1 /* 2 * 3 * Generic Bluetooth USB driver 4 * 5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org> 6 * 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 21 * 22 */ 23 24 #include <linux/module.h> 25 #include <linux/usb.h> 26 #include <linux/firmware.h> 27 28 #include <net/bluetooth/bluetooth.h> 29 #include <net/bluetooth/hci_core.h> 30 31 #define VERSION "0.6" 32 33 static bool ignore_dga; 34 static bool ignore_csr; 35 static bool ignore_sniffer; 36 static bool disable_scofix; 37 static bool force_scofix; 38 39 static bool reset = 1; 40 41 static struct usb_driver btusb_driver; 42 43 #define BTUSB_IGNORE 0x01 44 #define BTUSB_DIGIANSWER 0x02 45 #define BTUSB_CSR 0x04 46 #define BTUSB_SNIFFER 0x08 47 #define BTUSB_BCM92035 0x10 48 #define BTUSB_BROKEN_ISOC 0x20 49 #define BTUSB_WRONG_SCO_MTU 0x40 50 #define BTUSB_ATH3012 0x80 51 #define BTUSB_INTEL 0x100 52 53 static const struct usb_device_id btusb_table[] = { 54 /* Generic Bluetooth USB device */ 55 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, 56 57 /* Apple-specific (Broadcom) devices */ 58 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) }, 59 60 /* MediaTek MT76x0E */ 61 { USB_DEVICE(0x0e8d, 0x763f) }, 62 63 /* Broadcom SoftSailing reporting vendor specific */ 64 { USB_DEVICE(0x0a5c, 0x21e1) }, 65 66 /* Apple MacBookPro 7,1 */ 67 { USB_DEVICE(0x05ac, 0x8213) }, 68 69 /* Apple iMac11,1 */ 70 { USB_DEVICE(0x05ac, 0x8215) }, 71 72 /* Apple MacBookPro6,2 */ 73 { USB_DEVICE(0x05ac, 0x8218) }, 74 75 /* Apple MacBookAir3,1, MacBookAir3,2 */ 76 { USB_DEVICE(0x05ac, 0x821b) }, 77 78 /* Apple MacBookAir4,1 */ 79 { USB_DEVICE(0x05ac, 0x821f) }, 80 81 /* Apple MacBookPro8,2 */ 82 { USB_DEVICE(0x05ac, 0x821a) }, 83 84 /* Apple MacMini5,1 */ 85 { USB_DEVICE(0x05ac, 0x8281) }, 86 87 /* AVM BlueFRITZ! USB v2.0 */ 88 { USB_DEVICE(0x057c, 0x3800) }, 89 90 /* Bluetooth Ultraport Module from IBM */ 91 { USB_DEVICE(0x04bf, 0x030a) }, 92 93 /* ALPS Modules with non-standard id */ 94 { USB_DEVICE(0x044e, 0x3001) }, 95 { USB_DEVICE(0x044e, 0x3002) }, 96 97 /* Ericsson with non-standard id */ 98 { USB_DEVICE(0x0bdb, 0x1002) }, 99 100 /* Canyon CN-BTU1 with HID interfaces */ 101 { USB_DEVICE(0x0c10, 0x0000) }, 102 103 /* Broadcom BCM20702A0 */ 104 { USB_DEVICE(0x0b05, 0x17b5) }, 105 { USB_DEVICE(0x0b05, 0x17cb) }, 106 { USB_DEVICE(0x04ca, 0x2003) }, 107 { USB_DEVICE(0x0489, 0xe042) }, 108 { USB_DEVICE(0x413c, 0x8197) }, 109 110 /* Foxconn - Hon Hai */ 111 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01) }, 112 113 /*Broadcom devices with vendor specific id */ 114 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, 115 116 /* Belkin F8065bf - Broadcom based */ 117 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) }, 118 119 { } /* Terminating entry */ 120 }; 121 122 MODULE_DEVICE_TABLE(usb, btusb_table); 123 124 static const struct usb_device_id blacklist_table[] = { 125 /* CSR BlueCore devices */ 126 { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR }, 127 128 /* Broadcom BCM2033 without firmware */ 129 { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE }, 130 131 /* Atheros 3011 with sflash firmware */ 132 { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, 133 { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, 134 { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, 135 { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, 136 { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, 137 { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE }, 138 139 /* Atheros AR9285 Malbec with sflash firmware */ 140 { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, 141 142 /* Atheros 3012 with sflash firmware */ 143 { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 }, 144 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, 145 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, 146 { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, 147 { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 }, 148 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, 149 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, 150 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, 151 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, 152 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, 153 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, 154 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, 155 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, 156 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, 157 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, 158 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, 159 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, 160 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, 161 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, 162 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, 163 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, 164 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, 165 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, 166 167 /* Atheros AR5BBU12 with sflash firmware */ 168 { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, 169 170 /* Atheros AR5BBU12 with sflash firmware */ 171 { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, 172 { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 }, 173 174 /* Broadcom BCM2035 */ 175 { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, 176 { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, 177 { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, 178 179 /* Broadcom BCM2045 */ 180 { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU }, 181 { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU }, 182 183 /* IBM/Lenovo ThinkPad with Broadcom chip */ 184 { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU }, 185 { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU }, 186 187 /* HP laptop with Broadcom chip */ 188 { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU }, 189 190 /* Dell laptop with Broadcom chip */ 191 { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU }, 192 193 /* Dell Wireless 370 and 410 devices */ 194 { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU }, 195 { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU }, 196 197 /* Belkin F8T012 and F8T013 devices */ 198 { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU }, 199 { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU }, 200 201 /* Asus WL-BTD202 device */ 202 { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU }, 203 204 /* Kensington Bluetooth USB adapter */ 205 { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU }, 206 207 /* RTX Telecom based adapters with buggy SCO support */ 208 { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC }, 209 { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC }, 210 211 /* CONWISE Technology based adapters with buggy SCO support */ 212 { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC }, 213 214 /* Digianswer devices */ 215 { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER }, 216 { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE }, 217 218 /* CSR BlueCore Bluetooth Sniffer */ 219 { USB_DEVICE(0x0a12, 0x0002), .driver_info = BTUSB_SNIFFER }, 220 221 /* Frontline ComProbe Bluetooth Sniffer */ 222 { USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER }, 223 224 /* Intel Bluetooth device */ 225 { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL }, 226 227 { } /* Terminating entry */ 228 }; 229 230 #define BTUSB_MAX_ISOC_FRAMES 10 231 232 #define BTUSB_INTR_RUNNING 0 233 #define BTUSB_BULK_RUNNING 1 234 #define BTUSB_ISOC_RUNNING 2 235 #define BTUSB_SUSPENDING 3 236 #define BTUSB_DID_ISO_RESUME 4 237 238 struct btusb_data { 239 struct hci_dev *hdev; 240 struct usb_device *udev; 241 struct usb_interface *intf; 242 struct usb_interface *isoc; 243 244 spinlock_t lock; 245 246 unsigned long flags; 247 248 struct work_struct work; 249 struct work_struct waker; 250 251 struct usb_anchor tx_anchor; 252 struct usb_anchor intr_anchor; 253 struct usb_anchor bulk_anchor; 254 struct usb_anchor isoc_anchor; 255 struct usb_anchor deferred; 256 int tx_in_flight; 257 spinlock_t txlock; 258 259 struct usb_endpoint_descriptor *intr_ep; 260 struct usb_endpoint_descriptor *bulk_tx_ep; 261 struct usb_endpoint_descriptor *bulk_rx_ep; 262 struct usb_endpoint_descriptor *isoc_tx_ep; 263 struct usb_endpoint_descriptor *isoc_rx_ep; 264 265 __u8 cmdreq_type; 266 267 unsigned int sco_num; 268 int isoc_altsetting; 269 int suspend_count; 270 }; 271 272 static int inc_tx(struct btusb_data *data) 273 { 274 unsigned long flags; 275 int rv; 276 277 spin_lock_irqsave(&data->txlock, flags); 278 rv = test_bit(BTUSB_SUSPENDING, &data->flags); 279 if (!rv) 280 data->tx_in_flight++; 281 spin_unlock_irqrestore(&data->txlock, flags); 282 283 return rv; 284 } 285 286 static void btusb_intr_complete(struct urb *urb) 287 { 288 struct hci_dev *hdev = urb->context; 289 struct btusb_data *data = hci_get_drvdata(hdev); 290 int err; 291 292 BT_DBG("%s urb %p status %d count %d", hdev->name, 293 urb, urb->status, urb->actual_length); 294 295 if (!test_bit(HCI_RUNNING, &hdev->flags)) 296 return; 297 298 if (urb->status == 0) { 299 hdev->stat.byte_rx += urb->actual_length; 300 301 if (hci_recv_fragment(hdev, HCI_EVENT_PKT, 302 urb->transfer_buffer, 303 urb->actual_length) < 0) { 304 BT_ERR("%s corrupted event packet", hdev->name); 305 hdev->stat.err_rx++; 306 } 307 } 308 309 if (!test_bit(BTUSB_INTR_RUNNING, &data->flags)) 310 return; 311 312 usb_mark_last_busy(data->udev); 313 usb_anchor_urb(urb, &data->intr_anchor); 314 315 err = usb_submit_urb(urb, GFP_ATOMIC); 316 if (err < 0) { 317 /* -EPERM: urb is being killed; 318 * -ENODEV: device got disconnected */ 319 if (err != -EPERM && err != -ENODEV) 320 BT_ERR("%s urb %p failed to resubmit (%d)", 321 hdev->name, urb, -err); 322 usb_unanchor_urb(urb); 323 } 324 } 325 326 static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) 327 { 328 struct btusb_data *data = hci_get_drvdata(hdev); 329 struct urb *urb; 330 unsigned char *buf; 331 unsigned int pipe; 332 int err, size; 333 334 BT_DBG("%s", hdev->name); 335 336 if (!data->intr_ep) 337 return -ENODEV; 338 339 urb = usb_alloc_urb(0, mem_flags); 340 if (!urb) 341 return -ENOMEM; 342 343 size = le16_to_cpu(data->intr_ep->wMaxPacketSize); 344 345 buf = kmalloc(size, mem_flags); 346 if (!buf) { 347 usb_free_urb(urb); 348 return -ENOMEM; 349 } 350 351 pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress); 352 353 usb_fill_int_urb(urb, data->udev, pipe, buf, size, 354 btusb_intr_complete, hdev, 355 data->intr_ep->bInterval); 356 357 urb->transfer_flags |= URB_FREE_BUFFER; 358 359 usb_anchor_urb(urb, &data->intr_anchor); 360 361 err = usb_submit_urb(urb, mem_flags); 362 if (err < 0) { 363 if (err != -EPERM && err != -ENODEV) 364 BT_ERR("%s urb %p submission failed (%d)", 365 hdev->name, urb, -err); 366 usb_unanchor_urb(urb); 367 } 368 369 usb_free_urb(urb); 370 371 return err; 372 } 373 374 static void btusb_bulk_complete(struct urb *urb) 375 { 376 struct hci_dev *hdev = urb->context; 377 struct btusb_data *data = hci_get_drvdata(hdev); 378 int err; 379 380 BT_DBG("%s urb %p status %d count %d", hdev->name, 381 urb, urb->status, urb->actual_length); 382 383 if (!test_bit(HCI_RUNNING, &hdev->flags)) 384 return; 385 386 if (urb->status == 0) { 387 hdev->stat.byte_rx += urb->actual_length; 388 389 if (hci_recv_fragment(hdev, HCI_ACLDATA_PKT, 390 urb->transfer_buffer, 391 urb->actual_length) < 0) { 392 BT_ERR("%s corrupted ACL packet", hdev->name); 393 hdev->stat.err_rx++; 394 } 395 } 396 397 if (!test_bit(BTUSB_BULK_RUNNING, &data->flags)) 