1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Driver for the Micron P320 SSD 4 * Copyright (C) 2011 Micron Technology, Inc. 5 * 6 * Portions of this code were derived from works subjected to the 7 * following copyright: 8 * Copyright (C) 2009 Integrated Device Technology, Inc. 9 */ 10 11 #include <linux/pci.h> 12 #include <linux/interrupt.h> 13 #include <linux/ata.h> 14 #include <linux/delay.h> 15 #include <linux/hdreg.h> 16 #include <linux/uaccess.h> 17 #include <linux/random.h> 18 #include <linux/smp.h> 19 #include <linux/compat.h> 20 #include <linux/fs.h> 21 #include <linux/module.h> 22 #include <linux/genhd.h> 23 #include <linux/blkdev.h> 24 #include <linux/blk-mq.h> 25 #include <linux/bio.h> 26 #include <linux/dma-mapping.h> 27 #include <linux/idr.h> 28 #include <linux/kthread.h> 29 #include <../drivers/ata/ahci.h> 30 #include <linux/export.h> 31 #include <linux/debugfs.h> 32 #include <linux/prefetch.h> 33 #include <linux/numa.h> 34 #include "mtip32xx.h" 35 36 #define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32) 37 38 /* DMA region containing RX Fis, Identify, RLE10, and SMART buffers */ 39 #define AHCI_RX_FIS_SZ 0x100 40 #define AHCI_RX_FIS_OFFSET 0x0 41 #define AHCI_IDFY_SZ ATA_SECT_SIZE 42 #define AHCI_IDFY_OFFSET 0x400 43 #define AHCI_SECTBUF_SZ ATA_SECT_SIZE 44 #define AHCI_SECTBUF_OFFSET 0x800 45 #define AHCI_SMARTBUF_SZ ATA_SECT_SIZE 46 #define AHCI_SMARTBUF_OFFSET 0xC00 47 /* 0x100 + 0x200 + 0x200 + 0x200 is smaller than 4k but we pad it out */ 48 #define BLOCK_DMA_ALLOC_SZ 4096 49 50 /* DMA region containing command table (should be 8192 bytes) */ 51 #define AHCI_CMD_SLOT_SZ sizeof(struct mtip_cmd_hdr) 52 #define AHCI_CMD_TBL_SZ (MTIP_MAX_COMMAND_SLOTS * AHCI_CMD_SLOT_SZ) 53 #define AHCI_CMD_TBL_OFFSET 0x0 54 55 /* DMA region per command (contains header and SGL) */ 56 #define AHCI_CMD_TBL_HDR_SZ 0x80 57 #define AHCI_CMD_TBL_HDR_OFFSET 0x0 58 #define AHCI_CMD_TBL_SGL_SZ (MTIP_MAX_SG * sizeof(struct mtip_cmd_sg)) 59 #define AHCI_CMD_TBL_SGL_OFFSET AHCI_CMD_TBL_HDR_SZ 60 #define CMD_DMA_ALLOC_SZ (AHCI_CMD_TBL_SGL_SZ + AHCI_CMD_TBL_HDR_SZ) 61 62 63 #define HOST_CAP_NZDMA (1 << 19) 64 #define HOST_HSORG 0xFC 65 #define HSORG_DISABLE_SLOTGRP_INTR (1<<24) 66 #define HSORG_DISABLE_SLOTGRP_PXIS (1<<16) 67 #define HSORG_HWREV 0xFF00 68 #define HSORG_STYLE 0x8 69 #define HSORG_SLOTGROUPS 0x7 70 71 #define PORT_COMMAND_ISSUE 0x38 72 #define PORT_SDBV 0x7C 73 74 #define PORT_OFFSET 0x100 75 #define PORT_MEM_SIZE 0x80 76 77 #define PORT_IRQ_ERR \ 78 (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | PORT_IRQ_CONNECT | \ 79 PORT_IRQ_PHYRDY | PORT_IRQ_UNK_FIS | PORT_IRQ_BAD_PMP | \ 80 PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_NONFATAL | \ 81 PORT_IRQ_OVERFLOW) 82 #define PORT_IRQ_LEGACY \ 83 (PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) 84 #define PORT_IRQ_HANDLED \ 85 (PORT_IRQ_SDB_FIS | PORT_IRQ_LEGACY | \ 86 PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR | \ 87 PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY) 88 #define DEF_PORT_IRQ \ 89 (PORT_IRQ_ERR | PORT_IRQ_LEGACY | PORT_IRQ_SDB_FIS) 90 91 /* product numbers */ 92 #define MTIP_PRODUCT_UNKNOWN 0x00 93 #define MTIP_PRODUCT_ASICFPGA 0x11 94 95 /* Device instance number, incremented each time a device is probed. */ 96 static int instance; 97 98 static LIST_HEAD(online_list); 99 static LIST_HEAD(removing_list); 100 static DEFINE_SPINLOCK(dev_lock); 101 102 /* 103 * Global variable used to hold the major block device number 104 * allocated in mtip_init(). 105 */ 106 static int mtip_major; 107 static struct dentry *dfs_parent; 108 static struct dentry *dfs_device_status; 109 110 static u32 cpu_use[NR_CPUS]; 111 112 static DEFINE_IDA(rssd_index_ida); 113 114 static int mtip_block_initialize(struct driver_data *dd); 115 116 #ifdef CONFIG_COMPAT 117 struct mtip_compat_ide_task_request_s { 118 __u8 io_ports[8]; 119 __u8 hob_ports[8]; 120 ide_reg_valid_t out_flags; 121 ide_reg_valid_t in_flags; 122 int data_phase; 123 int req_cmd; 124 compat_ulong_t out_size; 125 compat_ulong_t in_size; 126 }; 127 #endif 128 129 /* 130 * This function check_for_surprise_removal is called 131 * while card is removed from the system and it will 132 * read the vendor id from the configuration space 133 * 134 * @pdev Pointer to the pci_dev structure. 135 * 136 * return value 137 * true if device removed, else false 138 */ 139 static bool mtip_check_surprise_removal(struct driver_data *dd) 140 { 141 u16 vendor_id = 0; 142 143 if (dd->sr) 144 return true; 145 146 /* Read the vendorID from the configuration space */ 147 pci_read_config_word(dd->pdev, 0x00, &vendor_id); 148 if (vendor_id == 0xFFFF) { 149 dd->sr = true; 150 if (dd->queue) 151 blk_queue_flag_set(QUEUE_FLAG_DEAD, dd->queue); 152 else 153 dev_warn(&dd->pdev->dev, 154 "%s: dd->queue is NULL\n", __func__); 155 return true; /* device removed */ 156 } 157 158 return false; /* device present */ 159 } 160 161 static struct mtip_cmd *mtip_cmd_from_tag(struct driver_data *dd, 162 unsigned int tag) 163 { 164 struct blk_mq_hw_ctx *hctx = dd->queue->queue_hw_ctx[0]; 165 166 return blk_mq_rq_to_pdu(blk_mq_tag_to_rq(hctx->tags, tag)); 167 } 168 169 /* 170 * Reset the HBA (without sleeping) 171 * 172 * @dd Pointer to the driver data structure. 173 * 174 * return value 175 * 0 The reset was successful. 176 * -1 The HBA Reset bit did not clear. 177 */ 178 static int mtip_hba_reset(struct driver_data *dd) 179 { 180 unsigned long timeout; 181 182 /* Set the reset bit */ 183 writel(HOST_RESET, dd->mmio + HOST_CTL); 184 185 /* Flush */ 186 readl(dd->mmio + HOST_CTL); 187 188 /* 189 * Spin for up to 10 seconds waiting for reset acknowledgement. Spec 190 * is 1 sec but in LUN failure conditions, up to 10 secs are required 191 */ 192 timeout = jiffies + msecs_to_jiffies(10000); 193 do { 194 mdelay(10); 195 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) 196 return -1; 197 198 } while ((readl(dd->mmio + HOST_CTL) & HOST_RESET) 199 && time_before(jiffies, timeout)); 200 201 if (readl(dd->mmio + HOST_CTL) & HOST_RESET) 202 return -1; 203 204 return 0; 205 } 206 207 /* 208 * Issue a command to the hardware. 209 * 210 * Set the appropriate bit in the s_active and Command Issue hardware 211 * registers, causing hardware command processing to begin. 212 * 213 * @port Pointer to the port structure. 214 * @tag The tag of the command to be issued. 215 * 216 * return value 217 * None 218 */ 219 static inline void mtip_issue_ncq_command(struct mtip_port *port, int tag) 220 { 221 int group = tag >> 5; 222 223 /* guard SACT and CI registers */ 224 spin_lock(&port->cmd_issue_lock[group]); 225 writel((1 << MTIP_TAG_BIT(tag)), 226 port->s_active[MTIP_TAG_INDEX(tag)]); 227 writel((1 << MTIP_TAG_BIT(tag)), 228 port->cmd_issue[MTIP_TAG_INDEX(tag)]); 229 spin_unlock(&port->cmd_issue_lock[group]); 230 } 231 232 /* 233 * Enable/disable the reception of FIS 234 * 235 * @port Pointer to the port data structure 236 * @enable 1 to enable, 0 to disable 237 * 238 * return value 239 * Previous state: 1 enabled, 0 disabled 240 */ 241 static int mtip_enable_fis(struct mtip_port *port, int enable) 242 { 243 u32 tmp; 244 245 /* enable FIS reception */ 246 tmp = readl(port->mmio + PORT_CMD); 247 if (enable) 248 writel(tmp | PORT_CMD_FIS_RX, port->mmio + PORT_CMD); 249 else 250 writel(tmp & ~PORT_CMD_FIS_RX, port->mmio + PORT_CMD); 251 252 /* Flush */ 253 readl(port->mmio + PORT_CMD); 254 255 return (((tmp & PORT_CMD_FIS_RX) == PORT_CMD_FIS_RX)); 256 } 257 258 /* 259 * Enable/disable the DMA engine 260 * 261 * @port Pointer to the port data structure 262 * @enable 1 to enable, 0 to disable 263 * 264 * return value 265 * Previous state: 1 enabled, 0 disabled. 266 */ 267 static int mtip_enable_engine(struct mtip_port *port, int enable) 268 { 269 u32 tmp; 270 271 /* enable FIS reception */ 272 tmp = readl(port->mmio + PORT_CMD); 273 if (enable) 274 writel(tmp | PORT_CMD_START, port->mmio + PORT_CMD); 275 else 276 writel(tmp & ~PORT_CMD_START, port->mmio + PORT_CMD); 277 278 readl(port->mmio + PORT_CMD); 279 return (((tmp & PORT_CMD_START) == PORT_CMD_START)); 280 } 281 282 /* 283 * Enables the port DMA engine and FIS reception. 284 * 285 * return value 286 * None 287 */ 288 static inline void mtip_start_port(struct mtip_port *port) 289 { 290 /* Enable FIS reception */ 291 mtip_enable_fis(port, 1); 292 293 /* Enable the DMA engine */ 294 mtip_enable_engine(port, 1); 295 } 296 297 /* 298 * Deinitialize a port by disabling port interrupts, the DMA engine, 299 * and FIS reception. 300 * 301 * @port Pointer to the port structure 302 * 303 * return value 304 * None 305 */ 306 static inline void mtip_deinit_port(struct mtip_port *port) 307 { 308 /* Disable interrupts on this port */ 309 writel(0, port->mmio + PORT_IRQ_MASK); 310 311 /* Disable the DMA engine */ 312 mtip_enable_engine(port, 0); 313 314 /* Disable FIS reception */ 315 mtip_enable_fis(port, 0); 316 } 317 318 /* 319 * Initialize a port. 320 * 321 * This function deinitializes the port by calling mtip_deinit_port() and 322 * then initializes it by setting the command header and RX FIS addresses, 323 * clearing the SError register and any pending port interrupts before 324 * re-enabling the default set of port interrupts. 325 * 326 * @port Pointer to the port structure. 327 * 328 * return value 329 * None 330 */ 331 static void mtip_init_port(struct mtip_port *port) 332 { 333 int i; 334 mtip_deinit_port(port); 335 336 /* Program the command list base and FIS base addresses */ 337 if (readl(port->dd->mmio + HOST_CAP) & HOST_CAP_64) { 338 writel((port->command_list_dma >> 16) >> 16, 339 port->mmio + PORT_LST_ADDR_HI); 340 writel((port->rxfis_dma >> 16) >> 16, 341 port->mmio + PORT_FIS_ADDR_HI); 342 set_bit(MTIP_PF_HOST_CAP_64, &port->flags); 343 } 344 345 writel(port->command_list_dma & 0xFFFFFFFF, 346 port->mmio + PORT_LST_ADDR); 347 writel(port->rxfis_dma & 0xFFFFFFFF, port->mmio + PORT_FIS_ADDR); 348 349 /* Clear SError */ 350 writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR); 351 352 /* reset the completed registers.*/ 353 for (i = 0; i < port->dd->slot_groups; i++) 354 writel(0xFFFFFFFF, port->completed[i]); 355 356 /* Clear any pending interrupts for this port */ 357 writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT); 358 359 /* Clear any pending interrupts on the HBA. */ 360 writel(readl(port->dd->mmio + HOST_IRQ_STAT), 361 port->dd->mmio + HOST_IRQ_STAT); 362 363 /* Enable port interrupts */ 364 writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK); 365 } 366 367 /* 368 * Restart a port 369 * 370 * @port Pointer to the port data structure. 371 * 372 * return value 373 * None 374 */ 375 static void mtip_restart_port(struct mtip_port *port) 376 { 377 unsigned long timeout; 378 379 /* Disable the DMA engine */ 380 mtip_enable_engine(port, 0); 381 382 /* Chip quirk: wait up to 500ms for PxCMD.CR == 0 */ 383 timeout = jiffies + msecs_to_jiffies(500); 384 while ((readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON) 385 && time_before(jiffies, timeout)) 386 ; 387 388 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) 389 return; 390 391 /* 392 * Chip quirk: escalate to hba reset if 393 * PxCMD.CR not clear after 500 ms 394 */ 395 if (readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON) { 396 dev_warn(&port->dd->pdev->dev, 397 "PxCMD.CR not clear, escalating reset\n"); 398 399 if (mtip_hba_reset(port->dd)) 400 dev_err(&port->dd->pdev->dev, 401 "HBA reset escalation failed.\n"); 402 403 /* 30 ms delay before com reset to quiesce chip */ 404 mdelay(30); 405 } 406 407 dev_warn(&port->dd->pdev->dev, "Issuing COM reset\n"); 408 409 /* Set PxSCTL.DET */ 410 writel(readl(port->mmio + PORT_SCR_CTL) | 411 1, port->mmio + PORT_SCR_CTL); 412 readl(port->mmio + PORT_SCR_CTL); 413 414 /* Wait 1 ms to quiesce chip function */ 415 timeout = jiffies + msecs_to_jiffies(1); 416 while (time_before(jiffies, timeout)) 417 ; 418 419 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) 420 return; 421 422 /* Clear PxSCTL.DET */ 423 writel(readl(port->mmio + PORT_SCR_CTL) & ~1, 424 port->mmio + PORT_SCR_CTL); 425 readl(port->mmio + PORT_SCR_CTL); 426 427 /* Wait 500 ms for bit 0 of PORT_SCR_STS to be set */ 428 timeout = jiffies + msecs_to_jiffies(500); 429 while (((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0) 430 && time_before(jiffies, timeout)) 431 ; 432 433 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) 434 return; 435 436 if ((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0) 437 dev_warn(&port->dd->pdev->dev, 438 "COM reset failed\n"); 439 440 mtip_init_port(port); 441 mtip_start_port(port); 442 443 } 444 445 static int mtip_device_reset(struct driver_data *dd) 446 { 447 int rv = 0; 448 449 if (mtip_check_surprise_removal(dd)) 450 return 0; 451 452 if (mtip_hba_reset(dd) < 0) 453 rv = -EFAULT; 454 455 mdelay(1); 456 mtip_init_port(dd->port); 457 mtip_start_port(dd->port); 458 459 /* Enable interrupts on the HBA. */ 460 writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, 461 dd->mmio + HOST_CTL); 462 return rv; 463 } 464 465 /* 466 * Helper function for tag logging 467 */ 468 static void print_tags(struct driver_data *dd, 469 char *msg, 470 unsigned long *tagbits, 471 int cnt) 472 { 473 unsigned char tagmap[128]; 474 int group, tagmap_len = 0; 475 476 memset(tagmap, 0, sizeof(tagmap)); 477 for (group = SLOTBITS_IN_LONGS; group > 0; group--) 478 tagmap_len += sprintf(tagmap + tagmap_len, "%016lX ", 479 tagbits[group-1]); 480 dev_warn(&dd->pdev->dev, 481 "%d command(s) %s: tagmap [%s]", cnt, msg, tagmap); 482 } 483 484 static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer, 485 dma_addr_t buffer_dma, unsigned int sectors); 486 static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, 487 struct smart_attr *attrib); 488 489 static void mtip_complete_command(struct mtip_cmd *cmd, blk_status_t status) 490 { 491 struct request *req = blk_mq_rq_from_pdu(cmd); 492 493 cmd->status = status; 494 if (likely(!blk_should_fake_timeout(req->q))) 495 blk_mq_complete_request(req); 496 } 497 498 /* 499 * Handle an error. 500 * 501 * @dd Pointer to the DRIVER_DATA structure. 502 * 503 * return value 504 * None 505 */ 506 static void mtip_handle_tfe(struct driver_data *dd) 507 { 508 int group, tag, bit, reissue, rv; 509 struct mtip_port *port; 510 struct mtip_cmd *cmd; 511 u32 completed; 512 struct host_to_dev_fis *fis; 513 unsigned long tagaccum[SLOTBITS_IN_LONGS]; 514 unsigned int cmd_cnt = 0; 515 unsigned char *buf; 516 char *fail_reason = NULL; 517 int fail_all_ncq_write = 0, fail_all_ncq_cmds = 0; 518 519 dev_warn(&dd->pdev->dev, "Taskfile error\n"); 520 521 port = dd->port; 522 523 if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) { 524 cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL); 525 dbg_printk(MTIP_DRV_NAME " TFE for the internal command\n"); 526 mtip_complete_command(cmd, BLK_STS_IOERR); 527 return; 528 } 529 530 /* clear the tag accumulator */ 531 memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); 532 533 /* Loop through all the groups */ 534 for (group = 0; group < dd->slot_groups; group++) { 535 completed = readl(port->completed[group]); 536 537 dev_warn(&dd->pdev->dev, "g=%u, comp=%x\n", group, completed); 538 539 /* clear completed status register in the hardware.