1 /* 2 * AMD K7 Powernow driver. 3 * (C) 2003 Dave Jones on behalf of SuSE Labs. 4 * (C) 2003-2004 Dave Jones <davej@redhat.com> 5 * 6 * Licensed under the terms of the GNU GPL License version 2. 7 * Based upon datasheets & sample CPUs kindly provided by AMD. 8 * 9 * Errata 5: 10 * CPU may fail to execute a FID/VID change in presence of interrupt. 11 * - We cli/sti on stepping A0 CPUs around the FID/VID transition. 12 * Errata 15: 13 * CPU with half frequency multipliers may hang upon wakeup from disconnect. 14 * - We disable half multipliers if ACPI is used on A0 stepping CPUs. 15 */ 16 17 #include <linux/kernel.h> 18 #include <linux/module.h> 19 #include <linux/moduleparam.h> 20 #include <linux/init.h> 21 #include <linux/cpufreq.h> 22 #include <linux/slab.h> 23 #include <linux/string.h> 24 #include <linux/dmi.h> 25 #include <linux/timex.h> 26 #include <linux/io.h> 27 28 #include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */ 29 #include <asm/msr.h> 30 #include <asm/cpu_device_id.h> 31 32 #ifdef CONFIG_X86_POWERNOW_K7_ACPI 33 #include <linux/acpi.h> 34 #include <acpi/processor.h> 35 #endif 36 37 #include "powernow-k7.h" 38 39 #define PFX "powernow: " 40 41 42 struct psb_s { 43 u8 signature[10]; 44 u8 tableversion; 45 u8 flags; 46 u16 settlingtime; 47 u8 reserved1; 48 u8 numpst; 49 }; 50 51 struct pst_s { 52 u32 cpuid; 53 u8 fsbspeed; 54 u8 maxfid; 55 u8 startvid; 56 u8 numpstates; 57 }; 58 59 #ifdef CONFIG_X86_POWERNOW_K7_ACPI 60 union powernow_acpi_control_t { 61 struct { 62 unsigned long fid:5, 63 vid:5, 64 sgtc:20, 65 res1:2; 66 } bits; 67 unsigned long val; 68 }; 69 #endif 70 71 /* divide by 1000 to get VCore voltage in V. */ 72 static const int mobile_vid_table[32] = { 73 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, 74 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, 75 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, 76 1075, 1050, 1025, 1000, 975, 950, 925, 0, 77 }; 78 79 /* divide by 10 to get FID. */ 80 static const int fid_codes[32] = { 81 110, 115, 120, 125, 50, 55, 60, 65, 82 70, 75, 80, 85, 90, 95, 100, 105, 83 30, 190, 40, 200, 130, 135, 140, 210, 84 150, 225, 160, 165, 170, 180, -1, -1, 85 }; 86 87 /* This parameter is used in order to force ACPI instead of legacy method for 88 * configuration purpose. 89 */ 90 91 static int acpi_force; 92 93 static struct cpufreq_frequency_table *powernow_table; 94 95 static unsigned int can_scale_bus; 96 static unsigned int can_scale_vid; 97 static unsigned int minimum_speed = -1; 98 static unsigned int maximum_speed; 99 static unsigned int number_scales; 100 static unsigned int fsb; 101 static unsigned int latency; 102 static char have_a0; 103 104 static int check_fsb(unsigned int fsbspeed) 105 { 106 int delta; 107 unsigned int f = fsb / 1000; 108 109 delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; 110 return delta < 5; 111 } 112 113 static const struct x86_cpu_id powernow_k7_cpuids[] = { 114 { X86_VENDOR_AMD, 6, }, 115 {} 116 }; 117 MODULE_DEVICE_TABLE(x86cpu, powernow_k7_cpuids); 118 119 static int check_powernow(void) 120 { 121 struct cpuinfo_x86 *c = &cpu_data(0); 122 unsigned int maxei, eax, ebx, ecx, edx; 123 124 if (!x86_match_cpu(powernow_k7_cpuids)) 125 return 0; 126 127 /* Get maximum capabilities */ 128 maxei = cpuid_eax(0x80000000); 129 if (maxei < 0x80000007) { /* Any powernow info ? */ 130 #ifdef MODULE 131 printk(KERN_INFO PFX "No powernow capabilities detected\n"); 132 #endif 133 return 0; 134 } 135 136 if ((c->x86_model == 6) && (c->x86_mask == 0)) { 137 printk(KERN_INFO PFX "K7 660[A0] core detected, " 138 "enabling errata workarounds\n"); 139 have_a0 = 1; 140 } 141 142 cpuid(0x80000007, &eax, &ebx, &ecx, &edx); 143 144 /* Check we can actually do something before we say anything.