xref: /linux/drivers/cpufreq/pxa2xx-cpufreq.c (revision b7019ac550eb3916f34d79db583e9b7ea2524afa)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  Copyright (C) 2002,2003 Intrinsyc Software
4  *
5  * History:
6  *   31-Jul-2002 : Initial version [FB]
7  *   29-Jan-2003 : added PXA255 support [FB]
8  *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
9  *
10  * Note:
11  *   This driver may change the memory bus clock rate, but will not do any
12  *   platform specific access timing changes... for example if you have flash
13  *   memory connected to CS0, you will need to register a platform specific
14  *   notifier which will adjust the memory access strobes to maintain a
15  *   minimum strobe width.
16  */
17 
18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
19 
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/sched.h>
23 #include <linux/init.h>
24 #include <linux/cpufreq.h>
25 #include <linux/err.h>
26 #include <linux/regulator/consumer.h>
27 #include <linux/io.h>
28 
29 #include <mach/pxa2xx-regs.h>
30 #include <mach/smemc.h>
31 
32 #ifdef DEBUG
33 static unsigned int freq_debug;
34 module_param(freq_debug, uint, 0);
35 MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
36 #else
37 #define freq_debug  0
38 #endif
39 
40 static struct regulator *vcc_core;
41 
42 static unsigned int pxa27x_maxfreq;
43 module_param(pxa27x_maxfreq, uint, 0);
44 MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
45 		 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
46 
47 struct pxa_cpufreq_data {
48 	struct clk *clk_core;
49 };
50 static struct pxa_cpufreq_data  pxa_cpufreq_data;
51 
52 struct pxa_freqs {
53 	unsigned int khz;
54 	int vmin;
55 	int vmax;
56 };
57 
58 /*
59  * PXA255 definitions
60  */
61 static const struct pxa_freqs pxa255_run_freqs[] =
62 {
63 	/* CPU   MEMBUS		   run  turbo PXbus SDRAM */
64 	{ 99500, -1, -1},	/*  99,   99,   50,   50  */
65 	{132700, -1, -1},	/* 133,  133,   66,   66  */
66 	{199100, -1, -1},	/* 199,  199,   99,   99  */
67 	{265400, -1, -1},	/* 265,  265,  133,   66  */
68 	{331800, -1, -1},	/* 331,  331,  166,   83  */
69 	{398100, -1, -1},	/* 398,  398,  196,   99  */
70 };
71 
72 /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
73 static const struct pxa_freqs pxa255_turbo_freqs[] =
74 {
75 	/* CPU			   run  turbo PXbus SDRAM */
76 	{ 99500, -1, -1},	/*  99,   99,   50,   50  */
77 	{199100, -1, -1},	/*  99,  199,   50,   99  */
78 	{298500, -1, -1},	/*  99,  287,   50,   99  */
79 	{298600, -1, -1},	/* 199,  287,   99,   99  */
80 	{398100, -1, -1},	/* 199,  398,   99,   99  */
81 };
82 
83 #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
84 #define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
85 
86 static struct cpufreq_frequency_table
87 	pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
88 static struct cpufreq_frequency_table
89 	pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
90 
91 static unsigned int pxa255_turbo_table;
92 module_param(pxa255_turbo_table, uint, 0);
93 MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
94 
95 static struct pxa_freqs pxa27x_freqs[] = {
96 	{104000,  900000, 1705000 },
97 	{156000, 1000000, 1705000 },
98 	{208000, 1180000, 1705000 },
99 	{312000, 1250000, 1705000 },
100 	{416000, 1350000, 1705000 },
101 	{520000, 1450000, 1705000 },
102 	{624000, 1550000, 1705000 }
103 };
104 
105 #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
106 static struct cpufreq_frequency_table
107 	pxa27x_freq_table[NUM_PXA27x_FREQS+1];
108 
109 extern unsigned get_clk_frequency_khz(int info);
110 
111 #ifdef CONFIG_REGULATOR
112 
113 static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
114 {
115 	int ret = 0;
116 	int vmin, vmax;
117 
118 	if (!cpu_is_pxa27x())
119 		return 0;
120 
121 	vmin = pxa_freq->vmin;
122 	vmax = pxa_freq->vmax;
123 	if ((vmin == -1) || (vmax == -1))
124 		return 0;
125 
126 	ret = regulator_set_voltage(vcc_core, vmin, vmax);
127 	if (ret)
128 		pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax);
129 	return ret;
130 }
131 
132 static void pxa_cpufreq_init_voltages(void)
133 {
134 	vcc_core = regulator_get(NULL, "vcc_core");
135 	if (IS_ERR(vcc_core)) {
136 		pr_info("Didn't find vcc_core regulator\n");
137 		vcc_core = NULL;
138 	} else {
139 		pr_info("Found vcc_core regulator\n");
140 	}
141 }
142 #else
143 static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
144 {
145 	return 0;
146 }
147 
148 static void pxa_cpufreq_init_voltages(void) { }
149 #endif
150 
151 static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
152 			     const struct pxa_freqs **pxa_freqs)
153 {
154 	if (cpu_is_pxa25x()) {
155 		if (!pxa255_turbo_table) {
156 			*pxa_freqs = pxa255_run_freqs;
157 			*freq_table = pxa255_run_freq_table;
158 		} else {
159 			*pxa_freqs = pxa255_turbo_freqs;
160 			*freq_table = pxa255_turbo_freq_table;
161 		}
162 	} else if (cpu_is_pxa27x()) {
163 		*pxa_freqs = pxa27x_freqs;
164 		*freq_table = pxa27x_freq_table;
165 	} else {
166 		BUG();
167 	}
168 }
169 
170 static void pxa27x_guess_max_freq(void)
171 {
172 	if (!pxa27x_maxfreq) {
173 		pxa27x_maxfreq = 416000;
174 		pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
175 			pxa27x_maxfreq);
176 	} else {
177 		pxa27x_maxfreq *= 1000;
178 	}
179 }
180 
181 static unsigned int pxa_cpufreq_get(unsigned int cpu)
182 {
183 	struct pxa_cpufreq_data *data = cpufreq_get_driver_data();
184 
185 	return (unsigned int) clk_get_rate(data->clk_core) / 1000;
186 }
187 
188 static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
189 {
190 	struct cpufreq_frequency_table *pxa_freqs_table;
191 	const struct pxa_freqs *pxa_freq_settings;
192 	struct pxa_cpufreq_data *data = cpufreq_get_driver_data();
193 	unsigned int new_freq_cpu;
194 	int ret = 0;
195 
196 	/* Get the current policy */
197 	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
198 
199 	new_freq_cpu = pxa_freq_settings[idx].khz;
200 
201 	if (freq_debug)
202 		pr_debug("Changing CPU frequency from %d Mhz to %d Mhz\n",
203 			 policy->cur / 1000,  new_freq_cpu / 1000);
204 
205 	if (vcc_core && new_freq_cpu > policy->cur) {
206 		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
207 		if (ret)
208 			return ret;
209 	}
210 
211 	clk_set_rate(data->clk_core, new_freq_cpu * 1000);
212 
213 	/*
214 	 * Even if voltage setting fails, we don't report it, as the frequency
215 	 * change succeeded. The voltage reduction is not a critical failure,
216 	 * only power savings will suffer from this.
