1# SPDX-License-Identifier: GPL-2.0-only 2 3menuconfig CRYPTO_HW 4 bool "Hardware crypto devices" 5 default y 6 help 7 Say Y here to get to see options for hardware crypto devices and 8 processors. This option alone does not add any kernel code. 9 10 If you say N, all options in this submenu will be skipped and disabled. 11 12if CRYPTO_HW 13 14source "drivers/crypto/allwinner/Kconfig" 15 16config CRYPTO_DEV_PADLOCK 17 tristate "Support for VIA PadLock ACE" 18 depends on X86 && !UML 19 help 20 Some VIA processors come with an integrated crypto engine 21 (so called VIA PadLock ACE, Advanced Cryptography Engine) 22 that provides instructions for very fast cryptographic 23 operations with supported algorithms. 24 25 The instructions are used only when the CPU supports them. 26 Otherwise software encryption is used. 27 28config CRYPTO_DEV_PADLOCK_AES 29 tristate "PadLock driver for AES algorithm" 30 depends on CRYPTO_DEV_PADLOCK 31 select CRYPTO_SKCIPHER 32 select CRYPTO_LIB_AES 33 help 34 Use VIA PadLock for AES algorithm. 35 36 Available in VIA C3 and newer CPUs. 37 38 If unsure say M. The compiled module will be 39 called padlock-aes. 40 41config CRYPTO_DEV_PADLOCK_SHA 42 tristate "PadLock driver for SHA1 and SHA256 algorithms" 43 depends on CRYPTO_DEV_PADLOCK 44 select CRYPTO_HASH 45 select CRYPTO_SHA1 46 select CRYPTO_SHA256 47 help 48 Use VIA PadLock for SHA1/SHA256 algorithms. 49 50 Available in VIA C7 and newer processors. 51 52 If unsure say M. The compiled module will be 53 called padlock-sha. 54 55config CRYPTO_DEV_GEODE 56 tristate "Support for the Geode LX AES engine" 57 depends on X86_32 && PCI 58 select CRYPTO_ALGAPI 59 select CRYPTO_SKCIPHER 60 help 61 Say 'Y' here to use the AMD Geode LX processor on-board AES 62 engine for the CryptoAPI AES algorithm. 63 64 To compile this driver as a module, choose M here: the module 65 will be called geode-aes. 66 67config ZCRYPT 68 tristate "Support for s390 cryptographic adapters" 69 depends on S390 70 select HW_RANDOM 71 help 72 Select this option if you want to enable support for 73 s390 cryptographic adapters like Crypto Express 4 up 74 to 8 in Coprocessor (CEXxC), EP11 Coprocessor (CEXxP) 75 or Accelerator (CEXxA) mode. 76 77config ZCRYPT_DEBUG 78 bool "Enable debug features for s390 cryptographic adapters" 79 default n 80 depends on DEBUG_KERNEL 81 depends on ZCRYPT 82 help 83 Say 'Y' here to enable some additional debug features on the 84 s390 cryptographic adapters driver. 85 86 There will be some more sysfs attributes displayed for ap cards 87 and queues and some flags on crypto requests are interpreted as 88 debugging messages to force error injection. 89 90 Do not enable on production level kernel build. 91 92 If unsure, say N. 93 94config PKEY 95 tristate "Kernel API for protected key handling" 96 depends on S390 97 depends on ZCRYPT 98 help 99 With this option enabled the pkey kernel module provides an API 100 for creation and handling of protected keys. Other parts of the 101 kernel or userspace applications may use these functions. 102 103 Select this option if you want to enable the kernel and userspace 104 API for proteced key handling. 105 106 Please note that creation of protected keys from secure keys 107 requires to have at least one CEX card in coprocessor mode 108 available at runtime. 