1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Driver for the Micron P320 SSD
4 * Copyright (C) 2011 Micron Technology, Inc.
5 *
6 * Portions of this code were derived from works subjected to the
7 * following copyright:
8 * Copyright (C) 2009 Integrated Device Technology, Inc.
9 */
10
11 #include <linux/pci.h>
12 #include <linux/interrupt.h>
13 #include <linux/ata.h>
14 #include <linux/delay.h>
15 #include <linux/hdreg.h>
16 #include <linux/uaccess.h>
17 #include <linux/random.h>
18 #include <linux/smp.h>
19 #include <linux/compat.h>
20 #include <linux/fs.h>
21 #include <linux/module.h>
22 #include <linux/blkdev.h>
23 #include <linux/blk-mq.h>
24 #include <linux/bio.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/idr.h>
27 #include <linux/kthread.h>
28 #include <../drivers/ata/ahci.h>
29 #include <linux/export.h>
30 #include <linux/debugfs.h>
31 #include <linux/prefetch.h>
32 #include <linux/numa.h>
33 #include "mtip32xx.h"
34
35 #define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32)
36
37 /* DMA region containing RX Fis, Identify, RLE10, and SMART buffers */
38 #define AHCI_RX_FIS_SZ 0x100
39 #define AHCI_RX_FIS_OFFSET 0x0
40 #define AHCI_IDFY_SZ ATA_SECT_SIZE
41 #define AHCI_IDFY_OFFSET 0x400
42 #define AHCI_SECTBUF_SZ ATA_SECT_SIZE
43 #define AHCI_SECTBUF_OFFSET 0x800
44 #define AHCI_SMARTBUF_SZ ATA_SECT_SIZE
45 #define AHCI_SMARTBUF_OFFSET 0xC00
46 /* 0x100 + 0x200 + 0x200 + 0x200 is smaller than 4k but we pad it out */
47 #define BLOCK_DMA_ALLOC_SZ 4096
48
49 /* DMA region containing command table (should be 8192 bytes) */
50 #define AHCI_CMD_SLOT_SZ sizeof(struct mtip_cmd_hdr)
51 #define AHCI_CMD_TBL_SZ (MTIP_MAX_COMMAND_SLOTS * AHCI_CMD_SLOT_SZ)
52 #define AHCI_CMD_TBL_OFFSET 0x0
53
54 /* DMA region per command (contains header and SGL) */
55 #define AHCI_CMD_TBL_HDR_SZ 0x80
56 #define AHCI_CMD_TBL_HDR_OFFSET 0x0
57 #define AHCI_CMD_TBL_SGL_SZ (MTIP_MAX_SG * sizeof(struct mtip_cmd_sg))
58 #define AHCI_CMD_TBL_SGL_OFFSET AHCI_CMD_TBL_HDR_SZ
59 #define CMD_DMA_ALLOC_SZ (AHCI_CMD_TBL_SGL_SZ + AHCI_CMD_TBL_HDR_SZ)
60
61
62 #define HOST_CAP_NZDMA (1 << 19)
63 #define HOST_HSORG 0xFC
64 #define HSORG_DISABLE_SLOTGRP_INTR (1<<24)
65 #define HSORG_DISABLE_SLOTGRP_PXIS (1<<16)
66 #define HSORG_HWREV 0xFF00
67 #define HSORG_STYLE 0x8
68 #define HSORG_SLOTGROUPS 0x7
69
70 #define PORT_COMMAND_ISSUE 0x38
71 #define PORT_SDBV 0x7C
72
73 #define PORT_OFFSET 0x100
74 #define PORT_MEM_SIZE 0x80
75
76 #define PORT_IRQ_ERR \
77 (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | PORT_IRQ_CONNECT | \
78 PORT_IRQ_PHYRDY | PORT_IRQ_UNK_FIS | PORT_IRQ_BAD_PMP | \
79 PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_NONFATAL | \
80 PORT_IRQ_OVERFLOW)
81 #define PORT_IRQ_LEGACY \
82 (PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
83 #define PORT_IRQ_HANDLED \
84 (PORT_IRQ_SDB_FIS | PORT_IRQ_LEGACY | \
85 PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR | \
86 PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)
87 #define DEF_PORT_IRQ \
88 (PORT_IRQ_ERR | PORT_IRQ_LEGACY | PORT_IRQ_SDB_FIS)
89
90 /* product numbers */
91 #define MTIP_PRODUCT_UNKNOWN 0x00
92 #define MTIP_PRODUCT_ASICFPGA 0x11
93
94 /* Device instance number, incremented each time a device is probed. */
95 static int instance;
96
97 /*
98 * Global variable used to hold the major block device number
99 * allocated in mtip_init().
100 */
101 static int mtip_major;
102 static struct dentry *dfs_parent;
103
104 static u32 cpu_use[NR_CPUS];
105
106 static DEFINE_IDA(rssd_index_ida);
107
108 static int mtip_block_initialize(struct driver_data *dd);
109
110 #ifdef CONFIG_COMPAT
111 struct mtip_compat_ide_task_request_s {
112 __u8 io_ports[8];
113 __u8 hob_ports[8];
114 ide_reg_valid_t out_flags;
115 ide_reg_valid_t in_flags;
116 int data_phase;
117 int req_cmd;
118 compat_ulong_t out_size;
119 compat_ulong_t in_size;
120 };
121 #endif
122
123 /*
124 * This function check_for_surprise_removal is called
125 * while card is removed from the system and it will
126 * read the vendor id from the configuration space
127 *
128 * @pdev Pointer to the pci_dev structure.
129 *
130 * return value
131 * true if device removed, else false
132 */
mtip_check_surprise_removal(struct driver_data * dd)133 static bool mtip_check_surprise_removal(struct driver_data *dd)
134 {
135 u16 vendor_id = 0;
136
137 if (dd->sr)
138 return true;
139
140 /* Read the vendorID from the configuration space */
141 pci_read_config_word(dd->pdev, 0x00, &vendor_id);
142 if (vendor_id == 0xFFFF) {
143 dd->sr = true;
144 if (dd->disk)
145 blk_mark_disk_dead(dd->disk);
146 return true; /* device removed */
147 }
148
149 return false; /* device present */
150 }
151
mtip_cmd_from_tag(struct driver_data * dd,unsigned int tag)152 static struct mtip_cmd *mtip_cmd_from_tag(struct driver_data *dd,
153 unsigned int tag)
154 {
155 return blk_mq_rq_to_pdu(blk_mq_tag_to_rq(dd->tags.tags[0], tag));
156 }
157
158 /*
159 * Reset the HBA (without sleeping)
160 *
161 * @dd Pointer to the driver data structure.
162 *
163 * return value
164 * 0 The reset was successful.
165 * -1 The HBA Reset bit did not clear.
166 */
mtip_hba_reset(struct driver_data * dd)167 static int mtip_hba_reset(struct driver_data *dd)
168 {
169 unsigned long timeout;
170
171 /* Set the reset bit */
172 writel(HOST_RESET, dd->mmio + HOST_CTL);
173
174 /* Flush */
175 readl(dd->mmio + HOST_CTL);
176
177 /*
178 * Spin for up to 10 seconds waiting for reset acknowledgement. Spec
179 * is 1 sec but in LUN failure conditions, up to 10 secs are required
180 */
181 timeout = jiffies + msecs_to_jiffies(10000);
182 do {
183 mdelay(10);
184 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))
185 return -1;
186
187 } while ((readl(dd->mmio + HOST_CTL) & HOST_RESET)
188 && time_before(jiffies, timeout));
189
190 if (readl(dd->mmio + HOST_CTL) & HOST_RESET)
191 return -1;
192
193 return 0;
194 }
195
196 /*
197 * Issue a command to the hardware.
198 *
199 * Set the appropriate bit in the s_active and Command Issue hardware
200 * registers, causing hardware command processing to begin.
201 *
202 * @port Pointer to the port structure.
203 * @tag The tag of the command to be issued.
204 *
205 * return value
206 * None
207 */
mtip_issue_ncq_command(struct mtip_port * port,int tag)208 static inline void mtip_issue_ncq_command(struct mtip_port *port, int tag)
209 {
210 int group = tag >> 5;
211
212 /* guard SACT and CI registers */
213 spin_lock(&port->cmd_issue_lock[group]);
214 writel((1 << MTIP_TAG_BIT(tag)),
215 port->s_active[MTIP_TAG_INDEX(tag)]);
216 writel((1 << MTIP_TAG_BIT(tag)),
217 port->cmd_issue[MTIP_TAG_INDEX(tag)]);
218 spin_unlock(&port->cmd_issue_lock[group]);
219 }
220
221 /*
222 * Enable/disable the reception of FIS
223 *
224 * @port Pointer to the port data structure
225 * @enable 1 to enable, 0 to disable
226 *
227 * return value
228 * Previous state: 1 enabled, 0 disabled
229 */
mtip_enable_fis(struct mtip_port * port,int enable)230 static int mtip_enable_fis(struct mtip_port *port, int enable)
231 {
232 u32 tmp;
233
234 /* enable FIS reception */
235 tmp = readl(port->mmio + PORT_CMD);
236 if (enable)
237 writel(tmp | PORT_CMD_FIS_RX, port->mmio + PORT_CMD);
238 else
239 writel(tmp & ~PORT_CMD_FIS_RX, port->mmio + PORT_CMD);
240
241 /* Flush */
242 readl(port->mmio + PORT_CMD);
243
244 return (((tmp & PORT_CMD_FIS_RX) == PORT_CMD_FIS_RX));
245 }
246
247 /*
248 * Enable/disable the DMA engine
249 *
250 * @port Pointer to the port data structure
251 * @enable 1 to enable, 0 to disable
252 *
253 * return value
254 * Previous state: 1 enabled, 0 disabled.
255 */
mtip_enable_engine(struct mtip_port * port,int enable)256 static int mtip_enable_engine(struct mtip_port *port, int enable)
257 {
258 u32 tmp;
259
260 /* enable FIS reception */
261 tmp = readl(port->mmio + PORT_CMD);
262 if (enable)
263 writel(tmp | PORT_CMD_START, port->mmio + PORT_CMD);
264 else
265 writel(tmp & ~PORT_CMD_START, port->mmio + PORT_CMD);
266
267 readl(port->mmio + PORT_CMD);
268 return (((tmp & PORT_CMD_START) == PORT_CMD_START));
269 }
270
271 /*
272 * Enables the port DMA engine and FIS reception.
273 *
274 * return value
275 * None
276 */
mtip_start_port(struct mtip_port * port)277 static inline void mtip_start_port(struct mtip_port *port)
278 {
279 /* Enable FIS reception */
280 mtip_enable_fis(port, 1);
281
282 /* Enable the DMA engine */
283 mtip_enable_engine(port, 1);
284 }
285
286 /*
287 * Deinitialize a port by disabling port interrupts, the DMA engine,
288 * and FIS reception.
289 *
290 * @port Pointer to the port structure
291 *
292 * return value
293 * None
294 */
mtip_deinit_port(struct mtip_port * port)295 static inline void mtip_deinit_port(struct mtip_port *port)
296 {
297 /* Disable interrupts on this port */
298 writel(0, port->mmio + PORT_IRQ_MASK);
299
300 /* Disable the DMA engine */
301 mtip_enable_engine(port, 0);
302
303 /* Disable FIS reception */
304 mtip_enable_fis(port, 0);
305 }
306
307 /*
308 * Initialize a port.
309 *
310 * This function deinitializes the port by calling mtip_deinit_port() and
311 * then initializes it by setting the command header and RX FIS addresses,
312 * clearing the SError register and any pending port interrupts before
313 * re-enabling the default set of port interrupts.
314 *
315 * @port Pointer to the port structure.
316 *
317 * return value
318 * None
319 */
mtip_init_port(struct mtip_port * port)320 static void mtip_init_port(struct mtip_port *port)
321 {
322 int i;
323 mtip_deinit_port(port);
324
325 /* Program the command list base and FIS base addresses */
326 if (readl(port->dd->mmio + HOST_CAP) & HOST_CAP_64) {
327 writel((port->command_list_dma >> 16) >> 16,
328 port->mmio + PORT_LST_ADDR_HI);
329 writel((port->rxfis_dma >> 16) >> 16,
330 port->mmio + PORT_FIS_ADDR_HI);
331 set_bit(MTIP_PF_HOST_CAP_64, &port->flags);
332 }
333
334 writel(port->command_list_dma & 0xFFFFFFFF,
335 port->mmio + PORT_LST_ADDR);
336 writel(port->rxfis_dma & 0xFFFFFFFF, port->mmio + PORT_FIS_ADDR);
337
338 /* Clear SError */
339 writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR);
340
341 /* reset the completed registers.*/
342 for (i = 0; i < port->dd->slot_groups; i++)
343 writel(0xFFFFFFFF, port->completed[i]);
344
345 /* Clear any pending interrupts for this port */
346 writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT);
347
348 /* Clear any pending interrupts on the HBA. */
349 writel(readl(port->dd->mmio + HOST_IRQ_STAT),
350 port->dd->mmio + HOST_IRQ_STAT);
351
352 /* Enable port interrupts */
353 writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK);
354 }
355
356 /*
357 * Restart a port
358 *
359 * @port Pointer to the port data structure.
360 *
361 * return value
362 * None
363 */
mtip_restart_port(struct mtip_port * port)364 static void mtip_restart_port(struct mtip_port *port)
365 {
366 unsigned long timeout;
367
368 /* Disable the DMA engine */
369 mtip_enable_engine(port, 0);
370
371 /* Chip quirk: wait up to 500ms for PxCMD.CR == 0 */
372 timeout = jiffies + msecs_to_jiffies(500);
373 while ((readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON)
374 && time_before(jiffies, timeout))
375 ;
376
377 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
378 return;
379
380 /*
381 * Chip quirk: escalate to hba reset if
382 * PxCMD.CR not clear after 500 ms
383 */
384 if (readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON) {
385 dev_warn(&port->dd->pdev->dev,
386 "PxCMD.CR not clear, escalating reset\n");
387
388 if (mtip_hba_reset(port->dd))
389 dev_err(&port->dd->pdev->dev,
390 "HBA reset escalation failed.\n");
391
392 /* 30 ms delay before com reset to quiesce chip */
393 mdelay(30);
394 }
395
396 dev_warn(&port->dd->pdev->dev, "Issuing COM reset\n");
397
398 /* Set PxSCTL.DET */
399 writel(readl(port->mmio + PORT_SCR_CTL) |
400 1, port->mmio + PORT_SCR_CTL);
401 readl(port->mmio + PORT_SCR_CTL);
402
403 /* Wait 1 ms to quiesce chip function */
404 timeout = jiffies + msecs_to_jiffies(1);
405 while (time_before(jiffies, timeout))
406 ;
407
408 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
409 return;
410
411 /* Clear PxSCTL.DET */
412 writel(readl(port->mmio + PORT_SCR_CTL) & ~1,
413 port->mmio + PORT_SCR_CTL);
414 readl(port->mmio + PORT_SCR_CTL);
415
416 /* Wait 500 ms for bit 0 of PORT_SCR_STS to be set */
417 timeout = jiffies + msecs_to_jiffies(500);
418 while (((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0)
419 && time_before(jiffies, timeout))
420 ;
421
422 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
423 return;
424
425 if ((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0)
426 dev_warn(&port->dd->pdev->dev,
427 "COM reset failed\n");
428
429 mtip_init_port(port);
430 mtip_start_port(port);
431
432 }
433
mtip_device_reset(struct driver_data * dd)434 static int mtip_device_reset(struct driver_data *dd)
435 {
436 int rv = 0;
437
438 if (mtip_check_surprise_removal(dd))
439 return 0;
440
441 if (mtip_hba_reset(dd) < 0)
442 rv = -EFAULT;
443
444 mdelay(1);
445 mtip_init_port(dd->port);
446 mtip_start_port(dd->port);
447
448 /* Enable interrupts on the HBA. */
449 writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN,
450 dd->mmio + HOST_CTL);
451 return rv;
452 }
453
454 /*
455 * Helper function for tag logging
456 */
print_tags(struct driver_data * dd,char * msg,unsigned long * tagbits,int cnt)457 static void print_tags(struct driver_data *dd,
458 char *msg,
459 unsigned long *tagbits,
460 int cnt)
461 {
462 unsigned char tagmap[128];
463 int group, tagmap_len = 0;
464
465 memset(tagmap, 0, sizeof(tagmap));
466 for (group = SLOTBITS_IN_LONGS; group > 0; group--)
467 tagmap_len += sprintf(tagmap + tagmap_len, "%016lX ",
468 tagbits[group-1]);
469 dev_warn(&dd->pdev->dev,
470 "%d command(s) %s: tagmap [%s]", cnt, msg, tagmap);
471 }
472
473 static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer,
474 dma_addr_t buffer_dma, unsigned int sectors);
475 static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
476 struct smart_attr *attrib);
477
mtip_complete_command(struct mtip_cmd * cmd,blk_status_t status)478 static void mtip_complete_command(struct mtip_cmd *cmd, blk_status_t status)
479 {
480 struct request *req = blk_mq_rq_from_pdu(cmd);
481
482 cmd->status = status;
483 if (likely(!blk_should_fake_timeout(req->q)))
484 blk_mq_complete_request(req);
485 }
486
487 /*
488 * Handle an error.
489 *
490 * @dd Pointer to the DRIVER_DATA structure.
