1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (c) 2015-2016, IBM Corporation. 4 */ 5 6 #include <linux/atomic.h> 7 #include <linux/bt-bmc.h> 8 #include <linux/errno.h> 9 #include <linux/interrupt.h> 10 #include <linux/io.h> 11 #include <linux/mfd/syscon.h> 12 #include <linux/miscdevice.h> 13 #include <linux/module.h> 14 #include <linux/of.h> 15 #include <linux/platform_device.h> 16 #include <linux/poll.h> 17 #include <linux/regmap.h> 18 #include <linux/sched.h> 19 #include <linux/timer.h> 20 21 /* 22 * This is a BMC device used to communicate to the host 23 */ 24 #define DEVICE_NAME "ipmi-bt-host" 25 26 #define BT_IO_BASE 0xe4 27 #define BT_IRQ 10 28 29 #define BT_CR0 0x0 30 #define BT_CR0_IO_BASE 16 31 #define BT_CR0_IRQ 12 32 #define BT_CR0_EN_CLR_SLV_RDP 0x8 33 #define BT_CR0_EN_CLR_SLV_WRP 0x4 34 #define BT_CR0_ENABLE_IBT 0x1 35 #define BT_CR1 0x4 36 #define BT_CR1_IRQ_H2B 0x01 37 #define BT_CR1_IRQ_HBUSY 0x40 38 #define BT_CR2 0x8 39 #define BT_CR2_IRQ_H2B 0x01 40 #define BT_CR2_IRQ_HBUSY 0x40 41 #define BT_CR3 0xc 42 #define BT_CTRL 0x10 43 #define BT_CTRL_B_BUSY 0x80 44 #define BT_CTRL_H_BUSY 0x40 45 #define BT_CTRL_OEM0 0x20 46 #define BT_CTRL_SMS_ATN 0x10 47 #define BT_CTRL_B2H_ATN 0x08 48 #define BT_CTRL_H2B_ATN 0x04 49 #define BT_CTRL_CLR_RD_PTR 0x02 50 #define BT_CTRL_CLR_WR_PTR 0x01 51 #define BT_BMC2HOST 0x14 52 #define BT_INTMASK 0x18 53 #define BT_INTMASK_B2H_IRQEN 0x01 54 #define BT_INTMASK_B2H_IRQ 0x02 55 #define BT_INTMASK_BMC_HWRST 0x80 56 57 #define BT_BMC_BUFFER_SIZE 256 58 59 struct bt_bmc { 60 struct device dev; 61 struct miscdevice miscdev; 62 struct regmap *map; 63 int offset; 64 int irq; 65 wait_queue_head_t queue; 66 struct timer_list poll_timer; 67 struct mutex mutex; 68 }; 69 70 static atomic_t open_count = ATOMIC_INIT(0); 71 72 static const struct regmap_config bt_regmap_cfg = { 73 .reg_bits = 32, 74 .val_bits = 32, 75 .reg_stride = 4, 76 }; 77 78 static u8 bt_inb(struct bt_bmc *bt_bmc, int reg) 79 { 80 uint32_t val = 0; 81 int rc; 82 83 rc = regmap_read(bt_bmc->map, bt_bmc->offset + reg, &val); 84 WARN(rc != 0, "regmap_read() failed: %d\n", rc); 85 86 return rc == 0 ? (u8) val : 0; 87 } 88 89 static void bt_outb(struct bt_bmc *bt_bmc, u8 data, int reg) 90 { 91 int rc; 92 93 rc = regmap_write(bt_bmc->map, bt_bmc->offset + reg, data); 94 WARN(rc != 0, "regmap_write() failed: %d\n", rc); 95 } 96 97 static void clr_rd_ptr(struct bt_bmc *bt_bmc) 98 { 99 bt_outb(bt_bmc, BT_CTRL_CLR_RD_PTR, BT_CTRL); 100 } 101 102 static void clr_wr_ptr(struct bt_bmc *bt_bmc) 103 { 104 bt_outb(bt_bmc, BT_CTRL_CLR_WR_PTR, BT_CTRL); 105 } 106 107 static void clr_h2b_atn(struct bt_bmc *bt_bmc) 108 { 109 bt_outb(bt_bmc, BT_CTRL_H2B_ATN, BT_CTRL); 110 } 111 112 static void set_b_busy(struct bt_bmc *bt_bmc) 113 { 114 if (!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY)) 115 bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); 116 } 117 118 static void clr_b_busy(struct bt_bmc *bt_bmc) 119 { 120 if (bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY) 121 bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); 122 } 123 124 static void set_b2h_atn(struct bt_bmc *bt_bmc) 125 { 126 bt_outb(bt_bmc, BT_CTRL_B2H_ATN, BT_CTRL); 127 } 128 129 static u8 bt_read(struct bt_bmc *bt_bmc) 130 { 131 return bt_inb(bt_bmc, BT_BMC2HOST); 