1 /* 2 * 3 * A driver for Nokia Connectivity Card DTL-1 devices 4 * 5 * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org> 6 * 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation; 11 * 12 * Software distributed under the License is distributed on an "AS 13 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or 14 * implied. See the License for the specific language governing 15 * rights and limitations under the License. 16 * 17 * The initial developer of the original code is David A. Hinds 18 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds 19 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. 20 * 21 */ 22 23 #include <linux/config.h> 24 #include <linux/module.h> 25 26 #include <linux/kernel.h> 27 #include <linux/init.h> 28 #include <linux/slab.h> 29 #include <linux/types.h> 30 #include <linux/sched.h> 31 #include <linux/delay.h> 32 #include <linux/errno.h> 33 #include <linux/ptrace.h> 34 #include <linux/ioport.h> 35 #include <linux/spinlock.h> 36 #include <linux/moduleparam.h> 37 38 #include <linux/skbuff.h> 39 #include <linux/string.h> 40 #include <linux/serial.h> 41 #include <linux/serial_reg.h> 42 #include <linux/bitops.h> 43 #include <asm/system.h> 44 #include <asm/io.h> 45 46 #include <pcmcia/cs_types.h> 47 #include <pcmcia/cs.h> 48 #include <pcmcia/cistpl.h> 49 #include <pcmcia/ciscode.h> 50 #include <pcmcia/ds.h> 51 #include <pcmcia/cisreg.h> 52 53 #include <net/bluetooth/bluetooth.h> 54 #include <net/bluetooth/hci_core.h> 55 56 57 58 /* ======================== Module parameters ======================== */ 59 60 61 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); 62 MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1"); 63 MODULE_LICENSE("GPL"); 64 65 66 67 /* ======================== Local structures ======================== */ 68 69 70 typedef struct dtl1_info_t { 71 struct pcmcia_device *p_dev; 72 dev_node_t node; 73 74 struct hci_dev *hdev; 75 76 spinlock_t lock; /* For serializing operations */ 77 78 unsigned long flowmask; /* HCI flow mask */ 79 int ri_latch; 80 81 struct sk_buff_head txq; 82 unsigned long tx_state; 83 84 unsigned long rx_state; 85 unsigned long rx_count; 86 struct sk_buff *rx_skb; 87 } dtl1_info_t; 88 89 90 static int dtl1_config(struct pcmcia_device *link); 91 static void dtl1_release(struct pcmcia_device *link); 92 93 static void dtl1_detach(struct pcmcia_device *p_dev); 94 95 96 /* Transmit states */ 97 #define XMIT_SENDING 1 98 #define XMIT_WAKEUP 2 99 #define XMIT_WAITING 8 100 101 /* Receiver States */ 102 #define RECV_WAIT_NSH 0 103 #define RECV_WAIT_DATA 1 104 105 106 typedef struct { 107 u8 type; 108 u8 zero; 109 u16 len; 110 } __attribute__ ((packed)) nsh_t; /* Nokia Specific Header */ 111 112 #define NSHL 4 /* Nokia Specific Header Length */ 113 114 115 116 /* ======================== Interrupt handling ======================== */ 117 118 119 static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) 120 { 121 int actual = 0; 122 123 /* Tx FIFO should be empty */ 124 if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) 125 return 0; 126 127 /* Fill FIFO with current frame */ 128 while ((fifo_size-- > 0) && (actual < len)) { 129 /* Transmit next byte */ 130 outb(buf[actual], iobase + UART_TX); 131 actual++; 132 } 133 134 return actual; 135 } 136 137 138 static void dtl1_write_wakeup(dtl1_info_t *info) 139 { 140 if (!info) { 141 BT_ERR("Unknown device"); 142 return; 143 } 144 145 if (test_bit(XMIT_WAITING, &(info->tx_state))) { 146 set_bit(XMIT_WAKEUP, &(info->tx_state)); 147 return; 148 } 149 150 if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) { 151 set_bit(XMIT_WAKEUP, &(info->tx_state)); 152 return; 153 } 154 155 do { 156 register unsigned int iobase = info->p_dev->io.BasePort1; 157 register struct sk_buff *skb; 158 register int len; 159 160 clear_bit(XMIT_WAKEUP, &(info->tx_state)); 161 162 if (!pcmcia_dev_present(info->p_dev)) 163 return; 164 165 if (!