xref: /linux/drivers/clk/samsung/clk-pll.h (revision b8e85e6f3a09fc56b0ff574887798962ef8a8f80)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
4  * Copyright (c) 2013 Linaro Ltd.
5  *
6  * Common Clock Framework support for all PLL's in Samsung platforms
7 */
8 
9 #ifndef __SAMSUNG_CLK_PLL_H
10 #define __SAMSUNG_CLK_PLL_H
11 
12 enum samsung_pll_type {
13 	pll_2126,
14 	pll_3000,
15 	pll_35xx,
16 	pll_36xx,
17 	pll_2550,
18 	pll_2650,
19 	pll_4500,
20 	pll_4502,
21 	pll_4508,
22 	pll_4600,
23 	pll_4650,
24 	pll_4650c,
25 	pll_6552,
26 	pll_6552_s3c2416,
27 	pll_6553,
28 	pll_2550x,
29 	pll_2550xx,
30 	pll_2650x,
31 	pll_2650xx,
32 	pll_1417x,
33 	pll_1450x,
34 	pll_1451x,
35 	pll_1452x,
36 	pll_1460x,
37 	pll_0818x,
38 	pll_0822x,
39 	pll_0831x,
40 	pll_142xx,
41 	pll_0516x,
42 	pll_0517x,
43 	pll_0518x,
44 };
45 
46 #define PLL_RATE(_fin, _m, _p, _s, _k, _ks) \
47 	((u64)(_fin) * (BIT(_ks) * (_m) + (_k)) / BIT(_ks) / ((_p) << (_s)))
48 #define PLL_VALID_RATE(_fin, _fout, _m, _p, _s, _k, _ks) ((_fout) + \
49 	BUILD_BUG_ON_ZERO(PLL_RATE(_fin, _m, _p, _s, _k, _ks) != (_fout)))
50 
51 #define PLL_35XX_RATE(_fin, _rate, _m, _p, _s)			\
52 	{							\
53 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
54 				_m, _p, _s, 0, 16),		\
55 		.mdiv	=	(_m),				\
56 		.pdiv	=	(_p),				\
57 		.sdiv	=	(_s),				\
58 	}
59 
60 #define PLL_36XX_RATE(_fin, _rate, _m, _p, _s, _k)		\
61 	{							\
62 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
63 				_m, _p, _s, _k, 16),		\
64 		.mdiv	=	(_m),				\
65 		.pdiv	=	(_p),				\
66 		.sdiv	=	(_s),				\
67 		.kdiv	=	(_k),				\
68 	}
69 
70 #define PLL_4508_RATE(_fin, _rate, _m, _p, _s, _afc)		\
71 	{							\
72 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
73 				_m, _p, _s - 1, 0, 16),		\
74 		.mdiv	=	(_m),				\
75 		.pdiv	=	(_p),				\
76 		.sdiv	=	(_s),				\
77 		.afc	=	(_afc),				\
78 	}
79 
80 #define PLL_4600_RATE(_fin, _rate, _m, _p, _s, _k, _vsel)	\
81 	{							\
82 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
83 				_m, _p, _s, _k, 16),		\
84 		.mdiv	=	(_m),				\
85 		.pdiv	=	(_p),				\
86 		.sdiv	=	(_s),				\
87 		.kdiv	=	(_k),				\
88 		.vsel	=	(_vsel),			\
89 	}
90 
91 #define PLL_4650_RATE(_fin, _rate, _m, _p, _s, _k, _mfr, _mrr, _vsel) \
92 	{							\
93 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
94 				_m, _p, _s, _k, 10),		\
95 		.mdiv	=	(_m),				\
96 		.pdiv	=	(_p),				\
97 		.sdiv	=	(_s),				\
98 		.kdiv	=	(_k),				\
99 		.mfr	=	(_mfr),				\
100 		.mrr	=	(_mrr),				\
101 		.vsel	=	(_vsel),			\
102 	}
103 
104 /* NOTE: Rate table should be kept sorted in descending order. */
105 
106 struct samsung_pll_rate_table {
107 	unsigned int rate;
108 	unsigned int pdiv;
109 	unsigned int mdiv;
110 	unsigned int sdiv;
111 	unsigned int kdiv;
112 	unsigned int afc;
113 	unsigned int mfr;
114 	unsigned int mrr;
115 	unsigned int vsel;
116 };
117 
118 #endif /* __SAMSUNG_CLK_PLL_H */
119