xref: /linux/drivers/char/agp/via-agp.c (revision 6fdcba32711044c35c0e1b094cbd8f3f0b4472c9)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * VIA AGPGART routines.
4  */
5 
6 #include <linux/types.h>
7 #include <linux/module.h>
8 #include <linux/pci.h>
9 #include <linux/init.h>
10 #include <linux/agp_backend.h>
11 #include "agp.h"
12 
13 static const struct pci_device_id agp_via_pci_table[];
14 
15 #define VIA_GARTCTRL	0x80
16 #define VIA_APSIZE	0x84
17 #define VIA_ATTBASE	0x88
18 
19 #define VIA_AGP3_GARTCTRL	0x90
20 #define VIA_AGP3_APSIZE		0x94
21 #define VIA_AGP3_ATTBASE	0x98
22 #define VIA_AGPSEL		0xfd
23 
24 static int via_fetch_size(void)
25 {
26 	int i;
27 	u8 temp;
28 	struct aper_size_info_8 *values;
29 
30 	values = A_SIZE_8(agp_bridge->driver->aperture_sizes);
31 	pci_read_config_byte(agp_bridge->dev, VIA_APSIZE, &temp);
32 	for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
33 		if (temp == values[i].size_value) {
34 			agp_bridge->previous_size =
35 			    agp_bridge->current_size = (void *) (values + i);
36 			agp_bridge->aperture_size_idx = i;
37 			return values[i].size;
38 		}
39 	}
40 	printk(KERN_ERR PFX "Unknown aperture size from AGP bridge (0x%x)\n", temp);
41 	return 0;
42 }
43 
44 
45 static int via_configure(void)
46 {
47 	struct aper_size_info_8 *current_size;
48 
49 	current_size = A_SIZE_8(agp_bridge->current_size);
50 	/* aperture size */
51 	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
52 			      current_size->size_value);
53 	/* address to map to */
54 	agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
55 						    AGP_APERTURE_BAR);
56 
57 	/* GART control register */
58 	pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, 0x0000000f);
59 
60 	/* attbase - aperture GATT base */
61 	pci_write_config_dword(agp_bridge->dev, VIA_ATTBASE,
62 			    (agp_bridge->gatt_bus_addr & 0xfffff000) | 3);
63 	return 0;
64 }
65 
66 
67 static void via_cleanup(void)
68 {
69 	struct aper_size_info_8 *previous_size;
70 
71 	previous_size = A_SIZE_8(agp_bridge->previous_size);
72 	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
73 			      previous_size->size_value);
74 	/* Do not disable by writing 0 to VIA_ATTBASE, it screws things up
75 	 * during reinitialization.
76 	 */
77 }
78 
79 
80 static void via_tlbflush(struct agp_memory *mem)
81 {
82 	u32 temp;
83 
84 	pci_read_config_dword(agp_bridge->dev, VIA_GARTCTRL, &temp);
85 	temp |= (1<<7);
86 	pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, temp);
87 	temp &= ~(1<<7);
88 	pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, temp);
89 }
90 
91 
92 static const struct aper_size_info_8 via_generic_sizes[9] =
93 {
94 	{256, 65536, 6, 0},
95 	{128, 32768, 5, 128},
96 	{64, 16384, 4, 192},
97 	{32, 8192, 3, 224},
98 	{16, 4096, 2, 240},
99 	{8, 2048, 1, 248},
100 	{4, 1024, 0, 252},
101 	{2, 512, 0, 254},
102 	{1, 256, 0, 255}
103 };
104 
105 
106 static int via_fetch_size_agp3(void)
107 {
108 	int i;
109 	u16 temp;
110 	struct aper_size_info_16 *values;
111 
112 	values = A_SIZE_16(agp_bridge->driver->aperture_sizes);
113 	pci_read_config_word(agp_bridge->dev, VIA_AGP3_APSIZE, &temp);
114 	temp &= 0xfff;
115 
116 	for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
117 		if (temp == values[i].size_value) {
118 			agp_bridge->previous_size =
119 				agp_bridge->current_size = (void *) (values + i);
120 			agp_bridge->aperture_size_idx = i;
121 			return values[i].size;
122 		}
123 	}
124 	return 0;
125 }
126 
127 
128 static int via_configure_agp3(void)
129 {
130 	u32 temp;
131 	struct aper_size_info_16 *current_size;
132 
133 	current_size = A_SIZE_16(agp_bridge->current_size);
134 
135 	/* address to map to */
136 	agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
137 						    AGP_APERTURE_BAR);
138 
139 	/* attbase - aperture GATT base */
140 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_ATTBASE,
141 		agp_bridge->gatt_bus_addr & 0xfffff000);
142 
143 	/* 1. Enable GTLB in RX90<7>, all AGP aperture access needs to fetch
144 	 *    translation table first.
