xref: /linux/drivers/bluetooth/bluecard_cs.c (revision 20d0021394c1b070bf04b22c5bc8fdb437edd4c5)
1 /*
2  *
3  *  Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)
4  *
5  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
6  *
7  *
8  *  This program is free software; you can redistribute it and/or modify
9  *  it under the terms of the GNU General Public License version 2 as
10  *  published by the Free Software Foundation;
11  *
12  *  Software distributed under the License is distributed on an "AS
13  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14  *  implied. See the License for the specific language governing
15  *  rights and limitations under the License.
16  *
17  *  The initial developer of the original code is David A. Hinds
18  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
19  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
20  *
21  */
22 
23 #include <linux/config.h>
24 #include <linux/module.h>
25 
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/slab.h>
29 #include <linux/types.h>
30 #include <linux/sched.h>
31 #include <linux/delay.h>
32 #include <linux/timer.h>
33 #include <linux/errno.h>
34 #include <linux/ptrace.h>
35 #include <linux/ioport.h>
36 #include <linux/spinlock.h>
37 #include <linux/moduleparam.h>
38 #include <linux/wait.h>
39 
40 #include <linux/skbuff.h>
41 #include <asm/io.h>
42 
43 #include <pcmcia/cs_types.h>
44 #include <pcmcia/cs.h>
45 #include <pcmcia/cistpl.h>
46 #include <pcmcia/ciscode.h>
47 #include <pcmcia/ds.h>
48 #include <pcmcia/cisreg.h>
49 
50 #include <net/bluetooth/bluetooth.h>
51 #include <net/bluetooth/hci_core.h>
52 
53 
54 
55 /* ======================== Module parameters ======================== */
56 
57 
58 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
59 MODULE_DESCRIPTION("Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)");
60 MODULE_LICENSE("GPL");
61 
62 
63 
64 /* ======================== Local structures ======================== */
65 
66 
67 typedef struct bluecard_info_t {
68 	dev_link_t link;
69 	dev_node_t node;
70 
71 	struct hci_dev *hdev;
72 
73 	spinlock_t lock;		/* For serializing operations */
74 	struct timer_list timer;	/* For LED control */
75 
76 	struct sk_buff_head txq;
77 	unsigned long tx_state;
78 
79 	unsigned long rx_state;
80 	unsigned long rx_count;
81 	struct sk_buff *rx_skb;
82 
83 	unsigned char ctrl_reg;
84 	unsigned long hw_state;		/* Status of the hardware and LED control */
85 } bluecard_info_t;
86 
87 
88 static void bluecard_config(dev_link_t *link);
89 static void bluecard_release(dev_link_t *link);
90 static int bluecard_event(event_t event, int priority, event_callback_args_t *args);
91 
92 static dev_info_t dev_info = "bluecard_cs";
93 
94 static dev_link_t *bluecard_attach(void);
95 static void bluecard_detach(dev_link_t *);
96 
97 static dev_link_t *dev_list = NULL;
98 
99 
100 /* Default baud rate: 57600, 115200, 230400 or 460800 */
101 #define DEFAULT_BAUD_RATE  230400
102 
103 
104 /* Hardware states */
105 #define CARD_READY             1
106 #define CARD_HAS_PCCARD_ID     4
107 #define CARD_HAS_POWER_LED     5
108 #define CARD_HAS_ACTIVITY_LED  6
109 
110 /* Transmit states  */
111 #define XMIT_SENDING         1
112 #define XMIT_WAKEUP          2
113 #define XMIT_BUFFER_NUMBER   5	/* unset = buffer one, set = buffer two */
114 #define XMIT_BUF_ONE_READY   6
115 #define XMIT_BUF_TWO_READY   7
116 #define XMIT_SENDING_READY   8
117 
118 /* Receiver states */
119 #define RECV_WAIT_PACKET_TYPE   0
120 #define RECV_WAIT_EVENT_HEADER  1
121 #define RECV_WAIT_ACL_HEADER    2
122 #define RECV_WAIT_SCO_HEADER    3
123 #define RECV_WAIT_DATA          4
124 
125 /* Special packet types */
