i; 699 struct device *dev = dchan->device->dev; 700 701 if (!dpage) 702 return -ENOMEM; 703 704 dev_dbg(dev, "%s(): alloc %lu descriptors, %lu segments, total alloc %zu\n", 705 __func__, NBPF_DESCS_PER_PAGE, NBPF_SEGMENTS_PER_PAGE, sizeof(*dpage)); 706 707 for (i = 0, ldesc = dpage->ldesc, hwdesc = dpage->hwdesc; 708 i < ARRAY_SIZE(dpage->ldesc); 709 i++, ldesc++, hwdesc++) { 710 ldesc->hwdesc = hwdesc; 711 list_add_tail(&ldesc->node, &lhead); 712 ldesc->hwdesc_dma_addr = dma_map_single(dchan->device->dev, 713 hwdesc, sizeof(*hwdesc), DMA_TO_DEVICE); 714 715 dev_dbg(dev, "%s(): mapped 0x%p to %pad\n", __func__, 716 hwdesc, &ldesc->hwdesc_dma_addr); 717 } 718 719 for (i = 0, desc = dpage->desc; 720 i < ARRAY_SIZE(dpage->desc); 721 i++, desc++) { 722 dma_async_tx_descriptor_init(&desc->async_tx, dchan); 723 desc->async_tx.tx_submit = nbpf_tx_submit; 724 desc->chan = chan; 725 INIT_LIST_HEAD(&desc->sg); 726 list_add_tail(&desc->node, &head); 727 } 728 729 /* 730 * This function cannot be called from interrupt context, so, no need to 731 * save flags 732 */ 733 spin_lock_irq(&chan->lock); 734 list_splice_tail(&lhead, &chan->free_links); 735 list_splice_tail(&head, &chan->free); 736 list_add(&dpage->node, &chan->desc_page); 737 spin_unlock_irq(&chan->lock); 738 739 return ARRAY_SIZE(dpage->desc); 740 } 741 742 static void nbpf_desc_put(struct nbpf_desc *desc) 743 { 744 struct nbpf_channel *chan = desc->chan; 745 struct nbpf_link_desc *ldesc, *tmp; 746 unsigned long flags; 747 748 spin_lock_irqsave(&chan->lock, flags); 749 list_for_each_entry_safe(ldesc, tmp, &desc->sg, node) 750 list_move(&ldesc->node, &chan->free_links); 751 752 list_add(&desc->node, &chan->free); 753 spin_unlock_irqrestore(&chan->lock, flags); 754 } 755 756 static void nbpf_scan_acked(struct nbpf_channel *chan) 757 { 758 struct nbpf_desc *desc, *tmp; 759 unsigned long flags; 760 LIST_HEAD(head); 761 762 spin_lock_irqsave(&chan->lock, flags); 763 list_for_each_entry_safe(desc, tmp, &chan->done, node) 764 if (async_tx_test_ack(&desc->async_tx) && desc->user_wait) { 765 list_move(&desc->node, &head); 766 desc->user_wait = false; 767 } 768 spin_unlock_irqrestore(&chan->lock, flags); 769 770 list_for_each_entry_safe(desc, tmp, &head, node) { 771 list_del(&desc->node); 772 nbpf_desc_put(desc); 773 } 774 } 775 776 /* 777 * We have to allocate descriptors with the channel lock dropped. This means, 778 * before we re-acquire the lock buffers can be taken already, so we have to 779 * re-check after re-acquiring the lock and possibly retry, if buffers are gone 780 * again. 