1# 2# Block device driver configuration 3# 4 5menuconfig BLK_DEV 6 bool "Block devices" 7 depends on BLOCK 8 default y 9 ---help--- 10 Say Y here to get to see options for various different block device 11 drivers. This option alone does not add any kernel code. 12 13 If you say N, all options in this submenu will be skipped and disabled; 14 only do this if you know what you are doing. 15 16if BLK_DEV 17 18config BLK_DEV_FD 19 tristate "Normal floppy disk support" 20 depends on ARCH_MAY_HAVE_PC_FDC 21 ---help--- 22 If you want to use the floppy disk drive(s) of your PC under Linux, 23 say Y. Information about this driver, especially important for IBM 24 Thinkpad users, is contained in 25 <file:Documentation/blockdev/floppy.txt>. 26 That file also contains the location of the Floppy driver FAQ as 27 well as location of the fdutils package used to configure additional 28 parameters of the driver at run time. 29 30 To compile this driver as a module, choose M here: the 31 module will be called floppy. 32 33config AMIGA_FLOPPY 34 tristate "Amiga floppy support" 35 depends on AMIGA 36 37config ATARI_FLOPPY 38 tristate "Atari floppy support" 39 depends on ATARI 40 41config MAC_FLOPPY 42 tristate "Support for PowerMac floppy" 43 depends on PPC_PMAC && !PPC_PMAC64 44 help 45 If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple) 46 floppy controller, say Y here. Most commonly found in PowerMacs. 47 48config BLK_DEV_SWIM 49 tristate "Support for SWIM Macintosh floppy" 50 depends on M68K && MAC 51 help 52 You should select this option if you want floppy support 53 and you don't have a II, IIfx, Q900, Q950 or AV series. 54 55config AMIGA_Z2RAM 56 tristate "Amiga Zorro II ramdisk support" 57 depends on ZORRO 58 help 59 This enables support for using Chip RAM and Zorro II RAM as a 60 ramdisk or as a swap partition. Say Y if you want to include this 61 driver in the kernel. 62 63 To compile this driver as a module, choose M here: the 64 module will be called z2ram. 65 66config GDROM 67 tristate "SEGA Dreamcast GD-ROM drive" 68 depends on SH_DREAMCAST 69 help 70 A standard SEGA Dreamcast comes with a modified CD ROM drive called a 71 "GD-ROM" by SEGA to signify it is capable of reading special disks 72 with up to 1 GB of data. This drive will also read standard CD ROM 73 disks. Select this option to access any disks in your GD ROM drive. 74 Most users will want to say "Y" here. 75 You can also build this as a module which will be called gdrom. 76 77config PARIDE 78 tristate "Parallel port IDE device support" 79 depends on PARPORT_PC 80 ---help--- 81 There are many external CD-ROM and disk devices that connect through 82 your computer's parallel port. Most of them are actually IDE devices 83 using a parallel port IDE adapter. This option enables the PARIDE 84 subsystem which contains drivers for many of these external drives. 85 Read <file:Documentation/blockdev/paride.txt> for more information. 86 87 If you have said Y to the "Parallel-port support" configuration 88 option, you may share a single port between your printer and other 89 parallel port devices. Answer Y to build PARIDE support into your 90 kernel, or M if you would like to build it as a loadable module. If 91 your parallel port support is in a loadable module, you must build 92 PARIDE as a module. If you built PARIDE support into your kernel, 93 you may still build the individual protocol modules and high-level 94 drivers as loadable modules. If you build this support as a module, 95 it will be called paride. 96 97 To use the PARIDE support, you must say Y or M here and also to at 98 least one high-level driver (e.g. "Parallel port IDE disks", 99 "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and 100 to at least one protocol driver (e.g. "ATEN EH-100 protocol", 101 "MicroSolutions backpack protocol", "DataStor Commuter protocol" 102 etc.). 