xref: /linux/drivers/cpufreq/Kconfig.arm (revision bf52ca5912c07664276c7b94db820fa2d638b681)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# ARM CPU Frequency scaling drivers
4#
5
6config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM
7	tristate "Allwinner nvmem based SUN50I CPUFreq driver"
8	depends on ARCH_SUNXI || COMPILE_TEST
9	depends on NVMEM_SUNXI_SID
10	select PM_OPP
11	help
12	  This adds the nvmem based CPUFreq driver for Allwinner
13	  h6 SoC.
14
15	  To compile this driver as a module, choose M here: the
16	  module will be called sun50i-cpufreq-nvmem.
17
18config ARM_APPLE_SOC_CPUFREQ
19	tristate "Apple Silicon SoC CPUFreq support"
20	depends on ARCH_APPLE || (COMPILE_TEST && 64BIT)
21	select PM_OPP
22	default ARCH_APPLE
23	help
24	  This adds the CPUFreq driver for Apple Silicon machines
25	  (e.g. Apple M1).
26
27config ARM_ARMADA_37XX_CPUFREQ
28	tristate "Armada 37xx CPUFreq support"
29	depends on ARCH_MVEBU || COMPILE_TEST
30	depends on CPUFREQ_DT
31	help
32	  This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
33	  The Armada 37xx PMU supports 4 frequency and VDD levels.
34
35config ARM_ARMADA_8K_CPUFREQ
36	tristate "Armada 8K CPUFreq driver"
37	depends on ARCH_MVEBU || COMPILE_TEST
38	depends on CPUFREQ_DT
39	select ARMADA_AP_CPU_CLK if COMMON_CLK
40	help
41	  This enables the CPUFreq driver support for Marvell
42	  Armada8k SOCs.
43	  Armada8K device has the AP806 which supports scaling
44	  to any full integer divider.
45
46	  If in doubt, say N.
47
48config ARM_SCPI_CPUFREQ
49	tristate "SCPI based CPUfreq driver"
50	depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
51	help
52	  This adds the CPUfreq driver support for ARM platforms using SCPI
53	  protocol for CPU power management.
54
55	  This driver uses SCPI Message Protocol driver to interact with the
56	  firmware providing the CPU DVFS functionality.
57
58config ARM_VEXPRESS_SPC_CPUFREQ
59	tristate "Versatile Express SPC based CPUfreq driver"
60	depends on ARM_CPU_TOPOLOGY && HAVE_CLK
61	depends on ARCH_VEXPRESS_SPC || COMPILE_TEST
62	select PM_OPP
63	help
64	  This add the CPUfreq driver support for Versatile Express
65	  big.LITTLE platforms using SPC for power management.
66
67config ARM_BRCMSTB_AVS_CPUFREQ
68	tristate "Broadcom STB AVS CPUfreq driver"
69	depends on (ARCH_BRCMSTB && !ARM_SCMI_CPUFREQ) || COMPILE_TEST
70	default y
71	help
72	  Some Broadcom STB SoCs use a co-processor running proprietary firmware
73	  ("AVS") to handle voltage and frequency scaling. This driver provides
74	  a standard CPUfreq interface to the firmware.
75
76	  Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.
77
78config ARM_HIGHBANK_CPUFREQ
79	tristate "Calxeda Highbank-based"
80	depends on ARCH_HIGHBANK || COMPILE_TEST
81	depends on CPUFREQ_DT && REGULATOR && PL320_MBOX
82	default m
83	help
84	  This adds the CPUFreq driver for Calxeda Highbank SoC
85	  based boards.
86
87	  If in doubt, say N.
88
89config ARM_IMX6Q_CPUFREQ
90	tristate "Freescale i.MX6 cpufreq support"
91	depends on ARCH_MXC
92	depends on REGULATOR_ANATOP
93	depends on NVMEM_IMX_OCOTP || COMPILE_TEST
94	select PM_OPP
95	help
96	  This adds cpufreq driver support for Freescale i.MX6 series SoCs.
97
98	  If in doubt, say N.
99
100config ARM_IMX_CPUFREQ_DT
101	tristate "Freescale i.MX8M cpufreq support"
102	depends on CPUFREQ_DT
103	depends on ARCH_MXC || COMPILE_TEST
104	help
105	  This adds cpufreq driver support for Freescale i.MX7/i.MX8M
106	  series SoCs, based on cpufreq-dt.
107
108	  If in doubt, say N.
109
110config ARM_KIRKWOOD_CPUFREQ
111	def_bool MACH_KIRKWOOD
112	help
113	  This adds the CPUFreq driver for Marvell Kirkwood
114	  SoCs.
115
116config ARM_MEDIATEK_CPUFREQ
117	tristate "CPU Frequency scaling support for MediaTek SoCs"
118	depends on ARCH_MEDIATEK || COMPILE_TEST
119	depends on REGULATOR
120	select PM_OPP
121	help
122	  This adds the CPUFreq driver support for MediaTek SoCs.
123
124config ARM_MEDIATEK_CPUFREQ_HW
125	tristate "MediaTek CPUFreq HW driver"
126	depends on ARCH_MEDIATEK || COMPILE_TEST
127	default m
128	help
129	  Support for the CPUFreq HW driver.
130	  Some MediaTek chipsets have a HW engine to offload the steps
131	  necessary for changing the frequency of the CPUs. Firmware loaded
132	  in this engine exposes a programming interface to the OS.
