xref: /linux/drivers/crypto/intel/qat/qat_dh895xcc/adf_drv.c (revision 870b7fdc660b38c4e1bd8bf48e62aa352ddf8f42)
1 // SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0-only)
2 /* Copyright(c) 2014 - 2020 Intel Corporation */
3 #include <linux/kernel.h>
4 #include <linux/module.h>
5 #include <linux/pci.h>
6 #include <linux/init.h>
7 #include <linux/types.h>
8 #include <linux/fs.h>
9 #include <linux/slab.h>
10 #include <linux/errno.h>
11 #include <linux/device.h>
12 #include <linux/dma-mapping.h>
13 #include <linux/platform_device.h>
14 #include <linux/workqueue.h>
15 #include <linux/io.h>
16 #include <adf_accel_devices.h>
17 #include <adf_common_drv.h>
18 #include <adf_cfg.h>
19 #include <adf_dbgfs.h>
20 #include "adf_dh895xcc_hw_data.h"
21 
22 static const struct pci_device_id adf_pci_tbl[] = {
23 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_QAT_DH895XCC), },
24 	{ }
25 };
26 MODULE_DEVICE_TABLE(pci, adf_pci_tbl);
27 
28 static int adf_probe(struct pci_dev *dev, const struct pci_device_id *ent);
29 static void adf_remove(struct pci_dev *dev);
30 
31 static struct pci_driver adf_driver = {
32 	.id_table = adf_pci_tbl,
33 	.name = ADF_DH895XCC_DEVICE_NAME,
34 	.probe = adf_probe,
35 	.remove = adf_remove,
36 	.sriov_configure = adf_sriov_configure,
37 	.err_handler = &adf_err_handler,
38 };
39 
40 static void adf_cleanup_pci_dev(struct adf_accel_dev *accel_dev)
41 {
42 	pci_release_regions(accel_dev->accel_pci_dev.pci_dev);
43 	pci_disable_device(accel_dev->accel_pci_dev.pci_dev);
44 }
45 
46 static void adf_cleanup_accel(struct adf_accel_dev *accel_dev)
47 {
48 	struct adf_accel_pci *accel_pci_dev = &accel_dev->accel_pci_dev;
49 	int i;
50 
51 	for (i = 0; i < ADF_PCI_MAX_BARS; i++) {
52 		struct adf_bar *bar = &accel_pci_dev->pci_bars[i];
53 
54 		if (bar->virt_addr)
55 			pci_iounmap(accel_pci_dev->pci_dev, bar->virt_addr);
56 	}
57 
58 	if (accel_dev->hw_device) {
59 		switch (accel_pci_dev->pci_dev->device) {
60 		case PCI_DEVICE_ID_INTEL_QAT_DH895XCC:
61 			adf_clean_hw_data_dh895xcc(accel_dev->hw_device);
62 			break;
63 		default:
64 			break;
65 		}
66 		kfree(accel_dev->hw_device);
67 		accel_dev->hw_device = NULL;
68 	}
69 	adf_dbgfs_exit(accel_dev);
70 	adf_cfg_dev_remove(accel_dev);
71 	adf_devmgr_rm_dev(accel_dev, NULL);
72 }
73 
74 static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
75 {
76 	struct adf_accel_dev *accel_dev;
77 	struct adf_accel_pci *accel_pci_dev;
78 	struct adf_hw_device_data *hw_data;
79 	unsigned int i, bar_nr;
80 	unsigned long bar_mask;
81 	int ret;
82 
83 	switch (ent->device) {
84 	case PCI_DEVICE_ID_INTEL_QAT_DH895XCC:
85 		break;
86 	default:
87 		dev_err(&pdev->dev, "Invalid device 0x%x.\n", ent->device);
88 		return -ENODEV;
89 	}
90 
91 	if (num_possible_nodes() > 1 && dev_to_node(&pdev->dev) < 0) {
92 		/* If the accelerator is connected to a node with no memory
93 		 * there is no point in using the accelerator since the remote
94 		 * memory transaction will be very slow. */
95 		dev_err(&pdev->dev, "Invalid NUMA configuration.\n");
96 		return -EINVAL;
97 	}
98 
99 	accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL,
100 				 dev_to_node(&pdev->dev));
101 	if (!accel_dev)
102 		return -ENOMEM;
103 
104 	INIT_LIST_HEAD(&accel_dev->crypto_list);
105 	accel_pci_dev = &accel_dev->accel_pci_dev;
106 	accel_pci_dev->pci_dev = pdev;
107 
108 	/* Add accel device to accel table.
