1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * ipmi_ssif.c 4 * 5 * The interface to the IPMI driver for SMBus access to a SMBus 6 * compliant device. Called SSIF by the IPMI spec. 7 * 8 * Author: Intel Corporation 9 * Todd Davis <todd.c.davis@intel.com> 10 * 11 * Rewritten by Corey Minyard <minyard@acm.org> to support the 12 * non-blocking I2C interface, add support for multi-part 13 * transactions, add PEC support, and general clenaup. 14 * 15 * Copyright 2003 Intel Corporation 16 * Copyright 2005 MontaVista Software 17 */ 18 19 /* 20 * This file holds the "policy" for the interface to the SSIF state 21 * machine. It does the configuration, handles timers and interrupts, 22 * and drives the real SSIF state machine. 23 */ 24 25 /* 26 * TODO: Figure out how to use SMB alerts. This will require a new 27 * interface into the I2C driver, I believe. 28 */ 29 30 #define pr_fmt(fmt) "ipmi_ssif: " fmt 31 #define dev_fmt(fmt) "ipmi_ssif: " fmt 32 33 #if defined(MODVERSIONS) 34 #include <linux/modversions.h> 35 #endif 36 37 #include <linux/module.h> 38 #include <linux/moduleparam.h> 39 #include <linux/sched.h> 40 #include <linux/seq_file.h> 41 #include <linux/timer.h> 42 #include <linux/delay.h> 43 #include <linux/errno.h> 44 #include <linux/spinlock.h> 45 #include <linux/slab.h> 46 #include <linux/list.h> 47 #include <linux/i2c.h> 48 #include <linux/ipmi_smi.h> 49 #include <linux/init.h> 50 #include <linux/dmi.h> 51 #include <linux/kthread.h> 52 #include <linux/acpi.h> 53 #include <linux/ctype.h> 54 #include <linux/time64.h> 55 #include "ipmi_si_sm.h" 56 #include "ipmi_dmi.h" 57 58 #define DEVICE_NAME "ipmi_ssif" 59 60 #define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD 0x57 61 62 #define SSIF_IPMI_REQUEST 2 63 #define SSIF_IPMI_MULTI_PART_REQUEST_START 6 64 #define SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE 7 65 #define SSIF_IPMI_MULTI_PART_REQUEST_END 8 66 #define SSIF_IPMI_RESPONSE 3 67 #define SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE 9 68 69 /* ssif_debug is a bit-field 70 * SSIF_DEBUG_MSG - commands and their responses 71 * SSIF_DEBUG_STATES - message states 72 * SSIF_DEBUG_TIMING - Measure times between events in the driver 73 */ 74 #define SSIF_DEBUG_TIMING 4 75 #define SSIF_DEBUG_STATE 2 76 #define SSIF_DEBUG_MSG 1 77 #define SSIF_NODEBUG 0 78 #define SSIF_DEFAULT_DEBUG (SSIF_NODEBUG) 79 80 /* 81 * Timer values 82 */ 83 #define SSIF_MSG_USEC 20000 /* 20ms between message tries. */ 84 #define SSIF_MSG_PART_USEC 5000 /* 5ms for a message part */ 85 86 /* How many times to we retry sending/receiving the message. */ 87 #define SSIF_SEND_RETRIES 5 88 #define SSIF_RECV_RETRIES 250 89 90 #define SSIF_MSG_MSEC (SSIF_MSG_USEC / 1000) 91 #define SSIF_MSG_JIFFIES ((SSIF_MSG_USEC * 1000) / TICK_NSEC) 92 #define SSIF_MSG_PART_JIFFIES ((SSIF_MSG_PART_USEC * 1000) / TICK_NSEC) 93 94 /* 95 * Timeout for the watch, only used for get flag timer. 96 */ 97 #define SSIF_WATCH_MSG_TIMEOUT msecs_to_jiffies(10) 98 #define SSIF_WATCH_WATCHDOG_TIMEOUT msecs_to_jiffies(250) 99 100 enum ssif_intf_state { 101 SSIF_NORMAL, 102 SSIF_GETTING_FLAGS, 103 SSIF_GETTING_EVENTS, 104 SSIF_CLEARING_FLAGS, 105 SSIF_GETTING_MESSAGES, 106 /* FIXME - add watchdog stuff. */ 107 }; 108 109 #define SSIF_IDLE(ssif) ((ssif)->ssif_state == SSIF_NORMAL \ 110 && (ssif)->curr_msg == NULL) 111 112 /* 113 * Indexes into stats[] in ssif_info below. 114 */ 115 enum ssif_stat_indexes { 116 /* Number of total messages sent. */ 117 SSIF_STAT_sent_messages = 0, 118 119 /* 120 * Number of message parts sent. Messages may be broken into 121 * parts if they are long. 122 */ 123 SSIF_STAT_sent_messages_parts, 124 125 /* 126 * Number of time a message was retried. 127 */ 128 SSIF_STAT_send_retries, 129 130 /* 131 * Number of times the send of a message failed. 132 */ 133 SSIF_STAT_send_errors, 134 135 /* 136 * Number of message responses received. 137 */ 138 SSIF_STAT_received_messages, 139 140 /* 141 * Number of message fragments received. 142 */ 143 SSIF_STAT_received_message_parts, 144 145 /* 146 * Number of times the receive of a message was retried. 147 */ 148 SSIF_STAT_receive_retries, 149 150 /* 151 * Number of errors receiving messages. 152 */ 153 SSIF_STAT_receive_errors, 154 155 /* 156 * Number of times a flag fetch was requested. 157 */ 158 SSIF_STAT_flag_fetches, 159 160 /* 161 * Number of times the hardware didn't follow the state machine. 162 */ 163 SSIF_STAT_hosed, 164 165 /* 166 * Number of received events. 167 */ 168 SSIF_STAT_events, 169 170 /* Number of asyncronous messages received. */ 171 SSIF_STAT_incoming_messages, 172 173 /* Number of watchdog pretimeouts. */ 174 SSIF_STAT_watchdog_pretimeouts, 175 176 /* Number of alers received. */ 177 SSIF_STAT_alerts, 178 179 /* Always add statistics before this value, it must be last. */ 180 SSIF_NUM_STATS 181 }; 182 183 struct ssif_addr_info { 184 struct i2c_board_info binfo; 185 char *adapter_name; 186 int debug; 187 int slave_addr; 188 enum ipmi_addr_src addr_src; 189 union ipmi_smi_info_union addr_info; 190 struct device *dev; 191 struct i2c_client *client; 192 193 struct i2c_client *added_client; 194 195 struct mutex clients_mutex; 196 struct list_head clients; 197 198 struct list_head link; 199 }; 200 201 struct ssif_info; 202 203 typedef void (*ssif_i2c_done)(struct ssif_info *ssif_info, int result, 204 unsigned char *data, unsigned int len); 205 206 struct ssif_info { 207 struct ipmi_smi *intf; 208 spinlock_t lock; 209 struct ipmi_smi_msg *waiting_msg; 210 struct ipmi_smi_msg *curr_msg; 211 enum ssif_intf_state ssif_state; 212 unsigned long ssif_debug; 213 214 struct ipmi_smi_handlers handlers; 215 216 enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */ 217 union ipmi_smi_info_union addr_info; 218 219 /* 220 * Flags from the last GET_MSG_FLAGS command, used when an ATTN 221 * is set to hold the flags until we are done handling everything 222 * from the flags. 223 */ 224 #define RECEIVE_MSG_AVAIL 0x01 225 #define EVENT_MSG_BUFFER_FULL 0x02 226 #define WDT_PRE_TIMEOUT_INT 0x08 227 unsigned char msg_flags; 228 229 u8 global_enables; 230 bool has_event_buffer; 231 bool supports_alert; 232 233 /* 234 * Used to tell what we should do with alerts. If we are 235 * waiting on a response, read the data immediately. 236 */ 237 bool got_alert; 238 bool waiting_alert; 239 240 /* 241 * If set to true, this will request events the next time the 242 * state machine is idle. 243 */ 244 bool req_events; 245 246 /* 247 * If set to true, this will request flags the next time the 248 * state machine is idle. 249 */ 250 bool req_flags; 251 252 /* 253 * Used to perform timer operations when run-to-completion 254 * mode is on. This is a countdown timer. 