109 110config CRYPTO_PAES_S390 111 tristate "PAES cipher algorithms" 112 depends on S390 113 depends on ZCRYPT 114 depends on PKEY 115 select CRYPTO_ALGAPI 116 select CRYPTO_SKCIPHER 117 help 118 This is the s390 hardware accelerated implementation of the 119 AES cipher algorithms for use with protected key. 120 121 Select this option if you want to use the paes cipher 122 for example to use protected key encrypted devices. 123 124config S390_PRNG 125 tristate "Pseudo random number generator device driver" 126 depends on S390 127 default "m" 128 help 129 Select this option if you want to use the s390 pseudo random number 130 generator. The PRNG is part of the cryptographic processor functions 131 and uses triple-DES to generate secure random numbers like the 132 ANSI X9.17 standard. User-space programs access the 133 pseudo-random-number device through the char device /dev/prandom. 134 135 It is available as of z9. 136 137config CRYPTO_DEV_NIAGARA2 138 tristate "Niagara2 Stream Processing Unit driver" 139 select CRYPTO_LIB_DES 140 select CRYPTO_SKCIPHER 141 select CRYPTO_HASH 142 select CRYPTO_MD5 143 select CRYPTO_SHA1 144 select CRYPTO_SHA256 145 depends on SPARC64 146 help 147 Each core of a Niagara2 processor contains a Stream 148 Processing Unit, which itself contains several cryptographic 149 sub-units. One set provides the Modular Arithmetic Unit, 150 used for SSL offload. The other set provides the Cipher 151 Group, which can perform encryption, decryption, hashing, 152 checksumming, and raw copies. 153 154config CRYPTO_DEV_SL3516 155 tristate "Storlink SL3516 crypto offloader" 156 depends on ARCH_GEMINI || COMPILE_TEST 157 depends on HAS_IOMEM && PM 158 select CRYPTO_SKCIPHER 159 select CRYPTO_ENGINE 160 select CRYPTO_ECB 161 select CRYPTO_AES 162 select HW_RANDOM 163 help 164 This option allows you to have support for SL3516 crypto offloader. 165 166config CRYPTO_DEV_SL3516_DEBUG 167 bool "Enable SL3516 stats" 168 depends on CRYPTO_DEV_SL3516 169 depends on DEBUG_FS 170 help 171 Say y to enable SL3516 debug stats. 172 This will create /sys/kernel/debug/sl3516/stats for displaying 173 the number of requests per algorithm and other internal stats. 174 175config CRYPTO_DEV_HIFN_795X 176 tristate "Driver HIFN 795x crypto accelerator chips" 177 select CRYPTO_LIB_DES 178 select CRYPTO_SKCIPHER 179 select HW_RANDOM if CRYPTO_DEV_HIFN_795X_RNG 180 depends on PCI 181 depends on !ARCH_DMA_ADDR_T_64BIT 182 help 183 This option allows you to have support for HIFN 795x crypto adapters. 184 185config CRYPTO_DEV_HIFN_795X_RNG 186 bool "HIFN 795x random number generator" 187 depends on CRYPTO_DEV_HIFN_795X 188 help 189 Select this option if you want to enable the random number generator 190 on the HIFN 795x crypto adapters. 191 192source "drivers/crypto/caam/Kconfig" 193 194config CRYPTO_DEV_TALITOS 195 tristate "Talitos Freescale Security Engine (SEC)" 196 select CRYPTO_AEAD 197 select CRYPTO_AUTHENC 198 select CRYPTO_SKCIPHER 199 select CRYPTO_HASH 200 select CRYPTO_LIB_DES 201 select HW_RANDOM 202 depends on FSL_SOC 203 help 204 Say 'Y' here to use the Freescale Security Engine (SEC) 205 to offload cryptographic algorithm computation. 