126 #define PKT_BAUD_RATE_57600   0x80
127 #define PKT_BAUD_RATE_115200  0x81
128 #define PKT_BAUD_RATE_230400  0x82
129 #define PKT_BAUD_RATE_460800  0x83
130 
131 
132 /* These are the register offsets */
133 #define REG_COMMAND     0x20
134 #define REG_INTERRUPT   0x21
135 #define REG_CONTROL     0x22
136 #define REG_RX_CONTROL  0x24
137 #define REG_CARD_RESET  0x30
138 #define REG_LED_CTRL    0x30
139 
140 /* REG_COMMAND */
141 #define REG_COMMAND_TX_BUF_ONE  0x01
142 #define REG_COMMAND_TX_BUF_TWO  0x02
143 #define REG_COMMAND_RX_BUF_ONE  0x04
144 #define REG_COMMAND_RX_BUF_TWO  0x08
145 #define REG_COMMAND_RX_WIN_ONE  0x00
146 #define REG_COMMAND_RX_WIN_TWO  0x10
147 
148 /* REG_CONTROL */
149 #define REG_CONTROL_BAUD_RATE_57600   0x00
150 #define REG_CONTROL_BAUD_RATE_115200  0x01
151 #define REG_CONTROL_BAUD_RATE_230400  0x02
152 #define REG_CONTROL_BAUD_RATE_460800  0x03
153 #define REG_CONTROL_RTS               0x04
154 #define REG_CONTROL_BT_ON             0x08
155 #define REG_CONTROL_BT_RESET          0x10
156 #define REG_CONTROL_BT_RES_PU         0x20
157 #define REG_CONTROL_INTERRUPT         0x40
158 #define REG_CONTROL_CARD_RESET        0x80
159 
160 /* REG_RX_CONTROL */
161 #define RTS_LEVEL_SHIFT_BITS  0x02
162 
163 
164 
165 /* ======================== LED handling routines ======================== */
166 
167 
168 static void bluecard_activity_led_timeout(u_long arg)
169 {
170 	bluecard_info_t *info = (bluecard_info_t *)arg;
171 	unsigned int iobase = info->link.io.BasePort1;
172 
173 	if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
174 		return;
175 
176 	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
177 		/* Disable activity LED */
178 		outb(0x08 | 0x20, iobase + 0x30);
179 	} else {
180 		/* Disable power LED */
181 		outb(0x00, iobase + 0x30);
182 	}
183 }
184 
185 
186 static void bluecard_enable_activity_led(bluecard_info_t *info)
187 {
188 	unsigned int iobase = info->link.io.BasePort1;
189 
190 	if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
191 		return;
192 
193 	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
194 		/* Enable activity LED */
195 		outb(0x10 | 0x40, iobase + 0x30);
196 
197 		/* Stop the LED after HZ/4 */
198 		mod_timer(&(info->timer), jiffies + HZ / 4);
199 	} else {
200 		/* Enable power LED */
201 		outb(0x08 | 0x20, iobase + 0x30);
202 
203 		/* Stop the LED after HZ/2 */
204 		mod_timer(&(info->timer), jiffies + HZ / 2);
205 	}
206 }
207 
208 
209 
210 /* ======================== Interrupt handling ======================== */
211 
212 
213 static int bluecard_write(unsigned int iobase, unsigned int offset, __u8 *buf, int len)
214 {
215 	int i, actual;
216 
217 	actual = (len > 15) ? 15 : len;
218 
219 	outb_p(actual, iobase + offset);
220 
221 	for (i = 0; i < actual; i++)
222 		outb_p(buf[i], iobase + offset + i + 1);
223 
224 	return actual;
225 }
226 
227 
228 static void bluecard_write_wakeup(bluecard_info_t *info)
229 {
230 	if (!info) {
231 		BT_ERR("Unknown device");
232 		return;
233 	}
234 
235 	if (!test_bit(XMIT_SENDING_READY, &(info->tx_state)))
236 		return;
237 
238 	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
239 		set_bit(XMIT_WAKEUP, &(info->tx_state));
240 		return;
241 	}
242 
243 	do {
244 		register unsigned int iobase = info->link.io.BasePort1;
245 		register unsigned int offset;
246 		register unsigned char command;
247 		register unsigned long ready_bit;
248 		register struct sk_buff *skb;
249 		register int len;
250 
251 		clear_bit(XMIT_WAKEUP, &(info->tx_state));
252 
253 		if (!(info->link.state & DEV_PRESENT))
254 			return;
255 
256 		if (test_bit(XMIT_BUFFER_NUMBER, &(info->tx_state))) {
257 			if (!test_bit(XMIT_BUF_TWO_READY, &(info->tx_state)))