*/ 540 writel(completed, port->completed[group]); 541 542 /* Process successfully completed commands */ 543 for (bit = 0; bit < 32 && completed; bit++) { 544 if (!(completed & (1<<bit))) 545 continue; 546 tag = (group << 5) + bit; 547 548 /* Skip the internal command slot */ 549 if (tag == MTIP_TAG_INTERNAL) 550 continue; 551 552 cmd = mtip_cmd_from_tag(dd, tag); 553 mtip_complete_command(cmd, 0); 554 set_bit(tag, tagaccum); 555 cmd_cnt++; 556 } 557 } 558 559 print_tags(dd, "completed (TFE)", tagaccum, cmd_cnt); 560 561 /* Restart the port */ 562 mdelay(20); 563 mtip_restart_port(port); 564 565 /* Trying to determine the cause of the error */ 566 rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ, 567 dd->port->log_buf, 568 dd->port->log_buf_dma, 1); 569 if (rv) { 570 dev_warn(&dd->pdev->dev, 571 "Error in READ LOG EXT (10h) command\n"); 572 /* non-critical error, don't fail the load */ 573 } else { 574 buf = (unsigned char *)dd->port->log_buf; 575 if (buf[259] & 0x1) { 576 dev_info(&dd->pdev->dev, 577 "Write protect bit is set.\n"); 578 set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag); 579 fail_all_ncq_write = 1; 580 fail_reason = "write protect"; 581 } 582 if (buf[288] == 0xF7) { 583 dev_info(&dd->pdev->dev, 584 "Exceeded Tmax, drive in thermal shutdown.\n"); 585 set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag); 586 fail_all_ncq_cmds = 1; 587 fail_reason = "thermal shutdown"; 588 } 589 if (buf[288] == 0xBF) { 590 set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag); 591 dev_info(&dd->pdev->dev, 592 "Drive indicates rebuild has failed. Secure erase required.\n"); 593 fail_all_ncq_cmds = 1; 594 fail_reason = "rebuild failed"; 595 } 596 } 597 598 /* clear the tag accumulator */ 599 memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); 600 601 /* Loop through all the groups */ 602 for (group = 0; group < dd->slot_groups; group++) { 603 for (bit = 0; bit < 32; bit++) { 604 reissue = 1; 605 tag = (group << 5) + bit; 606 cmd = mtip_cmd_from_tag(dd, tag); 607 608 fis = (struct host_to_dev_fis *)cmd->command; 609 610 /* Should re-issue? */ 611 if (tag == MTIP_TAG_INTERNAL || 612 fis->command == ATA_CMD_SET_FEATURES) 613 reissue = 0; 614 else { 615 if (fail_all_ncq_cmds || 616 (fail_all_ncq_write && 617 fis->command == ATA_CMD_FPDMA_WRITE)) { 618 dev_warn(&dd->pdev->dev, 619 " Fail: %s w/tag %d [%s].\n", 620 fis->command == ATA_CMD_FPDMA_WRITE ? 621 "write" : "read", 622 tag, 623 fail_reason != NULL ? 624 fail_reason : "unknown"); 625 mtip_complete_command(cmd, BLK_STS_MEDIUM); 626 continue; 627 } 628 } 629 630 /* 631 * First check if this command has 632 * exceeded its retries. 633 */ 634 if (reissue && (cmd->retries-- > 0)) { 635 636 set_bit(tag, tagaccum); 637 638 /* Re-issue the command. */ 639 mtip_issue_ncq_command(port, tag); 640 641 continue; 642 } 643 644 /* Retire a command that will not be reissued */ 645 dev_warn(&port->dd->pdev->dev, 646 "retiring tag %d\n", tag); 647 648 mtip_complete_command(cmd, BLK_STS_IOERR); 649 } 650 } 651 print_tags(dd, "reissued (TFE)", tagaccum, cmd_cnt); 652 } 653 654 /* 655 * Handle a set device bits interrupt 656 */ 657 static inline void mtip_workq_sdbfx(struct mtip_port *port, int group, 658 u32 completed) 659 { 660 struct driver_data *dd = port->dd; 661 int tag, bit; 662 struct mtip_cmd *command; 663 664 if (!completed) { 665 WARN_ON_ONCE(!completed); 666 return; 667 } 668 /* clear completed status register in the hardware.*/ 669 writel(completed, port->completed[group]); 670 671 /* Process completed commands. */ 672 for (bit = 0; (bit < 32) && completed; bit++) { 673 if (completed & 0x01) { 674 tag = (group << 5) | bit; 675 676 /* skip internal command slot. */ 677 if (unlikely(tag == MTIP_TAG_INTERNAL)) 678 continue; 679 680 command = mtip_cmd_from_tag(dd, tag); 681 mtip_complete_command(command, 0); 682 } 683 completed >>= 1; 684 } 685 686 /* If last, re-enable interrupts */ 687 if (atomic_dec_return(&dd->irq_workers_active) == 0) 688 writel(0xffffffff, dd->mmio + HOST_IRQ_STAT); 689 } 690 691 /* 692 * Process legacy pio and d2h interrupts 693 */ 694 static inline void mtip_process_legacy(struct driver_data *dd, u32 port_stat) 695 { 696 struct mtip_port *port = dd->port; 697 struct mtip_cmd *cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL); 698 699 if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) && cmd) { 700 int group = MTIP_TAG_INDEX(MTIP_TAG_INTERNAL); 701 int status = readl(port->cmd_issue[group]); 702 703 if (!(status & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL)))) 704 mtip_complete_command(cmd, 0); 705 } 706 } 707 708 /* 709 * Demux and handle errors 710 */ 711 static inline void mtip_process_errors(struct driver_data *dd, u32 port_stat) 712 { 713 if (unlikely(port_stat & PORT_IRQ_CONNECT)) { 714 dev_warn(&dd->pdev->dev, 715 "Clearing PxSERR.DIAG.x\n"); 716 writel((1 << 26), dd->port->mmio + PORT_SCR_ERR); 717 } 718 719 if (unlikely(port_stat & PORT_IRQ_PHYRDY)) { 720 dev_warn(&dd->pdev->dev, 721 "Clearing PxSERR.DIAG.n\n"); 722 writel((1 << 16), dd->port->mmio + PORT_SCR_ERR); 723 } 724 725 if (unlikely(port_stat & ~PORT_IRQ_HANDLED)) { 726 dev_warn(&dd->pdev->dev, 727 "Port stat errors %x unhandled\n", 728 (port_stat & ~PORT_IRQ_HANDLED)); 729 if (mtip_check_surprise_removal(dd)) 730 return; 731 } 732 if (likely(port_stat & (PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR))) { 733 set_bit(MTIP_PF_EH_ACTIVE_BIT, &dd->port->flags); 734 wake_up_interruptible(&dd->port->svc_wait); 735 } 736 } 737 738 static inline irqreturn_t mtip_handle_irq(struct driver_data *data) 739 { 740 struct driver_data *dd = (struct driver_data *) data; 741 struct mtip_port *port = dd->port; 742 u32 hba_stat, port_stat; 743 int rv = IRQ_NONE; 744 int do_irq_enable = 1, i, workers; 745 struct mtip_work *twork; 746 747 hba_stat = readl(dd->mmio + HOST_IRQ_STAT); 748 if (hba_stat) { 749 rv = IRQ_HANDLED; 750 751 /* Acknowledge the interrupt status on the port.*/ 752 port_stat = readl(port->mmio + PORT_IRQ_STAT); 753 if (unlikely(port_stat == 0xFFFFFFFF)) { 754 mtip_check_surprise_removal(dd); 755 return IRQ_HANDLED; 756 } 757 writel(port_stat, port->mmio + PORT_IRQ_STAT); 758 759 /* Demux port status */ 760 if (likely(port_stat & PORT_IRQ_SDB_FIS)) { 761 do_irq_enable = 0; 762 WARN_ON_ONCE(atomic_read(&dd->irq_workers_active) != 0); 763 764 /* Start at 1: group zero is always local? */ 765 for (i = 0, workers = 0; i < MTIP_MAX_SLOT_GROUPS; 766 i++) { 767 twork = &dd->work[i]; 768 twork->completed = readl(port->completed[i]); 769 if (twork->completed) 770 workers++; 771 } 772 773 atomic_set(&dd->irq_workers_active, workers); 774 if (workers) { 775 for (i = 1; i < MTIP_MAX_SLOT_GROUPS; i++) { 776 twork = &dd->work[i]; 777 if (twork->completed) 778 queue_work_on( 779 twork->cpu_binding, 780 dd->isr_workq, 781 &twork->work); 782 } 783 784 if (likely(dd->work[0].completed)) 785 mtip_workq_sdbfx(port, 0, 786 dd->work[0].completed); 787 788 } else { 789 /* 790 * Chip quirk: SDB interrupt but nothing 791 * to complete 792 */ 793 do_irq_enable = 1; 794 } 795 } 796 797 if (unlikely(port_stat & PORT_IRQ_ERR)) { 798 if (unlikely(mtip_check_surprise_removal(dd))) { 799 /* don't proceed further */ 800 return IRQ_HANDLED; 801 } 802 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, 803 &dd->dd_flag)) 804 return rv; 805 806 mtip_process_errors(dd, port_stat & PORT_IRQ_ERR); 807 } 808 809 if (unlikely(port_stat & PORT_IRQ_LEGACY)) 810 mtip_process_legacy(dd, port_stat & PORT_IRQ_LEGACY); 811 } 812 813 /* acknowledge interrupt */ 814 if (unlikely(do_irq_enable)) 815 writel(hba_stat, dd->mmio + HOST_IRQ_STAT); 816 817 return rv; 818 } 819 820 /* 821 * HBA interrupt subroutine. 822 * 823 * @irq IRQ number. 824 * @instance Pointer to the driver data structure. 825 * 826 * return value 827 * IRQ_HANDLED A HBA interrupt was pending and handled. 828 * IRQ_NONE This interrupt was not for the HBA. 829 */ 830 static irqreturn_t mtip_irq_handler(int irq, void *instance) 831 { 832 struct driver_data *dd = instance; 833 834 return mtip_handle_irq(dd); 835 } 836 837 static void mtip_issue_non_ncq_command(struct mtip_port *port, int tag) 838 { 839 writel(1 << MTIP_TAG_BIT(tag), port->cmd_issue[MTIP_TAG_INDEX(tag)]); 840 } 841 842 static bool mtip_pause_ncq(struct mtip_port *port, 843 struct host_to_dev_fis *fis) 844 { 845 unsigned long task_file_data; 846 847 task_file_data = readl(port->mmio+PORT_TFDATA); 848 if ((task_file_data & 1)) 849 return false; 850 851 if (fis->command == ATA_CMD_SEC_ERASE_PREP) { 852 port->ic_pause_timer = jiffies; 853 return true; 854 } else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) && 855 (fis->features == 0x03)) { 856 set_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); 857 port->ic_pause_timer = jiffies; 858 return true; 859 } else if ((fis->command == ATA_CMD_SEC_ERASE_UNIT) || 860 ((fis->command == 0xFC) && 861 (fis->features == 0x27 || fis->features == 0x72 || 862 fis->features == 0x62 || fis->features == 0x26))) { 863 clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); 864 clear_bit(MTIP_DDF_REBUILD_FAILED_BIT, &port->dd->dd_flag); 865 /* Com reset after secure erase or lowlevel format */ 866 mtip_restart_port(port); 867 clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); 868 return false; 869 } 870 871 return false; 872 } 873 874 static bool mtip_commands_active(struct mtip_port *port) 875 { 876 unsigned int active; 877 unsigned int n; 878 879 /* 880 * Ignore s_active bit 0 of array element 0. 881 * This bit will always be set 882 */ 883 active = readl(port->s_active[0]) & 0xFFFFFFFE; 884 for (n = 1; n < port->dd->slot_groups; n++) 885 active |= readl(port->s_active[n]); 886 887 return active != 0; 888 } 889 890 /* 891 * Wait for port to quiesce 892 * 893 * @port Pointer to port data structure 894 * @timeout Max duration to wait (ms) 895 * 896 * return value 897 * 0 Success 898 * -EBUSY Commands still active 899 */ 900 static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout) 901 { 902 unsigned long to; 903 bool active = true; 904 905 blk_mq_quiesce_queue(port->dd->queue); 906 907 to = jiffies + msecs_to_jiffies(timeout); 908 do { 909 if (test_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags) && 910 test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) { 911 msleep(20); 912 continue; /* svc thd is actively issuing commands */ 913 } 914 915 msleep(100); 916 917 if (mtip_check_surprise_removal(port->dd)) 918 goto err_fault; 919 920 active = mtip_commands_active(port); 921 if (!active) 922 break; 923 } while (time_before(jiffies, to)); 924 925 blk_mq_unquiesce_queue(port->dd->queue); 926 return active ? -EBUSY : 0; 927 err_fault: 928 blk_mq_unquiesce_queue(port->dd->queue); 929 return -EFAULT; 930 } 931 932 struct mtip_int_cmd { 933 int fis_len; 934 dma_addr_t buffer; 935 int buf_len; 936 u32 opts; 937 }; 938 939 /* 940 * Execute an internal command and wait for the completion. 941 * 942 * @port Pointer to the port data structure. 943 * @fis Pointer to the FIS that describes the command. 944 * @fis_len Length in WORDS of the FIS. 945 * @buffer DMA accessible for command data. 946 * @buf_len Length, in bytes, of the data buffer. 947 * @opts Command header options, excluding the FIS length 948 * and the number of PRD entries. 949 * @timeout Time in ms to wait for the command to complete. 950 * 951 * return value 952 * 0 Command completed successfully. 953 * -EFAULT The buffer address is not correctly aligned. 954 * -EBUSY Internal command or other IO in progress. 955 * -EAGAIN Time out waiting for command to complete. 956 */ 957 static int mtip_exec_internal_command(struct mtip_port *port, 958 struct host_to_dev_fis *fis, 959 int fis_len, 960 dma_addr_t buffer, 961 int buf_len, 962 u32 opts, 963 unsigned long timeout) 964 { 965 struct mtip_cmd *int_cmd; 966 struct driver_data *dd = port->dd; 967 struct request *rq; 968 struct mtip_int_cmd icmd = { 969 .fis_len = fis_len, 970 .buffer = buffer, 971 .buf_len = buf_len, 972 .opts = opts 973 }; 974 int rv = 0; 975 976 /* Make sure the buffer is 8 byte aligned. This is asic specific. */ 977 if (buffer & 0x00000007) { 978 dev_err(&dd->pdev->dev, "SG buffer is not 8 byte aligned\n"); 979 return -EFAULT; 980 } 981 982 if (mtip_check_surprise_removal(dd)) 983 return -EFAULT; 984 985 rq = blk_mq_alloc_request(dd->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_RESERVED); 986 if (IS_ERR(rq)) { 987 dbg_printk(MTIP_DRV_NAME "Unable to allocate tag for PIO cmd\n"); 988 return -EFAULT; 989 } 990 991 set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); 992 993 if (fis->command == ATA_CMD_SEC_ERASE_PREP) 994 set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); 995 996 clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); 997 998 if (fis->command != ATA_CMD_STANDBYNOW1) { 999 /* wait for io to complete if non atomic */ 1000 if (mtip_quiesce_io(port, MTIP_QUIESCE_IO_TIMEOUT_MS) < 0) { 1001 dev_warn(&dd->pdev->dev, "Failed to quiesce IO\n"); 1002 blk_mq_free_request(rq); 1003 clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); 1004 wake_up_interruptible(&port->svc_wait); 1005 return -EBUSY; 1006 } 1007 } 1008 1009 /* Copy the command to the command table */ 1010 int_cmd = blk_mq_rq_to_pdu(rq); 1011 int_cmd->icmd = &icmd; 1012 memcpy(int_cmd->command, fis, fis_len*4); 1013 1014 rq->timeout = timeout; 1015 1016 /* insert request and run queue */ 1017 blk_execute_rq(rq, true); 1018 1019 if (int_cmd->status) { 1020 dev_err(&dd->pdev->dev, "Internal command [%02X] failed %d\n", 1021 fis->command, int_cmd->status); 1022 rv = -EIO; 1023 1024 if (mtip_check_surprise_removal(dd) || 1025 test_bit(MTIP_DDF_REMOVE_PENDING_BIT, 1026 &dd->dd_flag)) { 1027 dev_err(&dd->pdev->dev, 1028 "Internal command [%02X] wait returned due to SR\n", 1029 fis->command); 1030 rv = -ENXIO; 1031 goto exec_ic_exit; 1032 } 1033 mtip_device_reset(dd); /* recover from timeout issue */ 1034 rv = -EAGAIN; 1035 goto exec_ic_exit; 1036 } 1037 1038 if (readl(port->cmd_issue[MTIP_TAG_INDEX(MTIP_TAG_INTERNAL)]) 1039 & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL))) { 1040 rv = -ENXIO; 1041 if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { 1042 mtip_device_reset(dd); 1043 rv = -EAGAIN; 1044 } 1045 } 1046 exec_ic_exit: 1047 /* Clear the allocated and active bits for the internal command. */ 1048 blk_mq_free_request(rq); 1049 clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); 1050 if (rv >= 0 && mtip_pause_ncq(port, fis)) { 1051 /* NCQ paused */ 1052 return rv; 1053 } 1054 wake_up_interruptible(&port->svc_wait); 1055 1056 return rv; 1057 } 1058 1059 /* 1060 * Byte-swap ATA ID strings. 1061 * 1062 * ATA identify data contains strings in byte-swapped 16-bit words. 1063 * They must be swapped (on all architectures) to be usable as C strings. 1064 * This function swaps bytes in-place. 