(skb = skb_dequeue(&(info->txq)))) 166 break; 167 168 /* Send frame */ 169 len = dtl1_write(iobase, 32, skb->data, skb->len); 170 171 if (len == skb->len) { 172 set_bit(XMIT_WAITING, &(info->tx_state)); 173 kfree_skb(skb); 174 } else { 175 skb_pull(skb, len); 176 skb_queue_head(&(info->txq), skb); 177 } 178 179 info->hdev->stat.byte_tx += len; 180 181 } while (test_bit(XMIT_WAKEUP, &(info->tx_state))); 182 183 clear_bit(XMIT_SENDING, &(info->tx_state)); 184 } 185 186 187 static void dtl1_control(dtl1_info_t *info, struct sk_buff *skb) 188 { 189 u8 flowmask = *(u8 *)skb->data; 190 int i; 191 192 printk(KERN_INFO "Bluetooth: Nokia control data ="); 193 for (i = 0; i < skb->len; i++) { 194 printk(" %02x", skb->data[i]); 195 } 196 printk("\n"); 197 198 /* transition to active state */ 199 if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) { 200 clear_bit(XMIT_WAITING, &(info->tx_state)); 201 dtl1_write_wakeup(info); 202 } 203 204 info->flowmask = flowmask; 205 206 kfree_skb(skb); 207 } 208 209 210 static void dtl1_receive(dtl1_info_t *info) 211 { 212 unsigned int iobase; 213 nsh_t *nsh; 214 int boguscount = 0; 215 216 if (!info) { 217 BT_ERR("Unknown device"); 218 return; 219 } 220 221 iobase = info->p_dev->io.BasePort1; 222 223 do { 224 info->hdev->stat.byte_rx++; 225 226 /* Allocate packet */ 227 if (info->rx_skb == NULL) 228 if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) { 229 BT_ERR("Can't allocate mem for new packet"); 230 info->rx_state = RECV_WAIT_NSH; 231 info->rx_count = NSHL; 232 return; 233 } 234 235 *skb_put(info->rx_skb, 1) = inb(iobase + UART_RX); 236 nsh = (nsh_t *)info->rx_skb->data; 237 238 info->rx_count--; 239 240 if (info->rx_count == 0) { 241 242 switch (info->rx_state) { 243 case RECV_WAIT_NSH: 244 info->rx_state = RECV_WAIT_DATA; 245 info->rx_count = nsh->len + (nsh->len & 0x0001); 246 break; 247 case RECV_WAIT_DATA: 248 bt_cb(info->rx_skb)->pkt_type = nsh->type; 249 250 /* remove PAD byte if it exists */ 251 if (nsh->len & 0x0001) { 252 info->rx_skb->tail--; 253 info->rx_skb->len--; 254 } 255 256 /* remove NSH */ 257 skb_pull(info->rx_skb, NSHL); 258 259 switch (bt_cb(info->rx_skb)->pkt_type) { 260 case 0x80: 261 /* control data for the Nokia Card */ 262 dtl1_control(info, info->rx_skb); 263 break; 264 case 0x82: 265 case 0x83: 266 case 0x84: 267 /* send frame to the HCI layer */ 268 info->rx_skb->dev = (void *) info->hdev; 269 bt_cb(info->rx_skb)->pkt_type &= 0x0f; 270 hci_recv_frame(info->rx_skb); 271 break; 272 default: 273 /* unknown packet */ 274 BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type); 275 kfree_skb(info->rx_skb); 276 break; 277 } 278 279 info->rx_state = RECV_WAIT_NSH; 280 info->rx_count = NSHL; 281 info->rx_skb = NULL; 282 break; 283 } 284 285 } 286 287 /* Make sure we don't stay here too long */ 288 if (boguscount++ > 32) 289 break; 290 291 } while (inb(iobase + UART_LSR) & UART_LSR_DR); 292 } 293 294 295 static irqreturn_t