206 207 The Freescale SEC is present on PowerQUICC 'E' processors, such 208 as the MPC8349E and MPC8548E. 209 210 To compile this driver as a module, choose M here: the module 211 will be called talitos. 212 213config CRYPTO_DEV_TALITOS1 214 bool "SEC1 (SEC 1.0 and SEC Lite 1.2)" 215 depends on CRYPTO_DEV_TALITOS 216 depends on PPC_8xx || PPC_82xx 217 default y 218 help 219 Say 'Y' here to use the Freescale Security Engine (SEC) version 1.0 220 found on MPC82xx or the Freescale Security Engine (SEC Lite) 221 version 1.2 found on MPC8xx 222 223config CRYPTO_DEV_TALITOS2 224 bool "SEC2+ (SEC version 2.0 or upper)" 225 depends on CRYPTO_DEV_TALITOS 226 default y if !PPC_8xx 227 help 228 Say 'Y' here to use the Freescale Security Engine (SEC) 229 version 2 and following as found on MPC83xx, MPC85xx, etc ... 230 231config CRYPTO_DEV_PPC4XX 232 tristate "Driver AMCC PPC4xx crypto accelerator" 233 depends on PPC && 4xx 234 select CRYPTO_HASH 235 select CRYPTO_AEAD 236 select CRYPTO_AES 237 select CRYPTO_LIB_AES 238 select CRYPTO_CCM 239 select CRYPTO_CTR 240 select CRYPTO_GCM 241 select CRYPTO_SKCIPHER 242 help 243 This option allows you to have support for AMCC crypto acceleration. 244 245config HW_RANDOM_PPC4XX 246 bool "PowerPC 4xx generic true random number generator support" 247 depends on CRYPTO_DEV_PPC4XX && HW_RANDOM=y 248 default y 249 help 250 This option provides the kernel-side support for the TRNG hardware 251 found in the security function of some PowerPC 4xx SoCs. 252 253config CRYPTO_DEV_OMAP 254 tristate "Support for OMAP crypto HW accelerators" 255 depends on ARCH_OMAP2PLUS 256 help 257 OMAP processors have various crypto HW accelerators. Select this if 258 you want to use the OMAP modules for any of the crypto algorithms. 259 260if CRYPTO_DEV_OMAP 261 262config CRYPTO_DEV_OMAP_SHAM 263 tristate "Support for OMAP MD5/SHA1/SHA2 hw accelerator" 264 depends on ARCH_OMAP2PLUS 265 select CRYPTO_ENGINE 266 select CRYPTO_SHA1 267 select CRYPTO_MD5 268 select CRYPTO_SHA256 269 select CRYPTO_SHA512 270 select CRYPTO_HMAC 271 help 272 OMAP processors have MD5/SHA1/SHA2 hw accelerator. Select this if you 273 want to use the OMAP module for MD5/SHA1/SHA2 algorithms. 274 275config CRYPTO_DEV_OMAP_AES 276 tristate "Support for OMAP AES hw engine" 277 depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP2PLUS 278 select CRYPTO_AES 279 select CRYPTO_SKCIPHER 280 select CRYPTO_ENGINE 281 select CRYPTO_CBC 282 select CRYPTO_ECB 283 select CRYPTO_CTR 284 select CRYPTO_AEAD 285 help 286 OMAP processors have AES module accelerator. Select this if you 287 want to use the OMAP module for AES algorithms. 288 289config CRYPTO_DEV_OMAP_DES 290 tristate "Support for OMAP DES/3DES hw engine" 291 depends on ARCH_OMAP2PLUS 292 select CRYPTO_LIB_DES 293 select CRYPTO_SKCIPHER 294 select CRYPTO_ENGINE 295 help 296 OMAP processors have DES/3DES module accelerator. Select this if you 297 want to use the OMAP module for DES and 3DES algorithms. Currently 298 the ECB and CBC modes of operation are supported by the driver. Also 299 accesses made on unaligned boundaries are supported. 