1065 * 1066 * @buf The buffer location of the string 1067 * @len The number of bytes to swap 1068 * 1069 * return value 1070 * None 1071 */ 1072 static inline void ata_swap_string(u16 *buf, unsigned int len) 1073 { 1074 int i; 1075 for (i = 0; i < (len/2); i++) 1076 be16_to_cpus(&buf[i]); 1077 } 1078 1079 static void mtip_set_timeout(struct driver_data *dd, 1080 struct host_to_dev_fis *fis, 1081 unsigned int *timeout, u8 erasemode) 1082 { 1083 switch (fis->command) { 1084 case ATA_CMD_DOWNLOAD_MICRO: 1085 *timeout = 120000; /* 2 minutes */ 1086 break; 1087 case ATA_CMD_SEC_ERASE_UNIT: 1088 case 0xFC: 1089 if (erasemode) 1090 *timeout = ((*(dd->port->identify + 90) * 2) * 60000); 1091 else 1092 *timeout = ((*(dd->port->identify + 89) * 2) * 60000); 1093 break; 1094 case ATA_CMD_STANDBYNOW1: 1095 *timeout = 120000; /* 2 minutes */ 1096 break; 1097 case 0xF7: 1098 case 0xFA: 1099 *timeout = 60000; /* 60 seconds */ 1100 break; 1101 case ATA_CMD_SMART: 1102 *timeout = 15000; /* 15 seconds */ 1103 break; 1104 default: 1105 *timeout = MTIP_IOCTL_CMD_TIMEOUT_MS; 1106 break; 1107 } 1108 } 1109 1110 /* 1111 * Request the device identity information. 1112 * 1113 * If a user space buffer is not specified, i.e. is NULL, the 1114 * identify information is still read from the drive and placed 1115 * into the identify data buffer (@e port->identify) in the 1116 * port data structure. 1117 * When the identify buffer contains valid identify information @e 1118 * port->identify_valid is non-zero. 1119 * 1120 * @port Pointer to the port structure. 1121 * @user_buffer A user space buffer where the identify data should be 1122 * copied. 1123 * 1124 * return value 1125 * 0 Command completed successfully. 1126 * -EFAULT An error occurred while coping data to the user buffer. 1127 * -1 Command failed. 1128 */ 1129 static int mtip_get_identify(struct mtip_port *port, void __user *user_buffer) 1130 { 1131 int rv = 0; 1132 struct host_to_dev_fis fis; 1133 1134 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) 1135 return -EFAULT; 1136 1137 /* Build the FIS. */ 1138 memset(&fis, 0, sizeof(struct host_to_dev_fis)); 1139 fis.type = 0x27; 1140 fis.opts = 1 << 7; 1141 fis.command = ATA_CMD_ID_ATA; 1142 1143 /* Set the identify information as invalid. */ 1144 port->identify_valid = 0; 1145 1146 /* Clear the identify information. */ 1147 memset(port->identify, 0, sizeof(u16) * ATA_ID_WORDS); 1148 1149 /* Execute the command. */ 1150 if (mtip_exec_internal_command(port, 1151 &fis, 1152 5, 1153 port->identify_dma, 1154 sizeof(u16) * ATA_ID_WORDS, 1155 0, 1156 MTIP_INT_CMD_TIMEOUT_MS) 1157 < 0) { 1158 rv = -1; 1159 goto out; 1160 } 1161 1162 /* 1163 * Perform any necessary byte-swapping. Yes, the kernel does in fact 1164 * perform field-sensitive swapping on the string fields. 1165 * See the kernel use of ata_id_string() for proof of this. 1166 */ 1167 #ifdef __LITTLE_ENDIAN 1168 ata_swap_string(port->identify + 27, 40); /* model string*/ 1169 ata_swap_string(port->identify + 23, 8); /* firmware string*/ 1170 ata_swap_string(port->identify + 10, 20); /* serial# string*/ 1171 #else 1172 { 1173 int i; 1174 for (i = 0; i < ATA_ID_WORDS; i++) 1175 port->identify[i] = le16_to_cpu(port->identify[i]); 1176 } 1177 #endif 1178 1179 /* Check security locked state */ 1180 if (port->identify[128] & 0x4) 1181 set_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); 1182 else 1183 clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); 1184 1185 /* Set the identify buffer as valid. */ 1186 port->identify_valid = 1; 1187 1188 if (user_buffer) { 1189 if (copy_to_user( 1190 user_buffer, 1191 port->identify, 1192 ATA_ID_WORDS * sizeof(u16))) { 1193 rv = -EFAULT; 1194 goto out; 1195 } 1196 } 1197 1198 out: 1199 return rv; 1200 } 1201 1202 /* 1203 * Issue a standby immediate command to the device. 1204 * 1205 * @port Pointer to the port structure. 1206 * 1207 * return value 1208 * 0 Command was executed successfully. 1209 * -1 An error occurred while executing the command. 1210 */ 1211 static int mtip_standby_immediate(struct mtip_port *port) 1212 { 1213 int rv; 1214 struct host_to_dev_fis fis; 1215 unsigned long __maybe_unused start; 1216 unsigned int timeout; 1217 1218 /* Build the FIS. */ 1219 memset(&fis, 0, sizeof(struct host_to_dev_fis)); 1220 fis.type = 0x27; 1221 fis.opts = 1 << 7; 1222 fis.command = ATA_CMD_STANDBYNOW1; 1223 1224 mtip_set_timeout(port->dd, &fis, &timeout, 0); 1225 1226 start = jiffies; 1227 rv = mtip_exec_internal_command(port, 1228 &fis, 1229 5, 1230 0, 1231 0, 1232 0, 1233 timeout); 1234 dbg_printk(MTIP_DRV_NAME "Time taken to complete standby cmd: %d ms\n", 1235 jiffies_to_msecs(jiffies - start)); 1236 if (rv) 1237 dev_warn(&port->dd->pdev->dev, 1238 "STANDBY IMMEDIATE command failed.\n"); 1239 1240 return rv; 1241 } 1242 1243 /* 1244 * Issue a READ LOG EXT command to the device. 1245 * 1246 * @port pointer to the port structure. 1247 * @page page number to fetch 1248 * @buffer pointer to buffer 1249 * @buffer_dma dma address corresponding to @buffer 1250 * @sectors page length to fetch, in sectors 1251 * 1252 * return value 1253 * @rv return value from mtip_exec_internal_command() 1254 */ 1255 static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer, 1256 dma_addr_t buffer_dma, unsigned int sectors) 1257 { 1258 struct host_to_dev_fis fis; 1259 1260 memset(&fis, 0, sizeof(struct host_to_dev_fis)); 1261 fis.type = 0x27; 1262 fis.opts = 1 << 7; 1263 fis.command = ATA_CMD_READ_LOG_EXT; 1264 fis.sect_count = sectors & 0xFF; 1265 fis.sect_cnt_ex = (sectors >> 8) & 0xFF; 1266 fis.lba_low = page; 1267 fis.lba_mid = 0; 1268 fis.device = ATA_DEVICE_OBS; 1269 1270 memset(buffer, 0, sectors * ATA_SECT_SIZE); 1271 1272 return mtip_exec_internal_command(port, 1273 &fis, 1274 5, 1275 buffer_dma, 1276 sectors * ATA_SECT_SIZE, 1277 0, 1278 MTIP_INT_CMD_TIMEOUT_MS); 1279 } 1280 1281 /* 1282 * Issue a SMART READ DATA command to the device. 1283 * 1284 * @port pointer to the port structure. 1285 * @buffer pointer to buffer 1286 * @buffer_dma dma address corresponding to @buffer 1287 * 1288 * return value 1289 * @rv return value from mtip_exec_internal_command() 1290 */ 1291 static int mtip_get_smart_data(struct mtip_port *port, u8 *buffer, 1292 dma_addr_t buffer_dma) 1293 { 1294 struct host_to_dev_fis fis; 1295 1296 memset(&fis, 0, sizeof(struct host_to_dev_fis)); 1297 fis.type = 0x27; 1298 fis.opts = 1 << 7; 1299 fis.command = ATA_CMD_SMART; 1300 fis.features = 0xD0; 1301 fis.sect_count = 1; 1302 fis.lba_mid = 0x4F; 1303 fis.lba_hi = 0xC2; 1304 fis.device = ATA_DEVICE_OBS; 1305 1306 return mtip_exec_internal_command(port, 1307 &fis, 1308 5, 1309 buffer_dma, 1310 ATA_SECT_SIZE, 1311 0, 1312 15000); 1313 } 1314 1315 /* 1316 * Get the value of a smart attribute 1317 * 1318 * @port pointer to the port structure 1319 * @id attribute number 1320 * @attrib pointer to return attrib information corresponding to @id 1321 * 1322 * return value 1323 * -EINVAL NULL buffer passed or unsupported attribute @id. 1324 * -EPERM Identify data not valid, SMART not supported or not enabled 1325 */ 1326 static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, 1327 struct smart_attr *attrib) 1328 { 1329 int rv, i; 1330 struct smart_attr *pattr; 1331 1332 if (!attrib) 1333 return -EINVAL; 1334 1335 if (!port->identify_valid) { 1336 dev_warn(&port->dd->pdev->dev, "IDENTIFY DATA not valid\n"); 1337 return -EPERM; 1338 } 1339 if (!(port->identify[82] & 0x1)) { 1340 dev_warn(&port->dd->pdev->dev, "SMART not supported\n"); 1341 return -EPERM; 1342 } 1343 if (!(port->identify[85] & 0x1)) { 1344 dev_warn(&port->dd->pdev->dev, "SMART not enabled\n"); 1345 return -EPERM; 1346 } 1347 1348 memset(port->smart_buf, 0, ATA_SECT_SIZE); 1349 rv = mtip_get_smart_data(port, port->smart_buf, port->smart_buf_dma); 1350 if (rv) { 1351 dev_warn(&port->dd->pdev->dev, "Failed to ge SMART data\n"); 1352 return rv; 1353 } 1354 1355 pattr = (struct smart_attr *)(port->smart_buf + 2); 1356 for (i = 0; i < 29; i++, pattr++) 1357 if (pattr->attr_id == id) { 1358 memcpy(attrib, pattr, sizeof(struct smart_attr)); 1359 break; 1360 } 1361 1362 if (i == 29) { 1363 dev_warn(&port->dd->pdev->dev, 1364 "Query for invalid SMART attribute ID\n"); 1365 rv = -EINVAL; 1366 } 1367 1368 return rv; 1369 } 1370 1371 /* 1372 * Get the drive capacity. 1373 * 1374 * @dd Pointer to the device data structure. 1375 * @sectors Pointer to the variable that will receive the sector count. 1376 * 1377 * return value 1378 * 1 Capacity was returned successfully. 1379 * 0 The identify information is invalid. 1380 */ 1381 static bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors) 1382 { 1383 struct mtip_port *port = dd->port; 1384 u64 total, raw0, raw1, raw2, raw3; 1385 raw0 = port->identify[100]; 1386 raw1 = port->identify[101]; 1387 raw2 = port->identify[102]; 1388 raw3 = port->identify[103]; 1389 total = raw0 | raw1<<16 | raw2<<32 | raw3<<48; 1390 *sectors = total; 1391 return (bool) !!port->identify_valid; 1392 } 1393 1394 /* 1395 * Display the identify command data. 1396 * 1397 * @port Pointer to the port data structure. 1398 * 1399 * return value 1400 * None 1401 */ 1402 static void mtip_dump_identify(struct mtip_port *port) 1403 { 1404 sector_t sectors; 1405 unsigned short revid; 1406 char cbuf[42]; 1407 1408 if (!port->identify_valid) 1409 return; 1410 1411 strlcpy(cbuf, (char *)(port->identify+10), 21); 1412 dev_info(&port->dd->pdev->dev, 1413 "Serial No.: %s\n", cbuf); 1414 1415 strlcpy(cbuf, (char *)(port->identify+23), 9); 1416 dev_info(&port->dd->pdev->dev, 1417 "Firmware Ver.: %s\n", cbuf); 1418 1419 strlcpy(cbuf, (char *)(port->identify+27), 41); 1420 dev_info(&port->dd->pdev->dev, "Model: %s\n", cbuf); 1421 1422 dev_info(&port->dd->pdev->dev, "Security: %04x %s\n", 1423 port->identify[128], 1424 port->identify[128] & 0x4 ? "(LOCKED)" : ""); 1425 1426 if (mtip_hw_get_capacity(port->dd, §ors)) 1427 dev_info(&port->dd->pdev->dev, 1428 "Capacity: %llu sectors (%llu MB)\n", 1429 (u64)sectors, 1430 ((u64)sectors) * ATA_SECT_SIZE >> 20); 1431 1432 pci_read_config_word(port->dd->pdev, PCI_REVISION_ID, &revid); 1433 switch (revid & 0xFF) { 1434 case 0x1: 1435 strlcpy(cbuf, "A0", 3); 1436 break; 1437 case 0x3: 1438 strlcpy(cbuf, "A2", 3); 1439 break; 1440 default: 1441 strlcpy(cbuf, "?", 2); 1442 break; 1443 } 1444 dev_info(&port->dd->pdev->dev, 1445 "Card Type: %s\n", cbuf); 1446 } 1447 1448 /* 1449 * Map the commands scatter list into the command table. 1450 * 1451 * @command Pointer to the command. 1452 * @nents Number of scatter list entries. 1453 * 1454 * return value 1455 * None 1456 */ 1457 static inline void fill_command_sg(struct driver_data *dd, 1458 struct mtip_cmd *command, 1459 int nents) 1460 { 1461 int n; 1462 unsigned int dma_len; 1463 struct mtip_cmd_sg *command_sg; 1464 struct scatterlist *sg; 1465 1466 command_sg = command->command + AHCI_CMD_TBL_HDR_SZ; 1467 1468 for_each_sg(command->sg, sg, nents, n) { 1469 dma_len = sg_dma_len(sg); 1470 if (dma_len > 0x400000) 1471 dev_err(&dd->pdev->dev, 1472 "DMA segment length truncated\n"); 1473 command_sg->info = cpu_to_le32((dma_len-1) & 0x3FFFFF); 1474 command_sg->dba = cpu_to_le32(sg_dma_address(sg)); 1475 command_sg->dba_upper = 1476 cpu_to_le32((sg_dma_address(sg) >> 16) >> 16); 1477 command_sg++; 1478 } 1479 } 1480 1481 /* 1482 * @brief Execute a drive command. 1483 * 1484 * return value 0 The command completed successfully. 1485 * return value -1 An error occurred while executing the command. 1486 */ 1487 static int exec_drive_task(struct mtip_port *port, u8 *command) 1488 { 1489 struct host_to_dev_fis fis; 1490 struct host_to_dev_fis *reply = (port->rxfis + RX_FIS_D2H_REG); 1491 unsigned int to; 1492 1493 /* Build the FIS. */ 1494 memset(&fis, 0, sizeof(struct host_to_dev_fis)); 1495 fis.type = 0x27; 1496 fis.opts = 1 << 7; 1497 fis.command = command[0]; 1498 fis.features = command[1]; 1499 fis.sect_count = command[2]; 1500 fis.sector = command[3]; 1501 fis.cyl_low = command[4]; 1502 fis.cyl_hi = command[5]; 1503 fis.device = command[6] & ~0x10; /* Clear the dev bit*/ 1504 1505 mtip_set_timeout(port->dd, &fis, &to, 0); 1506 1507 dbg_printk(MTIP_DRV_NAME " %s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n", 1508 __func__, 1509 command[0], 1510 command[1], 1511 command[2], 1512 command[3], 1513 command[4], 1514 command[5], 1515 command[6]); 1516 1517 /* Execute the command. */ 1518 if (mtip_exec_internal_command(port, 1519 &fis, 1520 5, 1521 0, 1522 0, 1523 0, 1524 to) < 0) { 1525 return -1; 1526 } 1527 1528 command[0] = reply->command; /* Status*/ 1529 command[1] = reply->features; /* Error*/ 1530 command[4] = reply->cyl_low; 1531 command[5] = reply->cyl_hi; 1532 1533 dbg_printk(MTIP_DRV_NAME " %s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n", 1534 __func__, 1535 command[0], 1536 command[1], 1537 command[4], 1538 command[5]); 1539 1540 return 0; 1541 } 1542 1543 /* 1544 * @brief Execute a drive command. 1545 * 1546 * @param port Pointer to the port data structure. 1547 * @param command Pointer to the user specified command parameters. 1548 * @param user_buffer Pointer to the user space buffer where read sector 1549 * data should be copied. 1550 * 1551 * return value 0 The command completed successfully. 1552 * return value -EFAULT An error occurred while copying the completion 1553 * data to the user space buffer. 1554 * return value -1 An error occurred while executing the command. 1555 */ 1556 static int exec_drive_command(struct mtip_port *port, u8 *command, 1557 void __user *user_buffer) 1558 { 1559 struct host_to_dev_fis fis; 1560 struct host_to_dev_fis *reply; 1561 u8 *buf = NULL; 1562 dma_addr_t dma_addr = 0; 1563 int rv = 0, xfer_sz = command[3]; 1564 unsigned int to; 1565 1566 if (xfer_sz) { 1567 if (!user_buffer) 1568 return -EFAULT; 1569 1570 buf = dma_alloc_coherent(&port->dd->pdev->dev, 1571 ATA_SECT_SIZE * xfer_sz, 1572 &dma_addr, 1573 GFP_KERNEL); 1574 if (!buf) { 1575 dev_err(&port->dd->pdev->dev, 1576 "Memory allocation failed (%d bytes)\n", 1577 ATA_SECT_SIZE * xfer_sz); 1578 return -ENOMEM; 1579 } 1580 } 1581 1582 /* Build the FIS. */ 1583 memset(&fis, 0, sizeof(struct host_to_dev_fis)); 1584 fis.type = 0x27; 1585 fis.opts = 1 << 7; 1586 fis.command = command[0]; 1587 fis.features = command[2]; 1588 fis.sect_count = command[3]; 1589 if (fis.command == ATA_CMD_SMART) { 1590 fis.sector = command[1]; 1591 fis.cyl_low = 0x4F; 1592 fis.cyl_hi = 0xC2; 1593 } 1594 1595 mtip_set_timeout(port->dd, &fis, &to, 0); 1596 1597 if (xfer_sz) 1598 reply = (port->rxfis + RX_FIS_PIO_SETUP); 1599 else 1600 reply = (port->rxfis + RX_FIS_D2H_REG); 1601 1602 dbg_printk(MTIP_DRV_NAME 1603 " %s: User Command: cmd %x, sect %x, " 1604 "feat %x, sectcnt %x\n", 1605 __func__, 1606 command[0], 1607 command[1], 1608 command[2], 1609 command[3]); 1610 1611 /* Execute the command. */ 1612 if (mtip_exec_internal_command(port, 1613 &fis, 1614 5, 1615 (xfer_sz ? dma_addr : 0), 1616 (xfer_sz ? ATA_SECT_SIZE * xfer_sz : 0), 1617 0, 1618 to) 1619 < 0) { 1620 rv = -EFAULT; 1621 goto exit_drive_command; 1622 } 1623 1624 /* Collect the completion status. */ 1625 command[0] = reply->command; /* Status*/ 1626 command[1] = reply->features; /* Error*/ 1627 command[2] = reply->sect_count; 1628 1629 dbg_printk(MTIP_DRV_NAME 1630 " %s: Completion Status: stat %x, " 1631 "err %x, nsect %x\n", 1632 __func__, 1633 command[0], 1634 command[1], 1635 command[2]); 1636 1637 if (xfer_sz) { 1638 if (copy_to_user(user_buffer, 1639 buf, 1640 ATA_SECT_SIZE * command[3])) { 1641 rv = -EFAULT; 1642 goto exit_drive_command; 1643 } 1644 } 1645 exit_drive_command: 1646 if (buf) 1647 dma_free_coherent(&port->dd->pdev->dev, 1648 ATA_SECT_SIZE * xfer_sz, buf, dma_addr); 1649 return rv; 1650 } 1651 1652 /* 1653 * Indicates whether a command has a single sector payload. 