491 *
492 * return value
493 * None
494 */
mtip_handle_tfe(struct driver_data * dd)495 static void mtip_handle_tfe(struct driver_data *dd)
496 {
497 int group, tag, bit, reissue, rv;
498 struct mtip_port *port;
499 struct mtip_cmd *cmd;
500 u32 completed;
501 struct host_to_dev_fis *fis;
502 unsigned long tagaccum[SLOTBITS_IN_LONGS];
503 unsigned int cmd_cnt = 0;
504 unsigned char *buf;
505 char *fail_reason = NULL;
506 int fail_all_ncq_write = 0, fail_all_ncq_cmds = 0;
507
508 dev_warn(&dd->pdev->dev, "Taskfile error\n");
509
510 port = dd->port;
511
512 if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
513 cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL);
514 dbg_printk(MTIP_DRV_NAME " TFE for the internal command\n");
515 mtip_complete_command(cmd, BLK_STS_IOERR);
516 return;
517 }
518
519 /* clear the tag accumulator */
520 memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
521
522 /* Loop through all the groups */
523 for (group = 0; group < dd->slot_groups; group++) {
524 completed = readl(port->completed[group]);
525
526 dev_warn(&dd->pdev->dev, "g=%u, comp=%x\n", group, completed);
527
528 /* clear completed status register in the hardware.*/
529 writel(completed, port->completed[group]);
530
531 /* Process successfully completed commands */
532 for (bit = 0; bit < 32 && completed; bit++) {
533 if (!(completed & (1<<bit)))
534 continue;
535 tag = (group << 5) + bit;
536
537 /* Skip the internal command slot */
538 if (tag == MTIP_TAG_INTERNAL)
539 continue;
540
541 cmd = mtip_cmd_from_tag(dd, tag);
542 mtip_complete_command(cmd, 0);
543 set_bit(tag, tagaccum);
544 cmd_cnt++;
545 }
546 }
547
548 print_tags(dd, "completed (TFE)", tagaccum, cmd_cnt);
549
550 /* Restart the port */
551 mdelay(20);
552 mtip_restart_port(port);
553
554 /* Trying to determine the cause of the error */
555 rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ,
556 dd->port->log_buf,
557 dd->port->log_buf_dma, 1);
558 if (rv) {
559 dev_warn(&dd->pdev->dev,
560 "Error in READ LOG EXT (10h) command\n");
561 /* non-critical error, don't fail the load */
562 } else {
563 buf = (unsigned char *)dd->port->log_buf;
564 if (buf[259] & 0x1) {
565 dev_info(&dd->pdev->dev,
566 "Write protect bit is set.\n");
567 set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag);
568 fail_all_ncq_write = 1;
569 fail_reason = "write protect";
570 }
571 if (buf[288] == 0xF7) {
572 dev_info(&dd->pdev->dev,
573 "Exceeded Tmax, drive in thermal shutdown.\n");
574 set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag);
575 fail_all_ncq_cmds = 1;
576 fail_reason = "thermal shutdown";
577 }
578 if (buf[288] == 0xBF) {
579 set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag);
580 dev_info(&dd->pdev->dev,
581 "Drive indicates rebuild has failed. Secure erase required.\n");
582 fail_all_ncq_cmds = 1;
583 fail_reason = "rebuild failed";
584 }
585 }
586
587 /* clear the tag accumulator */
588 memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
589
590 /* Loop through all the groups */
591 for (group = 0; group < dd->slot_groups; group++) {
592 for (bit = 0; bit < 32; bit++) {
593 reissue = 1;
594 tag = (group << 5) + bit;
595 cmd = mtip_cmd_from_tag(dd, tag);
596
597 fis = (struct host_to_dev_fis *)cmd->command;
598
599 /* Should re-issue? */
600 if (tag == MTIP_TAG_INTERNAL ||
601 fis->command == ATA_CMD_SET_FEATURES)
602 reissue = 0;
603 else {
604 if (fail_all_ncq_cmds ||
605 (fail_all_ncq_write &&
606 fis->command == ATA_CMD_FPDMA_WRITE)) {
607 dev_warn(&dd->pdev->dev,
608 " Fail: %s w/tag %d [%s].\n",
609 fis->command == ATA_CMD_FPDMA_WRITE ?
610 "write" : "read",
611 tag,
612 fail_reason != NULL ?
613 fail_reason : "unknown");
614 mtip_complete_command(cmd, BLK_STS_MEDIUM);
615 continue;
616 }
617 }
618
619 /*
620 * First check if this command has
621 * exceeded its retries.
622 */
623 if (reissue && (cmd->retries-- > 0)) {
624
625 set_bit(tag, tagaccum);
626
627 /* Re-issue the command. */
628 mtip_issue_ncq_command(port, tag);
629
630 continue;
631 }
632
633 /* Retire a command that will not be reissued */
634 dev_warn(&port->dd->pdev->dev,
635 "retiring tag %d\n", tag);
636
637 mtip_complete_command(cmd, BLK_STS_IOERR);
638 }
639 }
640 print_tags(dd, "reissued (TFE)", tagaccum, cmd_cnt);
641 }
642
643 /*
644 * Handle a set device bits interrupt
645 */
mtip_workq_sdbfx(struct mtip_port * port,int group,u32 completed)646 static inline void mtip_workq_sdbfx(struct mtip_port *port, int group,
647 u32 completed)
648 {
649 struct driver_data *dd = port->dd;
650 int tag, bit;
651 struct mtip_cmd *command;
652
653 if (!completed) {
654 WARN_ON_ONCE(!completed);
655 return;
656 }
657 /* clear completed status register in the hardware.*/
658 writel(completed, port->completed[group]);
659
660 /* Process completed commands. */
661 for (bit = 0; (bit < 32) && completed; bit++) {
662 if (completed & 0x01) {
663 tag = (group << 5) | bit;
664
665 /* skip internal command slot. */
666 if (unlikely(tag == MTIP_TAG_INTERNAL))
667 continue;
668
669 command = mtip_cmd_from_tag(dd, tag);
670 mtip_complete_command(command, 0);
671 }
672 completed >>= 1;
673 }
674
675 /* If last, re-enable interrupts */
676 if (atomic_dec_return(&dd->irq_workers_active) == 0)
677 writel(0xffffffff, dd->mmio + HOST_IRQ_STAT);
678 }
679
680 /*
681 * Process legacy pio and d2h interrupts
682 */
mtip_process_legacy(struct driver_data * dd,u32 port_stat)683 static inline void mtip_process_legacy(struct driver_data *dd, u32 port_stat)
684 {
685 struct mtip_port *port = dd->port;
686 struct mtip_cmd *cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL);
687
688 if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) && cmd) {
689 int group = MTIP_TAG_INDEX(MTIP_TAG_INTERNAL);
690 int status = readl(port->cmd_issue[group]);
691
692 if (!(status & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL))))
693 mtip_complete_command(cmd, 0);
694 }
695 }
696
697 /*
698 * Demux and handle errors
699 */
mtip_process_errors(struct driver_data * dd,u32 port_stat)700 static inline void mtip_process_errors(struct driver_data *dd, u32 port_stat)
701 {
702 if (unlikely(port_stat & PORT_IRQ_CONNECT)) {
703 dev_warn(&dd->pdev->dev,
704 "Clearing PxSERR.DIAG.x\n");
705 writel((1 << 26), dd->port->mmio + PORT_SCR_ERR);
706 }
707
708 if (unlikely(port_stat & PORT_IRQ_PHYRDY)) {
709 dev_warn(&dd->pdev->dev,
710 "Clearing PxSERR.DIAG.n\n");
711 writel((1 << 16), dd->port->mmio + PORT_SCR_ERR);
712 }
713
714 if (unlikely(port_stat & ~PORT_IRQ_HANDLED)) {
715 dev_warn(&dd->pdev->dev,
716 "Port stat errors %x unhandled\n",
717 (port_stat & ~PORT_IRQ_HANDLED));
718 if (mtip_check_surprise_removal(dd))
719 return;
720 }
721 if (likely(port_stat & (PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR))) {
722 set_bit(MTIP_PF_EH_ACTIVE_BIT, &dd->port->flags);
723 wake_up_interruptible(&dd->port->svc_wait);
724 }
725 }
726
mtip_handle_irq(struct driver_data * data)727 static inline irqreturn_t mtip_handle_irq(struct driver_data *data)
728 {
729 struct driver_data *dd = (struct driver_data *) data;
730 struct mtip_port *port = dd->port;
731 u32 hba_stat, port_stat;
732 int rv = IRQ_NONE;
733 int do_irq_enable = 1, i, workers;
734 struct mtip_work *twork;
735
736 hba_stat = readl(dd->mmio + HOST_IRQ_STAT);
737 if (hba_stat) {
738 rv = IRQ_HANDLED;
739
740 /* Acknowledge the interrupt status on the port.*/
741 port_stat = readl(port->mmio + PORT_IRQ_STAT);
742 if (unlikely(port_stat == 0xFFFFFFFF)) {
743 mtip_check_surprise_removal(dd);
744 return IRQ_HANDLED;
745 }
746 writel(port_stat, port->mmio + PORT_IRQ_STAT);
747
748 /* Demux port status */
749 if (likely(port_stat & PORT_IRQ_SDB_FIS)) {
750 do_irq_enable = 0;
751 WARN_ON_ONCE(atomic_read(&dd->irq_workers_active) != 0);
752
753 /* Start at 1: group zero is always local? */
754 for (i = 0, workers = 0; i < MTIP_MAX_SLOT_GROUPS;
755 i++) {
756 twork = &dd->work[i];
757 twork->completed = readl(port->completed[i]);
758 if (twork->completed)
759 workers++;
760 }
761
762 atomic_set(&dd->irq_workers_active, workers);
763 if (workers) {
764 for (i = 1; i < MTIP_MAX_SLOT_GROUPS; i++) {
765 twork = &dd->work[i];
766 if (twork->completed)
767 queue_work_on(
768 twork->cpu_binding,
769 dd->isr_workq,
770 &twork->work);
771 }
772
773 if (likely(dd->work[0].completed))
774 mtip_workq_sdbfx(port, 0,
775 dd->work[0].completed);
776
777 } else {
778 /*
779 * Chip quirk: SDB interrupt but nothing
780 * to complete
781 */
782 do_irq_enable = 1;
783 }
784 }
785
786 if (unlikely(port_stat & PORT_IRQ_ERR)) {
787 if (unlikely(mtip_check_surprise_removal(dd))) {
788 /* don't proceed further */
789 return IRQ_HANDLED;
790 }
791 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
792 &dd->dd_flag))
793 return rv;
794
795 mtip_process_errors(dd, port_stat & PORT_IRQ_ERR);
796 }
797
798 if (unlikely(port_stat & PORT_IRQ_LEGACY))
799 mtip_process_legacy(dd, port_stat & PORT_IRQ_LEGACY);
800 }
801
802 /* acknowledge interrupt */
803 if (unlikely(do_irq_enable))
804 writel(hba_stat, dd->mmio + HOST_IRQ_STAT);
805
806 return rv;
807 }
808
809 /*
810 * HBA interrupt subroutine.
811 *
812 * @irq IRQ number.
813 * @instance Pointer to the driver data structure.
814 *
815 * return value
816 * IRQ_HANDLED A HBA interrupt was pending and handled.
817 * IRQ_NONE This interrupt was not for the HBA.
818 */
mtip_irq_handler(int irq,void * instance)819 static irqreturn_t mtip_irq_handler(int irq, void *instance)
820 {
821 struct driver_data *dd = instance;
822
823 return mtip_handle_irq(dd);
824 }
825
mtip_issue_non_ncq_command(struct mtip_port * port,int tag)826 static void mtip_issue_non_ncq_command(struct mtip_port *port, int tag)
827 {
828 writel(1 << MTIP_TAG_BIT(tag), port->cmd_issue[MTIP_TAG_INDEX(tag)]);
829 }
830
mtip_pause_ncq(struct mtip_port * port,struct host_to_dev_fis * fis)831 static bool mtip_pause_ncq(struct mtip_port *port,
832 struct host_to_dev_fis *fis)
833 {
834 unsigned long task_file_data;
835
836 task_file_data = readl(port->mmio+PORT_TFDATA);
837 if ((task_file_data & 1))
838 return false;
839
840 if (fis->command == ATA_CMD_SEC_ERASE_PREP) {
841 port->ic_pause_timer = jiffies;
842 return true;
843 } else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) &&
844 (fis->features == 0x03)) {
845 set_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
846 port->ic_pause_timer = jiffies;
847 return true;
848 } else if ((fis->command == ATA_CMD_SEC_ERASE_UNIT) ||
849 ((fis->command == 0xFC) &&
850 (fis->features == 0x27 || fis->features == 0x72 ||
851 fis->features == 0x62 || fis->features == 0x26))) {
852 clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag);
853 clear_bit(MTIP_DDF_REBUILD_FAILED_BIT, &port->dd->dd_flag);
854 /* Com reset after secure erase or lowlevel format */
855 mtip_restart_port(port);
856 clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
857 return false;
858 }
859
860 return false;
861 }
862
mtip_commands_active(struct mtip_port * port)863 static bool mtip_commands_active(struct mtip_port *port)
864 {
865 unsigned int active;
866 unsigned int n;
867
868 /*
869 * Ignore s_active bit 0 of array element 0.
870 * This bit will always be set
871 */
872 active = readl(port->s_active[0]) & 0xFFFFFFFE;
873 for (n = 1; n < port->dd->slot_groups; n++)
874 active |= readl(port->s_active[n]);
875
876 return active != 0;
877 }
878
879 /*
880 * Wait for port to quiesce
881 *
882 * @port Pointer to port data structure
883 * @timeout Max duration to wait (ms)
884 *
885 * return value
886 * 0 Success
887 * -EBUSY Commands still active
888 */
mtip_quiesce_io(struct mtip_port * port,unsigned long timeout)889 static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout)
890 {
891 unsigned long to;
892 bool active = true;
893
894 blk_mq_quiesce_queue(port->dd->queue);
895
896 to = jiffies + msecs_to_jiffies(timeout);
897 do {
898 if (test_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags) &&
899 test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) {
900 msleep(20);
901 continue; /* svc thd is actively issuing commands */
902 }
903
904 msleep(100);
905
906 if (mtip_check_surprise_removal(port->dd))
907 goto err_fault;
908
909 active = mtip_commands_active(port);
910 if (!active)
911 break;
912 } while (time_before(jiffies, to));
913
914 blk_mq_unquiesce_queue(port->dd->queue);
915 return active ? -EBUSY : 0;
916 err_fault:
917 blk_mq_unquiesce_queue(port->dd->queue);
918 return -EFAULT;
919 }
920
921 struct mtip_int_cmd {
922 int fis_len;
923 dma_addr_t buffer;
924 int buf_len;
925 u32 opts;
926 };
927
928 /*
929 * Execute an internal command and wait for the completion.
930 *
931 * @port Pointer to the port data structure.
932 * @fis Pointer to the FIS that describes the command.
933 * @fis_len Length in WORDS of the FIS.
934 * @buffer DMA accessible for command data.
935 * @buf_len Length, in bytes, of the data buffer.
936 * @opts Command header options, excluding the FIS length
937 * and the number of PRD entries.
938 * @timeout Time in ms to wait for the command to complete.
939 *
940 * return value
941 * 0 Command completed successfully.
942 * -EFAULT The buffer address is not correctly aligned.
943 * -EBUSY Internal command or other IO in progress.
944 * -EAGAIN Time out waiting for command to complete.
945 */
mtip_exec_internal_command(struct mtip_port * port,struct host_to_dev_fis * fis,int fis_len,dma_addr_t buffer,int buf_len,u32 opts,unsigned long timeout)946 static int mtip_exec_internal_command(struct mtip_port *port,
947 struct host_to_dev_fis *fis,
948 int fis_len,
949 dma_addr_t buffer,
950 int buf_len,
951 u32 opts,
952 unsigned long timeout)
953 {
954 struct mtip_cmd *int_cmd;
955 struct driver_data *dd = port->dd;
956 struct request *rq;
957 struct mtip_int_cmd icmd = {
958 .fis_len = fis_len,
959 .buffer = buffer,
960 .buf_len = buf_len,
961 .opts = opts
962 };
963 int rv = 0;
964
965 /* Make sure the buffer is 8 byte aligned. This is asic specific. */
966 if (buffer & 0x00000007) {
967 dev_err(&dd->pdev->dev, "SG buffer is not 8 byte aligned\n");
968 return -EFAULT;
969 }
970
971 if (mtip_check_surprise_removal(dd))
972 return -EFAULT;
973
974 rq = blk_mq_alloc_request(dd->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_RESERVED);
975 if (IS_ERR(rq)) {
976 dbg_printk(MTIP_DRV_NAME "Unable to allocate tag for PIO cmd\n");
977 return -EFAULT;
978 }
979
980 set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
981
982 if (fis->command == ATA_CMD_SEC_ERASE_PREP)
983 set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
984
985 clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
986
987 if (fis->command != ATA_CMD_STANDBYNOW1) {
988 /* wait for io to complete if non atomic */
989 if (mtip_quiesce_io(port, MTIP_QUIESCE_IO_TIMEOUT_MS) < 0) {
990 dev_warn(&dd->pdev->dev, "Failed to quiesce IO\n");
991 blk_mq_free_request(rq);
992 clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
993 wake_up_interruptible(&port->svc_wait);
994 return -EBUSY;
995 }
996 }
997
998 /* Copy the command to the command table */
999 int_cmd = blk_mq_rq_to_pdu(rq);
1000 int_cmd->icmd = &icmd;
1001 memcpy(int_cmd->command, fis, fis_len*4);
1002
1003 rq->timeout = timeout;
1004
1005 /* insert request and run queue */
1006 blk_execute_rq(rq, true);
1007
1008 if (int_cmd->status) {
1009 dev_err(&dd->pdev->dev, "Internal command [%02X] failed %d\n",
1010 fis->command, int_cmd->status);
1011 rv = -EIO;
1012
1013 if (mtip_check_surprise_removal(dd) ||
1014 test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
1015 &dd->dd_flag)) {
1016 dev_err(&dd->pdev->dev,
1017 "Internal command [%02X] wait returned due to SR\n",
1018 fis->command);
1019 rv = -ENXIO;
1020 goto exec_ic_exit;
1021 }
1022 mtip_device_reset(dd); /* recover from timeout issue */
1023 rv = -EAGAIN;
1024 goto exec_ic_exit;
1025 }
1026
1027 if (readl(port->cmd_issue[MTIP_TAG_INDEX(MTIP_TAG_INTERNAL)])
1028 & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL))) {
1029 rv = -ENXIO;
1030 if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) {
1031 mtip_device_reset(dd);
1032 rv = -EAGAIN;
1033 }
1034 }
1035 exec_ic_exit:
1036 /* Clear the allocated and active bits for the internal command. */
1037 blk_mq_free_request(rq);
1038 clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
1039 if (rv >= 0 && mtip_pause_ncq(port, fis)) {
1040 /* NCQ paused */
1041 return rv;
1042 }
1043 wake_up_interruptible(&port->svc_wait);
1044
1045 return rv;
1046 }
1047
1048 /*
1049 * Byte-swap ATA ID strings.
1050 *
1051 * ATA identify data contains strings in byte-swapped 16-bit words.
1052 * They must be swapped (on all architectures) to be usable as C strings.
1053 * This function swaps bytes in-place.