300 301endif # CRYPTO_DEV_OMAP 302 303config CRYPTO_DEV_SAHARA 304 tristate "Support for SAHARA crypto accelerator" 305 depends on ARCH_MXC && OF 306 select CRYPTO_SKCIPHER 307 select CRYPTO_AES 308 select CRYPTO_ECB 309 select CRYPTO_ENGINE 310 help 311 This option enables support for the SAHARA HW crypto accelerator 312 found in some Freescale i.MX chips. 313 314config CRYPTO_DEV_EXYNOS_RNG 315 tristate "Exynos HW pseudo random number generator support" 316 depends on ARCH_EXYNOS || COMPILE_TEST 317 depends on HAS_IOMEM 318 select CRYPTO_RNG 319 help 320 This driver provides kernel-side support through the 321 cryptographic API for the pseudo random number generator hardware 322 found on Exynos SoCs. 323 324 To compile this driver as a module, choose M here: the 325 module will be called exynos-rng. 326 327 If unsure, say Y. 328 329config CRYPTO_DEV_S5P 330 tristate "Support for Samsung S5PV210/Exynos crypto accelerator" 331 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 332 depends on HAS_IOMEM 333 select CRYPTO_AES 334 select CRYPTO_SKCIPHER 335 help 336 This option allows you to have support for S5P crypto acceleration. 337 Select this to offload Samsung S5PV210 or S5PC110, Exynos from AES 338 algorithms execution. 339 340config CRYPTO_DEV_EXYNOS_HASH 341 bool "Support for Samsung Exynos HASH accelerator" 342 depends on CRYPTO_DEV_S5P 343 depends on !CRYPTO_DEV_EXYNOS_RNG && CRYPTO_DEV_EXYNOS_RNG!=m 344 select CRYPTO_SHA1 345 select CRYPTO_MD5 346 select CRYPTO_SHA256 347 help 348 Select this to offload Exynos from HASH MD5/SHA1/SHA256. 349 This will select software SHA1, MD5 and SHA256 as they are 350 needed for small and zero-size messages. 351 HASH algorithms will be disabled if EXYNOS_RNG 352 is enabled due to hw conflict. 353 354config CRYPTO_DEV_NX 355 bool "Support for IBM PowerPC Nest (NX) cryptographic acceleration" 356 depends on PPC64 357 help 358 This enables support for the NX hardware cryptographic accelerator 359 coprocessor that is in IBM PowerPC P7+ or later processors. This 360 does not actually enable any drivers, it only allows you to select 361 which acceleration type (encryption and/or compression) to enable. 362 363if CRYPTO_DEV_NX 364 source "drivers/crypto/nx/Kconfig" 365endif 366 367config CRYPTO_DEV_ATMEL_AUTHENC 368 bool "Support for Atmel IPSEC/SSL hw accelerator" 369 depends on ARCH_AT91 || COMPILE_TEST 370 depends on CRYPTO_DEV_ATMEL_AES 371 help 372 Some Atmel processors can combine the AES and SHA hw accelerators 373 to enhance support of IPSEC/SSL. 374 Select this if you want to use the Atmel modules for 375 authenc(hmac(shaX),Y(cbc)) algorithms. 376 377config CRYPTO_DEV_ATMEL_AES 378 tristate "Support for Atmel AES hw accelerator" 379 depends on ARCH_AT91 || COMPILE_TEST 380 select CRYPTO_AES 381 select CRYPTO_AEAD 382 select CRYPTO_SKCIPHER 383 select CRYPTO_AUTHENC if CRYPTO_DEV_ATMEL_AUTHENC 384 select CRYPTO_DEV_ATMEL_SHA if CRYPTO_DEV_ATMEL_AUTHENC 385 help 386 Some Atmel processors have AES hw accelerator. 387 Select this if you want to use the Atmel module for 388 AES algorithms. 389 390 To compile this driver as a module, choose M here: the module 391 will be called atmel-aes. 392 393config CRYPTO_DEV_ATMEL_TDES 394 tristate "Support for Atmel DES/TDES hw accelerator" 395 depends on ARCH_AT91 || COMPILE_TEST 396 select CRYPTO_LIB_DES 397 select CRYPTO_SKCIPHER 398 help 399 Some Atmel processors have DES/TDES hw accelerator. 