145 	 * 2. Enable AGP aperture in RX91<0>. This bit controls the enabling of the
146 	 *    graphics AGP aperture for the AGP3.0 port.
147 	 */
148 	pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp);
149 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp | (3<<7));
150 	return 0;
151 }
152 
153 
154 static void via_cleanup_agp3(void)
155 {
156 	struct aper_size_info_16 *previous_size;
157 
158 	previous_size = A_SIZE_16(agp_bridge->previous_size);
159 	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE, previous_size->size_value);
160 }
161 
162 
163 static void via_tlbflush_agp3(struct agp_memory *mem)
164 {
165 	u32 temp;
166 
167 	pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp);
168 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp & ~(1<<7));
169 	pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp);
170 }
171 
172 
173 static const struct agp_bridge_driver via_agp3_driver = {
174 	.owner			= THIS_MODULE,
175 	.aperture_sizes		= agp3_generic_sizes,
176 	.size_type		= U8_APER_SIZE,
177 	.num_aperture_sizes	= 10,
178 	.needs_scratch_page	= true,
179 	.configure		= via_configure_agp3,
180 	.fetch_size		= via_fetch_size_agp3,
181 	.cleanup		= via_cleanup_agp3,
182 	.tlb_flush		= via_tlbflush_agp3,
183 	.mask_memory		= agp_generic_mask_memory,
184 	.masks			= NULL,
185 	.agp_enable		= agp_generic_enable,
186 	.cache_flush		= global_cache_flush,
187 	.create_gatt_table	= agp_generic_create_gatt_table,
188 	.free_gatt_table	= agp_generic_free_gatt_table,
189 	.insert_memory		= agp_generic_insert_memory,
190 	.remove_memory		= agp_generic_remove_memory,
191 	.alloc_by_type		= agp_generic_alloc_by_type,
192 	.free_by_type		= agp_generic_free_by_type,
193 	.agp_alloc_page		= agp_generic_alloc_page,
194 	.agp_alloc_pages	= agp_generic_alloc_pages,
195 	.agp_destroy_page	= agp_generic_destroy_page,
196 	.agp_destroy_pages	= agp_generic_destroy_pages,
197 	.agp_type_to_mask_type  = agp_generic_type_to_mask_type,
198 };
199 
200 static const struct agp_bridge_driver via_driver = {
201 	.owner			= THIS_MODULE,
202 	.aperture_sizes		= via_generic_sizes,
203 	.size_type		= U8_APER_SIZE,
204 	.num_aperture_sizes	= 9,
205 	.needs_scratch_page	= true,
206 	.configure		= via_configure,
207 	.fetch_size		= via_fetch_size,
208 	.cleanup		= via_cleanup,
209 	.tlb_flush		= via_tlbflush,
210 	.mask_memory		= agp_generic_mask_memory,
211 	.masks			= NULL,
212 	.agp_enable		= agp_generic_enable,
213 	.cache_flush		= global_cache_flush,
214 	.create_gatt_table	= agp_generic_create_gatt_table,
215 	.free_gatt_table	= agp_generic_free_gatt_table,
216 	.insert_memory		= agp_generic_insert_memory,
217 	.remove_memory		= agp_generic_remove_memory,
218 	.alloc_by_type		= agp_generic_alloc_by_type,
219 	.free_by_type		= agp_generic_free_by_type,
220 	.agp_alloc_page		= agp_generic_alloc_page,
221 	.agp_alloc_pages	= agp_generic_alloc_pages,
222 	.agp_destroy_page	= agp_generic_destroy_page,
223 	.agp_destroy_pages	= agp_generic_destroy_pages,
224 	.agp_type_to_mask_type  = agp_generic_type_to_mask_type,
225 };
226 
227 static struct agp_device_ids via_agp_device_ids[] =
228 {
229 	{
230 		.device_id	= PCI_DEVICE_ID_VIA_82C597_0,
231 		.chipset_name	= "Apollo VP3",
232 	},
233 
234 	{
235 		.device_id	= PCI_DEVICE_ID_VIA_82C598_0,
236 		.chipset_name	= "Apollo MVP3",
237 	},
238 
239 	{
240 		.device_id	= PCI_DEVICE_ID_VIA_8501_0,
241 		.chipset_name	= "Apollo MVP4",
242 	},
243 
244 	/* VT8601 */
245 	{
246 		.device_id	= PCI_DEVICE_ID_VIA_8601_0,
247 		.chipset_name	= "Apollo ProMedia/PLE133Ta",
248 	},
249 
250 	/* VT82C693A / VT28C694T */
251 	{
