1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> 4 * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> 5 * 6 * TODO: Need a big cleanup here. Basically, we need to have different 7 * cpufreq_driver structures for the different type of HW instead of the 8 * current mess. We also need to better deal with the detection of the 9 * type of machine. 10 */ 11 12 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 13 14 #include <linux/module.h> 15 #include <linux/types.h> 16 #include <linux/errno.h> 17 #include <linux/kernel.h> 18 #include <linux/delay.h> 19 #include <linux/sched.h> 20 #include <linux/adb.h> 21 #include <linux/pmu.h> 22 #include <linux/cpufreq.h> 23 #include <linux/init.h> 24 #include <linux/device.h> 25 #include <linux/hardirq.h> 26 #include <linux/of.h> 27 #include <linux/of_address.h> 28 29 #include <asm/machdep.h> 30 #include <asm/irq.h> 31 #include <asm/pmac_feature.h> 32 #include <asm/mmu_context.h> 33 #include <asm/sections.h> 34 #include <asm/cputable.h> 35 #include <asm/time.h> 36 #include <asm/mpic.h> 37 #include <asm/keylargo.h> 38 #include <asm/switch_to.h> 39 40 /* WARNING !!! This will cause calibrate_delay() to be called, 41 * but this is an __init function ! So you MUST go edit 42 * init/main.c to make it non-init before enabling DEBUG_FREQ 43 */ 44 #undef DEBUG_FREQ 45 46 extern void low_choose_7447a_dfs(int dfs); 47 extern void low_choose_750fx_pll(int pll); 48 extern void low_sleep_handler(void); 49 50 /* 51 * Currently, PowerMac cpufreq supports only high & low frequencies 52 * that are set by the firmware 53 */ 54 static unsigned int low_freq; 55 static unsigned int hi_freq; 56 static unsigned int cur_freq; 57 static unsigned int sleep_freq; 58 static unsigned long transition_latency; 59 60 /* 61 * Different models uses different mechanisms to switch the frequency 62 */ 63 static int (*set_speed_proc)(int low_speed); 64 static unsigned int (*get_speed_proc)(void); 65 66 /* 67 * Some definitions used by the various speedprocs 68 */ 69 static u32 voltage_gpio; 70 static u32 frequency_gpio; 71 static u32 slew_done_gpio; 72 static int no_schedule; 73 static int has_cpu_l2lve; 74 static int is_pmu_based; 75 76 /* There are only two frequency states for each processor. Values 77 * are in kHz for the time being. 78 */ 79 #define CPUFREQ_HIGH 0 80 #define CPUFREQ_LOW 1 81 82 static struct cpufreq_frequency_table pmac_cpu_freqs[] = { 83 {0, CPUFREQ_HIGH, 0}, 84 {0, CPUFREQ_LOW, 0}, 85 {0, 0, CPUFREQ_TABLE_END}, 86 }; 87 88 static inline void local_delay(unsigned long ms) 89 { 90 if (no_schedule) 91 mdelay(ms); 92 else 93 msleep(ms); 94 } 95 96 #ifdef DEBUG_FREQ 97 static inline void debug_calc_bogomips(void) 98 { 99 /* This will cause a recalc of bogomips and display the 100 * result. We backup/restore the value to avoid affecting the 101 * core cpufreq framework's own calculation. 102 */ 103 unsigned long save_lpj = loops_per_jiffy; 104 calibrate_delay(); 105 loops_per_jiffy = save_lpj; 106 } 107 #endif /* DEBUG_FREQ */ 108 109 /* Switch CPU speed under 750FX CPU control 110 */ 111 static int cpu_750fx_cpu_speed(int low_speed) 112 { 113 u32 hid2; 114 115 if (low_speed == 0) { 116 /* ramping up, set voltage first */ 117 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); 118 /* Make sure we sleep for at least 1ms */ 119 local_delay(10); 120 121 /* tweak L2 for high voltage */ 122 if (has_cpu_l2lve) { 123 hid2 = mfspr(SPRN_HID2); 124 hid2 &= ~0x2000; 125 mtspr(SPRN_HID2, hid2); 126 } 127 } 128 #ifdef CONFIG_PPC_BOOK3S_32 129 low_choose_750fx_pll(low_speed); 130 #endif 131 if (low_speed == 1) { 132 /* tweak L2 for low voltage */ 133 if (has_cpu_l2lve) { 134 hid2 = mfspr(SPRN_HID2); 135 hid2 |= 0x2000; 136 mtspr(SPRN_HID2, hid2); 137 } 138 139 /* ramping down, set voltage last */ 140 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); 141 local_delay(10); 142 } 143 144 return 0; 145 } 146 147 static unsigned