400 Select this if you want to use the Atmel module for 401 DES/TDES algorithms. 402 403 To compile this driver as a module, choose M here: the module 404 will be called atmel-tdes. 405 406config CRYPTO_DEV_ATMEL_SHA 407 tristate "Support for Atmel SHA hw accelerator" 408 depends on ARCH_AT91 || COMPILE_TEST 409 select CRYPTO_HASH 410 help 411 Some Atmel processors have SHA1/SHA224/SHA256/SHA384/SHA512 412 hw accelerator. 413 Select this if you want to use the Atmel module for 414 SHA1/SHA224/SHA256/SHA384/SHA512 algorithms. 415 416 To compile this driver as a module, choose M here: the module 417 will be called atmel-sha. 418 419config CRYPTO_DEV_ATMEL_I2C 420 tristate 421 select BITREVERSE 422 423config CRYPTO_DEV_ATMEL_ECC 424 tristate "Support for Microchip / Atmel ECC hw accelerator" 425 depends on I2C 426 select CRYPTO_DEV_ATMEL_I2C 427 select CRYPTO_ECDH 428 select CRC16 429 help 430 Microhip / Atmel ECC hw accelerator. 431 Select this if you want to use the Microchip / Atmel module for 432 ECDH algorithm. 433 434 To compile this driver as a module, choose M here: the module 435 will be called atmel-ecc. 436 437config CRYPTO_DEV_ATMEL_SHA204A 438 tristate "Support for Microchip / Atmel SHA accelerator and RNG" 439 depends on I2C 440 select CRYPTO_DEV_ATMEL_I2C 441 select HW_RANDOM 442 select CRC16 443 help 444 Microhip / Atmel SHA accelerator and RNG. 445 Select this if you want to use the Microchip / Atmel SHA204A 446 module as a random number generator. (Other functions of the 447 chip are currently not exposed by this driver) 448 449 To compile this driver as a module, choose M here: the module 450 will be called atmel-sha204a. 451 452config CRYPTO_DEV_CCP 453 bool "Support for AMD Secure Processor" 454 depends on ((X86 && PCI) || (ARM64 && (OF_ADDRESS || ACPI))) && HAS_IOMEM 455 help 456 The AMD Secure Processor provides support for the Cryptographic Coprocessor 457 (CCP) and the Platform Security Processor (PSP) devices. 458 459if CRYPTO_DEV_CCP 460 source "drivers/crypto/ccp/Kconfig" 461endif 462 463config CRYPTO_DEV_MXS_DCP 464 tristate "Support for Freescale MXS DCP" 465 depends on (ARCH_MXS || ARCH_MXC) 466 select STMP_DEVICE 467 select CRYPTO_CBC 468 select CRYPTO_ECB 469 select CRYPTO_AES 470 select CRYPTO_SKCIPHER 471 select CRYPTO_HASH 472 help 473 The Freescale i.MX23/i.MX28 has SHA1/SHA256 and AES128 CBC/ECB 474 co-processor on the die. 475 476 To compile this driver as a module, choose M here: the module 477 will be called mxs-dcp. 478 479source "drivers/crypto/cavium/cpt/Kconfig" 480source "drivers/crypto/cavium/nitrox/Kconfig" 481source "drivers/crypto/marvell/Kconfig" 482source "drivers/crypto/intel/Kconfig" 483 484config CRYPTO_DEV_CAVIUM_ZIP 485 tristate "Cavium ZIP driver" 486 depends on PCI && 64BIT && (ARM64 || COMPILE_TEST) 487 help 488 Select this option if you want to enable compression/decompression 489 acceleration on Cavium's ARM based SoCs 490 491config CRYPTO_DEV_QCE 492 tristate "Qualcomm crypto engine accelerator" 493 depends on ARCH_QCOM || COMPILE_TEST 494 depends on HAS_IOMEM 495 help 496 This driver supports Qualcomm crypto engine accelerator 497 hardware. To compile this driver as a module, choose M here. The 498 module will be called qcrypto. 