398 return; 399 400 usb_anchor_urb(urb, &data->bulk_anchor); 401 usb_mark_last_busy(data->udev); 402 403 err = usb_submit_urb(urb, GFP_ATOMIC); 404 if (err < 0) { 405 /* -EPERM: urb is being killed; 406 * -ENODEV: device got disconnected */ 407 if (err != -EPERM && err != -ENODEV) 408 BT_ERR("%s urb %p failed to resubmit (%d)", 409 hdev->name, urb, -err); 410 usb_unanchor_urb(urb); 411 } 412 } 413 414 static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags) 415 { 416 struct btusb_data *data = hci_get_drvdata(hdev); 417 struct urb *urb; 418 unsigned char *buf; 419 unsigned int pipe; 420 int err, size = HCI_MAX_FRAME_SIZE; 421 422 BT_DBG("%s", hdev->name); 423 424 if (!data->bulk_rx_ep) 425 return -ENODEV; 426 427 urb = usb_alloc_urb(0, mem_flags); 428 if (!urb) 429 return -ENOMEM; 430 431 buf = kmalloc(size, mem_flags); 432 if (!buf) { 433 usb_free_urb(urb); 434 return -ENOMEM; 435 } 436 437 pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress); 438 439 usb_fill_bulk_urb(urb, data->udev, pipe, 440 buf, size, btusb_bulk_complete, hdev); 441 442 urb->transfer_flags |= URB_FREE_BUFFER; 443 444 usb_mark_last_busy(data->udev); 445 usb_anchor_urb(urb, &data->bulk_anchor); 446 447 err = usb_submit_urb(urb, mem_flags); 448 if (err < 0) { 449 if (err != -EPERM && err != -ENODEV) 450 BT_ERR("%s urb %p submission failed (%d)", 451 hdev->name, urb, -err); 452 usb_unanchor_urb(urb); 453 } 454 455 usb_free_urb(urb); 456 457 return err; 458 } 459 460 static void btusb_isoc_complete(struct urb *urb) 461 { 462 struct hci_dev *hdev = urb->context; 463 struct btusb_data *data = hci_get_drvdata(hdev); 464 int i, err; 465 466 BT_DBG("%s urb %p status %d count %d", hdev->name, 467 urb, urb->status, urb->actual_length); 468 469 if (!test_bit(HCI_RUNNING, &hdev->flags)) 470 return; 471 472 if (urb->status == 0) { 473 for (i = 0; i < urb->number_of_packets; i++) { 474 unsigned int offset = urb->iso_frame_desc[i].offset; 475 unsigned int length = urb->iso_frame_desc[i].actual_length; 476 477 if (urb->iso_frame_desc[i].status) 478 continue; 479 480 hdev->stat.byte_rx += length; 481 482 if (hci_recv_fragment(hdev, HCI_SCODATA_PKT, 483 urb->transfer_buffer + offset, 484 length) < 0) { 485 BT_ERR("%s corrupted SCO packet", hdev->name); 486 hdev->stat.err_rx++; 487 } 488 } 489 } 490 491 if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags)) 492 return; 493 494 usb_anchor_urb(urb, &data->isoc_anchor); 495 496 err = usb_submit_urb(urb, GFP_ATOMIC); 497 if (err < 0) { 498 /* -EPERM: urb is being killed; 499 * -ENODEV: device got disconnected */ 500 if (err != -EPERM && err != -ENODEV) 501 BT_ERR("%s urb %p failed to resubmit (%d)", 502 hdev->name, urb, -err); 503 usb_unanchor_urb(urb); 504 } 505 } 506 507 static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu) 508 { 509 int i, offset = 0; 510 511 BT_DBG("len %d mtu %d", len, mtu); 512 513 for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu; 514 i++, offset += mtu, len -= mtu) { 515 urb->iso_frame_desc[i].offset = offset; 516 urb->iso_frame_desc[i].length = mtu; 517 } 518 519 if (len && i < BTUSB_MAX_ISOC_FRAMES) { 520 urb->iso_frame_desc[i].offset = offset; 521 urb->iso_frame_desc[i].length = len; 522 i++; 523 } 524 525 urb->number_of_packets = i; 526 } 527 528 static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags) 529 { 530 struct btusb_data *data = hci_get_drvdata(hdev); 531 struct urb *urb; 532 unsigned char *buf; 533 unsigned int pipe; 534 int err, size; 535 536 BT_DBG("%s", hdev->name); 537 538 if (!data->isoc_rx_ep) 539 return -ENODEV; 540 541 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags); 542 if (!urb) 543 return -ENOMEM; 544 545 size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) * 546 BTUSB_MAX_ISOC_FRAMES; 547 548 buf = kmalloc(size, mem_flags); 549 if (!buf) { 550 usb_free_urb(urb); 551 return -ENOMEM; 552 } 553 554 pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress); 555 556 usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete, 557 hdev, data->isoc_rx_ep->bInterval); 558 559 urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP; 560 561 __fill_isoc_descriptor(urb, size, 562 le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize)); 563 564 usb_anchor_urb(urb, &data->isoc_anchor); 565 566 err = usb_submit_urb(urb, mem_flags); 567 if (err < 0) { 568 if (err != -EPERM && err != -ENODEV) 569 BT_ERR("%s urb %p submission failed (%d)", 570 hdev->name, urb, -err); 571 usb_unanchor_urb(urb); 572 } 573 574 usb_free_urb(urb); 575 576 return err; 577 } 578 579 static void btusb_tx_complete(struct urb *urb) 580 { 581 struct sk_buff *skb = urb->context; 582 struct hci_dev *hdev = (struct hci_dev *) skb->dev; 583 struct btusb_data *data = hci_get_drvdata(hdev); 584 585 BT_DBG("%s urb %p status %d count %d", hdev->name, 586 urb, urb->status, urb->actual_length); 587 588 if (!test_bit(HCI_RUNNING, &hdev->flags)) 589 goto done; 590 591 if (!urb->status) 592 hdev->stat.byte_tx += urb->transfer_buffer_length; 593 else 594 hdev->stat.err_tx++; 595 596 done: 597 spin_lock(&data->txlock); 598 data->tx_in_flight--; 599 spin_unlock(&data->txlock); 600 601 kfree(urb->setup_packet); 602 603 kfree_skb(skb); 604 } 605 606 static void btusb_isoc_tx_complete(struct urb *urb) 607 { 608 struct sk_buff *skb = urb->context; 609 struct hci_dev *hdev = (struct hci_dev *) skb->dev; 610 611 BT_DBG("%s urb %p status %d count %d", hdev->name, 612 urb, urb->status, urb->actual_length); 613 614 if (!test_bit(HCI_RUNNING, &hdev->flags)) 615 goto done; 616 617 if (!urb->status) 618 hdev->stat.byte_tx += urb->transfer_buffer_length; 619 else 620 hdev->stat.err_tx++; 621 622 done: 623 kfree(urb->setup_packet); 624 625 kfree_skb(skb); 626 } 627 628 static int btusb_open(struct hci_dev *hdev) 629 { 630 struct btusb_data *data = hci_get_drvdata(hdev); 