xref: /linux/drivers/clk/ti/dpll.c (revision da1d9caf95def6f0320819cf941c9fd1069ba9e1)
1 /*
2  * OMAP DPLL clock support
3  *
4  * Copyright (C) 2013 Texas Instruments, Inc.
5  *
6  * Tero Kristo <t-kristo@ti.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  *
12  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
13  * kind, whether express or implied; without even the implied warranty
14  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  */
17 
18 #include <linux/clk.h>
19 #include <linux/clk-provider.h>
20 #include <linux/slab.h>
21 #include <linux/err.h>
22 #include <linux/of.h>
23 #include <linux/of_address.h>
24 #include <linux/clk/ti.h>
25 #include "clock.h"
26 
27 #undef pr_fmt
28 #define pr_fmt(fmt) "%s: " fmt, __func__
29 
30 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
31 	defined(CONFIG_SOC_DRA7XX)
32 static const struct clk_ops dpll_m4xen_ck_ops = {
33 	.enable		= &omap3_noncore_dpll_enable,
34 	.disable	= &omap3_noncore_dpll_disable,
35 	.recalc_rate	= &omap4_dpll_regm4xen_recalc,
36 	.round_rate	= &omap4_dpll_regm4xen_round_rate,
37 	.set_rate	= &omap3_noncore_dpll_set_rate,
38 	.set_parent	= &omap3_noncore_dpll_set_parent,
39 	.set_rate_and_parent	= &omap3_noncore_dpll_set_rate_and_parent,
40 	.determine_rate	= &omap4_dpll_regm4xen_determine_rate,
41 	.get_parent	= &omap2_init_dpll_parent,
42 	.save_context	= &omap3_core_dpll_save_context,
43 	.restore_context = &omap3_core_dpll_restore_context,
44 };
45 #else
46 static const struct clk_ops dpll_m4xen_ck_ops = {};
47 #endif
48 
49 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \
50 	defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) || \
51 	defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
52 static const struct clk_ops dpll_core_ck_ops = {
53 	.recalc_rate	= &omap3_dpll_recalc,
54 	.get_parent	= &omap2_init_dpll_parent,
55 };
56 
57 static const struct clk_ops dpll_ck_ops = {
58 	.enable		= &omap3_noncore_dpll_enable,
59 	.disable	= &omap3_noncore_dpll_disable,
60 	.recalc_rate	= &omap3_dpll_recalc,
61 	.round_rate	= &omap2_dpll_round_rate,
62 	.set_rate	= &omap3_noncore_dpll_set_rate,
63 	.set_parent	= &omap3_noncore_dpll_set_parent,
64 	.set_rate_and_parent	= &omap3_noncore_dpll_set_rate_and_parent,
65 	.determine_rate	= &omap3_noncore_dpll_determine_rate,
66 	.get_parent	= &omap2_init_dpll_parent,
67 	.save_context	= &omap3_noncore_dpll_save_context,
68 	.restore_context = &omap3_noncore_dpll_restore_context,
69 };
70 
71 static const struct clk_ops dpll_no_gate_ck_ops = {
72 	.recalc_rate	= &omap3_dpll_recalc,
73 	.get_parent	= &omap2_init_dpll_parent,
74 	.round_rate	= &omap2_dpll_round_rate,
75 	.set_rate	= &omap3_noncore_dpll_set_rate,
76 	.set_parent	= &omap3_noncore_dpll_set_parent,
77 	.set_rate_and_parent	= &omap3_noncore_dpll_set_rate_and_parent,
78 	.determine_rate	= &omap3_noncore_dpll_determine_rate,
79 	.save_context	= &omap3_noncore_dpll_save_context,
80 	.restore_context = &omap3_noncore_dpll_restore_context