1654 * 1655 * @command passed to the device to perform the certain event. 1656 * @features passed to the device to perform the certain event. 1657 * 1658 * return value 1659 * 1 command is one that always has a single sector payload, 1660 * regardless of the value in the Sector Count field. 1661 * 0 otherwise 1662 * 1663 */ 1664 static unsigned int implicit_sector(unsigned char command, 1665 unsigned char features) 1666 { 1667 unsigned int rv = 0; 1668 1669 /* list of commands that have an implicit sector count of 1 */ 1670 switch (command) { 1671 case ATA_CMD_SEC_SET_PASS: 1672 case ATA_CMD_SEC_UNLOCK: 1673 case ATA_CMD_SEC_ERASE_PREP: 1674 case ATA_CMD_SEC_ERASE_UNIT: 1675 case ATA_CMD_SEC_FREEZE_LOCK: 1676 case ATA_CMD_SEC_DISABLE_PASS: 1677 case ATA_CMD_PMP_READ: 1678 case ATA_CMD_PMP_WRITE: 1679 rv = 1; 1680 break; 1681 case ATA_CMD_SET_MAX: 1682 if (features == ATA_SET_MAX_UNLOCK) 1683 rv = 1; 1684 break; 1685 case ATA_CMD_SMART: 1686 if ((features == ATA_SMART_READ_VALUES) || 1687 (features == ATA_SMART_READ_THRESHOLDS)) 1688 rv = 1; 1689 break; 1690 case ATA_CMD_CONF_OVERLAY: 1691 if ((features == ATA_DCO_IDENTIFY) || 1692 (features == ATA_DCO_SET)) 1693 rv = 1; 1694 break; 1695 } 1696 return rv; 1697 } 1698 1699 /* 1700 * Executes a taskfile 1701 * See ide_taskfile_ioctl() for derivation 1702 */ 1703 static int exec_drive_taskfile(struct driver_data *dd, 1704 void __user *buf, 1705 ide_task_request_t *req_task, 1706 int outtotal) 1707 { 1708 struct host_to_dev_fis fis; 1709 struct host_to_dev_fis *reply; 1710 u8 *outbuf = NULL; 1711 u8 *inbuf = NULL; 1712 dma_addr_t outbuf_dma = 0; 1713 dma_addr_t inbuf_dma = 0; 1714 dma_addr_t dma_buffer = 0; 1715 int err = 0; 1716 unsigned int taskin = 0; 1717 unsigned int taskout = 0; 1718 u8 nsect = 0; 1719 unsigned int timeout; 1720 unsigned int force_single_sector; 1721 unsigned int transfer_size; 1722 unsigned long task_file_data; 1723 int intotal = outtotal + req_task->out_size; 1724 int erasemode = 0; 1725 1726 taskout = req_task->out_size; 1727 taskin = req_task->in_size; 1728 /* 130560 = 512 * 0xFF*/ 1729 if (taskin > 130560 || taskout > 130560) 1730 return -EINVAL; 1731 1732 if (taskout) { 1733 outbuf = memdup_user(buf + outtotal, taskout); 1734 if (IS_ERR(outbuf)) 1735 return PTR_ERR(outbuf); 1736 1737 outbuf_dma = dma_map_single(&dd->pdev->dev, outbuf, 1738 taskout, DMA_TO_DEVICE); 1739 if (dma_mapping_error(&dd->pdev->dev, outbuf_dma)) { 1740 err = -ENOMEM; 1741 goto abort; 1742 } 1743 dma_buffer = outbuf_dma; 1744 } 1745 1746 if (taskin) { 1747 inbuf = memdup_user(buf + intotal, taskin); 1748 if (IS_ERR(inbuf)) { 1749 err = PTR_ERR(inbuf); 1750 inbuf = NULL; 1751 goto abort; 1752 } 1753 inbuf_dma = dma_map_single(&dd->pdev->dev, inbuf, 1754 taskin, DMA_FROM_DEVICE); 1755 if (dma_mapping_error(&dd->pdev->dev, inbuf_dma)) { 1756 err = -ENOMEM; 1757 goto abort; 1758 } 1759 dma_buffer = inbuf_dma; 1760 } 1761 1762 /* only supports PIO and non-data commands from this ioctl. */ 1763 switch (req_task->data_phase) { 1764 case TASKFILE_OUT: 1765 nsect = taskout / ATA_SECT_SIZE; 1766 reply = (dd->port->rxfis + RX_FIS_PIO_SETUP); 1767 break; 1768 case TASKFILE_IN: 1769 reply = (dd->port->rxfis + RX_FIS_PIO_SETUP); 1770 break; 1771 case TASKFILE_NO_DATA: 1772 reply = (dd->port->rxfis + RX_FIS_D2H_REG); 1773 break; 1774 default: 1775 err = -EINVAL; 1776 goto abort; 1777 } 1778 1779 /* Build the FIS. */ 1780 memset(&fis, 0, sizeof(struct host_to_dev_fis)); 1781 1782 fis.type = 0x27; 1783 fis.opts = 1 << 7; 1784 fis.command = req_task->io_ports[7]; 1785 fis.features = req_task->io_ports[1]; 1786 fis.sect_count = req_task->io_ports[2]; 1787 fis.lba_low = req_task->io_ports[3]; 1788 fis.lba_mid = req_task->io_ports[4]; 1789 fis.lba_hi = req_task->io_ports[5]; 1790 /* Clear the dev bit*/ 1791 fis.device = req_task->io_ports[6] & ~0x10; 1792 1793 if ((req_task->in_flags.all == 0) && (req_task->out_flags.all & 1)) { 1794 req_task->in_flags.all = 1795 IDE_TASKFILE_STD_IN_FLAGS | 1796 (IDE_HOB_STD_IN_FLAGS << 8); 1797 fis.lba_low_ex = req_task->hob_ports[3]; 1798 fis.lba_mid_ex = req_task->hob_ports[4]; 1799 fis.lba_hi_ex = req_task->hob_ports[5]; 1800 fis.features_ex = req_task->hob_ports[1]; 1801 fis.sect_cnt_ex = req_task->hob_ports[2]; 1802 1803 } else { 1804 req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; 1805 } 1806 1807 force_single_sector = implicit_sector(fis.command, fis.features); 1808 1809 if ((taskin || taskout) && (!fis.sect_count)) { 1810 if (nsect) 1811 fis.sect_count = nsect; 1812 else { 1813 if (!force_single_sector) { 1814 dev_warn(&dd->pdev->dev, 1815 "data movement but " 1816 "sect_count is 0\n"); 1817 err = -EINVAL; 1818 goto abort; 1819 } 1820 } 1821 } 1822 1823 dbg_printk(MTIP_DRV_NAME 1824 " %s: cmd %x, feat %x, nsect %x," 1825 " sect/lbal %x, lcyl/lbam %x, hcyl/lbah %x," 1826 " head/dev %x\n", 1827 __func__, 1828 fis.command, 1829 fis.features, 1830 fis.sect_count, 1831 fis.lba_low, 1832 fis.lba_mid, 1833 fis.lba_hi, 1834 fis.device); 1835 1836 /* check for erase mode support during secure erase.*/ 1837 if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf && 1838 (outbuf[0] & MTIP_SEC_ERASE_MODE)) { 1839 erasemode = 1; 1840 } 1841 1842 mtip_set_timeout(dd, &fis, &timeout, erasemode); 1843 1844 /* Determine the correct transfer size.*/ 1845 if (force_single_sector) 1846 transfer_size = ATA_SECT_SIZE; 1847 else 1848 transfer_size = ATA_SECT_SIZE * fis.sect_count; 1849 1850 /* Execute the command.*/ 1851 if (mtip_exec_internal_command(dd->port, 1852 &fis, 1853 5, 1854 dma_buffer, 1855 transfer_size, 1856 0, 1857 timeout) < 0) { 1858 err = -EIO; 1859 goto abort; 1860 } 1861 1862 task_file_data = readl(dd->port->mmio+PORT_TFDATA); 1863 1864 if ((req_task->data_phase == TASKFILE_IN) && !(task_file_data & 1)) { 1865 reply = dd->port->rxfis + RX_FIS_PIO_SETUP; 1866 req_task->io_ports[7] = reply->control; 1867 } else { 1868 reply = dd->port->rxfis + RX_FIS_D2H_REG; 1869 req_task->io_ports[7] = reply->command; 1870 } 1871 1872 /* reclaim the DMA buffers.*/ 1873 if (inbuf_dma) 1874 dma_unmap_single(&dd->pdev->dev, inbuf_dma, taskin, 1875 DMA_FROM_DEVICE); 1876 if (outbuf_dma) 1877 dma_unmap_single(&dd->pdev->dev, outbuf_dma, taskout, 1878 DMA_TO_DEVICE); 1879 inbuf_dma = 0; 1880 outbuf_dma = 0; 1881 1882 /* return the ATA registers to the caller.*/ 1883 req_task->io_ports[1] = reply->features; 1884 req_task->io_ports[2] = reply->sect_count; 1885 req_task->io_ports[3] = reply->lba_low; 1886 req_task->io_ports[4] = reply->lba_mid; 1887 req_task->io_ports[5] = reply->lba_hi; 1888 req_task->io_ports[6] = reply->device; 1889 1890 if (req_task->out_flags.all & 1) { 1891 1892 req_task->hob_ports[3] = reply->lba_low_ex; 1893 req_task->hob_ports[4] = reply->lba_mid_ex; 1894 req_task->hob_ports[5] = reply->lba_hi_ex; 1895 req_task->hob_ports[1] = reply->features_ex; 1896 req_task->hob_ports[2] = reply->sect_cnt_ex; 1897 } 1898 dbg_printk(MTIP_DRV_NAME 1899 " %s: Completion: stat %x," 1900 "err %x, sect_cnt %x, lbalo %x," 1901 "lbamid %x, lbahi %x, dev %x\n", 1902 __func__, 1903 req_task->io_ports[7], 1904 req_task->io_ports[1], 1905 req_task->io_ports[2], 1906 req_task->io_ports[3], 1907 req_task->io_ports[4], 1908 req_task->io_ports[5], 1909 req_task->io_ports[6]); 1910 1911 if (taskout) { 1912 if (copy_to_user(buf + outtotal, outbuf, taskout)) { 1913 err = -EFAULT; 1914 goto abort; 1915 } 1916 } 1917 if (taskin) { 1918 if (copy_to_user(buf + intotal, inbuf, taskin)) { 1919 err = -EFAULT; 1920 goto abort; 1921 } 1922 } 1923 abort: 1924 if (inbuf_dma) 1925 dma_unmap_single(&dd->pdev->dev, inbuf_dma, taskin, 1926 DMA_FROM_DEVICE); 1927 if (outbuf_dma) 1928 dma_unmap_single(&dd->pdev->dev, outbuf_dma, taskout, 1929 DMA_TO_DEVICE); 1930 kfree(outbuf); 1931 kfree(inbuf); 1932 1933 return err; 1934 } 1935 1936 /* 1937 * Handle IOCTL calls from the Block Layer. 1938 * 1939 * This function is called by the Block Layer when it receives an IOCTL 1940 * command that it does not understand. If the IOCTL command is not supported 1941 * this function returns -ENOTTY. 1942 * 1943 * @dd Pointer to the driver data structure. 1944 * @cmd IOCTL command passed from the Block Layer. 1945 * @arg IOCTL argument passed from the Block Layer. 1946 * 1947 * return value 1948 * 0 The IOCTL completed successfully. 1949 * -ENOTTY The specified command is not supported. 1950 * -EFAULT An error occurred copying data to a user space buffer. 1951 * -EIO An error occurred while executing the command. 1952 */ 1953 static int mtip_hw_ioctl(struct driver_data *dd, unsigned int cmd, 1954 unsigned long arg) 1955 { 1956 switch (cmd) { 1957 case HDIO_GET_IDENTITY: 1958 { 1959 if (copy_to_user((void __user *)arg, dd->port->identify, 1960 sizeof(u16) * ATA_ID_WORDS)) 1961 return -EFAULT; 1962 break; 1963 } 1964 case HDIO_DRIVE_CMD: 1965 { 1966 u8 drive_command[4]; 1967 1968 /* Copy the user command info to our buffer. */ 1969 if (copy_from_user(drive_command, 1970 (void __user *) arg, 1971 sizeof(drive_command))) 1972 return -EFAULT; 1973 1974 /* Execute the drive command. */ 1975 if (exec_drive_command(dd->port, 1976 drive_command, 1977 (void __user *) (arg+4))) 1978 return -EIO; 1979 1980 /* Copy the status back to the users buffer. */ 1981 if (copy_to_user((void __user *) arg, 1982 drive_command, 1983 sizeof(drive_command))) 1984 return -EFAULT; 1985 1986 break; 1987 } 1988 case HDIO_DRIVE_TASK: 1989 { 1990 u8 drive_command[7]; 1991 1992 /* Copy the user command info to our buffer. */ 1993 if (copy_from_user(drive_command, 1994 (void __user *) arg, 1995 sizeof(drive_command))) 1996 return -EFAULT; 1997 1998 /* Execute the drive command. */ 1999 if (exec_drive_task(dd->port, drive_command)) 2000 return -EIO; 2001 2002 /* Copy the status back to the users buffer. */ 2003 if (copy_to_user((void __user *) arg, 2004 drive_command, 2005 sizeof(drive_command))) 2006 return -EFAULT; 2007 2008 break; 2009 } 2010 case HDIO_DRIVE_TASKFILE: { 2011 ide_task_request_t req_task; 2012 int ret, outtotal; 2013 2014 if (copy_from_user(&req_task, (void __user *) arg, 2015 sizeof(req_task))) 2016 return -EFAULT; 2017 2018 outtotal = sizeof(req_task); 2019 2020 ret = exec_drive_taskfile(dd, (void __user *) arg, 2021 &req_task, outtotal); 2022 2023 if (copy_to_user((void __user *) arg, &req_task, 2024 sizeof(req_task))) 2025 return -EFAULT; 2026 2027 return ret; 2028 } 2029 2030 default: 2031 return -EINVAL; 2032 } 2033 return 0; 2034 } 2035 2036 /* 2037 * Submit an IO to the hw 2038 * 2039 * This function is called by the block layer to issue an io 2040 * to the device. Upon completion, the callback function will 2041 * be called with the data parameter passed as the callback data. 2042 * 2043 * @dd Pointer to the driver data structure. 2044 * @start First sector to read. 2045 * @nsect Number of sectors to read. 2046 * @tag The tag of this read command. 2047 * @callback Pointer to the function that should be called 2048 * when the read completes. 2049 * @data Callback data passed to the callback function 2050 * when the read completes. 2051 * @dir Direction (read or write) 2052 * 2053 * return value 2054 * None 2055 */ 2056 static void mtip_hw_submit_io(struct driver_data *dd, struct request *rq, 2057 struct mtip_cmd *command, 2058 struct blk_mq_hw_ctx *hctx) 2059 { 2060 struct mtip_cmd_hdr *hdr = 2061 dd->port->command_list + sizeof(struct mtip_cmd_hdr) * rq->tag; 2062 struct host_to_dev_fis *fis; 2063 struct mtip_port *port = dd->port; 2064 int dma_dir = rq_data_dir(rq) == READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE; 2065 u64 start = blk_rq_pos(rq); 2066 unsigned int nsect = blk_rq_sectors(rq); 2067 unsigned int nents; 2068 2069 /* Map the scatter list for DMA access */ 2070 nents = blk_rq_map_sg(hctx->queue, rq, command->sg); 2071 nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir); 2072 2073 prefetch(&port->flags); 2074 2075 command->scatter_ents = nents; 2076 2077 /* 2078 * The number of retries for this command before it is 2079 * reported as a failure to the upper layers. 2080 */ 2081 command->retries = MTIP_MAX_RETRIES; 2082 2083 /* Fill out fis */ 2084 fis = command->command; 2085 fis->type = 0x27; 2086 fis->opts = 1 << 7; 2087 if (dma_dir == DMA_FROM_DEVICE) 2088 fis->command = ATA_CMD_FPDMA_READ; 2089 else 2090 fis->command = ATA_CMD_FPDMA_WRITE; 2091 fis->lba_low = start & 0xFF; 2092 fis->lba_mid = (start >> 8) & 0xFF; 2093 fis->lba_hi = (start >> 16) & 0xFF; 2094 fis->lba_low_ex = (start >> 24) & 0xFF; 2095 fis->lba_mid_ex = (start >> 32) & 0xFF; 2096 fis->lba_hi_ex = (start >> 40) & 0xFF; 2097 fis->device = 1 << 6; 2098 fis->features = nsect & 0xFF; 2099 fis->features_ex = (nsect >> 8) & 0xFF; 2100 fis->sect_count = ((rq->tag << 3) | (rq->tag >> 5)); 2101 fis->sect_cnt_ex = 0; 2102 fis->control = 0; 2103 fis->res2 = 0; 2104 fis->res3 = 0; 2105 fill_command_sg(dd, command, nents); 2106 2107 if (unlikely(command->unaligned)) 2108 fis->device |= 1 << 7; 2109 2110 /* Populate the command header */ 2111 hdr->ctba = cpu_to_le32(command->command_dma & 0xFFFFFFFF); 2112 if (test_bit(MTIP_PF_HOST_CAP_64, &dd->port->flags)) 2113 hdr->ctbau = cpu_to_le32((command->command_dma >> 16) >> 16); 2114 hdr->opts = cpu_to_le32((nents << 16) | 5 | AHCI_CMD_PREFETCH); 2115 hdr->byte_count = 0; 2116 2117 command->direction = dma_dir; 2118 2119 /* 2120 * To prevent this command from being issued 2121 * if an internal command is in progress or error handling is active. 2122 */ 2123 if (unlikely(port->flags & MTIP_PF_PAUSE_IO)) { 2124 set_bit(rq->tag, port->cmds_to_issue); 2125 set_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags); 2126 return; 2127 } 2128 2129 /* Issue the command to the hardware */ 2130 mtip_issue_ncq_command(port, rq->tag); 2131 } 2132 2133 /* 2134 * Sysfs status dump. 2135 * 2136 * @dev Pointer to the device structure, passed by the kernrel. 2137 * @attr Pointer to the device_attribute structure passed by the kernel. 