255 */ 256 int rtc_us_timer; 257 258 /* Used for sending/receiving data. +1 for the length. */ 259 unsigned char data[IPMI_MAX_MSG_LENGTH + 1]; 260 unsigned int data_len; 261 262 /* Temp receive buffer, gets copied into data. */ 263 unsigned char recv[I2C_SMBUS_BLOCK_MAX]; 264 265 struct i2c_client *client; 266 ssif_i2c_done done_handler; 267 268 /* Thread interface handling */ 269 struct task_struct *thread; 270 struct completion wake_thread; 271 bool stopping; 272 int i2c_read_write; 273 int i2c_command; 274 unsigned char *i2c_data; 275 unsigned int i2c_size; 276 277 struct timer_list retry_timer; 278 int retries_left; 279 280 long watch_timeout; /* Timeout for flags check, 0 if off. */ 281 struct timer_list watch_timer; /* Flag fetch timer. */ 282 283 /* Info from SSIF cmd */ 284 unsigned char max_xmit_msg_size; 285 unsigned char max_recv_msg_size; 286 bool cmd8_works; /* See test_multipart_messages() for details. */ 287 unsigned int multi_support; 288 int supports_pec; 289 290 #define SSIF_NO_MULTI 0 291 #define SSIF_MULTI_2_PART 1 292 #define SSIF_MULTI_n_PART 2 293 unsigned char *multi_data; 294 unsigned int multi_len; 295 unsigned int multi_pos; 296 297 atomic_t stats[SSIF_NUM_STATS]; 298 }; 299 300 #define ssif_inc_stat(ssif, stat) \ 301 atomic_inc(&(ssif)->stats[SSIF_STAT_ ## stat]) 302 #define ssif_get_stat(ssif, stat) \ 303 ((unsigned int) atomic_read(&(ssif)->stats[SSIF_STAT_ ## stat])) 304 305 static bool initialized; 306 307 static void return_hosed_msg(struct ssif_info *ssif_info, 308 struct ipmi_smi_msg *msg); 309 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags); 310 static int start_send(struct ssif_info *ssif_info, 311 unsigned char *data, 312 unsigned int len); 313 314 static unsigned long *ipmi_ssif_lock_cond(struct ssif_info *ssif_info, 315 unsigned long *flags) 316 { 317 spin_lock_irqsave(&ssif_info->lock, *flags); 318 return flags; 319 } 320 321 static void ipmi_ssif_unlock_cond(struct ssif_info *ssif_info, 322 unsigned long *flags) 323 { 324 spin_unlock_irqrestore(&ssif_info->lock, *flags); 325 } 326 327 static void deliver_recv_msg(struct ssif_info *ssif_info, 328 struct ipmi_smi_msg *msg) 329 { 330 if (msg->rsp_size < 0) { 331 return_hosed_msg(ssif_info, msg); 332 dev_err(&ssif_info->client->dev, 333 "%s: Malformed message: rsp_size = %d\n", 334 __func__, msg->rsp_size); 335 } else { 336 ipmi_smi_msg_received(ssif_info->intf, msg); 337 } 338 } 339 340 static void return_hosed_msg(struct ssif_info *ssif_info, 341 struct ipmi_smi_msg *msg) 342 { 343 ssif_inc_stat(ssif_info, hosed); 344 345 /* Make it a response */ 346 msg->rsp[0] = msg->data[0] | 4; 347 msg->rsp[1] = msg->data[1]; 348 msg->rsp[2] = 0xFF; /* Unknown error. */ 349 msg->rsp_size = 3; 350 351 deliver_recv_msg(ssif_info, msg); 352 } 353 354 /* 355 * Must be called with the message lock held. This will release the 356 * message lock. Note that the caller will check SSIF_IDLE and start a 357 * new operation, so there is no need to check for new messages to 358 * start in here. 359 */ 360 static void start_clear_flags(struct ssif_info *ssif_info, unsigned long *flags) 361 { 362 unsigned char msg[3]; 363 364 ssif_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT; 365 ssif_info->ssif_state = SSIF_CLEARING_FLAGS; 366 ipmi_ssif_unlock_cond(ssif_info, flags); 367 368 /* Make sure the watchdog pre-timeout flag is not set at startup. */ 369 msg[0] = (IPMI_NETFN_APP_REQUEST << 2); 370 msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; 371 msg[2] = WDT_PRE_TIMEOUT_INT; 372 373 if (start_send(ssif_info, msg, 3) != 0) { 374 /* Error, just go to normal state. */ 375 ssif_info->ssif_state = SSIF_NORMAL; 376 } 377 } 378 379 static void start_flag_fetch(struct ssif_info *ssif_info, unsigned long *flags) 380 { 381 unsigned char mb[2]; 382 383 ssif_info->req_flags = false; 384 ssif_info->ssif_state = SSIF_GETTING_FLAGS; 385 ipmi_ssif_unlock_cond(ssif_info, flags); 386 387 mb[0] = (IPMI_NETFN_APP_REQUEST << 2); 388 mb[1] = IPMI_GET_MSG_FLAGS_CMD; 389 if (start_send(ssif_info, mb, 2) != 0) 390 ssif_info->ssif_state = SSIF_NORMAL; 391 } 392 393 static void check_start_send(struct ssif_info *ssif_info, unsigned long *flags, 394 struct ipmi_smi_msg *msg) 395 { 396 if (start_send(ssif_info, msg->data, msg->data_size) != 0) { 397 unsigned long oflags; 398 399 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 400 ssif_info->curr_msg = NULL; 401 ssif_info->ssif_state = SSIF_NORMAL; 402 ipmi_ssif_unlock_cond(ssif_info, flags); 403 ipmi_free_smi_msg(msg); 404 } 405 } 406 407 static void start_event_fetch(struct ssif_info *ssif_info, unsigned long *flags) 408 { 409 struct ipmi_smi_msg *msg; 410 411 ssif_info->req_events = false; 412 413 msg = ipmi_alloc_smi_msg(); 414 if (!msg) { 415 ssif_info->ssif_state = SSIF_NORMAL; 416 ipmi_ssif_unlock_cond(ssif_info, flags); 417 return; 418 } 419 420 ssif_info->curr_msg = msg; 421 ssif_info->ssif_state = SSIF_GETTING_EVENTS; 422 ipmi_ssif_unlock_cond(ssif_info, flags); 423 424 msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); 425 msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD; 426 msg->data_size = 2; 427 428 check_start_send(ssif_info, flags, msg); 429 } 430 431 static void start_recv_msg_fetch(struct ssif_info *ssif_info, 432 unsigned long *flags) 433 { 434 struct ipmi_smi_msg *msg; 435 436 msg = ipmi_alloc_smi_msg(); 437 if (!msg) { 438 ssif_info->ssif_state = SSIF_NORMAL; 439 ipmi_ssif_unlock_cond(ssif_info, flags); 440 return; 441 } 442 443 ssif_info->curr_msg = msg; 444 ssif_info->ssif_state = SSIF_GETTING_MESSAGES; 445 ipmi_ssif_unlock_cond(ssif_info, flags); 446 447 msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); 448 msg->data[1] = IPMI_GET_MSG_CMD; 449 msg->data_size = 2; 450 451 check_start_send(ssif_info, flags, msg); 452 } 453 454 /* 455 * Must be called with the message lock held. This will release the 456 * message lock. Note that the caller will check SSIF_IDLE and start a 457 * new operation, so there is no need to check for new messages to 458 * start in here. 459 */ 460 static void handle_flags(struct ssif_info *ssif_info, unsigned long *flags) 461 { 462 if (ssif_info->msg_flags & WDT_PRE_TIMEOUT_INT) { 463 /* Watchdog pre-timeout */ 464 ssif_inc_stat(ssif_info, watchdog_pretimeouts); 465 start_clear_flags(ssif_info, flags); 466 ipmi_smi_watchdog_pretimeout(ssif_info->intf); 467 } else if (ssif_info->msg_flags & RECEIVE_MSG_AVAIL) 468 /* Messages available. */ 469 start_recv_msg_fetch(ssif_info, flags); 470 else if (ssif_info->msg_flags & EVENT_MSG_BUFFER_FULL) 471 /* Events available. */ 472 start_event_fetch(ssif_info, flags); 473 else { 474 ssif_info->ssif_state = SSIF_NORMAL; 475 ipmi_ssif_unlock_cond(ssif_info, flags); 476 } 477 } 478 479 static int ipmi_ssif_thread(void *data) 480 { 481 struct ssif_info *ssif_info = data; 482 483 while (!kthread_should_stop()) { 484 int result; 485 486 /* Wait for something to do */ 487 result = wait_for_completion_interruptible( 488 &ssif_info->wake_thread); 489 if (ssif_info->stopping) 490 break; 491 if (result == -ERESTARTSYS) 492 continue; 493 init_completion(&ssif_info->wake_thread); 494 495 if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) { 496 result = i2c_smbus_write_block_data( 497 ssif_info->client, ssif_info->i2c_command, 498 ssif_info->i2c_data[0], 499 ssif_info->i2c_data + 1); 500 ssif_info->done_handler(ssif_info, result, NULL, 0); 501 } else { 502 result = i2c_smbus_read_block_data( 503 ssif_info->client, ssif_info->i2c_command, 504 ssif_info->i2c_data); 505 if (result < 0) 506 ssif_info->done_handler(ssif_info, result, 507 NULL, 0); 508 else 509 ssif_info->done_handler(ssif_info, 0, 510 ssif_info->i2c_data, 511 result); 512 } 513 } 514 515 return 0; 516 } 517 518 static int ssif_i2c_send(struct ssif_info *ssif_info, 519 ssif_i2c_done handler, 520 int read_write, int command, 521 unsigned char *data, unsigned int size) 522 { 523 ssif_info->done_handler = handler; 524 525 ssif_info->i2c_read_write = read_write; 526 ssif_info->i2c_command = command; 527 ssif_info->i2c_data = data; 528 ssif_info->i2c_size = size; 529 complete(&ssif_info->wake_thread); 530 return 0; 531 } 532 533 534 static void msg_done_handler(struct ssif_info *ssif_info, int result, 535 unsigned char *data, unsigned int len); 536 537 static void start_get(struct ssif_info *ssif_info) 538 { 539 int rv; 540 541 ssif_info->rtc_us_timer = 0; 542 ssif_info->multi_pos = 0; 543 544 rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, 545 SSIF_IPMI_RESPONSE, 546 ssif_info->recv, I2C_SMBUS_BLOCK_DATA); 547 if (rv < 0) { 548 /* request failed, just