781 */ 782 static struct nbpf_desc *nbpf_desc_get(struct nbpf_channel *chan, size_t len) 783 { 784 struct nbpf_desc *desc = NULL; 785 struct nbpf_link_desc *ldesc, *prev = NULL; 786 787 nbpf_scan_acked(chan); 788 789 spin_lock_irq(&chan->lock); 790 791 do { 792 int i = 0, ret; 793 794 if (list_empty(&chan->free)) { 795 /* No more free descriptors */ 796 spin_unlock_irq(&chan->lock); 797 ret = nbpf_desc_page_alloc(chan); 798 if (ret < 0) 799 return NULL; 800 spin_lock_irq(&chan->lock); 801 continue; 802 } 803 desc = list_first_entry(&chan->free, struct nbpf_desc, node); 804 list_del(&desc->node); 805 806 do { 807 if (list_empty(&chan->free_links)) { 808 /* No more free link descriptors */ 809 spin_unlock_irq(&chan->lock); 810 ret = nbpf_desc_page_alloc(chan); 811 if (ret < 0) { 812 nbpf_desc_put(desc); 813 return NULL; 814 } 815 spin_lock_irq(&chan->lock); 816 continue; 817 } 818 819 ldesc = list_first_entry(&chan->free_links, 820 struct nbpf_link_desc, node); 821 ldesc->desc = desc; 822 if (prev) 823 prev->hwdesc->next = (u32)ldesc->hwdesc_dma_addr; 824 825 prev = ldesc; 826 list_move_tail(&ldesc->node, &desc->sg); 827 828 i++; 829 } while (i < len); 830 } while (!desc); 831 832 prev->hwdesc->next = 0; 833 834 spin_unlock_irq(&chan->lock); 835 836 return desc; 837 } 838 839 static void nbpf_chan_idle(struct nbpf_channel *chan) 840 { 841 struct nbpf_desc *desc, *tmp; 842 unsigned long flags; 843 LIST_HEAD(head); 844 845 spin_lock_irqsave(&chan->lock, flags); 846 847 list_splice_init(&chan->done, &head); 848 list_splice_init(&chan->active, &head); 849 list_splice_init(&chan->queued, &head); 850 851 chan->running = NULL; 852 853 spin_unlock_irqrestore(&chan->lock, flags); 854 855 list_for_each_entry_safe(desc, tmp, &head, node) { 856 dev_dbg(chan->nbpf->dma_dev.dev, "%s(): force-free desc %p cookie %d\n", 857 __func__, desc, desc->async_tx.cookie); 858 list_del(&desc->node); 859 nbpf_desc_put(desc); 860 } 861 } 862 863 static int nbpf_pause(struct dma_chan *dchan) 864 { 865 struct nbpf_channel *chan = nbpf_to_chan(dchan); 866 867 dev_dbg(dchan->device->dev, "Entry %s\n", __func__); 868 869 chan->paused = true; 870 nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SETSUS); 871 /* See comment in nbpf_prep_one() */ 872 nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREN); 873 874 return 0; 875 } 876 877 static int nbpf_terminate_all(struct dma_chan *dchan) 878 { 879 struct nbpf_channel *chan = nbpf_to_chan(dchan); 880 881 dev_dbg(dchan->device->dev, "Entry %s\n", __func__); 882 dev_dbg(dchan->device->dev, "Terminating\n"); 883 884 nbpf_chan_halt(chan); 885 nbpf_chan_idle(chan); 886 887 return 0; 888 } 889 890 static int nbpf_config(struct dma_chan *dchan, 891 struct dma_slave_config *config) 892 { 893 struct nbpf_channel *chan = nbpf_to_chan(dchan); 894 895 dev_dbg(dchan->device->dev, "Entry %s\n", __func__); 896 897 /* 898 * We could check config->slave_id to match chan->terminal here, 899 * but with DT they would be coming from the same source, so 900 * such a check would be superfluous 901 */ 902 903 chan->slave_dst_addr = config->dst_addr; 904 chan->slave_dst_width = nbpf_xfer_size(chan->nbpf, 905 config->dst_addr_width, 1); 906 chan->slave_dst_burst = nbpf_xfer_size(chan->nbpf, 907 config->dst_addr_width, 908 config->dst_maxburst); 909 chan->slave_src_addr = config->src_addr; 910 chan->slave_src_width = nbpf_xfer_size(chan->nbpf, 911 config->src_addr_width, 1); 912 chan->slave_src_burst = nbpf_xfer_size(chan->nbpf, 913 config->src_addr_width, 914 config->src_maxburst); 915 916 return 0; 917 } 918 919 static struct dma_async_tx_descriptor *nbpf_prep_sg(struct nbpf_channel *chan, 920 struct scatterlist *src_sg, struct scatterlist *dst_sg, 921 size_t len, enum dma_transfer_direction direction, 922 unsigned long flags) 923 { 924 struct nbpf_link_desc *ldesc; 925 struct scatterlist *mem_sg; 926 struct nbpf_desc *desc; 927 bool inc_src, inc_dst; 928 size_t data_len = 0; 929 int i = 0; 930 931 switch (direction) { 932 case DMA_DEV_TO_MEM: 933 mem_sg = dst_sg; 934 inc_src = false; 935 inc_dst = true; 936 break; 937 938 case DMA_MEM_TO_DEV: 939 mem_sg = src_sg; 940 inc_src = true; 941 inc_dst = false; 942 break; 943 944 default: 945 case DMA_MEM_TO_MEM: 946 mem_sg = src_sg; 947 inc_src = true; 948 inc_dst = true; 949 } 950 951 desc = nbpf_desc_get(chan, len); 952 if (!desc) 953 return NULL; 954 955 desc->async_tx.flags = flags; 956 desc->async_tx.cookie = -EBUSY; 957 desc->user_wait = false; 958 959 /* 960 * This is a private descriptor list, and we own the descriptor. No need 961 * to lock. 962 */ 963 list_for_each_entry(ldesc, &desc->sg, node) { 964 int ret = nbpf_prep_one(ldesc, direction, 965 sg_dma_address(src_sg), 966 sg_dma_address(dst_sg), 967 sg_dma_len(mem_sg), 968 i == len - 1); 969 if (ret < 0) { 970 nbpf_desc_put(desc); 971 return NULL; 972 } 973 data_len += sg_dma_len(mem_sg); 974 if (inc_src) 975 src_sg = sg_next(src_sg); 976 if (inc_dst) 977 dst_sg = sg_next(dst_sg); 978 mem_sg = direction == DMA_DEV_TO_MEM ? dst_sg : src_sg; 979 i++; 980 } 981 982 desc->length = data_len; 983 984 /* The user has to return the descriptor to us ASAP via .tx_submit() */ 985 return &desc->async_tx; 986 } 987 988 static struct dma_async_tx_descriptor *nbpf_prep_memcpy( 989 struct dma_chan *dchan, dma_addr_t dst, dma_addr_t src, 990 size_t len, unsigned long flags) 991 { 992 struct nbpf_channel *chan = nbpf_to_chan(dchan); 993 struct scatterlist dst_sg; 994 struct scatterlist src_sg; 995 996 sg_init_table(&dst_sg, 1); 997 sg_init_table(&src_sg, 1); 998 999 sg_dma_address(&dst_sg) = dst; 1000 sg_dma_address(&src_sg) = src; 1001 1002 sg_dma_len(&dst_sg) = len; 1003 sg_dma_len(&src_sg) = len; 1004 1005 dev_dbg(dchan->device->dev, "%s(): %zu @ %pad -> %pad\n", 1006 __func__, len, &src, &dst); 1007 1008 return nbpf_prep_sg(chan, &src_sg, &dst_sg, 1, 1009 DMA_MEM_TO_MEM, flags); 1010 } 1011 1012 static struct dma_async_tx_descriptor *nbpf_prep_slave_sg( 1013 struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len, 1014 enum dma_transfer_direction direction, unsigned long flags, void *context) 1015 { 1016 struct