2138 * @buf Pointer to the char buffer that will receive the stats info. 2139 * 2140 * return value 2141 * The size, in bytes, of the data copied into buf. 2142 */ 2143 static ssize_t mtip_hw_show_status(struct device *dev, 2144 struct device_attribute *attr, 2145 char *buf) 2146 { 2147 struct driver_data *dd = dev_to_disk(dev)->private_data; 2148 int size = 0; 2149 2150 if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag)) 2151 size += sprintf(buf, "%s", "thermal_shutdown\n"); 2152 else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag)) 2153 size += sprintf(buf, "%s", "write_protect\n"); 2154 else 2155 size += sprintf(buf, "%s", "online\n"); 2156 2157 return size; 2158 } 2159 2160 static DEVICE_ATTR(status, 0444, mtip_hw_show_status, NULL); 2161 2162 static struct attribute *mtip_disk_attrs[] = { 2163 &dev_attr_status.attr, 2164 NULL, 2165 }; 2166 2167 static const struct attribute_group mtip_disk_attr_group = { 2168 .attrs = mtip_disk_attrs, 2169 }; 2170 2171 static const struct attribute_group *mtip_disk_attr_groups[] = { 2172 &mtip_disk_attr_group, 2173 NULL, 2174 }; 2175 2176 /* debugsfs entries */ 2177 2178 static ssize_t show_device_status(struct device_driver *drv, char *buf) 2179 { 2180 int size = 0; 2181 struct driver_data *dd, *tmp; 2182 unsigned long flags; 2183 char id_buf[42]; 2184 u16 status = 0; 2185 2186 spin_lock_irqsave(&dev_lock, flags); 2187 size += sprintf(&buf[size], "Devices Present:\n"); 2188 list_for_each_entry_safe(dd, tmp, &online_list, online_list) { 2189 if (dd->pdev) { 2190 if (dd->port && 2191 dd->port->identify && 2192 dd->port->identify_valid) { 2193 strlcpy(id_buf, 2194 (char *) (dd->port->identify + 10), 21); 2195 status = *(dd->port->identify + 141); 2196 } else { 2197 memset(id_buf, 0, 42); 2198 status = 0; 2199 } 2200 2201 if (dd->port && 2202 test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags)) { 2203 size += sprintf(&buf[size], 2204 " device %s %s (ftl rebuild %d %%)\n", 2205 dev_name(&dd->pdev->dev), 2206 id_buf, 2207 status); 2208 } else { 2209 size += sprintf(&buf[size], 2210 " device %s %s\n", 2211 dev_name(&dd->pdev->dev), 2212 id_buf); 2213 } 2214 } 2215 } 2216 2217 size += sprintf(&buf[size], "Devices Being Removed:\n"); 2218 list_for_each_entry_safe(dd, tmp, &removing_list, remove_list) { 2219 if (dd->pdev) { 2220 if (dd->port && 2221 dd->port->identify && 2222 dd->port->identify_valid) { 2223 strlcpy(id_buf, 2224 (char *) (dd->port->identify+10), 21); 2225 status = *(dd->port->identify + 141); 2226 } else { 2227 memset(id_buf, 0, 42); 2228 status = 0; 2229 } 2230 2231 if (dd->port && 2232 test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags)) { 2233 size += sprintf(&buf[size], 2234 " device %s %s (ftl rebuild %d %%)\n", 2235 dev_name(&dd->pdev->dev), 2236 id_buf, 2237 status); 2238 } else { 2239 size += sprintf(&buf[size], 2240 " device %s %s\n", 2241 dev_name(&dd->pdev->dev), 2242 id_buf); 2243 } 2244 } 2245 } 2246 spin_unlock_irqrestore(&dev_lock, flags); 2247 2248 return size; 2249 } 2250 2251 static ssize_t mtip_hw_read_device_status(struct file *f, char __user *ubuf, 2252 size_t len, loff_t *offset) 2253 { 2254 int size = *offset; 2255 char *buf; 2256 int rv = 0; 2257 2258 if (!len || *offset) 2259 return 0; 2260 2261 buf = kzalloc(MTIP_DFS_MAX_BUF_SIZE, GFP_KERNEL); 2262 if (!buf) 2263 return -ENOMEM; 2264 2265 size += show_device_status(NULL, buf); 2266 2267 *offset = size <= len ? size : len; 2268 size = copy_to_user(ubuf, buf, *offset); 2269 if (size) 2270 rv = -EFAULT; 2271 2272 kfree(buf); 2273 return rv ? rv : *offset; 2274 } 2275 2276 static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf, 2277 size_t len, loff_t *offset) 2278 { 2279 struct driver_data *dd = (struct driver_data *)f->private_data; 2280 char *buf; 2281 u32 group_allocated; 2282 int size = *offset; 2283 int n, rv = 0; 2284 2285 if (!len || size) 2286 return 0; 2287 2288 buf = kzalloc(MTIP_DFS_MAX_BUF_SIZE, GFP_KERNEL); 2289 if (!buf) 2290 return -ENOMEM; 2291 2292 size += sprintf(&buf[size], "H/ S ACTive : [ 0x"); 2293 2294 for (n = dd->slot_groups-1; n >= 0; n--) 2295 size += sprintf(&buf[size], "%08X ", 2296 readl(dd->port->s_active[n])); 2297 2298 size += sprintf(&buf[size], "]\n"); 2299 size += sprintf(&buf[size], "H/ Command Issue : [ 0x"); 2300 2301 for (n = dd->slot_groups-1; n >= 0; n--) 2302 size += sprintf(&buf[size], "%08X ", 2303 readl(dd->port->cmd_issue[n])); 2304 2305 size += sprintf(&buf[size], "]\n"); 2306 size += sprintf(&buf[size], "H/ Completed : [ 0x"); 2307 2308 for (n = dd->slot_groups-1; n >= 0; n--) 2309 size += sprintf(&buf[size], "%08X ", 2310 readl(dd->port->completed[n])); 2311 2312 size += sprintf(&buf[size], "]\n"); 2313 size += sprintf(&buf[size], "H/ PORT IRQ STAT : [ 0x%08X ]\n", 2314 readl(dd->port->mmio + PORT_IRQ_STAT)); 2315 size += sprintf(&buf[size], "H/ HOST IRQ STAT : [ 0x%08X ]\n", 2316 readl(dd->mmio + HOST_IRQ_STAT)); 2317 size += sprintf(&buf[size], "\n"); 2318 2319 size += sprintf(&buf[size], "L/ Commands in Q : [ 0x"); 2320 2321 for (n = dd->slot_groups-1; n >= 0; n--) { 2322 if (sizeof(long) > sizeof(u32)) 2323 group_allocated = 2324 dd->port->cmds_to_issue[n/2] >> (32*(n&1)); 2325 else 2326 group_allocated = dd->port->cmds_to_issue[n]; 2327 size += sprintf(&buf[size], "%08X ", group_allocated); 2328 } 2329 size += sprintf(&buf[size], "]\n"); 2330 2331 *offset = size <= len ? size : len; 2332 size = copy_to_user(ubuf, buf, *offset); 2333 if (size) 2334 rv = -EFAULT; 2335 2336 kfree(buf); 2337 return rv ? rv : *offset; 2338 } 2339 2340 static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf, 2341 size_t len, loff_t *offset) 2342 { 2343 struct driver_data *dd = (struct driver_data *)f->private_data; 2344 char *buf; 2345 int size = *offset; 2346 int rv = 0; 2347 2348 if (!len || size) 2349 return 0; 2350 2351 buf = kzalloc(MTIP_DFS_MAX_BUF_SIZE, GFP_KERNEL); 2352 if (!buf) 2353 return -ENOMEM; 2354 2355 size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n", 2356 dd->port->flags); 2357 size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n", 2358 dd->dd_flag); 2359 2360 *offset = size <= len ? size : len; 2361 size = copy_to_user(ubuf, buf, *offset); 2362 if (size) 2363 rv = -EFAULT; 2364 2365 kfree(buf); 2366 return rv ? rv : *offset; 2367 } 2368 2369 static const struct file_operations mtip_device_status_fops = { 2370 .owner = THIS_MODULE, 2371 .open = simple_open, 2372 .read = mtip_hw_read_device_status, 2373 .llseek = no_llseek, 2374 }; 2375 2376 static const struct file_operations mtip_regs_fops = { 2377 .owner = THIS_MODULE, 2378 .open = simple_open, 2379 .read = mtip_hw_read_registers, 2380 .llseek = no_llseek, 2381 }; 2382 2383 static const struct file_operations mtip_flags_fops = { 2384 .owner = THIS_MODULE, 2385 .open = simple_open, 2386 .read = mtip_hw_read_flags, 2387 .llseek = no_llseek, 2388 }; 2389 2390 static int mtip_hw_debugfs_init(struct driver_data *dd) 2391 { 2392 if (!dfs_parent) 2393 return -1; 2394 2395 dd->dfs_node = debugfs_create_dir(dd->disk->disk_name, dfs_parent); 2396 if (IS_ERR_OR_NULL(dd->dfs_node)) { 2397 dev_warn(&dd->pdev->dev, 2398 "Error creating node %s under debugfs\n", 2399 dd->disk->disk_name); 2400 dd->dfs_node = NULL; 2401 return -1; 2402 } 2403 2404 debugfs_create_file("flags", 0444, dd->dfs_node, dd, &mtip_flags_fops); 2405 debugfs_create_file("registers", 0444, dd->dfs_node, dd, 2406 &mtip_regs_fops); 2407 2408 return 0; 2409 } 2410 2411 static void mtip_hw_debugfs_exit(struct driver_data *dd) 2412 { 2413 debugfs_remove_recursive(dd->dfs_node); 2414 } 2415 2416 /* 2417 * Perform any init/resume time hardware setup 2418 * 2419 * @dd Pointer to the driver data structure. 2420 * 2421 * return value 2422 * None 2423 */ 2424 static inline void hba_setup(struct driver_data *dd) 2425 { 2426 u32 hwdata; 2427 hwdata = readl(dd->mmio + HOST_HSORG); 2428 2429 /* interrupt bug workaround: use only 1 IS bit.*/ 2430 writel(hwdata | 2431 HSORG_DISABLE_SLOTGRP_INTR | 2432 HSORG_DISABLE_SLOTGRP_PXIS, 2433 dd->mmio + HOST_HSORG); 2434 } 2435 2436 static int mtip_device_unaligned_constrained(struct driver_data *dd) 2437 { 2438 return (dd->pdev->device == P420M_DEVICE_ID ? 1 : 0); 2439 } 2440 2441 /* 2442 * Detect the details of the product, and store anything needed 2443 * into the driver data structure. This includes product type and 2444 * version and number of slot groups. 2445 * 2446 * @dd Pointer to the driver data structure. 2447 * 2448 * return value 2449 * None 2450 */ 2451 static void mtip_detect_product(struct driver_data *dd) 2452 { 2453 u32 hwdata; 2454 unsigned int rev, slotgroups; 2455 2456 /* 2457 * HBA base + 0xFC [15:0] - vendor-specific hardware interface 2458 * info register: 2459 * [15:8] hardware/software interface rev# 2460 * [ 3] asic-style interface 2461 * [ 2:0] number of slot groups, minus 1 (only valid for asic-style). 2462 */ 2463 hwdata = readl(dd->mmio + HOST_HSORG); 2464 2465 dd->product_type = MTIP_PRODUCT_UNKNOWN; 2466 dd->slot_groups = 1; 2467 2468 if (hwdata & 0x8) { 2469 dd->product_type = MTIP_PRODUCT_ASICFPGA; 2470 rev = (hwdata & HSORG_HWREV) >> 8; 2471 slotgroups = (hwdata & HSORG_SLOTGROUPS) + 1; 2472 dev_info(&dd->pdev->dev, 2473 "ASIC-FPGA design, HS rev 0x%x, " 2474 "%i slot groups [%i slots]\n", 2475 rev, 2476 slotgroups, 2477 slotgroups * 32); 2478 2479 if (slotgroups > MTIP_MAX_SLOT_GROUPS) { 2480 dev_warn(&dd->pdev->dev, 2481 "Warning: driver only supports " 2482 "%i slot groups.\n", MTIP_MAX_SLOT_GROUPS); 2483 slotgroups = MTIP_MAX_SLOT_GROUPS; 2484 } 2485 dd->slot_groups = slotgroups; 2486 return; 2487 } 2488 2489 dev_warn(&dd->pdev->dev, "Unrecognized product id\n"); 2490 } 2491 2492 /* 2493 * Blocking wait for FTL rebuild to complete 2494 * 2495 * @dd Pointer to the DRIVER_DATA structure. 2496 * 2497 * return value 2498 * 0 FTL rebuild completed successfully 2499 * -EFAULT FTL rebuild error/timeout/interruption 2500 */ 2501 static int mtip_ftl_rebuild_poll(struct driver_data *dd) 2502 { 2503 unsigned long timeout, cnt = 0, start; 2504 2505 dev_warn(&dd->pdev->dev, 2506 "FTL rebuild in progress. Polling for completion.\n"); 2507 2508 start = jiffies; 2509 timeout = jiffies + msecs_to_jiffies(MTIP_FTL_REBUILD_TIMEOUT_MS); 2510 2511 do { 2512 if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, 2513 &dd->dd_flag))) 2514 return -EFAULT; 2515 if (mtip_check_surprise_removal(dd)) 2516 return -EFAULT; 2517 2518 if (mtip_get_identify(dd->port, NULL) < 0) 2519 return -EFAULT; 2520 2521 if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) == 2522 MTIP_FTL_REBUILD_MAGIC) { 2523 ssleep(1); 2524 /* Print message every 3 minutes */ 2525 if (cnt++ >= 180) { 2526 dev_warn(&dd->pdev->dev, 2527 "FTL rebuild in progress (%d secs).\n", 2528 jiffies_to_msecs(jiffies - start) / 1000); 2529 cnt = 0; 2530 } 2531 } else { 2532 dev_warn(&dd->pdev->dev, 2533 "FTL rebuild complete (%d secs).\n", 2534 jiffies_to_msecs(jiffies - start) / 1000); 2535 mtip_block_initialize(dd); 2536 return 0; 2537 } 2538 } while (time_before(jiffies, timeout)); 2539 2540 /* Check for timeout */ 2541 dev_err(&dd->pdev->dev, 2542 "Timed out waiting for FTL rebuild to complete (%d secs).\n", 2543 jiffies_to_msecs(jiffies - start) / 1000); 2544 return -EFAULT; 2545 } 2546 2547 static void mtip_softirq_done_fn(struct request *rq) 2548 { 2549 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); 2550 struct driver_data *dd = rq->q->queuedata; 2551 2552 /* Unmap the DMA scatter list entries */ 2553 dma_unmap_sg(&dd->pdev->dev, cmd->sg, cmd->scatter_ents, 2554 cmd->direction); 2555 2556 if (unlikely(cmd->unaligned)) 2557 atomic_inc(&dd->port->cmd_slot_unal); 2558 2559 blk_mq_end_request(rq, cmd->status); 2560 } 2561 2562 static bool mtip_abort_cmd(struct request *req, void *data, bool reserved) 2563 { 2564 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req); 2565 struct driver_data *dd = data; 2566 2567 dbg_printk(MTIP_DRV_NAME " Aborting request, tag = %d\n", req->tag); 2568 2569 clear_bit(req->tag, dd->port->cmds_to_issue); 2570 cmd->status = BLK_STS_IOERR; 2571 mtip_softirq_done_fn(req); 2572 return true; 2573 } 2574 2575 static bool mtip_queue_cmd(struct request *req, void *data, bool reserved) 2576 { 2577 struct driver_data *dd = data; 2578 2579 set_bit(req->tag, dd->port->cmds_to_issue); 2580 blk_abort_request(req); 2581 return true; 2582 } 2583 2584 /* 2585 * service thread to issue queued commands 2586 * 2587 * @data Pointer to the driver data structure. 2588 * 2589 * return value 2590 * 0 2591 */ 2592 2593 static int mtip_service_thread(void *data) 2594 { 2595 struct driver_data *dd = (struct driver_data *)data; 2596 unsigned long slot, slot_start, slot_wrap, to; 2597 unsigned int num_cmd_slots = dd->slot_groups * 32; 2598 struct mtip_port *port = dd->port; 2599 2600 while (1) { 2601 if (kthread_should_stop() || 2602 test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags)) 2603 goto st_out; 2604 clear_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags); 2605 2606 /* 2607 * the condition is to check neither an internal command is 2608 * is in progress nor error handling is active 2609 */ 2610 wait_event_interruptible(port->svc_wait, (port->flags) && 2611 (port->flags & MTIP_PF_SVC_THD_WORK)); 2612 2613 if (kthread_should_stop() || 2614 test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags)) 2615 goto st_out; 2616 2617 if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, 2618 &dd->dd_flag))) 2619 goto st_out; 2620 2621 set_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags); 2622 2623 restart_eh: 2624 /* Demux bits: start with error handling */ 2625 if (test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags)) { 2626 mtip_handle_tfe(dd); 2627 clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); 2628 } 2629 2630 if (test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags)) 2631 goto restart_eh; 2632 2633 if (test_bit(MTIP_PF_TO_ACTIVE_BIT, &port->flags)) { 2634 to = jiffies + msecs_to_jiffies(5000); 2635 2636 do { 2637 mdelay(100); 2638 } while (atomic_read(&dd->irq_workers_active) != 0 && 2639 time_before(jiffies, to)); 2640 2641 if (atomic_read(&dd->irq_workers_active) != 0) 2642 dev_warn(&dd->pdev->dev, 2643 "Completion workers still active!"); 2644 2645 blk_mq_quiesce_queue(dd->queue); 2646 2647 blk_mq_tagset_busy_iter(&dd->tags, mtip_queue_cmd, dd); 2648 2649 set_bit(MTIP_PF_ISSUE_CMDS_BIT, &dd->port->flags); 2650 2651 if (mtip_device_reset(dd)) 2652 blk_mq_tagset_busy_iter(&dd->tags, 2653 mtip_abort_cmd, dd); 2654 2655 clear_bit(MTIP_PF_TO_ACTIVE_BIT, &dd->port->flags); 2656 2657 blk_mq_unquiesce_queue(dd->queue); 2658 } 2659 2660 if (test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) { 2661 slot = 1; 2662 /* used to restrict the loop to one iteration */ 2663 slot_start = num_cmd_slots; 2664 slot_wrap = 0; 2665 while (1) { 2666 slot = find_next_bit(port->cmds_to_issue, 2667 num_cmd_slots, slot); 2668 if (slot_wrap == 1) { 2669 if ((slot_start >= slot) || 2670 (slot >= num_cmd_slots)) 2671 break; 2672 } 2673 if (unlikely(slot_start == num_cmd_slots)) 2674 slot_start = slot; 2675 2676 if (unlikely(slot == num_cmd_slots)) { 2677 slot = 1; 2678 slot_wrap = 1; 2679 continue; 2680 } 2681 2682 /* Issue the command to the hardware */ 2683 mtip_issue_ncq_command(port, slot); 2684 2685 clear_bit(slot, port->cmds_to_issue); 2686 } 2687 2688 clear_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags); 2689 } 2690 2691 if (test_bit(MTIP_PF_REBUILD_BIT, &port->flags)) { 2692 if (mtip_ftl_rebuild_poll(dd) == 0) 2693 clear_bit(MTIP_PF_REBUILD_BIT, &port->flags); 2694 } 2695 } 2696 2697 st_out: 2698 return 0; 2699 } 2700 2701 /* 2702 * DMA region teardown 2703 * 2704 * @dd Pointer to driver_data structure 2705 * 2706 * return value 2707 * None 2708 */ 2709 static void mtip_dma_free(struct driver_data *dd) 2710 { 2711 struct mtip_port *port = dd->port; 2712 2713 if (port->block1) 2714 dma_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ, 2715 port->block1, port->block1_dma); 2716 2717 if (port->command_list) { 2718 dma_free_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ, 2719 port->command_list, port->command_list_dma); 2720 } 