1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2020 Western Digital Corporation or its affiliates. 4 * 5 * Most of the M-mode (i.e. NoMMU) RISC-V systems usually have a 6 * CLINT MMIO timer device. 7 */ 8 9 #define pr_fmt(fmt) "clint: " fmt 10 #include <linux/bitops.h> 11 #include <linux/clocksource.h> 12 #include <linux/clockchips.h> 13 #include <linux/cpu.h> 14 #include <linux/delay.h> 15 #include <linux/module.h> 16 #include <linux/of_address.h> 17 #include <linux/sched_clock.h> 18 #include <linux/io-64-nonatomic-lo-hi.h> 19 #include <linux/interrupt.h> 20 #include <linux/irq.h> 21 #include <linux/irqchip/chained_irq.h> 22 #include <linux/irqdomain.h> 23 #include <linux/of_irq.h> 24 #include <linux/smp.h> 25 #include <linux/timex.h> 26 27 #ifndef CONFIG_RISCV_M_MODE 28 #include <asm/clint.h> 29 #endif 30 31 #define CLINT_IPI_OFF 0 32 #define CLINT_TIMER_CMP_OFF 0x4000 33 #define CLINT_TIMER_VAL_OFF 0xbff8 34 35 /* CLINT manages IPI and Timer for RISC-V M-mode */ 36 static u32 __iomem *clint_ipi_base; 37 static unsigned int clint_ipi_irq; 38 static u64 __iomem *clint_timer_cmp; 39 static u64 __iomem *clint_timer_val; 40 static unsigned long clint_timer_freq; 41 static unsigned int clint_timer_irq; 42 43 #ifdef CONFIG_RISCV_M_MODE 44 u64 __iomem *clint_time_val; 45 EXPORT_SYMBOL(clint_time_val); 46 #endif 47 48 #ifdef CONFIG_SMP 49 static void clint_send_ipi(unsigned int cpu) 50 { 51 writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu)); 52 } 53 54 static void clint_clear_ipi(void) 55 { 56 writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id())); 57 } 58 59 static void clint_ipi_interrupt(struct irq_desc *desc) 60 { 61 struct irq_chip *chip = irq_desc_get_chip(desc); 62 63 chained_irq_enter(chip, desc); 64 65 clint_clear_ipi(); 66 ipi_mux_process(); 67 68 chained_irq_exit(chip, desc); 69 } 70 #endif 71 72 #ifdef CONFIG_64BIT 73 #define clint_get_cycles() readq_relaxed(clint_timer_val) 74 #else 75 #define clint_get_cycles() readl_relaxed(clint_timer_val) 76 #define clint_get_cycles_hi() readl_relaxed(((u32 *)clint_timer_val) + 1) 77 #endif 78 79 #ifdef CONFIG_64BIT 80 static u64 notrace clint_get_cycles64(void) 81 { 82 return clint_get_cycles(); 83 } 84 #else /* CONFIG_64BIT */ 85 static u64 notrace clint_get_cycles64(void) 86 { 87 u32 hi, lo; 88 89 do { 90 hi = clint_get_cycles_hi(); 91 lo = clint_get_cycles(); 92 } while (hi != clint_get_cycles_hi()); 93 94 return ((u64)hi << 32) | lo; 95 } 96 #endif /* CONFIG_64BIT */ 97 98 static u64 clint_rdtime(struct clocksource *cs) 99 { 100 return clint_get_cycles64(); 101 } 102 103 static struct clocksource clint_clocksource = { 104 .name = "clint_clocksource", 105 .rating = 300, 106 .mask = CLOCKSOURCE_MASK(64), 107 .flags = CLOCK_SOURCE_IS_CONTINUOUS, 108 .read = clint_rdtime, 109 }; 110 111 static int clint_clock_next_event(unsigned long delta, 112 struct clock_event_device *ce) 113 { 114 void __iomem *r = clint_timer_cmp + 115 cpuid_to_hartid_map(smp_processor_id()); 116 117 csr_set(CSR_IE, IE_TIE); 118 writeq_relaxed(clint_get_cycles64() + delta, r); 119 return 0; 120 } 121 122 static DEFINE_PER_CPU(struct clock_event_device, clint_clock_event) = { 123 .name = "clint_clockevent", 124 .features = CLOCK_EVT_FEAT_ONESHOT, 125 .rating = 100, 126 .set_next_event = clint_clock_next_event, 127 }; 128 129 static int clint_timer_starting_cpu(unsigned int cpu) 130 { 131 struct clock_event_device *ce = per_cpu_ptr(&clint_clock_event, cpu); 132 133 ce->cpumask = cpumask_of(cpu); 134 clockevents_config_and_register(ce, clint_timer_freq, 100, ULONG_MAX); 135 136 enable_percpu_irq(clint_timer_irq, 137 irq_get_trigger_type(clint_timer_irq)); 138 enable_percpu_irq(clint_ipi_irq, 139 irq_get_trigger_type(clint_ipi_irq)); 140 return 0; 141 } 142 143 static int clint_timer_dying_cpu(unsigned