1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (c) 2015 Linaro Ltd. 4 * Author: Pi-Cheng Chen <pi-cheng.chen@linaro.org> 5 */ 6 7 #include <linux/clk.h> 8 #include <linux/cpu.h> 9 #include <linux/cpufreq.h> 10 #include <linux/cpumask.h> 11 #include <linux/module.h> 12 #include <linux/of.h> 13 #include <linux/platform_device.h> 14 #include <linux/pm_opp.h> 15 #include <linux/regulator/consumer.h> 16 #include <linux/slab.h> 17 #include <linux/thermal.h> 18 19 #define MIN_VOLT_SHIFT (100000) 20 #define MAX_VOLT_SHIFT (200000) 21 #define MAX_VOLT_LIMIT (1150000) 22 #define VOLT_TOL (10000) 23 24 /* 25 * The struct mtk_cpu_dvfs_info holds necessary information for doing CPU DVFS 26 * on each CPU power/clock domain of Mediatek SoCs. Each CPU cluster in 27 * Mediatek SoCs has two voltage inputs, Vproc and Vsram. In some cases the two 28 * voltage inputs need to be controlled under a hardware limitation: 29 * 100mV < Vsram - Vproc < 200mV 30 * 31 * When scaling the clock frequency of a CPU clock domain, the clock source 32 * needs to be switched to another stable PLL clock temporarily until 33 * the original PLL becomes stable at target frequency. 34 */ 35 struct mtk_cpu_dvfs_info { 36 struct cpumask cpus; 37 struct device *cpu_dev; 38 struct regulator *proc_reg; 39 struct regulator *sram_reg; 40 struct clk *cpu_clk; 41 struct clk *inter_clk; 42 struct list_head list_head; 43 int intermediate_voltage; 44 bool need_voltage_tracking; 45 }; 46 47 static LIST_HEAD(dvfs_info_list); 48 49 static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu) 50 { 51 struct mtk_cpu_dvfs_info *info; 52 53 list_for_each_entry(info, &dvfs_info_list, list_head) { 54 if (cpumask_test_cpu(cpu, &info->cpus)) 55 return info; 56 } 57 58 return NULL; 59 } 60 61 static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info, 62 int new_vproc) 63 { 64 struct regulator *proc_reg = info->proc_reg; 65 struct regulator *sram_reg = info->sram_reg; 66 int old_vproc, old_vsram, new_vsram, vsram, vproc, ret; 67 68 old_vproc = regulator_get_voltage(proc_reg); 69 if (old_vproc < 0) { 70 pr_err("%s: invalid Vproc value: %d\n", __func__, old_vproc); 71 return old_vproc; 72 } 73 /* Vsram should not exceed the maximum allowed voltage of SoC. */ 74 new_vsram = min(new_vproc + MIN_VOLT_SHIFT, MAX_VOLT_LIMIT); 75 76 if (old_vproc < new_vproc) { 77 /* 78 * When scaling up voltages, Vsram and Vproc scale up step 79 * by step. At each step, set Vsram to (Vproc + 200mV) first, 80 * then set Vproc to (Vsram - 100mV). 81 * Keep doing it until Vsram and Vproc hit target voltages. 82 */ 83 do { 84 old_vsram = regulator_get_voltage(sram_reg); 85 if (old_vsram < 0) { 86 pr_err("%s: invalid Vsram value: %d\n", 87 __func__, old_vsram); 88 return old_vsram; 89 } 90 old_vproc = regulator_get_voltage(proc_reg); 91 if (old_vproc < 0) { 92 pr_err("%s: invalid Vproc value: %d\n", 93 __func__, old_vproc); 94 return old_vproc; 95 } 96 97 vsram = min(new_vsram, old_vproc + MAX_VOLT_SHIFT); 98 99 if (vsram + VOLT_TOL >= MAX_VOLT_LIMIT) { 100 vsram = MAX_VOLT_LIMIT; 101 102 /* 103 * If the target Vsram hits the maximum voltage, 104 * try to set the exact voltage value first. 