xref: /linux/drivers/block/loop.c (revision e467705a9fb37f51595aa6deaca085ccb4005454)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright 1993 by Theodore Ts'o.
4  */
5 #include <linux/module.h>
6 #include <linux/moduleparam.h>
7 #include <linux/sched.h>
8 #include <linux/fs.h>
9 #include <linux/pagemap.h>
10 #include <linux/file.h>
11 #include <linux/stat.h>
12 #include <linux/errno.h>
13 #include <linux/major.h>
14 #include <linux/wait.h>
15 #include <linux/blkpg.h>
16 #include <linux/init.h>
17 #include <linux/swap.h>
18 #include <linux/slab.h>
19 #include <linux/compat.h>
20 #include <linux/suspend.h>
21 #include <linux/freezer.h>
22 #include <linux/mutex.h>
23 #include <linux/writeback.h>
24 #include <linux/completion.h>
25 #include <linux/highmem.h>
26 #include <linux/splice.h>
27 #include <linux/sysfs.h>
28 #include <linux/miscdevice.h>
29 #include <linux/falloc.h>
30 #include <linux/uio.h>
31 #include <linux/ioprio.h>
32 #include <linux/blk-cgroup.h>
33 #include <linux/sched/mm.h>
34 #include <linux/statfs.h>
35 #include <linux/uaccess.h>
36 #include <linux/blk-mq.h>
37 #include <linux/spinlock.h>
38 #include <uapi/linux/loop.h>
39 
40 /* Possible states of device */
41 enum {
42 	Lo_unbound,
43 	Lo_bound,
44 	Lo_rundown,
45 	Lo_deleting,
46 };
47 
48 struct loop_func_table;
49 
50 struct loop_device {
51 	int		lo_number;
52 	loff_t		lo_offset;
53 	loff_t		lo_sizelimit;
54 	int		lo_flags;
55 	char		lo_file_name[LO_NAME_SIZE];
56 
57 	struct file *	lo_backing_file;
58 	struct block_device *lo_device;
59 
60 	gfp_t		old_gfp_mask;
61 
62 	spinlock_t		lo_lock;
63 	int			lo_state;
64 	spinlock_t              lo_work_lock;
65 	struct workqueue_struct *workqueue;
66 	struct work_struct      rootcg_work;
67 	struct list_head        rootcg_cmd_list;
68 	struct list_head        idle_worker_list;
69 	struct rb_root          worker_tree;
70 	struct timer_list       timer;
71 	bool			use_dio;
72 	bool			sysfs_inited;
73 
74 	struct request_queue	*lo_queue;
75 	struct blk_mq_tag_set	tag_set;
76 	struct gendisk		*lo_disk;
77 	struct mutex		lo_mutex;
78 	bool			idr_visible;
79 };
80 
81 struct loop_cmd {
82 	struct list_head list_entry;
83 	bool use_aio; /* use AIO interface to handle I/O */
84 	atomic_t ref; /* only for aio */
85 	long ret;
86 	struct kiocb iocb;
87 	struct bio_vec *bvec;
88 	struct cgroup_subsys_state *blkcg_css;
89 	struct cgroup_subsys_state *memcg_css;
90 };
91 
92 #define LOOP_IDLE_WORKER_TIMEOUT (60 * HZ)
93 #define LOOP_DEFAULT_HW_Q_DEPTH 128
94 
95 static DEFINE_IDR(loop_index_idr);
96 static DEFINE_MUTEX(loop_ctl_mutex);
97 static DEFINE_MUTEX(loop_validate_mutex);
98 
99 /**
100  * loop_global_lock_killable() - take locks for safe loop_validate_file() test
101  *
102  * @lo: struct loop_device
103  * @global: true if @lo is about to bind another "struct loop_device", false otherwise
104  *
105  * Returns 0 on success, -EINTR otherwise.
106  *
107  * Since loop_validate_file() traverses on other "struct loop_device" if
108  * is_loop_device() is true, we need a global lock for serializing concurrent
109  * loop_configure()/loop_change_fd()/__loop_clr_fd() calls.
110  */
111 static int loop_global_lock_killable(struct loop_device *lo, bool global)
112 {
113 	int err;
114 
115 	if (global) {
116 		err = mutex_lock_killable(&loop_validate_mutex);
117 		if (err)
118 			return err;
119 	}
120 	err = mutex_lock_killable(&lo->lo_mutex);
121 	if (err && global)
122 		mutex_unlock(&loop_validate_mutex);
123 	return err;
124 }
125 
126 /**
127  * loop_global_unlock() - release locks taken by loop_global_lock_killable()
128  *
129  * @lo: struct loop_device
130  * @global: true if @lo was about to bind another "struct loop_device", false otherwise
131  */
132 static void loop_global_unlock(struct loop_device *lo, bool global)
133 {
134 	mutex_unlock(&lo->lo_mutex);
135 	if (global)
136 		mutex_unlock(&loop_validate_mutex);
137 }
138 
139 static int max_part;
140 static int part_shift;
141 
142 static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file)
143 {
144 	loff_t loopsize;
145 
146 	/* Compute loopsize in bytes */
147 	loopsize = i_size_read(file->f_mapping->host);
148 	if (offset > 0)
149 		loopsize -= offset;
150 	/* offset is beyond i_size, weird but possible */
151 	if (loopsize < 0)
152 		return 0;
153 
154 	if (sizelimit > 0 && sizelimit < loopsize)
155 		loopsize = sizelimit;
156 	/*
157 	 * Unfortunately, if we want to do I/O on the device,
158 	 * the number of 512-byte sectors has to fit into a sector_t.
159 	 */
160 	return loopsize >> 9;
161 }
162 
163 static loff_t get_loop_size(struct loop_device *lo, struct file *file)
164 {
165 	return get_size(lo->lo_offset, lo->lo_sizelimit, file);
166 }
167 
168 /*
169  * We support direct I/O only if lo_offset is aligned with the logical I/O size
170  * of backing device, and the logical block size of loop is bigger than that of
171  * the backing device.
172  */
173 static bool lo_bdev_can_use_dio(struct loop_device *lo,
174 		struct block_device *backing_bdev)
175 {
176 	unsigned short sb_bsize = bdev_logical_block_size(backing_bdev);
177 
178 	if (queue_logical_block_size(lo->lo_queue) < sb_bsize)
179 		return false;
180 	if (lo->lo_offset & (sb_bsize - 1))
181 		return false;
182 	return true;
183 }
184 
185 static void __loop_update_dio(struct loop_device *lo, bool dio)
186 {
187 	struct file *file = lo->lo_backing_file;
188 	struct inode *inode = file->f_mapping->host;
189 	struct block_device *backing_bdev = NULL;
190 	bool use_dio;
191 
192 	if (S_ISBLK(inode->i_mode))
193 		backing_bdev = I_BDEV(inode);
194 	else if (inode->i_sb->s_bdev)
195 		backing_bdev = inode->i_sb->s_bdev;
196 
197 	use_dio = dio && (file->f_mode & FMODE_CAN_ODIRECT) &&
198 		(!backing_bdev || lo_bdev_can_use_dio(lo, backing_bdev));
199 
200 	if (lo->use_dio == use_dio)
201 		return;
202 
203 	/* flush dirty pages before changing direct IO */
204 	vfs_fsync(file, 0);
205 
206 	/*
207 	 * The flag of LO_FLAGS_DIRECT_IO is handled similarly with
208 	 * LO_FLAGS_READ_ONLY, both are set from kernel, and losetup
209 	 * will get updated by ioctl(LOOP_GET_STATUS)
210 	 */
211 	if (lo->lo_state == Lo_bound)
212 		blk_mq_freeze_queue(lo->lo_queue);
213 	lo->use_dio = use_dio;
214 	if (use_dio) {
215 		blk_queue_flag_clear(QUEUE_FLAG_NOMERGES, lo->lo_queue);
216 		lo->lo_flags |= LO_FLAGS_DIRECT_IO;
217 	} else {
218 		blk_queue_flag_set(QUEUE_FLAG_NOMERGES, lo->lo_queue);
219 		lo->lo_flags &= ~LO_FLAGS_DIRECT_IO;
220 	}
221 	if (lo->lo_state == Lo_bound)
222 		blk_mq_unfreeze_queue(lo->lo_queue);
223 }
224 
225 /**
226  * loop_set_size() - sets device size and notifies userspace
227  * @lo: struct loop_device to set the size for
228  * @size: new size of the loop device
229  *
230  * Callers must validate that the size passed into this function fits into
231  * a sector_t, eg using loop_validate_size()
232  */
233 static void loop_set_size(struct loop_device *lo, loff_t size)
234 {
235 	if (!set_capacity_and_notify(lo->lo_disk, size))
236 		kobject_uevent(&disk_to_dev(lo->lo_disk)->kobj, KOBJ_CHANGE);
237 }
238 
239 static int lo_write_bvec(struct file *file, struct bio_vec *bvec, loff_t *ppos)
240 {
241 	struct iov_iter i;
242 	ssize_t bw;
243 
244 	iov_iter_bvec(&i, ITER_SOURCE, bvec, 1, bvec->bv_len);
245 
246 	bw = vfs_iter_write(file, &i, ppos, 0);
247 
248 	if (likely(bw ==  bvec->bv_len))
249 		return 0;
250 
251 	printk_ratelimited(KERN_ERR
252 		"loop: Write error at byte offset %llu, length %i.\n",
253 		(unsigned long long)*ppos, bvec->bv_len);
254 	if (bw >= 0)
255 		bw = -EIO;
256 	return bw;
257 }
258 
259 static int lo_write_simple(struct loop_device *lo, struct request *rq,
260 		loff_t pos)
261 {
262 	struct bio_vec bvec;
263 	struct req_iterator iter;
264 	int ret = 0;
265 
266 	rq_for_each_segment(bvec, rq, iter) {
267 		ret = lo_write_bvec(lo->lo_backing_file, &bvec, &pos);
268 		if (ret < 0)
269 			break;
270 		cond_resched();
271 	}
272 
273 	return ret;
274 }
275 
276 static int lo_read_simple(struct loop_device *lo, struct request *rq,
277 		loff_t pos)
278 {
279 	struct bio_vec bvec;
280 	struct req_iterator iter;
281 	struct iov_iter i;
282 	ssize_t len;
283 
284 	rq_for_each_segment(bvec, rq, iter) {
285 		iov_iter_bvec(&i, ITER_DEST, &bvec, 1, bvec.bv_len);
286 		len = vfs_iter_read(lo->lo_backing_file, &i, &pos, 0);
287 		if (len < 0)
288 			return len;
289 
290 		flush_dcache_page(bvec.bv_page);
291 
292 		if (len != bvec.bv_len) {
293 			struct bio *bio;
294 
295 			__rq_for_each_bio(bio, rq)
296 				zero_fill_bio(bio);
297 			break;
298 		}
299 		cond_resched();
300 	}
301 
302 	return 0;
303 }
304 
305 static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,
306 			int mode)
307 {
308 	/*
309 	 * We use fallocate to manipulate the space mappings used by the image
310 	 * a.k.a. discard/zerorange.
