xref: /linux/drivers/cpufreq/powernow-k7.c (revision c4ee0af3fa0dc65f690fc908f02b8355f9576ea0)
1 /*
2  *  AMD K7 Powernow driver.
3  *  (C) 2003 Dave Jones on behalf of SuSE Labs.
4  *  (C) 2003-2004 Dave Jones <davej@redhat.com>
5  *
6  *  Licensed under the terms of the GNU GPL License version 2.
7  *  Based upon datasheets & sample CPUs kindly provided by AMD.
8  *
9  * Errata 5:
10  *  CPU may fail to execute a FID/VID change in presence of interrupt.
11  *  - We cli/sti on stepping A0 CPUs around the FID/VID transition.
12  * Errata 15:
13  *  CPU with half frequency multipliers may hang upon wakeup from disconnect.
14  *  - We disable half multipliers if ACPI is used on A0 stepping CPUs.
15  */
16 
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/moduleparam.h>
20 #include <linux/init.h>
21 #include <linux/cpufreq.h>
22 #include <linux/slab.h>
23 #include <linux/string.h>
24 #include <linux/dmi.h>
25 #include <linux/timex.h>
26 #include <linux/io.h>
27 
28 #include <asm/timer.h>		/* Needed for recalibrate_cpu_khz() */
29 #include <asm/msr.h>
30 #include <asm/cpu_device_id.h>
31 
32 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
33 #include <linux/acpi.h>
34 #include <acpi/processor.h>
35 #endif
36 
37 #include "powernow-k7.h"
38 
39 #define PFX "powernow: "
40 
41 
42 struct psb_s {
43 	u8 signature[10];
44 	u8 tableversion;
45 	u8 flags;
46 	u16 settlingtime;
47 	u8 reserved1;
48 	u8 numpst;
49 };
50 
51 struct pst_s {
52 	u32 cpuid;
53 	u8 fsbspeed;
54 	u8 maxfid;
55 	u8 startvid;
56 	u8 numpstates;
57 };
58 
59 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
60 union powernow_acpi_control_t {
61 	struct {
62 		unsigned long fid:5,
63 			vid:5,
64 			sgtc:20,
65 			res1:2;
66 	} bits;
67 	unsigned long val;
68 };
69 #endif
70 
71 /* divide by 1000 to get VCore voltage in V. */
72 static const int mobile_vid_table[32] = {
73     2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
74     1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
75     1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
76     1075, 1050, 1025, 1000, 975, 950, 925, 0,
77 };
78 
79 /* divide by 10 to get FID. */
80 static const int fid_codes[32] = {
81     110, 115, 120, 125, 50, 55, 60, 65,
82     70, 75, 80, 85, 90, 95, 100, 105,
83     30, 190, 40, 200, 130, 135, 140, 210,
84     150, 225, 160, 165, 170, 180, -1, -1,
85 };
86 
87 /* This parameter is used in order to force ACPI instead of legacy method for
88  * configuration purpose.
89  */
90 
91 static int acpi_force;
92 
93 static struct cpufreq_frequency_table *powernow_table;
94 
95 static unsigned int can_scale_bus;
96 static unsigned int can_scale_vid;
97 static unsigned int minimum_speed = -1;
98 static unsigned int maximum_speed;
99 static unsigned int number_scales;
100 static unsigned int fsb;
101 static unsigned int latency;
102 static char have_a0;
103 
104 static int check_fsb(unsigned int fsbspeed)
105 {
106 	int delta;
107 	unsigned int f = fsb / 1000;
108 
109 	delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
110 	return delta < 5;
111 }
112 
113 static const struct x86_cpu_id powernow_k7_cpuids[] = {
114 	{ X86_VENDOR_AMD, 6, },
115 	{}
116 };
117 MODULE_DEVICE_TABLE(x86cpu, powernow_k7_cpuids);
118 
119 static int check_powernow(void)
120 {
121 	struct cpuinfo_x86 *c = &cpu_data(0);
122 	unsigned int maxei, eax, ebx, ecx, edx;
123 
124 	if (!x86_match_cpu(powernow_k7_cpuids))
125 		return 0;
126 
127 	/* Get maximum capabilities */
128 	maxei = cpuid_eax(0x80000000);