258 				break;
259 			offset = 0x10;
260 			command = REG_COMMAND_TX_BUF_TWO;
261 			ready_bit = XMIT_BUF_TWO_READY;
262 		} else {
263 			if (!test_bit(XMIT_BUF_ONE_READY, &(info->tx_state)))
264 				break;
265 			offset = 0x00;
266 			command = REG_COMMAND_TX_BUF_ONE;
267 			ready_bit = XMIT_BUF_ONE_READY;
268 		}
269 
270 		if (!(skb = skb_dequeue(&(info->txq))))
271 			break;
272 
273 		if (skb->pkt_type & 0x80) {
274 			/* Disable RTS */
275 			info->ctrl_reg |= REG_CONTROL_RTS;
276 			outb(info->ctrl_reg, iobase + REG_CONTROL);
277 		}
278 
279 		/* Activate LED */
280 		bluecard_enable_activity_led(info);
281 
282 		/* Send frame */
283 		len = bluecard_write(iobase, offset, skb->data, skb->len);
284 
285 		/* Tell the FPGA to send the data */
286 		outb_p(command, iobase + REG_COMMAND);
287 
288 		/* Mark the buffer as dirty */
289 		clear_bit(ready_bit, &(info->tx_state));
290 
291 		if (skb->pkt_type & 0x80) {
292 			DECLARE_WAIT_QUEUE_HEAD(wq);
293 			DEFINE_WAIT(wait);
294 
295 			unsigned char baud_reg;
296 
297 			switch (skb->pkt_type) {
298 			case PKT_BAUD_RATE_460800:
299 				baud_reg = REG_CONTROL_BAUD_RATE_460800;
300 				break;
301 			case PKT_BAUD_RATE_230400:
302 				baud_reg = REG_CONTROL_BAUD_RATE_230400;
303 				break;
304 			case PKT_BAUD_RATE_115200:
305 				baud_reg = REG_CONTROL_BAUD_RATE_115200;
306 				break;
307 			case PKT_BAUD_RATE_57600:
308 				/* Fall through... */
309 			default:
310 				baud_reg = REG_CONTROL_BAUD_RATE_57600;
311 				break;
312 			}
313 
314 			/* Wait until the command reaches the baseband */
315 			prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE);
316 			schedule_timeout(HZ/10);
317 			finish_wait(&wq, &wait);
318 
319 			/* Set baud on baseband */
320 			info->ctrl_reg &= ~0x03;
321 			info->ctrl_reg |= baud_reg;
322 			outb(info->ctrl_reg, iobase + REG_CONTROL);
323 
324 			/* Enable RTS */
325 			info->ctrl_reg &= ~REG_CONTROL_RTS;
326 			outb(info->ctrl_reg, iobase + REG_CONTROL);
327 
328 			/* Wait before the next HCI packet can be send */
329 			prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE);
330 			schedule_timeout(HZ);
331 			finish_wait(&wq, &wait);
332 		}
333 
334 		if (len == skb->len) {
335 			kfree_skb(skb);
336 		} else {
337 			skb_pull(skb, len);
338 			skb_queue_head(&(info->txq), skb);
339 		}
340 
341 		info->hdev->stat.byte_tx += len;
342 
343 		/* Change buffer */
344 		change_bit(XMIT_BUFFER_NUMBER, &(info->tx_state));
345 
346 	} while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
347 
348 	clear_bit(XMIT_SENDING, &(info->tx_state));
349 }
350 
351 
352 static int bluecard_read(unsigned int iobase, unsigned int offset, __u8 *buf, int size)
353 {
354 	int i, n, len;
355 
356 	outb(REG_COMMAND_RX_WIN_ONE, iobase + REG_COMMAND);
357 
358 	len = inb(iobase + offset);
359 	n = 0;
360 	i = 1;
361 
362 	while (n < len) {
363 
364 		if (i == 16) {
365 			outb(REG_COMMAND_RX_WIN_TWO, iobase + REG_COMMAND);
366 			i = 0;
367 		}
368 
369 		buf[n] = inb(iobase + offset + i);
370 
371 		n++;
372 		i++;
373 
374 	}
375 
376 	return len;
377 }
378 
379 
380 static void bluecard_receive(bluecard_info_t *info, unsigned int offset)
381 {
382 	unsigned int iobase;
383 	unsigned char buf[31];
384 	int i, len;
385 
386 	if (!info) {
387 		BT_ERR("Unknown device");
388 		return;
389 	}
390 
391 	iobase = info->link.io.BasePort1;
392 
393 	if (test_bit(XMIT_SENDING_READY, &(info->tx_state)))
394 		bluecard_enable_activity_led(info);
395 
396 	len = bluecard_read(iobase, offset, buf, sizeof(buf));
397 
398 	for (i = 0; i < len; i++) {
399 
400 		/* Allocate packet */
401 		if (info->rx_skb == NULL) {
402 			info->rx_state = RECV_WAIT_PACKET_TYPE;
