1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> 4 * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> 5 * 6 * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, 7 * that is iMac G5 and latest single CPU desktop. 8 */ 9 10 #undef DEBUG 11 12 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 13 14 #include <linux/module.h> 15 #include <linux/types.h> 16 #include <linux/errno.h> 17 #include <linux/kernel.h> 18 #include <linux/delay.h> 19 #include <linux/sched.h> 20 #include <linux/cpufreq.h> 21 #include <linux/init.h> 22 #include <linux/completion.h> 23 #include <linux/mutex.h> 24 #include <linux/of_device.h> 25 #include <asm/prom.h> 26 #include <asm/machdep.h> 27 #include <asm/irq.h> 28 #include <asm/sections.h> 29 #include <asm/cputable.h> 30 #include <asm/time.h> 31 #include <asm/smu.h> 32 #include <asm/pmac_pfunc.h> 33 34 #define DBG(fmt...) pr_debug(fmt) 35 36 /* see 970FX user manual */ 37 38 #define SCOM_PCR 0x0aa001 /* PCR scom addr */ 39 40 #define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ 41 #define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ 42 #define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ 43 #define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ 44 #define PCR_SPEED_MASK 0x000e0000U /* speed mask */ 45 #define PCR_SPEED_SHIFT 17 46 #define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ 47 #define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ 48 #define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ 49 #define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ 50 #define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ 51 #define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ 52 53 #define SCOM_PSR 0x408001 /* PSR scom addr */ 54 /* warning: PSR is a 64 bits register */ 55 #define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ 56 #define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ 57 #define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ 58 #define PSR_CUR_SPEED_SHIFT (56) 59 60 /* 61 * The G5 only supports two frequencies (Quarter speed is not supported) 62 */ 63 #define CPUFREQ_HIGH 0 64 #define CPUFREQ_LOW 1 65 66 static struct cpufreq_frequency_table g5_cpu_freqs[] = { 67 {0, CPUFREQ_HIGH, 0}, 68 {0, CPUFREQ_LOW, 0}, 69 {0, 0, CPUFREQ_TABLE_END}, 70 }; 71 72 /* Power mode data is an array of the 32 bits PCR values to use for 73 * the various frequencies, retrieved from the device-tree 74 */ 75 static int g5_pmode_cur; 76 77 static void (*g5_switch_volt)(int speed_mode); 78 static int (*g5_switch_freq)(int speed_mode); 79 static int (*g5_query_freq)(void); 80 81 static unsigned long transition_latency; 82 83 #ifdef CONFIG_PMAC_SMU 84 85 static const u32 *g5_pmode_data; 86 static int g5_pmode_max; 87 88 static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ 89 static int g5_fvt_count; /* number of op. points */ 90 static int g5_fvt_cur; /* current op. point */ 91 92 /* 93 * SMU based voltage switching for Neo2 platforms 94 */ 95 96 static void g5_smu_switch_volt(int speed_mode) 97 { 98 struct smu_simple_cmd cmd; 99 100 DECLARE_COMPLETION_ONSTACK(comp); 101 smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, 102 &comp, 'V', 'S', 'L', 'E', 'W', 103 0xff, g5_fvt_cur+1, speed_mode); 104 wait_for_completion(&comp); 105 } 106 107 /* 108 * Platform function based voltage/vdnap switching for Neo2 109 */ 110 111 static struct pmf_function *pfunc_set_vdnap0; 112 static struct pmf_function *pfunc_vdnap0_complete; 113 114 static void g5_vdnap_switch_volt(int speed_mode) 115 { 116 struct pmf_args args; 117 u32 slew, done = 0; 118 unsigned long timeout; 119 120 slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; 121 args.count = 1; 122 args.u[0].p = &slew; 123 124 pmf_call_one(pfunc_set_vdnap0, &args); 125 126 /* It's an irq GPIO so we should be able to just block here, 127 * I'll do that later after I've properly tested the IRQ code for 128 * platform functions 129 */ 130 timeout = jiffies + HZ/10; 131 while(!time_after(jiffies, timeout)) { 132 args.count = 1; 133 args.u[0].p = &done; 134 pmf_call_one(pfunc_vdnap0_complete, &args); 135 if (done) 136 break; 137 usleep_range(1000, 1000); 138 } 139 if (done == 0) 140 pr_warn("Timeout in clock slewing !