2721 } 2722 2723 /* 2724 * DMA region setup 2725 * 2726 * @dd Pointer to driver_data structure 2727 * 2728 * return value 2729 * -ENOMEM Not enough free DMA region space to initialize driver 2730 */ 2731 static int mtip_dma_alloc(struct driver_data *dd) 2732 { 2733 struct mtip_port *port = dd->port; 2734 2735 /* Allocate dma memory for RX Fis, Identify, and Sector Bufffer */ 2736 port->block1 = 2737 dma_alloc_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ, 2738 &port->block1_dma, GFP_KERNEL); 2739 if (!port->block1) 2740 return -ENOMEM; 2741 2742 /* Allocate dma memory for command list */ 2743 port->command_list = 2744 dma_alloc_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ, 2745 &port->command_list_dma, GFP_KERNEL); 2746 if (!port->command_list) { 2747 dma_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ, 2748 port->block1, port->block1_dma); 2749 port->block1 = NULL; 2750 port->block1_dma = 0; 2751 return -ENOMEM; 2752 } 2753 2754 /* Setup all pointers into first DMA region */ 2755 port->rxfis = port->block1 + AHCI_RX_FIS_OFFSET; 2756 port->rxfis_dma = port->block1_dma + AHCI_RX_FIS_OFFSET; 2757 port->identify = port->block1 + AHCI_IDFY_OFFSET; 2758 port->identify_dma = port->block1_dma + AHCI_IDFY_OFFSET; 2759 port->log_buf = port->block1 + AHCI_SECTBUF_OFFSET; 2760 port->log_buf_dma = port->block1_dma + AHCI_SECTBUF_OFFSET; 2761 port->smart_buf = port->block1 + AHCI_SMARTBUF_OFFSET; 2762 port->smart_buf_dma = port->block1_dma + AHCI_SMARTBUF_OFFSET; 2763 2764 return 0; 2765 } 2766 2767 static int mtip_hw_get_identify(struct driver_data *dd) 2768 { 2769 struct smart_attr attr242; 2770 unsigned char *buf; 2771 int rv; 2772 2773 if (mtip_get_identify(dd->port, NULL) < 0) 2774 return -EFAULT; 2775 2776 if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) == 2777 MTIP_FTL_REBUILD_MAGIC) { 2778 set_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags); 2779 return MTIP_FTL_REBUILD_MAGIC; 2780 } 2781 mtip_dump_identify(dd->port); 2782 2783 /* check write protect, over temp and rebuild statuses */ 2784 rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ, 2785 dd->port->log_buf, 2786 dd->port->log_buf_dma, 1); 2787 if (rv) { 2788 dev_warn(&dd->pdev->dev, 2789 "Error in READ LOG EXT (10h) command\n"); 2790 /* non-critical error, don't fail the load */ 2791 } else { 2792 buf = (unsigned char *)dd->port->log_buf; 2793 if (buf[259] & 0x1) { 2794 dev_info(&dd->pdev->dev, 2795 "Write protect bit is set.\n"); 2796 set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag); 2797 } 2798 if (buf[288] == 0xF7) { 2799 dev_info(&dd->pdev->dev, 2800 "Exceeded Tmax, drive in thermal shutdown.\n"); 2801 set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag); 2802 } 2803 if (buf[288] == 0xBF) { 2804 dev_info(&dd->pdev->dev, 2805 "Drive indicates rebuild has failed.\n"); 2806 set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag); 2807 } 2808 } 2809 2810 /* get write protect progess */ 2811 memset(&attr242, 0, sizeof(struct smart_attr)); 2812 if (mtip_get_smart_attr(dd->port, 242, &attr242)) 2813 dev_warn(&dd->pdev->dev, 2814 "Unable to check write protect progress\n"); 2815 else 2816 dev_info(&dd->pdev->dev, 2817 "Write protect progress: %u%% (%u blocks)\n", 2818 attr242.cur, le32_to_cpu(attr242.data)); 2819 2820 return rv; 2821 } 2822 2823 /* 2824 * Called once for each card. 2825 * 2826 * @dd Pointer to the driver data structure. 2827 * 2828 * return value 2829 * 0 on success, else an error code. 2830 */ 2831 static int mtip_hw_init(struct driver_data *dd) 2832 { 2833 int i; 2834 int rv; 2835 unsigned long timeout, timetaken; 2836 2837 dd->mmio = pcim_iomap_table(dd->pdev)[MTIP_ABAR]; 2838 2839 mtip_detect_product(dd); 2840 if (dd->product_type == MTIP_PRODUCT_UNKNOWN) { 2841 rv = -EIO; 2842 goto out1; 2843 } 2844 2845 hba_setup(dd); 2846 2847 dd->port = kzalloc_node(sizeof(struct mtip_port), GFP_KERNEL, 2848 dd->numa_node); 2849 if (!dd->port) 2850 return -ENOMEM; 2851 2852 /* Continue workqueue setup */ 2853 for (i = 0; i < MTIP_MAX_SLOT_GROUPS; i++) 2854 dd->work[i].port = dd->port; 2855 2856 /* Enable unaligned IO constraints for some devices */ 2857 if (mtip_device_unaligned_constrained(dd)) 2858 dd->unal_qdepth = MTIP_MAX_UNALIGNED_SLOTS; 2859 else 2860 dd->unal_qdepth = 0; 2861 2862 atomic_set(&dd->port->cmd_slot_unal, dd->unal_qdepth); 2863 2864 /* Spinlock to prevent concurrent issue */ 2865 for (i = 0; i < MTIP_MAX_SLOT_GROUPS; i++) 2866 spin_lock_init(&dd->port->cmd_issue_lock[i]); 2867 2868 /* Set the port mmio base address. */ 2869 dd->port->mmio = dd->mmio + PORT_OFFSET; 2870 dd->port->dd = dd; 2871 2872 /* DMA allocations */ 2873 rv = mtip_dma_alloc(dd); 2874 if (rv < 0) 2875 goto out1; 2876 2877 /* Setup the pointers to the extended s_active and CI registers. */ 2878 for (i = 0; i < dd->slot_groups; i++) { 2879 dd->port->s_active[i] = 2880 dd->port->mmio + i*0x80 + PORT_SCR_ACT; 2881 dd->port->cmd_issue[i] = 2882 dd->port->mmio + i*0x80 + PORT_COMMAND_ISSUE; 2883 dd->port->completed[i] = 2884 dd->port->mmio + i*0x80 + PORT_SDBV; 2885 } 2886 2887 timetaken = jiffies; 2888 timeout = jiffies + msecs_to_jiffies(30000); 2889 while (((readl(dd->port->mmio + PORT_SCR_STAT) & 0x0F) != 0x03) && 2890 time_before(jiffies, timeout)) { 2891 mdelay(100); 2892 } 2893 if (unlikely(mtip_check_surprise_removal(dd))) { 2894 timetaken = jiffies - timetaken; 2895 dev_warn(&dd->pdev->dev, 2896 "Surprise removal detected at %u ms\n", 2897 jiffies_to_msecs(timetaken)); 2898 rv = -ENODEV; 2899 goto out2 ; 2900 } 2901 if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) { 2902 timetaken = jiffies - timetaken; 2903 dev_warn(&dd->pdev->dev, 2904 "Removal detected at %u ms\n", 2905 jiffies_to_msecs(timetaken)); 2906 rv = -EFAULT; 2907 goto out2; 2908 } 2909 2910 /* Conditionally reset the HBA. */ 2911 if (!(readl(dd->mmio + HOST_CAP) & HOST_CAP_NZDMA)) { 2912 if (mtip_hba_reset(dd) < 0) { 2913 dev_err(&dd->pdev->dev, 2914 "Card did not reset within timeout\n"); 2915 rv = -EIO; 2916 goto out2; 2917 } 2918 } else { 2919 /* Clear any pending interrupts on the HBA */ 2920 writel(readl(dd->mmio + HOST_IRQ_STAT), 2921 dd->mmio + HOST_IRQ_STAT); 2922 } 2923 2924 mtip_init_port(dd->port); 2925 mtip_start_port(dd->port); 2926 2927 /* Setup the ISR and enable interrupts. */ 2928 rv = request_irq(dd->pdev->irq, mtip_irq_handler, IRQF_SHARED, 2929 dev_driver_string(&dd->pdev->dev), dd); 2930 if (rv) { 2931 dev_err(&dd->pdev->dev, 2932 "Unable to allocate IRQ %d\n", dd->pdev->irq); 2933 goto out2; 2934 } 2935 irq_set_affinity_hint(dd->pdev->irq, get_cpu_mask(dd->isr_binding)); 2936 2937 /* Enable interrupts on the HBA. */ 2938 writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, 2939 dd->mmio + HOST_CTL); 2940 2941 init_waitqueue_head(&dd->port->svc_wait); 2942 2943 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { 2944 rv = -EFAULT; 2945 goto out3; 2946 } 2947 2948 return rv; 2949 2950 out3: 2951 /* Disable interrupts on the HBA. */ 2952 writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN, 2953 dd->mmio + HOST_CTL); 2954 2955 /* Release the IRQ. */ 2956 irq_set_affinity_hint(dd->pdev->irq, NULL); 2957 free_irq(dd->pdev->irq, dd); 2958 2959 out2: 2960 mtip_deinit_port(dd->port); 2961 mtip_dma_free(dd); 2962 2963 out1: 2964 /* Free the memory allocated for the for structure. */ 2965 kfree(dd->port); 2966 2967 return rv; 2968 } 2969 2970 static int mtip_standby_drive(struct driver_data *dd) 2971 { 2972 int rv = 0; 2973 2974 if (dd->sr || !dd->port) 2975 return -ENODEV; 2976 /* 2977 * Send standby immediate (E0h) to the drive so that it 2978 * saves its state. 2979 */ 2980 if (!test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags) && 2981 !test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag) && 2982 !test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag)) { 2983 rv = mtip_standby_immediate(dd->port); 2984 if (rv) 2985 dev_warn(&dd->pdev->dev, 2986 "STANDBY IMMEDIATE failed\n"); 2987 } 2988 return rv; 2989 } 2990 2991 /* 2992 * Called to deinitialize an interface. 2993 * 2994 * @dd Pointer to the driver data structure. 2995 * 2996 * return value 2997 * 0 2998 */ 2999 static int mtip_hw_exit(struct driver_data *dd) 3000 { 3001 if (!dd->sr) { 3002 /* de-initialize the port. */ 3003 mtip_deinit_port(dd->port); 3004 3005 /* Disable interrupts on the HBA. */ 3006 writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN, 3007 dd->mmio + HOST_CTL); 3008 } 3009 3010 /* Release the IRQ. */ 3011 irq_set_affinity_hint(dd->pdev->irq, NULL); 3012 free_irq(dd->pdev->irq, dd); 3013 msleep(1000); 3014 3015 /* Free dma regions */ 3016 mtip_dma_free(dd); 3017 3018 /* Free the memory allocated for the for structure. */ 3019 kfree(dd->port); 3020 dd->port = NULL; 3021 3022 return 0; 3023 } 3024 3025 /* 3026 * Issue a Standby Immediate command to the device. 3027 * 3028 * This function is called by the Block Layer just before the 3029 * system powers off during a shutdown. 3030 * 3031 * @dd Pointer to the driver data structure. 3032 * 3033 * return value 3034 * 0 3035 */ 3036 static int mtip_hw_shutdown(struct driver_data *dd) 3037 { 3038 /* 3039 * Send standby immediate (E0h) to the drive so that it 3040 * saves its state. 3041 */ 3042 mtip_standby_drive(dd); 3043 3044 return 0; 3045 } 3046 3047 /* 3048 * Suspend function 3049 * 3050 * This function is called by the Block Layer just before the 3051 * system hibernates. 3052 * 3053 * @dd Pointer to the driver data structure. 3054 * 3055 * return value 3056 * 0 Suspend was successful 3057 * -EFAULT Suspend was not successful 3058 */ 3059 static int mtip_hw_suspend(struct driver_data *dd) 3060 { 3061 /* 3062 * Send standby immediate (E0h) to the drive 3063 * so that it saves its state. 3064 */ 3065 if (mtip_standby_drive(dd) != 0) { 3066 dev_err(&dd->pdev->dev, 3067 "Failed standby-immediate command\n"); 3068 return -EFAULT; 3069 } 3070 3071 /* Disable interrupts on the HBA.*/ 3072 writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN, 3073 dd->mmio + HOST_CTL); 3074 mtip_deinit_port(dd->port); 3075 3076 return 0; 3077 } 3078 3079 /* 3080 * Resume function 3081 * 3082 * This function is called by the Block Layer as the 3083 * system resumes. 3084 * 3085 * @dd Pointer to the driver data structure. 3086 * 3087 * return value 3088 * 0 Resume was successful 3089 * -EFAULT Resume was not successful 3090 */ 3091 static int mtip_hw_resume(struct driver_data *dd) 3092 { 3093 /* Perform any needed hardware setup steps */ 3094 hba_setup(dd); 3095 3096 /* Reset the HBA */ 3097 if (mtip_hba_reset(dd) != 0) { 3098 dev_err(&dd->pdev->dev, 3099 "Unable to reset the HBA\n"); 3100 return -EFAULT; 3101 } 3102 3103 /* 3104 * Enable the port, DMA engine, and FIS reception specific 3105 * h/w in controller. 3106 */ 3107 mtip_init_port(dd->port); 3108 mtip_start_port(dd->port); 3109 3110 /* Enable interrupts on the HBA.*/ 3111 writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, 3112 dd->mmio + HOST_CTL); 3113 3114 return 0; 3115 } 3116 3117 /* 3118 * Helper function for reusing disk name 3119 * upon hot insertion. 3120 */ 3121 static int rssd_disk_name_format(char *prefix, 3122 int index, 3123 char *buf, 3124 int buflen) 3125 { 3126 const int base = 'z' - 'a' + 1; 3127 char *begin = buf + strlen(prefix); 3128 char *end = buf + buflen; 3129 char *p; 3130 int unit; 3131 3132 p = end - 1; 3133 *p = '\0'; 3134 unit = base; 3135 do { 3136 if (p == begin) 3137 return -EINVAL; 3138 *--p = 'a' + (index % unit); 3139 index = (index / unit) - 1; 3140 } while (index >= 0); 3141 3142 memmove(begin, p, end - p); 3143 memcpy(buf, prefix, strlen(prefix)); 3144 3145 return 0; 3146 } 3147 3148 /* 3149 * Block layer IOCTL handler. 3150 * 3151 * @dev Pointer to the block_device structure. 3152 * @mode ignored 3153 * @cmd IOCTL command passed from the user application. 3154 * @arg Argument passed from the user application. 3155 * 3156 * return value 3157 * 0 IOCTL completed successfully. 3158 * -ENOTTY IOCTL not supported or invalid driver data 3159 * structure pointer. 3160 */ 3161 static int mtip_block_ioctl(struct block_device *dev, 3162 fmode_t mode, 3163 unsigned cmd, 3164 unsigned long arg) 3165 { 3166 struct driver_data *dd = dev->bd_disk->private_data; 3167 3168 if (!capable(CAP_SYS_ADMIN)) 3169 return -EACCES; 3170 3171 if (!dd) 3172 return -ENOTTY; 3173 3174 if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) 3175 return -ENOTTY; 3176 3177 switch (cmd) { 3178 case BLKFLSBUF: 3179 return -ENOTTY; 3180 default: 3181 return mtip_hw_ioctl(dd, cmd, arg); 3182 } 3183 } 3184 3185 #ifdef CONFIG_COMPAT 3186 /* 3187 * Block layer compat IOCTL handler. 3188 * 3189 * @dev Pointer to the block_device structure. 3190 * @mode ignored 3191 * @cmd IOCTL command passed from the user application. 3192 * @arg Argument passed from the user application. 3193 * 3194 * return value 3195 * 0 IOCTL completed successfully. 3196 * -ENOTTY IOCTL not supported or invalid driver data 3197 * structure pointer. 3198 */ 3199 static int mtip_block_compat_ioctl(struct block_device *dev, 3200 fmode_t mode, 3201 unsigned cmd, 3202 unsigned long arg) 3203 { 3204 struct driver_data *dd = dev->bd_disk->private_data; 3205 3206 if (!capable(CAP_SYS_ADMIN)) 3207 return -EACCES; 3208 3209 if (!dd) 3210 return -ENOTTY; 3211 3212 if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) 3213 return -ENOTTY; 3214 3215 switch (cmd) { 3216 case BLKFLSBUF: 3217 return -ENOTTY; 3218 case HDIO_DRIVE_TASKFILE: { 3219 struct mtip_compat_ide_task_request_s __user *compat_req_task; 3220 ide_task_request_t req_task; 3221 int compat_tasksize, outtotal, ret; 3222 3223 compat_tasksize = 3224 sizeof(struct mtip_compat_ide_task_request_s); 3225 3226 compat_req_task = 3227 (struct mtip_compat_ide_task_request_s __user *) arg; 3228 3229 if (copy_from_user(&req_task, (void __user *) arg, 3230 compat_tasksize - (2 * sizeof(compat_long_t)))) 3231 return -EFAULT; 3232 3233 if (get_user(req_task.out_size, &compat_req_task->out_size)) 3234 return -EFAULT; 3235 3236 if (get_user(req_task.in_size, &compat_req_task->in_size)) 3237 return -EFAULT; 3238 3239 outtotal = sizeof(struct mtip_compat_ide_task_request_s); 3240 3241 ret = exec_drive_taskfile(dd, (void __user *) arg, 3242 &req_task, outtotal); 3243 3244 if (copy_to_user((void __user *) arg, &req_task, 3245 compat_tasksize - 3246 (2 * sizeof(compat_long_t)))) 3247 return -EFAULT; 3248 3249 if (put_user(req_task.out_size, &compat_req_task->out_size)) 3250 return -EFAULT; 3251 3252 if (put_user(req_task.in_size, &compat_req_task->in_size)) 3253 return -EFAULT; 3254 3255 return ret; 3256 } 3257 default: 3258 return mtip_hw_ioctl(dd, cmd, arg); 3259 } 3260 } 3261 #endif 3262 3263 /* 3264 * Obtain the geometry of the device. 3265 * 3266 * You may think that this function is obsolete, but some applications, 3267 * fdisk for example still used CHS values. This function describes the 3268 * device as having 224 heads and 56 sectors per cylinder. These values are 3269 * chosen so that each cylinder is aligned on a 4KB boundary. Since a 3270 * partition is described in terms of a start and end cylinder this means 3271 * that each partition is also 4KB aligned. Non-aligned partitions adversely 3272 * affects performance. 