129 	if (maxei < 0x80000007) {	/* Any powernow info ? */
130 #ifdef MODULE
131 		printk(KERN_INFO PFX "No powernow capabilities detected\n");
132 #endif
133 		return 0;
134 	}
135 
136 	if ((c->x86_model == 6) && (c->x86_mask == 0)) {
137 		printk(KERN_INFO PFX "K7 660[A0] core detected, "
138 				"enabling errata workarounds\n");
139 		have_a0 = 1;
140 	}
141 
142 	cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
143 
144 	/* Check we can actually do something before we say anything.*/
145 	if (!(edx & (1 << 1 | 1 << 2)))
146 		return 0;
147 
148 	printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
149 
150 	if (edx & 1 << 1) {
151 		printk("frequency");
152 		can_scale_bus = 1;
153 	}
154 
155 	if ((edx & (1 << 1 | 1 << 2)) == 0x6)
156 		printk(" and ");
157 
158 	if (edx & 1 << 2) {
159 		printk("voltage");
160 		can_scale_vid = 1;
161 	}
162 
163 	printk(".\n");
164 	return 1;
165 }
166 
167 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
168 static void invalidate_entry(unsigned int entry)
169 {
170 	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
171 }
172 #endif
173 
174 static int get_ranges(unsigned char *pst)
175 {
176 	unsigned int j;
177 	unsigned int speed;
178 	u8 fid, vid;
179 
180 	powernow_table = kzalloc((sizeof(*powernow_table) *
181 				(number_scales + 1)), GFP_KERNEL);
182 	if (!powernow_table)
183 		return -ENOMEM;
184 
185 	for (j = 0 ; j < number_scales; j++) {
186 		fid = *pst++;
187 
188 		powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
189 		powernow_table[j].driver_data = fid; /* lower 8 bits */
190 
191 		speed = powernow_table[j].frequency;
192 
193 		if ((fid_codes[fid] % 10) == 5) {
194 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
195 			if (have_a0 == 1)
196 				invalidate_entry(j);
197 #endif
198 		}
199 
200 		if (speed < minimum_speed)
201 			minimum_speed = speed;
202 		if (speed > maximum_speed)
203 			maximum_speed = speed;
204 
205 		vid = *pst++;
206 		powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */
207 
208 		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
209 			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
210 			 fid_codes[fid] % 10, speed/1000, vid,
211 			 mobile_vid_table[vid]/1000,
212 			 mobile_vid_table[vid]%1000);
213 	}
214 	powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
215 	powernow_table[number_scales].driver_data = 0;
216 
217 	return 0;
218 }
219 
220 
221 static void change_FID(int fid)
222 {
223 	union msr_fidvidctl fidvidctl;
224 
225 	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
226 	if (fidvidctl.bits.FID != fid) {
227 		fidvidctl.bits.SGTC = latency;
228 		fidvidctl.bits.FID = fid;
229 		fidvidctl.bits.VIDC = 0;
230 		fidvidctl.bits.FIDC = 1;
231 		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
232 	}
233 }
234 
235 
236 static void change_VID(int vid)
237 {
238 	union msr_fidvidctl fidvidctl;
239 
240 	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
241 	if (fidvidctl.bits.VID != vid) {
242 		fidvidctl.bits.SGTC = latency;
243 		fidvidctl.bits.VID = vid;
244 		fidvidctl.bits.FIDC = 0;
245 		fidvidctl.bits.VIDC = 1;
246 		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
247 	}
248 }
249 
250 
251 static int powernow_target(struct cpufreq_policy *policy, unsigned int index)
252 {
253 	u8 fid, vid;
254 	struct cpufreq_freqs freqs;
255 	union msr_fidvidstatus fidvidstatus;
256 	int cfid;
257 
258 	/* fid are the lower 8 bits of the index we stored into
259 	 * the cpufreq frequency table in powernow_decode_bios,
260 	 * vid are the upper 8 bits.