103 104source "drivers/block/paride/Kconfig" 105 106source "drivers/block/mtip32xx/Kconfig" 107 108config BLK_CPQ_DA 109 tristate "Compaq SMART2 support" 110 depends on PCI && VIRT_TO_BUS 111 help 112 This is the driver for Compaq Smart Array controllers. Everyone 113 using these boards should say Y here. See the file 114 <file:Documentation/blockdev/cpqarray.txt> for the current list of 115 boards supported by this driver, and for further information on the 116 use of this driver. 117 118config BLK_CPQ_CISS_DA 119 tristate "Compaq Smart Array 5xxx support" 120 depends on PCI 121 select CHECK_SIGNATURE 122 help 123 This is the driver for Compaq Smart Array 5xxx controllers. 124 Everyone using these boards should say Y here. 125 See <file:Documentation/blockdev/cciss.txt> for the current list of 126 boards supported by this driver, and for further information 127 on the use of this driver. 128 129config CISS_SCSI_TAPE 130 bool "SCSI tape drive support for Smart Array 5xxx" 131 depends on BLK_CPQ_CISS_DA && PROC_FS 132 depends on SCSI=y || SCSI=BLK_CPQ_CISS_DA 133 help 134 When enabled (Y), this option allows SCSI tape drives and SCSI medium 135 changers (tape robots) to be accessed via a Compaq 5xxx array 136 controller. (See <file:Documentation/blockdev/cciss.txt> for more details.) 137 138 "SCSI support" and "SCSI tape support" must also be enabled for this 139 option to work. 140 141 When this option is disabled (N), the SCSI portion of the driver 142 is not compiled. 143 144config BLK_DEV_DAC960 145 tristate "Mylex DAC960/DAC1100 PCI RAID Controller support" 146 depends on PCI 147 help 148 This driver adds support for the Mylex DAC960, AcceleRAID, and 149 eXtremeRAID PCI RAID controllers. See the file 150 <file:Documentation/blockdev/README.DAC960> for further information 151 about this driver. 152 153 To compile this driver as a module, choose M here: the 154 module will be called DAC960. 155 156config BLK_DEV_UMEM 157 tristate "Micro Memory MM5415 Battery Backed RAM support" 158 depends on PCI 159 ---help--- 160 Saying Y here will include support for the MM5415 family of 161 battery backed (Non-volatile) RAM cards. 162 <http://www.umem.com/> 163 164 The cards appear as block devices that can be partitioned into 165 as many as 15 partitions. 166 167 To compile this driver as a module, choose M here: the 168 module will be called umem. 169 170 The umem driver has not yet been allocated a MAJOR number, so 171 one is chosen dynamically. 172 173config BLK_DEV_UBD 174 bool "Virtual block device" 175 depends on UML 176 ---help--- 177 The User-Mode Linux port includes a driver called UBD which will let 178 you access arbitrary files on the host computer as block devices. 179 Unless you know that you do not need such virtual block devices say 180 Y here. 181 182config BLK_DEV_UBD_SYNC 183 bool "Always do synchronous disk IO for UBD" 184 depends on BLK_DEV_UBD 185 ---help--- 186 Writes to the virtual block device are not immediately written to the 187 host's disk; this may cause problems if, for example, the User-Mode 188 Linux 'Virtual Machine' uses a journalling filesystem and the host 189 computer crashes. 190 191 Synchronous operation (i.e. always writing data to the host's disk 192 immediately) is configurable on a per-UBD basis by using a special 193 kernel command line option. Alternatively, you can say Y here to 194 turn on synchronous operation by default for all block devices. 195 196 If you're running a journalling file system (like reiserfs, for 197 example) in your virtual machine, you will want to say Y here. If 198 you care for the safety of the data in your virtual machine, Y is a 199 wise choice too. In all other cases (for example, if you're just 200 playing around with User-Mode Linux) you can choose N. 201 202config BLK_DEV_COW_COMMON 203 bool 204 default BLK_DEV_UBD 205 206config BLK_DEV_LOOP 207 tristate "Loopback device support" 208 ---help--- 209 Saying Y here will allow you to use a regular file as a block 210 device; you can then create a file system on that block device and 211 mount it just as you would mount other block devices such as hard 212 drive partitions, CD-ROM drives or floppy drives. The loop devices 213 are block special device files with major number 7 and typically 214 called /dev/loop0, /dev/loop1 etc. 215 216 This is useful if you want to check an ISO 9660 file system before 217 burning the CD, or if you want to use floppy images without first 218 writing them to floppy. Furthermore, some Linux distributions avoid 219 the need for a dedicated Linux partition by keeping their complete 220 root file system inside a DOS FAT file using this loop device 221 driver. 