403 			info->rx_count = 0;
404 			if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
405 				BT_ERR("Can't allocate mem for new packet");
406 				return;
407 			}
408 		}
409 
410 		if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
411 
412 			info->rx_skb->dev = (void *) info->hdev;
413 			info->rx_skb->pkt_type = buf[i];
414 
415 			switch (info->rx_skb->pkt_type) {
416 
417 			case 0x00:
418 				/* init packet */
419 				if (offset != 0x00) {
420 					set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
421 					set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
422 					set_bit(XMIT_SENDING_READY, &(info->tx_state));
423 					bluecard_write_wakeup(info);
424 				}
425 
426 				kfree_skb(info->rx_skb);
427 				info->rx_skb = NULL;
428 				break;
429 
430 			case HCI_EVENT_PKT:
431 				info->rx_state = RECV_WAIT_EVENT_HEADER;
432 				info->rx_count = HCI_EVENT_HDR_SIZE;
433 				break;
434 
435 			case HCI_ACLDATA_PKT:
436 				info->rx_state = RECV_WAIT_ACL_HEADER;
437 				info->rx_count = HCI_ACL_HDR_SIZE;
438 				break;
439 
440 			case HCI_SCODATA_PKT:
441 				info->rx_state = RECV_WAIT_SCO_HEADER;
442 				info->rx_count = HCI_SCO_HDR_SIZE;
443 				break;
444 
445 			default:
446 				/* unknown packet */
447 				BT_ERR("Unknown HCI packet with type 0x%02x received", info->rx_skb->pkt_type);
448 				info->hdev->stat.err_rx++;
449 
450 				kfree_skb(info->rx_skb);
451 				info->rx_skb = NULL;
452 				break;
453 
454 			}
455 
456 		} else {
457 
458 			*skb_put(info->rx_skb, 1) = buf[i];
459 			info->rx_count--;
460 
461 			if (info->rx_count == 0) {
462 
463 				int dlen;
464 				struct hci_event_hdr *eh;
465 				struct hci_acl_hdr *ah;
466 				struct hci_sco_hdr *sh;
467 
468 				switch (info->rx_state) {
469 
470 				case RECV_WAIT_EVENT_HEADER:
471 					eh = (struct hci_event_hdr *)(info->rx_skb->data);
472 					info->rx_state = RECV_WAIT_DATA;
473 					info->rx_count = eh->plen;
474 					break;
475 
476 				case RECV_WAIT_ACL_HEADER:
477 					ah = (struct hci_acl_hdr *)(info->rx_skb->data);
478 					dlen = __le16_to_cpu(ah->dlen);
479 					info->rx_state = RECV_WAIT_DATA;
480 					info->rx_count = dlen;
481 					break;
482 
483 				case RECV_WAIT_SCO_HEADER:
484 					sh = (struct hci_sco_hdr *)(info->rx_skb->data);
485 					info->rx_state = RECV_WAIT_DATA;
486 					info->rx_count = sh->dlen;
487 					break;
488 
489 				case RECV_WAIT_DATA:
490 					hci_recv_frame(info->rx_skb);
491 					info->rx_skb = NULL;
492 					break;
493 
494 				}
495 
496 			}
497 
498 		}
499 
500 
501 	}
502 
503 	info->hdev->stat.byte_rx += len;
504 }
505 
506 
507 static irqreturn_t bluecard_interrupt(int irq, void *dev_inst, struct pt_regs *regs)
508 {
509 	bluecard_info_t *info = dev_inst;
510 	unsigned int iobase;
511 	unsigned char reg;
512 
513 	if (!info || !info->hdev) {
514 		BT_ERR("Call of irq %d for unknown device", irq);
515 		return IRQ_NONE;
516 	}
517 
518 	if (!test_bit(CARD_READY, &(info->hw_state)))
519 		return IRQ_HANDLED;
520 
521 	iobase = info->link.io.BasePort1;
522 
523 	spin_lock(&(info->lock));
524 
525 	/* Disable interrupt */
526 	info->ctrl_reg &= ~REG_CONTROL_INTERRUPT;
527 	outb(info->ctrl_reg, iobase + REG_CONTROL);
528 
529 	reg = inb(iobase + REG_INTERRUPT);
530 
531 	if ((reg != 0x00) && (reg != 0xff)) {
532 
533 		if (reg & 0x04) {
534 			bluecard_receive(info, 0x00);
535 			outb(0x04, iobase + REG_INTERRUPT);
536 			outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
537 		}
538 
539 		if (reg & 0x08) {
540 			bluecard_receive(info, 0x10);
541 			outb(0x08, iobase + REG_INTERRUPT);
542 			outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
543 		}
544 
545 		if (reg & 0x01) {