311 	 */
312 	struct file *file = lo->lo_backing_file;
313 	int ret;
314 
315 	mode |= FALLOC_FL_KEEP_SIZE;
316 
317 	if (!bdev_max_discard_sectors(lo->lo_device))
318 		return -EOPNOTSUPP;
319 
320 	ret = file->f_op->fallocate(file, mode, pos, blk_rq_bytes(rq));
321 	if (unlikely(ret && ret != -EINVAL && ret != -EOPNOTSUPP))
322 		return -EIO;
323 	return ret;
324 }
325 
326 static int lo_req_flush(struct loop_device *lo, struct request *rq)
327 {
328 	int ret = vfs_fsync(lo->lo_backing_file, 0);
329 	if (unlikely(ret && ret != -EINVAL))
330 		ret = -EIO;
331 
332 	return ret;
333 }
334 
335 static void lo_complete_rq(struct request *rq)
336 {
337 	struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
338 	blk_status_t ret = BLK_STS_OK;
339 
340 	if (!cmd->use_aio || cmd->ret < 0 || cmd->ret == blk_rq_bytes(rq) ||
341 	    req_op(rq) != REQ_OP_READ) {
342 		if (cmd->ret < 0)
343 			ret = errno_to_blk_status(cmd->ret);
344 		goto end_io;
345 	}
346 
347 	/*
348 	 * Short READ - if we got some data, advance our request and
349 	 * retry it. If we got no data, end the rest with EIO.
350 	 */
351 	if (cmd->ret) {
352 		blk_update_request(rq, BLK_STS_OK, cmd->ret);
353 		cmd->ret = 0;
354 		blk_mq_requeue_request(rq, true);
355 	} else {
356 		if (cmd->use_aio) {
357 			struct bio *bio = rq->bio;
358 
359 			while (bio) {
360 				zero_fill_bio(bio);
361 				bio = bio->bi_next;
362 			}
363 		}
364 		ret = BLK_STS_IOERR;
365 end_io:
366 		blk_mq_end_request(rq, ret);
367 	}
368 }
369 
370 static void lo_rw_aio_do_completion(struct loop_cmd *cmd)
371 {
372 	struct request *rq = blk_mq_rq_from_pdu(cmd);
373 
374 	if (!atomic_dec_and_test(&cmd->ref))
375 		return;
376 	kfree(cmd->bvec);
377 	cmd->bvec = NULL;
378 	if (likely(!blk_should_fake_timeout(rq->q)))
379 		blk_mq_complete_request(rq);
380 }
381 
382 static void lo_rw_aio_complete(struct kiocb *iocb, long ret)
383 {
384 	struct loop_cmd *cmd = container_of(iocb, struct loop_cmd, iocb);
385 
386 	cmd->ret = ret;
387 	lo_rw_aio_do_completion(cmd);
388 }
389 
390 static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
391 		     loff_t pos, int rw)
392 {
393 	struct iov_iter iter;
394 	struct req_iterator rq_iter;
395 	struct bio_vec *bvec;
396 	struct request *rq = blk_mq_rq_from_pdu(cmd);
397 	struct bio *bio = rq->bio;
398 	struct file *file = lo->lo_backing_file;
399 	struct bio_vec tmp;
400 	unsigned int offset;
401 	int nr_bvec = 0;
402 	int ret;
403 
404 	rq_for_each_bvec(tmp, rq, rq_iter)
405 		nr_bvec++;
406 
407 	if (rq->bio != rq->biotail) {
408 
409 		bvec = kmalloc_array(nr_bvec, sizeof(struct bio_vec),
410 				     GFP_NOIO);
411 		if (!bvec)
412 			return -EIO;
413 		cmd->bvec = bvec;
414 
415 		/*
416 		 * The bios of the request may be started from the middle of
417 		 * the 'bvec' because of bio splitting, so we can't directly
418 		 * copy bio->bi_iov_vec to new bvec. The rq_for_each_bvec
419 		 * API will take care of all details for us.
420 		 */
421 		rq_for_each_bvec(tmp, rq, rq_iter) {
422 			*bvec = tmp;
423 			bvec++;
424 		}
425 		bvec = cmd->bvec;
426 		offset = 0;
427 	} else {
428 		/*
429 		 * Same here, this bio may be started from the middle of the
430 		 * 'bvec' because of bio splitting, so offset from the bvec
431 		 * must be passed to iov iterator
432 		 */
433 		offset = bio->bi_iter.bi_bvec_done;
434 		bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter);
435 	}
436 	atomic_set(&cmd->ref, 2);
437 
438 	iov_iter_bvec(&iter, rw, bvec, nr_bvec, blk_rq_bytes(rq));
439 	iter.iov_offset = offset;
440 
441 	cmd->iocb.ki_pos = pos;
442 	cmd->iocb.ki_filp = file;
443 	cmd->iocb.ki_complete = lo_rw_aio_complete;
444 	cmd->iocb.ki_flags = IOCB_DIRECT;
445 	cmd->iocb.ki_ioprio = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_NONE, 0);
446 
447 	if (rw == ITER_SOURCE)
448 		ret = file->f_op->write_iter(&cmd->iocb, &iter);
449 	else
450 		ret = file->f_op->read_iter(&cmd->iocb, &iter);
451 
452 	lo_rw_aio_do_completion(cmd);
453 
454 	if (ret != -EIOCBQUEUED)
455 		lo_rw_aio_complete(&cmd->iocb, ret);
456 	return 0;
457 }
458 
459 static int do_req_filebacked(struct loop_device *lo, struct request *rq)
460 {
461 	struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
462 	loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset;
463 
464 	/*
465 	 * lo_write_simple and lo_read_simple should have been covered
466 	 * by io submit style function like lo_rw_aio(), one blocker
467 	 * is that lo_read_simple() need to call flush_dcache_page after
468 	 * the page is written from kernel, and it isn't easy to handle
469 	 * this in io submit style function which submits all segments
470 	 * of the req at one time. And direct read IO doesn't need to
471 	 * run flush_dcache_page().
472 	 */
473 	switch (req_op(rq)) {
474 	case REQ_OP_FLUSH:
475 		return lo_req_flush(lo, rq);
476 	case REQ_OP_WRITE_ZEROES:
477 		/*
478 		 * If the caller doesn't want deallocation, call zeroout to
479 		 * write zeroes the range.  Otherwise, punch them out.
480 		 */
481 		return lo_fallocate(lo, rq, pos,
482 			(rq->cmd_flags & REQ_NOUNMAP) ?
483 				FALLOC_FL_ZERO_RANGE :
484 				FALLOC_FL_PUNCH_HOLE);
485 	case REQ_OP_DISCARD:
486 		return lo_fallocate(lo, rq, pos, FALLOC_FL_PUNCH_HOLE);
487 	case REQ_OP_WRITE:
488 		if (cmd->use_aio)
489 			return lo_rw_aio(lo, cmd, pos, ITER_SOURCE);
490 		else
491 			return lo_write_simple(lo, rq, pos);
492 	case REQ_OP_READ:
493 		if (cmd->use_aio)
494 			return lo_rw_aio(lo, cmd, pos, ITER_DEST);
495 		else
496 			return lo_read_simple(lo, rq, pos);
497 	default:
498 		WARN_ON_ONCE(1);
499 		return -EIO;
500 	}
501 }
502 
503 static inline void loop_update_dio(struct loop_device *lo)
504 {
505 	__loop_update_dio(lo, (lo->lo_backing_file->f_flags & O_DIRECT) |
506 				lo->use_dio);
507 }
508 
509 static void loop_reread_partitions(struct loop_device *lo)
510 {
511 	int rc;
512 
513 	mutex_lock(&lo->lo_disk->open_mutex);
514 	rc = bdev_disk_changed(lo->lo_disk, false);
515 	mutex_unlock(&lo->lo_disk->open_mutex);
516 	if (rc)
517 		pr_warn("%s: partition scan of loop%d (%s) failed (rc=%d)\n",
518 			__func__, lo->lo_number, lo->lo_file_name, rc);
519 }
520 
521 static inline int is_loop_device(struct file *file)
522 {
523 	struct inode *i = file->f_mapping->host;
524 
525 	return i && S_ISBLK(i->i_mode) && imajor(i) == LOOP_MAJOR;
526 }
527 
528 static int loop_validate_file(struct file *file, struct block_device *bdev)
529 {
530 	struct inode	*inode = file->f_mapping->host;
531 	struct file	*f = file;
532 
533 	/* Avoid recursion */
534 	while (is_loop_device(f)) {
535 		struct loop_device *l;
536 
537 		lockdep_assert_held(&loop_validate_mutex);
538 		if (f->f_mapping->host->i_rdev == bdev->bd_dev)
539 			return -EBADF;
540 
541 		l = I_BDEV(f->f_mapping->host)->bd_disk->private_data;
542 		if (l->lo_state != Lo_bound)
543 			return -EINVAL;
544 		/* Order wrt setting lo->lo_backing_file in loop_configure(). */
545 		rmb();
546 		f = l->lo_backing_file;
547 	}
548 	if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))
549 		return -EINVAL;
550 	return 0;
551 }
552 
553 /*
554  * loop_change_fd switched the backing store of a loopback device to
555  * a new file. This is useful for operating system installers to free up
556  * the original file and in High Availability environments to switch to
557  * an alternative location for the content in case of server meltdown.
558  * This can only work if the loop device is used read-only, and if the
559  * new backing store is the same size and type as the old backing store.
560  */
561 static int loop_change_fd(struct loop_device *lo, struct block_device *bdev,
562 			  unsigned int arg)
563 {
564 	struct file *file = fget(arg);
565 	struct file *old_file;
566 	int error;
567 	bool partscan;
568 	bool is_loop;
569 
570 	if (!file)
571 		return -EBADF;
572 
573 	/* suppress uevents while reconfiguring the device */
574 	dev_set_uevent_suppress(disk_to_dev(lo->lo_disk), 1);
575 
576 	is_loop = is_loop_device(file);
577 	error = loop_global_lock_killable(lo, is_loop);
578 	if (error)
579 		goto out_putf;
580 	error = -ENXIO;
581 	if (lo->lo_state != Lo_bound)
582 		goto out_err;
583 
584 	/* the loop device has to be read-only */
585 	error = -EINVAL;
586 	if (!(lo->lo_flags & LO_FLAGS_READ_ONLY))
587 		goto out_err;
588 
589 	error = loop_validate_file(file, bdev);
590 	if (error)
591 		goto out_err;
592 
593 	old_file = lo->lo_backing_file;
594 
595 	error = -EINVAL;
596 
597 	/* size of the new backing store needs to be the same */
598 	if (get_loop_size(lo, file) != get_loop_size(lo, old_file))
599 		goto out_err;
600 
601 	/* and ... switch */
602 	disk_force_media_change(lo->lo_disk);
603 	blk_mq_freeze_queue(lo->lo_queue);
604 	mapping_set_gfp_mask(old_file->f_mapping, lo->old_gfp_mask);
605 	lo->lo_backing_file = file;
606 	lo->old_gfp_mask = mapping_gfp_mask(file->f_mapping);
607 	mapping_set_gfp_mask(file->f_mapping,
608 			     lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
609 	loop_update_dio(lo);
610 	blk_mq_unfreeze_queue(lo->lo_queue);
611 	partscan = lo->lo_flags & LO_FLAGS_PARTSCAN;
612 	loop_global_unlock(lo, is_loop);
613 
614 	/*
615 	 * Flush loop_validate_file() before fput(), for l->lo_backing_file
616 	 * might be pointing at old_file which might be the last reference.