int cpu_750fx_get_cpu_speed(void) 148 { 149 if (mfspr(SPRN_HID1) & HID1_PS) 150 return low_freq; 151 else 152 return hi_freq; 153 } 154 155 /* Switch CPU speed using DFS */ 156 static int dfs_set_cpu_speed(int low_speed) 157 { 158 if (low_speed == 0) { 159 /* ramping up, set voltage first */ 160 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); 161 /* Make sure we sleep for at least 1ms */ 162 local_delay(1); 163 } 164 165 /* set frequency */ 166 #ifdef CONFIG_PPC_BOOK3S_32 167 low_choose_7447a_dfs(low_speed); 168 #endif 169 udelay(100); 170 171 if (low_speed == 1) { 172 /* ramping down, set voltage last */ 173 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); 174 local_delay(1); 175 } 176 177 return 0; 178 } 179 180 static unsigned int dfs_get_cpu_speed(void) 181 { 182 if (mfspr(SPRN_HID1) & HID1_DFS) 183 return low_freq; 184 else 185 return hi_freq; 186 } 187 188 189 /* Switch CPU speed using slewing GPIOs 190 */ 191 static int gpios_set_cpu_speed(int low_speed) 192 { 193 int gpio, timeout = 0; 194 195 /* If ramping up, set voltage first */ 196 if (low_speed == 0) { 197 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); 198 /* Delay is way too big but it's ok, we schedule */ 199 local_delay(10); 200 } 201 202 /* Set frequency */ 203 gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); 204 if (low_speed == ((gpio & 0x01) == 0)) 205 goto skip; 206 207 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, 208 low_speed ? 0x04 : 0x05); 209 udelay(200); 210 do { 211 if (++timeout > 100) 212 break; 213 local_delay(1); 214 gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); 215 } while((gpio & 0x02) == 0); 216 skip: 217 /* If ramping down, set voltage last */ 218 if (low_speed == 1) { 219 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); 220 /* Delay is way too big but it's ok, we schedule */ 221 local_delay(10); 222 } 223 224 #ifdef DEBUG_FREQ 225 debug_calc_bogomips(); 226 #endif 227 228 return 0; 229 } 230 231 /* Switch CPU speed under PMU control 232 */ 233 static int pmu_set_cpu_speed(int low_speed) 234 { 235 struct adb_request req; 236 unsigned long save_l2cr; 237 unsigned long save_l3cr; 238 unsigned int pic_prio; 239 unsigned long flags; 240 241 preempt_disable(); 242 243 #ifdef DEBUG_FREQ 244 printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); 245 #endif 246 pmu_suspend(); 247 248 /* Disable all interrupt sources on openpic */ 249 pic_prio = mpic_cpu_get_priority(); 250 mpic_cpu_set_priority(0xf); 251 252 /* Make sure the decrementer won't interrupt us */ 253 asm volatile("mtdec %0" : : "r" (0x7fffffff)); 254 /* Make sure any pending DEC interrupt occurring while we did 255 * the above didn't re-enable the DEC */ 256 mb(); 257 asm volatile("mtdec %0" : : "r" (0x7fffffff)); 258 259 /* We can now disable MSR_EE */ 260 local_irq_save(flags); 261 262 /* Giveup the FPU & vec */ 263 enable_kernel_fp(); 264 265 #ifdef CONFIG_ALTIVEC 266 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 267 enable_kernel_altivec(); 268 #endif /* CONFIG_ALTIVEC */ 269 270 /* Save & disable L2 and L3 caches */ 271 save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ 272 save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ 273 274 /* Send the new speed command. My assumption is that this command 275 * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep 276 */ 277 pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); 278 while (!req.complete) 279 pmu_poll(); 280 281 /* Prepare the northbridge for the speed transition */ 282 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); 283 284 /* Call low level code to backup CPU state and recover from 285 * hardware reset 286 */ 287 low_sleep_handler(); 288 289 /* Restore the northbridge */ 290 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); 291 292 /* Restore L2 cache */ 293 if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) 294 _set_L2CR(save_l2cr); 295 /* Restore L3 cache */ 296 if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) 297 _set_L3CR(save_l3cr); 298 299 /* Restore userland MMU context */ 300 switch_mmu_context(NULL, current->active_mm, NULL); 301 302 #ifdef DEBUG_FREQ 303 printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); 304 #endif 305 306 /* Restore low level PMU operations */ 307 pmu_unlock(); 308 309 /* 310 * Restore decrementer; we'll take a decrementer interrupt 311 * as soon as interrupts are re-enabled and the generic 312 * clockevents code will reprogram it with the right value. 