546 			set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
547 			outb(0x01, iobase + REG_INTERRUPT);
548 			bluecard_write_wakeup(info);
549 		}
550 
551 		if (reg & 0x02) {
552 			set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
553 			outb(0x02, iobase + REG_INTERRUPT);
554 			bluecard_write_wakeup(info);
555 		}
556 
557 	}
558 
559 	/* Enable interrupt */
560 	info->ctrl_reg |= REG_CONTROL_INTERRUPT;
561 	outb(info->ctrl_reg, iobase + REG_CONTROL);
562 
563 	spin_unlock(&(info->lock));
564 
565 	return IRQ_HANDLED;
566 }
567 
568 
569 
570 /* ======================== Device specific HCI commands ======================== */
571 
572 
573 static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud)
574 {
575 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
576 	struct sk_buff *skb;
577 
578 	/* Ericsson baud rate command */
579 	unsigned char cmd[] = { HCI_COMMAND_PKT, 0x09, 0xfc, 0x01, 0x03 };
580 
581 	if (!(skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
582 		BT_ERR("Can't allocate mem for new packet");
583 		return -1;
584 	}
585 
586 	switch (baud) {
587 	case 460800:
588 		cmd[4] = 0x00;
589 		skb->pkt_type = PKT_BAUD_RATE_460800;
590 		break;
591 	case 230400:
592 		cmd[4] = 0x01;
593 		skb->pkt_type = PKT_BAUD_RATE_230400;
594 		break;
595 	case 115200:
596 		cmd[4] = 0x02;
597 		skb->pkt_type = PKT_BAUD_RATE_115200;
598 		break;
599 	case 57600:
600 		/* Fall through... */
601 	default:
602 		cmd[4] = 0x03;
603 		skb->pkt_type = PKT_BAUD_RATE_57600;
604 		break;
605 	}
606 
607 	memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
608 
609 	skb_queue_tail(&(info->txq), skb);
610 
611 	bluecard_write_wakeup(info);
612 
613 	return 0;
614 }
615 
616 
617 
618 /* ======================== HCI interface ======================== */
619 
620 
621 static int bluecard_hci_flush(struct hci_dev *hdev)
622 {
623 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
624 
625 	/* Drop TX queue */
626 	skb_queue_purge(&(info->txq));
627 
628 	return 0;
629 }
630 
631 
632 static int bluecard_hci_open(struct hci_dev *hdev)
633 {
634 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
635 	unsigned int iobase = info->link.io.BasePort1;
636 
637 	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
638 		bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE);
639 
640 	if (test_and_set_bit(HCI_RUNNING, &(hdev->flags)))
641 		return 0;
642 
643 	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) {
644 		/* Enable LED */
645 		outb(0x08 | 0x20, iobase + 0x30);
646 	}
647 
648 	return 0;
649 }
650 
651 
652 static int bluecard_hci_close(struct hci_dev *hdev)
653 {
654 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
655 	unsigned int iobase = info->link.io.BasePort1;
656 
657 	if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
658 		return 0;
659 
660 	bluecard_hci_flush(hdev);
661 
662 	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) {
663 		/* Disable LED */
664 		outb(0x00, iobase + 0x30);
665 	}
666 
667 	return 0;
668 }
669 
670 
671 static int bluecard_hci_send_frame(struct sk_buff *skb)
672 {
673 	bluecard_info_t *info;
674 	struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
675 
676 	if (!hdev) {
677 		BT_ERR("Frame for unknown HCI device (hdev=NULL)");
678 		return -ENODEV;
679 	}
680 
681 	info = (bluecard_info_t *)(hdev->driver_data);
682 
683 	switch (skb->pkt_type) {
684 	case HCI_COMMAND_PKT:
685 		hdev->stat.cmd_tx++;
686 		break;
687 	case HCI_ACLDATA_PKT:
688 		hdev->stat.acl_tx++;
689 		break;
690 	case HCI_SCODATA_PKT:
691 		hdev->stat.sco_tx++;
692 		break;
693 	};
694 
695 	/* Prepend skb with frame type */
696 	memcpy(skb_push(skb, 1), &(skb->pkt_type), 1);
697 	skb_queue_tail(&(info->txq), skb);