252 		.device_id	= PCI_DEVICE_ID_VIA_82C691_0,
253 		.chipset_name	= "Apollo Pro 133",
254 	},
255 
256 	{
257 		.device_id	= PCI_DEVICE_ID_VIA_8371_0,
258 		.chipset_name	= "KX133",
259 	},
260 
261 	/* VT8633 */
262 	{
263 		.device_id	= PCI_DEVICE_ID_VIA_8633_0,
264 		.chipset_name	= "Pro 266",
265 	},
266 
267 	{
268 		.device_id	= PCI_DEVICE_ID_VIA_XN266,
269 		.chipset_name	= "Apollo Pro266",
270 	},
271 
272 	/* VT8361 */
273 	{
274 		.device_id	= PCI_DEVICE_ID_VIA_8361,
275 		.chipset_name	= "KLE133",
276 	},
277 
278 	/* VT8365 / VT8362 */
279 	{
280 		.device_id	= PCI_DEVICE_ID_VIA_8363_0,
281 		.chipset_name	= "Twister-K/KT133x/KM133",
282 	},
283 
284 	/* VT8753A */
285 	{
286 		.device_id	= PCI_DEVICE_ID_VIA_8753_0,
287 		.chipset_name	= "P4X266",
288 	},
289 
290 	/* VT8366 */
291 	{
292 		.device_id	= PCI_DEVICE_ID_VIA_8367_0,
293 		.chipset_name	= "KT266/KY266x/KT333",
294 	},
295 
296 	/* VT8633 (for CuMine/ Celeron) */
297 	{
298 		.device_id	= PCI_DEVICE_ID_VIA_8653_0,
299 		.chipset_name	= "Pro266T",
300 	},
301 
302 	/* KM266 / PM266 */
303 	{
304 		.device_id	= PCI_DEVICE_ID_VIA_XM266,
305 		.chipset_name	= "PM266/KM266",
306 	},
307 
308 	/* CLE266 */
309 	{
310 		.device_id	= PCI_DEVICE_ID_VIA_862X_0,
311 		.chipset_name	= "CLE266",
312 	},
313 
314 	{
315 		.device_id	= PCI_DEVICE_ID_VIA_8377_0,
316 		.chipset_name	= "KT400/KT400A/KT600",
317 	},
318 
319 	/* VT8604 / VT8605 / VT8603
320 	 * (Apollo Pro133A chipset with S3 Savage4) */
321 	{
322 		.device_id	= PCI_DEVICE_ID_VIA_8605_0,
323 		.chipset_name	= "ProSavage PM133/PL133/PN133"
324 	},
325 
326 	/* P4M266x/P4N266 */
327 	{
328 		.device_id	= PCI_DEVICE_ID_VIA_8703_51_0,
329 		.chipset_name	= "P4M266x/P4N266",
330 	},
331 
332 	/* VT8754 */
333 	{
334 		.device_id	= PCI_DEVICE_ID_VIA_8754C_0,
335 		.chipset_name	= "PT800",
336 	},
337 
338 	/* P4X600 */
339 	{
340 		.device_id	= PCI_DEVICE_ID_VIA_8763_0,
341 		.chipset_name	= "P4X600"
342 	},
343 
344 	/* KM400 */
345 	{
346 		.device_id	= PCI_DEVICE_ID_VIA_8378_0,
347 		.chipset_name	= "KM400/KM400A",
348 	},
349 
350 	/* PT880 */
351 	{
352 		.device_id	= PCI_DEVICE_ID_VIA_PT880,
353 		.chipset_name	= "PT880",
354 	},
355 
356 	/* PT880 Ultra */
357 	{
358 		.device_id	= PCI_DEVICE_ID_VIA_PT880ULTRA,
359 		.chipset_name	= "PT880 Ultra",
360 	},
361 
362 	/* PT890 */
363 	{
364 		.device_id	= PCI_DEVICE_ID_VIA_8783_0,
365 		.chipset_name	= "PT890",
366 	},
367 
368 	/* PM800/PN800/PM880/PN880 */
369 	{
370 		.device_id	= PCI_DEVICE_ID_VIA_PX8X0_0,
371 		.chipset_name	= "PM800/PN800/PM880/PN880",
372 	},
373 	/* KT880 */
374 	{
375 		.device_id	= PCI_DEVICE_ID_VIA_3269_0,
376 		.chipset_name	= "KT880",
377 	},
378 	/* KTxxx/Px8xx */
379 	{
380 		.device_id	= PCI_DEVICE_ID_VIA_83_87XX_1,
381 		.chipset_name	= "VT83xx/VT87xx/KTxxx/Px8xx",
382 	},
383 	/* P4M800 */
384 	{
385 		.device_id	= PCI_DEVICE_ID_VIA_3296_0,
386 		.chipset_name	= "P4M800",
387 	},
388 	/* P4M800CE */
389 	{
390 		.device_id	= PCI_DEVICE_ID_VIA_P4M800CE,
391 		.chipset_name	= "VT3314",
392 	},
393 	/* VT3324 / CX700 */
394 	{
395 		.device_id  = PCI_DEVICE_ID_VIA_VT3324,
396 		.chipset_name   = "CX700",
397 	},
398 	/* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique
399 	 * architecture, the AGP resource and behavior are different from
400 	 * the traditional AGP which resides only in chipset. AGP is used
401 	 * by 3D driver which wasn't available for the VT3336 and VT3364
402 	 * generation until now.  Unfortunately, by testing, VT3364 works
403 	 * but VT3336 doesn't. - explanation from via, just leave this as
404 	 * as a placeholder to avoid future patches adding it back in.