222 223 To use the loop device, you need the losetup utility, found in the 224 util-linux package, see 225 <ftp://ftp.kernel.org/pub/linux/utils/util-linux/>. 226 227 The loop device driver can also be used to "hide" a file system in 228 a disk partition, floppy, or regular file, either using encryption 229 (scrambling the data) or steganography (hiding the data in the low 230 bits of, say, a sound file). This is also safe if the file resides 231 on a remote file server. 232 233 There are several ways of encrypting disks. Some of these require 234 kernel patches. The vanilla kernel offers the cryptoloop option 235 and a Device Mapper target (which is superior, as it supports all 236 file systems). If you want to use the cryptoloop, say Y to both 237 LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12 238 or later) version of util-linux. Additionally, be aware that 239 the cryptoloop is not safe for storing journaled filesystems. 240 241 Note that this loop device has nothing to do with the loopback 242 device used for network connections from the machine to itself. 243 244 To compile this driver as a module, choose M here: the 245 module will be called loop. 246 247 Most users will answer N here. 248 249config BLK_DEV_LOOP_MIN_COUNT 250 int "Number of loop devices to pre-create at init time" 251 depends on BLK_DEV_LOOP 252 default 8 253 help 254 Static number of loop devices to be unconditionally pre-created 255 at init time. 256 257 This default value can be overwritten on the kernel command 258 line or with module-parameter loop.max_loop. 259 260 The historic default is 8. If a late 2011 version of losetup(8) 261 is used, it can be set to 0, since needed loop devices can be 262 dynamically allocated with the /dev/loop-control interface. 263 264config BLK_DEV_CRYPTOLOOP 265 tristate "Cryptoloop Support" 266 select CRYPTO 267 select CRYPTO_CBC 268 depends on BLK_DEV_LOOP 269 ---help--- 270 Say Y here if you want to be able to use the ciphers that are 271 provided by the CryptoAPI as loop transformation. This might be 272 used as hard disk encryption. 273 274 WARNING: This device is not safe for journaled file systems like 275 ext3 or Reiserfs. Please use the Device Mapper crypto module 276 instead, which can be configured to be on-disk compatible with the 277 cryptoloop device. 278 279source "drivers/block/drbd/Kconfig" 280 281config BLK_DEV_NBD 282 tristate "Network block device support" 283 depends on NET 284 ---help--- 285 Saying Y here will allow your computer to be a client for network 286 block devices, i.e. it will be able to use block devices exported by 287 servers (mount file systems on them etc.). Communication between 288 client and server works over TCP/IP networking, but to the client 289 program this is hidden: it looks like a regular local file access to 290 a block device special file such as /dev/nd0. 291 292 Network block devices also allows you to run a block-device in 293 userland (making server and client physically the same computer, 294 communicating using the loopback network device). 295 296 Read <file:Documentation/blockdev/nbd.txt> for more information, 297 especially about where to find the server code, which runs in user 298 space and does not need special kernel support. 