499 500config CRYPTO_DEV_QCE_SKCIPHER 501 bool 502 depends on CRYPTO_DEV_QCE 503 select CRYPTO_AES 504 select CRYPTO_LIB_DES 505 select CRYPTO_ECB 506 select CRYPTO_CBC 507 select CRYPTO_XTS 508 select CRYPTO_CTR 509 select CRYPTO_SKCIPHER 510 511config CRYPTO_DEV_QCE_SHA 512 bool 513 depends on CRYPTO_DEV_QCE 514 select CRYPTO_SHA1 515 select CRYPTO_SHA256 516 517config CRYPTO_DEV_QCE_AEAD 518 bool 519 depends on CRYPTO_DEV_QCE 520 select CRYPTO_AUTHENC 521 select CRYPTO_LIB_DES 522 523choice 524 prompt "Algorithms enabled for QCE acceleration" 525 default CRYPTO_DEV_QCE_ENABLE_ALL 526 depends on CRYPTO_DEV_QCE 527 help 528 This option allows to choose whether to build support for all algorithms 529 (default), hashes-only, or skciphers-only. 530 531 The QCE engine does not appear to scale as well as the CPU to handle 532 multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the 533 QCE handles only 2 requests in parallel. 534 535 Ipsec throughput seems to improve when disabling either family of 536 algorithms, sharing the load with the CPU. Enabling skciphers-only 537 appears to work best. 538 539 config CRYPTO_DEV_QCE_ENABLE_ALL 540 bool "All supported algorithms" 541 select CRYPTO_DEV_QCE_SKCIPHER 542 select CRYPTO_DEV_QCE_SHA 543 select CRYPTO_DEV_QCE_AEAD 544 help 545 Enable all supported algorithms: 546 - AES (CBC, CTR, ECB, XTS) 547 - 3DES (CBC, ECB) 548 - DES (CBC, ECB) 549 - SHA1, HMAC-SHA1 550 - SHA256, HMAC-SHA256 551 552 config CRYPTO_DEV_QCE_ENABLE_SKCIPHER 553 bool "Symmetric-key ciphers only" 554 select CRYPTO_DEV_QCE_SKCIPHER 555 help 556 Enable symmetric-key ciphers only: 557 - AES (CBC, CTR, ECB, XTS) 558 - 3DES (ECB, CBC) 559 - DES (ECB, CBC) 560 561 config CRYPTO_DEV_QCE_ENABLE_SHA 562 bool "Hash/HMAC only" 563 select CRYPTO_DEV_QCE_SHA 564 help 565 Enable hashes/HMAC algorithms only: 566 - SHA1, HMAC-SHA1 567 - SHA256, HMAC-SHA256 568 569 config CRYPTO_DEV_QCE_ENABLE_AEAD 570 bool "AEAD algorithms only" 571 select CRYPTO_DEV_QCE_AEAD 572 help 573 Enable AEAD algorithms only: 574 - authenc() 575 - ccm(aes) 576 - rfc4309(ccm(aes)) 577endchoice 578 579config CRYPTO_DEV_QCE_SW_MAX_LEN 580 int "Default maximum request size to use software for AES" 581 depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER 582 default 512 583 help 584 This sets the default maximum request size to perform AES requests 585 using software instead of the crypto engine. It can be changed by 586 setting the aes_sw_max_len parameter. 587 588 Small blocks are processed faster in software than hardware. 589 Considering the 256-bit ciphers, software is 2-3 times faster than 590 qce at 256-bytes, 30% faster at 512, and about even at 768-bytes. 591 With 128-bit keys, the break-even point would be around 1024-bytes. 592 593 The default is set a little lower, to 512 bytes, to balance the 594 cost in CPU usage. The minimum recommended setting is 16-bytes 595 (1 AES block), since AES-GCM will fail if you set it lower. 596 Setting this to zero will send all requests to the hardware. 597 598 Note that 192-bit keys are not supported by the hardware and are 599 always processed by the software fallback, and all DES requests 600 are done by the hardware. 