1# SPDX-License-Identifier: GPL-2.0-only 2# 3# IPMI device configuration 4# 5 6menuconfig IPMI_HANDLER 7 tristate 'IPMI top-level message handler' 8 depends on HAS_IOMEM 9 select IPMI_DMI_DECODE if DMI 10 help 11 This enables the central IPMI message handler, required for IPMI 12 to work. 13 14 IPMI is a standard for managing sensors (temperature, 15 voltage, etc.) in a system. 16 17 See <file:Documentation/IPMI.txt> for more details on the driver. 18 19 If unsure, say N. 20 21config IPMI_DMI_DECODE 22 select IPMI_PLAT_DATA 23 bool 24 25config IPMI_PLAT_DATA 26 bool 27 28if IPMI_HANDLER 29 30config IPMI_PANIC_EVENT 31 bool 'Generate a panic event to all BMCs on a panic' 32 help 33 When a panic occurs, this will cause the IPMI message handler to, 34 by default, generate an IPMI event describing the panic to each 35 interface registered with the message handler. This is always 36 available, the module parameter for ipmi_msghandler named 37 panic_op can be set to "event" to chose this value, this config 38 simply causes the default value to be set to "event". 39 40config IPMI_PANIC_STRING 41 bool 'Generate OEM events containing the panic string' 42 depends on IPMI_PANIC_EVENT 43 help 44 When a panic occurs, this will cause the IPMI message handler to, 45 by default, generate IPMI OEM type f0 events holding the IPMB 46 address of the panic generator (byte 4 of the event), a sequence 47 number for the string (byte 5 of the event) and part of the 48 string (the rest of the event). Bytes 1, 2, and 3 are the normal 49 usage for an OEM event. You can fetch these events and use the 50 sequence numbers to piece the string together. This config 51 parameter sets the default value to generate these events, 52 the module parameter for ipmi_msghandler named panic_op can 53 be set to "string" to chose this value, this config simply 54 causes the default value to be set to "string". 55 56config IPMI_DEVICE_INTERFACE 57 tristate 'Device interface for IPMI' 58 help 59 This provides an IOCTL interface to the IPMI message handler so 60 userland processes may use IPMI. It supports poll() and select(). 61 62config IPMI_SI 63 tristate 'IPMI System Interface handler' 64 select IPMI_PLAT_DATA 65 help 66 Provides a driver for System Interfaces (KCS, SMIC, BT). 67 Currently, only KCS and SMIC are supported. If 68 you are using IPMI, you should probably say "y" here. 69 70config IPMI_SSIF 71 tristate 'IPMI SMBus handler (SSIF)' 72 select I2C 73 help 74 Provides a driver for a SMBus interface to a BMC, meaning that you 75 have a driver that must be accessed over an I2C bus instead of a 76 standard interface. This module requires I2C support. 77 78config IPMI_POWERNV 79 depends on PPC_POWERNV 80 tristate 'POWERNV (OPAL firmware) IPMI interface' 81 help 82 Provides a driver for OPAL firmware-based IPMI interfaces. 83 84config IPMI_WATCHDOG 85 tristate 'IPMI Watchdog Timer' 86 help 87 This enables the IPMI watchdog timer. 88 89config IPMI_POWEROFF 90 tristate 'IPMI Poweroff' 91 help 92 This enables a function to power off the system with IPMI if 93 the IPMI management controller is capable of this. 94 95endif # IPMI_HANDLER 96 97config IPMI_KCS_BMC 98 tristate 99 100config ASPEED_KCS_IPMI_BMC 101 depends on ARCH_ASPEED || COMPILE_TEST 102 select IPMI_KCS_BMC 103 select REGMAP_MMIO 104 tristate "Aspeed KCS IPMI BMC driver" 105 help 106 Provides a driver for the KCS (Keyboard Controller Style) IPMI 107 interface found on Aspeed SOCs (AST2400 and AST2500). 108 109 The driver implements the BMC side of the KCS contorller, it 110 provides the access of KCS IO space for BMC side. 111 112config NPCM7XX_KCS_IPMI_BMC 113 depends on ARCH_NPCM7XX || COMPILE_TEST 114 select IPMI_KCS_BMC 115 select REGMAP_MMIO 116 tristate "NPCM7xx KCS IPMI BMC driver" 117 help 118 Provides a driver for the KCS (Keyboard Controller Style) IPMI 119 interface found on Nuvoton NPCM7xx SOCs. 120 121 The driver implements the BMC side of the KCS contorller, it 122 provides the access of KCS IO space for BMC side. 123 124 This support is also available as a module. If so, the module 125 will be called kcs_bmc_npcm7xx. 126 127config ASPEED_BT_IPMI_BMC 128 depends on ARCH_ASPEED || COMPILE_TEST 129 depends on REGMAP && REGMAP_MMIO && MFD_SYSCON 130 tristate "BT IPMI bmc driver" 131 help 132 Provides a driver for the BT (Block Transfer) IPMI interface 133 found on Aspeed SOCs (AST2400 and AST2500). The driver 134 implements the BMC side of the BT interface. 135 136config IPMB_DEVICE_INTERFACE 137 tristate 'IPMB Interface handler' 138 depends on I2C 139 depends on I2C_SLAVE 140 help 141 Provides a driver for a device (Satellite MC) to 142 receive requests and send responses back to the BMC via 143 the IPMB interface. This module requires I2C support. 144