698 
699 	bluecard_write_wakeup(info);
700 
701 	return 0;
702 }
703 
704 
705 static void bluecard_hci_destruct(struct hci_dev *hdev)
706 {
707 }
708 
709 
710 static int bluecard_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
711 {
712 	return -ENOIOCTLCMD;
713 }
714 
715 
716 
717 /* ======================== Card services HCI interaction ======================== */
718 
719 
720 static int bluecard_open(bluecard_info_t *info)
721 {
722 	unsigned int iobase = info->link.io.BasePort1;
723 	struct hci_dev *hdev;
724 	unsigned char id;
725 
726 	spin_lock_init(&(info->lock));
727 
728 	init_timer(&(info->timer));
729 	info->timer.function = &bluecard_activity_led_timeout;
730 	info->timer.data = (u_long)info;
731 
732 	skb_queue_head_init(&(info->txq));
733 
734 	info->rx_state = RECV_WAIT_PACKET_TYPE;
735 	info->rx_count = 0;
736 	info->rx_skb = NULL;
737 
738 	/* Initialize HCI device */
739 	hdev = hci_alloc_dev();
740 	if (!hdev) {
741 		BT_ERR("Can't allocate HCI device");
742 		return -ENOMEM;
743 	}
744 
745 	info->hdev = hdev;
746 
747 	hdev->type = HCI_PCCARD;
748 	hdev->driver_data = info;
749 
750 	hdev->open     = bluecard_hci_open;
751 	hdev->close    = bluecard_hci_close;
752 	hdev->flush    = bluecard_hci_flush;
753 	hdev->send     = bluecard_hci_send_frame;
754 	hdev->destruct = bluecard_hci_destruct;
755 	hdev->ioctl    = bluecard_hci_ioctl;
756 
757 	hdev->owner = THIS_MODULE;
758 
759 	id = inb(iobase + 0x30);
760 
761 	if ((id & 0x0f) == 0x02)
762 		set_bit(CARD_HAS_PCCARD_ID, &(info->hw_state));
763 
764 	if (id & 0x10)
765 		set_bit(CARD_HAS_POWER_LED, &(info->hw_state));
766 
767 	if (id & 0x20)
768 		set_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state));
769 
770 	/* Reset card */
771 	info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
772 	outb(info->ctrl_reg, iobase + REG_CONTROL);
773 
774 	/* Turn FPGA off */
775 	outb(0x80, iobase + 0x30);
776 
777 	/* Wait some time */
778 	msleep(10);
779 
780 	/* Turn FPGA on */
781 	outb(0x00, iobase + 0x30);
782 
783 	/* Activate card */
784 	info->ctrl_reg = REG_CONTROL_BT_ON | REG_CONTROL_BT_RES_PU;
785 	outb(info->ctrl_reg, iobase + REG_CONTROL);
786 
787 	/* Enable interrupt */
788 	outb(0xff, iobase + REG_INTERRUPT);
789 	info->ctrl_reg |= REG_CONTROL_INTERRUPT;
790 	outb(info->ctrl_reg, iobase + REG_CONTROL);
791 
792 	if ((id & 0x0f) == 0x03) {
793 		/* Disable RTS */
794 		info->ctrl_reg |= REG_CONTROL_RTS;
795 		outb(info->ctrl_reg, iobase + REG_CONTROL);
796 
797 		/* Set baud rate */
798 		info->ctrl_reg |= 0x03;
799 		outb(info->ctrl_reg, iobase + REG_CONTROL);
800 
801 		/* Enable RTS */
802 		info->ctrl_reg &= ~REG_CONTROL_RTS;
803 		outb(info->ctrl_reg, iobase + REG_CONTROL);
804 
805 		set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
806 		set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
807 		set_bit(XMIT_SENDING_READY, &(info->tx_state));
808 	}
809 
810 	/* Start the RX buffers */
811 	outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
812 	outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
813 
814 	/* Signal that the hardware is ready */
815 	set_bit(CARD_READY, &(info->hw_state));
816 
817 	/* Drop TX queue */
818 	skb_queue_purge(&(info->txq));
819 
820 	/* Control the point at which RTS is enabled */
821 	outb((0x0f << RTS_LEVEL_SHIFT_BITS) | 1, iobase + REG_RX_CONTROL);
822 
823 	/* Timeout before it is safe to send the first HCI packet */
824 	msleep(1250);
825 
826 	/* Register HCI device */
827 	if (hci_register_dev(hdev) < 0) {
828 		BT_ERR("Can't register HCI device");
829 		info->hdev = NULL;
830 		hci_free_dev(hdev);
831 		return -ENODEV;
832 	}
833 
834 	return 0;
835 }
836 
837 