405 	 */
406 #if 0
407 	{
408 		.device_id  = PCI_DEVICE_ID_VIA_VT3336,
409 		.chipset_name   = "VT3336",
410 	},
411 #endif
412 	/* P4M890 */
413 	{
414 		.device_id  = PCI_DEVICE_ID_VIA_P4M890,
415 		.chipset_name   = "P4M890",
416 	},
417 	/* P4M900 */
418 	{
419 		.device_id  = PCI_DEVICE_ID_VIA_VT3364,
420 		.chipset_name   = "P4M900",
421 	},
422 	{ }, /* dummy final entry, always present */
423 };
424 
425 
426 /*
427  * VIA's AGP3 chipsets do magick to put the AGP bridge compliant
428  * with the same standards version as the graphics card.
429  */
430 static void check_via_agp3 (struct agp_bridge_data *bridge)
431 {
432 	u8 reg;
433 
434 	pci_read_config_byte(bridge->dev, VIA_AGPSEL, &reg);
435 	/* Check AGP 2.0 compatibility mode. */
436 	if ((reg & (1<<1))==0)
437 		bridge->driver = &via_agp3_driver;
438 }
439 
440 
441 static int agp_via_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
442 {
443 	struct agp_device_ids *devs = via_agp_device_ids;
444 	struct agp_bridge_data *bridge;
445 	int j = 0;
446 	u8 cap_ptr;
447 
448 	cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
449 	if (!cap_ptr)
450 		return -ENODEV;
451 
452 	j = ent - agp_via_pci_table;
453 	printk (KERN_INFO PFX "Detected VIA %s chipset\n", devs[j].chipset_name);
454 
455 	bridge = agp_alloc_bridge();
456 	if (!bridge)
457 		return -ENOMEM;
458 
459 	bridge->dev = pdev;
460 	bridge->capndx = cap_ptr;
461 	bridge->driver = &via_driver;
462 
463 	/*
464 	 * Garg, there are KT400s with KT266 IDs.
