README
1Module options
2--------------
3
4The mwave module takes the following options. Note that these options
5are not saved by the BIOS and so do not persist after unload and reload.
6
7 mwave_3780i_irq=5/7/10/11/15
8 If the dsp irq has not been setup and stored in bios by the
9 thinkpad configuration utility then this parameter allows the
10 irq used by the dsp to be configured.
11
12 mwave_3780i_io=0x130/0x350/0x0070/0xDB0
13 If the dsp io range has not been setup and stored in bios by the
14 thinkpad configuration utility then this parameter allows the
15 io range used by the dsp to be configured.
16
17 mwave_uart_irq=3/4
18 If the mwave's uart irq has not been setup and stored in bios by the
19 thinkpad configuration utility then this parameter allows the
20 irq used by the mwave uart to be configured.
21
22 mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8
23 If the uart io range has not been setup and stored in bios by the
24 thinkpad configuration utility then this parameter allows the
25 io range used by the mwave uart to be configured.
26
27Example to enable the 3780i DSP using ttyS1 resources:
28
29 insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8
30
31Accessing the driver
32--------------------
33
34You must also create a node for the driver:
35 mkdir -p /dev/modems
36 mknod --mode=660 /dev/modems/mwave c 10 219
37
38