631 int err; 632 633 BT_DBG("%s", hdev->name); 634 635 err = usb_autopm_get_interface(data->intf); 636 if (err < 0) 637 return err; 638 639 data->intf->needs_remote_wakeup = 1; 640 641 if (test_and_set_bit(HCI_RUNNING, &hdev->flags)) 642 goto done; 643 644 if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags)) 645 goto done; 646 647 err = btusb_submit_intr_urb(hdev, GFP_KERNEL); 648 if (err < 0) 649 goto failed; 650 651 err = btusb_submit_bulk_urb(hdev, GFP_KERNEL); 652 if (err < 0) { 653 usb_kill_anchored_urbs(&data->intr_anchor); 654 goto failed; 655 } 656 657 set_bit(BTUSB_BULK_RUNNING, &data->flags); 658 btusb_submit_bulk_urb(hdev, GFP_KERNEL); 659 660 done: 661 usb_autopm_put_interface(data->intf); 662 return 0; 663 664 failed: 665 clear_bit(BTUSB_INTR_RUNNING, &data->flags); 666 clear_bit(HCI_RUNNING, &hdev->flags); 667 usb_autopm_put_interface(data->intf); 668 return err; 669 } 670 671 static void btusb_stop_traffic(struct btusb_data *data) 672 { 673 usb_kill_anchored_urbs(&data->intr_anchor); 674 usb_kill_anchored_urbs(&data->bulk_anchor); 675 usb_kill_anchored_urbs(&data->isoc_anchor); 676 } 677 678 static int btusb_close(struct hci_dev *hdev) 679 { 680 struct btusb_data *data = hci_get_drvdata(hdev); 681 int err; 682 683 BT_DBG("%s", hdev->name); 684 685 if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) 686 return 0; 687 688 cancel_work_sync(&data->work); 689 cancel_work_sync(&data->waker); 690 691 clear_bit(BTUSB_ISOC_RUNNING, &data->flags); 692 clear_bit(BTUSB_BULK_RUNNING, &data->flags); 693 clear_bit(BTUSB_INTR_RUNNING, &data->flags); 694 695 btusb_stop_traffic(data); 696 err = usb_autopm_get_interface(data->intf); 697 if (err < 0) 698 goto failed; 699 700 data->intf->needs_remote_wakeup = 0; 701 usb_autopm_put_interface(data->intf); 702 703 failed: 704 usb_scuttle_anchored_urbs(&data->deferred); 705 return 0; 706 } 707 708 static int btusb_flush(struct hci_dev *hdev) 709 { 710 struct btusb_data *data = hci_get_drvdata(hdev); 711 712 BT_DBG("%s", hdev->name); 713 714 usb_kill_anchored_urbs(&data->tx_anchor); 715 716 return 0; 717 } 718 719 static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb) 720 { 721 struct btusb_data *data = hci_get_drvdata(hdev); 722 struct usb_ctrlrequest *dr; 723 struct urb *urb; 724 unsigned int pipe; 725 int err; 726 727 BT_DBG("%s", hdev->name); 728 729 if (!test_bit(HCI_RUNNING, &hdev->flags)) 730 return -EBUSY; 731 732 skb->dev = (void *) hdev; 733 734 switch (bt_cb(skb)->pkt_type) { 735 case HCI_COMMAND_PKT: 736 urb = usb_alloc_urb(0, GFP_ATOMIC); 737 if (!urb) 738 return -ENOMEM; 739 740 dr = kmalloc(sizeof(*dr), GFP_ATOMIC); 741 if (!dr) { 742 usb_free_urb(urb); 743 return -ENOMEM; 744 } 745 746 dr->bRequestType = data->cmdreq_type; 747 dr->bRequest = 0; 748 dr->wIndex = 0; 749 dr->wValue = 0; 750 dr->wLength = __cpu_to_le16(skb->len); 751 752 pipe = usb_sndctrlpipe(data->udev, 0x00); 753 754 usb_fill_control_urb(urb, data->udev, pipe, (void *) dr, 755 skb->data, skb->len, btusb_tx_complete, skb); 756 757 hdev->stat.cmd_tx++; 758 break; 759 760 case HCI_ACLDATA_PKT: 761 if (!data->bulk_tx_ep) 762 return -ENODEV; 763 764 urb = usb_alloc_urb(0, GFP_ATOMIC); 765 if (!urb) 766 return -ENOMEM; 767 768 pipe = usb_sndbulkpipe(data->udev, 769 data->bulk_tx_ep->bEndpointAddress); 770 771 usb_fill_bulk_urb(urb, data->udev, pipe, 772 skb->data, skb->len, btusb_tx_complete, skb); 773 774 hdev->stat.acl_tx++; 775 break; 776 777 case HCI_SCODATA_PKT: 778 if (!data->isoc_tx_ep || hci_conn_num(hdev, SCO_LINK) < 1) 779 return -ENODEV; 780 781 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC); 782 if (!urb) 783 return -ENOMEM; 784 785 pipe = usb_sndisocpipe(data->udev, 786 data->isoc_tx_ep->bEndpointAddress); 787 788 usb_fill_int_urb(urb, data->udev, pipe, 789 skb->data, skb->len, btusb_isoc_tx_complete, 790 skb, data->isoc_tx_ep->bInterval); 791 792 urb->transfer_flags = URB_ISO_ASAP; 793 794 __fill_isoc_descriptor(urb, skb->len, 795 le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize)); 796 797 hdev->stat.sco_tx++; 798 goto skip_waking; 799 800 default: 801 return -EILSEQ; 802 } 803 804 err = inc_tx(data); 805 if (err) { 806 usb_anchor_urb(urb, &data->deferred); 807 schedule_work(&data->waker); 808 err = 0; 809 goto done; 810 } 811 812 skip_waking: 813 usb_anchor_urb(urb, &data->tx_anchor); 814 815 err = usb_submit_urb(urb, GFP_ATOMIC); 816 if (err < 0) { 817 if (err != -EPERM && err != -ENODEV) 818 BT_ERR("%s urb %p submission failed (%d)", 819 hdev->name, urb, -err); 820 kfree(urb->setup_packet); 821 usb_unanchor_urb(urb); 822 } else { 823 usb_mark_last_busy(data->udev); 824 } 825 826 done: 827 usb_free_urb(urb); 828 return err; 829 } 830 831 static void btusb_notify(struct hci_dev *hdev, unsigned int evt) 832 { 833 struct btusb_data *data = hci_get_drvdata(hdev); 834 835 BT_DBG("%s evt %d", hdev->name, evt); 836 837 if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) { 838 data->sco_num = hci_conn_num(hdev, SCO_LINK); 839 schedule_work(&data->work); 840 } 841 } 842 843 static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting) 844 { 845 struct btusb_data *data = hci_get_drvdata(hdev); 846 struct usb_interface *intf = data->isoc; 847 struct usb_endpoint_descriptor *ep_desc; 848 int i, err; 849 850 if (!data->isoc) 851 return -ENODEV; 852 853 err = usb_set_interface(data->udev, 1, altsetting); 854 if (err < 0) { 855 BT_ERR("%s setting interface failed (%d)", hdev->name, -err); 856 return err; 857 } 858 859 data->isoc_altsetting = altsetting; 860 861 data->isoc_tx_ep = NULL; 862 data->isoc_rx_ep = NULL; 863 864 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { 865 ep_desc = &intf->cur_altsetting->endpoint[i].desc; 866 867 if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) { 868 data->isoc_tx_ep = ep_desc; 869 continue; 870 } 