217 	 *
218 	 * Note: if the voltage change fails, and a return value is returned, a
219 	 * bug is triggered (seems a deadlock). Should anybody find out where,
220 	 * the "return 0" should become a "return ret".
221 	 */
222 	if (vcc_core && new_freq_cpu < policy->cur)
223 		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
224 
225 	return 0;
226 }
227 
228 static int pxa_cpufreq_init(struct cpufreq_policy *policy)
229 {
230 	int i;
231 	unsigned int freq;
232 	struct cpufreq_frequency_table *pxa255_freq_table;
233 	const struct pxa_freqs *pxa255_freqs;
234 
235 	/* try to guess pxa27x cpu */
236 	if (cpu_is_pxa27x())
237 		pxa27x_guess_max_freq();
238 
239 	pxa_cpufreq_init_voltages();
240 
241 	/* set default policy and cpuinfo */
242 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
243 
244 	/* Generate pxa25x the run cpufreq_frequency_table struct */
245 	for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
246 		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
247 		pxa255_run_freq_table[i].driver_data = i;
248 	}
249 	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
250 
251 	/* Generate pxa25x the turbo cpufreq_frequency_table struct */
252 	for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
253 		pxa255_turbo_freq_table[i].frequency =
254 			pxa255_turbo_freqs[i].khz;
255 		pxa255_turbo_freq_table[i].driver_data = i;
256 	}
257 	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
258 
259 	pxa255_turbo_table = !!pxa255_turbo_table;
260 
261 	/* Generate the pxa27x cpufreq_frequency_table struct */
262 	for (i = 0; i < NUM_PXA27x_FREQS; i++) {
263 		freq = pxa27x_freqs[i].khz;
264 		if (freq > pxa27x_maxfreq)
265 			break;
266 		pxa27x_freq_table[i].frequency = freq;
267 		pxa27x_freq_table[i].driver_data = i;
268 	}
269 	pxa27x_freq_table[i].driver_data = i;
270 	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
271 
272 	/*
273 	 * Set the policy's minimum and maximum frequencies from the tables
274 	 * just constructed.  This sets cpuinfo.mxx_freq, min and max.
275 	 */
276 	if (cpu_is_pxa25x()) {
277 		find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
278 		pr_info("using %s frequency table\n",
279 			pxa255_turbo_table ? "turbo" : "run");
280 
281 		policy->freq_table = pxa255_freq_table;
282 	}
283 	else if (cpu_is_pxa27x()) {
284 		policy->freq_table = pxa27x_freq_table;
285 	}
286 
287 	pr_info("frequency change support initialized\n");
288 
289 	return 0;
290 }
291 
292 static struct cpufreq_driver pxa_cpufreq_driver = {
293 	.flags	= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
294 	.verify	= cpufreq_generic_frequency_table_verify,
295 	.target_index = pxa_set_target,
296 	.init	= pxa_cpufreq_init,
297 	.get	= pxa_cpufreq_get,
298 	.name	= "PXA2xx",
299 	.driver_data = &pxa_cpufreq_data,
300 };
301 
302 static int __init pxa_cpu_init(void)
303 {
304 	int ret = -ENODEV;
305 
306 	pxa_cpufreq_data.clk_core = clk_get_sys(NULL, "core");
307 	if (IS_ERR(pxa_cpufreq_data.clk_core))
308 		return PTR_ERR(pxa_cpufreq_data.clk_core);
309 
310 	if (cpu_is_pxa25x() || cpu_is_pxa27x())
311 		ret = cpufreq_register_driver(&pxa_cpufreq_driver);
312 	return ret;
313 }
314 
315 static void __exit pxa_cpu_exit(void)
316 {
317 	cpufreq_unregister_driver(&pxa_cpufreq_driver);
318 }
319 
320 
321 MODULE_AUTHOR("Intrinsyc Software Inc.");
322 MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
323 MODULE_LICENSE("GPL");
324 module_init(pxa_cpu_init);
325 module_exit(pxa_cpu_exit);
326