return the error. */ 549 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 550 dev_dbg(&ssif_info->client->dev, 551 "Error from i2c_non_blocking_op(5)\n"); 552 553 msg_done_handler(ssif_info, -EIO, NULL, 0); 554 } 555 } 556 557 static void retry_timeout(struct timer_list *t) 558 { 559 struct ssif_info *ssif_info = from_timer(ssif_info, t, retry_timer); 560 unsigned long oflags, *flags; 561 bool waiting; 562 563 if (ssif_info->stopping) 564 return; 565 566 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 567 waiting = ssif_info->waiting_alert; 568 ssif_info->waiting_alert = false; 569 ipmi_ssif_unlock_cond(ssif_info, flags); 570 571 if (waiting) 572 start_get(ssif_info); 573 } 574 575 static void watch_timeout(struct timer_list *t) 576 { 577 struct ssif_info *ssif_info = from_timer(ssif_info, t, watch_timer); 578 unsigned long oflags, *flags; 579 580 if (ssif_info->stopping) 581 return; 582 583 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 584 if (ssif_info->watch_timeout) { 585 mod_timer(&ssif_info->watch_timer, 586 jiffies + ssif_info->watch_timeout); 587 if (SSIF_IDLE(ssif_info)) { 588 start_flag_fetch(ssif_info, flags); /* Releases lock */ 589 return; 590 } 591 ssif_info->req_flags = true; 592 } 593 ipmi_ssif_unlock_cond(ssif_info, flags); 594 } 595 596 static void ssif_alert(struct i2c_client *client, enum i2c_alert_protocol type, 597 unsigned int data) 598 { 599 struct ssif_info *ssif_info = i2c_get_clientdata(client); 600 unsigned long oflags, *flags; 601 bool do_get = false; 602 603 if (type != I2C_PROTOCOL_SMBUS_ALERT) 604 return; 605 606 ssif_inc_stat(ssif_info, alerts); 607 608 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 609 if (ssif_info->waiting_alert) { 610 ssif_info->waiting_alert = false; 611 del_timer(&ssif_info->retry_timer); 612 do_get = true; 613 } else if (ssif_info->curr_msg) { 614 ssif_info->got_alert = true; 615 } 616 ipmi_ssif_unlock_cond(ssif_info, flags); 617 if (do_get) 618 start_get(ssif_info); 619 } 620 621 static int start_resend(struct ssif_info *ssif_info); 622 623 static void msg_done_handler(struct ssif_info *ssif_info, int result, 624 unsigned char *data, unsigned int len) 625 { 626 struct ipmi_smi_msg *msg; 627 unsigned long oflags, *flags; 628 int rv; 629 630 /* 631 * We are single-threaded here, so no need for a lock until we 632 * start messing with driver states or the queues. 633 */ 634 635 if (result < 0) { 636 ssif_info->retries_left--; 637 if (ssif_info->retries_left > 0) { 638 ssif_inc_stat(ssif_info, receive_retries); 639 640 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 641 ssif_info->waiting_alert = true; 642 ssif_info->rtc_us_timer = SSIF_MSG_USEC; 643 if (!ssif_info->stopping) 644 mod_timer(&ssif_info->retry_timer, 645 jiffies + SSIF_MSG_JIFFIES); 646 ipmi_ssif_unlock_cond(ssif_info, flags); 647 return; 648 } 649 650 ssif_inc_stat(ssif_info, receive_errors); 651 652 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 653 dev_dbg(&ssif_info->client->dev, 654 "%s: Error %d\n", __func__, result); 655 len = 0; 656 goto continue_op; 657 } 658 659 if ((len > 1) && (ssif_info->multi_pos == 0) 660 && (data[0] == 0x00) && (data[1] == 0x01)) { 661 /* Start of multi-part read. Start the next transaction. */ 662 int i; 663 664 ssif_inc_stat(ssif_info, received_message_parts); 665 666 /* Remove the multi-part read marker. */ 667 len -= 2; 668 data += 2; 669 for (i = 0; i < len; i++) 670 ssif_info->data[i] = data[i]; 671 ssif_info->multi_len = len; 672 ssif_info->multi_pos = 1; 673 674 rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, 675 SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, 676 ssif_info->recv, I2C_SMBUS_BLOCK_DATA); 677 if (rv < 0) { 678 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 679 dev_dbg(&ssif_info->client->dev, 680 "Error from i2c_non_blocking_op(1)\n"); 681 682 result = -EIO; 683 } else 684 return; 685 } else if (ssif_info->multi_pos) { 686 /* Middle of multi-part read. Start the next transaction. */ 687 int i; 688 unsigned char blocknum; 689 690 if (len == 0) { 691 result = -EIO; 692 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 693 dev_dbg(&ssif_info->client->dev, 694 "Middle message with no data\n"); 695 696 goto continue_op; 697 } 698 699 blocknum = data[0]; 700 len--; 701 data++; 702 703 if (blocknum != 0xff && len != 31) { 704 /* All blocks but the last must have 31 data bytes. */ 705 result = -EIO; 706 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 707 dev_dbg(&ssif_info->client->dev, 708 "Received middle message <31\n"); 709 710 goto continue_op; 711 } 712 713 if (ssif_info->multi_len + len > IPMI_MAX_MSG_LENGTH) { 714 /* Received message too big, abort the operation. */ 715 result = -E2BIG; 716 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 717 dev_dbg(&ssif_info->client->dev, 718 "Received message too big\n"); 719 720 goto continue_op; 721 } 722 723 for (i = 0; i < len; i++) 724 ssif_info->data[i + ssif_info->multi_len] = data[i]; 725 ssif_info->multi_len += len; 726 if (blocknum == 0xff) { 727 /* End of read */ 728 len = ssif_info->multi_len; 729 data = ssif_info->data; 730 } else if (blocknum + 1 != ssif_info->multi_pos) { 731 /* 732 * Out of sequence block, just abort. Block 733 * numbers start at zero for the second block, 734 * but multi_pos starts at one, so the +1. 735 */ 736 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 737 dev_dbg(&ssif_info->client->dev, 738 "Received message out of sequence, expected %u, got %u\n", 739 ssif_info->multi_pos - 1, blocknum); 740 result = -EIO; 741 } else { 742 ssif_inc_stat(ssif_info, received_message_parts); 743 744 ssif_info->multi_pos++; 745 746 rv = ssif_i2c_send(ssif_info, msg_done_handler, 747 I2C_SMBUS_READ, 748 SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, 749 ssif_info->recv, 750 I2C_SMBUS_BLOCK_DATA); 751 if (rv < 0) { 752 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 753 dev_dbg(&ssif_info->client->dev, 754 "Error from ssif_i2c_send\n"); 755 756 result = -EIO; 757 } else 758 return; 759 } 760 } 761 762 continue_op: 763 if (result < 0) { 764 ssif_inc_stat(ssif_info, receive_errors); 765 } else { 766 ssif_inc_stat(ssif_info, received_messages); 767 ssif_inc_stat(ssif_info, received_message_parts); 768 } 769 770 if (ssif_info->ssif_debug & SSIF_DEBUG_STATE) 771 dev_dbg(&ssif_info->client->dev, 772 "DONE 1: state = %d, result=%d\n", 773 ssif_info->ssif_state, result); 774 775 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 776 msg = ssif_info->curr_msg; 777 if (msg) { 778 msg->rsp_size = len; 779 if (msg->rsp_size > IPMI_MAX_MSG_LENGTH) 780 msg->rsp_size = IPMI_MAX_MSG_LENGTH; 781 memcpy(msg->rsp, data, msg->rsp_size); 782 ssif_info->curr_msg = NULL; 783 } 784 785 switch (ssif_info->ssif_state) { 786 case SSIF_NORMAL: 787 ipmi_ssif_unlock_cond(ssif_info, flags); 788 if (!msg) 789 break; 790 791 if (result < 0) 792 return_hosed_msg(ssif_info, msg); 793 else 794 deliver_recv_msg(ssif_info, msg); 795 break; 796 797 case SSIF_GETTING_FLAGS: 798 /* We got the flags from the SSIF, now handle them. */ 799 if ((result < 0) || (len < 4) || (data[2] != 0)) { 800 /* 801 * Error fetching flags, or invalid length, 802 * just give up for now. 803 */ 804 ssif_info->ssif_state = SSIF_NORMAL; 805 ipmi_ssif_unlock_cond(ssif_info, flags); 806 dev_warn(&ssif_info->client->dev, 807 "Error getting flags: %d %d, %x\n", 808 result, len, (len >= 3) ? data[2] : 0); 809 } else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 810 || data[1] != IPMI_GET_MSG_FLAGS_CMD) { 811 /* 812 * Don't abort here, maybe it was a queued 813 * response to a previous command. 