1054 *
1055 * @buf The buffer location of the string
1056 * @len The number of bytes to swap
1057 *
1058 * return value
1059 * None
1060 */
ata_swap_string(u16 * buf,unsigned int len)1061 static inline void ata_swap_string(u16 *buf, unsigned int len)
1062 {
1063 int i;
1064 for (i = 0; i < (len/2); i++)
1065 be16_to_cpus(&buf[i]);
1066 }
1067
mtip_set_timeout(struct driver_data * dd,struct host_to_dev_fis * fis,unsigned int * timeout,u8 erasemode)1068 static void mtip_set_timeout(struct driver_data *dd,
1069 struct host_to_dev_fis *fis,
1070 unsigned int *timeout, u8 erasemode)
1071 {
1072 switch (fis->command) {
1073 case ATA_CMD_DOWNLOAD_MICRO:
1074 *timeout = 120000; /* 2 minutes */
1075 break;
1076 case ATA_CMD_SEC_ERASE_UNIT:
1077 case 0xFC:
1078 if (erasemode)
1079 *timeout = ((*(dd->port->identify + 90) * 2) * 60000);
1080 else
1081 *timeout = ((*(dd->port->identify + 89) * 2) * 60000);
1082 break;
1083 case ATA_CMD_STANDBYNOW1:
1084 *timeout = 120000; /* 2 minutes */
1085 break;
1086 case 0xF7:
1087 case 0xFA:
1088 *timeout = 60000; /* 60 seconds */
1089 break;
1090 case ATA_CMD_SMART:
1091 *timeout = 15000; /* 15 seconds */
1092 break;
1093 default:
1094 *timeout = MTIP_IOCTL_CMD_TIMEOUT_MS;
1095 break;
1096 }
1097 }
1098
1099 /*
1100 * Request the device identity information.
1101 *
1102 * If a user space buffer is not specified, i.e. is NULL, the
1103 * identify information is still read from the drive and placed
1104 * into the identify data buffer (@e port->identify) in the
1105 * port data structure.
1106 * When the identify buffer contains valid identify information @e
1107 * port->identify_valid is non-zero.
1108 *
1109 * @port Pointer to the port structure.
1110 * @user_buffer A user space buffer where the identify data should be
1111 * copied.
1112 *
1113 * return value
1114 * 0 Command completed successfully.
1115 * -EFAULT An error occurred while coping data to the user buffer.
1116 * -1 Command failed.
1117 */
mtip_get_identify(struct mtip_port * port,void __user * user_buffer)1118 static int mtip_get_identify(struct mtip_port *port, void __user *user_buffer)
1119 {
1120 int rv = 0;
1121 struct host_to_dev_fis fis;
1122
1123 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
1124 return -EFAULT;
1125
1126 /* Build the FIS. */
1127 memset(&fis, 0, sizeof(struct host_to_dev_fis));
1128 fis.type = 0x27;
1129 fis.opts = 1 << 7;
1130 fis.command = ATA_CMD_ID_ATA;
1131
1132 /* Set the identify information as invalid. */
1133 port->identify_valid = 0;
1134
1135 /* Clear the identify information. */
1136 memset(port->identify, 0, sizeof(u16) * ATA_ID_WORDS);
1137
1138 /* Execute the command. */
1139 if (mtip_exec_internal_command(port,
1140 &fis,
1141 5,
1142 port->identify_dma,
1143 sizeof(u16) * ATA_ID_WORDS,
1144 0,
1145 MTIP_INT_CMD_TIMEOUT_MS)
1146 < 0) {
1147 rv = -1;
1148 goto out;
1149 }
1150
1151 /*
1152 * Perform any necessary byte-swapping. Yes, the kernel does in fact
1153 * perform field-sensitive swapping on the string fields.
1154 * See the kernel use of ata_id_string() for proof of this.
1155 */
1156 #ifdef __LITTLE_ENDIAN
1157 ata_swap_string(port->identify + 27, 40); /* model string*/
1158 ata_swap_string(port->identify + 23, 8); /* firmware string*/
1159 ata_swap_string(port->identify + 10, 20); /* serial# string*/
1160 #else
1161 {
1162 int i;
1163 for (i = 0; i < ATA_ID_WORDS; i++)
1164 port->identify[i] = le16_to_cpu(port->identify[i]);
1165 }
1166 #endif
1167
1168 /* Check security locked state */
1169 if (port->identify[128] & 0x4)
1170 set_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag);
1171 else
1172 clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag);
1173
1174 /* Set the identify buffer as valid. */
1175 port->identify_valid = 1;
1176
1177 if (user_buffer) {
1178 if (copy_to_user(
1179 user_buffer,
1180 port->identify,
1181 ATA_ID_WORDS * sizeof(u16))) {
1182 rv = -EFAULT;
1183 goto out;
1184 }
1185 }
1186
1187 out:
1188 return rv;
1189 }
1190
1191 /*
1192 * Issue a standby immediate command to the device.
1193 *
1194 * @port Pointer to the port structure.
1195 *
1196 * return value
1197 * 0 Command was executed successfully.
1198 * -1 An error occurred while executing the command.
1199 */
mtip_standby_immediate(struct mtip_port * port)1200 static int mtip_standby_immediate(struct mtip_port *port)
1201 {
1202 int rv;
1203 struct host_to_dev_fis fis;
1204 unsigned long __maybe_unused start;
1205 unsigned int timeout;
1206
1207 /* Build the FIS. */
1208 memset(&fis, 0, sizeof(struct host_to_dev_fis));
1209 fis.type = 0x27;
1210 fis.opts = 1 << 7;
1211 fis.command = ATA_CMD_STANDBYNOW1;
1212
1213 mtip_set_timeout(port->dd, &fis, &timeout, 0);
1214
1215 start = jiffies;
1216 rv = mtip_exec_internal_command(port,
1217 &fis,
1218 5,
1219 0,
1220 0,
1221 0,
1222 timeout);
1223 dbg_printk(MTIP_DRV_NAME "Time taken to complete standby cmd: %d ms\n",
1224 jiffies_to_msecs(jiffies - start));
1225 if (rv)
1226 dev_warn(&port->dd->pdev->dev,
1227 "STANDBY IMMEDIATE command failed.\n");
1228
1229 return rv;
1230 }
1231
1232 /*
1233 * Issue a READ LOG EXT command to the device.
1234 *
1235 * @port pointer to the port structure.
1236 * @page page number to fetch
1237 * @buffer pointer to buffer
1238 * @buffer_dma dma address corresponding to @buffer
1239 * @sectors page length to fetch, in sectors
1240 *
1241 * return value
1242 * @rv return value from mtip_exec_internal_command()
1243 */
mtip_read_log_page(struct mtip_port * port,u8 page,u16 * buffer,dma_addr_t buffer_dma,unsigned int sectors)1244 static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer,
1245 dma_addr_t buffer_dma, unsigned int sectors)
1246 {
1247 struct host_to_dev_fis fis;
1248
1249 memset(&fis, 0, sizeof(struct host_to_dev_fis));
1250 fis.type = 0x27;
1251 fis.opts = 1 << 7;
1252 fis.command = ATA_CMD_READ_LOG_EXT;
1253 fis.sect_count = sectors & 0xFF;
1254 fis.sect_cnt_ex = (sectors >> 8) & 0xFF;
1255 fis.lba_low = page;
1256 fis.lba_mid = 0;
1257 fis.device = ATA_DEVICE_OBS;
1258
1259 memset(buffer, 0, sectors * ATA_SECT_SIZE);
1260
1261 return mtip_exec_internal_command(port,
1262 &fis,
1263 5,
1264 buffer_dma,
1265 sectors * ATA_SECT_SIZE,
1266 0,
1267 MTIP_INT_CMD_TIMEOUT_MS);
1268 }
1269
1270 /*
1271 * Issue a SMART READ DATA command to the device.
1272 *
1273 * @port pointer to the port structure.
1274 * @buffer pointer to buffer
1275 * @buffer_dma dma address corresponding to @buffer
1276 *
1277 * return value
1278 * @rv return value from mtip_exec_internal_command()
1279 */
mtip_get_smart_data(struct mtip_port * port,u8 * buffer,dma_addr_t buffer_dma)1280 static int mtip_get_smart_data(struct mtip_port *port, u8 *buffer,
1281 dma_addr_t buffer_dma)
1282 {
1283 struct host_to_dev_fis fis;
1284
1285 memset(&fis, 0, sizeof(struct host_to_dev_fis));
1286 fis.type = 0x27;
1287 fis.opts = 1 << 7;
1288 fis.command = ATA_CMD_SMART;
1289 fis.features = 0xD0;
1290 fis.sect_count = 1;
1291 fis.lba_mid = 0x4F;
1292 fis.lba_hi = 0xC2;
1293 fis.device = ATA_DEVICE_OBS;
1294
1295 return mtip_exec_internal_command(port,
1296 &fis,
1297 5,
1298 buffer_dma,
1299 ATA_SECT_SIZE,
1300 0,
1301 15000);
1302 }
1303
1304 /*
1305 * Get the value of a smart attribute
1306 *
1307 * @port pointer to the port structure
1308 * @id attribute number
1309 * @attrib pointer to return attrib information corresponding to @id
1310 *
1311 * return value
1312 * -EINVAL NULL buffer passed or unsupported attribute @id.
1313 * -EPERM Identify data not valid, SMART not supported or not enabled
1314 */
mtip_get_smart_attr(struct mtip_port * port,unsigned int id,struct smart_attr * attrib)1315 static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
1316 struct smart_attr *attrib)
1317 {
1318 int rv, i;
1319 struct smart_attr *pattr;
1320
1321 if (!attrib)
1322 return -EINVAL;
1323
1324 if (!port->identify_valid) {
1325 dev_warn(&port->dd->pdev->dev, "IDENTIFY DATA not valid\n");
1326 return -EPERM;
1327 }
1328 if (!(port->identify[82] & 0x1)) {
1329 dev_warn(&port->dd->pdev->dev, "SMART not supported\n");
1330 return -EPERM;
1331 }
1332 if (!(port->identify[85] & 0x1)) {
1333 dev_warn(&port->dd->pdev->dev, "SMART not enabled\n");
1334 return -EPERM;
1335 }
1336
1337 memset(port->smart_buf, 0, ATA_SECT_SIZE);
1338 rv = mtip_get_smart_data(port, port->smart_buf, port->smart_buf_dma);
1339 if (rv) {
1340 dev_warn(&port->dd->pdev->dev, "Failed to ge SMART data\n");
1341 return rv;
1342 }
1343
1344 pattr = (struct smart_attr *)(port->smart_buf + 2);
1345 for (i = 0; i < 29; i++, pattr++)
1346 if (pattr->attr_id == id) {
1347 memcpy(attrib, pattr, sizeof(struct smart_attr));
1348 break;
1349 }
1350
1351 if (i == 29) {
1352 dev_warn(&port->dd->pdev->dev,
1353 "Query for invalid SMART attribute ID\n");
1354 rv = -EINVAL;
1355 }
1356
1357 return rv;
1358 }
1359
1360 /*
1361 * Get the drive capacity.
1362 *
1363 * @dd Pointer to the device data structure.
1364 * @sectors Pointer to the variable that will receive the sector count.
1365 *
1366 * return value
1367 * 1 Capacity was returned successfully.
1368 * 0 The identify information is invalid.
1369 */
mtip_hw_get_capacity(struct driver_data * dd,sector_t * sectors)1370 static bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors)
1371 {
1372 struct mtip_port *port = dd->port;
1373 u64 total, raw0, raw1, raw2, raw3;
1374 raw0 = port->identify[100];
1375 raw1 = port->identify[101];
1376 raw2 = port->identify[102];
1377 raw3 = port->identify[103];
1378 total = raw0 | raw1<<16 | raw2<<32 | raw3<<48;
1379 *sectors = total;
1380 return (bool) !!port->identify_valid;
1381 }
1382
1383 /*
1384 * Display the identify command data.
1385 *
1386 * @port Pointer to the port data structure.
1387 *
1388 * return value
1389 * None
1390 */
mtip_dump_identify(struct mtip_port * port)1391 static void mtip_dump_identify(struct mtip_port *port)
1392 {
1393 sector_t sectors;
1394 unsigned short revid;
1395 char cbuf[42];
1396
1397 if (!port->identify_valid)
1398 return;
1399
1400 strscpy(cbuf, (char *)(port->identify + 10), 21);
1401 dev_info(&port->dd->pdev->dev,
1402 "Serial No.: %s\n", cbuf);
1403
1404 strscpy(cbuf, (char *)(port->identify + 23), 9);
1405 dev_info(&port->dd->pdev->dev,
1406 "Firmware Ver.: %s\n", cbuf);
1407
1408 strscpy(cbuf, (char *)(port->identify + 27), 41);
1409 dev_info(&port->dd->pdev->dev, "Model: %s\n", cbuf);
1410
1411 dev_info(&port->dd->pdev->dev, "Security: %04x %s\n",
1412 port->identify[128],
1413 port->identify[128] & 0x4 ? "(LOCKED)" : "");
1414
1415 if (mtip_hw_get_capacity(port->dd, §ors))
1416 dev_info(&port->dd->pdev->dev,
1417 "Capacity: %llu sectors (%llu MB)\n",
1418 (u64)sectors,
1419 ((u64)sectors) * ATA_SECT_SIZE >> 20);
1420
1421 pci_read_config_word(port->dd->pdev, PCI_REVISION_ID, &revid);
1422 switch (revid & 0xFF) {
1423 case 0x1:
1424 strscpy(cbuf, "A0", 3);
1425 break;
1426 case 0x3:
1427 strscpy(cbuf, "A2", 3);
1428 break;
1429 default:
1430 strscpy(cbuf, "?", 2);
1431 break;
1432 }
1433 dev_info(&port->dd->pdev->dev,
1434 "Card Type: %s\n", cbuf);
1435 }
1436
1437 /*
1438 * Map the commands scatter list into the command table.
1439 *
1440 * @command Pointer to the command.
1441 * @nents Number of scatter list entries.
1442 *
1443 * return value
1444 * None
1445 */
fill_command_sg(struct driver_data * dd,struct mtip_cmd * command,int nents)1446 static inline void fill_command_sg(struct driver_data *dd,
1447 struct mtip_cmd *command,
1448 int nents)
1449 {
1450 int n;
1451 unsigned int dma_len;
1452 struct mtip_cmd_sg *command_sg;
1453 struct scatterlist *sg;
1454
1455 command_sg = command->command + AHCI_CMD_TBL_HDR_SZ;
1456
1457 for_each_sg(command->sg, sg, nents, n) {
1458 dma_len = sg_dma_len(sg);
1459 if (dma_len > 0x400000)
1460 dev_err(&dd->pdev->dev,
1461 "DMA segment length truncated\n");
1462 command_sg->info = cpu_to_le32((dma_len-1) & 0x3FFFFF);
1463 command_sg->dba = cpu_to_le32(sg_dma_address(sg));
1464 command_sg->dba_upper =
1465 cpu_to_le32((sg_dma_address(sg) >> 16) >> 16);
1466 command_sg++;
1467 }
1468 }
1469
1470 /*
1471 * @brief Execute a drive command.
1472 *
1473 * return value 0 The command completed successfully.
1474 * return value -1 An error occurred while executing the command.
1475 */
exec_drive_task(struct mtip_port * port,u8 * command)1476 static int exec_drive_task(struct mtip_port *port, u8 *command)
1477 {
1478 struct host_to_dev_fis fis;
1479 struct host_to_dev_fis *reply = (port->rxfis + RX_FIS_D2H_REG);
1480 unsigned int to;
1481
1482 /* Build the FIS. */
1483 memset(&fis, 0, sizeof(struct host_to_dev_fis));
1484 fis.type = 0x27;
1485 fis.opts = 1 << 7;
1486 fis.command = command[0];
1487 fis.features = command[1];
1488 fis.sect_count = command[2];
1489 fis.sector = command[3];
1490 fis.cyl_low = command[4];
1491 fis.cyl_hi = command[5];
1492 fis.device = command[6] & ~0x10; /* Clear the dev bit*/
1493
1494 mtip_set_timeout(port->dd, &fis, &to, 0);
1495
1496 dbg_printk(MTIP_DRV_NAME " %s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n",
1497 __func__,
1498 command[0],
1499 command[1],
1500 command[2],
1501 command[3],
1502 command[4],
1503 command[5],
1504 command[6]);
1505
1506 /* Execute the command. */
1507 if (mtip_exec_internal_command(port,
1508 &fis,
1509 5,
1510 0,
1511 0,
1512 0,
1513 to) < 0) {
1514 return -1;
1515 }
1516
1517 command[0] = reply->command; /* Status*/
1518 command[1] = reply->features; /* Error*/
1519 command[4] = reply->cyl_low;
1520 command[5] = reply->cyl_hi;
1521
1522 dbg_printk(MTIP_DRV_NAME " %s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n",
1523 __func__,
1524 command[0],
1525 command[1],
1526 command[4],
1527 command[5]);
1528
1529 return 0;
1530 }
1531
1532 /*
1533 * @brief Execute a drive command.
1534 *
1535 * @param port Pointer to the port data structure.
1536 * @param command Pointer to the user specified command parameters.
1537 * @param user_buffer Pointer to the user space buffer where read sector
1538 * data should be copied.
1539 *
1540 * return value 0 The command completed successfully.
1541 * return value -EFAULT An error occurred while copying the completion
1542 * data to the user space buffer.
1543 * return value -1 An error occurred while executing the command.