871 872 if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) { 873 data->isoc_rx_ep = ep_desc; 874 continue; 875 } 876 } 877 878 if (!data->isoc_tx_ep || !data->isoc_rx_ep) { 879 BT_ERR("%s invalid SCO descriptors", hdev->name); 880 return -ENODEV; 881 } 882 883 return 0; 884 } 885 886 static void btusb_work(struct work_struct *work) 887 { 888 struct btusb_data *data = container_of(work, struct btusb_data, work); 889 struct hci_dev *hdev = data->hdev; 890 int new_alts; 891 int err; 892 893 if (data->sco_num > 0) { 894 if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) { 895 err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf); 896 if (err < 0) { 897 clear_bit(BTUSB_ISOC_RUNNING, &data->flags); 898 usb_kill_anchored_urbs(&data->isoc_anchor); 899 return; 900 } 901 902 set_bit(BTUSB_DID_ISO_RESUME, &data->flags); 903 } 904 905 if (hdev->voice_setting & 0x0020) { 906 static const int alts[3] = { 2, 4, 5 }; 907 new_alts = alts[data->sco_num - 1]; 908 } else { 909 new_alts = data->sco_num; 910 } 911 912 if (data->isoc_altsetting != new_alts) { 913 clear_bit(BTUSB_ISOC_RUNNING, &data->flags); 914 usb_kill_anchored_urbs(&data->isoc_anchor); 915 916 if (__set_isoc_interface(hdev, new_alts) < 0) 917 return; 918 } 919 920 if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) { 921 if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0) 922 clear_bit(BTUSB_ISOC_RUNNING, &data->flags); 923 else 924 btusb_submit_isoc_urb(hdev, GFP_KERNEL); 925 } 926 } else { 927 clear_bit(BTUSB_ISOC_RUNNING, &data->flags); 928 usb_kill_anchored_urbs(&data->isoc_anchor); 929 930 __set_isoc_interface(hdev, 0); 931 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags)) 932 usb_autopm_put_interface(data->isoc ? data->isoc : data->intf); 933 } 934 } 935 936 static void btusb_waker(struct work_struct *work) 937 { 938 struct btusb_data *data = container_of(work, struct btusb_data, waker); 939 int err; 940 941 err = usb_autopm_get_interface(data->intf); 942 if (err < 0) 943 return; 944 945 usb_autopm_put_interface(data->intf); 946 } 947 948 static int btusb_setup_bcm92035(struct hci_dev *hdev) 949 { 950 struct sk_buff *skb; 951 u8 val = 0x00; 952 953 BT_DBG("%s", hdev->name); 954 955 skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT); 956 if (IS_ERR(skb)) 957 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb)); 958 else 959 kfree_skb(skb); 960 961 return 0; 962 } 963 964 struct intel_version { 965 u8 status; 966 u8 hw_platform; 967 u8 hw_variant; 968 u8 hw_revision; 969 u8 fw_variant; 970 u8 fw_revision; 971 u8 fw_build_num; 972 u8 fw_build_ww; 973 u8 fw_build_yy; 974 u8 fw_patch_num; 975 } __packed; 976 977 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev, 978 struct intel_version *ver) 979 { 980 const struct firmware *fw; 981 char fwname[64]; 982 int ret; 983 984 snprintf(fwname, sizeof(fwname), 985 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq", 986 ver->hw_platform, ver->hw_variant, ver->hw_revision, 987 ver->fw_variant, ver->fw_revision, ver->fw_build_num, 988 ver->fw_build_ww, ver->fw_build_yy); 989 990 ret = request_firmware(&fw, fwname, &hdev->dev); 991 if (ret < 0) { 992 if (ret == -EINVAL) { 993 BT_ERR("%s Intel firmware file request failed (%d)", 994 hdev->name, ret); 995 return NULL; 996 } 997 998 BT_ERR("%s failed to open Intel firmware file: %s(%d)", 999 hdev->name, fwname, ret); 1000 1001 /* If the correct firmware patch file is not found, use the 1002 * default firmware patch file instead 1003 */ 1004 snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq", 1005 ver->hw_platform, ver->hw_variant); 1006 if (request_firmware(&fw, fwname, &hdev->dev) < 0) { 1007 BT_ERR("%s failed to open default Intel fw file: %s", 1008 hdev->name, fwname); 1009 return NULL; 1010 } 1011 } 1012 1013 BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname); 1014 1015 return fw; 1016 } 1017 1018 static int btusb_setup_intel_patching(struct hci_dev *hdev, 1019 const struct firmware *fw, 1020 const u8 **fw_ptr, int *disable_patch) 1021 { 1022 struct sk_buff *skb; 1023 struct hci_command_hdr *cmd; 1024 const u8 *cmd_param; 1025 struct hci_event_hdr *evt = NULL; 1026 const u8 *evt_param = NULL; 1027 int remain = fw->size - (*fw_ptr - fw->data); 1028 1029 /* The first byte indicates the types of the patch command or event. 1030 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes 1031 * in the current firmware buffer doesn't start with 0x01 or 1032 * the size of remain buffer is smaller than HCI command header, 1033 * the firmware file is corrupted and it should stop the patching 1034 * process. 1035 */ 1036 if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) { 1037 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name); 1038 return -EINVAL; 1039 } 1040 (*fw_ptr)++; 1041 remain--; 1042 1043 cmd = (struct hci_command_hdr *)(*fw_ptr); 1044 *fw_ptr += sizeof(*cmd); 1045 remain -= sizeof(*cmd); 1046 1047 /* Ensure that the remain firmware data is long enough than the length 1048 * of command parameter. If not, the firmware file is corrupted. 1049 */ 1050 if (remain < cmd->plen) { 1051 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name); 1052 return -EFAULT; 1053 } 1054 1055 /* If there is a command that loads a patch in the firmware 1056 * file, then enable the patch upon success, otherwise just 1057 * disable the manufacturer mode, for example patch activation 1058 * is not required when the default firmware patch file is used 1059 * because there are no patch data to load. 1060 */ 1061 if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e) 1062 *disable_patch = 0; 1063 1064 cmd_param = *fw_ptr; 1065 *fw_ptr += cmd->plen; 1066 remain -= cmd->plen; 1067 1068 /* This reads the expected events when the above command is sent to the 1069 * device. Some vendor commands expects more than one events, for 1070 * example command status event followed by vendor specific event. 