105 */ 106 ret = regulator_set_voltage(sram_reg, vsram, 107 vsram); 108 if (ret) 109 ret = regulator_set_voltage(sram_reg, 110 vsram - VOLT_TOL, 111 vsram); 112 113 vproc = new_vproc; 114 } else { 115 ret = regulator_set_voltage(sram_reg, vsram, 116 vsram + VOLT_TOL); 117 118 vproc = vsram - MIN_VOLT_SHIFT; 119 } 120 if (ret) 121 return ret; 122 123 ret = regulator_set_voltage(proc_reg, vproc, 124 vproc + VOLT_TOL); 125 if (ret) { 126 regulator_set_voltage(sram_reg, old_vsram, 127 old_vsram); 128 return ret; 129 } 130 } while (vproc < new_vproc || vsram < new_vsram); 131 } else if (old_vproc > new_vproc) { 132 /* 133 * When scaling down voltages, Vsram and Vproc scale down step 134 * by step. At each step, set Vproc to (Vsram - 200mV) first, 135 * then set Vproc to (Vproc + 100mV). 136 * Keep doing it until Vsram and Vproc hit target voltages. 137 */ 138 do { 139 old_vproc = regulator_get_voltage(proc_reg); 140 if (old_vproc < 0) { 141 pr_err("%s: invalid Vproc value: %d\n", 142 __func__, old_vproc); 143 return old_vproc; 144 } 145 old_vsram = regulator_get_voltage(sram_reg); 146 if (old_vsram < 0) { 147 pr_err("%s: invalid Vsram value: %d\n", 148 __func__, old_vsram); 149 return old_vsram; 150 } 151 152 vproc = max(new_vproc, old_vsram - MAX_VOLT_SHIFT); 153 ret = regulator_set_voltage(proc_reg, vproc, 154 vproc + VOLT_TOL); 155 if (ret) 156 return ret; 157 158 if (vproc == new_vproc) 159 vsram = new_vsram; 160 else 161 vsram = max(new_vsram, vproc + MIN_VOLT_SHIFT); 162 163 if (vsram + VOLT_TOL >= MAX_VOLT_LIMIT) { 164 vsram = MAX_VOLT_LIMIT; 165 166 /* 167 * If the target Vsram hits the maximum voltage, 168 * try to set the exact voltage value first. 169 */ 170 ret = regulator_set_voltage(sram_reg, vsram, 171 vsram); 172 if (ret) 173 ret = regulator_set_voltage(sram_reg, 174 vsram - VOLT_TOL, 175 vsram); 176 } else { 177 ret = regulator_set_voltage(sram_reg, vsram, 178 vsram + VOLT_TOL); 179 } 180 181 if (ret) { 182 regulator_set_voltage(proc_reg, old_vproc, 183 old_vproc); 184 return ret; 185 } 186 } while (vproc > new_vproc + VOLT_TOL || 187 vsram > new_vsram + VOLT_TOL); 188 } 189 190 return 0; 191 } 192 193 static int mtk_cpufreq_set_voltage(struct mtk_cpu_dvfs_info *info, int vproc) 194 { 195 if (info->need_voltage_tracking) 196 return mtk_cpufreq_voltage_tracking(info, vproc); 197 else 198 return regulator_set_voltage(info->proc_reg, vproc, 199 vproc + VOLT_TOL); 200 } 201 202 static int mtk_cpufreq_set_target(struct cpufreq_policy *policy, 203 unsigned int index) 204 { 205 struct cpufreq_frequency_table *freq_table = policy->freq_table; 206 struct clk *cpu_clk = policy->clk; 207 struct clk *armpll = clk_get_parent(cpu_clk); 208 struct mtk_cpu_dvfs_info *info = policy->driver_data; 209 struct device *cpu_dev = info->cpu_dev; 210 struct dev_pm_opp *opp; 211 long freq_hz, old_freq_hz; 212 int vproc, old_vproc, inter_vproc, target_vproc, ret; 213 214 inter_vproc = info->intermediate_voltage; 215 216 old_freq_hz = clk_get_rate(cpu_clk); 217 old_vproc = regulator_get_voltage(info->proc_reg); 218 if (old_vproc < 0) { 219 pr_err("%s: invalid Vproc value: %d\n", __func__, old_vproc); 220 return old_vproc; 221 } 222 223 freq_hz = freq_table[index].frequency * 1000; 224 225 opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); 226 if (IS_ERR(opp)) { 227 pr_err("cpu%d: failed to find OPP for %ld\n", 228 policy->cpu, freq_hz); 229 return PTR_ERR(opp); 230 } 231 vproc = dev_pm_opp_get_voltage(opp); 232 dev_pm_opp_put(opp); 233 234 /* 235 * If the new voltage or the intermediate voltage is higher than the 236 * current voltage, scale up voltage first. 