81 };
82 #else
83 static const struct clk_ops dpll_core_ck_ops = {};
84 static const struct clk_ops dpll_ck_ops = {};
85 static const struct clk_ops dpll_no_gate_ck_ops = {};
86 const struct clk_hw_omap_ops clkhwops_omap3_dpll = {};
87 #endif
88 
89 #ifdef CONFIG_ARCH_OMAP2
90 static const struct clk_ops omap2_dpll_core_ck_ops = {
91 	.get_parent	= &omap2_init_dpll_parent,
92 	.recalc_rate	= &omap2_dpllcore_recalc,
93 	.round_rate	= &omap2_dpll_round_rate,
94 	.set_rate	= &omap2_reprogram_dpllcore,
95 };
96 #else
97 static const struct clk_ops omap2_dpll_core_ck_ops = {};
98 #endif
99 
100 #ifdef CONFIG_ARCH_OMAP3
101 static const struct clk_ops omap3_dpll_core_ck_ops = {
102 	.get_parent	= &omap2_init_dpll_parent,
103 	.recalc_rate	= &omap3_dpll_recalc,
104 	.round_rate	= &omap2_dpll_round_rate,
105 };
106 #else
107 static const struct clk_ops omap3_dpll_core_ck_ops = {};
108 #endif
109 
110 #ifdef CONFIG_ARCH_OMAP3
111 static const struct clk_ops omap3_dpll_ck_ops = {
112 	.enable		= &omap3_noncore_dpll_enable,
113 	.disable	= &omap3_noncore_dpll_disable,
114 	.get_parent	= &omap2_init_dpll_parent,
115 	.recalc_rate	= &omap3_dpll_recalc,
116 	.set_rate	= &omap3_noncore_dpll_set_rate,
117 	.set_parent	= &omap3_noncore_dpll_set_parent,
118 	.set_rate_and_parent	= &omap3_noncore_dpll_set_rate_and_parent,
119 	.determine_rate	= &omap3_noncore_dpll_determine_rate,
120 	.round_rate	= &omap2_dpll_round_rate,
121 };
122 
123 static const struct clk_ops omap3_dpll5_ck_ops = {
124 	.enable		= &omap3_noncore_dpll_enable,
125 	.disable	= &omap3_noncore_dpll_disable,
126 	.get_parent	= &omap2_init_dpll_parent,
127 	.recalc_rate	= &omap3_dpll_recalc,
128 	.set_rate	= &omap3_dpll5_set_rate,
129 	.set_parent	= &omap3_noncore_dpll_set_parent,
130 	.set_rate_and_parent	= &omap3_noncore_dpll_set_rate_and_parent,
131 	.determine_rate	= &omap3_noncore_dpll_determine_rate,
132 	.round_rate	= &omap2_dpll_round_rate,
133 };
134 
135 static const struct clk_ops omap3_dpll_per_ck_ops = {
136 	.enable		= &omap3_noncore_dpll_enable,
137 	.disable	= &omap3_noncore_dpll_disable,
138 	.get_parent	= &omap2_init_dpll_parent,
139 	.recalc_rate	= &omap3_dpll_recalc,
140 	.set_rate	= &omap3_dpll4_set_rate,
141 	.set_parent	= &omap3_noncore_dpll_set_parent,
142 	.set_rate_and_parent	= &omap3_dpll4_set_rate_and_parent,
143 	.determine_rate	= &omap3_noncore_dpll_determine_rate,
144 	.round_rate	= &omap2_dpll_round_rate,
145 };
146 #endif
147 
148 static const struct clk_ops dpll_x2_ck_ops = {
149 	.recalc_rate	= &omap3_clkoutx2_recalc,
150 };
151 
152 /**
153  * _register_dpll - low level registration of a DPLL clock
154  * @user: pointer to the hardware clock definition for the clock
155  * @node: device node for the clock
156  *
157  * Finalizes DPLL registration process. In case a failure (clk-ref or
158  * clk-bypass is missing), the clock is added to retry list and
159  * the initialization is retried on later stage.