1544 */
exec_drive_command(struct mtip_port * port,u8 * command,void __user * user_buffer)1545 static int exec_drive_command(struct mtip_port *port, u8 *command,
1546 void __user *user_buffer)
1547 {
1548 struct host_to_dev_fis fis;
1549 struct host_to_dev_fis *reply;
1550 u8 *buf = NULL;
1551 dma_addr_t dma_addr = 0;
1552 int rv = 0, xfer_sz = command[3];
1553 unsigned int to;
1554
1555 if (xfer_sz) {
1556 if (!user_buffer)
1557 return -EFAULT;
1558
1559 buf = dma_alloc_coherent(&port->dd->pdev->dev,
1560 ATA_SECT_SIZE * xfer_sz,
1561 &dma_addr,
1562 GFP_KERNEL);
1563 if (!buf) {
1564 dev_err(&port->dd->pdev->dev,
1565 "Memory allocation failed (%d bytes)\n",
1566 ATA_SECT_SIZE * xfer_sz);
1567 return -ENOMEM;
1568 }
1569 }
1570
1571 /* Build the FIS. */
1572 memset(&fis, 0, sizeof(struct host_to_dev_fis));
1573 fis.type = 0x27;
1574 fis.opts = 1 << 7;
1575 fis.command = command[0];
1576 fis.features = command[2];
1577 fis.sect_count = command[3];
1578 if (fis.command == ATA_CMD_SMART) {
1579 fis.sector = command[1];
1580 fis.cyl_low = 0x4F;
1581 fis.cyl_hi = 0xC2;
1582 }
1583
1584 mtip_set_timeout(port->dd, &fis, &to, 0);
1585
1586 if (xfer_sz)
1587 reply = (port->rxfis + RX_FIS_PIO_SETUP);
1588 else
1589 reply = (port->rxfis + RX_FIS_D2H_REG);
1590
1591 dbg_printk(MTIP_DRV_NAME
1592 " %s: User Command: cmd %x, sect %x, "
1593 "feat %x, sectcnt %x\n",
1594 __func__,
1595 command[0],
1596 command[1],
1597 command[2],
1598 command[3]);
1599
1600 /* Execute the command. */
1601 if (mtip_exec_internal_command(port,
1602 &fis,
1603 5,
1604 (xfer_sz ? dma_addr : 0),
1605 (xfer_sz ? ATA_SECT_SIZE * xfer_sz : 0),
1606 0,
1607 to)
1608 < 0) {
1609 rv = -EFAULT;
1610 goto exit_drive_command;
1611 }
1612
1613 /* Collect the completion status. */
1614 command[0] = reply->command; /* Status*/
1615 command[1] = reply->features; /* Error*/
1616 command[2] = reply->sect_count;
1617
1618 dbg_printk(MTIP_DRV_NAME
1619 " %s: Completion Status: stat %x, "
1620 "err %x, nsect %x\n",
1621 __func__,
1622 command[0],
1623 command[1],
1624 command[2]);
1625
1626 if (xfer_sz) {
1627 if (copy_to_user(user_buffer,
1628 buf,
1629 ATA_SECT_SIZE * command[3])) {
1630 rv = -EFAULT;
1631 goto exit_drive_command;
1632 }
1633 }
1634 exit_drive_command:
1635 if (buf)
1636 dma_free_coherent(&port->dd->pdev->dev,
1637 ATA_SECT_SIZE * xfer_sz, buf, dma_addr);
1638 return rv;
1639 }
1640
1641 /*
1642 * Indicates whether a command has a single sector payload.
1643 *
1644 * @command passed to the device to perform the certain event.
1645 * @features passed to the device to perform the certain event.
1646 *
1647 * return value
1648 * 1 command is one that always has a single sector payload,
1649 * regardless of the value in the Sector Count field.
1650 * 0 otherwise
1651 *
1652 */
implicit_sector(unsigned char command,unsigned char features)1653 static unsigned int implicit_sector(unsigned char command,
1654 unsigned char features)
1655 {
1656 unsigned int rv = 0;
1657
1658 /* list of commands that have an implicit sector count of 1 */
1659 switch (command) {
1660 case ATA_CMD_SEC_SET_PASS:
1661 case ATA_CMD_SEC_UNLOCK:
1662 case ATA_CMD_SEC_ERASE_PREP:
1663 case ATA_CMD_SEC_ERASE_UNIT:
1664 case ATA_CMD_SEC_FREEZE_LOCK:
1665 case ATA_CMD_SEC_DISABLE_PASS:
1666 case ATA_CMD_PMP_READ:
1667 case ATA_CMD_PMP_WRITE:
1668 rv = 1;
1669 break;
1670 case ATA_CMD_SET_MAX:
1671 if (features == ATA_SET_MAX_UNLOCK)
1672 rv = 1;
1673 break;
1674 case ATA_CMD_SMART:
1675 if ((features == ATA_SMART_READ_VALUES) ||
1676 (features == ATA_SMART_READ_THRESHOLDS))
1677 rv = 1;
1678 break;
1679 case ATA_CMD_CONF_OVERLAY:
1680 if ((features == ATA_DCO_IDENTIFY) ||
1681 (features == ATA_DCO_SET))
1682 rv = 1;
1683 break;
1684 }
1685 return rv;
1686 }
1687
1688 /*
1689 * Executes a taskfile
1690 * See ide_taskfile_ioctl() for derivation
1691 */
exec_drive_taskfile(struct driver_data * dd,void __user * buf,ide_task_request_t * req_task,int outtotal)1692 static int exec_drive_taskfile(struct driver_data *dd,
1693 void __user *buf,
1694 ide_task_request_t *req_task,
1695 int outtotal)
1696 {
1697 struct host_to_dev_fis fis;
1698 struct host_to_dev_fis *reply;
1699 u8 *outbuf = NULL;
1700 u8 *inbuf = NULL;
1701 dma_addr_t outbuf_dma = 0;
1702 dma_addr_t inbuf_dma = 0;
1703 dma_addr_t dma_buffer = 0;
1704 int err = 0;
1705 unsigned int taskin = 0;
1706 unsigned int taskout = 0;
1707 u8 nsect = 0;
1708 unsigned int timeout;
1709 unsigned int force_single_sector;
1710 unsigned int transfer_size;
1711 unsigned long task_file_data;
1712 int intotal = outtotal + req_task->out_size;
1713 int erasemode = 0;
1714
1715 taskout = req_task->out_size;
1716 taskin = req_task->in_size;
1717 /* 130560 = 512 * 0xFF*/
1718 if (taskin > 130560 || taskout > 130560)
1719 return -EINVAL;
1720
1721 if (taskout) {
1722 outbuf = memdup_user(buf + outtotal, taskout);
1723 if (IS_ERR(outbuf))
1724 return PTR_ERR(outbuf);
1725
1726 outbuf_dma = dma_map_single(&dd->pdev->dev, outbuf,
1727 taskout, DMA_TO_DEVICE);
1728 if (dma_mapping_error(&dd->pdev->dev, outbuf_dma)) {
1729 err = -ENOMEM;
1730 goto abort;
1731 }
1732 dma_buffer = outbuf_dma;
1733 }
1734
1735 if (taskin) {
1736 inbuf = memdup_user(buf + intotal, taskin);
1737 if (IS_ERR(inbuf)) {
1738 err = PTR_ERR(inbuf);
1739 inbuf = NULL;
1740 goto abort;
1741 }
1742 inbuf_dma = dma_map_single(&dd->pdev->dev, inbuf,
1743 taskin, DMA_FROM_DEVICE);
1744 if (dma_mapping_error(&dd->pdev->dev, inbuf_dma)) {
1745 err = -ENOMEM;
1746 goto abort;
1747 }
1748 dma_buffer = inbuf_dma;
1749 }
1750
1751 /* only supports PIO and non-data commands from this ioctl. */
1752 switch (req_task->data_phase) {
1753 case TASKFILE_OUT:
1754 nsect = taskout / ATA_SECT_SIZE;
1755 reply = (dd->port->rxfis + RX_FIS_PIO_SETUP);
1756 break;
1757 case TASKFILE_IN:
1758 reply = (dd->port->rxfis + RX_FIS_PIO_SETUP);
1759 break;
1760 case TASKFILE_NO_DATA:
1761 reply = (dd->port->rxfis + RX_FIS_D2H_REG);
1762 break;
1763 default:
1764 err = -EINVAL;
1765 goto abort;
1766 }
1767
1768 /* Build the FIS. */
1769 memset(&fis, 0, sizeof(struct host_to_dev_fis));
1770
1771 fis.type = 0x27;
1772 fis.opts = 1 << 7;
1773 fis.command = req_task->io_ports[7];
1774 fis.features = req_task->io_ports[1];
1775 fis.sect_count = req_task->io_ports[2];
1776 fis.lba_low = req_task->io_ports[3];
1777 fis.lba_mid = req_task->io_ports[4];
1778 fis.lba_hi = req_task->io_ports[5];
1779 /* Clear the dev bit*/
1780 fis.device = req_task->io_ports[6] & ~0x10;
1781
1782 if ((req_task->in_flags.all == 0) && (req_task->out_flags.all & 1)) {
1783 req_task->in_flags.all =
1784 IDE_TASKFILE_STD_IN_FLAGS |
1785 (IDE_HOB_STD_IN_FLAGS << 8);
1786 fis.lba_low_ex = req_task->hob_ports[3];
1787 fis.lba_mid_ex = req_task->hob_ports[4];
1788 fis.lba_hi_ex = req_task->hob_ports[5];
1789 fis.features_ex = req_task->hob_ports[1];
1790 fis.sect_cnt_ex = req_task->hob_ports[2];
1791
1792 } else {
1793 req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS;
1794 }
1795
1796 force_single_sector = implicit_sector(fis.command, fis.features);
1797
1798 if ((taskin || taskout) && (!fis.sect_count)) {
1799 if (nsect)
1800 fis.sect_count = nsect;
1801 else {
1802 if (!force_single_sector) {
1803 dev_warn(&dd->pdev->dev,
1804 "data movement but "
1805 "sect_count is 0\n");
1806 err = -EINVAL;
1807 goto abort;
1808 }
1809 }
1810 }
1811
1812 dbg_printk(MTIP_DRV_NAME
1813 " %s: cmd %x, feat %x, nsect %x,"
1814 " sect/lbal %x, lcyl/lbam %x, hcyl/lbah %x,"
1815 " head/dev %x\n",
1816 __func__,
1817 fis.command,
1818 fis.features,
1819 fis.sect_count,
1820 fis.lba_low,
1821 fis.lba_mid,
1822 fis.lba_hi,
1823 fis.device);
1824
1825 /* check for erase mode support during secure erase.*/
1826 if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf &&
1827 (outbuf[0] & MTIP_SEC_ERASE_MODE)) {
1828 erasemode = 1;
1829 }
1830
1831 mtip_set_timeout(dd, &fis, &timeout, erasemode);
1832
1833 /* Determine the correct transfer size.*/
1834 if (force_single_sector)
1835 transfer_size = ATA_SECT_SIZE;
1836 else
1837 transfer_size = ATA_SECT_SIZE * fis.sect_count;
1838
1839 /* Execute the command.*/
1840 if (mtip_exec_internal_command(dd->port,
1841 &fis,
1842 5,
1843 dma_buffer,
1844 transfer_size,
1845 0,
1846 timeout) < 0) {
1847 err = -EIO;
1848 goto abort;
1849 }
1850
1851 task_file_data = readl(dd->port->mmio+PORT_TFDATA);
1852
1853 if ((req_task->data_phase == TASKFILE_IN) && !(task_file_data & 1)) {
1854 reply = dd->port->rxfis + RX_FIS_PIO_SETUP;
1855 req_task->io_ports[7] = reply->control;
1856 } else {
1857 reply = dd->port->rxfis + RX_FIS_D2H_REG;
1858 req_task->io_ports[7] = reply->command;
1859 }
1860
1861 /* reclaim the DMA buffers.*/
1862 if (inbuf_dma)
1863 dma_unmap_single(&dd->pdev->dev, inbuf_dma, taskin,
1864 DMA_FROM_DEVICE);
1865 if (outbuf_dma)
1866 dma_unmap_single(&dd->pdev->dev, outbuf_dma, taskout,
1867 DMA_TO_DEVICE);
1868 inbuf_dma = 0;
1869 outbuf_dma = 0;
1870
1871 /* return the ATA registers to the caller.*/
1872 req_task->io_ports[1] = reply->features;
1873 req_task->io_ports[2] = reply->sect_count;
1874 req_task->io_ports[3] = reply->lba_low;
1875 req_task->io_ports[4] = reply->lba_mid;
1876 req_task->io_ports[5] = reply->lba_hi;
1877 req_task->io_ports[6] = reply->device;
1878
1879 if (req_task->out_flags.all & 1) {
1880
1881 req_task->hob_ports[3] = reply->lba_low_ex;
1882 req_task->hob_ports[4] = reply->lba_mid_ex;
1883 req_task->hob_ports[5] = reply->lba_hi_ex;
1884 req_task->hob_ports[1] = reply->features_ex;
1885 req_task->hob_ports[2] = reply->sect_cnt_ex;
1886 }
1887 dbg_printk(MTIP_DRV_NAME
1888 " %s: Completion: stat %x,"
1889 "err %x, sect_cnt %x, lbalo %x,"
1890 "lbamid %x, lbahi %x, dev %x\n",
1891 __func__,
1892 req_task->io_ports[7],
1893 req_task->io_ports[1],
1894 req_task->io_ports[2],
1895 req_task->io_ports[3],
1896 req_task->io_ports[4],
1897 req_task->io_ports[5],
1898 req_task->io_ports[6]);
1899
1900 if (taskout) {
1901 if (copy_to_user(buf + outtotal, outbuf, taskout)) {
1902 err = -EFAULT;
1903 goto abort;
1904 }
1905 }
1906 if (taskin) {
1907 if (copy_to_user(buf + intotal, inbuf, taskin)) {
1908 err = -EFAULT;
1909 goto abort;
1910 }
1911 }
1912 abort:
1913 if (inbuf_dma)
1914 dma_unmap_single(&dd->pdev->dev, inbuf_dma, taskin,
1915 DMA_FROM_DEVICE);
1916 if (outbuf_dma)
1917 dma_unmap_single(&dd->pdev->dev, outbuf_dma, taskout,
1918 DMA_TO_DEVICE);
1919 kfree(outbuf);
1920 kfree(inbuf);
1921
1922 return err;
1923 }
1924
1925 /*
1926 * Handle IOCTL calls from the Block Layer.
1927 *
1928 * This function is called by the Block Layer when it receives an IOCTL
1929 * command that it does not understand. If the IOCTL command is not supported
1930 * this function returns -ENOTTY.
1931 *
1932 * @dd Pointer to the driver data structure.
1933 * @cmd IOCTL command passed from the Block Layer.
1934 * @arg IOCTL argument passed from the Block Layer.
1935 *
1936 * return value
1937 * 0 The IOCTL completed successfully.
1938 * -ENOTTY The specified command is not supported.
1939 * -EFAULT An error occurred copying data to a user space buffer.
1940 * -EIO An error occurred while executing the command.
1941 */
mtip_hw_ioctl(struct driver_data * dd,unsigned int cmd,unsigned long arg)1942 static int mtip_hw_ioctl(struct driver_data *dd, unsigned int cmd,
1943 unsigned long arg)
1944 {
1945 switch (cmd) {
1946 case HDIO_GET_IDENTITY:
1947 {
1948 if (copy_to_user((void __user *)arg, dd->port->identify,
1949 sizeof(u16) * ATA_ID_WORDS))
1950 return -EFAULT;
1951 break;
1952 }
1953 case HDIO_DRIVE_CMD:
1954 {
1955 u8 drive_command[4];
1956
1957 /* Copy the user command info to our buffer. */
1958 if (copy_from_user(drive_command,
1959 (void __user *) arg,
1960 sizeof(drive_command)))
1961 return -EFAULT;
1962
1963 /* Execute the drive command. */
1964 if (exec_drive_command(dd->port,
1965 drive_command,
1966 (void __user *) (arg+4)))
1967 return -EIO;
1968
1969 /* Copy the status back to the users buffer. */
1970 if (copy_to_user((void __user *) arg,
1971 drive_command,
1972 sizeof(drive_command)))
1973 return -EFAULT;
1974
1975 break;
1976 }
1977 case HDIO_DRIVE_TASK:
1978 {
1979 u8 drive_command[7];
1980
1981 /* Copy the user command info to our buffer. */
1982 if (copy_from_user(drive_command,
1983 (void __user *) arg,
1984 sizeof(drive_command)))
1985 return -EFAULT;
1986
1987 /* Execute the drive command. */
1988 if (exec_drive_task(dd->port, drive_command))
1989 return -EIO;
1990
1991 /* Copy the status back to the users buffer. */
1992 if (copy_to_user((void __user *) arg,
1993 drive_command,
1994 sizeof(drive_command)))
1995 return -EFAULT;
1996
1997 break;
1998 }
1999 case HDIO_DRIVE_TASKFILE: {
2000 ide_task_request_t req_task;
2001 int ret, outtotal;
2002
2003 if (copy_from_user(&req_task, (void __user *) arg,
2004 sizeof(req_task)))
2005 return -EFAULT;
2006
2007 outtotal = sizeof(req_task);
2008
2009 ret = exec_drive_taskfile(dd, (void __user *) arg,
2010 &req_task, outtotal);
2011
2012 if (copy_to_user((void __user *) arg, &req_task,
2013 sizeof(req_task)))
2014 return -EFAULT;
2015
2016 return ret;
2017 }
2018
2019 default:
2020 return -EINVAL;
2021 }
2022 return 0;
2023 }
2024
2025 /*
2026 * Submit an IO to the hw
2027 *
2028 * This function is called by the block layer to issue an io
2029 * to the device. Upon completion, the callback function will
2030 * be called with the data parameter passed as the callback data.
2031 *
2032 * @dd Pointer to the driver data structure.
2033 * @start First sector to read.
2034 * @nsect Number of sectors to read.
2035 * @tag The tag of this read command.
2036 * @callback Pointer to the function that should be called
2037 * when the read completes.
2038 * @data Callback data passed to the callback function
2039 * when the read completes.
2040 * @dir Direction (read or write)
2041 *
2042 * return value
2043 * None
2044 */
mtip_hw_submit_io(struct driver_data * dd,struct request * rq,struct mtip_cmd * command,struct blk_mq_hw_ctx * hctx)2045 static void mtip_hw_submit_io(struct driver_data *dd, struct request *rq,
2046 struct mtip_cmd *command,
2047 struct blk_mq_hw_ctx *hctx)
2048 {
2049 struct mtip_cmd_hdr *hdr =
2050 dd->port->command_list + sizeof(struct mtip_cmd_hdr) * rq->tag;
2051 struct host_to_dev_fis *fis;
2052 struct mtip_port *port = dd->port;
2053 int dma_dir = rq_data_dir(rq) == READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
2054 u64 start = blk_rq_pos(rq);
2055 unsigned int nsect = blk_rq_sectors(rq);
2056 unsigned int nents;
2057
2058 /* Map the scatter list for DMA access */
2059 nents = blk_rq_map_sg(hctx->queue, rq, command->sg);
2060 nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir);
2061
2062 prefetch(&port->flags);
2063
2064 command->scatter_ents = nents;
2065
2066 /*
2067 * The number of retries for this command before it is
2068 * reported as a failure to the upper layers.