601 602config CRYPTO_DEV_QCOM_RNG 603 tristate "Qualcomm Random Number Generator Driver" 604 depends on ARCH_QCOM || COMPILE_TEST 605 depends on HW_RANDOM 606 select CRYPTO_RNG 607 help 608 This driver provides support for the Random Number 609 Generator hardware found on Qualcomm SoCs. 610 611 To compile this driver as a module, choose M here. The 612 module will be called qcom-rng. If unsure, say N. 613 614#config CRYPTO_DEV_VMX 615# bool "Support for VMX cryptographic acceleration instructions" 616# depends on PPC64 && VSX 617# help 618# Support for VMX cryptographic acceleration instructions. 619# 620#source "drivers/crypto/vmx/Kconfig" 621 622config CRYPTO_DEV_IMGTEC_HASH 623 tristate "Imagination Technologies hardware hash accelerator" 624 depends on MIPS || COMPILE_TEST 625 select CRYPTO_MD5 626 select CRYPTO_SHA1 627 select CRYPTO_SHA256 628 select CRYPTO_HASH 629 help 630 This driver interfaces with the Imagination Technologies 631 hardware hash accelerator. Supporting MD5/SHA1/SHA224/SHA256 632 hashing algorithms. 633 634config CRYPTO_DEV_ROCKCHIP 635 tristate "Rockchip's Cryptographic Engine driver" 636 depends on OF && ARCH_ROCKCHIP 637 depends on PM 638 select CRYPTO_ECB 639 select CRYPTO_CBC 640 select CRYPTO_DES 641 select CRYPTO_AES 642 select CRYPTO_ENGINE 643 select CRYPTO_LIB_DES 644 select CRYPTO_MD5 645 select CRYPTO_SHA1 646 select CRYPTO_SHA256 647 select CRYPTO_HASH 648 select CRYPTO_SKCIPHER 649 650 help 651 This driver interfaces with the hardware crypto accelerator. 652 Supporting cbc/ecb chainmode, and aes/des/des3_ede cipher mode. 653 654config CRYPTO_DEV_ROCKCHIP_DEBUG 655 bool "Enable Rockchip crypto stats" 656 depends on CRYPTO_DEV_ROCKCHIP 657 depends on DEBUG_FS 658 help 659 Say y to enable Rockchip crypto debug stats. 660 This will create /sys/kernel/debug/rk3288_crypto/stats for displaying 661 the number of requests per algorithm and other internal stats. 662 663 664config CRYPTO_DEV_ZYNQMP_AES 665 tristate "Support for Xilinx ZynqMP AES hw accelerator" 666 depends on ZYNQMP_FIRMWARE || COMPILE_TEST 667 select CRYPTO_AES 668 select CRYPTO_ENGINE 669 select CRYPTO_AEAD 670 help 671 Xilinx ZynqMP has AES-GCM engine used for symmetric key 672 encryption and decryption. This driver interfaces with AES hw 673 accelerator. Select this if you want to use the ZynqMP module 674 for AES algorithms. 675 676config CRYPTO_DEV_ZYNQMP_SHA3 677 tristate "Support for Xilinx ZynqMP SHA3 hardware accelerator" 678 depends on ZYNQMP_FIRMWARE || COMPILE_TEST 679 select CRYPTO_SHA3 680 help 681 Xilinx ZynqMP has SHA3 engine used for secure hash calculation. 682 This driver interfaces with SHA3 hardware engine. 683 Select this if you want to use the ZynqMP module 684 for SHA3 hash computation. 