838 static int bluecard_close(bluecard_info_t *info)
839 {
840 	unsigned int iobase = info->link.io.BasePort1;
841 	struct hci_dev *hdev = info->hdev;
842 
843 	if (!hdev)
844 		return -ENODEV;
845 
846 	bluecard_hci_close(hdev);
847 
848 	clear_bit(CARD_READY, &(info->hw_state));
849 
850 	/* Reset card */
851 	info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
852 	outb(info->ctrl_reg, iobase + REG_CONTROL);
853 
854 	/* Turn FPGA off */
855 	outb(0x80, iobase + 0x30);
856 
857 	if (hci_unregister_dev(hdev) < 0)
858 		BT_ERR("Can't unregister HCI device %s", hdev->name);
859 
860 	hci_free_dev(hdev);
861 
862 	return 0;
863 }
864 
865 static dev_link_t *bluecard_attach(void)
866 {
867 	bluecard_info_t *info;
868 	client_reg_t client_reg;
869 	dev_link_t *link;
870 	int ret;
871 
872 	/* Create new info device */
873 	info = kmalloc(sizeof(*info), GFP_KERNEL);
874 	if (!info)
875 		return NULL;
876 	memset(info, 0, sizeof(*info));
877 
878 	link = &info->link;
879 	link->priv = info;
880 
881 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
882 	link->io.NumPorts1 = 8;
883 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
884 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
885 
886 	link->irq.Handler = bluecard_interrupt;
887 	link->irq.Instance = info;
888 
889 	link->conf.Attributes = CONF_ENABLE_IRQ;
890 	link->conf.Vcc = 50;
891 	link->conf.IntType = INT_MEMORY_AND_IO;
892 
893 	/* Register with Card Services */
894 	link->next = dev_list;
895 	dev_list = link;
896 	client_reg.dev_info = &dev_info;
897 	client_reg.Version = 0x0210;
898 	client_reg.event_callback_args.client_data = link;
899 
900 	ret = pcmcia_register_client(&link->handle, &client_reg);
901 	if (ret != CS_SUCCESS) {
902 		cs_error(link->handle, RegisterClient, ret);
903 		bluecard_detach(link);
904 		return NULL;
905 	}
906 
907 	return link;
908 }
909 
910 
911 static void bluecard_detach(dev_link_t *link)
912 {
913 	bluecard_info_t *info = link->priv;
914 	dev_link_t **linkp;
915 	int ret;
916 
917 	/* Locate device structure */
918 	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
919 		if (*linkp == link)
920 			break;
921 
922 	if (*linkp == NULL)
923 		return;
924 
925 	if (link->state & DEV_CONFIG)
926 		bluecard_release(link);
927 
928 	if (link->handle) {
929 		ret = pcmcia_deregister_client(link->handle);
930 		if (ret != CS_SUCCESS)
931 			cs_error(link->handle, DeregisterClient, ret);
932 	}
933 
934 	/* Unlink device structure, free bits */
935 	*linkp = link->next;
936 
937 	kfree(info);
938 }
939 
940 
941 static int first_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse)
942 {
943 	int i;
944 
945 	i = pcmcia_get_first_tuple(handle, tuple);
946 	if (i != CS_SUCCESS)
947 		return CS_NO_MORE_ITEMS;
948 
949 	i = pcmcia_get_tuple_data(handle, tuple);
950 	if (i != CS_SUCCESS)
951 		return i;
952 
953 	return pcmcia_parse_tuple(handle, tuple, parse);
954 }
955 
956 static void bluecard_config(dev_link_t *link)
957 {
958 	client_handle_t handle = link->handle;
959 	bluecard_info_t *info = link->priv;
960 	tuple_t tuple;
961 	u_short buf[256];
962 	cisparse_t parse;
963 	config_info_t config;
964 	int i, n, last_ret, last_fn;
965 
966 	tuple.TupleData = (cisdata_t *)buf;
967 	tuple.TupleOffset = 0;
968 	tuple.TupleDataMax = 255;
969 	tuple.Attributes = 0;
970 
971 	/* Get configuration register information */
972 	tuple.DesiredTuple = CISTPL_CONFIG;
973 	last_ret = first_tuple(handle, &tuple, &parse);
974 	if (last_ret != CS_SUCCESS) {
975 		last_fn = ParseTuple;
976 		goto cs_failed;
977 	}
978 	link->conf.ConfigBase = parse.config.base;
979 	link->conf.Present = parse.config.rmask[0];
980 
981 	/* Configure card */
982 	link->state |= DEV_CONFIG;