2069 */
2070 command->retries = MTIP_MAX_RETRIES;
2071
2072 /* Fill out fis */
2073 fis = command->command;
2074 fis->type = 0x27;
2075 fis->opts = 1 << 7;
2076 if (dma_dir == DMA_FROM_DEVICE)
2077 fis->command = ATA_CMD_FPDMA_READ;
2078 else
2079 fis->command = ATA_CMD_FPDMA_WRITE;
2080 fis->lba_low = start & 0xFF;
2081 fis->lba_mid = (start >> 8) & 0xFF;
2082 fis->lba_hi = (start >> 16) & 0xFF;
2083 fis->lba_low_ex = (start >> 24) & 0xFF;
2084 fis->lba_mid_ex = (start >> 32) & 0xFF;
2085 fis->lba_hi_ex = (start >> 40) & 0xFF;
2086 fis->device = 1 << 6;
2087 fis->features = nsect & 0xFF;
2088 fis->features_ex = (nsect >> 8) & 0xFF;
2089 fis->sect_count = ((rq->tag << 3) | (rq->tag >> 5));
2090 fis->sect_cnt_ex = 0;
2091 fis->control = 0;
2092 fis->res2 = 0;
2093 fis->res3 = 0;
2094 fill_command_sg(dd, command, nents);
2095
2096 if (unlikely(command->unaligned))
2097 fis->device |= 1 << 7;
2098
2099 /* Populate the command header */
2100 hdr->ctba = cpu_to_le32(command->command_dma & 0xFFFFFFFF);
2101 if (test_bit(MTIP_PF_HOST_CAP_64, &dd->port->flags))
2102 hdr->ctbau = cpu_to_le32((command->command_dma >> 16) >> 16);
2103 hdr->opts = cpu_to_le32((nents << 16) | 5 | AHCI_CMD_PREFETCH);
2104 hdr->byte_count = 0;
2105
2106 command->direction = dma_dir;
2107
2108 /*
2109 * To prevent this command from being issued
2110 * if an internal command is in progress or error handling is active.
2111 */
2112 if (unlikely(port->flags & MTIP_PF_PAUSE_IO)) {
2113 set_bit(rq->tag, port->cmds_to_issue);
2114 set_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags);
2115 return;
2116 }
2117
2118 /* Issue the command to the hardware */
2119 mtip_issue_ncq_command(port, rq->tag);
2120 }
2121
2122 /*
2123 * Sysfs status dump.
2124 *
2125 * @dev Pointer to the device structure, passed by the kernrel.
2126 * @attr Pointer to the device_attribute structure passed by the kernel.
2127 * @buf Pointer to the char buffer that will receive the stats info.
2128 *
2129 * return value
2130 * The size, in bytes, of the data copied into buf.
2131 */
mtip_hw_show_status(struct device * dev,struct device_attribute * attr,char * buf)2132 static ssize_t mtip_hw_show_status(struct device *dev,
2133 struct device_attribute *attr,
2134 char *buf)
2135 {
2136 struct driver_data *dd = dev_to_disk(dev)->private_data;
2137 int size = 0;
2138
2139 if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))
2140 size += sprintf(buf, "%s", "thermal_shutdown\n");
2141 else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag))
2142 size += sprintf(buf, "%s", "write_protect\n");
2143 else
2144 size += sprintf(buf, "%s", "online\n");
2145
2146 return size;
2147 }
2148
2149 static DEVICE_ATTR(status, 0444, mtip_hw_show_status, NULL);
2150
2151 static struct attribute *mtip_disk_attrs[] = {
2152 &dev_attr_status.attr,
2153 NULL,
2154 };
2155
2156 static const struct attribute_group mtip_disk_attr_group = {
2157 .attrs = mtip_disk_attrs,
2158 };
2159
2160 static const struct attribute_group *mtip_disk_attr_groups[] = {
2161 &mtip_disk_attr_group,
2162 NULL,
2163 };
2164
mtip_hw_read_registers(struct file * f,char __user * ubuf,size_t len,loff_t * offset)2165 static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf,
2166 size_t len, loff_t *offset)
2167 {
2168 struct driver_data *dd = (struct driver_data *)f->private_data;
2169 char *buf;
2170 u32 group_allocated;
2171 int size = *offset;
2172 int n, rv = 0;
2173
2174 if (!len || size)
2175 return 0;
2176
2177 buf = kzalloc(MTIP_DFS_MAX_BUF_SIZE, GFP_KERNEL);
2178 if (!buf)
2179 return -ENOMEM;
2180
2181 size += sprintf(&buf[size], "H/ S ACTive : [ 0x");
2182
2183 for (n = dd->slot_groups-1; n >= 0; n--)
2184 size += sprintf(&buf[size], "%08X ",
2185 readl(dd->port->s_active[n]));
2186
2187 size += sprintf(&buf[size], "]\n");
2188 size += sprintf(&buf[size], "H/ Command Issue : [ 0x");
2189
2190 for (n = dd->slot_groups-1; n >= 0; n--)
2191 size += sprintf(&buf[size], "%08X ",
2192 readl(dd->port->cmd_issue[n]));
2193
2194 size += sprintf(&buf[size], "]\n");
2195 size += sprintf(&buf[size], "H/ Completed : [ 0x");
2196
2197 for (n = dd->slot_groups-1; n >= 0; n--)
2198 size += sprintf(&buf[size], "%08X ",
2199 readl(dd->port->completed[n]));
2200
2201 size += sprintf(&buf[size], "]\n");
2202 size += sprintf(&buf[size], "H/ PORT IRQ STAT : [ 0x%08X ]\n",
2203 readl(dd->port->mmio + PORT_IRQ_STAT));
2204 size += sprintf(&buf[size], "H/ HOST IRQ STAT : [ 0x%08X ]\n",
2205 readl(dd->mmio + HOST_IRQ_STAT));
2206 size += sprintf(&buf[size], "\n");
2207
2208 size += sprintf(&buf[size], "L/ Commands in Q : [ 0x");
2209
2210 for (n = dd->slot_groups-1; n >= 0; n--) {
2211 if (sizeof(long) > sizeof(u32))
2212 group_allocated =
2213 dd->port->cmds_to_issue[n/2] >> (32*(n&1));
2214 else
2215 group_allocated = dd->port->cmds_to_issue[n];
2216 size += sprintf(&buf[size], "%08X ", group_allocated);
2217 }
2218 size += sprintf(&buf[size], "]\n");
2219
2220 *offset = size <= len ? size : len;
2221 size = copy_to_user(ubuf, buf, *offset);
2222 if (size)
2223 rv = -EFAULT;
2224
2225 kfree(buf);
2226 return rv ? rv : *offset;
2227 }
2228
mtip_hw_read_flags(struct file * f,char __user * ubuf,size_t len,loff_t * offset)2229 static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf,
2230 size_t len, loff_t *offset)
2231 {
2232 struct driver_data *dd = (struct driver_data *)f->private_data;
2233 char *buf;
2234 int size = *offset;
2235 int rv = 0;
2236
2237 if (!len || size)
2238 return 0;
2239
2240 buf = kzalloc(MTIP_DFS_MAX_BUF_SIZE, GFP_KERNEL);
2241 if (!buf)
2242 return -ENOMEM;
2243
2244 size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n",
2245 dd->port->flags);
2246 size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n",
2247 dd->dd_flag);
2248
2249 *offset = size <= len ? size : len;
2250 size = copy_to_user(ubuf, buf, *offset);
2251 if (size)
2252 rv = -EFAULT;
2253
2254 kfree(buf);
2255 return rv ? rv : *offset;
2256 }
2257
2258 static const struct file_operations mtip_regs_fops = {
2259 .owner = THIS_MODULE,
2260 .open = simple_open,
2261 .read = mtip_hw_read_registers,
2262 };
2263
2264 static const struct file_operations mtip_flags_fops = {
2265 .owner = THIS_MODULE,
2266 .open = simple_open,
2267 .read = mtip_hw_read_flags,
2268 };
2269
mtip_hw_debugfs_init(struct driver_data * dd)2270 static void mtip_hw_debugfs_init(struct driver_data *dd)
2271 {
2272 dd->dfs_node = debugfs_create_dir(dd->disk->disk_name, dfs_parent);
2273 debugfs_create_file("flags", 0444, dd->dfs_node, dd, &mtip_flags_fops);
2274 debugfs_create_file("registers", 0444, dd->dfs_node, dd,
2275 &mtip_regs_fops);
2276 }
2277
mtip_hw_debugfs_exit(struct driver_data * dd)2278 static void mtip_hw_debugfs_exit(struct driver_data *dd)
2279 {
2280 debugfs_remove_recursive(dd->dfs_node);
2281 }
2282
2283 /*
2284 * Perform any init/resume time hardware setup
2285 *
2286 * @dd Pointer to the driver data structure.
2287 *
2288 * return value
2289 * None
2290 */
hba_setup(struct driver_data * dd)2291 static inline void hba_setup(struct driver_data *dd)
2292 {
2293 u32 hwdata;
2294 hwdata = readl(dd->mmio + HOST_HSORG);
2295
2296 /* interrupt bug workaround: use only 1 IS bit.*/
2297 writel(hwdata |
2298 HSORG_DISABLE_SLOTGRP_INTR |
2299 HSORG_DISABLE_SLOTGRP_PXIS,
2300 dd->mmio + HOST_HSORG);
2301 }
2302
mtip_device_unaligned_constrained(struct driver_data * dd)2303 static int mtip_device_unaligned_constrained(struct driver_data *dd)
2304 {
2305 return (dd->pdev->device == P420M_DEVICE_ID ? 1 : 0);
2306 }
2307
2308 /*
2309 * Detect the details of the product, and store anything needed
2310 * into the driver data structure. This includes product type and
2311 * version and number of slot groups.
2312 *
2313 * @dd Pointer to the driver data structure.
2314 *
2315 * return value
2316 * None
2317 */
mtip_detect_product(struct driver_data * dd)2318 static void mtip_detect_product(struct driver_data *dd)
2319 {
2320 u32 hwdata;
2321 unsigned int rev, slotgroups;
2322
2323 /*
2324 * HBA base + 0xFC [15:0] - vendor-specific hardware interface
2325 * info register:
2326 * [15:8] hardware/software interface rev#
2327 * [ 3] asic-style interface
2328 * [ 2:0] number of slot groups, minus 1 (only valid for asic-style).
2329 */
2330 hwdata = readl(dd->mmio + HOST_HSORG);
2331
2332 dd->product_type = MTIP_PRODUCT_UNKNOWN;
2333 dd->slot_groups = 1;
2334
2335 if (hwdata & 0x8) {
2336 dd->product_type = MTIP_PRODUCT_ASICFPGA;
2337 rev = (hwdata & HSORG_HWREV) >> 8;
2338 slotgroups = (hwdata & HSORG_SLOTGROUPS) + 1;
2339 dev_info(&dd->pdev->dev,
2340 "ASIC-FPGA design, HS rev 0x%x, "
2341 "%i slot groups [%i slots]\n",
2342 rev,
2343 slotgroups,
2344 slotgroups * 32);
2345
2346 if (slotgroups > MTIP_MAX_SLOT_GROUPS) {
2347 dev_warn(&dd->pdev->dev,
2348 "Warning: driver only supports "
2349 "%i slot groups.\n", MTIP_MAX_SLOT_GROUPS);
2350 slotgroups = MTIP_MAX_SLOT_GROUPS;
2351 }
2352 dd->slot_groups = slotgroups;
2353 return;
2354 }
2355
2356 dev_warn(&dd->pdev->dev, "Unrecognized product id\n");
2357 }
2358
2359 /*
2360 * Blocking wait for FTL rebuild to complete
2361 *
2362 * @dd Pointer to the DRIVER_DATA structure.
2363 *
2364 * return value
2365 * 0 FTL rebuild completed successfully
2366 * -EFAULT FTL rebuild error/timeout/interruption
2367 */
mtip_ftl_rebuild_poll(struct driver_data * dd)2368 static int mtip_ftl_rebuild_poll(struct driver_data *dd)
2369 {
2370 unsigned long timeout, cnt = 0, start;
2371
2372 dev_warn(&dd->pdev->dev,
2373 "FTL rebuild in progress. Polling for completion.\n");
2374
2375 start = jiffies;
2376 timeout = jiffies + msecs_to_jiffies(MTIP_FTL_REBUILD_TIMEOUT_MS);
2377
2378 do {
2379 if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
2380 &dd->dd_flag)))
2381 return -EFAULT;
2382 if (mtip_check_surprise_removal(dd))
2383 return -EFAULT;
2384
2385 if (mtip_get_identify(dd->port, NULL) < 0)
2386 return -EFAULT;
2387
2388 if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) ==
2389 MTIP_FTL_REBUILD_MAGIC) {
2390 ssleep(1);
2391 /* Print message every 3 minutes */
2392 if (cnt++ >= 180) {
2393 dev_warn(&dd->pdev->dev,
2394 "FTL rebuild in progress (%d secs).\n",
2395 jiffies_to_msecs(jiffies - start) / 1000);
2396 cnt = 0;
2397 }
2398 } else {
2399 dev_warn(&dd->pdev->dev,
2400 "FTL rebuild complete (%d secs).\n",
2401 jiffies_to_msecs(jiffies - start) / 1000);
2402 mtip_block_initialize(dd);
2403 return 0;
2404 }
2405 } while (time_before(jiffies, timeout));
2406
2407 /* Check for timeout */
2408 dev_err(&dd->pdev->dev,
2409 "Timed out waiting for FTL rebuild to complete (%d secs).\n",
2410 jiffies_to_msecs(jiffies - start) / 1000);
2411 return -EFAULT;
2412 }
2413
mtip_softirq_done_fn(struct request * rq)2414 static void mtip_softirq_done_fn(struct request *rq)
2415 {
2416 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
2417 struct driver_data *dd = rq->q->queuedata;
2418
2419 /* Unmap the DMA scatter list entries */
2420 dma_unmap_sg(&dd->pdev->dev, cmd->sg, cmd->scatter_ents,
2421 cmd->direction);
2422
2423 if (unlikely(cmd->unaligned))
2424 atomic_inc(&dd->port->cmd_slot_unal);
2425
2426 blk_mq_end_request(rq, cmd->status);
2427 }
2428
mtip_abort_cmd(struct request * req,void * data)2429 static bool mtip_abort_cmd(struct request *req, void *data)
2430 {
2431 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req);
2432 struct driver_data *dd = data;
2433
2434 dbg_printk(MTIP_DRV_NAME " Aborting request, tag = %d\n", req->tag);
2435
2436 clear_bit(req->tag, dd->port->cmds_to_issue);
2437 cmd->status = BLK_STS_IOERR;
2438 mtip_softirq_done_fn(req);
2439 return true;
2440 }
2441
mtip_queue_cmd(struct request * req,void * data)2442 static bool mtip_queue_cmd(struct request *req, void *data)
2443 {
2444 struct driver_data *dd = data;
2445
2446 set_bit(req->tag, dd->port->cmds_to_issue);
2447 blk_abort_request(req);
2448 return true;
2449 }
2450
2451 /*
2452 * service thread to issue queued commands
2453 *
2454 * @data Pointer to the driver data structure.