814 */ 815 ipmi_ssif_unlock_cond(ssif_info, flags); 816 dev_warn(&ssif_info->client->dev, 817 "Invalid response getting flags: %x %x\n", 818 data[0], data[1]); 819 } else { 820 ssif_inc_stat(ssif_info, flag_fetches); 821 ssif_info->msg_flags = data[3]; 822 handle_flags(ssif_info, flags); 823 } 824 break; 825 826 case SSIF_CLEARING_FLAGS: 827 /* We cleared the flags. */ 828 if ((result < 0) || (len < 3) || (data[2] != 0)) { 829 /* Error clearing flags */ 830 dev_warn(&ssif_info->client->dev, 831 "Error clearing flags: %d %d, %x\n", 832 result, len, (len >= 3) ? data[2] : 0); 833 } else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 834 || data[1] != IPMI_CLEAR_MSG_FLAGS_CMD) { 835 dev_warn(&ssif_info->client->dev, 836 "Invalid response clearing flags: %x %x\n", 837 data[0], data[1]); 838 } 839 ssif_info->ssif_state = SSIF_NORMAL; 840 ipmi_ssif_unlock_cond(ssif_info, flags); 841 break; 842 843 case SSIF_GETTING_EVENTS: 844 if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { 845 /* Error getting event, probably done. */ 846 msg->done(msg); 847 848 /* Take off the event flag. */ 849 ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; 850 handle_flags(ssif_info, flags); 851 } else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 852 || msg->rsp[1] != IPMI_READ_EVENT_MSG_BUFFER_CMD) { 853 dev_warn(&ssif_info->client->dev, 854 "Invalid response getting events: %x %x\n", 855 msg->rsp[0], msg->rsp[1]); 856 msg->done(msg); 857 /* Take off the event flag. */ 858 ssif_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; 859 handle_flags(ssif_info, flags); 860 } else { 861 handle_flags(ssif_info, flags); 862 ssif_inc_stat(ssif_info, events); 863 deliver_recv_msg(ssif_info, msg); 864 } 865 break; 866 867 case SSIF_GETTING_MESSAGES: 868 if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { 869 /* Error getting event, probably done. */ 870 msg->done(msg); 871 872 /* Take off the msg flag. */ 873 ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL; 874 handle_flags(ssif_info, flags); 875 } else if (msg->rsp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 876 || msg->rsp[1] != IPMI_GET_MSG_CMD) { 877 dev_warn(&ssif_info->client->dev, 878 "Invalid response clearing flags: %x %x\n", 879 msg->rsp[0], msg->rsp[1]); 880 msg->done(msg); 881 882 /* Take off the msg flag. */ 883 ssif_info->msg_flags &= ~RECEIVE_MSG_AVAIL; 884 handle_flags(ssif_info, flags); 885 } else { 886 ssif_inc_stat(ssif_info, incoming_messages); 887 handle_flags(ssif_info, flags); 888 deliver_recv_msg(ssif_info, msg); 889 } 890 break; 891 } 892 893 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 894 if (SSIF_IDLE(ssif_info) && !ssif_info->stopping) { 895 if (ssif_info->req_events) 896 start_event_fetch(ssif_info, flags); 897 else if (ssif_info->req_flags) 898 start_flag_fetch(ssif_info, flags); 899 else 900 start_next_msg(ssif_info, flags); 901 } else 902 ipmi_ssif_unlock_cond(ssif_info, flags); 903 904 if (ssif_info->ssif_debug & SSIF_DEBUG_STATE) 905 dev_dbg(&ssif_info->client->dev, 906 "DONE 2: state = %d.\n", ssif_info->ssif_state); 907 } 908 909 static void msg_written_handler(struct ssif_info *ssif_info, int result, 910 unsigned char *data, unsigned int len) 911 { 912 int rv; 913 914 /* We are single-threaded here, so no need for a lock. */ 915 if (result < 0) { 916 ssif_info->retries_left--; 917 if (ssif_info->retries_left > 0) { 918 if (!start_resend(ssif_info)) { 919 ssif_inc_stat(ssif_info, send_retries); 920 return; 921 } 922 /* request failed, just return the error. */ 923 ssif_inc_stat(ssif_info, send_errors); 924 925 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 926 dev_dbg(&ssif_info->client->dev, 927 "%s: Out of retries\n", __func__); 928 msg_done_handler(ssif_info, -EIO, NULL, 0); 929 return; 930 } 931 932 ssif_inc_stat(ssif_info, send_errors); 933 934 /* 935 * Got an error on transmit, let the done routine 936 * handle it. 937 */ 938 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 939 dev_dbg(&ssif_info->client->dev, 940 "%s: Error %d\n", __func__, result); 941 942 msg_done_handler(ssif_info, result, NULL, 0); 943 return; 944 } 945 946 if (ssif_info->multi_data) { 947 /* 948 * In the middle of a multi-data write. See the comment 949 * in the SSIF_MULTI_n_PART case in the probe function 950 * for details on the intricacies of this. 951 */ 952 int left, to_write; 953 unsigned char *data_to_send; 954 unsigned char cmd; 955 956 ssif_inc_stat(ssif_info, sent_messages_parts); 957 958 left = ssif_info->multi_len - ssif_info->multi_pos; 959 to_write = left; 960 if (to_write > 32) 961 to_write = 32; 962 /* Length byte. */ 963 ssif_info->multi_data[ssif_info->multi_pos] = to_write; 964 data_to_send = ssif_info->multi_data + ssif_info->multi_pos; 965 ssif_info->multi_pos += to_write; 966 cmd = SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE; 967 if (ssif_info->cmd8_works) { 968 if (left == to_write) { 969 cmd = SSIF_IPMI_MULTI_PART_REQUEST_END; 970 ssif_info->multi_data = NULL; 971 } 972 } else if (to_write < 32) { 973 ssif_info->multi_data = NULL; 974 } 975 976 rv = ssif_i2c_send(ssif_info, msg_written_handler, 977 I2C_SMBUS_WRITE, cmd, 978 data_to_send, I2C_SMBUS_BLOCK_DATA); 979 if (rv < 0) { 980 /* request failed, just return the error. */ 981 ssif_inc_stat(ssif_info, send_errors); 982 983 if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) 984 dev_dbg(&ssif_info->client->dev, 985 "Error from i2c_non_blocking_op(3)\n"); 986 msg_done_handler(ssif_info, -EIO, NULL, 0); 987 } 988 } else { 989 /* Ready to request the result. */ 990 unsigned long oflags, *flags; 991 992 ssif_inc_stat(ssif_info, sent_messages); 993 ssif_inc_stat(ssif_info, sent_messages_parts); 994 995 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 996 if (ssif_info->got_alert) { 997 /* The result is already ready, just start it. */ 998 ssif_info->got_alert = false; 999 ipmi_ssif_unlock_cond(ssif_info, flags); 1000 start_get(ssif_info); 1001 } else { 1002 /* Wait a jiffie then request the next message */ 1003 ssif_info->waiting_alert = true; 1004 ssif_info->retries_left = SSIF_RECV_RETRIES; 1005 ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC; 1006 if (!ssif_info->stopping) 1007 mod_timer(&ssif_info->retry_timer, 1008 jiffies + SSIF_MSG_PART_JIFFIES); 1009 ipmi_ssif_unlock_cond(ssif_info, flags); 1010 } 1011 } 1012 } 1013 1014 static int start_resend(struct ssif_info *ssif_info) 1015 { 1016 int rv; 1017 int command; 1018 1019 ssif_info->got_alert = false; 1020 1021 if (ssif_info->data_len > 32) { 1022 command = SSIF_IPMI_MULTI_PART_REQUEST_START; 1023 ssif_info->multi_data = ssif_info->data; 1024 ssif_info->multi_len = ssif_info->data_len; 1025 /* 1026 * Subtle thing, this is 32, not 33, because we will 1027 * overwrite the thing at position 32 (which was just 1028 * transmitted) with the new length. 