nbpf_channel *chan = nbpf_to_chan(dchan); 1017 struct scatterlist slave_sg; 1018 1019 dev_dbg(dchan->device->dev, "Entry %s()\n", __func__); 1020 1021 sg_init_table(&slave_sg, 1); 1022 1023 switch (direction) { 1024 case DMA_MEM_TO_DEV: 1025 sg_dma_address(&slave_sg) = chan->slave_dst_addr; 1026 return nbpf_prep_sg(chan, sgl, &slave_sg, sg_len, 1027 direction, flags); 1028 1029 case DMA_DEV_TO_MEM: 1030 sg_dma_address(&slave_sg) = chan->slave_src_addr; 1031 return nbpf_prep_sg(chan, &slave_sg, sgl, sg_len, 1032 direction, flags); 1033 1034 default: 1035 return NULL; 1036 } 1037 } 1038 1039 static int nbpf_alloc_chan_resources(struct dma_chan *dchan) 1040 { 1041 struct nbpf_channel *chan = nbpf_to_chan(dchan); 1042 int ret; 1043 1044 INIT_LIST_HEAD(&chan->free); 1045 INIT_LIST_HEAD(&chan->free_links); 1046 INIT_LIST_HEAD(&chan->queued); 1047 INIT_LIST_HEAD(&chan->active); 1048 INIT_LIST_HEAD(&chan->done); 1049 1050 ret = nbpf_desc_page_alloc(chan); 1051 if (ret < 0) 1052 return ret; 1053 1054 dev_dbg(dchan->device->dev, "Entry %s(): terminal %u\n", __func__, 1055 chan->terminal); 1056 1057 nbpf_chan_configure(chan); 1058 1059 return ret; 1060 } 1061 1062 static void nbpf_free_chan_resources(struct dma_chan *dchan) 1063 { 1064 struct nbpf_channel *chan = nbpf_to_chan(dchan); 1065 struct nbpf_desc_page *dpage, *tmp; 1066 1067 dev_dbg(dchan->device->dev, "Entry %s()\n", __func__); 1068 1069 nbpf_chan_halt(chan); 1070 nbpf_chan_idle(chan); 1071 /* Clean up for if a channel is re-used for MEMCPY after slave DMA */ 1072 nbpf_chan_prepare_default(chan); 1073 1074 list_for_each_entry_safe(dpage, tmp, &chan->desc_page, node) { 1075 struct nbpf_link_desc *ldesc; 1076 int i; 1077 list_del(&dpage->node); 1078 for (i = 0, ldesc = dpage->ldesc; 1079 i < ARRAY_SIZE(dpage->ldesc); 1080 i++, ldesc++) 1081 dma_unmap_single(dchan->device->dev, ldesc->hwdesc_dma_addr, 1082 sizeof(*ldesc->hwdesc), DMA_TO_DEVICE); 1083 free_page((unsigned long)dpage); 1084 } 1085 } 1086 1087 static struct dma_chan *nbpf_of_xlate(struct of_phandle_args *dma_spec, 1088 struct of_dma *ofdma) 1089 { 1090 struct nbpf_device *nbpf = ofdma->of_dma_data; 1091 struct dma_chan *dchan; 1092 struct nbpf_channel *chan; 1093 1094 if (dma_spec->args_count != 2) 1095 return NULL; 1096 1097 dchan = dma_get_any_slave_channel(&nbpf->dma_dev); 1098 if (!dchan) 1099 return NULL; 1100 1101 dev_dbg(dchan->device->dev, "Entry %s(%pOFn)\n", __func__, 1102 dma_spec->np); 1103 1104 chan = nbpf_to_chan(dchan); 1105 1106 chan->terminal = dma_spec->args[0]; 1107 chan->flags = dma_spec->args[1]; 1108 1109 nbpf_chan_prepare(chan); 1110 nbpf_chan_configure(chan); 1111 1112 return dchan; 1113 } 1114 1115 static void nbpf_chan_tasklet(struct tasklet_struct *t) 1116 { 1117 struct nbpf_channel *chan = from_tasklet(chan, t, tasklet); 1118 struct nbpf_desc *desc, *tmp; 1119 struct dmaengine_desc_callback cb; 1120 1121 while (!list_empty(&chan->done)) { 1122 bool found = false, must_put, recycling = false; 1123 1124 spin_lock_irq(&chan->lock); 1125 1126 list_for_each_entry_safe(desc, tmp, &chan->done, node) { 1127 if (!desc->user_wait) { 1128 /* Newly completed descriptor, have to process */ 1129 found = true; 1130 break; 1131 } else if (async_tx_test_ack(&desc->async_tx)) { 1132 /* 1133 * This descriptor was waiting for a user ACK, 1134 * it can be recycled now. 1135 */ 1136 list_del(&desc->node); 1137 spin_unlock_irq(&chan->lock); 1138 nbpf_desc_put(desc); 1139 recycling = true; 1140 break; 1141 } 1142 } 1143 1144 if (recycling) 1145 continue; 1146 1147 if (!found) { 1148 /* This can happen if TERMINATE_ALL has been called */ 1149 spin_unlock_irq(&chan->lock); 1150 break; 1151 } 1152 1153 dma_cookie_complete(&desc->async_tx); 1154 1155 /* 1156 * With released lock we cannot dereference desc, maybe it's 1157 * still on the "done" list 1158 */ 1159 if (async_tx_test_ack(&desc->async_tx)) { 1160 list_del(&desc->node); 1161 must_put = true; 1162 } else { 1163 desc->user_wait = true; 1164 must_put = false; 1165 } 1166 1167 dmaengine_desc_get_callback(&desc->async_tx, &cb); 1168 1169 /* ack and callback completed descriptor */ 1170 spin_unlock_irq(&chan->lock); 1171 1172 dmaengine_desc_callback_invoke(&cb, NULL); 1173 1174 if (must_put) 1175 nbpf_desc_put(desc); 1176 } 1177 } 1178 1179 static irqreturn_t nbpf_chan_irq(int irq, void *dev) 1180 { 1181 struct nbpf_channel *chan = dev; 1182 bool done = nbpf_status_get(chan); 1183 struct nbpf_desc *desc; 1184 irqreturn_t ret; 1185 bool bh = false; 1186 1187 if (!done) 1188 return IRQ_NONE; 1189 1190 nbpf_status_ack(chan); 1191 1192 dev_dbg(&chan->dma_chan.dev->device, "%s()\n", __func__); 1193 1194 spin_lock(&chan->lock); 1195 desc = chan->running; 1196 if (WARN_ON(!desc)) { 1197 ret = IRQ_NONE; 1198 goto unlock; 1199 } else { 1200 ret = IRQ_HANDLED; 1201 bh = true; 1202 } 1203 1204 list_move_tail(&desc->node, &chan->done); 1205 chan->running = NULL; 1206 1207 if (!list_empty(&chan->active)) { 1208 desc = list_first_entry(&chan->active, 1209 struct nbpf_desc, node); 1210 if (!nbpf_start(desc)) 1211 chan->running = desc; 1212 } 1213 1214 unlock: 1215 spin_unlock(&chan->lock); 1216 1217 if (bh) 1218 tasklet_schedule(&chan->tasklet); 1219 1220 return ret; 1221 } 1222 1223 static irqreturn_t nbpf_err_irq(int irq, void *dev) 1224 { 1225 struct nbpf_device *nbpf = dev; 1226 u32 error = nbpf_error_get(nbpf); 1227 1228 dev_warn(nbpf->dma_dev.dev, "DMA error IRQ %u\n", irq); 1229 1230 if (!error) 1231 return IRQ_NONE; 1232 1233 do { 1234 struct nbpf_channel *chan = nbpf_error_get_channel(nbpf, error); 1235 /* On error: abort all queued transfers, no callback */ 1236 nbpf_error_clear(chan); 1237 nbpf_chan_idle(chan); 1238 error = nbpf_error_get(nbpf); 1239 } while (error); 1240 1241 return IRQ_HANDLED; 1242 } 1243 1244 static int