2455 *
2456 * return value
2457 * 0
2458 */
2459
mtip_service_thread(void * data)2460 static int mtip_service_thread(void *data)
2461 {
2462 struct driver_data *dd = (struct driver_data *)data;
2463 unsigned long slot, slot_start, slot_wrap, to;
2464 unsigned int num_cmd_slots = dd->slot_groups * 32;
2465 struct mtip_port *port = dd->port;
2466
2467 while (1) {
2468 if (kthread_should_stop() ||
2469 test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags))
2470 goto st_out;
2471 clear_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags);
2472
2473 /*
2474 * the condition is to check neither an internal command is
2475 * is in progress nor error handling is active
2476 */
2477 wait_event_interruptible(port->svc_wait, (port->flags) &&
2478 (port->flags & MTIP_PF_SVC_THD_WORK));
2479
2480 if (kthread_should_stop() ||
2481 test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags))
2482 goto st_out;
2483
2484 if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
2485 &dd->dd_flag)))
2486 goto st_out;
2487
2488 set_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags);
2489
2490 restart_eh:
2491 /* Demux bits: start with error handling */
2492 if (test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags)) {
2493 mtip_handle_tfe(dd);
2494 clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
2495 }
2496
2497 if (test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags))
2498 goto restart_eh;
2499
2500 if (test_bit(MTIP_PF_TO_ACTIVE_BIT, &port->flags)) {
2501 to = jiffies + msecs_to_jiffies(5000);
2502
2503 do {
2504 mdelay(100);
2505 } while (atomic_read(&dd->irq_workers_active) != 0 &&
2506 time_before(jiffies, to));
2507
2508 if (atomic_read(&dd->irq_workers_active) != 0)
2509 dev_warn(&dd->pdev->dev,
2510 "Completion workers still active!");
2511
2512 blk_mq_quiesce_queue(dd->queue);
2513
2514 blk_mq_tagset_busy_iter(&dd->tags, mtip_queue_cmd, dd);
2515
2516 set_bit(MTIP_PF_ISSUE_CMDS_BIT, &dd->port->flags);
2517
2518 if (mtip_device_reset(dd))
2519 blk_mq_tagset_busy_iter(&dd->tags,
2520 mtip_abort_cmd, dd);
2521
2522 clear_bit(MTIP_PF_TO_ACTIVE_BIT, &dd->port->flags);
2523
2524 blk_mq_unquiesce_queue(dd->queue);
2525 }
2526
2527 if (test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) {
2528 slot = 1;
2529 /* used to restrict the loop to one iteration */
2530 slot_start = num_cmd_slots;
2531 slot_wrap = 0;
2532 while (1) {
2533 slot = find_next_bit(port->cmds_to_issue,
2534 num_cmd_slots, slot);
2535 if (slot_wrap == 1) {
2536 if ((slot_start >= slot) ||
2537 (slot >= num_cmd_slots))
2538 break;
2539 }
2540 if (unlikely(slot_start == num_cmd_slots))
2541 slot_start = slot;
2542
2543 if (unlikely(slot == num_cmd_slots)) {
2544 slot = 1;
2545 slot_wrap = 1;
2546 continue;
2547 }
2548
2549 /* Issue the command to the hardware */
2550 mtip_issue_ncq_command(port, slot);
2551
2552 clear_bit(slot, port->cmds_to_issue);
2553 }
2554
2555 clear_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags);
2556 }
2557
2558 if (test_bit(MTIP_PF_REBUILD_BIT, &port->flags)) {
2559 if (mtip_ftl_rebuild_poll(dd) == 0)
2560 clear_bit(MTIP_PF_REBUILD_BIT, &port->flags);
2561 }
2562 }
2563
2564 st_out:
2565 return 0;
2566 }
2567
2568 /*
2569 * DMA region teardown
2570 *
2571 * @dd Pointer to driver_data structure
2572 *
2573 * return value
2574 * None
2575 */
mtip_dma_free(struct driver_data * dd)2576 static void mtip_dma_free(struct driver_data *dd)
2577 {
2578 struct mtip_port *port = dd->port;
2579
2580 if (port->block1)
2581 dma_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ,
2582 port->block1, port->block1_dma);
2583
2584 if (port->command_list) {
2585 dma_free_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ,
2586 port->command_list, port->command_list_dma);
2587 }
2588 }
2589
2590 /*
2591 * DMA region setup
2592 *
2593 * @dd Pointer to driver_data structure
2594 *
2595 * return value
2596 * -ENOMEM Not enough free DMA region space to initialize driver
2597 */
mtip_dma_alloc(struct driver_data * dd)2598 static int mtip_dma_alloc(struct driver_data *dd)
2599 {
2600 struct mtip_port *port = dd->port;
2601
2602 /* Allocate dma memory for RX Fis, Identify, and Sector Buffer */
2603 port->block1 =
2604 dma_alloc_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ,
2605 &port->block1_dma, GFP_KERNEL);
2606 if (!port->block1)
2607 return -ENOMEM;
2608
2609 /* Allocate dma memory for command list */
2610 port->command_list =
2611 dma_alloc_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ,
2612 &port->command_list_dma, GFP_KERNEL);
2613 if (!port->command_list) {
2614 dma_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ,
2615 port->block1, port->block1_dma);
2616 port->block1 = NULL;
2617 port->block1_dma = 0;
2618 return -ENOMEM;
2619 }
2620
2621 /* Setup all pointers into first DMA region */
2622 port->rxfis = port->block1 + AHCI_RX_FIS_OFFSET;
2623 port->rxfis_dma = port->block1_dma + AHCI_RX_FIS_OFFSET;
2624 port->identify = port->block1 + AHCI_IDFY_OFFSET;
2625 port->identify_dma = port->block1_dma + AHCI_IDFY_OFFSET;
2626 port->log_buf = port->block1 + AHCI_SECTBUF_OFFSET;
2627 port->log_buf_dma = port->block1_dma + AHCI_SECTBUF_OFFSET;
2628 port->smart_buf = port->block1 + AHCI_SMARTBUF_OFFSET;
2629 port->smart_buf_dma = port->block1_dma + AHCI_SMARTBUF_OFFSET;
2630
2631 return 0;
2632 }
2633
mtip_hw_get_identify(struct driver_data * dd)2634 static int mtip_hw_get_identify(struct driver_data *dd)
2635 {
2636 struct smart_attr attr242;
2637 unsigned char *buf;
2638 int rv;
2639
2640 if (mtip_get_identify(dd->port, NULL) < 0)
2641 return -EFAULT;
2642
2643 if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) ==
2644 MTIP_FTL_REBUILD_MAGIC) {
2645 set_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags);
2646 return MTIP_FTL_REBUILD_MAGIC;
2647 }
2648 mtip_dump_identify(dd->port);
2649
2650 /* check write protect, over temp and rebuild statuses */
2651 rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ,
2652 dd->port->log_buf,
2653 dd->port->log_buf_dma, 1);
2654 if (rv) {
2655 dev_warn(&dd->pdev->dev,
2656 "Error in READ LOG EXT (10h) command\n");
2657 /* non-critical error, don't fail the load */
2658 } else {
2659 buf = (unsigned char *)dd->port->log_buf;
2660 if (buf[259] & 0x1) {
2661 dev_info(&dd->pdev->dev,
2662 "Write protect bit is set.\n");
2663 set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag);
2664 }
2665 if (buf[288] == 0xF7) {
2666 dev_info(&dd->pdev->dev,
2667 "Exceeded Tmax, drive in thermal shutdown.\n");
2668 set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag);
2669 }
2670 if (buf[288] == 0xBF) {
2671 dev_info(&dd->pdev->dev,
2672 "Drive indicates rebuild has failed.\n");
2673 set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag);
2674 }
2675 }
2676
2677 /* get write protect progess */
2678 memset(&attr242, 0, sizeof(struct smart_attr));
2679 if (mtip_get_smart_attr(dd->port, 242, &attr242))
2680 dev_warn(&dd->pdev->dev,
2681 "Unable to check write protect progress\n");
2682 else
2683 dev_info(&dd->pdev->dev,
2684 "Write protect progress: %u%% (%u blocks)\n",
2685 attr242.cur, le32_to_cpu(attr242.data));
2686
2687 return rv;
2688 }
2689
2690 /*
2691 * Called once for each card.
2692 *
2693 * @dd Pointer to the driver data structure.
2694 *
2695 * return value
2696 * 0 on success, else an error code.
2697 */
mtip_hw_init(struct driver_data * dd)2698 static int mtip_hw_init(struct driver_data *dd)
2699 {
2700 int i;
2701 int rv;
2702 unsigned long timeout, timetaken;
2703
2704 dd->mmio = pcim_iomap_region(dd->pdev, MTIP_ABAR, MTIP_DRV_NAME);
2705 if (IS_ERR(dd->mmio)) {
2706 dev_err(&dd->pdev->dev, "Unable to request / ioremap PCI region\n");
2707 return PTR_ERR(dd->mmio);
2708 }
2709
2710
2711 mtip_detect_product(dd);
2712 if (dd->product_type == MTIP_PRODUCT_UNKNOWN) {
2713 rv = -EIO;
2714 goto out1;
2715 }
2716
2717 hba_setup(dd);
2718
2719 dd->port = kzalloc_node(sizeof(struct mtip_port), GFP_KERNEL,
2720 dd->numa_node);
2721 if (!dd->port)
2722 return -ENOMEM;
2723
2724 /* Continue workqueue setup */
2725 for (i = 0; i < MTIP_MAX_SLOT_GROUPS; i++)
2726 dd->work[i].port = dd->port;
2727
2728 /* Enable unaligned IO constraints for some devices */
2729 if (mtip_device_unaligned_constrained(dd))
2730 dd->unal_qdepth = MTIP_MAX_UNALIGNED_SLOTS;
2731 else
2732 dd->unal_qdepth = 0;
2733
2734 atomic_set(&dd->port->cmd_slot_unal, dd->unal_qdepth);
2735
2736 /* Spinlock to prevent concurrent issue */
2737 for (i = 0; i < MTIP_MAX_SLOT_GROUPS; i++)
2738 spin_lock_init(&dd->port->cmd_issue_lock[i]);
2739
2740 /* Set the port mmio base address. */
2741 dd->port->mmio = dd->mmio + PORT_OFFSET;
2742 dd->port->dd = dd;
2743
2744 /* DMA allocations */
2745 rv = mtip_dma_alloc(dd);
2746 if (rv < 0)
2747 goto out1;
2748
2749 /* Setup the pointers to the extended s_active and CI registers. */
2750 for (i = 0; i < dd->slot_groups; i++) {
2751 dd->port->s_active[i] =
2752 dd->port->mmio + i*0x80 + PORT_SCR_ACT;
2753 dd->port->cmd_issue[i] =
2754 dd->port->mmio + i*0x80 + PORT_COMMAND_ISSUE;
2755 dd->port->completed[i] =
2756 dd->port->mmio + i*0x80 + PORT_SDBV;
2757 }
2758
2759 timetaken = jiffies;
2760 timeout = jiffies + msecs_to_jiffies(30000);
2761 while (((readl(dd->port->mmio + PORT_SCR_STAT) & 0x0F) != 0x03) &&
2762 time_before(jiffies, timeout)) {
2763 mdelay(100);
2764 }
2765 if (unlikely(mtip_check_surprise_removal(dd))) {
2766 timetaken = jiffies - timetaken;
2767 dev_warn(&dd->pdev->dev,
2768 "Surprise removal detected at %u ms\n",
2769 jiffies_to_msecs(timetaken));
2770 rv = -ENODEV;
2771 goto out2 ;
2772 }
2773 if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) {
2774 timetaken = jiffies - timetaken;
2775 dev_warn(&dd->pdev->dev,
2776 "Removal detected at %u ms\n",
2777 jiffies_to_msecs(timetaken));
2778 rv = -EFAULT;
2779 goto out2;
2780 }
2781
2782 /* Conditionally reset the HBA. */
2783 if (!(readl(dd->mmio + HOST_CAP) & HOST_CAP_NZDMA)) {
2784 if (mtip_hba_reset(dd) < 0) {
2785 dev_err(&dd->pdev->dev,
2786 "Card did not reset within timeout\n");
2787 rv = -EIO;
2788 goto out2;
2789 }
2790 } else {
2791 /* Clear any pending interrupts on the HBA */
2792 writel(readl(dd->mmio + HOST_IRQ_STAT),
2793 dd->mmio + HOST_IRQ_STAT);
2794 }
2795
2796 mtip_init_port(dd->port);
2797 mtip_start_port(dd->port);
2798
2799 /* Setup the ISR and enable interrupts. */
2800 rv = request_irq(dd->pdev->irq, mtip_irq_handler, IRQF_SHARED,
2801 dev_driver_string(&dd->pdev->dev), dd);
2802 if (rv) {
2803 dev_err(&dd->pdev->dev,
2804 "Unable to allocate IRQ %d\n", dd->pdev->irq);
2805 goto out2;
2806 }
2807 irq_set_affinity_hint(dd->pdev->irq, get_cpu_mask(dd->isr_binding));
2808
2809 /* Enable interrupts on the HBA. */
2810 writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN,
2811 dd->mmio + HOST_CTL);
2812
2813 init_waitqueue_head(&dd->port->svc_wait);
2814
2815 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) {
2816 rv = -EFAULT;
2817 goto out3;
2818 }
2819
2820 return rv;
2821
2822 out3:
2823 /* Disable interrupts on the HBA. */
2824 writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN,
2825 dd->mmio + HOST_CTL);
2826
2827 /* Release the IRQ. */
2828 irq_set_affinity_hint(dd->pdev->irq, NULL);
2829 free_irq(dd->pdev->irq, dd);
2830
2831 out2:
2832 mtip_deinit_port(dd->port);
2833 mtip_dma_free(dd);
2834
2835 out1:
2836 /* Free the memory allocated for the for structure. */
2837 kfree(dd->port);
2838
2839 return rv;
2840 }
2841
mtip_standby_drive(struct driver_data * dd)2842 static int mtip_standby_drive(struct driver_data *dd)
2843 {
2844 int rv = 0;
2845
2846 if (dd->sr || !dd->port)
2847 return -ENODEV;
2848 /*
2849 * Send standby immediate (E0h) to the drive so that it
2850 * saves its state.
2851 */
2852 if (!test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags) &&
2853 !test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag) &&
2854 !test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag)) {
2855 rv = mtip_standby_immediate(dd->port);
2856 if (rv)
2857 dev_warn(&dd->pdev->dev,
2858 "STANDBY IMMEDIATE failed\n");
2859 }
2860 return rv;
2861 }
2862
2863 /*
2864 * Called to deinitialize an interface.
2865 *
2866 * @dd Pointer to the driver data structure.
2867 *
2868 * return value
2869 * 0
2870 */
mtip_hw_exit(struct driver_data * dd)2871 static int mtip_hw_exit(struct driver_data *dd)
2872 {
2873 if (!dd->sr) {
2874 /* de-initialize the port. */
2875 mtip_deinit_port(dd->port);
2876
2877 /* Disable interrupts on the HBA. */
2878 writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN,
2879 dd->mmio + HOST_CTL);
2880 }
2881
2882 /* Release the IRQ. */
2883 irq_set_affinity_hint(dd->pdev->irq, NULL);
2884 free_irq(dd->pdev->irq, dd);
2885 msleep(1000);
2886
2887 /* Free dma regions */
2888 mtip_dma_free(dd);
2889
2890 /* Free the memory allocated for the for structure. */
2891 kfree(dd->port);
2892 dd->port = NULL;
2893
2894 return 0;
2895 }
2896
2897 /*
2898 * Issue a Standby Immediate command to the device.
2899 *
2900 * This function is called by the Block Layer just before the
2901 * system powers off during a shutdown.
2902 *
2903 * @dd Pointer to the driver data structure.
2904 *
2905 * return value
2906 * 0
2907 */
mtip_hw_shutdown(struct driver_data * dd)2908 static int mtip_hw_shutdown(struct driver_data *dd)
2909 {
2910 /*
2911 * Send standby immediate (E0h) to the drive so that it
2912 * saves its state.
2913 */
2914 mtip_standby_drive(dd);
2915
2916 return 0;
2917 }
2918
2919 /*
2920 * Suspend function
2921 *
2922 * This function is called by the Block Layer just before the
2923 * system hibernates.
2924 *
2925 * @dd Pointer to the driver data structure.
2926 *
2927 * return value
2928 * 0 Suspend was successful
2929 * -EFAULT Suspend was not successful
2930 */
mtip_hw_suspend(struct driver_data * dd)2931 static int mtip_hw_suspend(struct driver_data *dd)
2932 {
2933 /*
2934 * Send standby immediate (E0h) to the drive
2935 * so that it saves its state.
2936 */
2937 if (mtip_standby_drive(dd) != 0) {
2938 dev_err(&dd->pdev->dev,
2939 "Failed standby-immediate command\n");
2940 return -EFAULT;
2941 }
2942
2943 /* Disable interrupts on the HBA.*/
2944 writel(readl(dd->mmio + HOST_CTL) & ~HOST_IRQ_EN,
2945 dd->mmio + HOST_CTL);
2946 mtip_deinit_port(dd->port);
2947
2948 return 0;
2949 }
2950
2951 /*
2952 * Resume function
2953 *
2954 * This function is called by the Block Layer as the
2955 * system resumes.
2956 *
2957 * @dd Pointer to the driver data structure.
2958 *
2959 * return value
2960 * 0 Resume was successful
2961 * -EFAULT Resume was not successful
2962 */
mtip_hw_resume(struct driver_data * dd)2963 static int mtip_hw_resume(struct driver_data *dd)
2964 {
2965 /* Perform any needed hardware setup steps */
2966 hba_setup(dd);
2967
2968 /* Reset the HBA */
2969 if (mtip_hba_reset(dd) != 0) {
2970 dev_err(&dd->pdev->dev,
2971 "Unable to reset the HBA\n");
2972 return -EFAULT;
2973 }
2974
2975 /*
2976 * Enable the port, DMA engine, and FIS reception specific
2977 * h/w in controller.
2978 */
2979 mtip_init_port(dd->port);
2980 mtip_start_port(dd->port);
2981
2982 /* Enable interrupts on the HBA.*/
2983 writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN,
2984 dd->mmio + HOST_CTL);
2985
2986 return 0;
2987 }
2988
2989 /*
2990 * Helper function for reusing disk name
2991 * upon hot insertion.
2992 */
rssd_disk_name_format(char * prefix,int index,char * buf,int buflen)2993 static int rssd_disk_name_format(char *prefix,
2994 int index,
2995 char *buf,
2996 int buflen)
2997 {
2998 const int base = 'z' - 'a' + 1;
2999 char *begin = buf + strlen(prefix);
3000 char *end = buf + buflen;
3001 char *p;
3002 int unit;
3003
3004 p = end - 1;
3005 *p = '\0';
3006 unit = base;
3007 do {
3008 if (p == begin)
3009 return -EINVAL;
3010 *--p = 'a' + (index % unit);
3011 index = (index / unit) - 1;
3012 } while (index >= 0);
3013
3014 memmove(begin, p, end - p);
3015 memcpy(buf, prefix, strlen(prefix));
3016
3017 return 0;
3018 }
3019
3020 /*
3021 * Block layer IOCTL handler.
3022 *
3023 * @dev Pointer to the block_device structure.
3024 * @mode ignored
3025 * @cmd IOCTL command passed from the user application.
3026 * @arg Argument passed from the user application.
3027 *
3028 * return value
3029 * 0 IOCTL completed successfully.
3030 * -ENOTTY IOCTL not supported or invalid driver data
3031 * structure pointer.
3032 */
mtip_block_ioctl(struct block_device * dev,blk_mode_t mode,unsigned cmd,unsigned long arg)3033 static int mtip_block_ioctl(struct block_device *dev,
3034 blk_mode_t mode,
3035 unsigned cmd,
3036 unsigned long arg)
3037 {
3038 struct driver_data *dd = dev->bd_disk->private_data;
3039
3040 if (!capable(CAP_SYS_ADMIN))
3041 return -EACCES;
3042
3043 if (!dd)
3044 return -ENOTTY;
3045
3046 if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)))
3047 return -ENOTTY;
3048
3049 switch (cmd) {
3050 case BLKFLSBUF:
3051 return -ENOTTY;
3052 default:
3053 return mtip_hw_ioctl(dd, cmd, arg);
3054 }
3055 }
3056
3057 #ifdef CONFIG_COMPAT
3058 /*
3059 * Block layer compat IOCTL handler.
3060 *
3061 * @dev Pointer to the block_device structure.
3062 * @mode ignored
3063 * @cmd IOCTL command passed from the user application.
3064 * @arg Argument passed from the user application.
3065 *
3066 * return value
3067 * 0 IOCTL completed successfully.
3068 * -ENOTTY IOCTL not supported or invalid driver data
3069 * structure pointer.
3070 */
mtip_block_compat_ioctl(struct block_device * dev,blk_mode_t mode,unsigned cmd,unsigned long arg)3071 static int mtip_block_compat_ioctl(struct block_device *dev,
3072 blk_mode_t mode,
3073 unsigned cmd,
3074 unsigned long arg)
3075 {
3076 struct driver_data *dd = dev->bd_disk->private_data;
3077
3078 if (!capable(CAP_SYS_ADMIN))
3079 return -EACCES;
3080
3081 if (!dd)
3082 return -ENOTTY;
3083
3084 if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)))
3085 return -ENOTTY;
3086
3087 switch (cmd) {
3088 case BLKFLSBUF:
3089 return -ENOTTY;
3090 case HDIO_DRIVE_TASKFILE: {
3091 struct mtip_compat_ide_task_request_s __user *compat_req_task;
3092 ide_task_request_t req_task;
3093 int compat_tasksize, outtotal, ret;
3094
3095 compat_tasksize =
3096 sizeof(struct mtip_compat_ide_task_request_s);
3097
3098 compat_req_task =
3099 (struct mtip_compat_ide_task_request_s __user *) arg;
3100
3101 if (copy_from_user(&req_task, (void __user *) arg,
3102 compat_tasksize - (2 * sizeof(compat_long_t))))
3103 return -EFAULT;
3104
3105 if (get_user(req_task.out_size, &compat_req_task->out_size))
3106 return -EFAULT;
3107
3108 if (get_user(req_task.in_size, &compat_req_task->in_size))
3109 return -EFAULT;
3110
3111 outtotal = sizeof(struct mtip_compat_ide_task_request_s);
3112
3113 ret = exec_drive_taskfile(dd, (void __user *) arg,
3114 &req_task, outtotal);
3115
3116 if (copy_to_user((void __user *) arg, &req_task,
3117 compat_tasksize -
3118 (2 * sizeof(compat_long_t))))
3119 return -EFAULT;
3120
3121 if (put_user(req_task.out_size, &compat_req_task->out_size))
3122 return -EFAULT;
3123
3124 if (put_user(req_task.in_size, &compat_req_task->in_size))
3125 return -EFAULT;
3126
3127 return ret;
3128 }
3129 default:
3130 return mtip_hw_ioctl(dd, cmd, arg);
3131 }
3132 }
3133 #endif
3134
3135 /*
3136 * Obtain the geometry of the device.