237 */ 238 target_vproc = (inter_vproc > vproc) ? inter_vproc : vproc; 239 if (old_vproc < target_vproc) { 240 ret = mtk_cpufreq_set_voltage(info, target_vproc); 241 if (ret) { 242 pr_err("cpu%d: failed to scale up voltage!\n", 243 policy->cpu); 244 mtk_cpufreq_set_voltage(info, old_vproc); 245 return ret; 246 } 247 } 248 249 /* Reparent the CPU clock to intermediate clock. */ 250 ret = clk_set_parent(cpu_clk, info->inter_clk); 251 if (ret) { 252 pr_err("cpu%d: failed to re-parent cpu clock!\n", 253 policy->cpu); 254 mtk_cpufreq_set_voltage(info, old_vproc); 255 WARN_ON(1); 256 return ret; 257 } 258 259 /* Set the original PLL to target rate. */ 260 ret = clk_set_rate(armpll, freq_hz); 261 if (ret) { 262 pr_err("cpu%d: failed to scale cpu clock rate!\n", 263 policy->cpu); 264 clk_set_parent(cpu_clk, armpll); 265 mtk_cpufreq_set_voltage(info, old_vproc); 266 return ret; 267 } 268 269 /* Set parent of CPU clock back to the original PLL. */ 270 ret = clk_set_parent(cpu_clk, armpll); 271 if (ret) { 272 pr_err("cpu%d: failed to re-parent cpu clock!\n", 273 policy->cpu); 274 mtk_cpufreq_set_voltage(info, inter_vproc); 275 WARN_ON(1); 276 return ret; 277 } 278 279 /* 280 * If the new voltage is lower than the intermediate voltage or the 281 * original voltage, scale down to the new voltage. 282 */ 283 if (vproc < inter_vproc || vproc < old_vproc) { 284 ret = mtk_cpufreq_set_voltage(info, vproc); 285 if (ret) { 286 pr_err("cpu%d: failed to scale down voltage!\n", 287 policy->cpu); 288 clk_set_parent(cpu_clk, info->inter_clk); 289 clk_set_rate(armpll, old_freq_hz); 290 clk_set_parent(cpu_clk, armpll); 291 return ret; 292 } 293 } 294 295 return 0; 296 } 297 298 #define DYNAMIC_POWER "dynamic-power-coefficient" 299 300 static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) 301 { 302 struct device *cpu_dev; 303 struct regulator *proc_reg = ERR_PTR(-ENODEV); 304 struct regulator *sram_reg = ERR_PTR(-ENODEV); 305 struct clk *cpu_clk = ERR_PTR(-ENODEV); 306 struct clk *inter_clk = ERR_PTR(-ENODEV); 307 struct dev_pm_opp *opp; 308 unsigned long rate; 309 int ret; 310 311 cpu_dev = get_cpu_device(cpu); 312 if (!cpu_dev) { 313 pr_err("failed to get cpu%d device\n", cpu); 314 return -ENODEV; 315 } 316 317 cpu_clk = clk_get(cpu_dev, "cpu"); 318 if (IS_ERR(cpu_clk)) { 319 if (PTR_ERR(cpu_clk) == -EPROBE_DEFER) 320 pr_warn("cpu clk for cpu%d not ready, retry.\n", cpu); 321 else 322 pr_err("failed to get cpu clk for cpu%d\n", cpu); 323 324 ret = PTR_ERR(cpu_clk); 325 return ret; 326 } 327 328 inter_clk = clk_get(cpu_dev, "intermediate"); 329 if (IS_ERR(inter_clk)) { 330 if (PTR_ERR(inter_clk) == -EPROBE_DEFER) 331 pr_warn("intermediate clk for cpu%d not ready, retry.\n", 332 cpu); 333 else 334 pr_err("failed to get intermediate clk for cpu%d\n", 335 cpu); 336 337 ret = PTR_ERR(inter_clk); 338 goto out_free_resources; 339 } 340 341 proc_reg = regulator_get_optional(cpu_dev, "proc"); 342 if (IS_ERR(proc_reg)) { 343 if (PTR_ERR(proc_reg) == -EPROBE_DEFER) 344 pr_warn("proc regulator for cpu%d not ready, retry.