*/ 145 if (!(edx & (1 << 1 | 1 << 2))) 146 return 0; 147 148 printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); 149 150 if (edx & 1 << 1) { 151 printk("frequency"); 152 can_scale_bus = 1; 153 } 154 155 if ((edx & (1 << 1 | 1 << 2)) == 0x6) 156 printk(" and "); 157 158 if (edx & 1 << 2) { 159 printk("voltage"); 160 can_scale_vid = 1; 161 } 162 163 printk(".\n"); 164 return 1; 165 } 166 167 #ifdef CONFIG_X86_POWERNOW_K7_ACPI 168 static void invalidate_entry(unsigned int entry) 169 { 170 powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; 171 } 172 #endif 173 174 static int get_ranges(unsigned char *pst) 175 { 176 unsigned int j; 177 unsigned int speed; 178 u8 fid, vid; 179 180 powernow_table = kzalloc((sizeof(*powernow_table) * 181 (number_scales + 1)), GFP_KERNEL); 182 if (!powernow_table) 183 return -ENOMEM; 184 185 for (j = 0 ; j < number_scales; j++) { 186 fid = *pst++; 187 188 powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; 189 powernow_table[j].driver_data = fid; /* lower 8 bits */ 190 191 speed = powernow_table[j].frequency; 192 193 if ((fid_codes[fid] % 10) == 5) { 194 #ifdef CONFIG_X86_POWERNOW_K7_ACPI 195 if (have_a0 == 1) 196 invalidate_entry(j); 197 #endif 198 } 199 200 if (speed < minimum_speed) 201 minimum_speed = speed; 202 if (speed > maximum_speed) 203 maximum_speed = speed; 204 205 vid = *pst++; 206 powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */ 207 208 pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " 209 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, 210 fid_codes[fid] % 10, speed/1000, vid, 211 mobile_vid_table[vid]/1000, 212 mobile_vid_table[vid]%1000); 213 } 214 powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; 215 powernow_table[number_scales].driver_data = 0; 216 217 return 0; 218 } 219 220 221 static void change_FID(int fid) 222 { 223 union msr_fidvidctl fidvidctl; 224 225 rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); 226 if (fidvidctl.bits.FID != fid) { 227 fidvidctl.bits.SGTC = latency; 228 fidvidctl.bits.FID = fid; 229 fidvidctl.bits.VIDC = 0; 230 fidvidctl.bits.FIDC = 1; 231 wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); 232 } 233 } 234 235 236 static void change_VID(int vid) 237 { 238 union msr_fidvidctl fidvidctl; 239 240 rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); 241 if (fidvidctl.bits.VID != vid) { 242 fidvidctl.bits.SGTC = latency; 243 fidvidctl.bits.VID = vid; 244 fidvidctl.bits.FIDC = 0; 245 fidvidctl.bits.VIDC = 1; 246 wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); 247 } 248 } 249 250 251 static int powernow_target(struct cpufreq_policy *policy, unsigned int index) 252 { 253 u8 fid, vid; 254 struct cpufreq_freqs freqs; 255 union msr_fidvidstatus fidvidstatus; 256 int cfid; 257 258 /* fid are the lower 8 bits of the index we stored into 259 * the cpufreq frequency table in powernow_decode_bios, 260 * vid are the upper 8 bits. 261 */ 262 263 fid = powernow_table[index].driver_data & 0xFF; 264 vid = (powernow_table[index].driver_data & 0xFF00) >> 8; 265 266 rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); 267 cfid = fidvidstatus.bits.CFID; 268 freqs.old = fsb * fid_codes[cfid] / 10; 269 270 freqs.new = powernow_table[index].frequency; 271 272 /* Now do the magic poking into the MSRs. */ 273 274 if (have_a0 == 1) /* A0 errata 5 */ 275 local_irq_disable(); 276 277 if (freqs.old > freqs.new) { 278 /* Going down, so change FID first */ 279 change_FID(fid); 280 change_VID(vid); 281 } else { 282 /* Going up, so change VID first */ 283 change_VID(vid); 284 change_FID(fid); 285 } 286 287 288 if (have_a0 == 1) 289 local_irq_enable(); 290 