1071 * For this case, it only keeps the last expected event. so the command 1072 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of 1073 * last expected event. 1074 */ 1075 while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) { 1076 (*fw_ptr)++; 1077 remain--; 1078 1079 evt = (struct hci_event_hdr *)(*fw_ptr); 1080 *fw_ptr += sizeof(*evt); 1081 remain -= sizeof(*evt); 1082 1083 if (remain < evt->plen) { 1084 BT_ERR("%s Intel fw corrupted: invalid evt len", 1085 hdev->name); 1086 return -EFAULT; 1087 } 1088 1089 evt_param = *fw_ptr; 1090 *fw_ptr += evt->plen; 1091 remain -= evt->plen; 1092 } 1093 1094 /* Every HCI commands in the firmware file has its correspond event. 1095 * If event is not found or remain is smaller than zero, the firmware 1096 * file is corrupted. 1097 */ 1098 if (!evt || !evt_param || remain < 0) { 1099 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name); 1100 return -EFAULT; 1101 } 1102 1103 skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen, 1104 cmd_param, evt->evt, HCI_INIT_TIMEOUT); 1105 if (IS_ERR(skb)) { 1106 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)", 1107 hdev->name, cmd->opcode, PTR_ERR(skb)); 1108 return PTR_ERR(skb); 1109 } 1110 1111 /* It ensures that the returned event matches the event data read from 1112 * the firmware file. At fist, it checks the length and then 1113 * the contents of the event. 1114 */ 1115 if (skb->len != evt->plen) { 1116 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name, 1117 le16_to_cpu(cmd->opcode)); 1118 kfree_skb(skb); 1119 return -EFAULT; 1120 } 1121 1122 if (memcmp(skb->data, evt_param, evt->plen)) { 1123 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)", 1124 hdev->name, le16_to_cpu(cmd->opcode)); 1125 kfree_skb(skb); 1126 return -EFAULT; 1127 } 1128 kfree_skb(skb); 1129 1130 return 0; 1131 } 1132 1133 static int btusb_setup_intel(struct hci_dev *hdev) 1134 { 1135 struct sk_buff *skb; 1136 const struct firmware *fw; 1137 const u8 *fw_ptr; 1138 int disable_patch; 1139 struct intel_version *ver; 1140 1141 const u8 mfg_enable[] = { 0x01, 0x00 }; 1142 const u8 mfg_disable[] = { 0x00, 0x00 }; 1143 const u8 mfg_reset_deactivate[] = { 0x00, 0x01 }; 1144 const u8 mfg_reset_activate[] = { 0x00, 0x02 }; 1145 1146 BT_DBG("%s", hdev->name); 1147 1148 /* The controller has a bug with the first HCI command sent to it 1149 * returning number of completed commands as zero. This would stall the 1150 * command processing in the Bluetooth core. 1151 * 1152 * As a workaround, send HCI Reset command first which will reset the 1153 * number of completed commands and allow normal command processing 1154 * from now on. 1155 */ 1156 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); 1157 if (IS_ERR(skb)) { 1158 BT_ERR("%s sending initial HCI reset command failed (%ld)", 1159 hdev->name, PTR_ERR(skb)); 1160 return PTR_ERR(skb); 1161 } 1162 kfree_skb(skb); 1163 1164 /* Read Intel specific controller version first to allow selection of 1165 * which firmware file to load. 1166 * 1167 * The returned information are hardware variant and revision plus 1168 * firmware variant, revision and build number. 1169 */ 1170 skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT); 1171 if (IS_ERR(skb)) { 1172 BT_ERR("%s reading Intel fw version command failed (%ld)", 1173 hdev->name, PTR_ERR(skb)); 1174 return PTR_ERR(skb); 1175 } 1176 1177 if (skb->len != sizeof(*ver)) { 1178 BT_ERR("%s Intel version event length mismatch", hdev->name); 1179 kfree_skb(skb); 1180 return -EIO; 1181 } 1182 1183 ver = (struct intel_version *)skb->data; 1184 if (ver->status) { 1185 BT_ERR("%s Intel fw version event failed (%02x)", hdev->name, 1186 ver->status); 1187 kfree_skb(skb); 1188 return -bt_to_errno(ver->status); 1189 } 1190 1191 BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x", 1192 hdev->name, ver->hw_platform, ver->hw_variant, 1193 ver->hw_revision, ver->fw_variant, ver->fw_revision, 1194 ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy, 1195 ver->fw_patch_num); 1196 1197 /* fw_patch_num indicates the version of patch the device currently 1198 * have. If there is no patch data in the device, it is always 0x00. 1199 * So, if it is other than 0x00, no need to patch the deivce again. 1200 */ 1201 if (ver->fw_patch_num) { 1202 BT_INFO("%s: Intel device is already patched. patch num: %02x", 1203 hdev->name, ver->fw_patch_num); 1204 kfree_skb(skb); 1205 return 0; 1206 } 1207 1208 /* Opens the firmware patch file based on the firmware version read 1209 * from the controller. If it fails to open the matching firmware 1210 * patch file, it tries to open the default firmware patch file. 1211 * If no patch file is found, allow the device to operate without 1212 * a patch. 1213 */ 1214 fw = btusb_setup_intel_get_fw(hdev, ver); 1215 if (!fw) { 1216 kfree_skb(skb); 1217 return 0; 1218 } 1219 fw_ptr = fw->data; 1220 1221 /* This Intel specific command enables the manufacturer mode of the 1222 * controller. 1223 * 1224 * Only while this mode is enabled, the driver can download the 1225 * firmware patch data and configuration parameters. 1226 */ 1227 skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT); 1228 if (IS_ERR(skb)) { 1229 BT_ERR("%s entering Intel manufacturer mode failed (%ld)", 1230 hdev->name, PTR_ERR(skb)); 1231 release_firmware(fw); 1232 return PTR_ERR(skb); 1233 } 1234 1235 if (skb->data[0]) { 1236 u8 evt_status = skb->data[0]; 1237 BT_ERR("%s enable Intel manufacturer mode event failed (%02x)", 1238 hdev->name, evt_status); 1239 kfree_skb(skb); 1240 release_firmware(fw); 1241 return -bt_to_errno(evt_status); 1242 } 1243 kfree_skb(skb); 1244 1245 disable_patch = 1; 1246 1247 /* The firmware data file consists of list of Intel specific HCI 1248 * commands and its expected events. The first byte indicates the 1249 * type of the message, either HCI command or HCI event. 