1029 */ 1030 ssif_info->multi_pos = 32; 1031 ssif_info->data[0] = 32; 1032 } else { 1033 ssif_info->multi_data = NULL; 1034 command = SSIF_IPMI_REQUEST; 1035 ssif_info->data[0] = ssif_info->data_len; 1036 } 1037 1038 rv = ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE, 1039 command, ssif_info->data, I2C_SMBUS_BLOCK_DATA); 1040 if (rv && (ssif_info->ssif_debug & SSIF_DEBUG_MSG)) 1041 dev_dbg(&ssif_info->client->dev, 1042 "Error from i2c_non_blocking_op(4)\n"); 1043 return rv; 1044 } 1045 1046 static int start_send(struct ssif_info *ssif_info, 1047 unsigned char *data, 1048 unsigned int len) 1049 { 1050 if (len > IPMI_MAX_MSG_LENGTH) 1051 return -E2BIG; 1052 if (len > ssif_info->max_xmit_msg_size) 1053 return -E2BIG; 1054 1055 ssif_info->retries_left = SSIF_SEND_RETRIES; 1056 memcpy(ssif_info->data + 1, data, len); 1057 ssif_info->data_len = len; 1058 return start_resend(ssif_info); 1059 } 1060 1061 /* Must be called with the message lock held. */ 1062 static void start_next_msg(struct ssif_info *ssif_info, unsigned long *flags) 1063 { 1064 struct ipmi_smi_msg *msg; 1065 unsigned long oflags; 1066 1067 restart: 1068 if (!SSIF_IDLE(ssif_info)) { 1069 ipmi_ssif_unlock_cond(ssif_info, flags); 1070 return; 1071 } 1072 1073 if (!ssif_info->waiting_msg) { 1074 ssif_info->curr_msg = NULL; 1075 ipmi_ssif_unlock_cond(ssif_info, flags); 1076 } else { 1077 int rv; 1078 1079 ssif_info->curr_msg = ssif_info->waiting_msg; 1080 ssif_info->waiting_msg = NULL; 1081 ipmi_ssif_unlock_cond(ssif_info, flags); 1082 rv = start_send(ssif_info, 1083 ssif_info->curr_msg->data, 1084 ssif_info->curr_msg->data_size); 1085 if (rv) { 1086 msg = ssif_info->curr_msg; 1087 ssif_info->curr_msg = NULL; 1088 return_hosed_msg(ssif_info, msg); 1089 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1090 goto restart; 1091 } 1092 } 1093 } 1094 1095 static void sender(void *send_info, 1096 struct ipmi_smi_msg *msg) 1097 { 1098 struct ssif_info *ssif_info = (struct ssif_info *) send_info; 1099 unsigned long oflags, *flags; 1100 1101 BUG_ON(ssif_info->waiting_msg); 1102 ssif_info->waiting_msg = msg; 1103 1104 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1105 start_next_msg(ssif_info, flags); 1106 1107 if (ssif_info->ssif_debug & SSIF_DEBUG_TIMING) { 1108 struct timespec64 t; 1109 1110 ktime_get_real_ts64(&t); 1111 dev_dbg(&ssif_info->client->dev, 1112 "**Enqueue %02x %02x: %lld.%6.6ld\n", 1113 msg->data[0], msg->data[1], 1114 (long long)t.tv_sec, (long)t.tv_nsec / NSEC_PER_USEC); 1115 } 1116 } 1117 1118 static int get_smi_info(void *send_info, struct ipmi_smi_info *data) 1119 { 1120 struct ssif_info *ssif_info = send_info; 1121 1122 data->addr_src = ssif_info->addr_source; 1123 data->dev = &ssif_info->client->dev; 1124 data->addr_info = ssif_info->addr_info; 1125 get_device(data->dev); 1126 1127 return 0; 1128 } 1129 1130 /* 1131 * Upper layer wants us to request events. 1132 */ 1133 static void request_events(void *send_info) 1134 { 1135 struct ssif_info *ssif_info = (struct ssif_info *) send_info; 1136 unsigned long oflags, *flags; 1137 1138 if (!ssif_info->has_event_buffer) 1139 return; 1140 1141 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1142 ssif_info->req_events = true; 1143 ipmi_ssif_unlock_cond(ssif_info, flags); 1144 } 1145 1146 /* 1147 * Upper layer is changing the flag saying whether we need to request 1148 * flags periodically or not. 1149 */ 1150 static void ssif_set_need_watch(void *send_info, unsigned int watch_mask) 1151 { 1152 struct ssif_info *ssif_info = (struct ssif_info *) send_info; 1153 unsigned long oflags, *flags; 1154 long timeout = 0; 1155 1156 if (watch_mask & IPMI_WATCH_MASK_CHECK_MESSAGES) 1157 timeout = SSIF_WATCH_MSG_TIMEOUT; 1158 else if (watch_mask) 1159 timeout = SSIF_WATCH_WATCHDOG_TIMEOUT; 1160 1161 flags = ipmi_ssif_lock_cond(ssif_info, &oflags); 1162 if (timeout != ssif_info->watch_timeout) { 1163 ssif_info->watch_timeout = timeout; 1164 if (ssif_info->watch_timeout) 1165 mod_timer(&ssif_info->watch_timer, 1166 jiffies + ssif_info->watch_timeout); 1167 } 1168 ipmi_ssif_unlock_cond(ssif_info, flags); 1169 } 1170 1171 static int ssif_start_processing(void *send_info, 1172 struct ipmi_smi *intf) 1173 { 1174 struct ssif_info *ssif_info = send_info; 1175 1176 ssif_info->intf = intf; 1177 1178 return 0; 1179 } 1180 1181 #define MAX_SSIF_BMCS 4 1182 1183 static unsigned short addr[MAX_SSIF_BMCS]; 1184 static int num_addrs; 1185 module_param_array(addr, ushort, &num_addrs, 0); 1186 MODULE_PARM_DESC(addr, "The addresses to scan for IPMI BMCs on the SSIFs."); 1187 1188 static char *adapter_name[MAX_SSIF_BMCS]; 1189 static int num_adapter_names; 1190 module_param_array(adapter_name, charp, &num_adapter_names, 0); 1191 MODULE_PARM_DESC(adapter_name, "The string name of the I2C device that has the BMC. By default all devices are scanned."); 1192 1193 static int slave_addrs[MAX_SSIF_BMCS]; 1194 static int num_slave_addrs; 1195 module_param_array(slave_addrs, int, &num_slave_addrs, 0); 1196 MODULE_PARM_DESC(slave_addrs, 1197 "The default IPMB slave address for the controller."); 1198 1199 static bool alerts_broken; 1200 module_param(alerts_broken, bool, 0); 1201 MODULE_PARM_DESC(alerts_broken, "Don't enable alerts for the controller."); 1202 1203 /* 1204 * Bit 0 enables message debugging, bit 1 enables state debugging, and 1205 * bit 2 enables timing debugging. This is an array indexed by 1206 * interface number" 1207 */ 1208 static int dbg[MAX_SSIF_BMCS]; 1209 static int num_dbg; 1210 module_param_array(dbg, int, &num_dbg, 0); 1211 MODULE_PARM_DESC(dbg, "Turn on debugging."); 1212 1213 static bool ssif_dbg_probe; 1214 module_param_named(dbg_probe, ssif_dbg_probe, bool, 0); 1215 MODULE_PARM_DESC(dbg_probe, "Enable debugging of probing of adapters."); 1216 1217 static bool ssif_tryacpi = true; 1218 module_param_named(tryacpi, ssif_tryacpi, bool, 0); 1219 MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the default scan of the interfaces identified via ACPI"); 1220 1221 static bool ssif_trydmi = true; 1222 module_param_named(trydmi, ssif_trydmi, bool, 0); 1223 MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the default scan of the interfaces identified via DMI (SMBIOS)"); 1224 1225 static DEFINE_MUTEX(ssif_infos_mutex); 1226 static LIST_HEAD(ssif_infos); 1227 1228 #define IPMI_SSIF_ATTR(name) \ 1229 static ssize_t ipmi_##name##_show(struct device *dev, \ 1230 struct device_attribute *attr, \ 1231 char *buf) \ 1232 { \ 1233 struct ssif_info *ssif_info = dev_get_drvdata(dev); \ 1234 \ 1235 return snprintf(buf, 10, "%u\n", ssif_get_stat(ssif_info, name));\ 1236 } \ 1237 static DEVICE_ATTR(name, S_IRUGO, ipmi_##name##_show, NULL) 1238 1239 static ssize_t ipmi_type_show(struct device *dev, 1240 struct device_attribute *attr, 1241 char *buf) 1242 { 1243 return snprintf(buf, 10, "ssif\n"); 1244 } 1245 static DEVICE_ATTR(type, S_IRUGO, ipmi_type_show, NULL); 1246 1247 IPMI_SSIF_ATTR(sent_messages); 1248 IPMI_SSIF_ATTR(sent_messages_parts); 1249 IPMI_SSIF_ATTR(send_retries); 1250 IPMI_SSIF_ATTR(send_errors); 1251 IPMI_SSIF_ATTR(received_messages); 1252 IPMI_SSIF_ATTR(received_message_parts); 1253 IPMI_SSIF_ATTR(receive_retries); 1254 IPMI_SSIF_ATTR(receive_errors); 1255 IPMI_SSIF_ATTR(flag_fetches); 1256 IPMI_SSIF_ATTR(hosed); 1257 IPMI_SSIF_ATTR(events); 1258 IPMI_SSIF_ATTR(watchdog_pretimeouts); 1259 IPMI_SSIF_ATTR(alerts); 1260 1261 static struct attribute *ipmi_ssif_dev_attrs[] = { 1262 &dev_attr_type.attr, 1263 &dev_attr_sent_messages.attr, 1264 &dev_attr_sent_messages_parts.attr, 1265 &dev_attr_send_retries.attr, 1266 &dev_attr_send_errors.attr, 1267 &dev_attr_received_messages.attr, 1268 &dev_attr_received_message_parts.attr, 1269 &dev_attr_receive_retries.attr, 1270 &dev_attr_receive_errors.attr, 1271 &dev_attr_flag_fetches.attr, 1272 &dev_attr_hosed.attr, 1273 &dev_attr_events.attr, 1274 &dev_attr_watchdog_pretimeouts.attr, 1275 &dev_attr_alerts.attr, 1276 NULL 1277 }; 1278 1279 static const struct attribute_group ipmi_ssif_dev_attr_group = { 1280 .attrs = ipmi_ssif_dev_attrs, 1281 }; 1282 1283 static void shutdown_ssif(void *send_info) 1284 { 1285 struct ssif_info *ssif_info = send_info; 1286 1287 device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group); 1288 dev_set_drvdata(&ssif_info->client->dev, NULL); 1289 1290 /* make sure the driver is not looking for flags any more. */ 1291 while (ssif_info->ssif_state != SSIF_NORMAL) 1292 schedule_timeout(1); 1293 1294 ssif_info->stopping = true; 1295 del_timer_sync(&ssif_info->watch_timer); 1296 del_timer_sync(&ssif_info->retry_timer); 1297 if (ssif_info->thread) { 1298 complete(&ssif_info->wake_thread); 1299 kthread_stop(ssif_info->thread); 1300 } 1301 } 1302 1303 static int ssif_remove(struct i2c_client *client) 1304 { 1305 struct ssif_info *ssif_info = i2c_get_clientdata(client); 1306 struct ssif_addr_info *addr_info; 1307 1308 if (!ssif_info) 1309 return 0; 1310 1311 /* 1312 * After this point, we won't deliver anything asychronously 1313 * to the message handler. We can unregister ourself. 