617 	 */
618 	if (!is_loop) {
619 		mutex_lock(&loop_validate_mutex);
620 		mutex_unlock(&loop_validate_mutex);
621 	}
622 	/*
623 	 * We must drop file reference outside of lo_mutex as dropping
624 	 * the file ref can take open_mutex which creates circular locking
625 	 * dependency.
626 	 */
627 	fput(old_file);
628 	if (partscan)
629 		loop_reread_partitions(lo);
630 
631 	error = 0;
632 done:
633 	/* enable and uncork uevent now that we are done */
634 	dev_set_uevent_suppress(disk_to_dev(lo->lo_disk), 0);
635 	return error;
636 
637 out_err:
638 	loop_global_unlock(lo, is_loop);
639 out_putf:
640 	fput(file);
641 	goto done;
642 }
643 
644 /* loop sysfs attributes */
645 
646 static ssize_t loop_attr_show(struct device *dev, char *page,
647 			      ssize_t (*callback)(struct loop_device *, char *))
648 {
649 	struct gendisk *disk = dev_to_disk(dev);
650 	struct loop_device *lo = disk->private_data;
651 
652 	return callback(lo, page);
653 }
654 
655 #define LOOP_ATTR_RO(_name)						\
656 static ssize_t loop_attr_##_name##_show(struct loop_device *, char *);	\
657 static ssize_t loop_attr_do_show_##_name(struct device *d,		\
658 				struct device_attribute *attr, char *b)	\
659 {									\
660 	return loop_attr_show(d, b, loop_attr_##_name##_show);		\
661 }									\
662 static struct device_attribute loop_attr_##_name =			\
663 	__ATTR(_name, 0444, loop_attr_do_show_##_name, NULL);
664 
665 static ssize_t loop_attr_backing_file_show(struct loop_device *lo, char *buf)
666 {
667 	ssize_t ret;
668 	char *p = NULL;
669 
670 	spin_lock_irq(&lo->lo_lock);
671 	if (lo->lo_backing_file)
672 		p = file_path(lo->lo_backing_file, buf, PAGE_SIZE - 1);
673 	spin_unlock_irq(&lo->lo_lock);
674 
675 	if (IS_ERR_OR_NULL(p))
676 		ret = PTR_ERR(p);
677 	else {
678 		ret = strlen(p);
679 		memmove(buf, p, ret);
680 		buf[ret++] = '\n';
681 		buf[ret] = 0;
682 	}
683 
684 	return ret;
685 }
686 
687 static ssize_t loop_attr_offset_show(struct loop_device *lo, char *buf)
688 {
689 	return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_offset);
690 }
691 
692 static ssize_t loop_attr_sizelimit_show(struct loop_device *lo, char *buf)
693 {
694 	return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
695 }
696 
697 static ssize_t loop_attr_autoclear_show(struct loop_device *lo, char *buf)
698 {
699 	int autoclear = (lo->lo_flags & LO_FLAGS_AUTOCLEAR);
700 
701 	return sysfs_emit(buf, "%s\n", autoclear ? "1" : "0");
702 }
703 
704 static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf)
705 {
706 	int partscan = (lo->lo_flags & LO_FLAGS_PARTSCAN);
707 
708 	return sysfs_emit(buf, "%s\n", partscan ? "1" : "0");
709 }
710 
711 static ssize_t loop_attr_dio_show(struct loop_device *lo, char *buf)
712 {
713 	int dio = (lo->lo_flags & LO_FLAGS_DIRECT_IO);
714 
715 	return sysfs_emit(buf, "%s\n", dio ? "1" : "0");
716 }
717 
718 LOOP_ATTR_RO(backing_file);
719 LOOP_ATTR_RO(offset);
720 LOOP_ATTR_RO(sizelimit);
721 LOOP_ATTR_RO(autoclear);
722 LOOP_ATTR_RO(partscan);
723 LOOP_ATTR_RO(dio);
724 
725 static struct attribute *loop_attrs[] = {
726 	&loop_attr_backing_file.attr,
727 	&loop_attr_offset.attr,
728 	&loop_attr_sizelimit.attr,
729 	&loop_attr_autoclear.attr,
730 	&loop_attr_partscan.attr,
731 	&loop_attr_dio.attr,
732 	NULL,
733 };
734 
735 static struct attribute_group loop_attribute_group = {
736 	.name = "loop",
737 	.attrs= loop_attrs,
738 };
739 
740 static void loop_sysfs_init(struct loop_device *lo)
741 {
742 	lo->sysfs_inited = !sysfs_create_group(&disk_to_dev(lo->lo_disk)->kobj,
743 						&loop_attribute_group);
744 }
745 
746 static void loop_sysfs_exit(struct loop_device *lo)
747 {
748 	if (lo->sysfs_inited)
749 		sysfs_remove_group(&disk_to_dev(lo->lo_disk)->kobj,
750 				   &loop_attribute_group);
751 }
752 
753 static void loop_config_discard(struct loop_device *lo,
754 		struct queue_limits *lim)
755 {
756 	struct file *file = lo->lo_backing_file;
757 	struct inode *inode = file->f_mapping->host;
758 	u32 granularity = 0, max_discard_sectors = 0;
759 	struct kstatfs sbuf;
760 
761 	/*
762 	 * If the backing device is a block device, mirror its zeroing
763 	 * capability. Set the discard sectors to the block device's zeroing
764 	 * capabilities because loop discards result in blkdev_issue_zeroout(),
765 	 * not blkdev_issue_discard(). This maintains consistent behavior with
766 	 * file-backed loop devices: discarded regions read back as zero.
767 	 */
768 	if (S_ISBLK(inode->i_mode)) {
769 		struct request_queue *backingq = bdev_get_queue(I_BDEV(inode));
770 
771 		max_discard_sectors = backingq->limits.max_write_zeroes_sectors;
772 		granularity = bdev_discard_granularity(I_BDEV(inode)) ?:
773 			queue_physical_block_size(backingq);
774 
775 	/*
776 	 * We use punch hole to reclaim the free space used by the
777 	 * image a.k.a. discard.
778 	 */
779 	} else if (file->f_op->fallocate && !vfs_statfs(&file->f_path, &sbuf)) {
780 		max_discard_sectors = UINT_MAX >> 9;
781 		granularity = sbuf.f_bsize;
782 	}
783 
784 	lim->max_hw_discard_sectors = max_discard_sectors;
785 	lim->max_write_zeroes_sectors = max_discard_sectors;
786 	if (max_discard_sectors)
787 		lim->discard_granularity = granularity;
788 	else
789 		lim->discard_granularity = 0;
790 }
791 
792 struct loop_worker {
793 	struct rb_node rb_node;
794 	struct work_struct work;
795 	struct list_head cmd_list;
796 	struct list_head idle_list;
797 	struct loop_device *lo;
798 	struct cgroup_subsys_state *blkcg_css;
799 	unsigned long last_ran_at;
800 };
801 
802 static void loop_workfn(struct work_struct *work);
803 
804 #ifdef CONFIG_BLK_CGROUP
805 static inline int queue_on_root_worker(struct cgroup_subsys_state *css)
806 {
807 	return !css || css == blkcg_root_css;
808 }
809 #else
810 static inline int queue_on_root_worker(struct cgroup_subsys_state *css)
811 {
812 	return !css;
813 }
814 #endif
815 
816 static void loop_queue_work(struct loop_device *lo, struct loop_cmd *cmd)
817 {
818 	struct rb_node **node, *parent = NULL;
819 	struct loop_worker *cur_worker, *worker = NULL;
820 	struct work_struct *work;
821 	struct list_head *cmd_list;
822 
823 	spin_lock_irq(&lo->lo_work_lock);
824 
825 	if (queue_on_root_worker(cmd->blkcg_css))
826 		goto queue_work;
827 
828 	node = &lo->worker_tree.rb_node;
829 
830 	while (*node) {
831 		parent = *node;
832 		cur_worker = container_of(*node, struct loop_worker, rb_node);
833 		if (cur_worker->blkcg_css == cmd->blkcg_css) {
834 			worker = cur_worker;
835 			break;
836 		} else if ((long)cur_worker->blkcg_css < (long)cmd->blkcg_css) {
837 			node = &(*node)->rb_left;
838 		} else {
839 			node = &(*node)->rb_right;
840 		}
841 	}
842 	if (worker)
843 		goto queue_work;
844 
845 	worker = kzalloc(sizeof(struct loop_worker), GFP_NOWAIT | __GFP_NOWARN);
846 	/*
847 	 * In the event we cannot allocate a worker, just queue on the
848 	 * rootcg worker and issue the I/O as the rootcg
849 	 */
850 	if (!worker) {
851 		cmd->blkcg_css = NULL;
852 		if (cmd->memcg_css)
853 			css_put(cmd->memcg_css);
854 		cmd->memcg_css = NULL;
855 		goto queue_work;
856 	}
857 
858 	worker->blkcg_css = cmd->blkcg_css;
859 	css_get(worker->blkcg_css);
860 	INIT_WORK(&worker->work, loop_workfn);
861 	INIT_LIST_HEAD(&worker->cmd_list);
862 	INIT_LIST_HEAD(&worker->idle_list);
863 	worker->lo = lo;
864 	rb_link_node(&worker->rb_node, parent, node);
865 	rb_insert_color(&worker->rb_node, &lo->worker_tree);
866 queue_work:
867 	if (worker) {
868 		/*
869 		 * We need to remove from the idle list here while
870 		 * holding the lock so that the idle timer doesn't
871 		 * free the worker
872 		 */
873 		if (!list_empty(&worker->idle_list))
874 			list_del_init(&worker->idle_list);
875 		work = &worker->work;
876 		cmd_list = &worker->cmd_list;
877 	} else {
878 		work = &lo->rootcg_work;
879 		cmd_list = &lo->rootcg_cmd_list;
880 	}
881 	list_add_tail(&cmd->list_entry, cmd_list);
882 	queue_work(lo->workqueue, work);
883 	spin_unlock_irq(&lo->lo_work_lock);
884 }
885 
886 static void loop_set_timer(struct loop_device *lo)
887 {
888 	timer_reduce(&lo->timer, jiffies + LOOP_IDLE_WORKER_TIMEOUT);
889 }
890 
891 static void loop_free_idle_workers(struct loop_device *lo, bool delete_all)
892 {
893 	struct loop_worker *pos, *worker;
894 
895 	spin_lock_irq(&lo->lo_work_lock);
896 	list_for_each_entry_safe(worker, pos, &lo->idle_worker_list,
897 				idle_list) {
898 		if (!delete_all &&
899 		    time_is_after_jiffies(worker->last_ran_at +
900 					  LOOP_IDLE_WORKER_TIMEOUT))
901 			break;
902 		list_del(&worker->idle_list);
903 		rb_erase(&worker->rb_node, &lo->worker_tree);
904 		css_put(worker->blkcg_css);
905 		kfree(worker);
906 	}
907 	if (!list_empty(&lo->idle_worker_list))
908 		loop_set_timer(lo);
909 	spin_unlock_irq(&lo->lo_work_lock);
910 }
911 
912 static void loop_free_idle_workers_timer(struct timer_list *timer)
913 {
914 	struct loop_device *lo = container_of(timer, struct loop_device, timer);
915 
916 	return loop_free_idle_workers(lo, false);
917 }
918 
919 static void loop_update_rotational(struct loop_device *lo)
920 {
921 	struct file *file = lo->lo_backing_file;
922 	struct inode *file_inode = file->f_mapping->host;
923 	struct block_device *file_bdev = file_inode->i_sb->s_bdev;
924 	struct request_queue *q = lo->lo_queue;
925 	bool nonrot = true;
926 
927 	/* not all filesystems (e.g. tmpfs) have a sb->s_bdev */
928 	if (file_bdev)
929 		nonrot = bdev_nonrot(file_bdev);
930 
931 	if (nonrot)
932 		blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
933 	else
934 		blk_queue_flag_clear(QUEUE_FLAG_NONROT, q);
935 }
936 
937 /**
938  * loop_set_status_from_info - configure device from loop_info
939  * @lo: struct loop_device to configure
940  * @info: struct loop_info64 to configure the device with
941  *
942  * Configures the loop device parameters according to the passed
943  * in loop_info64 configuration.