132 } 133 134 static ssize_t bt_readn(struct bt_bmc *bt_bmc, u8 *buf, size_t n) 135 { 136 int i; 137 138 for (i = 0; i < n; i++) 139 buf[i] = bt_read(bt_bmc); 140 return n; 141 } 142 143 static void bt_write(struct bt_bmc *bt_bmc, u8 c) 144 { 145 bt_outb(bt_bmc, c, BT_BMC2HOST); 146 } 147 148 static ssize_t bt_writen(struct bt_bmc *bt_bmc, u8 *buf, size_t n) 149 { 150 int i; 151 152 for (i = 0; i < n; i++) 153 bt_write(bt_bmc, buf[i]); 154 return n; 155 } 156 157 static void set_sms_atn(struct bt_bmc *bt_bmc) 158 { 159 bt_outb(bt_bmc, BT_CTRL_SMS_ATN, BT_CTRL); 160 } 161 162 static struct bt_bmc *file_bt_bmc(struct file *file) 163 { 164 return container_of(file->private_data, struct bt_bmc, miscdev); 165 } 166 167 static int bt_bmc_open(struct inode *inode, struct file *file) 168 { 169 struct bt_bmc *bt_bmc = file_bt_bmc(file); 170 171 if (atomic_inc_return(&open_count) == 1) { 172 clr_b_busy(bt_bmc); 173 return 0; 174 } 175 176 atomic_dec(&open_count); 177 return -EBUSY; 178 } 179 180 /* 181 * The BT (Block Transfer) interface means that entire messages are 182 * buffered by the host before a notification is sent to the BMC that 183 * there is data to be read. The first byte is the length and the 184 * message data follows. The read operation just tries to capture the 185 * whole before returning it to userspace. 186 * 187 * BT Message format : 188 * 189 * Byte 1 Byte 2 Byte 3 Byte 4 Byte 5:N 190 * Length NetFn/LUN Seq Cmd Data 191 * 192 */ 193 static ssize_t bt_bmc_read(struct file *file, char __user *buf, 194 size_t count, loff_t *ppos) 195 { 196 struct bt_bmc *bt_bmc = file_bt_bmc(file); 197 u8 len; 198 int len_byte = 1; 199 u8 kbuffer[BT_BMC_BUFFER_SIZE]; 200 ssize_t ret = 0; 201 ssize_t nread; 202 203 WARN_ON(*ppos); 204 205 if (wait_event_interruptible(bt_bmc->queue, 206 bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN)) 207 return -ERESTARTSYS; 208 209 mutex_lock(&bt_bmc->mutex); 210 211 if (unlikely(!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN))) { 212 ret = -EIO; 213 goto out_unlock; 214 } 215 216 set_b_busy(bt_bmc); 217 clr_h2b_atn(bt_bmc); 218 clr_rd_ptr(bt_bmc); 219 220 /* 221 * The BT frames start with the message length, which does not 222 * include the length byte. 223 */ 224 kbuffer[0] = bt_read(bt_bmc); 225 len = kbuffer[0]; 226 227 /* We pass the length back to userspace as well */ 228 if (len + 1 > count) 229 len = count - 1; 230 231 while (len) { 232 nread = min_t(ssize_t, len, sizeof(kbuffer) - len_byte); 233 234 bt_readn(bt_bmc, kbuffer + len_byte, nread); 235 236 if (copy_to_user(buf, kbuffer, nread + len_byte)) { 237 ret = -EFAULT; 238 break; 239 } 240 len -= nread; 241 buf += nread + len_byte; 242 ret += nread + len_byte; 243 len_byte = 0; 244 } 245 246 clr_b_busy(bt_bmc); 247 248 out_unlock: 249 mutex_unlock(&bt_bmc->mutex); 250 return ret; 251 } 252 253 /* 254 * BT Message response format : 255 * 256 * Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6:N 257 * Length NetFn/LUN Seq Cmd Code Data 258 */ 259 static ssize_t bt_bmc_write(struct file *file, const char __user *buf, 260 size_t count, loff_t *ppos) 261 { 262 struct bt_bmc *bt_bmc = file_bt_bmc(file); 263 u8 kbuffer[BT_BMC_BUFFER_SIZE]; 264 ssize_t ret = 0; 265 ssize_t nwritten; 266 267 /* 268 * send a minimum response size 269 */ 270 if (count < 5) 271 return -EINVAL; 272 273 WARN_ON(*ppos); 274 275 /* 276 * There's no interrupt for clearing bmc busy so we have to 277 * poll 278 */ 279 if (wait_event_interruptible(bt_bmc->queue, 280 !