133	  The driver implements the cpufreq interface for this HW engine.
134	  Say Y if you want to support CPUFreq HW.
135
136config ARM_OMAP2PLUS_CPUFREQ
137	bool "TI OMAP2+"
138	depends on ARCH_OMAP2PLUS || COMPILE_TEST
139	default ARCH_OMAP2PLUS
140
141config ARM_QCOM_CPUFREQ_NVMEM
142	tristate "Qualcomm nvmem based CPUFreq"
143	depends on ARCH_QCOM || COMPILE_TEST
144	depends on NVMEM_QCOM_QFPROM
145	depends on QCOM_SMEM
146	select PM_OPP
147	help
148	  This adds the CPUFreq driver for Qualcomm Kryo SoC based boards.
149
150	  If in doubt, say N.
151
152config ARM_QCOM_CPUFREQ_HW
153	tristate "QCOM CPUFreq HW driver"
154	depends on ARCH_QCOM || COMPILE_TEST
155	depends on COMMON_CLK
156	help
157	  Support for the CPUFreq HW driver.
158	  Some QCOM chipsets have a HW engine to offload the steps
159	  necessary for changing the frequency of the CPUs. Firmware loaded
160	  in this engine exposes a programming interface to the OS.
161	  The driver implements the cpufreq interface for this HW engine.
162	  Say Y if you want to support CPUFreq HW.
163
164config ARM_RASPBERRYPI_CPUFREQ
165	tristate "Raspberry Pi cpufreq support"
166	depends on CLK_RASPBERRYPI || COMPILE_TEST
167	help
168	  This adds the CPUFreq driver for Raspberry Pi
169
170	  If in doubt, say N.
171
172config ARM_S3C64XX_CPUFREQ
173	bool "Samsung S3C64XX"
174	depends on CPU_S3C6410 || COMPILE_TEST
175	default y
176	help
177	  This adds the CPUFreq driver for Samsung S3C6410 SoC.
178
179	  If in doubt, say N.
180
181config ARM_S5PV210_CPUFREQ
182	bool "Samsung S5PV210 and S5PC110"
183	depends on CPU_S5PV210 || COMPILE_TEST
184	default y
185	help
186	  This adds the CPUFreq driver for Samsung S5PV210 and
187	  S5PC110 SoCs.
188
189	  If in doubt, say N.
190
191config ARM_SA1110_CPUFREQ
192	bool
193
194config ARM_SCMI_CPUFREQ
195	tristate "SCMI based CPUfreq driver"
196	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
197	select PM_OPP
198	help
199	  This adds the CPUfreq driver support for ARM platforms using SCMI
200	  protocol for CPU power management.
201
202	  This driver uses SCMI Message Protocol driver to interact with the
203	  firmware providing the CPU DVFS functionality.
204
205config ARM_SPEAR_CPUFREQ
206	bool "SPEAr CPUFreq support"
207	depends on PLAT_SPEAR || COMPILE_TEST
208	default y
209	help
210	  This adds the CPUFreq driver support for SPEAr SOCs.
211
212config ARM_STI_CPUFREQ
213	tristate "STi CPUFreq support"
214	depends on CPUFREQ_DT
215	depends on SOC_STIH407 || COMPILE_TEST
216	help
217	  This driver uses the generic OPP framework to match the running
218	  platform with a predefined set of suitable values.  If not provided
219	  we will fall-back so safe-values contained in Device Tree.  Enable
220	  this config option if you wish to add CPUFreq support for STi based
221	  SoCs.
222
223config ARM_TEGRA20_CPUFREQ
224	tristate "Tegra20/30 CPUFreq support"
225	depends on ARCH_TEGRA || COMPILE_TEST
226	depends on CPUFREQ_DT
227	default y
228	help
229	  This adds the CPUFreq driver support for Tegra20/30 SOCs.
230
231config ARM_TEGRA124_CPUFREQ
232	bool "Tegra124 CPUFreq support"
233	depends on ARCH_TEGRA || COMPILE_TEST
234	depends on CPUFREQ_DT
235	default y
236	help
237	  This adds the CPUFreq driver support for Tegra124 SOCs.
238
239config ARM_TEGRA186_CPUFREQ
240	tristate "Tegra186 CPUFreq support"
241	depends on ARCH_TEGRA || COMPILE_TEST
242	depends on TEGRA_BPMP
243	help
244	  This adds the CPUFreq driver support for Tegra186 SOCs.
245
246config ARM_TEGRA194_CPUFREQ
247	tristate "Tegra194 CPUFreq support"
248	depends on ARCH_TEGRA_194_SOC || (64BIT && COMPILE_TEST)
249	depends on TEGRA_BPMP
250	default y
251	help
252	  This adds CPU frequency driver support for Tegra194 SOCs.
253
254config ARM_TI_CPUFREQ
255	bool "Texas Instruments CPUFreq support"
256	depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
257	default y
258	help
259	  This driver enables valid OPPs on the running platform based on
260	  values contained within the SoC in use. Enable this in order to
261	  use the cpufreq-dt driver on all Texas Instruments platforms that
262	  provide dt based operating-points-v2 tables with opp-supported-hw
263	  data provided. Required for cpufreq support on AM335x, AM437x,
264	  DRA7x, and AM57x platforms.
265
266config ARM_PXA2xx_CPUFREQ
267	tristate "Intel PXA2xx CPUfreq driver"
268	depends on PXA27x || PXA25x || COMPILE_TEST
269	help
270	  This add the CPUFreq driver support for Intel PXA2xx SOCs.
271
272	  If in doubt, say N.
273