944  */
945 static int
946 loop_set_status_from_info(struct loop_device *lo,
947 			  const struct loop_info64 *info)
948 {
949 	if ((unsigned int) info->lo_encrypt_key_size > LO_KEY_SIZE)
950 		return -EINVAL;
951 
952 	switch (info->lo_encrypt_type) {
953 	case LO_CRYPT_NONE:
954 		break;
955 	case LO_CRYPT_XOR:
956 		pr_warn("support for the xor transformation has been removed.\n");
957 		return -EINVAL;
958 	case LO_CRYPT_CRYPTOAPI:
959 		pr_warn("support for cryptoloop has been removed.  Use dm-crypt instead.\n");
960 		return -EINVAL;
961 	default:
962 		return -EINVAL;
963 	}
964 
965 	/* Avoid assigning overflow values */
966 	if (info->lo_offset > LLONG_MAX || info->lo_sizelimit > LLONG_MAX)
967 		return -EOVERFLOW;
968 
969 	lo->lo_offset = info->lo_offset;
970 	lo->lo_sizelimit = info->lo_sizelimit;
971 
972 	memcpy(lo->lo_file_name, info->lo_file_name, LO_NAME_SIZE);
973 	lo->lo_file_name[LO_NAME_SIZE-1] = 0;
974 	lo->lo_flags = info->lo_flags;
975 	return 0;
976 }
977 
978 static int loop_reconfigure_limits(struct loop_device *lo, unsigned short bsize,
979 		bool update_discard_settings)
980 {
981 	struct queue_limits lim;
982 
983 	lim = queue_limits_start_update(lo->lo_queue);
984 	lim.logical_block_size = bsize;
985 	lim.physical_block_size = bsize;
986 	lim.io_min = bsize;
987 	if (update_discard_settings)
988 		loop_config_discard(lo, &lim);
989 	return queue_limits_commit_update(lo->lo_queue, &lim);
990 }
991 
992 static int loop_configure(struct loop_device *lo, blk_mode_t mode,
993 			  struct block_device *bdev,
994 			  const struct loop_config *config)
995 {
996 	struct file *file = fget(config->fd);
997 	struct inode *inode;
998 	struct address_space *mapping;
999 	int error;
1000 	loff_t size;
1001 	bool partscan;
1002 	unsigned short bsize;
1003 	bool is_loop;
1004 
1005 	if (!file)
1006 		return -EBADF;
1007 	is_loop = is_loop_device(file);
1008 
1009 	/* This is safe, since we have a reference from open(). */
1010 	__module_get(THIS_MODULE);
1011 
1012 	/*
1013 	 * If we don't hold exclusive handle for the device, upgrade to it
1014 	 * here to avoid changing device under exclusive owner.
1015 	 */
1016 	if (!(mode & BLK_OPEN_EXCL)) {
1017 		error = bd_prepare_to_claim(bdev, loop_configure, NULL);
1018 		if (error)
1019 			goto out_putf;
1020 	}
1021 
1022 	error = loop_global_lock_killable(lo, is_loop);
1023 	if (error)
1024 		goto out_bdev;
1025 
1026 	error = -EBUSY;
1027 	if (lo->lo_state != Lo_unbound)
1028 		goto out_unlock;
1029 
1030 	error = loop_validate_file(file, bdev);
1031 	if (error)
1032 		goto out_unlock;
1033 
1034 	mapping = file->f_mapping;
1035 	inode = mapping->host;
1036 
1037 	if ((config->info.lo_flags & ~LOOP_CONFIGURE_SETTABLE_FLAGS) != 0) {
1038 		error = -EINVAL;
1039 		goto out_unlock;
1040 	}
1041 
1042 	if (config->block_size) {
1043 		error = blk_validate_block_size(config->block_size);
1044 		if (error)
1045 			goto out_unlock;
1046 	}
1047 
1048 	error = loop_set_status_from_info(lo, &config->info);
1049 	if (error)
1050 		goto out_unlock;
1051 
1052 	if (!(file->f_mode & FMODE_WRITE) || !(mode & BLK_OPEN_WRITE) ||
1053 	    !file->f_op->write_iter)
1054 		lo->lo_flags |= LO_FLAGS_READ_ONLY;
1055 
1056 	if (!lo->workqueue) {
1057 		lo->workqueue = alloc_workqueue("loop%d",
1058 						WQ_UNBOUND | WQ_FREEZABLE,
1059 						0, lo->lo_number);
1060 		if (!lo->workqueue) {
1061 			error = -ENOMEM;
1062 			goto out_unlock;
1063 		}
1064 	}
1065 
1066 	/* suppress uevents while reconfiguring the device */
1067 	dev_set_uevent_suppress(disk_to_dev(lo->lo_disk), 1);
1068 
1069 	disk_force_media_change(lo->lo_disk);
1070 	set_disk_ro(lo->lo_disk, (lo->lo_flags & LO_FLAGS_READ_ONLY) != 0);
1071 
1072 	lo->use_dio = lo->lo_flags & LO_FLAGS_DIRECT_IO;
1073 	lo->lo_device = bdev;
1074 	lo->lo_backing_file = file;
1075 	lo->old_gfp_mask = mapping_gfp_mask(mapping);
1076 	mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
1077 
1078 	if (!(lo->lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
1079 		blk_queue_write_cache(lo->lo_queue, true, false);
1080 
1081 	if (config->block_size)
1082 		bsize = config->block_size;
1083 	else if ((lo->lo_backing_file->f_flags & O_DIRECT) && inode->i_sb->s_bdev)
1084 		/* In case of direct I/O, match underlying block size */
1085 		bsize = bdev_logical_block_size(inode->i_sb->s_bdev);
1086 	else
1087 		bsize = 512;
1088 
1089 	error = loop_reconfigure_limits(lo, bsize, true);
1090 	if (WARN_ON_ONCE(error))
1091 		goto out_unlock;
1092 
1093 	loop_update_rotational(lo);
1094 	loop_update_dio(lo);
1095 	loop_sysfs_init(lo);
1096 
1097 	size = get_loop_size(lo, file);
1098 	loop_set_size(lo, size);
1099 
1100 	/* Order wrt reading lo_state in loop_validate_file(). */
1101 	wmb();
1102 
1103 	lo->lo_state = Lo_bound;
1104 	if (part_shift)
1105 		lo->lo_flags |= LO_FLAGS_PARTSCAN;
1106 	partscan = lo->lo_flags & LO_FLAGS_PARTSCAN;
1107 	if (partscan)
1108 		clear_bit(GD_SUPPRESS_PART_SCAN, &lo->lo_disk->state);
1109 
1110 	/* enable and uncork uevent now that we are done */
1111 	dev_set_uevent_suppress(disk_to_dev(lo->lo_disk), 0);
1112 
1113 	loop_global_unlock(lo, is_loop);
1114 	if (partscan)
1115 		loop_reread_partitions(lo);
1116 
1117 	if (!(mode & BLK_OPEN_EXCL))
1118 		bd_abort_claiming(bdev, loop_configure);
1119 
1120 	return 0;
1121 
1122 out_unlock:
1123 	loop_global_unlock(lo, is_loop);
1124 out_bdev:
1125 	if (!(mode & BLK_OPEN_EXCL))
1126 		bd_abort_claiming(bdev, loop_configure);
1127 out_putf:
1128 	fput(file);
1129 	/* This is safe: open() is still holding a reference. */
1130 	module_put(THIS_MODULE);
1131 	return error;
1132 }
1133 
1134 static void __loop_clr_fd(struct loop_device *lo, bool release)
1135 {
1136 	struct file *filp;
1137 	gfp_t gfp = lo->old_gfp_mask;
1138 
1139 	if (test_bit(QUEUE_FLAG_WC, &lo->lo_queue->queue_flags))
1140 		blk_queue_write_cache(lo->lo_queue, false, false);
1141 
1142 	/*
1143 	 * Freeze the request queue when unbinding on a live file descriptor and
1144 	 * thus an open device.  When called from ->release we are guaranteed
1145 	 * that there is no I/O in progress already.
1146 	 */
1147 	if (!release)
1148 		blk_mq_freeze_queue(lo->lo_queue);
1149 
1150 	spin_lock_irq(&lo->lo_lock);
1151 	filp = lo->lo_backing_file;
1152 	lo->lo_backing_file = NULL;
1153 	spin_unlock_irq(&lo->lo_lock);
1154 
1155 	lo->lo_device = NULL;
1156 	lo->lo_offset = 0;
1157 	lo->lo_sizelimit = 0;
1158 	memset(lo->lo_file_name, 0, LO_NAME_SIZE);
1159 	loop_reconfigure_limits(lo, 512, false);
1160 	invalidate_disk(lo->lo_disk);
1161 	loop_sysfs_exit(lo);
1162 	/* let user-space know about this change */
1163 	kobject_uevent(&disk_to_dev(lo->lo_disk)->kobj, KOBJ_CHANGE);
1164 	mapping_set_gfp_mask(filp->f_mapping, gfp);
1165 	/* This is safe: open() is still holding a reference. */
1166 	module_put(THIS_MODULE);
1167 	if (!release)
1168 		blk_mq_unfreeze_queue(lo->lo_queue);
1169 
1170 	disk_force_media_change(lo->lo_disk);
1171 
1172 	if (lo->lo_flags & LO_FLAGS_PARTSCAN) {
1173 		int err;
1174 
1175 		/*
1176 		 * open_mutex has been held already in release path, so don't
1177 		 * acquire it if this function is called in such case.
1178 		 *
1179 		 * If the reread partition isn't from release path, lo_refcnt
1180 		 * must be at least one and it can only become zero when the
1181 		 * current holder is released.