261 	 */
262 
263 	fid = powernow_table[index].driver_data & 0xFF;
264 	vid = (powernow_table[index].driver_data & 0xFF00) >> 8;
265 
266 	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
267 	cfid = fidvidstatus.bits.CFID;
268 	freqs.old = fsb * fid_codes[cfid] / 10;
269 
270 	freqs.new = powernow_table[index].frequency;
271 
272 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
273 
274 	/* Now do the magic poking into the MSRs.  */
275 
276 	if (have_a0 == 1)	/* A0 errata 5 */
277 		local_irq_disable();
278 
279 	if (freqs.old > freqs.new) {
280 		/* Going down, so change FID first */
281 		change_FID(fid);
282 		change_VID(vid);
283 	} else {
284 		/* Going up, so change VID first */
285 		change_VID(vid);
286 		change_FID(fid);
287 	}
288 
289 
290 	if (have_a0 == 1)
291 		local_irq_enable();
292 
293 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
294 
295 	return 0;
296 }
297 
298 
299 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
300 
301 static struct acpi_processor_performance *acpi_processor_perf;
302 
303 static int powernow_acpi_init(void)
304 {
305 	int i;
306 	int retval = 0;
307 	union powernow_acpi_control_t pc;
308 
309 	if (acpi_processor_perf != NULL && powernow_table != NULL) {
310 		retval = -EINVAL;
311 		goto err0;
312 	}
313 
314 	acpi_processor_perf = kzalloc(sizeof(*acpi_processor_perf), GFP_KERNEL);
315 	if (!acpi_processor_perf) {
316 		retval = -ENOMEM;
317 		goto err0;
318 	}
319 
320 	if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
321 								GFP_KERNEL)) {
322 		retval = -ENOMEM;
323 		goto err05;
324 	}
325 
326 	if (acpi_processor_register_performance(acpi_processor_perf, 0)) {
327 		retval = -EIO;
328 		goto err1;
329 	}
330 
331 	if (acpi_processor_perf->control_register.space_id !=
332 			ACPI_ADR_SPACE_FIXED_HARDWARE) {
333 		retval = -ENODEV;
334 		goto err2;
335 	}
336 
337 	if (acpi_processor_perf->status_register.space_id !=
338 			ACPI_ADR_SPACE_FIXED_HARDWARE) {
339 		retval = -ENODEV;
340 		goto err2;
341 	}
342 
343 	number_scales = acpi_processor_perf->state_count;
344 
345 	if (number_scales < 2) {
346 		retval = -ENODEV;
347 		goto err2;
348 	}
349 
350 	powernow_table = kzalloc((sizeof(*powernow_table) *
351 				(number_scales + 1)), GFP_KERNEL);
352 	if (!powernow_table) {
353 		retval = -ENOMEM;
354 		goto err2;
355 	}
356 
357 	pc.val = (unsigned long) acpi_processor_perf->states[0].control;
358 	for (i = 0; i < number_scales; i++) {
359 		u8 fid, vid;
360 		struct acpi_processor_px *state =
361 			&acpi_processor_perf->states[i];
362 		unsigned int speed, speed_mhz;
363 
364 		pc.val = (unsigned long) state->control;
365 		pr_debug("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
366 			 i,
367 			 (u32) state->core_frequency,
368 			 (u32) state->power,
369 			 (u32) state->transition_latency,
370 			 (u32) state->control,
371 			 pc.bits.sgtc);
372 
373 		vid = pc.bits.vid;
374 		fid = pc.bits.fid;
375 
376 		powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
377 		powernow_table[i].driver_data = fid; /* lower 8 bits */
378 		powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */
379 
380 		speed = powernow_table[i].frequency;
381 		speed_mhz = speed / 1000;
382 
383 		/* processor_perflib will multiply the MHz value by 1000 to
384 		 * get a KHz value (e.g. 1266000). However, powernow-k7 works
385 		 * with true KHz values (e.g. 1266768). To ensure that all
386 		 * powernow frequencies are available, we must ensure that
387 		 * ACPI doesn't restrict them, so we round up the MHz value
388 		 * to ensure that perflib's computed KHz value is greater than
389 		 * or equal to powernow's KHz value.
390 		 */
391 		if (speed % 1000 > 0)
392 			speed_mhz++;
393 
394 		if ((fid_codes[fid] % 10) == 5) {
395 			if (have_a0 == 1)
396 				invalidate_entry(i);
397 		}
398 
399 		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
400 			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
401 			 fid_codes[fid] % 10, speed_mhz, vid,
402 			 mobile_vid_table[vid]/1000,
403 			 mobile_vid_table[vid]%1000);
404 
405 		if (state->core_frequency != speed_mhz) {
406 			state->core_frequency = speed_mhz;
407 			pr_debug("   Corrected ACPI frequency to %d\n",
408 				speed_mhz);
409 		}
410 
411 		if (latency < pc.bits.sgtc)
412 			latency = pc.bits.sgtc;
413 
414 		if (speed < minimum_speed)
415 			minimum_speed = speed;
416 		if (speed > maximum_speed)
417 			maximum_speed = speed;
418 	}
419 
420 	powernow_table[i].frequency = CPUFREQ_TABLE_END;
421 	powernow_table[i].driver_data = 0;
422 
423 	/* notify BIOS that we exist */
424 	acpi_processor_notify_smm(THIS_MODULE);
425 
426 	return 0;
427 
428 err2:
429 	acpi_processor_unregister_performance(acpi_processor_perf, 0);
430 err1:
431 	free_cpumask_var(acpi_processor_perf->shared_cpu_map);
432 err05:
433 	kfree(acpi_processor_perf);
434 err0:
435 	printk(KERN_WARNING PFX "ACPI perflib can not be used on "
436 			"this platform\n");
437 	acpi_processor_perf = NULL;
438 	return retval;
439 }
440 #else
441 static int powernow_acpi_init(void)
442 {
443 	printk(KERN_INFO PFX "no support for ACPI processor found."