dtl1_interrupt(int irq, void *dev_inst, struct pt_regs *regs) 296 { 297 dtl1_info_t *info = dev_inst; 298 unsigned int iobase; 299 unsigned char msr; 300 int boguscount = 0; 301 int iir, lsr; 302 303 if (!info || !info->hdev) { 304 BT_ERR("Call of irq %d for unknown device", irq); 305 return IRQ_NONE; 306 } 307 308 iobase = info->p_dev->io.BasePort1; 309 310 spin_lock(&(info->lock)); 311 312 iir = inb(iobase + UART_IIR) & UART_IIR_ID; 313 while (iir) { 314 315 /* Clear interrupt */ 316 lsr = inb(iobase + UART_LSR); 317 318 switch (iir) { 319 case UART_IIR_RLSI: 320 BT_ERR("RLSI"); 321 break; 322 case UART_IIR_RDI: 323 /* Receive interrupt */ 324 dtl1_receive(info); 325 break; 326 case UART_IIR_THRI: 327 if (lsr & UART_LSR_THRE) { 328 /* Transmitter ready for data */ 329 dtl1_write_wakeup(info); 330 } 331 break; 332 default: 333 BT_ERR("Unhandled IIR=%#x", iir); 334 break; 335 } 336 337 /* Make sure we don't stay here too long */ 338 if (boguscount++ > 100) 339 break; 340 341 iir = inb(iobase + UART_IIR) & UART_IIR_ID; 342 343 } 344 345 msr = inb(iobase + UART_MSR); 346 347 if (info->ri_latch ^ (msr & UART_MSR_RI)) { 348 info->ri_latch = msr & UART_MSR_RI; 349 clear_bit(XMIT_WAITING, &(info->tx_state)); 350 dtl1_write_wakeup(info); 351 } 352 353 spin_unlock(&(info->lock)); 354 355 return IRQ_HANDLED; 356 } 357 358 359 360 /* ======================== HCI interface ======================== */ 361 362 363 static int dtl1_hci_open(struct hci_dev *hdev) 364 { 365 set_bit(HCI_RUNNING, &(hdev->flags)); 366 367 return 0; 368 } 369 370 371 static int dtl1_hci_flush(struct hci_dev *hdev) 372 { 373 dtl1_info_t *info = (dtl1_info_t *)(hdev->driver_data); 374 375 /* Drop TX queue */ 376 skb_queue_purge(&(info->txq)); 377 378 return 0; 379 } 380 381 382 static int dtl1_hci_close(struct hci_dev *hdev) 383 { 384 if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) 385 return 0; 386 387 dtl1_hci_flush(hdev); 388 389 return 0; 390 } 391 392 393 static int dtl1_hci_send_frame(struct sk_buff *skb) 394 { 395 dtl1_info_t *info; 396 struct hci_dev *hdev = (struct hci_dev *)(skb->dev); 397 struct sk_buff *s; 398 nsh_t nsh; 399 400 if (!hdev) { 401 BT_ERR("Frame for unknown HCI device (hdev=NULL)"); 402 return -ENODEV; 403 } 404 405 info = (dtl1_info_t *)(hdev->driver_data); 406 407 switch (bt_cb(skb)->pkt_type) { 408 case HCI_COMMAND_PKT: 409 hdev->stat.cmd_tx++; 410 nsh.type = 0x81; 411 break; 412 case HCI_ACLDATA_PKT: 413 hdev->stat.acl_tx++; 414 nsh.type = 0x82; 415 break; 416 case HCI_SCODATA_PKT: 417 hdev->stat.sco_tx++; 418 nsh.type = 0x83; 419 break; 420 }; 421 422 nsh.zero = 0; 423 nsh.len = skb->len; 424 425 s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC); 426 skb_reserve(s, NSHL); 427 memcpy(skb_put(s, skb->len), skb->data, skb->len); 428 if (skb->len & 0x0001) 429 *skb_put(s, 1) = 0; /* PAD */ 430 431 /* Prepend skb with Nokia frame header and queue */ 432 memcpy(skb_push(s, NSHL), &nsh, NSHL); 433 skb_queue_tail(&(info->txq), s); 434 435 dtl1_write_wakeup(info); 436 437 kfree_skb(skb); 438 439 return 0; 440 } 441 442 443 static void dtl1_hci_destruct(struct hci_dev *hdev) 444 { 445 } 446 447 448 static int dtl1_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg) 449 { 450 return -ENOIOCTLCMD; 451 } 452 453 454 455 /* ======================== Card services HCI interaction ======================== */ 456 457 458 static int dtl1_open(dtl1_info_t *info) 459 { 460 unsigned