nbpf_chan_probe(struct nbpf_device *nbpf, int n) 1245 { 1246 struct dma_device *dma_dev = &nbpf->dma_dev; 1247 struct nbpf_channel *chan = nbpf->chan + n; 1248 int ret; 1249 1250 chan->nbpf = nbpf; 1251 chan->base = nbpf->base + NBPF_REG_CHAN_OFFSET + NBPF_REG_CHAN_SIZE * n; 1252 INIT_LIST_HEAD(&chan->desc_page); 1253 spin_lock_init(&chan->lock); 1254 chan->dma_chan.device = dma_dev; 1255 dma_cookie_init(&chan->dma_chan); 1256 nbpf_chan_prepare_default(chan); 1257 1258 dev_dbg(dma_dev->dev, "%s(): channel %d: -> %p\n", __func__, n, chan->base); 1259 1260 snprintf(chan->name, sizeof(chan->name), "nbpf %d", n); 1261 1262 tasklet_setup(&chan->tasklet, nbpf_chan_tasklet); 1263 ret = devm_request_irq(dma_dev->dev, chan->irq, 1264 nbpf_chan_irq, IRQF_SHARED, 1265 chan->name, chan); 1266 if (ret < 0) 1267 return ret; 1268 1269 /* Add the channel to DMA device channel list */ 1270 list_add_tail(&chan->dma_chan.device_node, 1271 &dma_dev->channels); 1272 1273 return 0; 1274 } 1275 1276 static const struct of_device_id nbpf_match[] = { 1277 {.compatible = "renesas,nbpfaxi64dmac1b4", .data = &nbpf_cfg[NBPF1B4]}, 1278 {.compatible = "renesas,nbpfaxi64dmac1b8", .data = &nbpf_cfg[NBPF1B8]}, 1279 {.compatible = "renesas,nbpfaxi64dmac1b16", .data = &nbpf_cfg[NBPF1B16]}, 1280 {.compatible = "renesas,nbpfaxi64dmac4b4", .data = &nbpf_cfg[NBPF4B4]}, 1281 {.compatible = "renesas,nbpfaxi64dmac4b8", .data = &nbpf_cfg[NBPF4B8]}, 1282 {.compatible = "renesas,nbpfaxi64dmac4b16", .data = &nbpf_cfg[NBPF4B16]}, 1283 {.compatible = "renesas,nbpfaxi64dmac8b4", .data = &nbpf_cfg[NBPF8B4]}, 1284 {.compatible = "renesas,nbpfaxi64dmac8b8", .data = &nbpf_cfg[NBPF8B8]}, 1285 {.compatible = "renesas,nbpfaxi64dmac8b16", .data = &nbpf_cfg[NBPF8B16]}, 1286 {} 1287 }; 1288 MODULE_DEVICE_TABLE(of, nbpf_match); 1289 1290 static int nbpf_probe(struct platform_device *pdev) 1291 { 1292 struct device *dev = &pdev->dev; 1293 struct device_node *np = dev->of_node; 1294 struct nbpf_device *nbpf; 1295 struct dma_device *dma_dev; 1296 const struct nbpf_config *cfg; 1297 int num_channels; 1298 int ret, irq, eirq, i; 1299 int irqbuf[9] /* maximum 8 channels + error IRQ */; 1300 unsigned int irqs = 0; 1301 1302 BUILD_BUG_ON(sizeof(struct nbpf_desc_page) > PAGE_SIZE); 1303 1304 /* DT only */ 1305 if (!np) 1306 return -ENODEV; 1307 1308 cfg = of_device_get_match_data(dev); 1309 num_channels = cfg->num_channels; 1310 1311 nbpf = devm_kzalloc(dev, struct_size(nbpf, chan, num_channels), 1312 GFP_KERNEL); 1313 if (!nbpf) 1314 return -ENOMEM; 1315 1316 dma_dev = &nbpf->dma_dev; 1317 dma_dev->dev = dev; 1318 1319 nbpf->base = devm_platform_ioremap_resource(pdev, 0); 1320 if (IS_ERR(nbpf->base)) 1321 return PTR_ERR(nbpf->base); 1322 1323 nbpf->clk = devm_clk_get(dev, NULL); 1324 if (IS_ERR(nbpf->clk)) 1325 return PTR_ERR(nbpf->clk); 1326 1327 of_property_read_u32(np, "max-burst-mem-read", 1328 &nbpf->max_burst_mem_read); 1329 of_property_read_u32(np, "max-burst-mem-write", 1330 &nbpf->max_burst_mem_write); 1331 1332 nbpf->config = cfg; 1333 1334 for (i = 0; irqs < ARRAY_SIZE(irqbuf); i++) { 1335 irq = platform_get_irq_optional(pdev, i); 1336 if (irq < 0 && irq != -ENXIO) 1337 return irq; 1338 if (irq > 0) 1339 irqbuf[irqs++] = irq; 1340 } 1341 1342 /* 1343 * 3 IRQ resource schemes are supported: 1344 * 1. 