160  */
161 static void __init _register_dpll(void *user,
162 				  struct device_node *node)
163 {
164 	struct clk_hw *hw = user;
165 	struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw);
166 	struct dpll_data *dd = clk_hw->dpll_data;
167 	const char *name;
168 	struct clk *clk;
169 	const struct clk_init_data *init = hw->init;
170 
171 	clk = of_clk_get(node, 0);
172 	if (IS_ERR(clk)) {
173 		pr_debug("clk-ref missing for %pOFn, retry later\n",
174 			 node);
175 		if (!ti_clk_retry_init(node, hw, _register_dpll))
176 			return;
177 
178 		goto cleanup;
179 	}
180 
181 	dd->clk_ref = __clk_get_hw(clk);
182 
183 	clk = of_clk_get(node, 1);
184 
185 	if (IS_ERR(clk)) {
186 		pr_debug("clk-bypass missing for %pOFn, retry later\n",
187 			 node);
188 		if (!ti_clk_retry_init(node, hw, _register_dpll))
189 			return;
190 
191 		goto cleanup;
192 	}
193 
194 	dd->clk_bypass = __clk_get_hw(clk);
195 
196 	/* register the clock */
197 	name = ti_dt_clk_name(node);
198 	clk = ti_clk_register_omap_hw(NULL, &clk_hw->hw, name);
199 
200 	if (!IS_ERR(clk)) {
201 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
202 		kfree(init->parent_names);
203 		kfree(init);
204 		return;
205 	}
206 
207 cleanup:
208 	kfree(clk_hw->dpll_data);
209 	kfree(init->parent_names);
210 	kfree(init);
211 	kfree(clk_hw);
212 }
213 
214 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
215 	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \
216 	defined(CONFIG_SOC_AM43XX)
217 /**
218  * _register_dpll_x2 - Registers a DPLLx2 clock
219  * @node: device node for this clock
220  * @ops: clk_ops for this clock
221  * @hw_ops: clk_hw_ops for this clock
222  *
223  * Initializes a DPLL x 2 clock from device tree data.
224  */
225 static void _register_dpll_x2(struct device_node *node,
226 			      const struct clk_ops *ops,
227 			      const struct clk_hw_omap_ops *hw_ops)
228 {
229 	struct clk *clk;
230 	struct clk_init_data init = { NULL };
231 	struct clk_hw_omap *clk_hw;
232 	const char *name = ti_dt_clk_name(node);
233 	const char *parent_name;
234 
235 	parent_name = of_clk_get_parent_name(node, 0);
236 	if (!parent_name) {
237 		pr_err("%pOFn must have parent\n", node);
238 		return;
239 	}
240 
241 	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
242 	if (!clk_hw)
243 		return;
244 
245 	clk_hw->ops = hw_ops;
246 	clk_hw->hw.init = &init;
247 
248 	init.name = name;
249 	init.ops = ops;
250 	init.parent_names = &parent_name;
251 	init.num_parents = 1;
252 
253 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
254 	defined(CONFIG_SOC_DRA7XX)
255 	if (hw_ops == &clkhwops_omap4_dpllmx) {
256 		int ret;
257 
258 		/* Check if register defined, if not, drop hw-ops */
259 		ret = of_property_count_elems_of_size(node, "reg", 1);
260 		if (ret <= 0) {
261 			clk_hw->ops = NULL;
262 		} else if (ti_clk_get_reg_addr(node, 0, &clk_hw->clksel_reg)) {
263 			kfree(clk_hw);
264 			return;
265 		}
266 	}
267 #endif
268 
269 	/* register the clock */
270 	clk = ti_clk_register_omap_hw(NULL, &clk_hw->hw, name);
271 
272 	if (IS_ERR(clk))
273 		kfree(clk_hw);
274 	else
275 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
276 }
277 #endif
278 
279 /**
280  * of_ti_dpll_setup - Setup function for OMAP DPLL clocks
281  * @node: device node containing the DPLL info
282  * @ops: ops for the DPLL
283  * @ddt: DPLL data template to use
284  *
285  * Initializes a DPLL clock from device tree data.