3137 *
3138 * You may think that this function is obsolete, but some applications,
3139 * fdisk for example still used CHS values. This function describes the
3140 * device as having 224 heads and 56 sectors per cylinder. These values are
3141 * chosen so that each cylinder is aligned on a 4KB boundary. Since a
3142 * partition is described in terms of a start and end cylinder this means
3143 * that each partition is also 4KB aligned. Non-aligned partitions adversely
3144 * affects performance.
3145 *
3146 * @dev Pointer to the block_device strucutre.
3147 * @geo Pointer to a hd_geometry structure.
3148 *
3149 * return value
3150 * 0 Operation completed successfully.
3151 * -ENOTTY An error occurred while reading the drive capacity.
3152 */
mtip_block_getgeo(struct block_device * dev,struct hd_geometry * geo)3153 static int mtip_block_getgeo(struct block_device *dev,
3154 struct hd_geometry *geo)
3155 {
3156 struct driver_data *dd = dev->bd_disk->private_data;
3157 sector_t capacity;
3158
3159 if (!dd)
3160 return -ENOTTY;
3161
3162 if (!(mtip_hw_get_capacity(dd, &capacity))) {
3163 dev_warn(&dd->pdev->dev,
3164 "Could not get drive capacity.\n");
3165 return -ENOTTY;
3166 }
3167
3168 geo->heads = 224;
3169 geo->sectors = 56;
3170 sector_div(capacity, (geo->heads * geo->sectors));
3171 geo->cylinders = capacity;
3172 return 0;
3173 }
3174
mtip_block_free_disk(struct gendisk * disk)3175 static void mtip_block_free_disk(struct gendisk *disk)
3176 {
3177 struct driver_data *dd = disk->private_data;
3178
3179 ida_free(&rssd_index_ida, dd->index);
3180 kfree(dd);
3181 }
3182
3183 /*
3184 * Block device operation function.
3185 *
3186 * This structure contains pointers to the functions required by the block
3187 * layer.
3188 */
3189 static const struct block_device_operations mtip_block_ops = {
3190 .ioctl = mtip_block_ioctl,
3191 #ifdef CONFIG_COMPAT
3192 .compat_ioctl = mtip_block_compat_ioctl,
3193 #endif
3194 .getgeo = mtip_block_getgeo,
3195 .free_disk = mtip_block_free_disk,
3196 .owner = THIS_MODULE
3197 };
3198
is_se_active(struct driver_data * dd)3199 static inline bool is_se_active(struct driver_data *dd)
3200 {
3201 if (unlikely(test_bit(MTIP_PF_SE_ACTIVE_BIT, &dd->port->flags))) {
3202 if (dd->port->ic_pause_timer) {
3203 unsigned long to = dd->port->ic_pause_timer +
3204 msecs_to_jiffies(1000);
3205 if (time_after(jiffies, to)) {
3206 clear_bit(MTIP_PF_SE_ACTIVE_BIT,
3207 &dd->port->flags);
3208 clear_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag);
3209 dd->port->ic_pause_timer = 0;
3210 wake_up_interruptible(&dd->port->svc_wait);
3211 return false;
3212 }
3213 }
3214 return true;
3215 }
3216 return false;
3217 }
3218
is_stopped(struct driver_data * dd,struct request * rq)3219 static inline bool is_stopped(struct driver_data *dd, struct request *rq)
3220 {
3221 if (likely(!(dd->dd_flag & MTIP_DDF_STOP_IO)))
3222 return false;
3223
3224 if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))
3225 return true;
3226 if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))
3227 return true;
3228 if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag) &&
3229 rq_data_dir(rq))
3230 return true;
3231 if (test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag))
3232 return true;
3233 if (test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag))
3234 return true;
3235
3236 return false;
3237 }
3238
mtip_check_unal_depth(struct blk_mq_hw_ctx * hctx,struct request * rq)3239 static bool mtip_check_unal_depth(struct blk_mq_hw_ctx *hctx,
3240 struct request *rq)
3241 {
3242 struct driver_data *dd = hctx->queue->queuedata;
3243 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
3244
3245 if (rq_data_dir(rq) == READ || !dd->unal_qdepth)
3246 return false;
3247
3248 /*
3249 * If unaligned depth must be limited on this controller, mark it
3250 * as unaligned if the IO isn't on a 4k boundary (start of length).
3251 */
3252 if (blk_rq_sectors(rq) <= 64) {
3253 if ((blk_rq_pos(rq) & 7) || (blk_rq_sectors(rq) & 7))
3254 cmd->unaligned = 1;
3255 }
3256
3257 if (cmd->unaligned && atomic_dec_if_positive(&dd->port->cmd_slot_unal) >= 0)
3258 return true;
3259
3260 return false;
3261 }
3262
mtip_issue_reserved_cmd(struct blk_mq_hw_ctx * hctx,struct request * rq)3263 static blk_status_t mtip_issue_reserved_cmd(struct blk_mq_hw_ctx *hctx,
3264 struct request *rq)
3265 {
3266 struct driver_data *dd = hctx->queue->queuedata;
3267 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
3268 struct mtip_int_cmd *icmd = cmd->icmd;
3269 struct mtip_cmd_hdr *hdr =
3270 dd->port->command_list + sizeof(struct mtip_cmd_hdr) * rq->tag;
3271 struct mtip_cmd_sg *command_sg;
3272
3273 if (mtip_commands_active(dd->port))
3274 return BLK_STS_DEV_RESOURCE;
3275
3276 hdr->ctba = cpu_to_le32(cmd->command_dma & 0xFFFFFFFF);
3277 if (test_bit(MTIP_PF_HOST_CAP_64, &dd->port->flags))
3278 hdr->ctbau = cpu_to_le32((cmd->command_dma >> 16) >> 16);
3279 /* Populate the SG list */
3280 hdr->opts = cpu_to_le32(icmd->opts | icmd->fis_len);
3281 if (icmd->buf_len) {
3282 command_sg = cmd->command + AHCI_CMD_TBL_HDR_SZ;
3283
3284 command_sg->info = cpu_to_le32((icmd->buf_len-1) & 0x3FFFFF);
3285 command_sg->dba = cpu_to_le32(icmd->buffer & 0xFFFFFFFF);
3286 command_sg->dba_upper =
3287 cpu_to_le32((icmd->buffer >> 16) >> 16);
3288
3289 hdr->opts |= cpu_to_le32((1 << 16));
3290 }
3291
3292 /* Populate the command header */
3293 hdr->byte_count = 0;
3294
3295 blk_mq_start_request(rq);
3296 mtip_issue_non_ncq_command(dd->port, rq->tag);
3297 return 0;
3298 }
3299
mtip_queue_rq(struct blk_mq_hw_ctx * hctx,const struct blk_mq_queue_data * bd)3300 static blk_status_t mtip_queue_rq(struct blk_mq_hw_ctx *hctx,
3301 const struct blk_mq_queue_data *bd)
3302 {
3303 struct driver_data *dd = hctx->queue->queuedata;
3304 struct request *rq = bd->rq;
3305 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
3306
3307 if (blk_rq_is_passthrough(rq))
3308 return mtip_issue_reserved_cmd(hctx, rq);
3309
3310 if (unlikely(mtip_check_unal_depth(hctx, rq)))
3311 return BLK_STS_DEV_RESOURCE;
3312
3313 if (is_se_active(dd) || is_stopped(dd, rq))
3314 return BLK_STS_IOERR;
3315
3316 blk_mq_start_request(rq);
3317
3318 mtip_hw_submit_io(dd, rq, cmd, hctx);
3319 return BLK_STS_OK;
3320 }
3321
mtip_free_cmd(struct blk_mq_tag_set * set,struct request * rq,unsigned int hctx_idx)3322 static void mtip_free_cmd(struct blk_mq_tag_set *set, struct request *rq,
3323 unsigned int hctx_idx)
3324 {
3325 struct driver_data *dd = set->driver_data;
3326 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
3327
3328 if (!cmd->command)
3329 return;
3330
3331 dma_free_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ, cmd->command,
3332 cmd->command_dma);
3333 }
3334
mtip_init_cmd(struct blk_mq_tag_set * set,struct request * rq,unsigned int hctx_idx,unsigned int numa_node)3335 static int mtip_init_cmd(struct blk_mq_tag_set *set, struct request *rq,
3336 unsigned int hctx_idx, unsigned int numa_node)
3337 {
3338 struct driver_data *dd = set->driver_data;
3339 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
3340
3341 cmd->command = dma_alloc_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ,
3342 &cmd->command_dma, GFP_KERNEL);
3343 if (!cmd->command)
3344 return -ENOMEM;
3345
3346 sg_init_table(cmd->sg, MTIP_MAX_SG);
3347 return 0;
3348 }
3349
mtip_cmd_timeout(struct request * req)3350 static enum blk_eh_timer_return mtip_cmd_timeout(struct request *req)
3351 {
3352 struct driver_data *dd = req->q->queuedata;
3353
3354 if (blk_mq_is_reserved_rq(req)) {
3355 struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req);
3356
3357 cmd->status = BLK_STS_TIMEOUT;
3358 blk_mq_complete_request(req);
3359 return BLK_EH_DONE;
3360 }
3361
3362 if (test_bit(req->tag, dd->port->cmds_to_issue))
3363 goto exit_handler;
3364
3365 if (test_and_set_bit(MTIP_PF_TO_ACTIVE_BIT, &dd->port->flags))
3366 goto exit_handler;
3367
3368 wake_up_interruptible(&dd->port->svc_wait);
3369 exit_handler:
3370 return BLK_EH_RESET_TIMER;
3371 }
3372
3373 static const struct blk_mq_ops mtip_mq_ops = {
3374 .queue_rq = mtip_queue_rq,
3375 .init_request = mtip_init_cmd,
3376 .exit_request = mtip_free_cmd,
3377 .complete = mtip_softirq_done_fn,
3378 .timeout = mtip_cmd_timeout,
3379 };
3380
3381 /*
3382 * Block layer initialization function.
3383 *
3384 * This function is called once by the PCI layer for each P320
3385 * device that is connected to the system.
3386 *
3387 * @dd Pointer to the driver data structure.
3388 *
3389 * return value
3390 * 0 on success else an error code.
3391 */
mtip_block_initialize(struct driver_data * dd)3392 static int mtip_block_initialize(struct driver_data *dd)
3393 {
3394 struct queue_limits lim = {
3395 .physical_block_size = 4096,
3396 .max_hw_sectors = 0xffff,
3397 .max_segments = MTIP_MAX_SG,
3398 .max_segment_size = 0x400000,
3399 };
3400 int rv = 0, wait_for_rebuild = 0;
3401 sector_t capacity;
3402 unsigned int index = 0;
3403
3404 if (dd->disk)
3405 goto skip_create_disk; /* hw init done, before rebuild */
3406
3407 if (mtip_hw_init(dd)) {
3408 rv = -EINVAL;
3409 goto protocol_init_error;
3410 }
3411
3412 memset(&dd->tags, 0, sizeof(dd->tags));
3413 dd->tags.ops = &mtip_mq_ops;
3414 dd->tags.nr_hw_queues = 1;
3415 dd->tags.queue_depth = MTIP_MAX_COMMAND_SLOTS;
3416 dd->tags.reserved_tags = 1;
3417 dd->tags.cmd_size = sizeof(struct mtip_cmd);
3418 dd->tags.numa_node = dd->numa_node;
3419 dd->tags.flags = BLK_MQ_F_SHOULD_MERGE;
3420 dd->tags.driver_data = dd;
3421 dd->tags.timeout = MTIP_NCQ_CMD_TIMEOUT_MS;
3422
3423 rv = blk_mq_alloc_tag_set(&dd->tags);
3424 if (rv) {
3425 dev_err(&dd->pdev->dev,
3426 "Unable to allocate request queue\n");
3427 goto block_queue_alloc_tag_error;
3428 }
3429
3430 dd->disk = blk_mq_alloc_disk(&dd->tags, &lim, dd);
3431 if (IS_ERR(dd->disk)) {
3432 dev_err(&dd->pdev->dev,
3433 "Unable to allocate request queue\n");
3434 rv = -ENOMEM;
3435 goto block_queue_alloc_init_error;
3436 }
3437 dd->queue = dd->disk->queue;
3438
3439 rv = ida_alloc(&rssd_index_ida, GFP_KERNEL);
3440 if (rv < 0)
3441 goto ida_get_error;
3442 index = rv;
3443
3444 rv = rssd_disk_name_format("rssd",
3445 index,
3446 dd->disk->disk_name,
3447 DISK_NAME_LEN);
3448 if (rv)
3449 goto disk_index_error;
3450
3451 dd->disk->major = dd->major;
3452 dd->disk->first_minor = index * MTIP_MAX_MINORS;
3453 dd->disk->minors = MTIP_MAX_MINORS;
3454 dd->disk->fops = &mtip_block_ops;
3455 dd->disk->private_data = dd;
3456 dd->index = index;
3457
3458 mtip_hw_debugfs_init(dd);
3459
3460 skip_create_disk:
3461 /* Initialize the protocol layer. */
3462 wait_for_rebuild = mtip_hw_get_identify(dd);
3463 if (wait_for_rebuild < 0) {
3464 dev_err(&dd->pdev->dev,
3465 "Protocol layer initialization failed\n");
3466 rv = -EINVAL;
3467 goto init_hw_cmds_error;
3468 }
3469
3470 /*
3471 * if rebuild pending, start the service thread, and delay the block
3472 * queue creation and device_add_disk()
3473 */
3474 if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC)
3475 goto start_service_thread;
3476
3477 /* Set device limits. */
3478 dma_set_max_seg_size(&dd->pdev->dev, 0x400000);
3479
3480 /* Set the capacity of the device in 512 byte sectors. */
3481 if (!(mtip_hw_get_capacity(dd, &capacity))) {
3482 dev_warn(&dd->pdev->dev,
3483 "Could not read drive capacity\n");
3484 rv = -EIO;
3485 goto read_capacity_error;
3486 }
3487 set_capacity(dd->disk, capacity);
3488
3489 /* Enable the block device and add it to /dev */
3490 rv = device_add_disk(&dd->pdev->dev, dd->disk, mtip_disk_attr_groups);
3491 if (rv)
3492 goto read_capacity_error;
3493
3494 if (dd->mtip_svc_handler) {
3495 set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
3496 return rv; /* service thread created for handling rebuild */
3497 }
3498
3499 start_service_thread:
3500 dd->mtip_svc_handler = kthread_create_on_node(mtip_service_thread,
3501 dd, dd->numa_node,
3502 "mtip_svc_thd_%02d", index);
3503
3504 if (IS_ERR(dd->mtip_svc_handler)) {
3505 dev_err(&dd->pdev->dev, "service thread failed to start\n");
3506 dd->mtip_svc_handler = NULL;
3507 rv = -EFAULT;
3508 goto kthread_run_error;
3509 }
3510 wake_up_process(dd->mtip_svc_handler);
3511 if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC)
3512 rv = wait_for_rebuild;
3513
3514 return rv;
3515
3516 kthread_run_error:
3517 /* Delete our gendisk. This also removes the device from /dev */
3518 del_gendisk(dd->disk);
3519 read_capacity_error:
3520 init_hw_cmds_error:
3521 mtip_hw_debugfs_exit(dd);
3522 disk_index_error:
3523 ida_free(&rssd_index_ida, index);
3524 ida_get_error:
3525 put_disk(dd->disk);
3526 block_queue_alloc_init_error:
3527 blk_mq_free_tag_set(&dd->tags);
3528 block_queue_alloc_tag_error:
3529 mtip_hw_exit(dd); /* De-initialize the protocol layer. */
3530 protocol_init_error:
3531 return rv;
3532 }
3533
3534 /*
3535 * Function called by the PCI layer when just before the
3536 * machine shuts down.
3537 *
3538 * If a protocol layer shutdown function is present it will be called
3539 * by this function.
3540 *
3541 * @dd Pointer to the driver data structure.