1 shared IRQ for error and all channels 1345 * 2. 2 IRQs: one for error and one shared for all channels 1346 * 3. 1 IRQ for error and an own IRQ for each channel 1347 */ 1348 if (irqs != 1 && irqs != 2 && irqs != num_channels + 1) 1349 return -ENXIO; 1350 1351 if (irqs == 1) { 1352 eirq = irqbuf[0]; 1353 1354 for (i = 0; i <= num_channels; i++) 1355 nbpf->chan[i].irq = irqbuf[0]; 1356 } else { 1357 eirq = platform_get_irq_byname(pdev, "error"); 1358 if (eirq < 0) 1359 return eirq; 1360 1361 if (irqs == num_channels + 1) { 1362 struct nbpf_channel *chan; 1363 1364 for (i = 0, chan = nbpf->chan; i <= num_channels; 1365 i++, chan++) { 1366 /* Skip the error IRQ */ 1367 if (irqbuf[i] == eirq) 1368 i++; 1369 chan->irq = irqbuf[i]; 1370 } 1371 1372 if (chan != nbpf->chan + num_channels) 1373 return -EINVAL; 1374 } else { 1375 /* 2 IRQs and more than one channel */ 1376 if (irqbuf[0] == eirq) 1377 irq = irqbuf[1]; 1378 else 1379 irq = irqbuf[0]; 1380 1381 for (i = 0; i <= num_channels; i++) 1382 nbpf->chan[i].irq = irq; 1383 } 1384 } 1385 1386 ret = devm_request_irq(dev, eirq, nbpf_err_irq, 1387 IRQF_SHARED, "dma error", nbpf); 1388 if (ret < 0) 1389 return ret; 1390 nbpf->eirq = eirq; 1391 1392 INIT_LIST_HEAD(&dma_dev->channels); 1393 1394 /* Create DMA Channel */ 1395 for (i = 0; i < num_channels; i++) { 1396 ret = nbpf_chan_probe(nbpf, i); 1397 if (ret < 0) 1398 return ret; 1399 } 1400 1401 dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask); 1402 dma_cap_set(DMA_SLAVE, dma_dev->cap_mask); 1403 dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask); 1404 1405 /* Common and MEMCPY operations */ 1406 dma_dev->device_alloc_chan_resources 1407 = nbpf_alloc_chan_resources; 1408 dma_dev->device_free_chan_resources = nbpf_free_chan_resources; 1409 dma_dev->device_prep_dma_memcpy = nbpf_prep_memcpy; 1410 dma_dev->device_tx_status = nbpf_tx_status; 1411 dma_dev->device_issue_pending = nbpf_issue_pending; 1412 1413 /* 1414 * If we drop support for unaligned MEMCPY buffer addresses and / or 1415 * lengths by setting 1416 * dma_dev->copy_align = 4; 1417 * then we can set transfer length to 4 bytes in nbpf_prep_one() for 1418 * DMA_MEM_TO_MEM 1419 */ 1420 1421 /* Compulsory for DMA_SLAVE fields */ 1422 dma_dev->device_prep_slave_sg = nbpf_prep_slave_sg; 1423 dma_dev->device_config = nbpf_config; 1424 dma_dev->device_pause = nbpf_pause; 1425 dma_dev->device_terminate_all = nbpf_terminate_all; 1426 1427 dma_dev->src_addr_widths = NBPF_DMA_BUSWIDTHS; 1428 