685 686source "drivers/crypto/chelsio/Kconfig" 687 688source "drivers/crypto/virtio/Kconfig" 689 690config CRYPTO_DEV_BCM_SPU 691 tristate "Broadcom symmetric crypto/hash acceleration support" 692 depends on ARCH_BCM_IPROC 693 depends on MAILBOX 694 default m 695 select CRYPTO_AUTHENC 696 select CRYPTO_LIB_DES 697 select CRYPTO_MD5 698 select CRYPTO_SHA1 699 select CRYPTO_SHA256 700 select CRYPTO_SHA512 701 help 702 This driver provides support for Broadcom crypto acceleration using the 703 Secure Processing Unit (SPU). The SPU driver registers skcipher, 704 ahash, and aead algorithms with the kernel cryptographic API. 705 706source "drivers/crypto/stm32/Kconfig" 707 708config CRYPTO_DEV_SAFEXCEL 709 tristate "Inside Secure's SafeXcel cryptographic engine driver" 710 depends on (OF || PCI || COMPILE_TEST) && HAS_IOMEM 711 select CRYPTO_LIB_AES 712 select CRYPTO_AUTHENC 713 select CRYPTO_SKCIPHER 714 select CRYPTO_LIB_DES 715 select CRYPTO_HASH 716 select CRYPTO_HMAC 717 select CRYPTO_MD5 718 select CRYPTO_SHA1 719 select CRYPTO_SHA256 720 select CRYPTO_SHA512 721 select CRYPTO_CHACHA20POLY1305 722 select CRYPTO_SHA3 723 help 724 This driver interfaces with the SafeXcel EIP-97 and EIP-197 cryptographic 725 engines designed by Inside Secure. It currently accelerates DES, 3DES and 726 AES block ciphers in ECB and CBC mode, as well as SHA1, SHA224, SHA256, 727 SHA384 and SHA512 hash algorithms for both basic hash and HMAC. 728 Additionally, it accelerates combined AES-CBC/HMAC-SHA AEAD operations. 729 730config CRYPTO_DEV_ARTPEC6 731 tristate "Support for Axis ARTPEC-6/7 hardware crypto acceleration." 732 depends on ARM && (ARCH_ARTPEC || COMPILE_TEST) 733 depends on OF 734 select CRYPTO_AEAD 735 select CRYPTO_AES 736 select CRYPTO_ALGAPI 737 select CRYPTO_SKCIPHER 738 select CRYPTO_CTR 739 select CRYPTO_HASH 740 select CRYPTO_SHA1 741 select CRYPTO_SHA256 742 select CRYPTO_SHA512 743 help 744 Enables the driver for the on-chip crypto accelerator 745 of Axis ARTPEC SoCs. 746 747 To compile this driver as a module, choose M here. 748 749config CRYPTO_DEV_CCREE 750 tristate "Support for ARM TrustZone CryptoCell family of security processors" 751 depends on CRYPTO && CRYPTO_HW && OF && HAS_DMA 752 depends on HAS_IOMEM 753 select CRYPTO_HASH 754 select CRYPTO_SKCIPHER 755 select CRYPTO_LIB_DES 756 select CRYPTO_AEAD 757 select CRYPTO_AUTHENC 758 select CRYPTO_SHA1 759 select CRYPTO_MD5 760 select CRYPTO_SHA256 761 select CRYPTO_SHA512 762 select CRYPTO_HMAC 763 select CRYPTO_AES 764 select CRYPTO_CBC 765 select CRYPTO_ECB 766 select CRYPTO_CTR 767 select CRYPTO_XTS 768 select CRYPTO_SM4_GENERIC 769 select CRYPTO_SM3_GENERIC 770 help 771 Say 'Y' to enable a driver for the REE interface of the Arm 772 TrustZone CryptoCell family of processors. Currently the 773 CryptoCell 713, 703, 712, 710 and 630 are supported. 774 Choose this if you wish to use hardware acceleration of 775 cryptographic operations on the system REE. 776 If unsure say Y. 777 778source "drivers/crypto/hisilicon/Kconfig" 779 780source "drivers/crypto/amlogic/Kconfig" 781 782config CRYPTO_DEV_SA2UL 783 tristate "Support for TI security accelerator" 784 depends on ARCH_K3 || COMPILE_TEST 785 select CRYPTO_AES 786 select CRYPTO_ALGAPI 787 select CRYPTO_AUTHENC 788 select CRYPTO_DES 789 select CRYPTO_SHA1 790 select CRYPTO_SHA256 791 select CRYPTO_SHA512 792 select HW_RANDOM 793 select SG_SPLIT 794 help 795 K3 devices include a security accelerator engine that may be 796 used for crypto offload. Select this if you want to use hardware 797 acceleration for cryptographic algorithms on these devices. 798 799source "drivers/crypto/aspeed/Kconfig" 800source "drivers/crypto/starfive/Kconfig" 801 802endif # CRYPTO_HW 803