286  */
287 static void __init of_ti_dpll_setup(struct device_node *node,
288 				    const struct clk_ops *ops,
289 				    const struct dpll_data *ddt)
290 {
291 	struct clk_hw_omap *clk_hw = NULL;
292 	struct clk_init_data *init = NULL;
293 	const char **parent_names = NULL;
294 	struct dpll_data *dd = NULL;
295 	int ssc_clk_index;
296 	u8 dpll_mode = 0;
297 	u32 min_div;
298 
299 	dd = kmemdup(ddt, sizeof(*dd), GFP_KERNEL);
300 	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
301 	init = kzalloc(sizeof(*init), GFP_KERNEL);
302 	if (!dd || !clk_hw || !init)
303 		goto cleanup;
304 
305 	clk_hw->dpll_data = dd;
306 	clk_hw->ops = &clkhwops_omap3_dpll;
307 	clk_hw->hw.init = init;
308 
309 	init->name = ti_dt_clk_name(node);
310 	init->ops = ops;
311 
312 	init->num_parents = of_clk_get_parent_count(node);
313 	if (!init->num_parents) {
314 		pr_err("%pOFn must have parent(s)\n", node);
315 		goto cleanup;
316 	}
317 
318 	parent_names = kcalloc(init->num_parents, sizeof(char *), GFP_KERNEL);
319 	if (!parent_names)
320 		goto cleanup;
321 
322 	of_clk_parent_fill(node, parent_names, init->num_parents);
323 
324 	init->parent_names = parent_names;
325 
326 	if (ti_clk_get_reg_addr(node, 0, &dd->control_reg))
327 		goto cleanup;
328 
329 	/*
330 	 * Special case for OMAP2 DPLL, register order is different due to
331 	 * missing idlest_reg, also clkhwops is different. Detected from
332 	 * missing idlest_mask.
333 	 */
334 	if (!dd->idlest_mask) {
335 		if (ti_clk_get_reg_addr(node, 1, &dd->mult_div1_reg))
336 			goto cleanup;
337 #ifdef CONFIG_ARCH_OMAP2
338 		clk_hw->ops = &clkhwops_omap2xxx_dpll;
339 		omap2xxx_clkt_dpllcore_init(&clk_hw->hw);
340 #endif
341 	} else {
342 		if (ti_clk_get_reg_addr(node, 1, &dd->idlest_reg))
343 			goto cleanup;
344 
345 		if (ti_clk_get_reg_addr(node, 2, &dd->mult_div1_reg))
346 			goto cleanup;
347 	}
348 
349 	if (dd->autoidle_mask) {
350 		if (ti_clk_get_reg_addr(node, 3, &dd->autoidle_reg))
351 			goto cleanup;
352 
353 		ssc_clk_index = 4;
354 	} else {
355 		ssc_clk_index = 3;
356 	}
357 
358 	if (dd->ssc_deltam_int_mask && dd->ssc_deltam_frac_mask &&
359 	    dd->ssc_modfreq_mant_mask && dd->ssc_modfreq_exp_mask) {
360 		if (ti_clk_get_reg_addr(node, ssc_clk_index++,
361 					&dd->ssc_deltam_reg))
362 			goto cleanup;
363 
364 		if (ti_clk_get_reg_addr(node, ssc_clk_index++,
365 					&dd->ssc_modfreq_reg))
366 			goto cleanup;
367 
368 		of_property_read_u32(node, "ti,ssc-modfreq-hz",
369 				     &dd->ssc_modfreq);
370 		of_property_read_u32(node, "ti,ssc-deltam", &dd->ssc_deltam);
371 		dd->ssc_downspread =
372 			of_property_read_bool(node, "ti,ssc-downspread");
373 	}
374 
375 	if (of_property_read_bool(node, "ti,low-power-stop"))
376 		dpll_mode |= 1 << DPLL_LOW_POWER_STOP;
377 
378 	if (of_property_read_bool(node, "ti,low-power-bypass"))
379 		dpll_mode |= 1 << DPLL_LOW_POWER_BYPASS;
380 
381 	if (of_property_read_bool(node, "ti,lock"))
382 		dpll_mode |= 1 << DPLL_LOCKED;
383 
384 	if (!of_property_read_u32(node, "ti,min-div", &min_div) &&
385 	    min_div > dd->min_divider)
386 		dd->min_divider = min_div;
387 
388 	if (dpll_mode)
389 		dd->modes = dpll_mode;
390 
391 	_register_dpll(&clk_hw->hw, node);
392 	return;
393 
394 cleanup:
395 	kfree(dd);
396 	kfree(parent_names);
397 	kfree(init);
398 	kfree(clk_hw);
399 }
400 
401 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
402 	defined(CONFIG_SOC_DRA7XX)