313 */ 314 set_dec(1); 315 316 /* Restore interrupts */ 317 mpic_cpu_set_priority(pic_prio); 318 319 /* Let interrupts flow again ... */ 320 local_irq_restore(flags); 321 322 #ifdef DEBUG_FREQ 323 debug_calc_bogomips(); 324 #endif 325 326 pmu_resume(); 327 328 preempt_enable(); 329 330 return 0; 331 } 332 333 static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode) 334 { 335 unsigned long l3cr; 336 static unsigned long prev_l3cr; 337 338 if (speed_mode == CPUFREQ_LOW && 339 cpu_has_feature(CPU_FTR_L3CR)) { 340 l3cr = _get_L3CR(); 341 if (l3cr & L3CR_L3E) { 342 prev_l3cr = l3cr; 343 _set_L3CR(0); 344 } 345 } 346 set_speed_proc(speed_mode == CPUFREQ_LOW); 347 if (speed_mode == CPUFREQ_HIGH && 348 cpu_has_feature(CPU_FTR_L3CR)) { 349 l3cr = _get_L3CR(); 350 if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) 351 _set_L3CR(prev_l3cr); 352 } 353 cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; 354 355 return 0; 356 } 357 358 static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) 359 { 360 return cur_freq; 361 } 362 363 static int pmac_cpufreq_target( struct cpufreq_policy *policy, 364 unsigned int index) 365 { 366 int rc; 367 368 rc = do_set_cpu_speed(policy, index); 369 370 ppc_proc_freq = cur_freq * 1000ul; 371 return rc; 372 } 373 374 static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) 375 { 376 cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency); 377 return 0; 378 } 379 380 static u32 read_gpio(struct device_node *np) 381 { 382 u64 offset; 383 384 if (of_property_read_reg(np, 0, &offset, NULL) < 0) 385 return 0; 386 /* That works for all keylargos but shall be fixed properly 387 * some day... The problem is that it seems we can't rely 388 * on the "reg" property of the GPIO nodes, they are either 389 * relative to the base of KeyLargo or to the base of the 390 * GPIO space, and the device-tree doesn't help. 391 */ 392 if (offset < KEYLARGO_GPIO_LEVELS0) 393 offset += KEYLARGO_GPIO_LEVELS0; 394 return offset; 395 } 396 397 static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) 398 { 399 /* Ok, this could be made a bit smarter, but let's be robust for now. We 400 * always force a speed change to high speed before sleep, to make sure 401 * we have appropriate voltage and/or bus speed for the wakeup process, 402 * and to make sure our loops_per_jiffies are "good enough", that is will 403 * not cause too short delays if we sleep in low speed and wake in high 404 * speed.. 405 */ 406 no_schedule = 1; 407 sleep_freq = cur_freq; 408 if (cur_freq == low_freq && !is_pmu_based) 409 do_set_cpu_speed(policy, CPUFREQ_HIGH); 410 return 0; 411 } 412 413 static int pmac_cpufreq_resume(struct cpufreq_policy *policy) 414 { 415 /* If we resume, first check if we have a get() function */ 416 if (get_speed_proc) 417 cur_freq = get_speed_proc(); 418 else 419 cur_freq = 0; 420 421 /* We don't, hrm... we don't really know our speed here, best 422 * is that we force a switch to whatever it was, which is 423 * probably high speed due to our suspend() routine 424 */ 425 do_set_cpu_speed(policy, sleep_freq == low_freq ? 426 CPUFREQ_LOW : CPUFREQ_HIGH); 427 428 ppc_proc_freq = cur_freq * 1000ul; 429 430 no_schedule = 0; 431 return 0; 432 } 433 434 static struct cpufreq_driver pmac_cpufreq_driver = { 435 .verify = cpufreq_generic_frequency_table_verify, 436 .target_index = pmac_cpufreq_target, 437 .get = pmac_cpufreq_get_speed, 438 .init = pmac_cpufreq_cpu_init, 439 .suspend = pmac_cpufreq_suspend, 440 .resume = pmac_cpufreq_resume, 441 .