299 300 Note that this has nothing to do with the network file systems NFS 301 or Coda; you can say N here even if you intend to use NFS or Coda. 302 303 To compile this driver as a module, choose M here: the 304 module will be called nbd. 305 306 If unsure, say N. 307 308config BLK_DEV_NVME 309 tristate "NVM Express block device" 310 depends on PCI 311 ---help--- 312 The NVM Express driver is for solid state drives directly 313 connected to the PCI or PCI Express bus. If you know you 314 don't have one of these, it is safe to answer N. 315 316 To compile this driver as a module, choose M here: the 317 module will be called nvme. 318 319config BLK_DEV_OSD 320 tristate "OSD object-as-blkdev support" 321 depends on SCSI_OSD_ULD 322 ---help--- 323 Saying Y or M here will allow the exporting of a single SCSI 324 OSD (object-based storage) object as a Linux block device. 325 326 For example, if you create a 2G object on an OSD device, 327 you can then use this module to present that 2G object as 328 a Linux block device. 329 330 To compile this driver as a module, choose M here: the 331 module will be called osdblk. 332 333 If unsure, say N. 334 335config BLK_DEV_SX8 336 tristate "Promise SATA SX8 support" 337 depends on PCI 338 ---help--- 339 Saying Y or M here will enable support for the 340 Promise SATA SX8 controllers. 341 342 Use devices /dev/sx8/$N and /dev/sx8/$Np$M. 343 344config BLK_DEV_RAM 345 tristate "RAM block device support" 346 ---help--- 347 Saying Y here will allow you to use a portion of your RAM memory as 348 a block device, so that you can make file systems on it, read and 349 write to it and do all the other things that you can do with normal 350 block devices (such as hard drives). It is usually used to load and 351 store a copy of a minimal root file system off of a floppy into RAM 352 during the initial install of Linux. 353 354 Note that the kernel command line option "ramdisk=XX" is now obsolete. 355 For details, read <file:Documentation/blockdev/ramdisk.txt>. 356 357 To compile this driver as a module, choose M here: the 358 module will be called rd. 359 360 Most normal users won't need the RAM disk functionality, and can 361 thus say N here. 362 363config BLK_DEV_RAM_COUNT 364 int "Default number of RAM disks" 365 default "16" 366 depends on BLK_DEV_RAM 367 help 368 The default value is 16 RAM disks. Change this if you know what you 369 are doing. If you boot from a filesystem that needs to be extracted 370 in memory, you will need at least one RAM disk (e.g. root on cramfs). 371 372config BLK_DEV_RAM_SIZE 373 int "Default RAM disk size (kbytes)" 374 depends on BLK_DEV_RAM 375 default "4096" 376 help 377 The default value is 4096 kilobytes. Only change this if you know 378 what you are doing. 379 380config BLK_DEV_XIP 381 bool "Support XIP filesystems on RAM block device" 382 depends on BLK_DEV_RAM 383 default n 384 help 385 Support XIP filesystems (such as ext2 with XIP support on) on 386 top of block ram device. This will slightly enlarge the kernel, and 387 will prevent RAM block device backing store memory from being 388 allocated from highmem (only a problem for highmem systems). 389 390config CDROM_PKTCDVD 391 tristate "Packet writing on CD/DVD media" 392 depends on !UML 393 help 394 If you have a CDROM/DVD drive that supports packet writing, say 395 Y to include support. It should work with any MMC/Mt Fuji 396 compliant ATAPI or SCSI drive, which is just about any newer 397 DVD/CD writer. 398 399 Currently only writing to CD-RW, DVD-RW, DVD+RW and DVDRAM discs 400 is possible. 401 DVD-RW disks must be in restricted overwrite mode. 402 403 See the file <file:Documentation/cdrom/packet-writing.txt> 404 for further information on the use of this driver. 405 406 To compile this driver as a module, choose M here: the 407 module will be called pktcdvd. 408 409config CDROM_PKTCDVD_BUFFERS 410 int "Free buffers for data gathering" 411 depends on CDROM_PKTCDVD 412 default "8" 413 help 414 This controls the maximum number of active concurrent packets. More 415 concurrent packets can increase write performance, but also require 416 more memory. Each concurrent packet will require approximately 64Kb 417 of non-swappable kernel memory, memory which will be allocated when 418 a disc is opened for writing. 