xref: /linux/drivers/cpufreq/p4-clockmod.c (revision 4b4193256c8d3bc3a5397b5cd9494c2ad386317d)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *	Pentium 4/Xeon CPU on demand clock modulation/speed scaling
4  *	(C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
5  *	(C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
6  *	(C) 2002 Arjan van de Ven <arjanv@redhat.com>
7  *	(C) 2002 Tora T. Engstad
8  *	All Rights Reserved
9  *
10  *      The author(s) of this software shall not be held liable for damages
11  *      of any nature resulting due to the use of this software. This
12  *      software is provided AS-IS with no warranties.
13  *
14  *	Date		Errata			Description
15  *	20020525	N44, O17	12.5% or 25% DC causes lockup
16  */
17 
18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
19 
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/init.h>
23 #include <linux/smp.h>
24 #include <linux/cpufreq.h>
25 #include <linux/cpumask.h>
26 #include <linux/timex.h>
27 
28 #include <asm/processor.h>
29 #include <asm/msr.h>
30 #include <asm/timer.h>
31 #include <asm/cpu_device_id.h>
32 
33 #include "speedstep-lib.h"
34 
35 /*
36  * Duty Cycle (3bits), note DC_DISABLE is not specified in
37  * intel docs i just use it to mean disable
38  */
39 enum {
40 	DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
41 	DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
42 };
43 
44 #define DC_ENTRIES	8
45 
46 
47 static int has_N44_O17_errata[NR_CPUS];
48 static unsigned int stock_freq;
49 static struct cpufreq_driver p4clockmod_driver;
50 static unsigned int cpufreq_p4_get(unsigned int cpu);
51 
cpufreq_p4_setdc(unsigned int cpu,unsigned int newstate)52 static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
53 {
54 	u32 l, h;
55 
56 	if ((newstate > DC_DISABLE) || (newstate == DC_RESV))
57 		return -EINVAL;
58 
59 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
60 
61 	if (l & 0x01)
62 		pr_debug("CPU#%d currently thermal throttled\n", cpu);
63 
64 	if (has_N44_O17_errata[cpu] &&
65 	    (newstate == DC_25PT || newstate == DC_DFLT))
66 		newstate = DC_38PT;
67 
68 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
69 	if (newstate == DC_DISABLE) {
70 		pr_debug("CPU#%d disabling modulation\n", cpu);
71 		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
72 	} else {
73 		pr_debug("CPU#%d setting duty cycle to %d%%\n",
74 			cpu, ((125 * newstate) / 10));
75 		/* bits 63 - 5	: reserved
76 		 * bit  4	: enable/disable
77 		 * bits 3-1	: duty cycle
78 		 * bit  0	: reserved
79 		 */
80 		l = (l & ~14);
81 		l = l | (1<<4) | ((newstate & 0x7)<<1);
82 		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h);
83 	}
84 
85 	return 0;
86 }
87 
88 
89 static struct cpufreq_frequency_table p4clockmod_table[] = {
90 	{0, DC_RESV, CPUFREQ_ENTRY_INVALID},
91 	{0, DC_DFLT, 0},
92 	{0, DC_25PT, 0},
93 	{0, DC_38PT, 0},
94 	{0, DC_50PT, 0},
95 	{0, DC_64PT, 0},
96 	{0, DC_75PT, 0},
97 	{0, DC_88PT, 0},
98 	{0, DC_DISABLE, 0},
99 	{0, DC_RESV, CPUFREQ_TABLE_END},
100 };
101 
102 
cpufreq_p4_target(struct cpufreq_policy * policy,unsigned int index)103 static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index)
104 {
105 	int i;
106 
107 	/* run on each logical CPU,
108 	 * see section 13.15.3 of IA32 Intel Architecture Software
109 	 * Developer's Manual, Volume 3
110 	 */
111 	for_each_cpu(i, policy->cpus)
112 		cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data);
113 
114 	return 0;
115 }
116 
117 
cpufreq_p4_get_frequency(struct cpuinfo_x86 * c)118 static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
119 {
120 	if (c->x86 == 0x06) {
121 		if (cpu_has(c, X86_FEATURE_EST))
122 			pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n");
123 		switch (c->x86_model) {
124 		case 0x0E: /* Core */
125 		case 0x0F: /* Core Duo */
126 		case 0x16: /* Celeron Core */
127 		case 0x1C: /* Atom */
128 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
129 			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
130 		case 0x0D: /* Pentium M (Dothan) */