403 static void __init of_ti_omap4_dpll_x2_setup(struct device_node *node)
404 {
405 	_register_dpll_x2(node, &dpll_x2_ck_ops, &clkhwops_omap4_dpllmx);
406 }
407 CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock",
408 	       of_ti_omap4_dpll_x2_setup);
409 #endif
410 
411 #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
412 static void __init of_ti_am3_dpll_x2_setup(struct device_node *node)
413 {
414 	_register_dpll_x2(node, &dpll_x2_ck_ops, NULL);
415 }
416 CLK_OF_DECLARE(ti_am3_dpll_x2_clock, "ti,am3-dpll-x2-clock",
417 	       of_ti_am3_dpll_x2_setup);
418 #endif
419 
420 #ifdef CONFIG_ARCH_OMAP3
421 static void __init of_ti_omap3_dpll_setup(struct device_node *node)
422 {
423 	const struct dpll_data dd = {
424 		.idlest_mask = 0x1,
425 		.enable_mask = 0x7,
426 		.autoidle_mask = 0x7,
427 		.mult_mask = 0x7ff << 8,
428 		.div1_mask = 0x7f,
429 		.max_multiplier = 2047,
430 		.max_divider = 128,
431 		.min_divider = 1,
432 		.freqsel_mask = 0xf0,
433 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
434 	};
435 
436 	if ((of_machine_is_compatible("ti,omap3630") ||
437 	     of_machine_is_compatible("ti,omap36xx")) &&
438 	     of_node_name_eq(node, "dpll5_ck"))
439 		of_ti_dpll_setup(node, &omap3_dpll5_ck_ops, &dd);
440 	else
441 		of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd);
442 }
443 CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock",
444 	       of_ti_omap3_dpll_setup);
445 
446 static void __init of_ti_omap3_core_dpll_setup(struct device_node *node)
447 {
448 	const struct dpll_data dd = {
449 		.idlest_mask = 0x1,
450 		.enable_mask = 0x7,
451 		.autoidle_mask = 0x7,
452 		.mult_mask = 0x7ff << 16,
453 		.div1_mask = 0x7f << 8,
454 		.max_multiplier = 2047,
455 		.max_divider = 128,
456 		.min_divider = 1,
457 		.freqsel_mask = 0xf0,
458 	};
459 
460 	of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd);
461 }
462 CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock",
463 	       of_ti_omap3_core_dpll_setup);
464 
465 static void __init of_ti_omap3_per_dpll_setup(struct device_node *node)
466 {
467 	const struct dpll_data dd = {
468 		.idlest_mask = 0x1 << 1,
469 		.enable_mask = 0x7 << 16,
470 		.autoidle_mask = 0x7 << 3,
471 		.mult_mask = 0x7ff << 8,
472 		.div1_mask = 0x7f,
473 		.max_multiplier = 2047,
474 		.max_divider = 128,
475 		.min_divider = 1,
476 		.freqsel_mask = 0xf00000,
477 		.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
478 	};
479 
480 	of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd);
481 }
482 CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock",
483 	       of_ti_omap3_per_dpll_setup);
484 
485 static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node)
486 {
487 	const struct dpll_data dd = {
488 		.idlest_mask = 0x1 << 1,
489 		.enable_mask = 0x7 << 16,
490 		.autoidle_mask = 0x7 << 3,
491 		.mult_mask = 0xfff << 8,
492 		.div1_mask = 0x7f,
493 		.max_multiplier = 4095,
494 		.max_divider = 128,
495 		.min_divider = 1,
496 		.sddiv_mask = 0xff << 24,
497 		.dco_mask = 0xe << 20,
498 		.flags = DPLL_J_TYPE,
499 		.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
500 	};
501 
502 	of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd);
503 }
504 CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock",
505 	       of_ti_omap3_per_jtype_dpll_setup);
506 #endif
507 
508 static void __init of_ti_omap4_dpll_setup(struct device_node *node)
509 {
510 	const struct dpll_data dd = {
511 		.idlest_mask = 0x1,