1182 		 */
1183 		if (!release)
1184 			mutex_lock(&lo->lo_disk->open_mutex);
1185 		err = bdev_disk_changed(lo->lo_disk, false);
1186 		if (!release)
1187 			mutex_unlock(&lo->lo_disk->open_mutex);
1188 		if (err)
1189 			pr_warn("%s: partition scan of loop%d failed (rc=%d)\n",
1190 				__func__, lo->lo_number, err);
1191 		/* Device is gone, no point in returning error */
1192 	}
1193 
1194 	/*
1195 	 * lo->lo_state is set to Lo_unbound here after above partscan has
1196 	 * finished. There cannot be anybody else entering __loop_clr_fd() as
1197 	 * Lo_rundown state protects us from all the other places trying to
1198 	 * change the 'lo' device.
1199 	 */
1200 	lo->lo_flags = 0;
1201 	if (!part_shift)
1202 		set_bit(GD_SUPPRESS_PART_SCAN, &lo->lo_disk->state);
1203 	mutex_lock(&lo->lo_mutex);
1204 	lo->lo_state = Lo_unbound;
1205 	mutex_unlock(&lo->lo_mutex);
1206 
1207 	/*
1208 	 * Need not hold lo_mutex to fput backing file. Calling fput holding
1209 	 * lo_mutex triggers a circular lock dependency possibility warning as
1210 	 * fput can take open_mutex which is usually taken before lo_mutex.
1211 	 */
1212 	fput(filp);
1213 }
1214 
1215 static int loop_clr_fd(struct loop_device *lo)
1216 {
1217 	int err;
1218 
1219 	/*
1220 	 * Since lo_ioctl() is called without locks held, it is possible that
1221 	 * loop_configure()/loop_change_fd() and loop_clr_fd() run in parallel.
1222 	 *
1223 	 * Therefore, use global lock when setting Lo_rundown state in order to
1224 	 * make sure that loop_validate_file() will fail if the "struct file"
1225 	 * which loop_configure()/loop_change_fd() found via fget() was this
1226 	 * loop device.
1227 	 */
1228 	err = loop_global_lock_killable(lo, true);
1229 	if (err)
1230 		return err;
1231 	if (lo->lo_state != Lo_bound) {
1232 		loop_global_unlock(lo, true);
1233 		return -ENXIO;
1234 	}
1235 	/*
1236 	 * If we've explicitly asked to tear down the loop device,
1237 	 * and it has an elevated reference count, set it for auto-teardown when
1238 	 * the last reference goes away. This stops $!~#$@ udev from
1239 	 * preventing teardown because it decided that it needs to run blkid on
1240 	 * the loopback device whenever they appear. xfstests is notorious for
1241 	 * failing tests because blkid via udev races with a losetup
1242 	 * <dev>/do something like mkfs/losetup -d <dev> causing the losetup -d
1243 	 * command to fail with EBUSY.
1244 	 */
1245 	if (disk_openers(lo->lo_disk) > 1) {
1246 		lo->lo_flags |= LO_FLAGS_AUTOCLEAR;
1247 		loop_global_unlock(lo, true);
1248 		return 0;
1249 	}
1250 	lo->lo_state = Lo_rundown;
1251 	loop_global_unlock(lo, true);
1252 
1253 	__loop_clr_fd(lo, false);
1254 	return 0;
1255 }
1256 
1257 static int
1258 loop_set_status(struct loop_device *lo, const struct loop_info64 *info)
1259 {
1260 	int err;
1261 	int prev_lo_flags;
1262 	bool partscan = false;
1263 	bool size_changed = false;
1264 
1265 	err = mutex_lock_killable(&lo->lo_mutex);
1266 	if (err)
1267 		return err;
1268 	if (lo->lo_state != Lo_bound) {
1269 		err = -ENXIO;
1270 		goto out_unlock;
1271 	}
1272 
1273 	if (lo->lo_offset != info->lo_offset ||
1274 	    lo->lo_sizelimit != info->lo_sizelimit) {
1275 		size_changed = true;
1276 		sync_blockdev(lo->lo_device);
1277 		invalidate_bdev(lo->lo_device);
1278 	}
1279 
1280 	/* I/O need to be drained during transfer transition */
1281 	blk_mq_freeze_queue(lo->lo_queue);
1282 
1283 	prev_lo_flags = lo->lo_flags;
1284 
1285 	err = loop_set_status_from_info(lo, info);
1286 	if (err)
1287 		goto out_unfreeze;
1288 
1289 	/* Mask out flags that can't be set using LOOP_SET_STATUS. */
1290 	lo->lo_flags &= LOOP_SET_STATUS_SETTABLE_FLAGS;
1291 	/* For those flags, use the previous values instead */
1292 	lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_SETTABLE_FLAGS;
1293 	/* For flags that can't be cleared, use previous values too */
1294 	lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_CLEARABLE_FLAGS;
1295 
1296 	if (size_changed) {
1297 		loff_t new_size = get_size(lo->lo_offset, lo->lo_sizelimit,
1298 					   lo->lo_backing_file);
1299 		loop_set_size(lo, new_size);
1300 	}
1301 
1302 	/* update dio if lo_offset or transfer is changed */
1303 	__loop_update_dio(lo, lo->use_dio);
1304 
1305 out_unfreeze:
1306 	blk_mq_unfreeze_queue(lo->lo_queue);
1307 
1308 	if (!err && (lo->lo_flags & LO_FLAGS_PARTSCAN) &&
1309 	     !(prev_lo_flags & LO_FLAGS_PARTSCAN)) {
1310 		clear_bit(GD_SUPPRESS_PART_SCAN, &lo->lo_disk->state);
1311 		partscan = true;
1312 	}
1313 out_unlock:
1314 	mutex_unlock(&lo->lo_mutex);
1315 	if (partscan)
1316 		loop_reread_partitions(lo);
1317 
1318 	return err;
1319 }
1320 
1321 static int
1322 loop_get_status(struct loop_device *lo, struct loop_info64 *info)
1323 {
1324 	struct path path;
1325 	struct kstat stat;
1326 	int ret;
1327 
1328 	ret = mutex_lock_killable(&lo->lo_mutex);
1329 	if (ret)
1330 		return ret;
1331 	if (lo->lo_state != Lo_bound) {
1332 		mutex_unlock(&lo->lo_mutex);
1333 		return -ENXIO;
1334 	}
1335 
1336 	memset(info, 0, sizeof(*info));
1337 	info->lo_number = lo->lo_number;
1338 	info->lo_offset = lo->lo_offset;
1339 	info->lo_sizelimit = lo->lo_sizelimit;
1340 	info->lo_flags = lo->lo_flags;
1341 	memcpy(info->lo_file_name, lo->lo_file_name, LO_NAME_SIZE);
1342 
1343 	/* Drop lo_mutex while we call into the filesystem. */
1344 	path = lo->lo_backing_file->f_path;
1345 	path_get(&path);
1346 	mutex_unlock(&lo->lo_mutex);
1347 	ret = vfs_getattr(&path, &stat, STATX_INO, AT_STATX_SYNC_AS_STAT);
1348 	if (!ret) {
1349 		info->lo_device = huge_encode_dev(stat.dev);
1350 		info->lo_inode = stat.ino;
1351 		info->lo_rdevice = huge_encode_dev(stat.rdev);
1352 	}
1353 	path_put(&path);
1354 	return ret;
1355 }
1356 
1357 static void
1358 loop_info64_from_old(const struct loop_info *info, struct loop_info64 *info64)
1359 {
1360 	memset(info64, 0, sizeof(*info64));
1361 	info64->lo_number = info->lo_number;
1362 	info64->lo_device = info->lo_device;
1363 	info64->lo_inode = info->lo_inode;
1364 	info64->lo_rdevice = info->lo_rdevice;
1365 	info64->lo_offset = info->lo_offset;
1366 	info64->lo_sizelimit = 0;
1367 	info64->lo_flags = info->lo_flags;
1368 	memcpy(info64->lo_file_name, info->lo_name, LO_NAME_SIZE);
1369 }
1370 
1371 static int
1372 loop_info64_to_old(const struct loop_info64 *info64, struct loop_info *info)
1373 {
1374 	memset(info, 0, sizeof(*info));
1375 	info->lo_number = info64->lo_number;
1376 	info->lo_device = info64->lo_device;
1377 	info->lo_inode = info64->lo_inode;
1378 	info->lo_rdevice = info64->lo_rdevice;
1379 	info->lo_offset = info64->lo_offset;
1380 	info->lo_flags = info64->lo_flags;
1381 	memcpy(info->lo_name, info64->lo_file_name, LO_NAME_SIZE);
1382 
1383 	/* error in case values were truncated */
1384 	if (info->lo_device != info64->lo_device ||
1385 	    info->lo_rdevice != info64->lo_rdevice ||
1386 	    info->lo_inode != info64->lo_inode ||
1387 	    info->lo_offset != info64->lo_offset)
1388 		return -EOVERFLOW;
1389 
1390 	return 0;
1391 }
1392 
1393 static int
1394 loop_set_status_old(struct loop_device *lo, const struct loop_info __user *arg)
1395 {
1396 	struct loop_info info;
1397 	struct loop_info64 info64;
1398 
1399 	if (copy_from_user(&info, arg, sizeof (struct loop_info)))
1400 		return -EFAULT;
1401 	loop_info64_from_old(&info, &info64);
1402 	return loop_set_status(lo, &info64);
1403 }
1404 
1405 static int
1406 loop_set_status64(struct loop_device *lo, const struct loop_info64 __user *arg)
1407 {
1408 	struct loop_info64 info64;
1409 
1410 	if (copy_from_user(&info64, arg, sizeof (struct loop_info64)))
1411 		return -EFAULT;
1412 	return loop_set_status(lo, &info64);
1413 }
1414 
1415 static int
1416 loop_get_status_old(struct loop_device *lo, struct loop_info __user *arg) {
1417 	struct loop_info info;
1418 	struct loop_info64 info64;
1419 	int err;
1420 
1421 	if (!arg)
1422 		return -EINVAL;
1423 	err = loop_get_status(lo, &info64);
1424 	if (!err)
1425 		err = loop_info64_to_old(&info64, &info);
1426 	if (!err && copy_to_user(arg, &info, sizeof(info)))
1427 		err = -EFAULT;
1428 
1429 	return err;
1430 }
1431 
1432 static int
1433 loop_get_status64(struct loop_device *lo, struct loop_info64 __user *arg) {
1434 	struct loop_info64 info64;
1435 	int err;
1436 
1437 	if (!arg)
1438 		return -EINVAL;
1439 	err = loop_get_status(lo, &info64);
1440 	if (!err && copy_to_user(arg, &info64, sizeof(info64)))
1441 		err = -EFAULT;
1442 
1443 	return err;
1444 }
1445 
1446 static int loop_set_capacity(struct loop_device *lo)
1447 {
1448 	loff_t size;
1449 
1450 	if (unlikely(lo->lo_state != Lo_bound))
1451 		return -ENXIO;
1452 
1453 	size = get_loop_size(lo, lo->lo_backing_file);
1454 	loop_set_size(lo, size);
1455 
1456 	return 0;
1457 }
1458 
1459 static int loop_set_dio(struct loop_device *lo, unsigned long arg)
1460 {
1461 	int error = -ENXIO;
1462 	if (lo->lo_state != Lo_bound)
1463 		goto out;
1464 
1465 	__loop_update_dio(lo, !!arg);
1466 	if (lo->use_dio == !!arg)
1467 		return 0;
1468 	error = -EINVAL;
1469  out:
1470 	return error;
1471 }
1472 
1473 static int loop_set_block_size(struct loop_device *lo, unsigned long arg)
1474 {
1475 	int err = 0;
1476 
1477 	if (lo->lo_state != Lo_bound)
1478 		return -ENXIO;
1479 
1480 	err = blk_validate_block_size(arg);
1481 	if (err)
1482 		return err;
1483 
1484 	if (lo->lo_queue->limits.logical_block_size == arg)
1485 		return 0;
1486 
1487 	sync_blockdev(lo->lo_device);
1488 	invalidate_bdev(lo->lo_device);
1489 
1490 	blk_mq_freeze_queue(lo->lo_queue);
1491 	err = loop_reconfigure_limits(lo, arg, false);
1492 	loop_update_dio(lo);
1493 	blk_mq_unfreeze_queue(lo->lo_queue);
1494 
1495 	return err;
1496 }
1497 
1498 static int lo_simple_ioctl(struct loop_device *lo, unsigned int cmd,
1499 			   unsigned long arg)
1500 {
1501 	int err;
1502 
1503 	err = mutex_lock_killable(&lo->lo_mutex);
1504 	if (err)
1505 		return err;
1506 	switch (cmd) {
1507 	case LOOP_SET_CAPACITY:
1508 		err = loop_set_capacity(lo);
1509 		break;
1510 	case LOOP_SET_DIRECT_IO:
1511 		err = loop_set_dio(lo, arg);
1512 		break;
1513 	case LOOP_SET_BLOCK_SIZE:
1514 		err = loop_set_block_size(lo, arg);
1515 		break;
1516 	default:
1517 		err = -EINVAL;
1518 	}
1519 	mutex_unlock(&lo->lo_mutex);
1520 	return err;
1521 }
1522 
1523 static int lo_ioctl(struct block_device *bdev, blk_mode_t mode,
1524 	unsigned int cmd, unsigned long arg)
1525 {
1526 	struct loop_device *lo = bdev->bd_disk->private_data;
1527 	void __user *argp = (void __user *) arg;
1528 	int err;
1529 
1530 	switch (cmd) {
1531 	case LOOP_SET_FD: {
1532 		/*
1533 		 * Legacy case - pass in a zeroed out struct loop_config with
1534 		 * only the file descriptor set , which corresponds with the
1535 		 * default parameters we'd have used otherwise.