291 return 0; 292 } 293 294 295 #ifdef CONFIG_X86_POWERNOW_K7_ACPI 296 297 static struct acpi_processor_performance *acpi_processor_perf; 298 299 static int powernow_acpi_init(void) 300 { 301 int i; 302 int retval = 0; 303 union powernow_acpi_control_t pc; 304 305 if (acpi_processor_perf != NULL && powernow_table != NULL) { 306 retval = -EINVAL; 307 goto err0; 308 } 309 310 acpi_processor_perf = kzalloc(sizeof(*acpi_processor_perf), GFP_KERNEL); 311 if (!acpi_processor_perf) { 312 retval = -ENOMEM; 313 goto err0; 314 } 315 316 if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, 317 GFP_KERNEL)) { 318 retval = -ENOMEM; 319 goto err05; 320 } 321 322 if (acpi_processor_register_performance(acpi_processor_perf, 0)) { 323 retval = -EIO; 324 goto err1; 325 } 326 327 if (acpi_processor_perf->control_register.space_id != 328 ACPI_ADR_SPACE_FIXED_HARDWARE) { 329 retval = -ENODEV; 330 goto err2; 331 } 332 333 if (acpi_processor_perf->status_register.space_id != 334 ACPI_ADR_SPACE_FIXED_HARDWARE) { 335 retval = -ENODEV; 336 goto err2; 337 } 338 339 number_scales = acpi_processor_perf->state_count; 340 341 if (number_scales < 2) { 342 retval = -ENODEV; 343 goto err2; 344 } 345 346 powernow_table = kzalloc((sizeof(*powernow_table) * 347 (number_scales + 1)), GFP_KERNEL); 348 if (!powernow_table) { 349 retval = -ENOMEM; 350 goto err2; 351 } 352 353 pc.val = (unsigned long) acpi_processor_perf->states[0].control; 354 for (i = 0; i < number_scales; i++) { 355 u8 fid, vid; 356 struct acpi_processor_px *state = 357 &acpi_processor_perf->states[i]; 358 unsigned int speed, speed_mhz; 359 360 pc.val = (unsigned long) state->control; 361 pr_debug("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", 362 i, 363 (u32) state->core_frequency, 364 (u32) state->power, 365 (u32) state->transition_latency, 366 (u32) state->control, 367 pc.bits.sgtc); 368 369 vid = pc.bits.vid; 370 fid = pc.bits.fid; 371 372 powernow_table[i].frequency = fsb * fid_codes[fid] / 10; 373 powernow_table[i].driver_data = fid; /* lower 8 bits */ 374 powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */ 375 376 speed = powernow_table[i].frequency; 377 speed_mhz = speed / 1000; 378 379 /* processor_perflib will multiply the MHz value by 1000 to 380 * get a KHz value (e.g. 1266000). However, powernow-k7 works 381 * with true KHz values (e.g. 1266768). To ensure that all 382 * powernow frequencies are available, we must ensure that 383 * ACPI doesn't restrict them, so we round up the MHz value 384 * to ensure that perflib's computed KHz value is greater than 385 * or equal to powernow's KHz value. 386 */ 387 if (speed % 1000 > 0) 388 speed_mhz++; 389 390 if ((fid_codes[fid] % 10) == 5) { 391 if (have_a0 == 1) 392 invalidate_entry(i); 393 } 394 395 pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " 396 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, 397 fid_codes[fid] % 10, speed_mhz, vid, 398 mobile_vid_table[vid]/1000, 399 mobile_vid_table[vid]%1000); 400 401 if (state->core_frequency != speed_mhz) { 402 state->core_frequency = speed_mhz; 403 pr_debug(" Corrected ACPI frequency to %d\n", 404 speed_mhz); 405 } 406 407 if (latency < pc.bits.sgtc) 408 latency = pc.bits.sgtc; 409 410 if (speed < minimum_speed) 411 minimum_speed = speed; 412 if (speed > maximum_speed) 413 maximum_speed = speed; 414 } 415 416 powernow_table[i].frequency = CPUFREQ_TABLE_END; 417 powernow_table[i].driver_data = 0; 418 419 /* notify BIOS that we exist */ 420 acpi_processor_notify_smm(THIS_MODULE); 421 422 return 0; 423 424 err2: 425 acpi_processor_unregister_performance(acpi_processor_perf, 0); 426 err1: 427 free_cpumask_var(acpi_processor_perf->shared_cpu_map); 428 err05: 429 kfree(acpi_processor_perf); 430 err0: 431 printk(KERN_WARNING PFX "ACPI perflib can not be used on " 432 "this platform\n"); 433 acpi_processor_perf = NULL; 434 return retval; 435 } 436 #else 437 static int powernow_acpi_init(void) 438 { 439 printk(KERN_INFO PFX "no support for ACPI processor found." 