3542 *
3543 * return value
3544 * 0
3545 */
mtip_block_shutdown(struct driver_data * dd)3546 static int mtip_block_shutdown(struct driver_data *dd)
3547 {
3548 mtip_hw_shutdown(dd);
3549
3550 dev_info(&dd->pdev->dev,
3551 "Shutting down %s ...\n", dd->disk->disk_name);
3552
3553 if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag))
3554 del_gendisk(dd->disk);
3555
3556 blk_mq_free_tag_set(&dd->tags);
3557 put_disk(dd->disk);
3558 return 0;
3559 }
3560
mtip_block_suspend(struct driver_data * dd)3561 static int mtip_block_suspend(struct driver_data *dd)
3562 {
3563 dev_info(&dd->pdev->dev,
3564 "Suspending %s ...\n", dd->disk->disk_name);
3565 mtip_hw_suspend(dd);
3566 return 0;
3567 }
3568
mtip_block_resume(struct driver_data * dd)3569 static int mtip_block_resume(struct driver_data *dd)
3570 {
3571 dev_info(&dd->pdev->dev, "Resuming %s ...\n",
3572 dd->disk->disk_name);
3573 mtip_hw_resume(dd);
3574 return 0;
3575 }
3576
drop_cpu(int cpu)3577 static void drop_cpu(int cpu)
3578 {
3579 cpu_use[cpu]--;
3580 }
3581
get_least_used_cpu_on_node(int node)3582 static int get_least_used_cpu_on_node(int node)
3583 {
3584 int cpu, least_used_cpu, least_cnt;
3585 const struct cpumask *node_mask;
3586
3587 node_mask = cpumask_of_node(node);
3588 least_used_cpu = cpumask_first(node_mask);
3589 least_cnt = cpu_use[least_used_cpu];
3590 cpu = least_used_cpu;
3591
3592 for_each_cpu(cpu, node_mask) {
3593 if (cpu_use[cpu] < least_cnt) {
3594 least_used_cpu = cpu;
3595 least_cnt = cpu_use[cpu];
3596 }
3597 }
3598 cpu_use[least_used_cpu]++;
3599 return least_used_cpu;
3600 }
3601
3602 /* Helper for selecting a node in round robin mode */
mtip_get_next_rr_node(void)3603 static inline int mtip_get_next_rr_node(void)
3604 {
3605 static int next_node = NUMA_NO_NODE;
3606
3607 if (next_node == NUMA_NO_NODE) {
3608 next_node = first_online_node;
3609 return next_node;
3610 }
3611
3612 next_node = next_online_node(next_node);
3613 if (next_node == MAX_NUMNODES)
3614 next_node = first_online_node;
3615 return next_node;
3616 }
3617
3618 static DEFINE_HANDLER(0);
3619 static DEFINE_HANDLER(1);
3620 static DEFINE_HANDLER(2);
3621 static DEFINE_HANDLER(3);
3622 static DEFINE_HANDLER(4);
3623 static DEFINE_HANDLER(5);
3624 static DEFINE_HANDLER(6);
3625 static DEFINE_HANDLER(7);
3626
mtip_disable_link_opts(struct driver_data * dd,struct pci_dev * pdev)3627 static void mtip_disable_link_opts(struct driver_data *dd, struct pci_dev *pdev)
3628 {
3629 unsigned short pcie_dev_ctrl;
3630
3631 if (pci_is_pcie(pdev)) {
3632 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &pcie_dev_ctrl);
3633 if (pcie_dev_ctrl & PCI_EXP_DEVCTL_NOSNOOP_EN ||
3634 pcie_dev_ctrl & PCI_EXP_DEVCTL_RELAX_EN) {
3635 dev_info(&dd->pdev->dev,
3636 "Disabling ERO/No-Snoop on bridge device %04x:%04x\n",
3637 pdev->vendor, pdev->device);
3638 pcie_dev_ctrl &= ~(PCI_EXP_DEVCTL_NOSNOOP_EN |
3639 PCI_EXP_DEVCTL_RELAX_EN);
3640 pcie_capability_write_word(pdev, PCI_EXP_DEVCTL,
3641 pcie_dev_ctrl);
3642 }
3643 }
3644 }
3645
mtip_fix_ero_nosnoop(struct driver_data * dd,struct pci_dev * pdev)3646 static void mtip_fix_ero_nosnoop(struct driver_data *dd, struct pci_dev *pdev)
3647 {
3648 /*
3649 * This workaround is specific to AMD/ATI chipset with a PCI upstream
3650 * device with device id 0x5aXX
3651 */
3652 if (pdev->bus && pdev->bus->self) {
3653 if (pdev->bus->self->vendor == PCI_VENDOR_ID_ATI &&
3654 ((pdev->bus->self->device & 0xff00) == 0x5a00)) {
3655 mtip_disable_link_opts(dd, pdev->bus->self);
3656 } else {
3657 /* Check further up the topology */
3658 struct pci_dev *parent_dev = pdev->bus->self;
3659 if (parent_dev->bus &&
3660 parent_dev->bus->parent &&
3661 parent_dev->bus->parent->self &&
3662 parent_dev->bus->parent->self->vendor ==
3663 PCI_VENDOR_ID_ATI &&
3664 (parent_dev->bus->parent->self->device &
3665 0xff00) == 0x5a00) {
3666 mtip_disable_link_opts(dd,
3667 parent_dev->bus->parent->self);
3668 }
3669 }
3670 }
3671 }
3672
3673 /*
3674 * Called for each supported PCI device detected.
3675 *
3676 * This function allocates the private data structure, enables the
3677 * PCI device and then calls the block layer initialization function.
3678 *
3679 * return value
3680 * 0 on success else an error code.
3681 */
mtip_pci_probe(struct pci_dev * pdev,const struct pci_device_id * ent)3682 static int mtip_pci_probe(struct pci_dev *pdev,
3683 const struct pci_device_id *ent)
3684 {
3685 int rv = 0;
3686 struct driver_data *dd = NULL;
3687 char cpu_list[256];
3688 const struct cpumask *node_mask;
3689 int cpu, i = 0, j = 0;
3690 int my_node = NUMA_NO_NODE;
3691
3692 /* Allocate memory for this devices private data. */
3693 my_node = pcibus_to_node(pdev->bus);
3694 if (my_node != NUMA_NO_NODE) {
3695 if (!node_online(my_node))
3696 my_node = mtip_get_next_rr_node();
3697 } else {
3698 dev_info(&pdev->dev, "Kernel not reporting proximity, choosing a node\n");
3699 my_node = mtip_get_next_rr_node();
3700 }
3701 dev_info(&pdev->dev, "NUMA node %d (closest: %d,%d, probe on %d:%d)\n",
3702 my_node, pcibus_to_node(pdev->bus), dev_to_node(&pdev->dev),
3703 cpu_to_node(raw_smp_processor_id()), raw_smp_processor_id());
3704
3705 dd = kzalloc_node(sizeof(struct driver_data), GFP_KERNEL, my_node);
3706 if (!dd)
3707 return -ENOMEM;
3708
3709 /* Attach the private data to this PCI device. */
3710 pci_set_drvdata(pdev, dd);
3711
3712 rv = pcim_enable_device(pdev);
3713 if (rv < 0) {
3714 dev_err(&pdev->dev, "Unable to enable device\n");
3715 goto iomap_err;
3716 }
3717
3718 rv = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
3719 if (rv) {
3720 dev_warn(&pdev->dev, "64-bit DMA enable failed\n");
3721 goto setmask_err;
3722 }
3723
3724 /* Copy the info we may need later into the private data structure. */
3725 dd->major = mtip_major;
3726 dd->instance = instance;
3727 dd->pdev = pdev;
3728 dd->numa_node = my_node;
3729
3730 memset(dd->workq_name, 0, 32);
3731 snprintf(dd->workq_name, 31, "mtipq%d", dd->instance);
3732
3733 dd->isr_workq = create_workqueue(dd->workq_name);
3734 if (!dd->isr_workq) {
3735 dev_warn(&pdev->dev, "Can't create wq %d\n", dd->instance);
3736 rv = -ENOMEM;
3737 goto setmask_err;
3738 }
3739
3740 memset(cpu_list, 0, sizeof(cpu_list));
3741
3742 node_mask = cpumask_of_node(dd->numa_node);
3743 if (!cpumask_empty(node_mask)) {
3744 for_each_cpu(cpu, node_mask)
3745 {
3746 snprintf(&cpu_list[j], 256 - j, "%d ", cpu);
3747 j = strlen(cpu_list);
3748 }
3749
3750 dev_info(&pdev->dev, "Node %d on package %d has %d cpu(s): %s\n",
3751 dd->numa_node,
3752 topology_physical_package_id(cpumask_first(node_mask)),
3753 nr_cpus_node(dd->numa_node),
3754 cpu_list);
3755 } else
3756 dev_dbg(&pdev->dev, "mtip32xx: node_mask empty\n");
3757
3758 dd->isr_binding = get_least_used_cpu_on_node(dd->numa_node);
3759 dev_info(&pdev->dev, "Initial IRQ binding node:cpu %d:%d\n",
3760 cpu_to_node(dd->isr_binding), dd->isr_binding);
3761
3762 /* first worker context always runs in ISR */
3763 dd->work[0].cpu_binding = dd->isr_binding;
3764 dd->work[1].cpu_binding = get_least_used_cpu_on_node(dd->numa_node);
3765 dd->work[2].cpu_binding = get_least_used_cpu_on_node(dd->numa_node);
3766 dd->work[3].cpu_binding = dd->work[0].cpu_binding;
3767 dd->work[4].cpu_binding = dd->work[1].cpu_binding;
3768 dd->work[5].cpu_binding = dd->work[2].cpu_binding;
3769 dd->work[6].cpu_binding = dd->work[2].cpu_binding;
3770 dd->work[7].cpu_binding = dd->work[1].cpu_binding;
3771
3772 /* Log the bindings */
3773 for_each_present_cpu(cpu) {
3774 memset(cpu_list, 0, sizeof(cpu_list));
3775 for (i = 0, j = 0; i < MTIP_MAX_SLOT_GROUPS; i++) {
3776 if (dd->work[i].cpu_binding == cpu) {
3777 snprintf(&cpu_list[j], 256 - j, "%d ", i);
3778 j = strlen(cpu_list);
3779 }
3780 }
3781 if (j)
3782 dev_info(&pdev->dev, "CPU %d: WQs %s\n", cpu, cpu_list);
3783 }
3784
3785 INIT_WORK(&dd->work[0].work, mtip_workq_sdbf0);
3786 INIT_WORK(&dd->work[1].work, mtip_workq_sdbf1);
3787 INIT_WORK(&dd->work[2].work, mtip_workq_sdbf2);
3788 INIT_WORK(&dd->work[3].work, mtip_workq_sdbf3);
3789 INIT_WORK(&dd->work[4].work, mtip_workq_sdbf4);
3790 INIT_WORK(&dd->work[5].work, mtip_workq_sdbf5);
3791 INIT_WORK(&dd->work[6].work, mtip_workq_sdbf6);
3792 INIT_WORK(&dd->work[7].work, mtip_workq_sdbf7);
3793
3794 pci_set_master(pdev);
3795 rv = pci_enable_msi(pdev);
3796 if (rv) {
3797 dev_warn(&pdev->dev,
3798 "Unable to enable MSI interrupt.\n");
3799 goto msi_initialize_err;
3800 }
3801
3802 mtip_fix_ero_nosnoop(dd, pdev);
3803
3804 /* Initialize the block layer. */
3805 rv = mtip_block_initialize(dd);
3806 if (rv < 0) {
3807 dev_err(&pdev->dev,
3808 "Unable to initialize block layer\n");
3809 goto block_initialize_err;
3810 }
3811
3812 /*
3813 * Increment the instance count so that each device has a unique
3814 * instance number.
3815 */
3816 instance++;
3817 if (rv != MTIP_FTL_REBUILD_MAGIC)
3818 set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
3819 else
3820 rv = 0; /* device in rebuild state, return 0 from probe */
3821
3822 goto done;
3823
3824 block_initialize_err:
3825 pci_disable_msi(pdev);
3826
3827 msi_initialize_err:
3828 if (dd->isr_workq) {
3829 destroy_workqueue(dd->isr_workq);
3830 drop_cpu(dd->work[0].cpu_binding);
3831 drop_cpu(dd->work[1].cpu_binding);
3832 drop_cpu(dd->work[2].cpu_binding);
3833 }
3834 setmask_err:
3835 pcim_iounmap_regions(pdev, 1 << MTIP_ABAR);
3836
3837 iomap_err:
3838 kfree(dd);
3839 pci_set_drvdata(pdev, NULL);
3840 return rv;
3841 done:
3842 return rv;
3843 }
3844
3845 /*
3846 * Called for each probed device when the device is removed or the
3847 * driver is unloaded.
3848 *
3849 * return value
3850 * None
3851 */
mtip_pci_remove(struct pci_dev * pdev)3852 static void mtip_pci_remove(struct pci_dev *pdev)
3853 {
3854 struct driver_data *dd = pci_get_drvdata(pdev);
3855 unsigned long to;
3856
3857 mtip_check_surprise_removal(dd);
3858 synchronize_irq(dd->pdev->irq);
3859
3860 /* Spin until workers are done */
3861 to = jiffies + msecs_to_jiffies(4000);
3862 do {
3863 msleep(20);
3864 } while (atomic_read(&dd->irq_workers_active) != 0 &&
3865 time_before(jiffies, to));
3866
3867 if (atomic_read(&dd->irq_workers_active) != 0) {
3868 dev_warn(&dd->pdev->dev,
3869 "Completion workers still active!\n");
3870 }
3871
3872 set_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag);
3873
3874 if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag))
3875 del_gendisk(dd->disk);
3876
3877 mtip_hw_debugfs_exit(dd);
3878
3879 if (dd->mtip_svc_handler) {
3880 set_bit(MTIP_PF_SVC_THD_STOP_BIT, &dd->port->flags);
3881 wake_up_interruptible(&dd->port->svc_wait);
3882 kthread_stop(dd->mtip_svc_handler);
3883 }
3884
3885 if (!dd->sr) {
3886 /*
3887 * Explicitly wait here for IOs to quiesce,
3888 * as mtip_standby_drive usually won't wait for IOs.
3889 */
3890 if (!mtip_quiesce_io(dd->port, MTIP_QUIESCE_IO_TIMEOUT_MS))
3891 mtip_standby_drive(dd);
3892 }
3893 else
3894 dev_info(&dd->pdev->dev, "device %s surprise removal\n",
3895 dd->disk->disk_name);
3896
3897 blk_mq_free_tag_set(&dd->tags);
3898
3899 /* De-initialize the protocol layer. */
3900 mtip_hw_exit(dd);
3901
3902 if (dd->isr_workq) {
3903 destroy_workqueue(dd->isr_workq);
3904 drop_cpu(dd->work[0].cpu_binding);
3905 drop_cpu(dd->work[1].cpu_binding);
3906 drop_cpu(dd->work[2].cpu_binding);
3907 }
3908
3909 pci_disable_msi(pdev);
3910
3911 pcim_iounmap_regions(pdev, 1 << MTIP_ABAR);
3912 pci_set_drvdata(pdev, NULL);
3913
3914 put_disk(dd->disk);
3915 }
3916
3917 /*
3918 * Called for each probed device when the device is suspended.
3919 *
3920 * return value
3921 * 0 Success
3922 * <0 Error
3923 */
mtip_pci_suspend(struct device * dev)3924 static int __maybe_unused mtip_pci_suspend(struct device *dev)
3925 {
3926 int rv = 0;
3927 struct driver_data *dd = dev_get_drvdata(dev);
3928
3929 set_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag);
3930
3931 /* Disable ports & interrupts then send standby immediate */
3932 rv = mtip_block_suspend(dd);
3933 if (rv < 0)
3934 dev_err(dev, "Failed to suspend controller\n");
3935
3936 return rv;
3937 }
3938
3939 /*
3940 * Called for each probed device when the device is resumed.
3941 *
3942 * return value
3943 * 0 Success
3944 * <0 Error
3945 */
mtip_pci_resume(struct device * dev)3946 static int __maybe_unused mtip_pci_resume(struct device *dev)
3947 {
3948 int rv = 0;
3949 struct driver_data *dd = dev_get_drvdata(dev);
3950
3951 /*
3952 * Calls hbaReset, initPort, & startPort function
3953 * then enables interrupts
3954 */
3955 rv = mtip_block_resume(dd);
3956 if (rv < 0)
3957 dev_err(dev, "Unable to resume\n");
3958
3959 clear_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag);
3960
3961 return rv;
3962 }
3963
3964 /*
3965 * Shutdown routine
3966 *
3967 * return value
3968 * None
3969 */
mtip_pci_shutdown(struct pci_dev * pdev)3970 static void mtip_pci_shutdown(struct pci_dev *pdev)
3971 {
3972 struct driver_data *dd = pci_get_drvdata(pdev);
3973 if (dd)
3974 mtip_block_shutdown(dd);
3975 }
3976
3977 /* Table of device ids supported by this driver. */
3978 static const struct pci_device_id mtip_pci_tbl[] = {
3979 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320H_DEVICE_ID) },
3980 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320M_DEVICE_ID) },
3981 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320S_DEVICE_ID) },
3982 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P325M_DEVICE_ID) },
3983 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420H_DEVICE_ID) },
3984 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420M_DEVICE_ID) },
3985 { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P425M_DEVICE_ID) },
3986 { 0 }
3987 };
3988
3989 static SIMPLE_DEV_PM_OPS(mtip_pci_pm_ops, mtip_pci_suspend, mtip_pci_resume);
3990
3991 /* Structure that describes the PCI driver functions. */
3992 static struct pci_driver mtip_pci_driver = {
3993 .name = MTIP_DRV_NAME,
3994 .id_table = mtip_pci_tbl,
3995 .probe = mtip_pci_probe,
3996 .remove = mtip_pci_remove,
3997 .driver.pm = &mtip_pci_pm_ops,
3998 .shutdown = mtip_pci_shutdown,
3999 };
4000
4001 MODULE_DEVICE_TABLE(pci, mtip_pci_tbl);
4002
4003 /*
4004 * Module initialization function.
4005 *
4006 * Called once when the module is loaded. This function allocates a major
4007 * block device number to the Cyclone devices and registers the PCI layer
4008 * of the driver.
4009 *
4010 * Return value
4011 * 0 on success else error code.
4012 */
mtip_init(void)4013 static int __init mtip_init(void)
4014 {
4015 int error;
4016
4017 pr_info(MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n");
4018
4019 /* Allocate a major block device number to use with this driver. */
4020 error = register_blkdev(0, MTIP_DRV_NAME);
4021 if (error <= 0) {
4022 pr_err("Unable to register block device (%d)\n",
4023 error);
4024 return -EBUSY;
4025 }
4026 mtip_major = error;
4027
4028 dfs_parent = debugfs_create_dir("rssd", NULL);
4029
4030 /* Register our PCI operations. */
4031 error = pci_register_driver(&mtip_pci_driver);
4032 if (error) {
4033 debugfs_remove(dfs_parent);
4034 unregister_blkdev(mtip_major, MTIP_DRV_NAME);
4035 }
4036
4037 return error;
4038 }
4039
4040 /*
4041 * Module de-initialization function.
4042 *
4043 * Called once when the module is unloaded. This function deallocates
4044 * the major block device number allocated by mtip_init() and
4045 * unregisters the PCI layer of the driver.
4046 *
4047 * Return value
4048 * none
4049 */
mtip_exit(void)4050 static void __exit mtip_exit(void)
4051 {
4052 /* Release the allocated major block device number. */
4053 unregister_blkdev(mtip_major, MTIP_DRV_NAME);
4054
4055 /* Unregister the PCI driver. */
4056 pci_unregister_driver(&mtip_pci_driver);
4057
4058 debugfs_remove_recursive(dfs_parent);
4059 }
4060
4061 MODULE_AUTHOR("Micron Technology, Inc");
4062 MODULE_DESCRIPTION("Micron RealSSD PCIe Block Driver");
4063 MODULE_LICENSE("GPL");
4064 MODULE_VERSION(MTIP_DRV_VERSION);
4065
4066 module_init(mtip_init);
4067 module_exit(mtip_exit);
4068