1536 		 */
1537 		struct loop_config config;
1538 
1539 		memset(&config, 0, sizeof(config));
1540 		config.fd = arg;
1541 
1542 		return loop_configure(lo, mode, bdev, &config);
1543 	}
1544 	case LOOP_CONFIGURE: {
1545 		struct loop_config config;
1546 
1547 		if (copy_from_user(&config, argp, sizeof(config)))
1548 			return -EFAULT;
1549 
1550 		return loop_configure(lo, mode, bdev, &config);
1551 	}
1552 	case LOOP_CHANGE_FD:
1553 		return loop_change_fd(lo, bdev, arg);
1554 	case LOOP_CLR_FD:
1555 		return loop_clr_fd(lo);
1556 	case LOOP_SET_STATUS:
1557 		err = -EPERM;
1558 		if ((mode & BLK_OPEN_WRITE) || capable(CAP_SYS_ADMIN))
1559 			err = loop_set_status_old(lo, argp);
1560 		break;
1561 	case LOOP_GET_STATUS:
1562 		return loop_get_status_old(lo, argp);
1563 	case LOOP_SET_STATUS64:
1564 		err = -EPERM;
1565 		if ((mode & BLK_OPEN_WRITE) || capable(CAP_SYS_ADMIN))
1566 			err = loop_set_status64(lo, argp);
1567 		break;
1568 	case LOOP_GET_STATUS64:
1569 		return loop_get_status64(lo, argp);
1570 	case LOOP_SET_CAPACITY:
1571 	case LOOP_SET_DIRECT_IO:
1572 	case LOOP_SET_BLOCK_SIZE:
1573 		if (!(mode & BLK_OPEN_WRITE) && !capable(CAP_SYS_ADMIN))
1574 			return -EPERM;
1575 		fallthrough;
1576 	default:
1577 		err = lo_simple_ioctl(lo, cmd, arg);
1578 		break;
1579 	}
1580 
1581 	return err;
1582 }
1583 
1584 #ifdef CONFIG_COMPAT
1585 struct compat_loop_info {
1586 	compat_int_t	lo_number;      /* ioctl r/o */
1587 	compat_dev_t	lo_device;      /* ioctl r/o */
1588 	compat_ulong_t	lo_inode;       /* ioctl r/o */
1589 	compat_dev_t	lo_rdevice;     /* ioctl r/o */
1590 	compat_int_t	lo_offset;
1591 	compat_int_t	lo_encrypt_type;        /* obsolete, ignored */
1592 	compat_int_t	lo_encrypt_key_size;    /* ioctl w/o */
1593 	compat_int_t	lo_flags;       /* ioctl r/o */
1594 	char		lo_name[LO_NAME_SIZE];
1595 	unsigned char	lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
1596 	compat_ulong_t	lo_init[2];
1597 	char		reserved[4];
1598 };
1599 
1600 /*
1601  * Transfer 32-bit compatibility structure in userspace to 64-bit loop info
1602  * - noinlined to reduce stack space usage in main part of driver
1603  */
1604 static noinline int
1605 loop_info64_from_compat(const struct compat_loop_info __user *arg,
1606 			struct loop_info64 *info64)
1607 {
1608 	struct compat_loop_info info;
1609 
1610 	if (copy_from_user(&info, arg, sizeof(info)))
1611 		return -EFAULT;
1612 
1613 	memset(info64, 0, sizeof(*info64));
1614 	info64->lo_number = info.lo_number;
1615 	info64->lo_device = info.lo_device;
1616 	info64->lo_inode = info.lo_inode;
1617 	info64->lo_rdevice = info.lo_rdevice;
1618 	info64->lo_offset = info.lo_offset;
1619 	info64->lo_sizelimit = 0;
1620 	info64->lo_flags = info.lo_flags;
1621 	memcpy(info64->lo_file_name, info.lo_name, LO_NAME_SIZE);
1622 	return 0;
1623 }
1624 
1625 /*
1626  * Transfer 64-bit loop info to 32-bit compatibility structure in userspace
1627  * - noinlined to reduce stack space usage in main part of driver
1628  */
1629 static noinline int
1630 loop_info64_to_compat(const struct loop_info64 *info64,
1631 		      struct compat_loop_info __user *arg)
1632 {
1633 	struct compat_loop_info info;
1634 
1635 	memset(&info, 0, sizeof(info));
1636 	info.lo_number = info64->lo_number;
1637 	info.lo_device = info64->lo_device;
1638 	info.lo_inode = info64->lo_inode;
1639 	info.lo_rdevice = info64->lo_rdevice;
1640 	info.lo_offset = info64->lo_offset;
1641 	info.lo_flags = info64->lo_flags;
1642 	memcpy(info.lo_name, info64->lo_file_name, LO_NAME_SIZE);
1643 
1644 	/* error in case values were truncated */
1645 	if (info.lo_device != info64->lo_device ||
1646 	    info.lo_rdevice != info64->lo_rdevice ||
1647 	    info.lo_inode != info64->lo_inode ||
1648 	    info.lo_offset != info64->lo_offset)
1649 		return -EOVERFLOW;
1650 
1651 	if (copy_to_user(arg, &info, sizeof(info)))
1652 		return -EFAULT;
1653 	return 0;
1654 }
1655 
1656 static int
1657 loop_set_status_compat(struct loop_device *lo,
1658 		       const struct compat_loop_info __user *arg)
1659 {
1660 	struct loop_info64 info64;
1661 	int ret;
1662 
1663 	ret = loop_info64_from_compat(arg, &info64);
1664 	if (ret < 0)
1665 		return ret;
1666 	return loop_set_status(lo, &info64);
1667 }
1668 
1669 static int
1670 loop_get_status_compat(struct loop_device *lo,
1671 		       struct compat_loop_info __user *arg)
1672 {
1673 	struct loop_info64 info64;
1674 	int err;
1675 
1676 	if (!arg)
1677 		return -EINVAL;
1678 	err = loop_get_status(lo, &info64);
1679 	if (!err)
1680 		err = loop_info64_to_compat(&info64, arg);
1681 	return err;
1682 }
1683 
1684 static int lo_compat_ioctl(struct block_device *bdev, blk_mode_t mode,
1685 			   unsigned int cmd, unsigned long arg)
1686 {
1687 	struct loop_device *lo = bdev->bd_disk->private_data;
1688 	int err;
1689 
1690 	switch(cmd) {
1691 	case LOOP_SET_STATUS:
1692 		err = loop_set_status_compat(lo,
1693 			     (const struct compat_loop_info __user *)arg);
1694 		break;
1695 	case LOOP_GET_STATUS:
1696 		err = loop_get_status_compat(lo,
1697 				     (struct compat_loop_info __user *)arg);
1698 		break;
1699 	case LOOP_SET_CAPACITY:
1700 	case LOOP_CLR_FD:
1701 	case LOOP_GET_STATUS64:
1702 	case LOOP_SET_STATUS64:
1703 	case LOOP_CONFIGURE:
1704 		arg = (unsigned long) compat_ptr(arg);
1705 		fallthrough;
1706 	case LOOP_SET_FD:
1707 	case LOOP_CHANGE_FD:
1708 	case LOOP_SET_BLOCK_SIZE:
1709 	case LOOP_SET_DIRECT_IO:
1710 		err = lo_ioctl(bdev, mode, cmd, arg);
1711 		break;
1712 	default:
1713 		err = -ENOIOCTLCMD;
1714 		break;
1715 	}
1716 	return err;
1717 }
1718 #endif
1719 
1720 static void lo_release(struct gendisk *disk)
1721 {
1722 	struct loop_device *lo = disk->private_data;
1723 
1724 	if (disk_openers(disk) > 0)
1725 		return;
1726 
1727 	mutex_lock(&lo->lo_mutex);
1728 	if (lo->lo_state == Lo_bound && (lo->lo_flags & LO_FLAGS_AUTOCLEAR)) {
1729 		lo->lo_state = Lo_rundown;
1730 		mutex_unlock(&lo->lo_mutex);
1731 		/*
1732 		 * In autoclear mode, stop the loop thread
1733 		 * and remove configuration after last close.
1734 		 */
1735 		__loop_clr_fd(lo, true);
1736 		return;
1737 	}
1738 	mutex_unlock(&lo->lo_mutex);
1739 }
1740 
1741 static void lo_free_disk(struct gendisk *disk)
1742 {
1743 	struct loop_device *lo = disk->private_data;
1744 
1745 	if (lo->workqueue)
1746 		destroy_workqueue(lo->workqueue);
1747 	loop_free_idle_workers(lo, true);
1748 	timer_shutdown_sync(&lo->timer);
1749 	mutex_destroy(&lo->lo_mutex);
1750 	kfree(lo);
1751 }
1752 
1753 static const struct block_device_operations lo_fops = {
1754 	.owner =	THIS_MODULE,
1755 	.release =	lo_release,
1756 	.ioctl =	lo_ioctl,
1757 #ifdef CONFIG_COMPAT
1758 	.compat_ioctl =	lo_compat_ioctl,
1759 #endif
1760 	.free_disk =	lo_free_disk,
1761 };
1762 
1763 /*
1764  * And now the modules code and kernel interface.