\n"); 141 } 142 143 144 /* 145 * SCOM based frequency switching for 970FX rev3 146 */ 147 static int g5_scom_switch_freq(int speed_mode) 148 { 149 unsigned long flags; 150 int to; 151 152 /* If frequency is going up, first ramp up the voltage */ 153 if (speed_mode < g5_pmode_cur) 154 g5_switch_volt(speed_mode); 155 156 local_irq_save(flags); 157 158 /* Clear PCR high */ 159 scom970_write(SCOM_PCR, 0); 160 /* Clear PCR low */ 161 scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); 162 /* Set PCR low */ 163 scom970_write(SCOM_PCR, PCR_HILO_SELECT | 164 g5_pmode_data[speed_mode]); 165 166 /* Wait for completion */ 167 for (to = 0; to < 10; to++) { 168 unsigned long psr = scom970_read(SCOM_PSR); 169 170 if ((psr & PSR_CMD_RECEIVED) == 0 && 171 (((psr >> PSR_CUR_SPEED_SHIFT) ^ 172 (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) 173 == 0) 174 break; 175 if (psr & PSR_CMD_COMPLETED) 176 break; 177 udelay(100); 178 } 179 180 local_irq_restore(flags); 181 182 /* If frequency is going down, last ramp the voltage */ 183 if (speed_mode > g5_pmode_cur) 184 g5_switch_volt(speed_mode); 185 186 g5_pmode_cur = speed_mode; 187 ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; 188 189 return 0; 190 } 191 192 static int g5_scom_query_freq(void) 193 { 194 unsigned long psr = scom970_read(SCOM_PSR); 195 int i; 196 197 for (i = 0; i <= g5_pmode_max; i++) 198 if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ 199 (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) 200 break; 201 return i; 202 } 203 204 /* 205 * Fake voltage switching for platforms with missing support 206 */ 207 208 static void g5_dummy_switch_volt(int speed_mode) 209 { 210 } 211 212 #endif /* CONFIG_PMAC_SMU */ 213 214 /* 215 * Platform function based voltage switching for PowerMac7,2 & 7,3 216 */ 217 218 static struct pmf_function *pfunc_cpu0_volt_high; 219 static struct pmf_function *pfunc_cpu0_volt_low; 220 static struct pmf_function *pfunc_cpu1_volt_high; 221 static struct pmf_function *pfunc_cpu1_volt_low; 222 223 static void g5_pfunc_switch_volt(int speed_mode) 224 { 225 if (speed_mode == CPUFREQ_HIGH) { 226 if (pfunc_cpu0_volt_high) 227 pmf_call_one(pfunc_cpu0_volt_high, NULL); 228 if (pfunc_cpu1_volt_high) 229 pmf_call_one(pfunc_cpu1_volt_high, NULL); 230 } else { 231 if (pfunc_cpu0_volt_low) 232 pmf_call_one(pfunc_cpu0_volt_low, NULL); 233 if (pfunc_cpu1_volt_low) 234 pmf_call_one(pfunc_cpu1_volt_low, NULL); 235 } 236 usleep_range(10000, 10000); /* should be faster , to fix */ 237 } 238 239 /* 240 * Platform function based frequency switching for PowerMac7,2 & 7,3 241 */ 242 243 static struct pmf_function *pfunc_cpu_setfreq_high; 244 static struct pmf_function *pfunc_cpu_setfreq_low; 245 static struct pmf_function *pfunc_cpu_getfreq; 246 static struct pmf_function *pfunc_slewing_done; 247 248 static int g5_pfunc_switch_freq(int speed_mode) 249 { 250 struct pmf_args args; 251 u32 done = 0; 252 unsigned long timeout; 253 int rc; 254 255 DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); 256 257 /* If frequency is going up, first ramp up the voltage */ 258 if (speed_mode < g5_pmode_cur) 259 g5_switch_volt(speed_mode); 260 261 /* Do it */ 262 if (speed_mode == CPUFREQ_HIGH) 263 rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); 264 else 265 rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); 266 267 if (rc) 268 pr_warn("pfunc switch error %d\n", rc); 269 270 /* It's an irq GPIO so we should be able to just block here, 271 * I'll do that later after I've properly tested the IRQ code for 272 * platform functions 273 */ 274 timeout = jiffies + HZ/10; 275 while(!time_after(jiffies, timeout)) { 276 args.count = 1; 277 args.u[0].p = &done; 278 pmf_call_one(pfunc_slewing_done, &args); 279 if (done) 280 break; 281 usleep_range(500, 500); 282 } 283 if (done == 0) 284 pr_warn("Timeout in clock slewing !