\n", 345 cpu); 346 else 347 pr_err("failed to get proc regulator for cpu%d\n", 348 cpu); 349 350 ret = PTR_ERR(proc_reg); 351 goto out_free_resources; 352 } 353 354 /* Both presence and absence of sram regulator are valid cases. */ 355 sram_reg = regulator_get_exclusive(cpu_dev, "sram"); 356 357 /* Get OPP-sharing information from "operating-points-v2" bindings */ 358 ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, &info->cpus); 359 if (ret) { 360 pr_err("failed to get OPP-sharing information for cpu%d\n", 361 cpu); 362 goto out_free_resources; 363 } 364 365 ret = dev_pm_opp_of_cpumask_add_table(&info->cpus); 366 if (ret) { 367 pr_warn("no OPP table for cpu%d\n", cpu); 368 goto out_free_resources; 369 } 370 371 /* Search a safe voltage for intermediate frequency. */ 372 rate = clk_get_rate(inter_clk); 373 opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate); 374 if (IS_ERR(opp)) { 375 pr_err("failed to get intermediate opp for cpu%d\n", cpu); 376 ret = PTR_ERR(opp); 377 goto out_free_opp_table; 378 } 379 info->intermediate_voltage = dev_pm_opp_get_voltage(opp); 380 dev_pm_opp_put(opp); 381 382 info->cpu_dev = cpu_dev; 383 info->proc_reg = proc_reg; 384 info->sram_reg = IS_ERR(sram_reg) ? NULL : sram_reg; 385 info->cpu_clk = cpu_clk; 386 info->inter_clk = inter_clk; 387 388 /* 389 * If SRAM regulator is present, software "voltage tracking" is needed 390 * for this CPU power domain. 391 */ 392 info->need_voltage_tracking = !IS_ERR(sram_reg); 393 394 return 0; 395 396 out_free_opp_table: 397 dev_pm_opp_of_cpumask_remove_table(&info->cpus); 398 399 out_free_resources: 400 if (!IS_ERR(proc_reg)) 401 regulator_put(proc_reg); 402 if (!IS_ERR(sram_reg)) 403 regulator_put(sram_reg); 404 if (!IS_ERR(cpu_clk)) 405 clk_put(cpu_clk); 406 if (!IS_ERR(inter_clk)) 407 clk_put(inter_clk); 408 409 return ret; 410 } 411 412 static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info) 413 { 414 if (!IS_ERR(info->proc_reg)) 415 regulator_put(info->proc_reg); 416 if (!IS_ERR(info->sram_reg)) 417 regulator_put(info->sram_reg); 418 if (!IS_ERR(info->cpu_clk)) 419 clk_put(info->cpu_clk); 420 if (!IS_ERR(info->inter_clk)) 421 clk_put(info->inter_clk); 422 423 dev_pm_opp_of_cpumask_remove_table(&info->cpus); 424 } 425 426 static int mtk_cpufreq_init(struct cpufreq_policy *policy) 427 { 428 struct mtk_cpu_dvfs_info *info; 429 struct cpufreq_frequency_table *freq_table; 430 int ret; 431 432 info = mtk_cpu_dvfs_info_lookup(policy->cpu); 433 if (!info) { 434 pr_err("dvfs info for cpu%d is not initialized.\n", 435 policy->cpu); 436 return -EINVAL; 437 } 438 439 ret = dev_pm_opp_init_cpufreq_table(info->cpu_dev, &freq_table); 440 if (ret) { 441 pr_err("failed to init cpufreq table for cpu%d: %d\n", 442 policy->cpu, ret); 443 return ret; 444 } 445 446 cpumask_copy(policy->cpus, &info->cpus); 447 policy->freq_table = freq_table; 448 policy->driver_data = info; 449 policy->clk = info->cpu_clk; 450 451 dev_pm_opp_of_register_em(info->cpu_dev, policy->cpus); 452 453 return 0; 454 } 455 456 static int mtk_cpufreq_exit(struct cpufreq_policy *policy) 457 { 458 struct mtk_cpu_dvfs_info *info = policy->driver_data; 459 460 dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table); 461 462 return 0; 463 } 464 465 static struct cpufreq_driver mtk_cpufreq_driver = { 466 .