1314 */ 1315 ipmi_unregister_smi(ssif_info->intf); 1316 1317 list_for_each_entry(addr_info, &ssif_infos, link) { 1318 if (addr_info->client == client) { 1319 addr_info->client = NULL; 1320 break; 1321 } 1322 } 1323 1324 kfree(ssif_info); 1325 1326 return 0; 1327 } 1328 1329 static int read_response(struct i2c_client *client, unsigned char *resp) 1330 { 1331 int ret = -ENODEV, retry_cnt = SSIF_RECV_RETRIES; 1332 1333 while (retry_cnt > 0) { 1334 ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE, 1335 resp); 1336 if (ret > 0) 1337 break; 1338 msleep(SSIF_MSG_MSEC); 1339 retry_cnt--; 1340 if (retry_cnt <= 0) 1341 break; 1342 } 1343 1344 return ret; 1345 } 1346 1347 static int do_cmd(struct i2c_client *client, int len, unsigned char *msg, 1348 int *resp_len, unsigned char *resp) 1349 { 1350 int retry_cnt; 1351 int ret; 1352 1353 retry_cnt = SSIF_SEND_RETRIES; 1354 retry1: 1355 ret = i2c_smbus_write_block_data(client, SSIF_IPMI_REQUEST, len, msg); 1356 if (ret) { 1357 retry_cnt--; 1358 if (retry_cnt > 0) 1359 goto retry1; 1360 return -ENODEV; 1361 } 1362 1363 ret = read_response(client, resp); 1364 if (ret > 0) { 1365 /* Validate that the response is correct. */ 1366 if (ret < 3 || 1367 (resp[0] != (msg[0] | (1 << 2))) || 1368 (resp[1] != msg[1])) 1369 ret = -EINVAL; 1370 else if (ret > IPMI_MAX_MSG_LENGTH) { 1371 ret = -E2BIG; 1372 } else { 1373 *resp_len = ret; 1374 ret = 0; 1375 } 1376 } 1377 1378 return ret; 1379 } 1380 1381 static int ssif_detect(struct i2c_client *client, struct i2c_board_info *info) 1382 { 1383 unsigned char *resp; 1384 unsigned char msg[3]; 1385 int rv; 1386 int len; 1387 1388 resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); 1389 if (!resp) 1390 return -ENOMEM; 1391 1392 /* Do a Get Device ID command, since it is required. */ 1393 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1394 msg[1] = IPMI_GET_DEVICE_ID_CMD; 1395 rv = do_cmd(client, 2, msg, &len, resp); 1396 if (rv) 1397 rv = -ENODEV; 1398 else 1399 strlcpy(info->type, DEVICE_NAME, I2C_NAME_SIZE); 1400 kfree(resp); 1401 return rv; 1402 } 1403 1404 static int strcmp_nospace(char *s1, char *s2) 1405 { 1406 while (*s1 && *s2) { 1407 while (isspace(*s1)) 1408 s1++; 1409 while (isspace(*s2)) 1410 s2++; 1411 if (*s1 > *s2) 1412 return 1; 1413 if (*s1 < *s2) 1414 return -1; 1415 s1++; 1416 s2++; 1417 } 1418 return 0; 1419 } 1420 1421 static struct ssif_addr_info *ssif_info_find(unsigned short addr, 1422 char *adapter_name, 1423 bool match_null_name) 1424 { 1425 struct ssif_addr_info *info, *found = NULL; 1426 1427 restart: 1428 list_for_each_entry(info, &ssif_infos, link) { 1429 if (info->binfo.addr == addr) { 1430 if (info->adapter_name || adapter_name) { 1431 if (!info->adapter_name != !adapter_name) { 1432 /* One is NULL and one is not */ 1433 continue; 1434 } 1435 if (adapter_name && 1436 strcmp_nospace(info->adapter_name, 1437 adapter_name)) 1438 /* Names do not match */ 1439 continue; 1440 } 1441 found = info; 1442 break; 1443 } 1444 } 1445 1446 if (!found && match_null_name) { 1447 /* Try to get an exact match first, then try with a NULL name */ 1448 adapter_name = NULL; 1449 match_null_name = false; 1450 goto restart; 1451 } 1452 1453 return found; 1454 } 1455 1456 static bool check_acpi(struct ssif_info *ssif_info, struct device *dev) 1457 { 1458 #ifdef CONFIG_ACPI 1459 acpi_handle acpi_handle; 1460 1461 acpi_handle = ACPI_HANDLE(dev); 1462 if (acpi_handle) { 1463 ssif_info->addr_source = SI_ACPI; 1464 ssif_info->addr_info.acpi_info.acpi_handle = acpi_handle; 1465 return true; 1466 } 1467 #endif 1468 return false; 1469 } 1470 1471 static int find_slave_address(struct i2c_client *client, int slave_addr) 1472 { 1473 #ifdef CONFIG_IPMI_DMI_DECODE 1474 if (!slave_addr) 1475 slave_addr = ipmi_dmi_get_slave_addr( 1476 SI_TYPE_INVALID, 1477 i2c_adapter_id(client->adapter), 1478 client->addr); 1479 #endif 1480 1481 return slave_addr; 1482 } 1483 1484 static int start_multipart_test(struct i2c_client *client, 1485 unsigned char *msg, bool do_middle) 1486 { 1487 int retry_cnt = SSIF_SEND_RETRIES, ret; 1488 1489 retry_write: 1490 ret = i2c_smbus_write_block_data(client, 1491 SSIF_IPMI_MULTI_PART_REQUEST_START, 1492 32, msg); 1493 if (ret) { 1494 retry_cnt--; 1495 if (retry_cnt > 0) 1496 goto retry_write; 1497 dev_err(&client->dev, "Could not write multi-part start, though the BMC said it could handle it. Just limit sends to one part.\n"); 1498 return ret; 1499 } 1500 1501 if (!do_middle) 1502 return 0; 1503 1504 ret = i2c_smbus_write_block_data(client, 1505 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE, 1506 32, msg + 32); 1507 if (ret) { 1508 dev_err(&client->dev, "Could not write multi-part middle, though the BMC said it could handle it. Just limit sends to one part.\n"); 1509 return ret; 1510 } 1511 1512 return 0; 1513 } 1514 1515 static void test_multipart_messages(struct i2c_client *client, 1516 struct ssif_info *ssif_info, 1517 unsigned char *resp) 1518 { 1519 unsigned char msg[65]; 1520 int ret; 1521 bool do_middle; 1522 1523 if (ssif_info->max_xmit_msg_size <= 32) 1524 return; 1525 1526 do_middle = ssif_info->max_xmit_msg_size > 63; 1527 1528 memset(msg, 0, sizeof(msg)); 1529 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1530 msg[1] = IPMI_GET_DEVICE_ID_CMD; 1531 1532 /* 1533 * The specification is all messed up dealing with sending 1534 * multi-part messages. Per what the specification says, it 1535 * is impossible to send a message that is a multiple of 32 1536 * bytes, except for 32 itself. It talks about a "start" 1537 * transaction (cmd=6) that must be 32 bytes, "middle" 1538 * transaction (cmd=7) that must be 32 bytes, and an "end" 1539 * transaction. The "end" transaction is shown as cmd=7 in 1540 * the text, but if that's the case there is no way to 1541 * differentiate between a middle and end part except the 1542 * length being less than 32. But there is a table at the far 1543 * end of the section (that I had never noticed until someone 1544 * pointed it out to me) that mentions it as cmd=8. 1545 * 1546 * After some thought, I think the example is wrong and the 1547 * end transaction should be cmd=8. But some systems don't 1548 * implement cmd=8, they use a zero-length end transaction, 1549 * even though that violates the SMBus specification. 1550 * 1551 * So, to work around this, this code tests if cmd=8 works. 1552 * If it does, then we use that. If not, it tests zero- 1553 * byte end transactions. If that works, good. If not, 1554 * we only allow 63-byte transactions max. 1555 */ 1556 1557 ret = start_multipart_test(client, msg, do_middle); 1558 if (ret) 1559 goto out_no_multi_part; 1560 1561 ret = i2c_smbus_write_block_data(client, 1562 SSIF_IPMI_MULTI_PART_REQUEST_END, 1563 1, msg + 64); 1564 1565 if (!ret) 1566 ret = read_response(client, resp); 1567 1568 if (ret > 0) { 1569 /* End transactions work, we are good. */ 1570 ssif_info->cmd8_works = true; 1571 return; 1572 } 1573 1574 ret = start_multipart_test(client, msg, do_middle); 1575 if (ret) { 1576 dev_err(&client->dev, "Second multipart test failed.