\n"); 285 286 /* If frequency is going down, last ramp the voltage */ 287 if (speed_mode > g5_pmode_cur) 288 g5_switch_volt(speed_mode); 289 290 g5_pmode_cur = speed_mode; 291 ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; 292 293 return 0; 294 } 295 296 static int g5_pfunc_query_freq(void) 297 { 298 struct pmf_args args; 299 u32 val = 0; 300 301 args.count = 1; 302 args.u[0].p = &val; 303 pmf_call_one(pfunc_cpu_getfreq, &args); 304 return val ? CPUFREQ_HIGH : CPUFREQ_LOW; 305 } 306 307 308 /* 309 * Common interface to the cpufreq core 310 */ 311 312 static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int index) 313 { 314 return g5_switch_freq(index); 315 } 316 317 static unsigned int g5_cpufreq_get_speed(unsigned int cpu) 318 { 319 return g5_cpu_freqs[g5_pmode_cur].frequency; 320 } 321 322 static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) 323 { 324 cpufreq_generic_init(policy, g5_cpu_freqs, transition_latency); 325 return 0; 326 } 327 328 static struct cpufreq_driver g5_cpufreq_driver = { 329 .name = "powermac", 330 .flags = CPUFREQ_CONST_LOOPS, 331 .init = g5_cpufreq_cpu_init, 332 .verify = cpufreq_generic_frequency_table_verify, 333 .target_index = g5_cpufreq_target, 334 .get = g5_cpufreq_get_speed, 335 .attr = cpufreq_generic_attr, 336 }; 337 338 339 #ifdef CONFIG_PMAC_SMU 340 341 static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) 342 { 343 unsigned int psize, ssize; 344 unsigned long max_freq; 345 char *freq_method, *volt_method; 346 const u32 *valp; 347 u32 pvr_hi; 348 int use_volts_vdnap = 0; 349 int use_volts_smu = 0; 350 int rc = -ENODEV; 351 352 /* Check supported platforms */ 353 if (of_machine_is_compatible("PowerMac8,1") || 354 of_machine_is_compatible("PowerMac8,2") || 355 of_machine_is_compatible("PowerMac9,1") || 356 of_machine_is_compatible("PowerMac12,1")) 357 use_volts_smu = 1; 358 else if (of_machine_is_compatible("PowerMac11,2")) 359 use_volts_vdnap = 1; 360 else 361 return -ENODEV; 362 363 /* Check 970FX for now */ 364 valp = of_get_property(cpunode, "cpu-version", NULL); 365 if (!valp) { 366 DBG("No cpu-version property !\n"); 367 goto bail_noprops; 368 } 369 pvr_hi = (*valp) >> 16; 370 if (pvr_hi != 0x3c && pvr_hi != 0x44) { 371 pr_err("Unsupported CPU version\n"); 372 goto bail_noprops; 373 } 374 375 /* Look for the powertune data in the device-tree */ 376 g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); 377 if (!g5_pmode_data) { 378 DBG("No power-mode-data !\n"); 379 goto bail_noprops; 380 } 381 g5_pmode_max = psize / sizeof(u32) - 1; 382 383 if (use_volts_smu) { 384 const struct smu_sdbp_header *shdr; 385 386 /* Look for the FVT table */ 387 shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); 388 if (!shdr) 389 goto bail_noprops; 390 g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; 391 ssize = (shdr->len * sizeof(u32)) - sizeof(*shdr); 392 g5_fvt_count = ssize / sizeof(*g5_fvt_table); 393 g5_fvt_cur = 0; 394 395 /* Sanity checking */ 396 if (g5_fvt_count < 1 || g5_pmode_max < 1) 397 goto bail_noprops; 398 399 g5_switch_volt = g5_smu_switch_volt; 400 volt_method = "SMU"; 401 } else if (use_volts_vdnap) { 402 struct device_node *root; 403 404 root = of_find_node_by_path("/"); 405 if (root == NULL) { 406 pr_err("Can't find root of device tree\n"); 407 goto bail_noprops; 408 } 409 pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); 410 pfunc_vdnap0_complete = 411 pmf_find_function(root, "slewing-done"); 412 of_node_put(root); 413 if (pfunc_set_vdnap0 == NULL || 414 pfunc_vdnap0_complete == NULL) { 415 pr_err("Can't find required platform function\n"); 416 goto bail_noprops; 417 } 418 419 g5_switch_volt = g5_vdnap_switch_volt; 420 volt_method = "GPIO"; 421 } else { 422 g5_switch_volt = g5_dummy_switch_volt; 423 volt_method = "none"; 424 } 425 426 /* 427 * From what I see, clock-frequency is always the maximal frequency. 