983 	i = pcmcia_get_configuration_info(handle, &config);
984 	link->conf.Vcc = config.Vcc;
985 
986 	link->conf.ConfigIndex = 0x20;
987 	link->io.NumPorts1 = 64;
988 	link->io.IOAddrLines = 6;
989 
990 	for (n = 0; n < 0x400; n += 0x40) {
991 		link->io.BasePort1 = n ^ 0x300;
992 		i = pcmcia_request_io(link->handle, &link->io);
993 		if (i == CS_SUCCESS)
994 			break;
995 	}
996 
997 	if (i != CS_SUCCESS) {
998 		cs_error(link->handle, RequestIO, i);
999 		goto failed;
1000 	}
1001 
1002 	i = pcmcia_request_irq(link->handle, &link->irq);
1003 	if (i != CS_SUCCESS) {
1004 		cs_error(link->handle, RequestIRQ, i);
1005 		link->irq.AssignedIRQ = 0;
1006 	}
1007 
1008 	i = pcmcia_request_configuration(link->handle, &link->conf);
1009 	if (i != CS_SUCCESS) {
1010 		cs_error(link->handle, RequestConfiguration, i);
1011 		goto failed;
1012 	}
1013 
1014 	if (bluecard_open(info) != 0)
1015 		goto failed;
1016 
1017 	strcpy(info->node.dev_name, info->hdev->name);
1018 	link->dev = &info->node;
1019 	link->state &= ~DEV_CONFIG_PENDING;
1020 
1021 	return;
1022 
1023 cs_failed:
1024 	cs_error(link->handle, last_fn, last_ret);
1025 
1026 failed:
1027 	bluecard_release(link);
1028 }
1029 
1030 
1031 static void bluecard_release(dev_link_t *link)
1032 {
1033 	bluecard_info_t *info = link->priv;
1034 
1035 	if (link->state & DEV_PRESENT)
1036 		bluecard_close(info);
1037 
1038 	del_timer(&(info->timer));
1039 
1040 	link->dev = NULL;
1041 
1042 	pcmcia_release_configuration(link->handle);
1043 	pcmcia_release_io(link->handle, &link->io);
1044 	pcmcia_release_irq(link->handle, &link->irq);
1045 
1046 	link->state &= ~DEV_CONFIG;
1047 }
1048 
1049 
1050 static int bluecard_event(event_t event, int priority, event_callback_args_t *args)
1051 {
1052 	dev_link_t *link = args->client_data;
1053 	bluecard_info_t *info = link->priv;
1054 
1055 	switch (event) {
1056 	case CS_EVENT_CARD_REMOVAL:
1057 		link->state &= ~DEV_PRESENT;
1058 		if (link->state & DEV_CONFIG) {
1059 			bluecard_close(info);
1060 			bluecard_release(link);
1061 		}
1062 		break;
1063 	case CS_EVENT_CARD_INSERTION:
1064 		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
1065 		bluecard_config(link);
1066 		break;
1067 	case CS_EVENT_PM_SUSPEND:
1068 		link->state |= DEV_SUSPEND;
1069 		/* Fall through... */
1070 	case CS_EVENT_RESET_PHYSICAL:
1071 		if (link->state & DEV_CONFIG)
1072 			pcmcia_release_configuration(link->handle);
1073 		break;
1074 	case CS_EVENT_PM_RESUME:
1075 		link->state &= ~DEV_SUSPEND;
1076 		/* Fall through... */
1077 	case CS_EVENT_CARD_RESET:
1078 		if (DEV_OK(link))
1079 			pcmcia_request_configuration(link->handle, &link->conf);
1080 		break;
1081 	}
1082 
1083 	return 0;
1084 }
1085 
1086 static struct pcmcia_device_id bluecard_ids[] = {
1087 	PCMCIA_DEVICE_PROD_ID12("BlueCard", "LSE041", 0xbaf16fbf, 0x657cc15e),
1088 	PCMCIA_DEVICE_PROD_ID12("BTCFCARD", "LSE139", 0xe3987764, 0x2524b59c),
1089 	PCMCIA_DEVICE_PROD_ID12("WSS", "LSE039", 0x0a0736ec, 0x24e6dfab),
1090 	PCMCIA_DEVICE_NULL
1091 };
1092 MODULE_DEVICE_TABLE(pcmcia, bluecard_ids);
1093 
1094 static struct pcmcia_driver bluecard_driver = {
1095 	.owner		= THIS_MODULE,
1096 	.drv		= {
1097 		.name	= "bluecard_cs",
1098 	},
1099 	.attach		= bluecard_attach,
1100 	.event		= bluecard_event,
1101 	.detach		= bluecard_detach,
1102 	.id_table	= bluecard_ids,
1103 };
1104 
1105 static int __init init_bluecard_cs(void)
1106 {
1107 	return pcmcia_register_driver(&bluecard_driver);
1108 }
1109 
1110 
1111 static void __exit exit_bluecard_cs(void)
1112 {
1113 	pcmcia_unregister_driver(&bluecard_driver);
1114 	BUG_ON(dev_list != NULL);
1115 }
1116 
1117 module_init(init_bluecard_cs);
1118 module_exit(exit_bluecard_cs);
1119