1765  */
1766 
1767 /*
1768  * If max_loop is specified, create that many devices upfront.
1769  * This also becomes a hard limit. If max_loop is not specified,
1770  * the default isn't a hard limit (as before commit 85c50197716c
1771  * changed the default value from 0 for max_loop=0 reasons), just
1772  * create CONFIG_BLK_DEV_LOOP_MIN_COUNT loop devices at module
1773  * init time. Loop devices can be requested on-demand with the
1774  * /dev/loop-control interface, or be instantiated by accessing
1775  * a 'dead' device node.
1776  */
1777 static int max_loop = CONFIG_BLK_DEV_LOOP_MIN_COUNT;
1778 
1779 #ifdef CONFIG_BLOCK_LEGACY_AUTOLOAD
1780 static bool max_loop_specified;
1781 
1782 static int max_loop_param_set_int(const char *val,
1783 				  const struct kernel_param *kp)
1784 {
1785 	int ret;
1786 
1787 	ret = param_set_int(val, kp);
1788 	if (ret < 0)
1789 		return ret;
1790 
1791 	max_loop_specified = true;
1792 	return 0;
1793 }
1794 
1795 static const struct kernel_param_ops max_loop_param_ops = {
1796 	.set = max_loop_param_set_int,
1797 	.get = param_get_int,
1798 };
1799 
1800 module_param_cb(max_loop, &max_loop_param_ops, &max_loop, 0444);
1801 MODULE_PARM_DESC(max_loop, "Maximum number of loop devices");
1802 #else
1803 module_param(max_loop, int, 0444);
1804 MODULE_PARM_DESC(max_loop, "Initial number of loop devices");
1805 #endif
1806 
1807 module_param(max_part, int, 0444);
1808 MODULE_PARM_DESC(max_part, "Maximum number of partitions per loop device");
1809 
1810 static int hw_queue_depth = LOOP_DEFAULT_HW_Q_DEPTH;
1811 
1812 static int loop_set_hw_queue_depth(const char *s, const struct kernel_param *p)
1813 {
1814 	int qd, ret;
1815 
1816 	ret = kstrtoint(s, 0, &qd);
1817 	if (ret < 0)
1818 		return ret;
1819 	if (qd < 1)
1820 		return -EINVAL;
1821 	hw_queue_depth = qd;
1822 	return 0;
1823 }
1824 
1825 static const struct kernel_param_ops loop_hw_qdepth_param_ops = {
1826 	.set	= loop_set_hw_queue_depth,
1827 	.get	= param_get_int,
1828 };
1829 
1830 device_param_cb(hw_queue_depth, &loop_hw_qdepth_param_ops, &hw_queue_depth, 0444);
1831 MODULE_PARM_DESC(hw_queue_depth, "Queue depth for each hardware queue. Default: " __stringify(LOOP_DEFAULT_HW_Q_DEPTH));
1832 
1833 MODULE_LICENSE("GPL");
1834 MODULE_ALIAS_BLOCKDEV_MAJOR(LOOP_MAJOR);
1835 
1836 static blk_status_t loop_queue_rq(struct blk_mq_hw_ctx *hctx,
1837 		const struct blk_mq_queue_data *bd)
1838 {
1839 	struct request *rq = bd->rq;
1840 	struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
1841 	struct loop_device *lo = rq->q->queuedata;
1842 
1843 	blk_mq_start_request(rq);
1844 
1845 	if (lo->lo_state != Lo_bound)
1846 		return BLK_STS_IOERR;
1847 
1848 	switch (req_op(rq)) {
1849 	case REQ_OP_FLUSH:
1850 	case REQ_OP_DISCARD:
1851 	case REQ_OP_WRITE_ZEROES:
1852 		cmd->use_aio = false;
1853 		break;
1854 	default:
1855 		cmd->use_aio = lo->use_dio;
1856 		break;
1857 	}
1858 
1859 	/* always use the first bio's css */
1860 	cmd->blkcg_css = NULL;
1861 	cmd->memcg_css = NULL;
1862 #ifdef CONFIG_BLK_CGROUP
1863 	if (rq->bio) {
1864 		cmd->blkcg_css = bio_blkcg_css(rq->bio);
1865 #ifdef CONFIG_MEMCG
1866 		if (cmd->blkcg_css) {
1867 			cmd->memcg_css =
1868 				cgroup_get_e_css(cmd->blkcg_css->cgroup,
1869 						&memory_cgrp_subsys);
1870 		}
1871 #endif
1872 	}
1873 #endif
1874 	loop_queue_work(lo, cmd);
1875 
1876 	return BLK_STS_OK;
1877 }
1878 
1879 static void loop_handle_cmd(struct loop_cmd *cmd)
1880 {
1881 	struct cgroup_subsys_state *cmd_blkcg_css = cmd->blkcg_css;
1882 	struct cgroup_subsys_state *cmd_memcg_css = cmd->memcg_css;
1883 	struct request *rq = blk_mq_rq_from_pdu(cmd);
1884 	const bool write = op_is_write(req_op(rq));
1885 	struct loop_device *lo = rq->q->queuedata;
1886 	int ret = 0;
1887 	struct mem_cgroup *old_memcg = NULL;
1888 	const bool use_aio = cmd->use_aio;
1889 
1890 	if (write && (lo->lo_flags & LO_FLAGS_READ_ONLY)) {
1891 		ret = -EIO;
1892 		goto failed;
1893 	}
1894 
1895 	if (cmd_blkcg_css)
1896 		kthread_associate_blkcg(cmd_blkcg_css);
1897 	if (cmd_memcg_css)
1898 		old_memcg = set_active_memcg(
1899 			mem_cgroup_from_css(cmd_memcg_css));
1900 
1901 	/*
1902 	 * do_req_filebacked() may call blk_mq_complete_request() synchronously
1903 	 * or asynchronously if using aio. Hence, do not touch 'cmd' after
1904 	 * do_req_filebacked() has returned unless we are sure that 'cmd' has
1905 	 * not yet been completed.
1906 	 */
1907 	ret = do_req_filebacked(lo, rq);
1908 
1909 	if (cmd_blkcg_css)
1910 		kthread_associate_blkcg(NULL);
1911 
1912 	if (cmd_memcg_css) {
1913 		set_active_memcg(old_memcg);
1914 		css_put(cmd_memcg_css);
1915 	}
1916  failed:
1917 	/* complete non-aio request */
1918 	if (!use_aio || ret) {
1919 		if (ret == -EOPNOTSUPP)
1920 			cmd->ret = ret;
1921 		else
1922 			cmd->ret = ret ? -EIO : 0;
1923 		if (likely(!blk_should_fake_timeout(rq->q)))
1924 			blk_mq_complete_request(rq);
1925 	}
1926 }
1927 
1928 static void loop_process_work(struct loop_worker *worker,
1929 			struct list_head *cmd_list, struct loop_device *lo)
1930 {
1931 	int orig_flags = current->flags;
1932 	struct loop_cmd *cmd;
1933 
1934 	current->flags |= PF_LOCAL_THROTTLE | PF_MEMALLOC_NOIO;
1935 	spin_lock_irq(&lo->lo_work_lock);
1936 	while (!list_empty(cmd_list)) {
1937 		cmd = container_of(
1938 			cmd_list->next, struct loop_cmd, list_entry);
1939 		list_del(cmd_list->next);
1940 		spin_unlock_irq(&lo->lo_work_lock);
1941 
1942 		loop_handle_cmd(cmd);
1943 		cond_resched();
1944 
1945 		spin_lock_irq(&lo->lo_work_lock);
1946 	}
1947 
1948 	/*
1949 	 * We only add to the idle list if there are no pending cmds
1950 	 * *and* the worker will not run again which ensures that it
1951 	 * is safe to free any worker on the idle list
1952 	 */
1953 	if (worker && !work_pending(&worker->work)) {
1954 		worker->last_ran_at = jiffies;
1955 		list_add_tail(&worker->idle_list, &lo->idle_worker_list);
1956 		loop_set_timer(lo);
1957 	}
1958 	spin_unlock_irq(&lo->lo_work_lock);
1959 	current->flags = orig_flags;
1960 }
1961 
1962 static void loop_workfn(struct work_struct *work)
1963 {
1964 	struct loop_worker *worker =
1965 		container_of(work, struct loop_worker, work);
1966 	loop_process_work(worker, &worker->cmd_list, worker->lo);
1967 }
1968 
1969 static void loop_rootcg_workfn(struct work_struct *work)
1970 {
1971 	struct loop_device *lo =
1972 		container_of(work, struct loop_device, rootcg_work);
1973 	loop_process_work(NULL, &lo->rootcg_cmd_list, lo);
1974 }
1975 
1976 static const struct blk_mq_ops loop_mq_ops = {
1977 	.queue_rq       = loop_queue_rq,
1978 	.complete	= lo_complete_rq,
1979 };
1980 
1981 static int loop_add(int i)
1982 {
1983 	struct queue_limits lim = {
1984 		/*
1985 		 * Random number picked from the historic block max_sectors cap.
1986 		 */
1987 		.max_hw_sectors		= 2560u,
1988 	};
1989 	struct loop_device *lo;
1990 	struct gendisk *disk;
1991 	int err;
1992 
1993 	err = -ENOMEM;
1994 	lo = kzalloc(sizeof(*lo), GFP_KERNEL);
1995 	if (!lo)
1996 		goto out;
1997 	lo->worker_tree = RB_ROOT;
1998 	INIT_LIST_HEAD(&lo->idle_worker_list);
1999 	timer_setup(&lo->timer, loop_free_idle_workers_timer, TIMER_DEFERRABLE);
2000 	lo->lo_state = Lo_unbound;
2001 
2002 	err = mutex_lock_killable(&loop_ctl_mutex);
2003 	if (err)
2004 		goto out_free_dev;
2005 
2006 	/* allocate id, if @id >= 0, we're requesting that specific id */
2007 	if (i >= 0) {
2008 		err = idr_alloc(&loop_index_idr, lo, i, i + 1, GFP_KERNEL);
2009 		if (err == -ENOSPC)
2010 			err = -EEXIST;
2011 	} else {
2012 		err = idr_alloc(&loop_index_idr, lo, 0, 0, GFP_KERNEL);
2013 	}
2014 	mutex_unlock(&loop_ctl_mutex);
2015 	if (err < 0)
2016 		goto out_free_dev;
2017 	i = err;
2018 
2019 	lo->tag_set.ops = &loop_mq_ops;
2020 	lo->tag_set.nr_hw_queues = 1;
2021 	lo->tag_set.queue_depth = hw_queue_depth;
2022 	lo->tag_set.numa_node = NUMA_NO_NODE;
2023 	lo->tag_set.cmd_size = sizeof(struct loop_cmd);
2024 	lo->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_STACKING |
2025 		BLK_MQ_F_NO_SCHED_BY_DEFAULT;
2026 	lo->tag_set.driver_data = lo;
2027 
2028 	err = blk_mq_alloc_tag_set(&lo->tag_set);
2029 	if (err)
2030 		goto out_free_idr;
2031 
2032 	disk = lo->lo_disk = blk_mq_alloc_disk(&lo->tag_set, &lim, lo);
2033 	if (IS_ERR(disk)) {
2034 		err = PTR_ERR(disk);
2035 		goto out_cleanup_tags;
2036 	}
2037 	lo->lo_queue = lo->lo_disk->queue;
2038 
2039 	/*
2040 	 * By default, we do buffer IO, so it doesn't make sense to enable
2041 	 * merge because the I/O submitted to backing file is handled page by
2042 	 * page. For directio mode, merge does help to dispatch bigger request
2043 	 * to underlayer disk. We will enable merge once directio is enabled.