int cpu) 144 { 145 disable_percpu_irq(clint_timer_irq); 146 /* 147 * Don't disable IPI when CPU goes offline because 148 * the masking/unmasking of virtual IPIs is done 149 * via generic IPI-Mux 150 */ 151 return 0; 152 } 153 154 static irqreturn_t clint_timer_interrupt(int irq, void *dev_id) 155 { 156 struct clock_event_device *evdev = this_cpu_ptr(&clint_clock_event); 157 158 csr_clear(CSR_IE, IE_TIE); 159 evdev->event_handler(evdev); 160 161 return IRQ_HANDLED; 162 } 163 164 static int __init clint_timer_init_dt(struct device_node *np) 165 { 166 int rc; 167 u32 i, nr_irqs; 168 void __iomem *base; 169 struct of_phandle_args oirq; 170 171 /* 172 * Ensure that CLINT device interrupts are either RV_IRQ_TIMER or 173 * RV_IRQ_SOFT. If it's anything else then we ignore the device. 174 */ 175 nr_irqs = of_irq_count(np); 176 for (i = 0; i < nr_irqs; i++) { 177 if (of_irq_parse_one(np, i, &oirq)) { 178 pr_err("%pOFP: failed to parse irq %d.\n", np, i); 179 continue; 180 } 181 182 if ((oirq.args_count != 1) || 183 (oirq.args[0] != RV_IRQ_TIMER && 184 oirq.args[0] != RV_IRQ_SOFT)) { 185 pr_err("%pOFP: invalid irq %d (hwirq %d)\n", 186 np, i, oirq.args[0]); 187 return -ENODEV; 188 } 189 190 /* Find parent irq domain and map ipi irq */ 191 if (!clint_ipi_irq && 192 oirq.args[0] == RV_IRQ_SOFT && 193 irq_find_host(oirq.np)) 194 clint_ipi_irq = irq_of_parse_and_map(np, i); 195 196 /* Find parent irq domain and map timer irq */ 197 if (!clint_timer_irq && 198 oirq.args[0] == RV_IRQ_TIMER && 199 irq_find_host(oirq.np)) 200 clint_timer_irq = irq_of_parse_and_map(np, i); 201 } 202 203 /* If CLINT ipi or timer irq not found then fail */ 204 if (!clint_ipi_irq || !clint_timer_irq) { 205 pr_err("%pOFP: ipi/timer irq not found\n", np); 206 return -ENODEV; 207 } 208 209 base = of_iomap(np, 0); 210 if (!base) { 211 pr_err("%pOFP: could not map registers\n", np); 212 return -ENODEV; 213 } 214 215 clint_ipi_base = base + CLINT_IPI_OFF; 216 clint_timer_cmp = base + CLINT_TIMER_CMP_OFF; 217 clint_timer_val = base + CLINT_TIMER_VAL_OFF; 218 clint_timer_freq = riscv_timebase; 219 220 #ifdef CONFIG_RISCV_M_MODE 221 /* 222 * Yes, that's an odd naming scheme. time_val is public, but hopefully 223 * will die in favor of something cleaner. 224 */ 225 clint_time_val = clint_timer_val; 226 #endif 227 228 pr_info("%pOFP: timer running at %ld Hz\n", np, clint_timer_freq); 229 230 rc = clocksource_register_hz(&clint_clocksource, clint_timer_freq); 231 if (rc) { 232 pr_err("%pOFP: clocksource register failed [%d]\n", np, rc); 233 goto fail_iounmap; 234 } 235 236 sched_clock_register(clint_get_cycles64, 64, clint_timer_freq); 237 238 rc = request_percpu_irq(clint_timer_irq, clint_timer_interrupt, 239 "clint-timer", &clint_clock_event); 240 if (rc) { 241 pr_err("registering percpu irq failed [%d]\n", rc); 242 goto fail_iounmap; 243 } 244 245 #ifdef CONFIG_SMP 246 rc = ipi_mux_create(BITS_PER_BYTE, clint_send_ipi); 247 if (rc <= 0) { 248 pr_err("unable to create muxed IPIs\n"); 249 rc = (rc < 0) ? rc : -ENODEV; 250 goto fail_free_irq; 251 } 252 253 irq_set_chained_handler(clint_ipi_irq, clint_ipi_interrupt); 254 riscv_ipi_set_virq_range(rc, BITS_PER_BYTE, true); 255 clint_clear_ipi(); 256 #endif 257 258 rc = cpuhp_setup_state(CPUHP_AP_CLINT_TIMER_STARTING, 259 "clockevents/clint/timer:starting", 260 clint_timer_starting_cpu, 261 clint_timer_dying_cpu); 262 if (rc) { 263 pr_err("%pOFP: cpuhp setup state failed [%d]\n", np, rc); 264 goto fail_free_irq; 265 } 266 267 return 0; 268 269 fail_free_irq: 270 free_percpu_irq(clint_timer_irq, &clint_clock_event); 271 fail_iounmap: 272 iounmap(base); 273 return rc; 274 } 275 276 TIMER_OF_DECLARE(clint_timer, "riscv,clint0", clint_timer_init_dt); 277 TIMER_OF_DECLARE(clint_timer1, "sifive,clint0", clint_timer_init_dt); 278