3273 * 3274 * @dev Pointer to the block_device strucutre. 3275 * @geo Pointer to a hd_geometry structure. 3276 * 3277 * return value 3278 * 0 Operation completed successfully. 3279 * -ENOTTY An error occurred while reading the drive capacity. 3280 */ 3281 static int mtip_block_getgeo(struct block_device *dev, 3282 struct hd_geometry *geo) 3283 { 3284 struct driver_data *dd = dev->bd_disk->private_data; 3285 sector_t capacity; 3286 3287 if (!dd) 3288 return -ENOTTY; 3289 3290 if (!(mtip_hw_get_capacity(dd, &capacity))) { 3291 dev_warn(&dd->pdev->dev, 3292 "Could not get drive capacity.\n"); 3293 return -ENOTTY; 3294 } 3295 3296 geo->heads = 224; 3297 geo->sectors = 56; 3298 sector_div(capacity, (geo->heads * geo->sectors)); 3299 geo->cylinders = capacity; 3300 return 0; 3301 } 3302 3303 static int mtip_block_open(struct block_device *dev, fmode_t mode) 3304 { 3305 struct driver_data *dd; 3306 3307 if (dev && dev->bd_disk) { 3308 dd = (struct driver_data *) dev->bd_disk->private_data; 3309 3310 if (dd) { 3311 if (test_bit(MTIP_DDF_REMOVAL_BIT, 3312 &dd->dd_flag)) { 3313 return -ENODEV; 3314 } 3315 return 0; 3316 } 3317 } 3318 return -ENODEV; 3319 } 3320 3321 static void mtip_block_release(struct gendisk *disk, fmode_t mode) 3322 { 3323 } 3324 3325 /* 3326 * Block device operation function. 3327 * 3328 * This structure contains pointers to the functions required by the block 3329 * layer. 3330 */ 3331 static const struct block_device_operations mtip_block_ops = { 3332 .open = mtip_block_open, 3333 .release = mtip_block_release, 3334 .ioctl = mtip_block_ioctl, 3335 #ifdef CONFIG_COMPAT 3336 .compat_ioctl = mtip_block_compat_ioctl, 3337 #endif 3338 .getgeo = mtip_block_getgeo, 3339 .owner = THIS_MODULE 3340 }; 3341 3342 static inline bool is_se_active(struct driver_data *dd) 3343 { 3344 if (unlikely(test_bit(MTIP_PF_SE_ACTIVE_BIT, &dd->port->flags))) { 3345 if (dd->port->ic_pause_timer) { 3346 unsigned long to = dd->port->ic_pause_timer + 3347 msecs_to_jiffies(1000); 3348 if (time_after(jiffies, to)) { 3349 clear_bit(MTIP_PF_SE_ACTIVE_BIT, 3350 &dd->port->flags); 3351 clear_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag); 3352 dd->port->ic_pause_timer = 0; 3353 wake_up_interruptible(&dd->port->svc_wait); 3354 return false; 3355 } 3356 } 3357 return true; 3358 } 3359 return false; 3360 } 3361 3362 static inline bool is_stopped(struct driver_data *dd, struct request *rq) 3363 { 3364 if (likely(!(dd->dd_flag & MTIP_DDF_STOP_IO))) 3365 return false; 3366 3367 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) 3368 return true; 3369 if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag)) 3370 return true; 3371 if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag) && 3372 rq_data_dir(rq)) 3373 return true; 3374 if (test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag)) 3375 return true; 3376 if (test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag)) 3377 return true; 3378 3379 return false; 3380 } 3381 3382 static bool mtip_check_unal_depth(struct blk_mq_hw_ctx *hctx, 3383 struct request *rq) 3384 { 3385 struct driver_data *dd = hctx->queue->queuedata; 3386 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); 3387 3388 if (rq_data_dir(rq) == READ || !dd->unal_qdepth) 3389 return false; 3390 3391 /* 3392 * If unaligned depth must be limited on this controller, mark it 3393 * as unaligned if the IO isn't on a 4k boundary (start of length). 3394 */ 3395 if (blk_rq_sectors(rq) <= 64) { 3396 if ((blk_rq_pos(rq) & 7) || (blk_rq_sectors(rq) & 7)) 3397 cmd->unaligned = 1; 3398 } 3399 3400 if (cmd->unaligned && atomic_dec_if_positive(&dd->port->cmd_slot_unal) >= 0) 3401 return true; 3402 3403 return false; 3404 } 3405 3406 static blk_status_t mtip_issue_reserved_cmd(struct blk_mq_hw_ctx *hctx, 3407 struct request *rq) 3408 { 3409 struct driver_data *dd = hctx->queue->queuedata; 3410 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); 3411 struct mtip_int_cmd *icmd = cmd->icmd; 3412 struct mtip_cmd_hdr *hdr = 3413 dd->port->command_list + sizeof(struct mtip_cmd_hdr) * rq->tag; 3414 struct mtip_cmd_sg *command_sg; 3415 3416 if (mtip_commands_active(dd->port)) 3417 return BLK_STS_DEV_RESOURCE; 3418 3419 hdr->ctba = cpu_to_le32(cmd->command_dma & 0xFFFFFFFF); 3420 if (test_bit(MTIP_PF_HOST_CAP_64, &dd->port->flags)) 3421 hdr->ctbau = cpu_to_le32((cmd->command_dma >> 16) >> 16); 3422 /* Populate the SG list */ 3423 hdr->opts = cpu_to_le32(icmd->opts | icmd->fis_len); 3424 if (icmd->buf_len) { 3425 command_sg = cmd->command + AHCI_CMD_TBL_HDR_SZ; 3426 3427 command_sg->info = cpu_to_le32((icmd->buf_len-1) & 0x3FFFFF); 3428 command_sg->dba = cpu_to_le32(icmd->buffer & 0xFFFFFFFF); 3429 command_sg->dba_upper = 3430 cpu_to_le32((icmd->buffer >> 16) >> 16); 3431 3432 hdr->opts |= cpu_to_le32((1 << 16)); 3433 } 3434 3435 /* Populate the command header */ 3436 hdr->byte_count = 0; 3437 3438 blk_mq_start_request(rq); 3439 mtip_issue_non_ncq_command(dd->port, rq->tag); 3440 return 0; 3441 } 3442 3443 static blk_status_t mtip_queue_rq(struct blk_mq_hw_ctx *hctx, 3444 const struct blk_mq_queue_data *bd) 3445 { 3446 struct driver_data *dd = hctx->queue->queuedata; 3447 struct request *rq = bd->rq; 3448 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); 3449 3450 if (blk_rq_is_passthrough(rq)) 3451 return mtip_issue_reserved_cmd(hctx, rq); 3452 3453 if (unlikely(mtip_check_unal_depth(hctx, rq))) 3454 return BLK_STS_DEV_RESOURCE; 3455 3456 if (is_se_active(dd) || is_stopped(dd, rq)) 3457 return BLK_STS_IOERR; 3458 3459 blk_mq_start_request(rq); 3460 3461 mtip_hw_submit_io(dd, rq, cmd, hctx); 3462 return BLK_STS_OK; 3463 } 3464 3465 static void mtip_free_cmd(struct blk_mq_tag_set *set, struct request *rq, 3466 unsigned int hctx_idx) 3467 { 3468 struct driver_data *dd = set->driver_data; 3469 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); 3470 3471 if (!cmd->command) 3472 return; 3473 3474 dma_free_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ, cmd->command, 3475 cmd->command_dma); 3476 } 3477 3478 static int mtip_init_cmd(struct blk_mq_tag_set *set, struct request *rq, 3479 unsigned int hctx_idx, unsigned int numa_node) 3480 { 3481 struct driver_data *dd = set->driver_data; 3482 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); 3483 3484 cmd->command = dma_alloc_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ, 3485 &cmd->command_dma, GFP_KERNEL); 3486 if (!cmd->command) 3487 return -ENOMEM; 3488 3489 sg_init_table(cmd->sg, MTIP_MAX_SG); 3490 return 0; 3491 } 3492 3493 static enum blk_eh_timer_return mtip_cmd_timeout(struct request *req, 3494 bool reserved) 3495 { 3496 struct driver_data *dd = req->q->queuedata; 3497 3498 if (reserved) { 3499 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req); 3500 3501 cmd->status = BLK_STS_TIMEOUT; 3502 blk_mq_complete_request(req); 3503 return BLK_EH_DONE; 3504 } 3505 3506 if (test_bit(req->tag, dd->port->cmds_to_issue)) 3507 goto exit_handler; 3508 3509 if (test_and_set_bit(MTIP_PF_TO_ACTIVE_BIT, &dd->port->flags)) 3510 goto exit_handler; 3511 3512 wake_up_interruptible(&dd->port->svc_wait); 3513 exit_handler: 3514 return BLK_EH_RESET_TIMER; 3515 } 3516 3517 static const struct blk_mq_ops mtip_mq_ops = { 3518 .queue_rq = mtip_queue_rq, 3519 .init_request = mtip_init_cmd, 3520 .exit_request = mtip_free_cmd, 3521 .complete = mtip_softirq_done_fn, 3522 .timeout = mtip_cmd_timeout, 3523 }; 3524 3525 /* 3526 * Block layer initialization function. 3527 * 3528 * This function is called once by the PCI layer for each P320 3529 * device that is connected to the system. 3530 * 3531 * @dd Pointer to the driver data structure. 3532 * 3533 * return value 3534 * 0 on success else an error code. 3535 */ 3536 static int mtip_block_initialize(struct driver_data *dd) 3537 { 3538 int rv = 0, wait_for_rebuild = 0; 3539 sector_t capacity; 3540 unsigned int index = 0; 3541 3542 if (dd->disk) 3543 goto skip_create_disk; /* hw init done, before rebuild */ 3544 3545 if (mtip_hw_init(dd)) { 3546 rv = -EINVAL; 3547 goto protocol_init_error; 3548 } 3549 3550 memset(&dd->tags, 0, sizeof(dd->tags)); 3551 dd->tags.ops = &mtip_mq_ops; 3552 dd->tags.nr_hw_queues = 1; 3553 dd->tags.queue_depth = MTIP_MAX_COMMAND_SLOTS; 3554 dd->tags.reserved_tags = 1; 3555 dd->tags.cmd_size = sizeof(struct mtip_cmd); 3556 dd->tags.numa_node = dd->numa_node; 3557 dd->tags.flags = BLK_MQ_F_SHOULD_MERGE; 3558 dd->tags.driver_data = dd; 3559 dd->tags.timeout = MTIP_NCQ_CMD_TIMEOUT_MS; 3560 3561 rv = blk_mq_alloc_tag_set(&dd->tags); 3562 if (rv) { 3563 dev_err(&dd->pdev->dev, 3564 "Unable to allocate request queue\n"); 3565 goto block_queue_alloc_tag_error; 3566 } 3567 3568 dd->disk = blk_mq_alloc_disk(&dd->tags, dd); 3569 if (IS_ERR(dd->disk)) { 3570 dev_err(&dd->pdev->dev, 3571 "Unable to allocate request queue\n"); 3572 rv = -ENOMEM; 3573 goto block_queue_alloc_init_error; 3574 } 3575 dd->queue = dd->disk->queue; 3576 3577 rv = ida_alloc(&rssd_index_ida, GFP_KERNEL); 3578 if (rv < 0) 3579 goto ida_get_error; 3580 index = rv; 3581 3582 rv = rssd_disk_name_format("rssd", 3583 index, 3584 dd->disk->disk_name, 3585 DISK_NAME_LEN); 3586 if (rv) 3587 goto disk_index_error; 3588 3589 dd->disk->major = dd->major; 3590 dd->disk->first_minor = index * MTIP_MAX_MINORS; 3591 dd->disk->minors = MTIP_MAX_MINORS; 3592 dd->disk->fops = &mtip_block_ops; 3593 dd->disk->private_data = dd; 3594 dd->index = index; 3595 3596 mtip_hw_debugfs_init(dd); 3597 3598 skip_create_disk: 3599 /* Initialize the protocol layer. */ 3600 wait_for_rebuild = mtip_hw_get_identify(dd); 3601 if (wait_for_rebuild < 0) { 3602 dev_err(&dd->pdev->dev, 3603 "Protocol layer initialization failed\n"); 3604 rv = -EINVAL; 3605 goto init_hw_cmds_error; 3606 } 3607 3608 /* 3609 * if rebuild pending, start the service thread, and delay the block 3610 * queue creation and device_add_disk() 3611 */ 3612 if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC) 3613 goto start_service_thread; 3614 3615 /* Set device limits. */ 3616 blk_queue_flag_set(QUEUE_FLAG_NONROT, dd->queue); 3617 blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, dd->queue); 3618 blk_queue_max_segments(dd->queue, MTIP_MAX_SG); 3619 blk_queue_physical_block_size(dd->queue, 4096); 3620 blk_queue_max_hw_sectors(dd->queue, 0xffff); 3621 blk_queue_max_segment_size(dd->queue, 0x400000); 3622 dma_set_max_seg_size(&dd->pdev->dev, 0x400000); 3623 blk_queue_io_min(dd->queue, 4096); 3624 3625 /* Set the capacity of the device in 512 byte sectors. */ 3626 if (!(mtip_hw_get_capacity(dd, &capacity))) { 3627 dev_warn(&dd->pdev->dev, 3628 "Could not read drive capacity\n"); 3629 rv = -EIO; 3630 goto read_capacity_error; 3631 } 3632 set_capacity(dd->disk, capacity); 3633 3634 /* Enable the block device and add it to /dev */ 3635 rv = device_add_disk(&dd->pdev->dev, dd->disk, mtip_disk_attr_groups); 3636 if (rv) 3637 goto read_capacity_error; 3638 3639 if (dd->mtip_svc_handler) { 3640 set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); 3641 return rv; /* service thread created for handling rebuild */ 3642 } 3643 3644 start_service_thread: 3645 dd->mtip_svc_handler = kthread_create_on_node(mtip_service_thread, 3646 dd, dd->numa_node, 3647 "mtip_svc_thd_%02d", index); 3648 3649 if (IS_ERR(dd->mtip_svc_handler)) { 3650 dev_err(&dd->pdev->dev, "service thread failed to start\n"); 3651 dd->mtip_svc_handler = NULL; 3652 rv = -EFAULT; 3653 goto kthread_run_error; 3654 } 3655 wake_up_process(dd->mtip_svc_handler); 3656 if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC) 3657 rv = wait_for_rebuild; 3658 3659 return rv; 3660 3661 kthread_run_error: 3662 /* Delete our gendisk. This also removes the device from /dev */ 3663 del_gendisk(dd->disk); 3664 read_capacity_error: 3665 init_hw_cmds_error: 3666 mtip_hw_debugfs_exit(dd); 3667 disk_index_error: 3668 ida_free(&rssd_index_ida, index); 3669 ida_get_error: 3670 blk_cleanup_disk(dd->disk); 3671 block_queue_alloc_init_error: 3672 blk_mq_free_tag_set(&dd->tags); 3673 block_queue_alloc_tag_error: 3674 mtip_hw_exit(dd); /* De-initialize the protocol layer. */ 3675 protocol_init_error: 3676 return rv; 3677 } 3678 3679 static bool mtip_no_dev_cleanup(struct request *rq, void *data, bool reserv) 3680 { 3681 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq); 3682 3683 cmd->status = BLK_STS_IOERR; 3684 blk_mq_complete_request(rq); 3685 return true; 3686 } 3687 3688 /* 3689 * Block layer deinitialization function. 3690 * 3691 * Called by the PCI layer as each P320 device is removed. 3692 * 3693 * @dd Pointer to the driver data structure. 3694 * 3695 * return value 3696 * 0 3697 */ 3698 static int mtip_block_remove(struct driver_data *dd) 3699 { 3700 mtip_hw_debugfs_exit(dd); 3701 3702 if (dd->mtip_svc_handler) { 3703 set_bit(MTIP_PF_SVC_THD_STOP_BIT, &dd->port->flags); 3704 wake_up_interruptible(&dd->port->svc_wait); 3705 kthread_stop(dd->mtip_svc_handler); 3706 } 3707 3708 if (!dd->sr) { 3709 /* 3710 * Explicitly wait here for IOs to quiesce, 3711 * as mtip_standby_drive usually won't wait for IOs. 3712 */ 3713 if (!mtip_quiesce_io(dd->port, MTIP_QUIESCE_IO_TIMEOUT_MS)) 3714 mtip_standby_drive(dd); 3715 } 3716 else 3717 dev_info(&dd->pdev->dev, "device %s surprise removal\n", 3718 dd->disk->disk_name); 3719 3720 blk_freeze_queue_start(dd->queue); 3721 blk_mq_quiesce_queue(dd->queue); 3722 blk_mq_tagset_busy_iter(&dd->tags, mtip_no_dev_cleanup, dd); 3723 blk_mq_unquiesce_queue(dd->queue); 3724 3725 if (dd->disk) { 3726 if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag)) 3727 del_gendisk(dd->disk); 3728 if (dd->disk->queue) { 3729 blk_cleanup_queue(dd->queue); 3730 blk_mq_free_tag_set(&dd->tags); 3731 dd->queue = NULL; 3732 } 3733 put_disk(dd->disk); 3734 } 3735 dd->disk = NULL; 3736 3737 ida_free(&rssd_index_ida, dd->index); 3738 3739 /* De-initialize the protocol layer. */ 3740 mtip_hw_exit(dd); 3741 3742 return 0; 3743 } 3744 3745 /* 3746 * Function called by the PCI layer when just before the 3747 * machine shuts down. 3748 * 3749 * If a protocol layer shutdown function is present it will be called 3750 * by this function. 3751 * 3752 * @dd Pointer to the driver data structure. 3753 * 3754 * return value 3755 * 0 3756 */ 3757 static int mtip_block_shutdown(struct driver_data *dd) 3758 { 3759 mtip_hw_shutdown(dd); 3760 3761 /* Delete our gendisk structure, and cleanup the blk queue. */ 3762 if (dd->disk) { 3763 dev_info(&dd->pdev->dev, 3764 "Shutting down %s ...\n", dd->disk->disk_name); 3765 3766 if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag)) 3767 del_gendisk(dd->disk); 3768 if (dd->disk->queue) { 3769 blk_cleanup_queue(dd->queue); 3770 blk_mq_free_tag_set(&dd->tags); 3771 } 3772 put_disk(dd->disk); 3773 dd->disk = NULL; 3774 dd->queue = NULL; 3775 } 3776 3777 ida_free(&rssd_index_ida, dd->index); 3778 return 0; 3779 } 3780 3781 static int mtip_block_suspend(struct driver_data *dd) 3782 { 3783 dev_info(&dd->pdev->dev, 3784 "Suspending %s ...\n", dd->disk->disk_name); 3785 mtip_hw_suspend(dd); 3786 return 0; 3787 } 3788 3789 static int mtip_block_resume(struct driver_data *dd) 3790 { 3791 dev_info(&dd->pdev->dev, "Resuming %s ...