512 		.enable_mask = 0x7,
513 		.autoidle_mask = 0x7,
514 		.mult_mask = 0x7ff << 8,
515 		.div1_mask = 0x7f,
516 		.max_multiplier = 2047,
517 		.max_divider = 128,
518 		.min_divider = 1,
519 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
520 	};
521 
522 	of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
523 }
524 CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock",
525 	       of_ti_omap4_dpll_setup);
526 
527 static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node)
528 {
529 	const struct dpll_data dd = {
530 		.idlest_mask = 0x1,
531 		.enable_mask = 0x7,
532 		.autoidle_mask = 0x7,
533 		.mult_mask = 0x7ff << 8,
534 		.div1_mask = 0x7f,
535 		.max_multiplier = 2047,
536 		.max_divider = 128,
537 		.dcc_mask = BIT(22),
538 		.dcc_rate = 1400000000, /* DCC beyond 1.4GHz */
539 		.min_divider = 1,
540 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
541 	};
542 
543 	of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
544 }
545 CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock",
546 	       of_ti_omap5_mpu_dpll_setup);
547 
548 static void __init of_ti_omap4_core_dpll_setup(struct device_node *node)
549 {
550 	const struct dpll_data dd = {
551 		.idlest_mask = 0x1,
552 		.enable_mask = 0x7,
553 		.autoidle_mask = 0x7,
554 		.mult_mask = 0x7ff << 8,
555 		.div1_mask = 0x7f,
556 		.max_multiplier = 2047,
557 		.max_divider = 128,
558 		.min_divider = 1,
559 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
560 	};
561 
562 	of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd);
563 }
564 CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock",
565 	       of_ti_omap4_core_dpll_setup);
566 
567 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
568 	defined(CONFIG_SOC_DRA7XX)
569 static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node)
570 {
571 	const struct dpll_data dd = {
572 		.idlest_mask = 0x1,
573 		.enable_mask = 0x7,
574 		.autoidle_mask = 0x7,
575 		.mult_mask = 0x7ff << 8,
576 		.div1_mask = 0x7f,
577 		.max_multiplier = 2047,
578 		.max_divider = 128,
579 		.min_divider = 1,
580 		.m4xen_mask = 0x800,
581 		.lpmode_mask = 1 << 10,
582 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
583 	};
584 
585 	of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd);
586 }
587 CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock",
588 	       of_ti_omap4_m4xen_dpll_setup);
589 
590 static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node)
591 {
592 	const struct dpll_data dd = {
593 		.idlest_mask = 0x1,
594 		.enable_mask = 0x7,
595 		.autoidle_mask = 0x7,
596 		.mult_mask = 0xfff << 8,
597 		.div1_mask = 0xff,
598 		.max_multiplier = 4095,
599 		.max_divider = 256,
600 		.min_divider = 1,
601 		.sddiv_mask = 0xff << 24,
602 		.flags = DPLL_J_TYPE,
603 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
604 	};
605 
606 	of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd);
607 }
608 CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock",
609 	       of_ti_omap4_jtype_dpll_setup);
610 #endif
611 
612 static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node)
613 {
614 	const struct dpll_data dd = {
615 		.idlest_mask = 0x1,
616 		.enable_mask = 0x7,
617 		.ssc_enable_mask = 0x1 << 12,
618 		.ssc_downspread_mask = 0x1 << 14,
619 		.mult_mask = 0x7ff << 8,
620 		.div1_mask = 0x7f,
621 		.ssc_deltam_int_mask = 0x3 << 18,
622 		.ssc_deltam_frac_mask = 0x3ffff,
623 		.ssc_modfreq_mant_mask = 0x7f,