440 " Please recompile your kernel with ACPI processor\n"); 441 return -EINVAL; 442 } 443 #endif 444 445 static void print_pst_entry(struct pst_s *pst, unsigned int j) 446 { 447 pr_debug("PST:%d (@%p)\n", j, pst); 448 pr_debug(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", 449 pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); 450 } 451 452 static int powernow_decode_bios(int maxfid, int startvid) 453 { 454 struct psb_s *psb; 455 struct pst_s *pst; 456 unsigned int i, j; 457 unsigned char *p; 458 unsigned int etuple; 459 unsigned int ret; 460 461 etuple = cpuid_eax(0x80000001); 462 463 for (i = 0xC0000; i < 0xffff0 ; i += 16) { 464 465 p = phys_to_virt(i); 466 467 if (memcmp(p, "AMDK7PNOW!", 10) == 0) { 468 pr_debug("Found PSB header at %p\n", p); 469 psb = (struct psb_s *) p; 470 pr_debug("Table version: 0x%x\n", psb->tableversion); 471 if (psb->tableversion != 0x12) { 472 printk(KERN_INFO PFX "Sorry, only v1.2 tables" 473 " supported right now\n"); 474 return -ENODEV; 475 } 476 477 pr_debug("Flags: 0x%x\n", psb->flags); 478 if ((psb->flags & 1) == 0) 479 pr_debug("Mobile voltage regulator\n"); 480 else 481 pr_debug("Desktop voltage regulator\n"); 482 483 latency = psb->settlingtime; 484 if (latency < 100) { 485 printk(KERN_INFO PFX "BIOS set settling time " 486 "to %d microseconds. " 487 "Should be at least 100. " 488 "Correcting.\n", latency); 489 latency = 100; 490 } 491 pr_debug("Settling Time: %d microseconds.\n", 492 psb->settlingtime); 493 pr_debug("Has %d PST tables. (Only dumping ones " 494 "relevant to this CPU).\n", 495 psb->numpst); 496 497 p += sizeof(*psb); 498 499 pst = (struct pst_s *) p; 500 501 for (j = 0; j < psb->numpst; j++) { 502 pst = (struct pst_s *) p; 503 number_scales = pst->numpstates; 504 505 if ((etuple == pst->cpuid) && 506 check_fsb(pst->fsbspeed) && 507 (maxfid == pst->maxfid) && 508 (startvid == pst->startvid)) { 509 print_pst_entry(pst, j); 510 p = (char *)pst + sizeof(*pst); 511 ret = get_ranges(p); 512 return ret; 513 } else { 514 unsigned int k; 515 p = (char *)pst + sizeof(*pst); 516 for (k = 0; k < number_scales; k++) 517 p += 2; 518 } 519 } 520 printk(KERN_INFO PFX "No PST tables match this cpuid " 521 "(0x%x)\n", etuple); 522 printk(KERN_INFO PFX "This is indicative of a broken " 523 "BIOS.\n"); 524 525 return -EINVAL; 526 } 527 p++; 528 } 529 530 return -ENODEV; 531 } 532 533 534 /* 535 * We use the fact that the bus frequency is somehow 536 * a multiple of 100000/3 khz, then we compute sgtc according 537 * to this multiple. 538 * That way, we match more how AMD thinks all of that work. 539 * We will then get the same kind of behaviour already tested under 540 * the "well-known" other OS. 541 */ 542 static int fixup_sgtc(void) 543 { 544 unsigned int sgtc; 545 unsigned int m; 546 547 m = fsb / 3333; 548 if ((m % 10) >= 5) 549 m += 5; 550 551 m /= 10; 552 553 sgtc = 100 * m * latency; 554 sgtc = sgtc / 3; 555 if (sgtc > 0xfffff) { 556 printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc); 557 sgtc = 0xfffff; 558 } 559 return sgtc; 560 } 561 562 static unsigned int powernow_get(unsigned int cpu) 563 { 564 union msr_fidvidstatus fidvidstatus; 565 unsigned int cfid; 566 567 if (cpu) 568 return 0; 569 rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); 570 cfid = fidvidstatus.bits.CFID; 571 572 return fsb * fid_codes[cfid] / 10; 573 } 574 575 576 static int acer_cpufreq_pst(const struct dmi_system_id *d) 577 { 578 printk(KERN_WARNING PFX 579 "%s laptop with broken PST tables in BIOS detected.