1250 * 1251 * It reads the command and its expected event from the firmware file, 1252 * and send to the controller. Once __hci_cmd_sync_ev() returns, 1253 * the returned event is compared with the event read from the firmware 1254 * file and it will continue until all the messages are downloaded to 1255 * the controller. 1256 * 1257 * Once the firmware patching is completed successfully, 1258 * the manufacturer mode is disabled with reset and activating the 1259 * downloaded patch. 1260 * 1261 * If the firmware patching fails, the manufacturer mode is 1262 * disabled with reset and deactivating the patch. 1263 * 1264 * If the default patch file is used, no reset is done when disabling 1265 * the manufacturer. 1266 */ 1267 while (fw->size > fw_ptr - fw->data) { 1268 int ret; 1269 1270 ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr, 1271 &disable_patch); 1272 if (ret < 0) 1273 goto exit_mfg_deactivate; 1274 } 1275 1276 release_firmware(fw); 1277 1278 if (disable_patch) 1279 goto exit_mfg_disable; 1280 1281 /* Patching completed successfully and disable the manufacturer mode 1282 * with reset and activate the downloaded firmware patches. 1283 */ 1284 skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate), 1285 mfg_reset_activate, HCI_INIT_TIMEOUT); 1286 if (IS_ERR(skb)) { 1287 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", 1288 hdev->name, PTR_ERR(skb)); 1289 return PTR_ERR(skb); 1290 } 1291 kfree_skb(skb); 1292 1293 BT_INFO("%s: Intel Bluetooth firmware patch completed and activated", 1294 hdev->name); 1295 1296 return 0; 1297 1298 exit_mfg_disable: 1299 /* Disable the manufacturer mode without reset */ 1300 skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable, 1301 HCI_INIT_TIMEOUT); 1302 if (IS_ERR(skb)) { 1303 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", 1304 hdev->name, PTR_ERR(skb)); 1305 return PTR_ERR(skb); 1306 } 1307 kfree_skb(skb); 1308 1309 BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name); 1310 return 0; 1311 1312 exit_mfg_deactivate: 1313 release_firmware(fw); 1314 1315 /* Patching failed. Disable the manufacturer mode with reset and 1316 * deactivate the downloaded firmware patches. 1317 */ 1318 skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate), 1319 mfg_reset_deactivate, HCI_INIT_TIMEOUT); 1320 if (IS_ERR(skb)) { 1321 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", 1322 hdev->name, PTR_ERR(skb)); 1323 return PTR_ERR(skb); 1324 } 1325 kfree_skb(skb); 1326 1327 BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated", 1328 hdev->name); 1329 1330 return 0; 1331 } 1332 1333 static int btusb_probe(struct usb_interface *intf, 1334 const struct usb_device_id *id) 1335 { 1336 struct usb_endpoint_descriptor *ep_desc; 1337 struct btusb_data *data; 1338 struct hci_dev *hdev; 1339 int i, err; 1340 1341 BT_DBG("intf %p id %p", intf, id); 1342 1343 /* interface numbers are hardcoded in the spec */ 1344 if (intf->cur_altsetting->desc.bInterfaceNumber != 0) 1345 return -ENODEV; 1346 1347 if (!id->driver_info) { 1348 const struct usb_device_id *match; 1349 match = usb_match_id(intf, blacklist_table); 1350 if (match) 1351 id = match; 1352 } 1353 1354 if (id->driver_info == BTUSB_IGNORE) 1355 return -ENODEV; 1356 1357 if (ignore_dga && id->driver_info & BTUSB_DIGIANSWER) 1358 return -ENODEV; 1359 1360 if (ignore_csr && id->driver_info & BTUSB_CSR) 1361 return -ENODEV; 1362 1363 if (ignore_sniffer && id->driver_info & BTUSB_SNIFFER) 1364 return -ENODEV; 1365 1366 if (id->driver_info & BTUSB_ATH3012) { 1367 struct usb_device *udev = interface_to_usbdev(intf); 1368 1369 /* Old firmware would otherwise let ath3k driver load 1370 * patch and sysconfig files */ 1371 if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001) 1372 return -ENODEV; 1373 } 1374 1375 data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL); 1376 if (!data) 1377 return -ENOMEM; 1378 1379 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { 1380 ep_desc = &intf->cur_altsetting->endpoint[i].desc; 1381 1382 if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) { 1383 data->intr_ep = ep_desc; 1384 continue; 1385 } 1386 1387 if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) { 1388 data->bulk_tx_ep = ep_desc; 1389 continue; 1390 } 1391 1392 if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) { 1393 data->bulk_rx_ep = ep_desc; 1394 continue; 1395 } 1396 } 1397 1398 if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep) 1399 return -ENODEV; 1400 1401 data->cmdreq_type = USB_TYPE_CLASS; 1402 1403 data->udev = interface_to_usbdev(intf); 1404 data->intf = intf; 1405 1406 spin_lock_init(&data->lock); 1407 1408 INIT_WORK(&data->work, btusb_work); 1409 INIT_WORK(&data->waker, btusb_waker); 1410 spin_lock_init(&data->txlock); 1411 1412 init_usb_anchor(&data->tx_anchor); 1413 init_usb_anchor(&data->intr_anchor); 1414 init_usb_anchor(&data->bulk_anchor); 1415 init_usb_anchor(&data->isoc_anchor); 1416 init_usb_anchor(&data->deferred); 1417 1418 hdev = hci_alloc_dev(); 1419 if (!hdev) 1420 return -ENOMEM; 1421 1422 hdev->bus = HCI_USB; 1423 hci_set_drvdata(hdev, data); 1424 1425 data->hdev = hdev; 1426 1427 SET_HCIDEV_DEV(hdev, &intf->dev); 1428 1429 hdev->open = btusb_open; 1430 hdev->close = btusb_close; 1431 hdev->flush = btusb_flush; 1432 hdev->send = btusb_send_frame; 1433 hdev->notify = btusb_notify; 1434 1435 if (id->driver_info & BTUSB_BCM92035) 1436 hdev->setup = btusb_setup_bcm92035; 1437 1438 if (id->driver_info & BTUSB_INTEL) 1439 hdev->setup = btusb_setup_intel; 1440 1441 /* Interface numbers are hardcoded in the specification */ 1442 data->isoc = usb_ifnum_to_if(data->udev, 1); 1443 1444 if (!reset) 1445 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); 