(bt_inb(bt_bmc, BT_CTRL) & 281 (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN)))) 282 return -ERESTARTSYS; 283 284 mutex_lock(&bt_bmc->mutex); 285 286 if (unlikely(bt_inb(bt_bmc, BT_CTRL) & 287 (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) { 288 ret = -EIO; 289 goto out_unlock; 290 } 291 292 clr_wr_ptr(bt_bmc); 293 294 while (count) { 295 nwritten = min_t(ssize_t, count, sizeof(kbuffer)); 296 if (copy_from_user(&kbuffer, buf, nwritten)) { 297 ret = -EFAULT; 298 break; 299 } 300 301 bt_writen(bt_bmc, kbuffer, nwritten); 302 303 count -= nwritten; 304 buf += nwritten; 305 ret += nwritten; 306 } 307 308 set_b2h_atn(bt_bmc); 309 310 out_unlock: 311 mutex_unlock(&bt_bmc->mutex); 312 return ret; 313 } 314 315 static long bt_bmc_ioctl(struct file *file, unsigned int cmd, 316 unsigned long param) 317 { 318 struct bt_bmc *bt_bmc = file_bt_bmc(file); 319 320 switch (cmd) { 321 case BT_BMC_IOCTL_SMS_ATN: 322 set_sms_atn(bt_bmc); 323 return 0; 324 } 325 return -EINVAL; 326 } 327 328 static int bt_bmc_release(struct inode *inode, struct file *file) 329 { 330 struct bt_bmc *bt_bmc = file_bt_bmc(file); 331 332 atomic_dec(&open_count); 333 set_b_busy(bt_bmc); 334 return 0; 335 } 336 337 static __poll_t bt_bmc_poll(struct file *file, poll_table *wait) 338 { 339 struct bt_bmc *bt_bmc = file_bt_bmc(file); 340 __poll_t mask = 0; 341 u8 ctrl; 342 343 poll_wait(file, &bt_bmc->queue, wait); 344 345 ctrl = bt_inb(bt_bmc, BT_CTRL); 346 347 if (ctrl & BT_CTRL_H2B_ATN) 348 mask |= EPOLLIN; 349 350 if (!(ctrl & (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) 351 mask |= EPOLLOUT; 352 353 return mask; 354 } 355 356 static const struct file_operations bt_bmc_fops = { 357 .owner = THIS_MODULE, 358 .open = bt_bmc_open, 359 .read = bt_bmc_read, 360 .write = bt_bmc_write, 361 .release = bt_bmc_release, 362 .poll = bt_bmc_poll, 363 .unlocked_ioctl = bt_bmc_ioctl, 364 }; 365 366 static void poll_timer(struct timer_list *t) 367 { 368 struct bt_bmc *bt_bmc = from_timer(bt_bmc, t, poll_timer); 369 370 bt_bmc->poll_timer.expires += msecs_to_jiffies(500); 371 wake_up(&bt_bmc->queue); 372 add_timer(&bt_bmc->poll_timer); 373 } 374 375 static irqreturn_t bt_bmc_irq(int irq, void *arg) 376 { 377 struct bt_bmc *bt_bmc = arg; 378 u32 reg; 379 int rc; 380 381 rc = regmap_read(bt_bmc->map, bt_bmc->offset + BT_CR2, ®); 382 if (rc) 383 return IRQ_NONE; 384 385 reg &= BT_CR2_IRQ_H2B | BT_CR2_IRQ_HBUSY; 386 if (!reg) 387 return IRQ_NONE; 388 389 /* ack pending IRQs */ 390 regmap_write(bt_bmc->map, bt_bmc->offset + BT_CR2, reg); 391 392 wake_up(&bt_bmc->queue); 393 return IRQ_HANDLED; 394 } 395 396 static int bt_bmc_config_irq(struct bt_bmc *bt_bmc, 397 struct platform_device *pdev) 398 { 399 struct device *dev = &pdev->dev; 400 int rc; 401 402 bt_bmc->irq = platform_get_irq(pdev, 0); 403 if (!bt_bmc->irq) 404 return -ENODEV; 405 406 rc = devm_request_irq(dev, bt_bmc->irq, bt_bmc_irq, IRQF_SHARED, 407 DEVICE_NAME, bt_bmc); 408 if (rc < 0) { 409 dev_warn(dev, "Unable to request IRQ %d\n", bt_bmc->irq); 410 bt_bmc->irq = 0; 411 return rc; 