\n", 580 d->ident); 581 printk(KERN_WARNING PFX 582 "You need to downgrade to 3A21 (09/09/2002), or try a newer " 583 "BIOS than 3A71 (01/20/2003)\n"); 584 printk(KERN_WARNING PFX 585 "cpufreq scaling has been disabled as a result of this.\n"); 586 return 0; 587 } 588 589 /* 590 * Some Athlon laptops have really fucked PST tables. 591 * A BIOS update is all that can save them. 592 * Mention this, and disable cpufreq. 593 */ 594 static struct dmi_system_id powernow_dmi_table[] = { 595 { 596 .callback = acer_cpufreq_pst, 597 .ident = "Acer Aspire", 598 .matches = { 599 DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"), 600 DMI_MATCH(DMI_BIOS_VERSION, "3A71"), 601 }, 602 }, 603 { } 604 }; 605 606 static int powernow_cpu_init(struct cpufreq_policy *policy) 607 { 608 union msr_fidvidstatus fidvidstatus; 609 int result; 610 611 if (policy->cpu != 0) 612 return -ENODEV; 613 614 rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); 615 616 recalibrate_cpu_khz(); 617 618 fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; 619 if (!fsb) { 620 printk(KERN_WARNING PFX "can not determine bus frequency\n"); 621 return -EINVAL; 622 } 623 pr_debug("FSB: %3dMHz\n", fsb/1000); 624 625 if (dmi_check_system(powernow_dmi_table) || acpi_force) { 626 printk(KERN_INFO PFX "PSB/PST known to be broken. " 627 "Trying ACPI instead\n"); 628 result = powernow_acpi_init(); 629 } else { 630 result = powernow_decode_bios(fidvidstatus.bits.MFID, 631 fidvidstatus.bits.SVID); 632 if (result) { 633 printk(KERN_INFO PFX "Trying ACPI perflib\n"); 634 maximum_speed = 0; 635 minimum_speed = -1; 636 latency = 0; 637 result = powernow_acpi_init(); 638 if (result) { 639 printk(KERN_INFO PFX 640 "ACPI and legacy methods failed\n"); 641 } 642 } else { 643 /* SGTC use the bus clock as timer */ 644 latency = fixup_sgtc(); 645 printk(KERN_INFO PFX "SGTC: %d\n", latency); 646 } 647 } 648 649 if (result) 650 return result; 651 652 printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", 653 minimum_speed/1000, maximum_speed/1000); 654 655 policy->cpuinfo.transition_latency = 656 cpufreq_scale(2000000UL, fsb, latency); 657 658 return cpufreq_table_validate_and_show(policy, powernow_table); 659 } 660 661 static int powernow_cpu_exit(struct cpufreq_policy *policy) 662 { 663 #ifdef CONFIG_X86_POWERNOW_K7_ACPI 664 if (acpi_processor_perf) { 665 acpi_processor_unregister_performance(acpi_processor_perf, 0); 666 free_cpumask_var(acpi_processor_perf->shared_cpu_map); 667 kfree(acpi_processor_perf); 668 } 669 #endif 670 671 kfree(powernow_table); 672 return 0; 673 } 674 675 static struct cpufreq_driver powernow_driver = { 676 .verify = cpufreq_generic_frequency_table_verify, 677 .target_index = powernow_target, 678 .get = powernow_get, 679 #ifdef CONFIG_X86_POWERNOW_K7_ACPI 680 .bios_limit = acpi_processor_get_bios_limit, 681 #endif 682 .init = powernow_cpu_init, 683 .exit = powernow_cpu_exit, 684 .name = "powernow-k7", 685 .attr = cpufreq_generic_attr, 686 }; 687 688 static int __init powernow_init(void) 689 { 690 if (check_powernow() == 0) 691 return -ENODEV; 692 return cpufreq_register_driver(&powernow_driver); 693 } 694 695 696 static void __exit powernow_exit(void) 697 { 698 cpufreq_unregister_driver(&powernow_driver); 699 } 700 701 module_param(acpi_force, int, 0444); 702 MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); 703 704 MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); 705 MODULE_DESCRIPTION("Powernow driver for AMD K7 processors."); 706 MODULE_LICENSE("GPL"); 707 708 late_initcall(powernow_init); 709 module_exit(powernow_exit); 710 711