long flags; 461 unsigned int iobase = info->p_dev->io.BasePort1; 462 struct hci_dev *hdev; 463 464 spin_lock_init(&(info->lock)); 465 466 skb_queue_head_init(&(info->txq)); 467 468 info->rx_state = RECV_WAIT_NSH; 469 info->rx_count = NSHL; 470 info->rx_skb = NULL; 471 472 set_bit(XMIT_WAITING, &(info->tx_state)); 473 474 /* Initialize HCI device */ 475 hdev = hci_alloc_dev(); 476 if (!hdev) { 477 BT_ERR("Can't allocate HCI device"); 478 return -ENOMEM; 479 } 480 481 info->hdev = hdev; 482 483 hdev->type = HCI_PCCARD; 484 hdev->driver_data = info; 485 486 hdev->open = dtl1_hci_open; 487 hdev->close = dtl1_hci_close; 488 hdev->flush = dtl1_hci_flush; 489 hdev->send = dtl1_hci_send_frame; 490 hdev->destruct = dtl1_hci_destruct; 491 hdev->ioctl = dtl1_hci_ioctl; 492 493 hdev->owner = THIS_MODULE; 494 495 spin_lock_irqsave(&(info->lock), flags); 496 497 /* Reset UART */ 498 outb(0, iobase + UART_MCR); 499 500 /* Turn off interrupts */ 501 outb(0, iobase + UART_IER); 502 503 /* Initialize UART */ 504 outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */ 505 outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR); 506 507 info->ri_latch = inb(info->p_dev->io.BasePort1 + UART_MSR) & UART_MSR_RI; 508 509 /* Turn on interrupts */ 510 outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); 511 512 spin_unlock_irqrestore(&(info->lock), flags); 513 514 /* Timeout before it is safe to send the first HCI packet */ 515 msleep(2000); 516 517 /* Register HCI device */ 518 if (hci_register_dev(hdev) < 0) { 519 BT_ERR("Can't register HCI device"); 520 info->hdev = NULL; 521 hci_free_dev(hdev); 522 return -ENODEV; 523 } 524 525 return 0; 526 } 527 528 529 static int dtl1_close(dtl1_info_t *info) 530 { 531 unsigned long flags; 532 unsigned int iobase = info->p_dev->io.BasePort1; 533 struct hci_dev *hdev = info->hdev; 534 535 if (!hdev) 536 return -ENODEV; 537 538 dtl1_hci_close(hdev); 539 540 spin_lock_irqsave(&(info->lock), flags); 541 542 /* Reset UART */ 543 outb(0, iobase + UART_MCR); 544 545 /* Turn off interrupts */ 546 outb(0, iobase + UART_IER); 547 548 spin_unlock_irqrestore(&(info->lock), flags); 549 550 if (hci_unregister_dev(hdev) < 0) 551 BT_ERR("Can't unregister HCI device %s", hdev->name); 552 553 hci_free_dev(hdev); 554 555 return 0; 556 } 557 558 static int dtl1_probe(struct pcmcia_device *link) 559 { 560 dtl1_info_t *info; 561 562 /* Create new info device */ 563 info = kzalloc(sizeof(*info), GFP_KERNEL); 564 if (!info) 565 return -ENOMEM; 566 567 info->p_dev = link; 568 link->priv = info; 569 570 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; 571 link->io.NumPorts1 = 8; 572 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; 573 link->irq.IRQInfo1 = IRQ_LEVEL_ID; 574 575 link->irq.Handler = dtl1_interrupt; 576 link->irq.Instance = info; 577 578 link->conf.Attributes = CONF_ENABLE_IRQ; 579 link->conf.IntType = INT_MEMORY_AND_IO; 580 581 return dtl1_config(link); 582 } 583 584 585 static void dtl1_detach(struct pcmcia_device *link) 586 { 587 dtl1_info_t *info = link->priv; 588 589 dtl1_release(link); 590 591 kfree(info); 592 } 593 594 static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) 595 { 596 int i; 597 598 i = pcmcia_get_tuple_data(handle, tuple); 599 if (i != CS_SUCCESS) 600 return i; 601 602 return pcmcia_parse_tuple(handle, tuple, parse); 603 } 604 605 static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) 606 { 607 