109 	 * This should be called before adf_cleanup_accel is called */
110 	if (adf_devmgr_add_dev(accel_dev, NULL)) {
111 		dev_err(&pdev->dev, "Failed to add new accelerator device.\n");
112 		kfree(accel_dev);
113 		return -EFAULT;
114 	}
115 
116 	accel_dev->owner = THIS_MODULE;
117 	/* Allocate and configure device configuration structure */
118 	hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL,
119 			       dev_to_node(&pdev->dev));
120 	if (!hw_data) {
121 		ret = -ENOMEM;
122 		goto out_err;
123 	}
124 
125 	accel_dev->hw_device = hw_data;
126 	adf_init_hw_data_dh895xcc(accel_dev->hw_device);
127 	pci_read_config_byte(pdev, PCI_REVISION_ID, &accel_pci_dev->revid);
128 	pci_read_config_dword(pdev, ADF_DEVICE_FUSECTL_OFFSET,
129 			      &hw_data->fuses);
130 
131 	/* Get Accelerators and Accelerators Engines masks */
132 	hw_data->accel_mask = hw_data->get_accel_mask(hw_data);
133 	hw_data->ae_mask = hw_data->get_ae_mask(hw_data);
134 	accel_pci_dev->sku = hw_data->get_sku(hw_data);
135 	/* If the device has no acceleration engines then ignore it. */
136 	if (!hw_data->accel_mask || !hw_data->ae_mask ||
137 	    ((~hw_data->ae_mask) & 0x01)) {
138 		dev_err(&pdev->dev, "No acceleration units found");
139 		ret = -EFAULT;
140 		goto out_err;
141 	}
142 
143 	/* Create device configuration table */
144 	ret = adf_cfg_dev_add(accel_dev);
145 	if (ret)
146 		goto out_err;
147 
148 	pcie_set_readrq(pdev, 1024);
149 
150 	/* enable PCI device */
151 	if (pci_enable_device(pdev)) {
152 		ret = -EFAULT;
153 		goto out_err;
154 	}
155 
156 	/* set dma identifier */
157 	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48));
158 	if (ret) {
159 		dev_err(&pdev->dev, "No usable DMA configuration\n");
160 		goto out_err_disable;
161 	}
162 
163 	if (pci_request_regions(pdev, ADF_DH895XCC_DEVICE_NAME)) {
164 		ret = -EFAULT;
165 		goto out_err_disable;
166 	}
167 
168 	/* Get accelerator capabilities mask */
169 	hw_data->accel_capabilities_mask = hw_data->get_accel_cap(accel_dev);
170 
171 	/* Find and map all the device's BARS */
172 	i = 0;
173 	bar_mask = pci_select_bars(pdev, IORESOURCE_MEM);
174 	for_each_set_bit(bar_nr, &bar_mask, ADF_PCI_MAX_BARS * 2) {
175 		struct adf_bar *bar = &accel_pci_dev->pci_bars[i++];
176 
177 		bar->base_addr = pci_resource_start(pdev, bar_nr);
178 		if (!bar->base_addr)
179 			break;
180 		bar->size = pci_resource_len(pdev, bar_nr);
181 		bar->virt_addr = pci_iomap(accel_pci_dev->pci_dev, bar_nr, 0);
182 		if (!bar->virt_addr) {
183 			dev_err(&pdev->dev, "Failed to map BAR %d\n", bar_nr);
184 			ret = -EFAULT;
185 			goto out_err_free_reg;
186 		}
187 	}
188 	pci_set_master(pdev);
189 
190 	if (pci_save_state(pdev)) {
191 		dev_err(&pdev->dev, "Failed to save pci state\n");
192 		ret = -ENOMEM;
193 		goto out_err_free_reg;
194 	}
195 
196 	adf_dbgfs_init(accel_dev);
197 
198 	ret = adf_dev_up(accel_dev, true);
199 	if (ret)
200 		goto out_err_dev_stop;
201 
202 	return ret;
203 
204 out_err_dev_stop:
205 	adf_dev_down(accel_dev);
206 out_err_free_reg:
207 	pci_release_regions(accel_pci_dev->pci_dev);
208 out_err_disable:
209 	pci_disable_device(accel_pci_dev->pci_dev);
210 out_err:
211 	adf_cleanup_accel(accel_dev);
212 	kfree(accel_dev);
213 	return ret;
214 }
215 
216 static void adf_remove(struct pci_dev *pdev)
217 {
218 	struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev);
219 
220 	if (!accel_dev) {
221 		pr_err("QAT: Driver removal failed\n");
222 		return;
223 	}
224 	adf_dev_down(accel_dev);
225 	adf_cleanup_accel(accel_dev);
226 	adf_cleanup_pci_dev(accel_dev);
227 	kfree(accel_dev);
228 }
229 
230 static int __init adfdrv_init(void)
231 {
232 	request_module("intel_qat");
233 
234 	if (pci_register_driver(&adf_driver)) {
235 		pr_err("QAT: Driver initialization failed\n");
236 		return -EFAULT;
237 	}
238 	return 0;
239 }
240 
241 static void __exit adfdrv_release(void)
242 {
243 	pci_unregister_driver(&adf_driver);
244 }
245 
246 module_init(adfdrv_init);
247 module_exit(adfdrv_release);
248 
249 MODULE_LICENSE("Dual BSD/GPL");
250 MODULE_AUTHOR("Intel");
251 MODULE_FIRMWARE(ADF_DH895XCC_FW);
252 MODULE_FIRMWARE(ADF_DH895XCC_MMP);
253 MODULE_DESCRIPTION("Intel(R) QuickAssist Technology");
254 MODULE_VERSION(ADF_DRV_VERSION);
255 MODULE_IMPORT_NS(CRYPTO_QAT);
256