131 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
132 			fallthrough;
133 		case 0x09: /* Pentium M (Banias) */
134 			return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
135 		}
136 	}
137 
138 	if (c->x86 != 0xF)
139 		return 0;
140 
141 	/* on P-4s, the TSC runs with constant frequency independent whether
142 	 * throttling is active or not. */
143 	p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
144 
145 	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
146 		pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n");
147 		return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
148 	}
149 
150 	return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
151 }
152 
153 
154 
cpufreq_p4_cpu_init(struct cpufreq_policy * policy)155 static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
156 {
157 	struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
158 	int cpuid = 0;
159 	unsigned int i;
160 
161 #ifdef CONFIG_SMP
162 	cpumask_copy(policy->cpus, topology_sibling_cpumask(policy->cpu));
163 #endif
164 
165 	/* Errata workaround */
166 	cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping;
167 	switch (cpuid) {
168 	case 0x0f07:
169 	case 0x0f0a:
170 	case 0x0f11:
171 	case 0x0f12:
172 		has_N44_O17_errata[policy->cpu] = 1;
173 		pr_debug("has errata -- disabling low frequencies\n");
174 	}
175 
176 	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
177 	    c->x86_model < 2) {
178 		/* switch to maximum frequency and measure result */
179 		cpufreq_p4_setdc(policy->cpu, DC_DISABLE);
180 		recalibrate_cpu_khz();
181 	}
182 	/* get max frequency */
183 	stock_freq = cpufreq_p4_get_frequency(c);
184 	if (!stock_freq)
185 		return -EINVAL;
186 
187 	/* table init */
188 	for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
189 		if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
190 			p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
191 		else
192 			p4clockmod_table[i].frequency = (stock_freq * i)/8;
193 	}
194 
195 	/* cpuinfo and default policy values */
196 
197 	/* the transition latency is set to be 1 higher than the maximum
198 	 * transition latency of the ondemand governor */
199 	policy->cpuinfo.transition_latency = 10000001;
200 	policy->freq_table = &p4clockmod_table[0];
201 
202 	return 0;
203 }
204 
205 
cpufreq_p4_get(unsigned int cpu)206 static unsigned int cpufreq_p4_get(unsigned int cpu)
207 {
208 	u32 l, h;
209 
210 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
211 
212 	if (l & 0x10) {
213 		l = l >> 1;
214 		l &= 0x7;
215 	} else
216 		l = DC_DISABLE;
217 
218 	if (l != DC_DISABLE)
219 		return stock_freq * l / 8;
220 
221 	return stock_freq;
222 }
223 
224 static struct cpufreq_driver p4clockmod_driver = {
225 	.verify		= cpufreq_generic_frequency_table_verify,
226 	.target_index	= cpufreq_p4_target,
227 	.init		= cpufreq_p4_cpu_init,
228 	.get		= cpufreq_p4_get,
229 	.name		= "p4-clockmod",
230 	.attr		= cpufreq_generic_attr,
231 };
232 
233 static const struct x86_cpu_id cpufreq_p4_id[] = {
234 	X86_MATCH_VENDOR_FEATURE(INTEL, X86_FEATURE_ACC, NULL),
235 	{}
236 };
237 
238 /*
239  * Intentionally no MODULE_DEVICE_TABLE here: this driver should not
240  * be auto loaded.  Please don't add one.
241  */
242 
cpufreq_p4_init(void)243 static int __init cpufreq_p4_init(void)
244 {
245 	int ret;
246 
247 	/*
248 	 * THERM_CONTROL is architectural for IA32 now, so
249 	 * we can rely on the capability checks
250 	 */
251 	if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI))
252 		return -ENODEV;
253 
254 	ret = cpufreq_register_driver(&p4clockmod_driver);
255 	if (!ret)
256 		pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
257 
258 	return ret;
259 }
260 
261 
cpufreq_p4_exit(void)262 static void __exit cpufreq_p4_exit(void)
263 {
264 	cpufreq_unregister_driver(&p4clockmod_driver);
265 }
266 
267 
268 MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
269 MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
270 MODULE_LICENSE("GPL");
271 
272 late_initcall(cpufreq_p4_init);
273 module_exit(cpufreq_p4_exit);
274