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | 467 CPUFREQ_HAVE_GOVERNOR_PER_POLICY | 468 CPUFREQ_IS_COOLING_DEV, 469 .verify = cpufreq_generic_frequency_table_verify, 470 .target_index = mtk_cpufreq_set_target, 471 .get = cpufreq_generic_get, 472 .init = mtk_cpufreq_init, 473 .exit = mtk_cpufreq_exit, 474 .name = "mtk-cpufreq", 475 .attr = cpufreq_generic_attr, 476 }; 477 478 static int mtk_cpufreq_probe(struct platform_device *pdev) 479 { 480 struct mtk_cpu_dvfs_info *info, *tmp; 481 int cpu, ret; 482 483 for_each_possible_cpu(cpu) { 484 info = mtk_cpu_dvfs_info_lookup(cpu); 485 if (info) 486 continue; 487 488 info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); 489 if (!info) { 490 ret = -ENOMEM; 491 goto release_dvfs_info_list; 492 } 493 494 ret = mtk_cpu_dvfs_info_init(info, cpu); 495 if (ret) { 496 dev_err(&pdev->dev, 497 "failed to initialize dvfs info for cpu%d\n", 498 cpu); 499 goto release_dvfs_info_list; 500 } 501 502 list_add(&info->list_head, &dvfs_info_list); 503 } 504 505 ret = cpufreq_register_driver(&mtk_cpufreq_driver); 506 if (ret) { 507 dev_err(&pdev->dev, "failed to register mtk cpufreq driver\n"); 508 goto release_dvfs_info_list; 509 } 510 511 return 0; 512 513 release_dvfs_info_list: 514 list_for_each_entry_safe(info, tmp, &dvfs_info_list, list_head) { 515 mtk_cpu_dvfs_info_release(info); 516 list_del(&info->list_head); 517 } 518 519 return ret; 520 } 521 522 static struct platform_driver mtk_cpufreq_platdrv = { 523 .driver = { 524 .name = "mtk-cpufreq", 525 }, 526 .probe = mtk_cpufreq_probe, 527 }; 528 529 /* List of machines supported by this driver */ 530 static const struct of_device_id mtk_cpufreq_machines[] __initconst = { 531 { .compatible = "mediatek,mt2701", }, 532 { .compatible = "mediatek,mt2712", }, 533 { .compatible = "mediatek,mt7622", }, 534 { .compatible = "mediatek,mt7623", }, 535 { .compatible = "mediatek,mt8167", }, 536 { .compatible = "mediatek,mt817x", }, 537 { .compatible = "mediatek,mt8173", }, 538 { .compatible = "mediatek,mt8176", }, 539 { .compatible = "mediatek,mt8183", }, 540 { .compatible = "mediatek,mt8516", }, 541 542 { } 543 }; 544 MODULE_DEVICE_TABLE(of, mtk_cpufreq_machines); 545 546 static int __init mtk_cpufreq_driver_init(void) 547 { 548 struct device_node *np; 549 const struct of_device_id *match; 550 struct platform_device *pdev; 551 int err; 552 553 np = of_find_node_by_path("/"); 554 if (!np) 555 return -ENODEV; 556 557 match = of_match_node(mtk_cpufreq_machines, np); 558 of_node_put(np); 559 if (!match) { 560 pr_debug("Machine is not compatible with mtk-cpufreq\n"); 561 return -ENODEV; 562 } 563 564 err = platform_driver_register(&mtk_cpufreq_platdrv); 565 if (err) 566 return err; 567 568 /* 569 * Since there's no place to hold device registration code and no 570 * device tree based way to match cpufreq driver yet, both the driver 571 * and the device registration codes are put here to handle defer 572 * probing. 573 */ 574 pdev = platform_device_register_simple("mtk-cpufreq", -1, NULL, 0); 575 if (IS_ERR(pdev)) { 576 pr_err("failed to register mtk-cpufreq platform device\n"); 577 platform_driver_unregister(&mtk_cpufreq_platdrv); 578 return PTR_ERR(pdev); 579 } 580 581 return 0; 582 } 583 device_initcall(mtk_cpufreq_driver_init); 584 585 MODULE_DESCRIPTION("MediaTek CPUFreq driver"); 586 MODULE_AUTHOR("Pi-Cheng Chen <pi-cheng.chen@linaro.org>"); 587 MODULE_LICENSE("GPL v2"); 588