412 } 413 414 /* 415 * Configure IRQs on the bmc clearing the H2B and HBUSY bits; 416 * H2B will be asserted when the bmc has data for us; HBUSY 417 * will be cleared (along with B2H) when we can write the next 418 * message to the BT buffer 419 */ 420 rc = regmap_update_bits(bt_bmc->map, bt_bmc->offset + BT_CR1, 421 (BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY), 422 (BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY)); 423 424 return rc; 425 } 426 427 static int bt_bmc_probe(struct platform_device *pdev) 428 { 429 struct bt_bmc *bt_bmc; 430 struct device *dev; 431 int rc; 432 433 if (!pdev || !pdev->dev.of_node) 434 return -ENODEV; 435 436 dev = &pdev->dev; 437 dev_info(dev, "Found bt bmc device\n"); 438 439 bt_bmc = devm_kzalloc(dev, sizeof(*bt_bmc), GFP_KERNEL); 440 if (!bt_bmc) 441 return -ENOMEM; 442 443 dev_set_drvdata(&pdev->dev, bt_bmc); 444 445 bt_bmc->map = syscon_node_to_regmap(pdev->dev.parent->of_node); 446 if (IS_ERR(bt_bmc->map)) { 447 void __iomem *base; 448 449 /* 450 * Assume it's not the MFD-based devicetree description, in 451 * which case generate a regmap ourselves 452 */ 453 base = devm_platform_ioremap_resource(pdev, 0); 454 if (IS_ERR(base)) 455 return PTR_ERR(base); 456 457 bt_bmc->map = devm_regmap_init_mmio(dev, base, &bt_regmap_cfg); 458 bt_bmc->offset = 0; 459 } else { 460 rc = of_property_read_u32(dev->of_node, "reg", &bt_bmc->offset); 461 if (rc) 462 return rc; 463 } 464 465 mutex_init(&bt_bmc->mutex); 466 init_waitqueue_head(&bt_bmc->queue); 467 468 bt_bmc->miscdev.minor = MISC_DYNAMIC_MINOR, 469 bt_bmc->miscdev.name = DEVICE_NAME, 470 bt_bmc->miscdev.fops = &bt_bmc_fops, 471 bt_bmc->miscdev.parent = dev; 472 rc = misc_register(&bt_bmc->miscdev); 473 if (rc) { 474 dev_err(dev, "Unable to register misc device\n"); 475 return rc; 476 } 477 478 bt_bmc_config_irq(bt_bmc, pdev); 479 480 if (bt_bmc->irq) { 481 dev_info(dev, "Using IRQ %d\n", bt_bmc->irq); 482 } else { 483 dev_info(dev, "No IRQ; using timer\n"); 484 timer_setup(&bt_bmc->poll_timer, poll_timer, 0); 485 bt_bmc->poll_timer.expires = jiffies + msecs_to_jiffies(10); 486 add_timer(&bt_bmc->poll_timer); 487 } 488 489 regmap_write(bt_bmc->map, bt_bmc->offset + BT_CR0, 490 (BT_IO_BASE << BT_CR0_IO_BASE) | 491 (BT_IRQ << BT_CR0_IRQ) | 492 BT_CR0_EN_CLR_SLV_RDP | 493 BT_CR0_EN_CLR_SLV_WRP | 494 BT_CR0_ENABLE_IBT); 495 496 clr_b_busy(bt_bmc); 497 498 return 0; 499 } 500 501 static int bt_bmc_remove(struct platform_device *pdev) 502 { 503 struct bt_bmc *bt_bmc = dev_get_drvdata(&pdev->dev); 504 505 misc_deregister(&bt_bmc->miscdev); 506 if (!bt_bmc->irq) 507 del_timer_sync(&bt_bmc->poll_timer); 508 return 0; 509 } 510 511 static const struct of_device_id bt_bmc_match[] = { 512 { .compatible = "aspeed,ast2400-ibt-bmc" }, 513 { .compatible = "aspeed,ast2500-ibt-bmc" }, 514 { }, 515 }; 516 517 static struct platform_driver bt_bmc_driver = { 518 .driver = { 519 .name = DEVICE_NAME, 520 .of_match_table = bt_bmc_match, 521 }, 522 .probe = bt_bmc_probe, 523 .remove = bt_bmc_remove, 524 }; 525 526 module_platform_driver(bt_bmc_driver); 527 528 MODULE_DEVICE_TABLE(of, bt_bmc_match); 529 MODULE_LICENSE("GPL"); 530 MODULE_AUTHOR("Alistair Popple <alistair@popple.id.au>"); 531 MODULE_DESCRIPTION("Linux device interface to the IPMI BT interface"); 532