428 * The current driver can not slew sysclk yet, so we really only deal 429 * with powertune steps for now. We also only implement full freq and 430 * half freq in this version. So far, I haven't yet seen a machine 431 * supporting anything else. 432 */ 433 valp = of_get_property(cpunode, "clock-frequency", NULL); 434 if (!valp) 435 return -ENODEV; 436 max_freq = (*valp)/1000; 437 g5_cpu_freqs[0].frequency = max_freq; 438 g5_cpu_freqs[1].frequency = max_freq/2; 439 440 /* Set callbacks */ 441 transition_latency = 12000; 442 g5_switch_freq = g5_scom_switch_freq; 443 g5_query_freq = g5_scom_query_freq; 444 freq_method = "SCOM"; 445 446 /* Force apply current frequency to make sure everything is in 447 * sync (voltage is right for example). Firmware may leave us with 448 * a strange setting ... 449 */ 450 g5_switch_volt(CPUFREQ_HIGH); 451 msleep(10); 452 g5_pmode_cur = -1; 453 g5_switch_freq(g5_query_freq()); 454 455 pr_info("Registering G5 CPU frequency driver\n"); 456 pr_info("Frequency method: %s, Voltage method: %s\n", 457 freq_method, volt_method); 458 pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", 459 g5_cpu_freqs[1].frequency/1000, 460 g5_cpu_freqs[0].frequency/1000, 461 g5_cpu_freqs[g5_pmode_cur].frequency/1000); 462 463 rc = cpufreq_register_driver(&g5_cpufreq_driver); 464 465 /* We keep the CPU node on hold... hopefully, Apple G5 don't have 466 * hotplug CPU with a dynamic device-tree ... 467 */ 468 return rc; 469 470 bail_noprops: 471 of_node_put(cpunode); 472 473 return rc; 474 } 475 476 #endif /* CONFIG_PMAC_SMU */ 477 478 479 static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) 480 { 481 struct device_node *cpuid = NULL, *hwclock = NULL; 482 const u8 *eeprom = NULL; 483 const u32 *valp; 484 u64 max_freq, min_freq, ih, il; 485 int has_volt = 1, rc = 0; 486 487 DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" 488 " RackMac3,1...\n"); 489 490 /* Lookup the cpuid eeprom node */ 491 cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); 492 if (cpuid != NULL) 493 eeprom = of_get_property(cpuid, "cpuid", NULL); 494 if (eeprom == NULL) { 495 pr_err("Can't find cpuid EEPROM !\n"); 496 rc = -ENODEV; 497 goto bail; 498 } 499 500 /* Lookup the i2c hwclock */ 501 for_each_node_by_name(hwclock, "i2c-hwclock") { 502 const char *loc = of_get_property(hwclock, 503 "hwctrl-location", NULL); 504 if (loc == NULL) 505 continue; 506 if (strcmp(loc, "CPU CLOCK")) 507 continue; 508 if (!of_get_property(hwclock, "platform-get-frequency", NULL)) 509 continue; 510 break; 511 } 512 if (hwclock == NULL) { 513 pr_err("Can't find i2c clock chip !\n"); 514 rc = -ENODEV; 515 goto bail; 516 } 517 518 DBG("cpufreq: i2c clock chip found: %pOF\n", hwclock); 519 520 /* Now get all the platform functions */ 521 pfunc_cpu_getfreq = 522 pmf_find_function(hwclock, "get-frequency"); 523 pfunc_cpu_setfreq_high = 524 pmf_find_function(hwclock, "set-frequency-high"); 525 pfunc_cpu_setfreq_low = 526 pmf_find_function(hwclock, "set-frequency-low"); 527 pfunc_slewing_done = 528 pmf_find_function(hwclock, "slewing-done"); 529 pfunc_cpu0_volt_high = 530 pmf_find_function(hwclock, "set-voltage-high-0"); 531 pfunc_cpu0_volt_low = 532 pmf_find_function(hwclock, "set-voltage-low-0"); 533 pfunc_cpu1_volt_high = 534 pmf_find_function(hwclock, "set-voltage-high-1"); 535 pfunc_cpu1_volt_low = 536 pmf_find_function(hwclock, "set-voltage-low-1"); 537 538 /* Check we have minimum requirements */ 539 if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || 540 pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { 541 pr_err("Can't find platform functions !