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, 442 .attr = cpufreq_generic_attr, 443 .name = "powermac", 444 }; 445 446 447 static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) 448 { 449 struct device_node *volt_gpio_np = of_find_node_by_name(NULL, 450 "voltage-gpio"); 451 struct device_node *freq_gpio_np = of_find_node_by_name(NULL, 452 "frequency-gpio"); 453 struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, 454 "slewing-done"); 455 const u32 *value; 456 457 /* 458 * Check to see if it's GPIO driven or PMU only 459 * 460 * The way we extract the GPIO address is slightly hackish, but it 461 * works well enough for now. We need to abstract the whole GPIO 462 * stuff sooner or later anyway 463 */ 464 465 if (volt_gpio_np) 466 voltage_gpio = read_gpio(volt_gpio_np); 467 if (freq_gpio_np) 468 frequency_gpio = read_gpio(freq_gpio_np); 469 if (slew_done_gpio_np) 470 slew_done_gpio = read_gpio(slew_done_gpio_np); 471 472 of_node_put(volt_gpio_np); 473 of_node_put(freq_gpio_np); 474 of_node_put(slew_done_gpio_np); 475 476 /* If we use the frequency GPIOs, calculate the min/max speeds based 477 * on the bus frequencies 478 */ 479 if (frequency_gpio && slew_done_gpio) { 480 int lenp, rc; 481 const u32 *freqs, *ratio; 482 483 freqs = of_get_property(cpunode, "bus-frequencies", &lenp); 484 lenp /= sizeof(u32); 485 if (freqs == NULL || lenp != 2) { 486 pr_err("bus-frequencies incorrect or missing\n"); 487 return 1; 488 } 489 ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", 490 NULL); 491 if (ratio == NULL) { 492 pr_err("processor-to-bus-ratio*2 missing\n"); 493 return 1; 494 } 495 496 /* Get the min/max bus frequencies */ 497 low_freq = min(freqs[0], freqs[1]); 498 hi_freq = max(freqs[0], freqs[1]); 499 500 /* Grrrr.. It _seems_ that the device-tree is lying on the low bus 501 * frequency, it claims it to be around 84Mhz on some models while 502 * it appears to be approx. 101Mhz on all. Let's hack around here... 503 * fortunately, we don't need to be too precise 504 */ 505 if (low_freq < 98000000) 506 low_freq = 101000000; 507 508 /* Convert those to CPU core clocks */ 509 low_freq = (low_freq * (*ratio)) / 2000; 510 hi_freq = (hi_freq * (*ratio)) / 2000; 511 512 /* Now we get the frequencies, we read the GPIO to see what is out current 513 * speed 514 */ 515 rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); 516 cur_freq = (rc & 0x01) ? hi_freq : low_freq; 517 518 set_speed_proc = gpios_set_cpu_speed; 519 return 1; 520 } 521 522 /* If we use the PMU, look for the min & max frequencies in the 523 * device-tree 524 */ 525 value = of_get_property(cpunode, "min-clock-frequency", NULL); 526 if (!value) 527 return 1; 528 low_freq = (*value) / 1000; 529 /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree 530 * here */ 531 if (low_freq < 100000) 532 low_freq *= 10; 533 534 value = of_get_property(cpunode, "max-clock-frequency", NULL); 535 if (!value) 536 return 1; 537 hi_freq = (*value) / 1000; 538 set_speed_proc = pmu_set_cpu_speed; 539 is_pmu_based = 1; 540 541 return 0; 542 } 543 544 static int pmac_cpufreq_init_7447A(struct device_node *cpunode) 545 { 546 struct device_node *volt_gpio_np; 547 548 if (!of_property_read_bool(cpunode, "dynamic-power-step")) 549 return 1; 550 551 volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); 552 if (volt_gpio_np) 553 voltage_gpio = read_gpio(volt_gpio_np); 554 of_node_put(volt_gpio_np); 555 if (!voltage_gpio){ 556 pr_err("missing cpu-vcore-select gpio\n"); 557 return 1; 558 } 559 560 /* OF only reports the high frequency */ 561 hi_freq = cur_freq; 562 low_freq = cur_freq/2; 563 564 /* Read actual frequency from CPU */ 565 cur_freq = dfs_get_cpu_speed(); 566 set_speed_proc = dfs_set_cpu_speed; 567 get_speed_proc = dfs_get_cpu_speed; 568 569 return 0; 570 } 571 572 static int pmac_cpufreq_init_750FX(struct device_node *cpunode) 573 { 574 struct device_node *volt_gpio_np; 575 u32 pvr; 576 const u32 *value; 577 578 if (!of_property_read_bool(cpunode, "dynamic-power-step")) 579 return 1; 580 581 hi_freq = cur_freq; 582 value = of_get_property(cpunode, "reduced-clock-frequency", NULL); 583 if (!value) 584 return 1; 585 low_freq = (*value) / 1000; 586 587 volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); 588 if (volt_gpio_np) 589 voltage_gpio = read_gpio(volt_gpio_np); 590 591 of_node_put(volt_gpio_np); 592 pvr = mfspr(SPRN_PVR); 593 has_cpu_l2lve = !((pvr & 0xf00) == 0x100); 594 595 set_speed_proc = cpu_750fx_cpu_speed; 596 get_speed_proc = cpu_750fx_get_cpu_speed; 597 cur_freq = cpu_750fx_get_cpu_speed(); 598 599 return 0; 600 } 601 602 /* Currently, we support the following machines: 603 * 604 * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) 605 * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) 606 * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) 607 * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) 608 * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) 609 * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) 610 * - Recent MacRISC3 laptops 611 * - All new machines with 7447A CPUs 612 */ 613 static int __init pmac_cpufreq_setup(void) 614 { 615 struct device_node *cpunode; 616 const u32 *value; 617 618 if (strstr(boot_command_line, "nocpufreq")) 619 return 0; 620 621 /* Get first CPU node */ 622 cpunode = of_cpu_device_node_get(0); 623 if (!cpunode) 624 goto out; 625 626 /* Get current cpu clock freq */ 627 value = of_get_property(cpunode, "clock-frequency", NULL); 628 if (!value) 629 goto out; 630 cur_freq = (*value) / 1000; 631 632 /* Check for 7447A based MacRISC3 */ 633 if (of_machine_is_compatible("MacRISC3") && 634 of_property_read_bool(cpunode, "dynamic-power-step") && 635 PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { 636 pmac_cpufreq_init_7447A(cpunode); 637 638 /* Allow dynamic switching */ 639 transition_latency = 8000000; 640 pmac_cpufreq_driver.flags &= ~CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING; 641 /* Check for other MacRISC3 machines */ 642 } else if (of_machine_is_compatible("PowerBook3,4") || 643 of_machine_is_compatible("PowerBook3,5") || 644 of_machine_is_compatible("MacRISC3")) { 645 pmac_cpufreq_init_MacRISC3(cpunode); 646 /* Else check for iBook2 500/600 */ 647 } else if (of_machine_is_compatible("PowerBook4,1")) { 648 hi_freq = cur_freq; 649 low_freq = 400000; 650 set_speed_proc = pmu_set_cpu_speed; 651 is_pmu_based = 1; 652 } 653 /* Else check for TiPb 550 */ 654 else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { 655 hi_freq = cur_freq; 656 low_freq = 500000; 657 set_speed_proc = pmu_set_cpu_speed; 658 is_pmu_based = 1; 659 } 660 /* Else check for TiPb 400 & 500 */ 661 else if (of_machine_is_compatible("PowerBook3,2")) { 662 /* We only know about the 400 MHz and the 500Mhz model 663 * they both have 300 MHz as low frequency 664 */ 665 if (cur_freq < 350000 || cur_freq > 550000) 666 goto out; 667 hi_freq = cur_freq; 668 low_freq = 300000; 669 set_speed_proc = pmu_set_cpu_speed; 670 is_pmu_based = 1; 671 } 672 /* Else check for 750FX */ 673 else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) 674 pmac_cpufreq_init_750FX(cpunode); 675 out: 676 of_node_put(cpunode); 677 if (set_speed_proc == NULL) 678 return -ENODEV; 679 680 pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; 681 pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; 682 ppc_proc_freq = cur_freq * 1000ul; 683 684 pr_info("Registering PowerMac CPU frequency driver\n"); 685 pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", 686 low_freq/1000, hi_freq/1000, cur_freq/1000); 687 688 return cpufreq_register_driver(&pmac_cpufreq_driver); 689 } 690 691 module_init(pmac_cpufreq_setup); 692 693