624 		.ssc_modfreq_exp_mask = 0x7 << 8,
625 		.max_multiplier = 2047,
626 		.max_divider = 128,
627 		.min_divider = 1,
628 		.max_rate = 1000000000,
629 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
630 	};
631 
632 	of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd);
633 }
634 CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock",
635 	       of_ti_am3_no_gate_dpll_setup);
636 
637 static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node)
638 {
639 	const struct dpll_data dd = {
640 		.idlest_mask = 0x1,
641 		.enable_mask = 0x7,
642 		.mult_mask = 0x7ff << 8,
643 		.div1_mask = 0x7f,
644 		.max_multiplier = 4095,
645 		.max_divider = 256,
646 		.min_divider = 2,
647 		.flags = DPLL_J_TYPE,
648 		.max_rate = 2000000000,
649 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
650 	};
651 
652 	of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
653 }
654 CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock",
655 	       of_ti_am3_jtype_dpll_setup);
656 
657 static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node)
658 {
659 	const struct dpll_data dd = {
660 		.idlest_mask = 0x1,
661 		.enable_mask = 0x7,
662 		.mult_mask = 0x7ff << 8,
663 		.div1_mask = 0x7f,
664 		.max_multiplier = 2047,
665 		.max_divider = 128,
666 		.min_divider = 1,
667 		.max_rate = 2000000000,
668 		.flags = DPLL_J_TYPE,
669 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
670 	};
671 
672 	of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd);
673 }
674 CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock,
675 	       "ti,am3-dpll-no-gate-j-type-clock",
676 	       of_ti_am3_no_gate_jtype_dpll_setup);
677 
678 static void __init of_ti_am3_dpll_setup(struct device_node *node)
679 {
680 	const struct dpll_data dd = {
681 		.idlest_mask = 0x1,
682 		.enable_mask = 0x7,
683 		.ssc_enable_mask = 0x1 << 12,
684 		.ssc_downspread_mask = 0x1 << 14,
685 		.mult_mask = 0x7ff << 8,
686 		.div1_mask = 0x7f,
687 		.ssc_deltam_int_mask = 0x3 << 18,
688 		.ssc_deltam_frac_mask = 0x3ffff,
689 		.ssc_modfreq_mant_mask = 0x7f,
690 		.ssc_modfreq_exp_mask = 0x7 << 8,
691 		.max_multiplier = 2047,
692 		.max_divider = 128,
693 		.min_divider = 1,
694 		.max_rate = 1000000000,
695 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
696 	};
697 
698 	of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
699 }
700 CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup);
701 
702 static void __init of_ti_am3_core_dpll_setup(struct device_node *node)
703 {
704 	const struct dpll_data dd = {
705 		.idlest_mask = 0x1,
706 		.enable_mask = 0x7,
707 		.mult_mask = 0x7ff << 8,
708 		.div1_mask = 0x7f,
709 		.max_multiplier = 2047,
710 		.max_divider = 128,
711 		.min_divider = 1,
712 		.max_rate = 1000000000,
713 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
714 	};
715 
716 	of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd);
717 }
718 CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock",
719 	       of_ti_am3_core_dpll_setup);
720 
721 static void __init of_ti_omap2_core_dpll_setup(struct device_node *node)
722 {
723 	const struct dpll_data dd = {
724 		.enable_mask = 0x3,
725 		.mult_mask = 0x3ff << 12,
726 		.div1_mask = 0xf << 8,
727 		.max_divider = 16,
728 		.min_divider = 1,
729 	};
730 
731 	of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd);
732 }
733 CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock",
734 	       of_ti_omap2_core_dpll_setup);
735