\n"); 542 rc = -ENODEV; 543 goto bail; 544 } 545 546 /* Check that we have complete sets */ 547 if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { 548 pmf_put_function(pfunc_cpu0_volt_high); 549 pmf_put_function(pfunc_cpu0_volt_low); 550 pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; 551 has_volt = 0; 552 } 553 if (!has_volt || 554 pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { 555 pmf_put_function(pfunc_cpu1_volt_high); 556 pmf_put_function(pfunc_cpu1_volt_low); 557 pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; 558 } 559 560 /* Note: The device tree also contains a "platform-set-values" 561 * function for which I haven't quite figured out the usage. It 562 * might have to be called on init and/or wakeup, I'm not too sure 563 * but things seem to work fine without it so far ... 564 */ 565 566 /* Get max frequency from device-tree */ 567 valp = of_get_property(cpunode, "clock-frequency", NULL); 568 if (!valp) { 569 pr_err("Can't find CPU frequency !\n"); 570 rc = -ENODEV; 571 goto bail; 572 } 573 574 max_freq = (*valp)/1000; 575 576 /* Now calculate reduced frequency by using the cpuid input freq 577 * ratio. This requires 64 bits math unless we are willing to lose 578 * some precision 579 */ 580 ih = *((u32 *)(eeprom + 0x10)); 581 il = *((u32 *)(eeprom + 0x20)); 582 583 /* Check for machines with no useful settings */ 584 if (il == ih) { 585 pr_warn("No low frequency mode available on this model !\n"); 586 rc = -ENODEV; 587 goto bail; 588 } 589 590 min_freq = 0; 591 if (ih != 0 && il != 0) 592 min_freq = (max_freq * il) / ih; 593 594 /* Sanity check */ 595 if (min_freq >= max_freq || min_freq < 1000) { 596 pr_err("Can't calculate low frequency !\n"); 597 rc = -ENXIO; 598 goto bail; 599 } 600 g5_cpu_freqs[0].frequency = max_freq; 601 g5_cpu_freqs[1].frequency = min_freq; 602 603 /* Based on a measurement on Xserve G5, rounded up. */ 604 transition_latency = 10 * NSEC_PER_MSEC; 605 606 /* Set callbacks */ 607 g5_switch_volt = g5_pfunc_switch_volt; 608 g5_switch_freq = g5_pfunc_switch_freq; 609 g5_query_freq = g5_pfunc_query_freq; 610 611 /* Force apply current frequency to make sure everything is in 612 * sync (voltage is right for example). Firmware may leave us with 613 * a strange setting ... 614 */ 615 g5_switch_volt(CPUFREQ_HIGH); 616 msleep(10); 617 g5_pmode_cur = -1; 618 g5_switch_freq(g5_query_freq()); 619 620 pr_info("Registering G5 CPU frequency driver\n"); 621 pr_info("Frequency method: i2c/pfunc, Voltage method: %s\n", 622 has_volt ? "i2c/pfunc" : "none"); 623 pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", 624 g5_cpu_freqs[1].frequency/1000, 625 g5_cpu_freqs[0].frequency/1000, 626 g5_cpu_freqs[g5_pmode_cur].frequency/1000); 627 628 rc = cpufreq_register_driver(&g5_cpufreq_driver); 629 bail: 630 if (rc != 0) { 631 pmf_put_function(pfunc_cpu_getfreq); 632 pmf_put_function(pfunc_cpu_setfreq_high); 633 pmf_put_function(pfunc_cpu_setfreq_low); 634 pmf_put_function(pfunc_slewing_done); 635 pmf_put_function(pfunc_cpu0_volt_high); 636 pmf_put_function(pfunc_cpu0_volt_low); 637 pmf_put_function(pfunc_cpu1_volt_high); 638 pmf_put_function(pfunc_cpu1_volt_low); 639 } 640 of_node_put(hwclock); 641 of_node_put(cpuid); 642 of_node_put(cpunode); 643 644 return rc; 645 } 646 647 static int __init g5_cpufreq_init(void) 648 { 649 struct device_node *cpunode; 650 int rc = 0; 651 652 /* Get first CPU node */ 653 cpunode = of_cpu_device_node_get(0); 654 if (cpunode == NULL) { 655 pr_err("Can't find any CPU node\n"); 656 return -ENODEV; 657 } 658 659 if (of_machine_is_compatible("PowerMac7,2") || 660 of_machine_is_compatible("PowerMac7,3") || 661 of_machine_is_compatible("RackMac3,1")) 662 rc = g5_pm72_cpufreq_init(cpunode); 663 #ifdef CONFIG_PMAC_SMU 664 else 665 rc = g5_neo2_cpufreq_init(cpunode); 666 #endif /* CONFIG_PMAC_SMU */ 667 668 return rc; 669 } 670 671 module_init(g5_cpufreq_init); 672 673 674 MODULE_LICENSE("GPL"); 675