dma_dev->dst_addr_widths = NBPF_DMA_BUSWIDTHS; 1429 dma_dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); 1430 1431 platform_set_drvdata(pdev, nbpf); 1432 1433 ret = clk_prepare_enable(nbpf->clk); 1434 if (ret < 0) 1435 return ret; 1436 1437 nbpf_configure(nbpf); 1438 1439 ret = dma_async_device_register(dma_dev); 1440 if (ret < 0) 1441 goto e_clk_off; 1442 1443 ret = of_dma_controller_register(np, nbpf_of_xlate, nbpf); 1444 if (ret < 0) 1445 goto e_dma_dev_unreg; 1446 1447 return 0; 1448 1449 e_dma_dev_unreg: 1450 dma_async_device_unregister(dma_dev); 1451 e_clk_off: 1452 clk_disable_unprepare(nbpf->clk); 1453 1454 return ret; 1455 } 1456 1457 static void nbpf_remove(struct platform_device *pdev) 1458 { 1459 struct nbpf_device *nbpf = platform_get_drvdata(pdev); 1460 int i; 1461 1462 devm_free_irq(&pdev->dev, nbpf->eirq, nbpf); 1463 1464 for (i = 0; i < nbpf->config->num_channels; i++) { 1465 struct nbpf_channel *chan = nbpf->chan + i; 1466 1467 devm_free_irq(&pdev->dev, chan->irq, chan); 1468 1469 tasklet_kill(&chan->tasklet); 1470 } 1471 1472 of_dma_controller_free(pdev->dev.of_node); 1473 dma_async_device_unregister(&nbpf->dma_dev); 1474 clk_disable_unprepare(nbpf->clk); 1475 } 1476 1477 static const struct platform_device_id nbpf_ids[] = { 1478 {"nbpfaxi64dmac1b4", (kernel_ulong_t)&nbpf_cfg[NBPF1B4]}, 1479 {"nbpfaxi64dmac1b8", (kernel_ulong_t)&nbpf_cfg[NBPF1B8]}, 1480 {"nbpfaxi64dmac1b16", (kernel_ulong_t)&nbpf_cfg[NBPF1B16]}, 1481 {"nbpfaxi64dmac4b4", (kernel_ulong_t)&nbpf_cfg[NBPF4B4]}, 1482 {"nbpfaxi64dmac4b8", (kernel_ulong_t)&nbpf_cfg[NBPF4B8]}, 1483 {"nbpfaxi64dmac4b16", (kernel_ulong_t)&nbpf_cfg[NBPF4B16]}, 1484 {"nbpfaxi64dmac8b4", (kernel_ulong_t)&nbpf_cfg[NBPF8B4]}, 1485 {"nbpfaxi64dmac8b8", (kernel_ulong_t)&nbpf_cfg[NBPF8B8]}, 1486 {"nbpfaxi64dmac8b16", (kernel_ulong_t)&nbpf_cfg[NBPF8B16]}, 1487 {}, 1488 }; 1489 MODULE_DEVICE_TABLE(platform, nbpf_ids); 1490 1491 #ifdef CONFIG_PM 1492 static int nbpf_runtime_suspend(struct device *dev) 1493 { 1494 struct nbpf_device *nbpf = dev_get_drvdata(dev); 1495 clk_disable_unprepare(nbpf->clk); 1496 return 0; 1497 } 1498 1499 static int nbpf_runtime_resume(struct device *dev) 1500 { 1501 struct nbpf_device *nbpf = dev_get_drvdata(dev); 1502 return clk_prepare_enable(nbpf->clk); 1503 } 1504 #endif 1505 1506 static const struct dev_pm_ops nbpf_pm_ops = { 1507 SET_RUNTIME_PM_OPS(nbpf_runtime_suspend, nbpf_runtime_resume, NULL) 1508 }; 1509 1510 static struct platform_driver nbpf_driver = { 1511 .driver = { 1512 .name = "dma-nbpf", 1513 .of_match_table = nbpf_match, 1514 .pm = &nbpf_pm_ops, 1515 }, 1516 .id_table = nbpf_ids, 1517 .probe = nbpf_probe, 1518 .remove_new = nbpf_remove, 1519 }; 1520 1521 module_platform_driver(nbpf_driver); 1522 1523 MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); 1524 MODULE_DESCRIPTION("dmaengine driver for NBPFAXI64* DMACs"); 1525 MODULE_LICENSE("GPL v2"); 1526