465 	 */
466 	if (pdev->device == PCI_DEVICE_ID_VIA_8367_0) {
467 		/* Is there a KT400 subsystem ? */
468 		if (pdev->subsystem_device == PCI_DEVICE_ID_VIA_8377_0) {
469 			printk(KERN_INFO PFX "Found KT400 in disguise as a KT266.\n");
470 			check_via_agp3(bridge);
471 		}
472 	}
473 
474 	/* If this is an AGP3 bridge, check which mode its in and adjust. */
475 	get_agp_version(bridge);
476 	if (bridge->major_version >= 3)
477 		check_via_agp3(bridge);
478 
479 	/* Fill in the mode register */
480 	pci_read_config_dword(pdev,
481 			bridge->capndx+PCI_AGP_STATUS, &bridge->mode);
482 
483 	pci_set_drvdata(pdev, bridge);
484 	return agp_add_bridge(bridge);
485 }
486 
487 static void agp_via_remove(struct pci_dev *pdev)
488 {
489 	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
490 
491 	agp_remove_bridge(bridge);
492 	agp_put_bridge(bridge);
493 }
494 
495 #ifdef CONFIG_PM
496 
497 static int agp_via_suspend(struct pci_dev *pdev, pm_message_t state)
498 {
499 	pci_save_state (pdev);
500 	pci_set_power_state (pdev, PCI_D3hot);
501 
502 	return 0;
503 }
504 
505 static int agp_via_resume(struct pci_dev *pdev)
506 {
507 	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
508 
509 	pci_set_power_state (pdev, PCI_D0);
510 	pci_restore_state(pdev);
511 
512 	if (bridge->driver == &via_agp3_driver)
513 		return via_configure_agp3();
514 	else if (bridge->driver == &via_driver)
515 		return via_configure();
516 
517 	return 0;
518 }
519 
520 #endif /* CONFIG_PM */
521 
522 /* must be the same order as name table above */
523 static const struct pci_device_id agp_via_pci_table[] = {
524 #define ID(x) \
525 	{						\
526 	.class		= (PCI_CLASS_BRIDGE_HOST << 8),	\
527 	.class_mask	= ~0,				\
528 	.vendor		= PCI_VENDOR_ID_VIA,		\
529 	.device		= x,				\
530 	.subvendor	= PCI_ANY_ID,			\
531 	.subdevice	= PCI_ANY_ID,			\
532 	}
533 	ID(PCI_DEVICE_ID_VIA_82C597_0),
534 	ID(PCI_DEVICE_ID_VIA_82C598_0),
535 	ID(PCI_DEVICE_ID_VIA_8501_0),
536 	ID(PCI_DEVICE_ID_VIA_8601_0),
537 	ID(PCI_DEVICE_ID_VIA_82C691_0),
538 	ID(PCI_DEVICE_ID_VIA_8371_0),
539 	ID(PCI_DEVICE_ID_VIA_8633_0),
540 	ID(PCI_DEVICE_ID_VIA_XN266),
541 	ID(PCI_DEVICE_ID_VIA_8361),
542 	ID(PCI_DEVICE_ID_VIA_8363_0),
543 	ID(PCI_DEVICE_ID_VIA_8753_0),
544 	ID(PCI_DEVICE_ID_VIA_8367_0),
545 	ID(PCI_DEVICE_ID_VIA_8653_0),
546 	ID(PCI_DEVICE_ID_VIA_XM266),
547 	ID(PCI_DEVICE_ID_VIA_862X_0),
548 	ID(PCI_DEVICE_ID_VIA_8377_0),
549 	ID(PCI_DEVICE_ID_VIA_8605_0),
550 	ID(PCI_DEVICE_ID_VIA_8703_51_0),
551 	ID(PCI_DEVICE_ID_VIA_8754C_0),
552 	ID(PCI_DEVICE_ID_VIA_8763_0),
553 	ID(PCI_DEVICE_ID_VIA_8378_0),
554 	ID(PCI_DEVICE_ID_VIA_PT880),
555 	ID(PCI_DEVICE_ID_VIA_PT880ULTRA),
556 	ID(PCI_DEVICE_ID_VIA_8783_0),
557 	ID(PCI_DEVICE_ID_VIA_PX8X0_0),
558 	ID(PCI_DEVICE_ID_VIA_3269_0),
559 	ID(PCI_DEVICE_ID_VIA_83_87XX_1),
560 	ID(PCI_DEVICE_ID_VIA_3296_0),
561 	ID(PCI_DEVICE_ID_VIA_P4M800CE),
562 	ID(PCI_DEVICE_ID_VIA_VT3324),
563 	ID(PCI_DEVICE_ID_VIA_P4M890),
564 	ID(PCI_DEVICE_ID_VIA_VT3364),
565 	{ }
566 };
567 
568 MODULE_DEVICE_TABLE(pci, agp_via_pci_table);
569 
570 
571 static struct pci_driver agp_via_pci_driver = {
572 	.name		= "agpgart-via",
573 	.id_table	= agp_via_pci_table,
574 	.probe		= agp_via_probe,
575 	.remove		= agp_via_remove,
576 #ifdef CONFIG_PM
577 	.suspend	= agp_via_suspend,
578 	.resume		= agp_via_resume,
579 #endif
580 };
581 
582 
583 static int __init agp_via_init(void)
584 {
585 	if (agp_off)
586 		return -EINVAL;
587 	return pci_register_driver(&agp_via_pci_driver);
588 }
589 
590 static void __exit agp_via_cleanup(void)
591 {
592 	pci_unregister_driver(&agp_via_pci_driver);
593 }
594 
595 module_init(agp_via_init);
596 module_exit(agp_via_cleanup);
597 
598 MODULE_LICENSE("GPL");
599 MODULE_AUTHOR("Dave Jones");
600