444 	       "  Please recompile your kernel with ACPI processor\n");
445 	return -EINVAL;
446 }
447 #endif
448 
449 static void print_pst_entry(struct pst_s *pst, unsigned int j)
450 {
451 	pr_debug("PST:%d (@%p)\n", j, pst);
452 	pr_debug(" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
453 		pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
454 }
455 
456 static int powernow_decode_bios(int maxfid, int startvid)
457 {
458 	struct psb_s *psb;
459 	struct pst_s *pst;
460 	unsigned int i, j;
461 	unsigned char *p;
462 	unsigned int etuple;
463 	unsigned int ret;
464 
465 	etuple = cpuid_eax(0x80000001);
466 
467 	for (i = 0xC0000; i < 0xffff0 ; i += 16) {
468 
469 		p = phys_to_virt(i);
470 
471 		if (memcmp(p, "AMDK7PNOW!",  10) == 0) {
472 			pr_debug("Found PSB header at %p\n", p);
473 			psb = (struct psb_s *) p;
474 			pr_debug("Table version: 0x%x\n", psb->tableversion);
475 			if (psb->tableversion != 0x12) {
476 				printk(KERN_INFO PFX "Sorry, only v1.2 tables"
477 						" supported right now\n");
478 				return -ENODEV;
479 			}
480 
481 			pr_debug("Flags: 0x%x\n", psb->flags);
482 			if ((psb->flags & 1) == 0)
483 				pr_debug("Mobile voltage regulator\n");
484 			else
485 				pr_debug("Desktop voltage regulator\n");
486 
487 			latency = psb->settlingtime;
488 			if (latency < 100) {
489 				printk(KERN_INFO PFX "BIOS set settling time "
490 						"to %d microseconds. "
491 						"Should be at least 100. "
492 						"Correcting.\n", latency);
493 				latency = 100;
494 			}
495 			pr_debug("Settling Time: %d microseconds.\n",
496 					psb->settlingtime);
497 			pr_debug("Has %d PST tables. (Only dumping ones "
498 					"relevant to this CPU).\n",
499 					psb->numpst);
500 
501 			p += sizeof(*psb);
502 
503 			pst = (struct pst_s *) p;
504 
505 			for (j = 0; j < psb->numpst; j++) {
506 				pst = (struct pst_s *) p;
507 				number_scales = pst->numpstates;
508 
509 				if ((etuple == pst->cpuid) &&
510 				    check_fsb(pst->fsbspeed) &&
511 				    (maxfid == pst->maxfid) &&
512 				    (startvid == pst->startvid)) {
513 					print_pst_entry(pst, j);
514 					p = (char *)pst + sizeof(*pst);
515 					ret = get_ranges(p);
516 					return ret;
517 				} else {
518 					unsigned int k;
519 					p = (char *)pst + sizeof(*pst);
520 					for (k = 0; k < number_scales; k++)
521 						p += 2;
522 				}
523 			}
524 			printk(KERN_INFO PFX "No PST tables match this cpuid "
525 					"(0x%x)\n", etuple);
526 			printk(KERN_INFO PFX "This is indicative of a broken "
527 					"BIOS.\n");
528 
529 			return -EINVAL;
530 		}
531 		p++;
532 	}
533 
534 	return -ENODEV;
535 }
536 
537 
538 /*
539  * We use the fact that the bus frequency is somehow
540  * a multiple of 100000/3 khz, then we compute sgtc according
541  * to this multiple.
542  * That way, we match more how AMD thinks all of that work.
543  * We will then get the same kind of behaviour already tested under
544  * the "well-known" other OS.
545  */
546 static int fixup_sgtc(void)
547 {
548 	unsigned int sgtc;
549 	unsigned int m;
550 
551 	m = fsb / 3333;
552 	if ((m % 10) >= 5)
553 		m += 5;
554 
555 	m /= 10;
556 
557 	sgtc = 100 * m * latency;
558 	sgtc = sgtc / 3;
559 	if (sgtc > 0xfffff) {
560 		printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
561 		sgtc = 0xfffff;
562 	}
563 	return sgtc;
564 }
565 
566 static unsigned int powernow_get(unsigned int cpu)
567 {
568 	union msr_fidvidstatus fidvidstatus;
569 	unsigned int cfid;
570 
571 	if (cpu)
572 		return 0;
573 	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
574 	cfid = fidvidstatus.bits.CFID;
575 
576 	return fsb * fid_codes[cfid] / 10;
577 }
578 
579 
580 static int acer_cpufreq_pst(const struct dmi_system_id *d)
581 {
582 	printk(KERN_WARNING PFX
583 		"%s laptop with broken PST tables in BIOS detected.\n",
584 		d->ident);
585 	printk(KERN_WARNING PFX
586 		"You need to downgrade to 3A21 (09/09/2002), or try a newer "
587 		"BIOS than 3A71 (01/20/2003)\n");
588 	printk(KERN_WARNING PFX
589 		"cpufreq scaling has been disabled as a result of this.\n");
590 	return 0;
591 }
592 
593 /*
594  * Some Athlon laptops have really fucked PST tables.