1446 1447 if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) { 1448 if (!disable_scofix) 1449 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks); 1450 } 1451 1452 if (id->driver_info & BTUSB_BROKEN_ISOC) 1453 data->isoc = NULL; 1454 1455 if (id->driver_info & BTUSB_DIGIANSWER) { 1456 data->cmdreq_type = USB_TYPE_VENDOR; 1457 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); 1458 } 1459 1460 if (id->driver_info & BTUSB_CSR) { 1461 struct usb_device *udev = data->udev; 1462 1463 /* Old firmware would otherwise execute USB reset */ 1464 if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x117) 1465 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); 1466 } 1467 1468 if (id->driver_info & BTUSB_SNIFFER) { 1469 struct usb_device *udev = data->udev; 1470 1471 /* New sniffer firmware has crippled HCI interface */ 1472 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997) 1473 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); 1474 1475 data->isoc = NULL; 1476 } 1477 1478 if (data->isoc) { 1479 err = usb_driver_claim_interface(&btusb_driver, 1480 data->isoc, data); 1481 if (err < 0) { 1482 hci_free_dev(hdev); 1483 return err; 1484 } 1485 } 1486 1487 err = hci_register_dev(hdev); 1488 if (err < 0) { 1489 hci_free_dev(hdev); 1490 return err; 1491 } 1492 1493 usb_set_intfdata(intf, data); 1494 1495 return 0; 1496 } 1497 1498 static void btusb_disconnect(struct usb_interface *intf) 1499 { 1500 struct btusb_data *data = usb_get_intfdata(intf); 1501 struct hci_dev *hdev; 1502 1503 BT_DBG("intf %p", intf); 1504 1505 if (!data) 1506 return; 1507 1508 hdev = data->hdev; 1509 usb_set_intfdata(data->intf, NULL); 1510 1511 if (data->isoc) 1512 usb_set_intfdata(data->isoc, NULL); 1513 1514 hci_unregister_dev(hdev); 1515 1516 if (intf == data->isoc) 1517 usb_driver_release_interface(&btusb_driver, data->intf); 1518 else if (data->isoc) 1519 usb_driver_release_interface(&btusb_driver, data->isoc); 1520 1521 hci_free_dev(hdev); 1522 } 1523 1524 #ifdef CONFIG_PM 1525 static int btusb_suspend(struct usb_interface *intf, pm_message_t message) 1526 { 1527 struct btusb_data *data = usb_get_intfdata(intf); 1528 1529 BT_DBG("intf %p", intf); 1530 1531 if (data->suspend_count++) 1532 return 0; 1533 1534 spin_lock_irq(&data->txlock); 1535 if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) { 1536 set_bit(BTUSB_SUSPENDING, &data->flags); 1537 spin_unlock_irq(&data->txlock); 1538 } else { 1539 spin_unlock_irq(&data->txlock); 1540 data->suspend_count--; 1541 return -EBUSY; 1542 } 1543 1544 cancel_work_sync(&data->work); 1545 1546 btusb_stop_traffic(data); 1547 usb_kill_anchored_urbs(&data->tx_anchor); 1548 1549 return 0; 1550 } 1551 1552 static void play_deferred(struct btusb_data *data) 1553 { 1554 struct urb *urb; 1555 int err; 1556 1557 while ((urb = usb_get_from_anchor(&data->deferred))) { 1558 err = usb_submit_urb(urb, GFP_ATOMIC); 1559 if (err < 0) 1560 break; 1561 1562 data->tx_in_flight++; 1563 } 1564 usb_scuttle_anchored_urbs(&data->deferred); 1565 } 1566 1567 static int btusb_resume(struct usb_interface *intf) 1568 { 1569 struct btusb_data *data = usb_get_intfdata(intf); 1570 struct hci_dev *hdev = data->hdev; 1571 int err = 0; 1572 1573 BT_DBG("intf %p", intf); 1574 1575 if (--data->suspend_count) 1576 return 0; 1577 1578 if (!test_bit(HCI_RUNNING, &hdev->flags)) 1579 goto done; 1580 1581 if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) { 1582 err = btusb_submit_intr_urb(hdev, GFP_NOIO); 1583 if (err < 0) { 1584 clear_bit(BTUSB_INTR_RUNNING, &data->flags); 1585 goto failed; 1586 } 1587 } 1588 1589 if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) { 1590 err = btusb_submit_bulk_urb(hdev, GFP_NOIO); 1591 if (err < 0) { 1592 clear_bit(BTUSB_BULK_RUNNING, &data->flags); 1593 goto failed; 1594 } 1595 1596 btusb_submit_bulk_urb(hdev, GFP_NOIO); 1597 } 1598 1599 if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) { 1600 if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0) 1601 clear_bit(BTUSB_ISOC_RUNNING, &data->flags); 1602 else 1603 btusb_submit_isoc_urb(hdev, GFP_NOIO); 1604 } 1605 1606 spin_lock_irq(&data->txlock); 1607 play_deferred(data); 1608 clear_bit(BTUSB_SUSPENDING, &data->flags); 1609 spin_unlock_irq(&data->txlock); 1610 schedule_work(&data->work); 1611 1612 return 0; 1613 1614 failed: 1615 usb_scuttle_anchored_urbs(&data->deferred); 1616 done: 1617 spin_lock_irq(&data->txlock); 1618 clear_bit(BTUSB_SUSPENDING, &data->flags); 1619 spin_unlock_irq(&data->txlock); 1620 1621 return err; 1622 } 1623 #endif 1624 1625 static struct usb_driver btusb_driver = { 1626 .name = "btusb", 1627 .probe = btusb_probe, 1628 .disconnect = btusb_disconnect, 1629 #ifdef CONFIG_PM 1630 .suspend = btusb_suspend, 1631 .resume = btusb_resume, 1632 #endif 1633 .id_table = btusb_table, 1634 .supports_autosuspend = 1, 1635 .disable_hub_initiated_lpm = 1, 1636 }; 1637 1638 module_usb_driver(btusb_driver); 1639 1640 module_param(ignore_dga, bool, 0644); 1641 MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001"); 1642 1643 module_param(ignore_csr, bool, 0644); 1644 MODULE_PARM_DESC(ignore_csr, "Ignore devices with id 0a12:0001"); 1645 1646 module_param(ignore_sniffer, bool, 0644); 1647 MODULE_PARM_DESC(ignore_sniffer, "Ignore devices with id 0a12:0002"); 1648 1649 module_param(disable_scofix, bool, 0644); 1650 MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size"); 1651 1652 module_param(force_scofix, bool, 0644); 1653 MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size"); 1654 1655 module_param(reset, bool, 0644); 1656 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization"); 1657 1658 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); 1659 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION); 1660 MODULE_VERSION(VERSION); 1661 MODULE_LICENSE("GPL"); 1662