419 420config CDROM_PKTCDVD_WCACHE 421 bool "Enable write caching" 422 depends on CDROM_PKTCDVD 423 help 424 If enabled, write caching will be set for the CD-R/W device. For now 425 this option is dangerous unless the CD-RW media is known good, as we 426 don't do deferred write error handling yet. 427 428config ATA_OVER_ETH 429 tristate "ATA over Ethernet support" 430 depends on NET 431 help 432 This driver provides Support for ATA over Ethernet block 433 devices like the Coraid EtherDrive (R) Storage Blade. 434 435config MG_DISK 436 tristate "mGine mflash, gflash support" 437 depends on ARM && GPIOLIB 438 help 439 mGine mFlash(gFlash) block device driver 440 441config MG_DISK_RES 442 int "Size of reserved area before MBR" 443 depends on MG_DISK 444 default 0 445 help 446 Define size of reserved area that usually used for boot. Unit is KB. 447 All of the block device operation will be taken this value as start 448 offset 449 Examples: 450 1024 => 1 MB 451 452config SUNVDC 453 tristate "Sun Virtual Disk Client support" 454 depends on SUN_LDOMS 455 help 456 Support for virtual disk devices as a client under Sun 457 Logical Domains. 458 459source "drivers/s390/block/Kconfig" 460 461config XILINX_SYSACE 462 tristate "Xilinx SystemACE support" 463 depends on 4xx || MICROBLAZE 464 help 465 Include support for the Xilinx SystemACE CompactFlash interface 466 467config XEN_BLKDEV_FRONTEND 468 tristate "Xen virtual block device support" 469 depends on XEN 470 default y 471 select XEN_XENBUS_FRONTEND 472 help 473 This driver implements the front-end of the Xen virtual 474 block device driver. It communicates with a back-end driver 475 in another domain which drives the actual block device. 476 477config XEN_BLKDEV_BACKEND 478 tristate "Xen block-device backend driver" 479 depends on XEN_BACKEND 480 help 481 The block-device backend driver allows the kernel to export its 482 block devices to other guests via a high-performance shared-memory 483 interface. 484 485 The corresponding Linux frontend driver is enabled by the 486 CONFIG_XEN_BLKDEV_FRONTEND configuration option. 487 488 The backend driver attaches itself to a any block device specified 489 in the XenBus configuration. There are no limits to what the block 490 device as long as it has a major and minor. 491 492 If you are compiling a kernel to run in a Xen block backend driver 493 domain (often this is domain 0) you should say Y here. To 494 compile this driver as a module, chose M here: the module 495 will be called xen-blkback. 496 497 498config VIRTIO_BLK 499 tristate "Virtio block driver" 500 depends on VIRTIO 501 ---help--- 502 This is the virtual block driver for virtio. It can be used with 503 lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. 504 505config BLK_DEV_HD 506 bool "Very old hard disk (MFM/RLL/IDE) driver" 507 depends on HAVE_IDE 508 depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN 509 help 510 This is a very old hard disk driver that lacks the enhanced 511 functionality of the newer ones. 512 513 It is required for systems with ancient MFM/RLL/ESDI drives. 514 515 If unsure, say N. 516 517config BLK_DEV_RBD 518 tristate "Rados block device (RBD)" 519 depends on INET && BLOCK 520 select CEPH_LIB 521 select LIBCRC32C 522 select CRYPTO_AES 523 select CRYPTO 524 default n 525 help 526 Say Y here if you want include the Rados block device, which stripes 527 a block device over objects stored in the Ceph distributed object 528 store. 529 530 More information at http://ceph.newdream.net/. 531 532 If unsure, say N. 533 534config BLK_DEV_RSXX 535 tristate "IBM Flash Adapter 900GB Full Height PCIe Device Driver" 536 depends on PCI 537 help 538 Device driver for IBM's high speed PCIe SSD 539 storage device: Flash Adapter 900GB Full Height. 540 541 To compile this driver as a module, choose M here: the 542 module will be called rsxx. 543 544endif # BLK_DEV 545