595  * A BIOS update is all that can save them.
596  * Mention this, and disable cpufreq.
597  */
598 static struct dmi_system_id powernow_dmi_table[] = {
599 	{
600 		.callback = acer_cpufreq_pst,
601 		.ident = "Acer Aspire",
602 		.matches = {
603 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"),
604 			DMI_MATCH(DMI_BIOS_VERSION, "3A71"),
605 		},
606 	},
607 	{ }
608 };
609 
610 static int powernow_cpu_init(struct cpufreq_policy *policy)
611 {
612 	union msr_fidvidstatus fidvidstatus;
613 	int result;
614 
615 	if (policy->cpu != 0)
616 		return -ENODEV;
617 
618 	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
619 
620 	recalibrate_cpu_khz();
621 
622 	fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
623 	if (!fsb) {
624 		printk(KERN_WARNING PFX "can not determine bus frequency\n");
625 		return -EINVAL;
626 	}
627 	pr_debug("FSB: %3dMHz\n", fsb/1000);
628 
629 	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
630 		printk(KERN_INFO PFX "PSB/PST known to be broken.  "
631 				"Trying ACPI instead\n");
632 		result = powernow_acpi_init();
633 	} else {
634 		result = powernow_decode_bios(fidvidstatus.bits.MFID,
635 				fidvidstatus.bits.SVID);
636 		if (result) {
637 			printk(KERN_INFO PFX "Trying ACPI perflib\n");
638 			maximum_speed = 0;
639 			minimum_speed = -1;
640 			latency = 0;
641 			result = powernow_acpi_init();
642 			if (result) {
643 				printk(KERN_INFO PFX
644 					"ACPI and legacy methods failed\n");
645 			}
646 		} else {
647 			/* SGTC use the bus clock as timer */
648 			latency = fixup_sgtc();
649 			printk(KERN_INFO PFX "SGTC: %d\n", latency);
650 		}
651 	}
652 
653 	if (result)
654 		return result;
655 
656 	printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
657 				minimum_speed/1000, maximum_speed/1000);
658 
659 	policy->cpuinfo.transition_latency =
660 		cpufreq_scale(2000000UL, fsb, latency);
661 
662 	return cpufreq_table_validate_and_show(policy, powernow_table);
663 }
664 
665 static int powernow_cpu_exit(struct cpufreq_policy *policy)
666 {
667 	cpufreq_frequency_table_put_attr(policy->cpu);
668 
669 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
670 	if (acpi_processor_perf) {
671 		acpi_processor_unregister_performance(acpi_processor_perf, 0);
672 		free_cpumask_var(acpi_processor_perf->shared_cpu_map);
673 		kfree(acpi_processor_perf);
674 	}
675 #endif
676 
677 	kfree(powernow_table);
678 	return 0;
679 }
680 
681 static struct cpufreq_driver powernow_driver = {
682 	.verify		= cpufreq_generic_frequency_table_verify,
683 	.target_index	= powernow_target,
684 	.get		= powernow_get,
685 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
686 	.bios_limit	= acpi_processor_get_bios_limit,
687 #endif
688 	.init		= powernow_cpu_init,
689 	.exit		= powernow_cpu_exit,
690 	.name		= "powernow-k7",
691 	.attr		= cpufreq_generic_attr,
692 };
693 
694 static int __init powernow_init(void)
695 {
696 	if (check_powernow() == 0)
697 		return -ENODEV;
698 	return cpufreq_register_driver(&powernow_driver);
699 }
700 
701 
702 static void __exit powernow_exit(void)
703 {
704 	cpufreq_unregister_driver(&powernow_driver);
705 }
706 
707 module_param(acpi_force,  int, 0444);
708 MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
709 
710 MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
711 MODULE_DESCRIPTION("Powernow driver for AMD K7 processors.");
712 MODULE_LICENSE("GPL");
713 
714 late_initcall(powernow_init);
715 module_exit(powernow_exit);
716 
717