\n", 3792 dd->disk->disk_name); 3793 mtip_hw_resume(dd); 3794 return 0; 3795 } 3796 3797 static void drop_cpu(int cpu) 3798 { 3799 cpu_use[cpu]--; 3800 } 3801 3802 static int get_least_used_cpu_on_node(int node) 3803 { 3804 int cpu, least_used_cpu, least_cnt; 3805 const struct cpumask *node_mask; 3806 3807 node_mask = cpumask_of_node(node); 3808 least_used_cpu = cpumask_first(node_mask); 3809 least_cnt = cpu_use[least_used_cpu]; 3810 cpu = least_used_cpu; 3811 3812 for_each_cpu(cpu, node_mask) { 3813 if (cpu_use[cpu] < least_cnt) { 3814 least_used_cpu = cpu; 3815 least_cnt = cpu_use[cpu]; 3816 } 3817 } 3818 cpu_use[least_used_cpu]++; 3819 return least_used_cpu; 3820 } 3821 3822 /* Helper for selecting a node in round robin mode */ 3823 static inline int mtip_get_next_rr_node(void) 3824 { 3825 static int next_node = NUMA_NO_NODE; 3826 3827 if (next_node == NUMA_NO_NODE) { 3828 next_node = first_online_node; 3829 return next_node; 3830 } 3831 3832 next_node = next_online_node(next_node); 3833 if (next_node == MAX_NUMNODES) 3834 next_node = first_online_node; 3835 return next_node; 3836 } 3837 3838 static DEFINE_HANDLER(0); 3839 static DEFINE_HANDLER(1); 3840 static DEFINE_HANDLER(2); 3841 static DEFINE_HANDLER(3); 3842 static DEFINE_HANDLER(4); 3843 static DEFINE_HANDLER(5); 3844 static DEFINE_HANDLER(6); 3845 static DEFINE_HANDLER(7); 3846 3847 static void mtip_disable_link_opts(struct driver_data *dd, struct pci_dev *pdev) 3848 { 3849 unsigned short pcie_dev_ctrl; 3850 3851 if (pci_is_pcie(pdev)) { 3852 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &pcie_dev_ctrl); 3853 if (pcie_dev_ctrl & PCI_EXP_DEVCTL_NOSNOOP_EN || 3854 pcie_dev_ctrl & PCI_EXP_DEVCTL_RELAX_EN) { 3855 dev_info(&dd->pdev->dev, 3856 "Disabling ERO/No-Snoop on bridge device %04x:%04x\n", 3857 pdev->vendor, pdev->device); 3858 pcie_dev_ctrl &= ~(PCI_EXP_DEVCTL_NOSNOOP_EN | 3859 PCI_EXP_DEVCTL_RELAX_EN); 3860 pcie_capability_write_word(pdev, PCI_EXP_DEVCTL, 3861 pcie_dev_ctrl); 3862 } 3863 } 3864 } 3865 3866 static void mtip_fix_ero_nosnoop(struct driver_data *dd, struct pci_dev *pdev) 3867 { 3868 /* 3869 * This workaround is specific to AMD/ATI chipset with a PCI upstream 3870 * device with device id 0x5aXX 3871 */ 3872 if (pdev->bus && pdev->bus->self) { 3873 if (pdev->bus->self->vendor == PCI_VENDOR_ID_ATI && 3874 ((pdev->bus->self->device & 0xff00) == 0x5a00)) { 3875 mtip_disable_link_opts(dd, pdev->bus->self); 3876 } else { 3877 /* Check further up the topology */ 3878 struct pci_dev *parent_dev = pdev->bus->self; 3879 if (parent_dev->bus && 3880 parent_dev->bus->parent && 3881 parent_dev->bus->parent->self && 3882 parent_dev->bus->parent->self->vendor == 3883 PCI_VENDOR_ID_ATI && 3884 (parent_dev->bus->parent->self->device & 3885 0xff00) == 0x5a00) { 3886 mtip_disable_link_opts(dd, 3887 parent_dev->bus->parent->self); 3888 } 3889 } 3890 } 3891 } 3892 3893 /* 3894 * Called for each supported PCI device detected. 3895 * 3896 * This function allocates the private data structure, enables the 3897 * PCI device and then calls the block layer initialization function. 3898 * 3899 * return value 3900 * 0 on success else an error code. 3901 */ 3902 static int mtip_pci_probe(struct pci_dev *pdev, 3903 const struct pci_device_id *ent) 3904 { 3905 int rv = 0; 3906 struct driver_data *dd = NULL; 3907 char cpu_list[256]; 3908 const struct cpumask *node_mask; 3909 int cpu, i = 0, j = 0; 3910 int my_node = NUMA_NO_NODE; 3911 unsigned long flags; 3912 3913 /* Allocate memory for this devices private data. */ 3914 my_node = pcibus_to_node(pdev->bus); 3915 if (my_node != NUMA_NO_NODE) { 3916 if (!node_online(my_node)) 3917 my_node = mtip_get_next_rr_node(); 3918 } else { 3919 dev_info(&pdev->dev, "Kernel not reporting proximity, choosing a node\n"); 3920 my_node = mtip_get_next_rr_node(); 3921 } 3922 dev_info(&pdev->dev, "NUMA node %d (closest: %d,%d, probe on %d:%d)\n", 3923 my_node, pcibus_to_node(pdev->bus), dev_to_node(&pdev->dev), 3924 cpu_to_node(raw_smp_processor_id()), raw_smp_processor_id()); 3925 3926 dd = kzalloc_node(sizeof(struct driver_data), GFP_KERNEL, my_node); 3927 if (!dd) 3928 return -ENOMEM; 3929 3930 /* Attach the private data to this PCI device. */ 3931 pci_set_drvdata(pdev, dd); 3932 3933 rv = pcim_enable_device(pdev); 3934 if (rv < 0) { 3935 dev_err(&pdev->dev, "Unable to enable device\n"); 3936 goto iomap_err; 3937 } 3938 3939 /* Map BAR5 to memory. */ 3940 rv = pcim_iomap_regions(pdev, 1 << MTIP_ABAR, MTIP_DRV_NAME); 3941 if (rv < 0) { 3942 dev_err(&pdev->dev, "Unable to map regions\n"); 3943 goto iomap_err; 3944 } 3945 3946 rv = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); 3947 if (rv) { 3948 dev_warn(&pdev->dev, "64-bit DMA enable failed\n"); 3949 goto setmask_err; 3950 } 3951 3952 /* Copy the info we may need later into the private data structure. */ 3953 dd->major = mtip_major; 3954 dd->instance = instance; 3955 dd->pdev = pdev; 3956 dd->numa_node = my_node; 3957 3958 INIT_LIST_HEAD(&dd->online_list); 3959 INIT_LIST_HEAD(&dd->remove_list); 3960 3961 memset(dd->workq_name, 0, 32); 3962 snprintf(dd->workq_name, 31, "mtipq%d", dd->instance); 3963 3964 dd->isr_workq = create_workqueue(dd->workq_name); 3965 if (!dd->isr_workq) { 3966 dev_warn(&pdev->dev, "Can't create wq %d\n", dd->instance); 3967 rv = -ENOMEM; 3968 goto setmask_err; 3969 } 3970 3971 memset(cpu_list, 0, sizeof(cpu_list)); 3972 3973 node_mask = cpumask_of_node(dd->numa_node); 3974 if (!cpumask_empty(node_mask)) { 3975 for_each_cpu(cpu, node_mask) 3976 { 3977 snprintf(&cpu_list[j], 256 - j, "%d ", cpu); 3978 j = strlen(cpu_list); 3979 } 3980 3981 dev_info(&pdev->dev, "Node %d on package %d has %d cpu(s): %s\n", 3982 dd->numa_node, 3983 topology_physical_package_id(cpumask_first(node_mask)), 3984 nr_cpus_node(dd->numa_node), 3985 cpu_list); 3986 } else 3987 dev_dbg(&pdev->dev, "mtip32xx: node_mask empty\n"); 3988 3989 dd->isr_binding = get_least_used_cpu_on_node(dd->numa_node); 3990 dev_info(&pdev->dev, "Initial IRQ binding node:cpu %d:%d\n", 3991 cpu_to_node(dd->isr_binding), dd->isr_binding); 3992 3993 /* first worker context always runs in ISR */ 3994 dd->work[0].cpu_binding = dd->isr_binding; 3995 dd->work[1].cpu_binding = get_least_used_cpu_on_node(dd->numa_node); 3996 dd->work[2].cpu_binding = get_least_used_cpu_on_node(dd->numa_node); 3997 dd->work[3].cpu_binding = dd->work[0].cpu_binding; 3998 dd->work[4].cpu_binding = dd->work[1].cpu_binding; 3999 dd->work[5].cpu_binding = dd->work[2].cpu_binding; 4000 dd->work[6].cpu_binding = dd->work[2].cpu_binding; 4001 dd->work[7].cpu_binding = dd->work[1].cpu_binding; 4002 4003 /* Log the bindings */ 4004 for_each_present_cpu(cpu) { 4005 memset(cpu_list, 0, sizeof(cpu_list)); 4006 for (i = 0, j = 0; i < MTIP_MAX_SLOT_GROUPS; i++) { 4007 if (dd->work[i].cpu_binding == cpu) { 4008 snprintf(&cpu_list[j], 256 - j, "%d ", i); 4009 j = strlen(cpu_list); 4010 } 4011 } 4012 if (j) 4013 dev_info(&pdev->dev, "CPU %d: WQs %s\n", cpu, cpu_list); 4014 } 4015 4016 INIT_WORK(&dd->work[0].work, mtip_workq_sdbf0); 4017 INIT_WORK(&dd->work[1].work, mtip_workq_sdbf1); 4018 INIT_WORK(&dd->work[2].work, mtip_workq_sdbf2); 4019 INIT_WORK(&dd->work[3].work, mtip_workq_sdbf3); 4020 INIT_WORK(&dd->work[4].work, mtip_workq_sdbf4); 4021 INIT_WORK(&dd->work[5].work, mtip_workq_sdbf5); 4022 INIT_WORK(&dd->work[6].work, mtip_workq_sdbf6); 4023 INIT_WORK(&dd->work[7].work, mtip_workq_sdbf7); 4024 4025 pci_set_master(pdev); 4026 rv = pci_enable_msi(pdev); 4027 if (rv) { 4028 dev_warn(&pdev->dev, 4029 "Unable to enable MSI interrupt.\n"); 4030 goto msi_initialize_err; 4031 } 4032 4033 mtip_fix_ero_nosnoop(dd, pdev); 4034 4035 /* Initialize the block layer. */ 4036 rv = mtip_block_initialize(dd); 4037 if (rv < 0) { 4038 dev_err(&pdev->dev, 4039 "Unable to initialize block layer\n"); 4040 goto block_initialize_err; 4041 } 4042 4043 /* 4044 * Increment the instance count so that each device has a unique 4045 * instance number. 4046 */ 4047 instance++; 4048 if (rv != MTIP_FTL_REBUILD_MAGIC) 4049 set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); 4050 else 4051 rv = 0; /* device in rebuild state, return 0 from probe */ 4052 4053 /* Add to online list even if in ftl rebuild */ 4054 spin_lock_irqsave(&dev_lock, flags); 4055 list_add(&dd->online_list, &online_list); 4056 spin_unlock_irqrestore(&dev_lock, flags); 4057 4058 goto done; 4059 4060 block_initialize_err: 4061 pci_disable_msi(pdev); 4062 4063 msi_initialize_err: 4064 if (dd->isr_workq) { 4065 destroy_workqueue(dd->isr_workq); 4066 drop_cpu(dd->work[0].cpu_binding); 4067 drop_cpu(dd->work[1].cpu_binding); 4068 drop_cpu(dd->work[2].cpu_binding); 4069 } 4070 setmask_err: 4071 pcim_iounmap_regions(pdev, 1 << MTIP_ABAR); 4072 4073 iomap_err: 4074 kfree(dd); 4075 pci_set_drvdata(pdev, NULL); 4076 return rv; 4077 done: 4078 return rv; 4079 } 4080 4081 /* 4082 * Called for each probed device when the device is removed or the 4083 * driver is unloaded. 4084 * 4085 * return value 4086 * None 4087 */ 4088 static void mtip_pci_remove(struct pci_dev *pdev) 4089 { 4090 struct driver_data *dd = pci_get_drvdata(pdev); 4091 unsigned long flags, to; 4092 4093 set_bit(MTIP_DDF_REMOVAL_BIT, &dd->dd_flag); 4094 4095 spin_lock_irqsave(&dev_lock, flags); 4096 list_del_init(&dd->online_list); 4097 list_add(&dd->remove_list, &removing_list); 4098 spin_unlock_irqrestore(&dev_lock, flags); 4099 4100 mtip_check_surprise_removal(dd); 4101 synchronize_irq(dd->pdev->irq); 4102 4103 /* Spin until workers are done */ 4104 to = jiffies + msecs_to_jiffies(4000); 4105 do { 4106 msleep(20); 4107 } while (atomic_read(&dd->irq_workers_active) != 0 && 4108 time_before(jiffies, to)); 4109 4110 if (atomic_read(&dd->irq_workers_active) != 0) { 4111 dev_warn(&dd->pdev->dev, 4112 "Completion workers still active!\n"); 4113 } 4114 4115 blk_mark_disk_dead(dd->disk); 4116 set_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag); 4117 4118 /* Clean up the block layer. */ 4119 mtip_block_remove(dd); 4120 4121 if (dd->isr_workq) { 4122 destroy_workqueue(dd->isr_workq); 4123 drop_cpu(dd->work[0].cpu_binding); 4124 drop_cpu(dd->work[1].cpu_binding); 4125 drop_cpu(dd->work[2].cpu_binding); 4126 } 4127 4128 pci_disable_msi(pdev); 4129 4130 spin_lock_irqsave(&dev_lock, flags); 4131 list_del_init(&dd->remove_list); 4132 spin_unlock_irqrestore(&dev_lock, flags); 4133 4134 kfree(dd); 4135 4136 pcim_iounmap_regions(pdev, 1 << MTIP_ABAR); 4137 pci_set_drvdata(pdev, NULL); 4138 } 4139 4140 /* 4141 * Called for each probed device when the device is suspended. 4142 * 4143 * return value 4144 * 0 Success 4145 * <0 Error 4146 */ 4147 static int __maybe_unused mtip_pci_suspend(struct device *dev) 4148 { 4149 int rv = 0; 4150 struct driver_data *dd = dev_get_drvdata(dev); 4151 4152 set_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag); 4153 4154 /* Disable ports & interrupts then send standby immediate */ 4155 rv = mtip_block_suspend(dd); 4156 if (rv < 0) 4157 dev_err(dev, "Failed to suspend controller\n"); 4158 4159 return rv; 4160 } 4161 4162 /* 4163 * Called for each probed device when the device is resumed. 4164 * 4165 * return value 4166 * 0 Success 4167 * <0 Error 4168 */ 4169 static int __maybe_unused mtip_pci_resume(struct device *dev) 4170 { 4171 int rv = 0; 4172 struct driver_data *dd = dev_get_drvdata(dev); 4173 4174 /* 4175 * Calls hbaReset, initPort, & startPort function 4176 * then enables interrupts 4177 */ 4178 rv = mtip_block_resume(dd); 4179 if (rv < 0) 4180 dev_err(dev, "Unable to resume\n"); 4181 4182 clear_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag); 4183 4184 return rv; 4185 } 4186 4187 /* 4188 * Shutdown routine 4189 * 4190 * return value 4191 * None 4192 */ 4193 static void mtip_pci_shutdown(struct pci_dev *pdev) 4194 { 4195 struct driver_data *dd = pci_get_drvdata(pdev); 4196 if (dd) 4197 mtip_block_shutdown(dd); 4198 } 4199 4200 /* Table of device ids supported by this driver. */ 4201 static const struct pci_device_id mtip_pci_tbl[] = { 4202 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320H_DEVICE_ID) }, 4203 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320M_DEVICE_ID) }, 4204 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320S_DEVICE_ID) }, 4205 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P325M_DEVICE_ID) }, 4206 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420H_DEVICE_ID) }, 4207 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420M_DEVICE_ID) }, 4208 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P425M_DEVICE_ID) }, 4209 { 0 } 4210 }; 4211 4212 static SIMPLE_DEV_PM_OPS(mtip_pci_pm_ops, mtip_pci_suspend, mtip_pci_resume); 4213 4214 /* Structure that describes the PCI driver functions. */ 4215 static struct pci_driver mtip_pci_driver = { 4216 .name = MTIP_DRV_NAME, 4217 .id_table = mtip_pci_tbl, 4218 .probe = mtip_pci_probe, 4219 .remove = mtip_pci_remove, 4220 .driver.pm = &mtip_pci_pm_ops, 4221 .shutdown = mtip_pci_shutdown, 4222 }; 4223 4224 MODULE_DEVICE_TABLE(pci, mtip_pci_tbl); 4225 4226 /* 4227 * Module initialization function. 4228 * 4229 * Called once when the module is loaded. This function allocates a major 4230 * block device number to the Cyclone devices and registers the PCI layer 4231 * of the driver. 4232 * 4233 * Return value 4234 * 0 on success else error code. 4235 */ 4236 static int __init mtip_init(void) 4237 { 4238 int error; 4239 4240 pr_info(MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); 4241 4242 /* Allocate a major block device number to use with this driver. */ 4243 error = register_blkdev(0, MTIP_DRV_NAME); 4244 if (error <= 0) { 4245 pr_err("Unable to register block device (%d)\n", 4246 error); 4247 return -EBUSY; 4248 } 4249 mtip_major = error; 4250 4251 dfs_parent = debugfs_create_dir("rssd", NULL); 4252 if (IS_ERR_OR_NULL(dfs_parent)) { 4253 pr_warn("Error creating debugfs parent\n"); 4254 dfs_parent = NULL; 4255 } 4256 if (dfs_parent) { 4257 dfs_device_status = debugfs_create_file("device_status", 4258 0444, dfs_parent, NULL, 4259 &mtip_device_status_fops); 4260 if (IS_ERR_OR_NULL(dfs_device_status)) { 4261 pr_err("Error creating device_status node\n"); 4262 dfs_device_status = NULL; 4263 } 4264 } 4265 4266 /* Register our PCI operations. */ 4267 error = pci_register_driver(&mtip_pci_driver); 4268 if (error) { 4269 debugfs_remove(dfs_parent); 4270 unregister_blkdev(mtip_major, MTIP_DRV_NAME); 4271 } 4272 4273 return error; 4274 } 4275 4276 /* 4277 * Module de-initialization function. 4278 * 4279 * Called once when the module is unloaded. This function deallocates 4280 * the major block device number allocated by mtip_init() and 4281 * unregisters the PCI layer of the driver. 4282 * 4283 * Return value 4284 * none 4285 */ 4286 static void __exit mtip_exit(void) 4287 { 4288 /* Release the allocated major block device number. */ 4289 unregister_blkdev(mtip_major, MTIP_DRV_NAME); 4290 4291 /* Unregister the PCI driver. */ 4292 pci_unregister_driver(&mtip_pci_driver); 4293 4294 debugfs_remove_recursive(dfs_parent); 4295 } 4296 4297 MODULE_AUTHOR("Micron Technology, Inc"); 4298 MODULE_DESCRIPTION("Micron RealSSD PCIe Block Driver"); 4299 MODULE_LICENSE("GPL"); 4300 MODULE_VERSION(MTIP_DRV_VERSION); 4301 4302 module_init(mtip_init); 4303 module_exit(mtip_exit); 4304