\n"); 1577 goto out_no_multi_part; 1578 } 1579 1580 ret = i2c_smbus_write_block_data(client, 1581 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE, 1582 0, msg + 64); 1583 if (!ret) 1584 ret = read_response(client, resp); 1585 if (ret > 0) 1586 /* Zero-size end parts work, use those. */ 1587 return; 1588 1589 /* Limit to 63 bytes and use a short middle command to mark the end. */ 1590 if (ssif_info->max_xmit_msg_size > 63) 1591 ssif_info->max_xmit_msg_size = 63; 1592 return; 1593 1594 out_no_multi_part: 1595 ssif_info->max_xmit_msg_size = 32; 1596 return; 1597 } 1598 1599 /* 1600 * Global enables we care about. 1601 */ 1602 #define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \ 1603 IPMI_BMC_EVT_MSG_INTR) 1604 1605 static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) 1606 { 1607 unsigned char msg[3]; 1608 unsigned char *resp; 1609 struct ssif_info *ssif_info; 1610 int rv = 0; 1611 int len; 1612 int i; 1613 u8 slave_addr = 0; 1614 struct ssif_addr_info *addr_info = NULL; 1615 1616 resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); 1617 if (!resp) 1618 return -ENOMEM; 1619 1620 ssif_info = kzalloc(sizeof(*ssif_info), GFP_KERNEL); 1621 if (!ssif_info) { 1622 kfree(resp); 1623 return -ENOMEM; 1624 } 1625 1626 if (!check_acpi(ssif_info, &client->dev)) { 1627 addr_info = ssif_info_find(client->addr, client->adapter->name, 1628 true); 1629 if (!addr_info) { 1630 /* Must have come in through sysfs. */ 1631 ssif_info->addr_source = SI_HOTMOD; 1632 } else { 1633 ssif_info->addr_source = addr_info->addr_src; 1634 ssif_info->ssif_debug = addr_info->debug; 1635 ssif_info->addr_info = addr_info->addr_info; 1636 addr_info->client = client; 1637 slave_addr = addr_info->slave_addr; 1638 } 1639 } 1640 1641 slave_addr = find_slave_address(client, slave_addr); 1642 1643 dev_info(&client->dev, 1644 "Trying %s-specified SSIF interface at i2c address 0x%x, adapter %s, slave address 0x%x\n", 1645 ipmi_addr_src_to_str(ssif_info->addr_source), 1646 client->addr, client->adapter->name, slave_addr); 1647 1648 ssif_info->client = client; 1649 i2c_set_clientdata(client, ssif_info); 1650 1651 /* Now check for system interface capabilities */ 1652 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1653 msg[1] = IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_CMD; 1654 msg[2] = 0; /* SSIF */ 1655 rv = do_cmd(client, 3, msg, &len, resp); 1656 if (!rv && (len >= 3) && (resp[2] == 0)) { 1657 if (len < 7) { 1658 if (ssif_dbg_probe) 1659 dev_dbg(&ssif_info->client->dev, 1660 "SSIF info too short: %d\n", len); 1661 goto no_support; 1662 } 1663 1664 /* Got a good SSIF response, handle it. */ 1665 ssif_info->max_xmit_msg_size = resp[5]; 1666 ssif_info->max_recv_msg_size = resp[6]; 1667 ssif_info->multi_support = (resp[4] >> 6) & 0x3; 1668 ssif_info->supports_pec = (resp[4] >> 3) & 0x1; 1669 1670 /* Sanitize the data */ 1671 switch (ssif_info->multi_support) { 1672 case SSIF_NO_MULTI: 1673 if (ssif_info->max_xmit_msg_size > 32) 1674 ssif_info->max_xmit_msg_size = 32; 1675 if (ssif_info->max_recv_msg_size > 32) 1676 ssif_info->max_recv_msg_size = 32; 1677 break; 1678 1679 case SSIF_MULTI_2_PART: 1680 if (ssif_info->max_xmit_msg_size > 63) 1681 ssif_info->max_xmit_msg_size = 63; 1682 if (ssif_info->max_recv_msg_size > 62) 1683 ssif_info->max_recv_msg_size = 62; 1684 break; 1685 1686 case SSIF_MULTI_n_PART: 1687 /* We take whatever size given, but do some testing. */ 1688 break; 1689 1690 default: 1691 /* Data is not sane, just give up. */ 1692 goto no_support; 1693 } 1694 } else { 1695 no_support: 1696 /* Assume no multi-part or PEC support */ 1697 dev_info(&ssif_info->client->dev, 1698 "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n", 1699 rv, len, resp[2]); 1700 1701 ssif_info->max_xmit_msg_size = 32; 1702 ssif_info->max_recv_msg_size = 32; 1703 ssif_info->multi_support = SSIF_NO_MULTI; 1704 ssif_info->supports_pec = 0; 1705 } 1706 1707 test_multipart_messages(client, ssif_info, resp); 1708 1709 /* Make sure the NMI timeout is cleared. */ 1710 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1711 msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; 1712 msg[2] = WDT_PRE_TIMEOUT_INT; 1713 rv = do_cmd(client, 3, msg, &len, resp); 1714 if (rv || (len < 3) || (resp[2] != 0)) 1715 dev_warn(&ssif_info->client->dev, 1716 "Unable to clear message flags: %d %d %2.2x\n", 1717 rv, len, resp[2]); 1718 1719 /* Attempt to enable the event buffer. */ 1720 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1721 msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; 1722 rv = do_cmd(client, 2, msg, &len, resp); 1723 if (rv || (len < 4) || (resp[2] != 0)) { 1724 dev_warn(&ssif_info->client->dev, 1725 "Error getting global enables: %d %d %2.2x\n", 1726 rv, len, resp[2]); 1727 rv = 0; /* Not fatal */ 1728 goto found; 1729 } 1730 1731 ssif_info->global_enables = resp[3]; 1732 1733 if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) { 1734 ssif_info->has_event_buffer = true; 1735 /* buffer is already enabled, nothing to do. */ 1736 goto found; 1737 } 1738 1739 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1740 msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; 1741 msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF; 1742 rv = do_cmd(client, 3, msg, &len, resp); 1743 if (rv || (len < 2)) { 1744 dev_warn(&ssif_info->client->dev, 1745 "Error setting global enables: %d %d %2.2x\n", 1746 rv, len, resp[2]); 1747 rv = 0; /* Not fatal */ 1748 goto found; 1749 } 1750 1751 if (resp[2] == 0) { 1752 /* A successful return means the event buffer is supported. */ 1753 ssif_info->has_event_buffer = true; 1754 ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF; 1755 } 1756 1757 /* Some systems don't behave well if you enable alerts. */ 1758 if (alerts_broken) 1759 goto found; 1760 1761 msg[0] = IPMI_NETFN_APP_REQUEST << 2; 1762 msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; 1763 msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR; 1764 rv = do_cmd(client, 3, msg, &len, resp); 1765 if (rv || (len < 2)) { 1766 dev_warn(&ssif_info->client->dev, 1767 "Error setting global enables: %d %d %2.2x\n", 1768 rv, len, resp[2]); 1769 rv = 0; /* Not fatal */ 1770 goto found; 1771 } 1772 1773 if (resp[2] == 0) { 1774 /* A successful return means the alert is supported. */ 1775 ssif_info->supports_alert = true; 1776 ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR; 1777 } 1778 1779 found: 1780 if (ssif_dbg_probe) { 1781 dev_dbg(&ssif_info->client->dev, 1782 "%s: i2c_probe found device at i2c address %x\n", 1783 __func__, client->addr); 1784 } 1785 1786 spin_lock_init(&ssif_info->lock); 1787 ssif_info->ssif_state = SSIF_NORMAL; 1788 timer_setup(&ssif_info->retry_timer, retry_timeout, 0); 1789 timer_setup(&ssif_info->watch_timer, watch_timeout, 0); 1790 1791 for (i = 0; i < SSIF_NUM_STATS; i++) 1792 atomic_set(&ssif_info->stats[i], 0); 1793 1794 if (ssif_info->supports_pec) 1795 ssif_info->client->flags |= I2C_CLIENT_PEC; 1796 1797 ssif_info->handlers.owner = THIS_MODULE; 1798 ssif_info->handlers.start_processing = ssif_start_processing; 1799 ssif_info->handlers.shutdown = shutdown_ssif; 1800 ssif_info->handlers.get_smi_info = get_smi_info; 1801 ssif_info->handlers.sender = sender; 1802 ssif_info->handlers.request_events = request_events; 1803 ssif_info->handlers.set_need_watch = ssif_set_need_watch; 1804 1805 { 1806 unsigned int thread_num; 1807 1808 thread_num = ((i2c_adapter_id(ssif_info->client->adapter) 1809 << 8) | 1810 ssif_info->client->addr); 1811 init_completion(&ssif_info->wake_thread); 1812 ssif_info->thread = kthread_run(ipmi_ssif_thread, ssif_info, 1813 "kssif%4.4x", thread_num); 1814 if (IS_ERR(ssif_info->thread)) { 1815 rv = PTR_ERR(ssif_info->thread); 