2044 	 */
2045 	blk_queue_flag_set(QUEUE_FLAG_NOMERGES, lo->lo_queue);
2046 
2047 	/*
2048 	 * Disable partition scanning by default. The in-kernel partition
2049 	 * scanning can be requested individually per-device during its
2050 	 * setup. Userspace can always add and remove partitions from all
2051 	 * devices. The needed partition minors are allocated from the
2052 	 * extended minor space, the main loop device numbers will continue
2053 	 * to match the loop minors, regardless of the number of partitions
2054 	 * used.
2055 	 *
2056 	 * If max_part is given, partition scanning is globally enabled for
2057 	 * all loop devices. The minors for the main loop devices will be
2058 	 * multiples of max_part.
2059 	 *
2060 	 * Note: Global-for-all-devices, set-only-at-init, read-only module
2061 	 * parameteters like 'max_loop' and 'max_part' make things needlessly
2062 	 * complicated, are too static, inflexible and may surprise
2063 	 * userspace tools. Parameters like this in general should be avoided.
2064 	 */
2065 	if (!part_shift)
2066 		set_bit(GD_SUPPRESS_PART_SCAN, &disk->state);
2067 	mutex_init(&lo->lo_mutex);
2068 	lo->lo_number		= i;
2069 	spin_lock_init(&lo->lo_lock);
2070 	spin_lock_init(&lo->lo_work_lock);
2071 	INIT_WORK(&lo->rootcg_work, loop_rootcg_workfn);
2072 	INIT_LIST_HEAD(&lo->rootcg_cmd_list);
2073 	disk->major		= LOOP_MAJOR;
2074 	disk->first_minor	= i << part_shift;
2075 	disk->minors		= 1 << part_shift;
2076 	disk->fops		= &lo_fops;
2077 	disk->private_data	= lo;
2078 	disk->queue		= lo->lo_queue;
2079 	disk->events		= DISK_EVENT_MEDIA_CHANGE;
2080 	disk->event_flags	= DISK_EVENT_FLAG_UEVENT;
2081 	sprintf(disk->disk_name, "loop%d", i);
2082 	/* Make this loop device reachable from pathname. */
2083 	err = add_disk(disk);
2084 	if (err)
2085 		goto out_cleanup_disk;
2086 
2087 	/* Show this loop device. */
2088 	mutex_lock(&loop_ctl_mutex);
2089 	lo->idr_visible = true;
2090 	mutex_unlock(&loop_ctl_mutex);
2091 
2092 	return i;
2093 
2094 out_cleanup_disk:
2095 	put_disk(disk);
2096 out_cleanup_tags:
2097 	blk_mq_free_tag_set(&lo->tag_set);
2098 out_free_idr:
2099 	mutex_lock(&loop_ctl_mutex);
2100 	idr_remove(&loop_index_idr, i);
2101 	mutex_unlock(&loop_ctl_mutex);
2102 out_free_dev:
2103 	kfree(lo);
2104 out:
2105 	return err;
2106 }
2107 
2108 static void loop_remove(struct loop_device *lo)
2109 {
2110 	/* Make this loop device unreachable from pathname. */
2111 	del_gendisk(lo->lo_disk);
2112 	blk_mq_free_tag_set(&lo->tag_set);
2113 
2114 	mutex_lock(&loop_ctl_mutex);
2115 	idr_remove(&loop_index_idr, lo->lo_number);
2116 	mutex_unlock(&loop_ctl_mutex);
2117 
2118 	put_disk(lo->lo_disk);
2119 }
2120 
2121 #ifdef CONFIG_BLOCK_LEGACY_AUTOLOAD
2122 static void loop_probe(dev_t dev)
2123 {
2124 	int idx = MINOR(dev) >> part_shift;
2125 
2126 	if (max_loop_specified && max_loop && idx >= max_loop)
2127 		return;
2128 	loop_add(idx);
2129 }
2130 #else
2131 #define loop_probe NULL
2132 #endif /* !CONFIG_BLOCK_LEGACY_AUTOLOAD */
2133 
2134 static int loop_control_remove(int idx)
2135 {
2136 	struct loop_device *lo;
2137 	int ret;
2138 
2139 	if (idx < 0) {
2140 		pr_warn_once("deleting an unspecified loop device is not supported.\n");
2141 		return -EINVAL;
2142 	}
2143 
2144 	/* Hide this loop device for serialization. */
2145 	ret = mutex_lock_killable(&loop_ctl_mutex);
2146 	if (ret)
2147 		return ret;
2148 	lo = idr_find(&loop_index_idr, idx);
2149 	if (!lo || !lo->idr_visible)
2150 		ret = -ENODEV;
2151 	else
2152 		lo->idr_visible = false;
2153 	mutex_unlock(&loop_ctl_mutex);
2154 	if (ret)
2155 		return ret;
2156 
2157 	/* Check whether this loop device can be removed. */
2158 	ret = mutex_lock_killable(&lo->lo_mutex);
2159 	if (ret)
2160 		goto mark_visible;
2161 	if (lo->lo_state != Lo_unbound || disk_openers(lo->lo_disk) > 0) {
2162 		mutex_unlock(&lo->lo_mutex);
2163 		ret = -EBUSY;
2164 		goto mark_visible;
2165 	}
2166 	/* Mark this loop device as no more bound, but not quite unbound yet */
2167 	lo->lo_state = Lo_deleting;
2168 	mutex_unlock(&lo->lo_mutex);
2169 
2170 	loop_remove(lo);
2171 	return 0;
2172 
2173 mark_visible:
2174 	/* Show this loop device again. */
2175 	mutex_lock(&loop_ctl_mutex);
2176 	lo->idr_visible = true;
2177 	mutex_unlock(&loop_ctl_mutex);
2178 	return ret;
2179 }
2180 
2181 static int loop_control_get_free(int idx)
2182 {
2183 	struct loop_device *lo;
2184 	int id, ret;
2185 
2186 	ret = mutex_lock_killable(&loop_ctl_mutex);
2187 	if (ret)
2188 		return ret;
2189 	idr_for_each_entry(&loop_index_idr, lo, id) {
2190 		/* Hitting a race results in creating a new loop device which is harmless. */
2191 		if (lo->idr_visible && data_race(lo->lo_state) == Lo_unbound)
2192 			goto found;
2193 	}
2194 	mutex_unlock(&loop_ctl_mutex);
2195 	return loop_add(-1);
2196 found:
2197 	mutex_unlock(&loop_ctl_mutex);
2198 	return id;
2199 }
2200 
2201 static long loop_control_ioctl(struct file *file, unsigned int cmd,
2202 			       unsigned long parm)
2203 {
2204 	switch (cmd) {
2205 	case LOOP_CTL_ADD:
2206 		return loop_add(parm);
2207 	case LOOP_CTL_REMOVE:
2208 		return loop_control_remove(parm);
2209 	case LOOP_CTL_GET_FREE:
2210 		return loop_control_get_free(parm);
2211 	default:
2212 		return -ENOSYS;
2213 	}
2214 }
2215 
2216 static const struct file_operations loop_ctl_fops = {
2217 	.open		= nonseekable_open,
2218 	.unlocked_ioctl	= loop_control_ioctl,
2219 	.compat_ioctl	= loop_control_ioctl,
2220 	.owner		= THIS_MODULE,
2221 	.llseek		= noop_llseek,
2222 };
2223 
2224 static struct miscdevice loop_misc = {
2225 	.minor		= LOOP_CTRL_MINOR,
2226 	.name		= "loop-control",
2227 	.fops		= &loop_ctl_fops,
2228 };
2229 
2230 MODULE_ALIAS_MISCDEV(LOOP_CTRL_MINOR);
2231 MODULE_ALIAS("devname:loop-control");
2232 
2233 static int __init loop_init(void)
2234 {
2235 	int i;
2236 	int err;
2237 
2238 	part_shift = 0;
2239 	if (max_part > 0) {
2240 		part_shift = fls(max_part);
2241 
2242 		/*
2243 		 * Adjust max_part according to part_shift as it is exported
2244 		 * to user space so that user can decide correct minor number
2245 		 * if [s]he want to create more devices.
2246 		 *
2247 		 * Note that -1 is required because partition 0 is reserved
2248 		 * for the whole disk.
2249 		 */
2250 		max_part = (1UL << part_shift) - 1;
2251 	}
2252 
2253 	if ((1UL << part_shift) > DISK_MAX_PARTS) {
2254 		err = -EINVAL;
2255 		goto err_out;
2256 	}
2257 
2258 	if (max_loop > 1UL << (MINORBITS - part_shift)) {
2259 		err = -EINVAL;
2260 		goto err_out;
2261 	}
2262 
2263 	err = misc_register(&loop_misc);
2264 	if (err < 0)
2265 		goto err_out;
2266 
2267 
2268 	if (__register_blkdev(LOOP_MAJOR, "loop", loop_probe)) {
2269 		err = -EIO;
2270 		goto misc_out;
2271 	}
2272 
2273 	/* pre-create number of devices given by config or max_loop */
2274 	for (i = 0; i < max_loop; i++)
2275 		loop_add(i);
2276 
2277 	printk(KERN_INFO "loop: module loaded\n");
2278 	return 0;
2279 
2280 misc_out:
2281 	misc_deregister(&loop_misc);
2282 err_out:
2283 	return err;
2284 }
2285 
2286 static void __exit loop_exit(void)
2287 {
2288 	struct loop_device *lo;
2289 	int id;
2290 
2291 	unregister_blkdev(LOOP_MAJOR, "loop");
2292 	misc_deregister(&loop_misc);
2293 
2294 	/*
2295 	 * There is no need to use loop_ctl_mutex here, for nobody else can
2296 	 * access loop_index_idr when this module is unloading (unless forced
2297 	 * module unloading is requested). If this is not a clean unloading,
2298 	 * we have no means to avoid kernel crash.
2299 	 */
2300 	idr_for_each_entry(&loop_index_idr, lo, id)
2301 		loop_remove(lo);
2302 
2303 	idr_destroy(&loop_index_idr);
2304 }
2305 
2306 module_init(loop_init);
2307 module_exit(loop_exit);
2308 
2309 #ifndef MODULE
2310 static int __init max_loop_setup(char *str)
2311 {
2312 	max_loop = simple_strtol(str, NULL, 0);
2313 #ifdef CONFIG_BLOCK_LEGACY_AUTOLOAD
2314 	max_loop_specified = true;
2315 #endif
2316 	return 1;
2317 }
2318 
2319 __setup("max_loop=", max_loop_setup);
2320 #endif
2321