if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS) 608 return CS_NO_MORE_ITEMS; 609 return get_tuple(handle, tuple, parse); 610 } 611 612 static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) 613 { 614 if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS) 615 return CS_NO_MORE_ITEMS; 616 return get_tuple(handle, tuple, parse); 617 } 618 619 static int dtl1_config(struct pcmcia_device *link) 620 { 621 dtl1_info_t *info = link->priv; 622 tuple_t tuple; 623 u_short buf[256]; 624 cisparse_t parse; 625 cistpl_cftable_entry_t *cf = &parse.cftable_entry; 626 int i, last_ret, last_fn; 627 628 tuple.TupleData = (cisdata_t *)buf; 629 tuple.TupleOffset = 0; 630 tuple.TupleDataMax = 255; 631 tuple.Attributes = 0; 632 633 /* Get configuration register information */ 634 tuple.DesiredTuple = CISTPL_CONFIG; 635 last_ret = first_tuple(link, &tuple, &parse); 636 if (last_ret != CS_SUCCESS) { 637 last_fn = ParseTuple; 638 goto cs_failed; 639 } 640 link->conf.ConfigBase = parse.config.base; 641 link->conf.Present = parse.config.rmask[0]; 642 643 tuple.TupleData = (cisdata_t *)buf; 644 tuple.TupleOffset = 0; 645 tuple.TupleDataMax = 255; 646 tuple.Attributes = 0; 647 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; 648 649 /* Look for a generic full-sized window */ 650 link->io.NumPorts1 = 8; 651 i = first_tuple(link, &tuple, &parse); 652 while (i != CS_NO_MORE_ITEMS) { 653 if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { 654 link->conf.ConfigIndex = cf->index; 655 link->io.BasePort1 = cf->io.win[0].base; 656 link->io.NumPorts1 = cf->io.win[0].len; /*yo */ 657 link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; 658 i = pcmcia_request_io(link, &link->io); 659 if (i == CS_SUCCESS) 660 break; 661 } 662 i = next_tuple(link, &tuple, &parse); 663 } 664 665 if (i != CS_SUCCESS) { 666 cs_error(link, RequestIO, i); 667 goto failed; 668 } 669 670 i = pcmcia_request_irq(link, &link->irq); 671 if (i != CS_SUCCESS) { 672 cs_error(link, RequestIRQ, i); 673 link->irq.AssignedIRQ = 0; 674 } 675 676 i = pcmcia_request_configuration(link, &link->conf); 677 if (i != CS_SUCCESS) { 678 cs_error(link, RequestConfiguration, i); 679 goto failed; 680 } 681 682 if (dtl1_open(info) != 0) 683 goto failed; 684 685 strcpy(info->node.dev_name, info->hdev->name); 686 link->dev_node = &info->node; 687 688 return 0; 689 690 cs_failed: 691 cs_error(link, last_fn, last_ret); 692 693 failed: 694 dtl1_release(link); 695 return -ENODEV; 696 } 697 698 699 static void dtl1_release(struct pcmcia_device *link) 700 { 701 dtl1_info_t *info = link->priv; 702 703 dtl1_close(info); 704 705 pcmcia_disable_device(link); 706 } 707 708 709 static struct pcmcia_device_id dtl1_ids[] = { 710 PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d), 711 PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863), 712 PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3), 713 PCMCIA_DEVICE_NULL 714 }; 715 MODULE_DEVICE_TABLE(pcmcia, dtl1_ids); 716 717 static struct pcmcia_driver dtl1_driver = { 718 .owner = THIS_MODULE, 719 .drv = { 720 .name = "dtl1_cs", 721 }, 722 .probe = dtl1_probe, 723 .remove = dtl1_detach, 724 .id_table = dtl1_ids, 725 }; 726 727 static int __init init_dtl1_cs(void) 728 { 729 return pcmcia_register_driver(&dtl1_driver); 730 } 731 732 733 static void __exit exit_dtl1_cs(void) 734 { 735 pcmcia_unregister_driver(&dtl1_driver); 736 } 737 738 module_init(init_dtl1_cs); 739 module_exit(exit_dtl1_cs); 740