1816 dev_notice(&ssif_info->client->dev, 1817 "Could not start kernel thread: error %d\n", 1818 rv); 1819 goto out; 1820 } 1821 } 1822 1823 dev_set_drvdata(&ssif_info->client->dev, ssif_info); 1824 rv = device_add_group(&ssif_info->client->dev, 1825 &ipmi_ssif_dev_attr_group); 1826 if (rv) { 1827 dev_err(&ssif_info->client->dev, 1828 "Unable to add device attributes: error %d\n", 1829 rv); 1830 goto out; 1831 } 1832 1833 rv = ipmi_register_smi(&ssif_info->handlers, 1834 ssif_info, 1835 &ssif_info->client->dev, 1836 slave_addr); 1837 if (rv) { 1838 dev_err(&ssif_info->client->dev, 1839 "Unable to register device: error %d\n", rv); 1840 goto out_remove_attr; 1841 } 1842 1843 out: 1844 if (rv) { 1845 if (addr_info) 1846 addr_info->client = NULL; 1847 1848 dev_err(&ssif_info->client->dev, 1849 "Unable to start IPMI SSIF: %d\n", rv); 1850 kfree(ssif_info); 1851 } 1852 kfree(resp); 1853 return rv; 1854 1855 out_remove_attr: 1856 device_remove_group(&ssif_info->client->dev, &ipmi_ssif_dev_attr_group); 1857 dev_set_drvdata(&ssif_info->client->dev, NULL); 1858 goto out; 1859 } 1860 1861 static int ssif_adapter_handler(struct device *adev, void *opaque) 1862 { 1863 struct ssif_addr_info *addr_info = opaque; 1864 1865 if (adev->type != &i2c_adapter_type) 1866 return 0; 1867 1868 addr_info->added_client = i2c_new_device(to_i2c_adapter(adev), 1869 &addr_info->binfo); 1870 1871 if (!addr_info->adapter_name) 1872 return 1; /* Only try the first I2C adapter by default. */ 1873 return 0; 1874 } 1875 1876 static int new_ssif_client(int addr, char *adapter_name, 1877 int debug, int slave_addr, 1878 enum ipmi_addr_src addr_src, 1879 struct device *dev) 1880 { 1881 struct ssif_addr_info *addr_info; 1882 int rv = 0; 1883 1884 mutex_lock(&ssif_infos_mutex); 1885 if (ssif_info_find(addr, adapter_name, false)) { 1886 rv = -EEXIST; 1887 goto out_unlock; 1888 } 1889 1890 addr_info = kzalloc(sizeof(*addr_info), GFP_KERNEL); 1891 if (!addr_info) { 1892 rv = -ENOMEM; 1893 goto out_unlock; 1894 } 1895 1896 if (adapter_name) { 1897 addr_info->adapter_name = kstrdup(adapter_name, GFP_KERNEL); 1898 if (!addr_info->adapter_name) { 1899 kfree(addr_info); 1900 rv = -ENOMEM; 1901 goto out_unlock; 1902 } 1903 } 1904 1905 strncpy(addr_info->binfo.type, DEVICE_NAME, 1906 sizeof(addr_info->binfo.type)); 1907 addr_info->binfo.addr = addr; 1908 addr_info->binfo.platform_data = addr_info; 1909 addr_info->debug = debug; 1910 addr_info->slave_addr = slave_addr; 1911 addr_info->addr_src = addr_src; 1912 addr_info->dev = dev; 1913 1914 if (dev) 1915 dev_set_drvdata(dev, addr_info); 1916 1917 list_add_tail(&addr_info->link, &ssif_infos); 1918 1919 if (initialized) 1920 i2c_for_each_dev(addr_info, ssif_adapter_handler); 1921 /* Otherwise address list will get it */ 1922 1923 out_unlock: 1924 mutex_unlock(&ssif_infos_mutex); 1925 return rv; 1926 } 1927 1928 static void free_ssif_clients(void) 1929 { 1930 struct ssif_addr_info *info, *tmp; 1931 1932 mutex_lock(&ssif_infos_mutex); 1933 list_for_each_entry_safe(info, tmp, &ssif_infos, link) { 1934 list_del(&info->link); 1935 kfree(info->adapter_name); 1936 kfree(info); 1937 } 1938 mutex_unlock(&ssif_infos_mutex); 1939 } 1940 1941 static unsigned short *ssif_address_list(void) 1942 { 1943 struct ssif_addr_info *info; 1944 unsigned int count = 0, i = 0; 1945 unsigned short *address_list; 1946 1947 list_for_each_entry(info, &ssif_infos, link) 1948 count++; 1949 1950 address_list = kcalloc(count + 1, sizeof(*address_list), 1951 GFP_KERNEL); 1952 if (!address_list) 1953 return NULL; 1954 1955 list_for_each_entry(info, &ssif_infos, link) { 1956 unsigned short addr = info->binfo.addr; 1957 int j; 1958 1959 for (j = 0; j < i; j++) { 1960 if (address_list[j] == addr) 1961 /* Found a dup. */ 1962 break; 1963 } 1964 if (j == i) /* Didn't find it in the list. */ 1965 address_list[i++] = addr; 1966 } 1967 address_list[i] = I2C_CLIENT_END; 1968 1969 return address_list; 1970 } 1971 1972 #ifdef CONFIG_ACPI 1973 static const struct acpi_device_id ssif_acpi_match[] = { 1974 { "IPI0001", 0 }, 1975 { }, 1976 }; 1977 MODULE_DEVICE_TABLE(acpi, ssif_acpi_match); 1978 #endif 1979 1980 #ifdef CONFIG_DMI 1981 static int dmi_ipmi_probe(struct platform_device *pdev) 1982 { 1983 u8 slave_addr = 0; 1984 u16 i2c_addr; 1985 int rv; 1986 1987 if (!ssif_trydmi) 1988 return -ENODEV; 1989 1990 rv = device_property_read_u16(&pdev->dev, "i2c-addr", &i2c_addr); 1991 if (rv) { 1992 dev_warn(&pdev->dev, "No i2c-addr property\n"); 1993 return -ENODEV; 1994 } 1995 1996 rv = device_property_read_u8(&pdev->dev, "slave-addr", &slave_addr); 1997 if (rv) 1998 slave_addr = 0x20; 1999 2000 return new_ssif_client(i2c_addr, NULL, 0, 2001 slave_addr, SI_SMBIOS, &pdev->dev); 2002 } 2003 #else 2004 static int dmi_ipmi_probe(struct platform_device *pdev) 2005 { 2006 return -ENODEV; 2007 } 2008 #endif 2009 2010 static const struct i2c_device_id ssif_id[] = { 2011 { DEVICE_NAME, 0 }, 2012 { } 2013 }; 2014 MODULE_DEVICE_TABLE(i2c, ssif_id); 2015 2016 static struct i2c_driver ssif_i2c_driver = { 2017 .class = I2C_CLASS_HWMON, 2018 .driver = { 2019 .name = DEVICE_NAME 2020 }, 2021 .probe = ssif_probe, 2022 .remove = ssif_remove, 2023 .alert = ssif_alert, 2024 .id_table = ssif_id, 2025 .detect = ssif_detect 2026 }; 2027 2028 static int ssif_platform_probe(struct platform_device *dev) 2029 { 2030 return dmi_ipmi_probe(dev); 2031 } 2032 2033 static int ssif_platform_remove(struct platform_device *dev) 2034 { 2035 struct ssif_addr_info *addr_info = dev_get_drvdata(&dev->dev); 2036 2037 if (!addr_info) 2038 return 0; 2039 2040 mutex_lock(&ssif_infos_mutex); 2041 i2c_unregister_device(addr_info->added_client); 2042 2043 list_del(&addr_info->link); 2044 kfree(addr_info); 2045 mutex_unlock(&ssif_infos_mutex); 2046 return 0; 2047 } 2048 2049 static const struct platform_device_id ssif_plat_ids[] = { 2050 { "dmi-ipmi-ssif", 0 }, 2051 { } 2052 }; 2053 2054 static struct platform_driver ipmi_driver = { 2055 .driver = { 2056 .name = DEVICE_NAME, 2057 }, 2058 .probe = ssif_platform_probe, 2059 .remove = ssif_platform_remove, 2060 .id_table = ssif_plat_ids 2061 }; 2062 2063 static int init_ipmi_ssif(void) 2064 { 2065 int i; 2066 int rv; 2067 2068 if (initialized) 2069 return 0; 2070 2071 pr_info("IPMI SSIF Interface driver\n"); 2072 2073 /* build list for i2c from addr list */ 2074 for (i = 0; i < num_addrs; i++) { 2075 rv = new_ssif_client(addr[i], adapter_name[i], 2076 dbg[i], slave_addrs[i], 2077 SI_HARDCODED, NULL); 2078 if (rv) 2079 pr_err("Couldn't add hardcoded device at addr 0x%x\n", 2080 addr[i]); 2081 } 2082 2083 if (ssif_tryacpi) 2084 ssif_i2c_driver.driver.acpi_match_table = 2085 ACPI_PTR(ssif_acpi_match); 2086 2087 if (ssif_trydmi) { 2088 rv = platform_driver_register(&ipmi_driver); 2089 if (rv) 2090 pr_err("Unable to register driver: %d\n", rv); 2091 } 2092 2093 ssif_i2c_driver.address_list = ssif_address_list(); 2094 2095 rv = i2c_add_driver(&ssif_i2c_driver); 2096 if (!rv) 2097 initialized = true; 2098 2099 return rv; 2100 } 2101 module_init(init_ipmi_ssif); 2102 2103 static void cleanup_ipmi_ssif(void) 2104 { 2105 if (!initialized) 2106 return; 2107 2108 initialized = false; 2109 2110 i2c_del_driver(&ssif_i2c_driver); 2111 2112 kfree(ssif_i2c_driver.address_list); 2113 2114 if (ssif_trydmi) 2115 platform_driver_unregister(&ipmi_driver); 2116 2117 free_ssif_clients(); 2118 } 2119 module_exit(cleanup_ipmi_ssif); 2120 2121 MODULE_ALIAS("platform:dmi-ipmi-ssif"); 2122 MODULE_AUTHOR("Todd C Davis <todd.c.davis@intel.com>, Corey Minyard <minyard@acm.org>"); 2123 MODULE_DESCRIPTION("IPMI driver for management controllers on a SMBus"); 2124 MODULE_LICENSE("GPL"); 2125