xref: /linux/drivers/atm/solos-pci.c (revision 856e7c4b619af622d56b3b454f7bec32a170ac99)
1 /*
2  * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
3  *  Traverse Technologies -- http://www.traverse.com.au/
4  *  Xrio Limited          -- http://www.xrio.com/
5  *
6  *
7  * Copyright © 2008 Traverse Technologies
8  * Copyright © 2008 Intel Corporation
9  *
10  * Authors: Nathan Williams <nathan@traverse.com.au>
11  *          David Woodhouse <dwmw2@infradead.org>
12  *          Treker Chen <treker@xrio.com>
13  *
14  * This program is free software; you can redistribute it and/or
15  * modify it under the terms of the GNU General Public License
16  * version 2, as published by the Free Software Foundation.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  */
23 
24 #define DEBUG
25 #define VERBOSE_DEBUG
26 
27 #include <linux/interrupt.h>
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/errno.h>
31 #include <linux/ioport.h>
32 #include <linux/types.h>
33 #include <linux/pci.h>
34 #include <linux/atm.h>
35 #include <linux/atmdev.h>
36 #include <linux/skbuff.h>
37 #include <linux/sysfs.h>
38 #include <linux/device.h>
39 #include <linux/kobject.h>
40 #include <linux/firmware.h>
41 #include <linux/ctype.h>
42 #include <linux/swab.h>
43 #include <linux/slab.h>
44 
45 #define VERSION "1.04"
46 #define DRIVER_VERSION 0x01
47 #define PTAG "solos-pci"
48 
49 #define CONFIG_RAM_SIZE	128
50 #define FLAGS_ADDR	0x7C
51 #define IRQ_EN_ADDR	0x78
52 #define FPGA_VER	0x74
53 #define IRQ_CLEAR	0x70
54 #define WRITE_FLASH	0x6C
55 #define PORTS		0x68
56 #define FLASH_BLOCK	0x64
57 #define FLASH_BUSY	0x60
58 #define FPGA_MODE	0x5C
59 #define FLASH_MODE	0x58
60 #define GPIO_STATUS	0x54
61 #define DRIVER_VER	0x50
62 #define TX_DMA_ADDR(port)	(0x40 + (4 * (port)))
63 #define RX_DMA_ADDR(port)	(0x30 + (4 * (port)))
64 
65 #define DATA_RAM_SIZE	32768
66 #define BUF_SIZE	2048
67 #define OLD_BUF_SIZE	4096 /* For FPGA versions <= 2*/
68 /* Old boards use ATMEL AD45DB161D flash */
69 #define ATMEL_FPGA_PAGE	528 /* FPGA flash page size*/
70 #define ATMEL_SOLOS_PAGE	512 /* Solos flash page size*/
71 #define ATMEL_FPGA_BLOCK	(ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
72 #define ATMEL_SOLOS_BLOCK	(ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
73 /* Current boards use M25P/M25PE SPI flash */
74 #define SPI_FLASH_BLOCK	(256 * 64)
75 
76 #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
77 #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
78 #define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
79 
80 #define RX_DMA_SIZE	2048
81 
82 #define FPGA_VERSION(a,b) (((a) << 8) + (b))
83 #define LEGACY_BUFFERS	2
84 #define DMA_SUPPORTED	4
85 
86 static int reset = 0;
87 static int atmdebug = 0;
88 static int firmware_upgrade = 0;
89 static int fpga_upgrade = 0;
90 static int db_firmware_upgrade = 0;
91 static int db_fpga_upgrade = 0;
92 
93 struct pkt_hdr {
94 	__le16 size;
95 	__le16 vpi;
96 	__le16 vci;
97 	__le16 type;
98 };
99 
100 struct solos_skb_cb {
101 	struct atm_vcc *vcc;
102 	uint32_t dma_addr;
103 };
104 
105 
106 #define SKB_CB(skb)		((struct solos_skb_cb *)skb->cb)
107 
108 #define PKT_DATA	0
109 #define PKT_COMMAND	1
110 #define PKT_POPEN	3
111 #define PKT_PCLOSE	4
112 #define PKT_STATUS	5
113 
114 struct solos_card {
115 	void __iomem *config_regs;
116 	void __iomem *buffers;
117 	int nr_ports;
118 	int tx_mask;
119 	struct pci_dev *dev;
120 	struct atm_dev *atmdev[4];
121 	struct tasklet_struct tlet;
122 	spinlock_t tx_lock;
123 	spinlock_t tx_queue_lock;
124 	spinlock_t cli_queue_lock;
125 	spinlock_t param_queue_lock;
126 	struct list_head param_queue;
127 	struct sk_buff_head tx_queue[4];
128 	struct sk_buff_head cli_queue[4];
129 	struct sk_buff *tx_skb[4];
130 	struct sk_buff *rx_skb[4];
131 	unsigned char *dma_bounce;
132 	wait_queue_head_t param_wq;
133 	wait_queue_head_t fw_wq;
134 	int using_dma;
135 	int dma_alignment;
136 	int fpga_version;
137 	int buffer_size;
138 	int atmel_flash;
139 };
140 
141 
142 struct solos_param {
143 	struct list_head list;
144 	pid_t pid;
145 	int port;
146 	struct sk_buff *response;
147 };
148 
149 #define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
150 
151 MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
152 MODULE_DESCRIPTION("Solos PCI driver");
153 MODULE_VERSION(VERSION);
154 MODULE_LICENSE("GPL");
155 MODULE_FIRMWARE("solos-FPGA.bin");
156 MODULE_FIRMWARE("solos-Firmware.bin");
157 MODULE_FIRMWARE("solos-db-FPGA.bin");
158 MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
159 MODULE_PARM_DESC(atmdebug, "Print ATM data");
160 MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
161 MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
162 MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
163 MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
164 module_param(reset, int, 0444);
165 module_param(atmdebug, int, 0644);
166 module_param(firmware_upgrade, int, 0444);
167 module_param(fpga_upgrade, int, 0444);
168 module_param(db_firmware_upgrade, int, 0444);
169 module_param(db_fpga_upgrade, int, 0444);
170 
171 static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
172 		       struct atm_vcc *vcc);
173 static uint32_t fpga_tx(struct solos_card *);
174 static irqreturn_t solos_irq(int irq, void *dev_id);
175 static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
176 static int atm_init(struct solos_card *, struct device *);
177 static void atm_remove(struct solos_card *);
178 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
179 static void solos_bh(unsigned long);
180 static int print_buffer(struct sk_buff *buf);
181 
182 static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
183 {
184         if (vcc->pop)
185                 vcc->pop(vcc, skb);
186         else
187                 dev_kfree_skb_any(skb);
188 }
189 
190 static ssize_t solos_param_show(struct device *dev, struct device_attribute *attr,
191 				char *buf)
192 {
193 	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
194 	struct solos_card *card = atmdev->dev_data;
195 	struct solos_param prm;
196 	struct sk_buff *skb;
197 	struct pkt_hdr *header;
198 	int buflen;
199 
200 	buflen = strlen(attr->attr.name) + 10;
201 
202 	skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
203 	if (!skb) {
204 		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_show()\n");
205 		return -ENOMEM;
206 	}
207 
208 	header = skb_put(skb, sizeof(*header));
209 
210 	buflen = snprintf((void *)&header[1], buflen - 1,
211 			  "L%05d\n%s\n", current->pid, attr->attr.name);
212 	skb_put(skb, buflen);
213 
214 	header->size = cpu_to_le16(buflen);
215 	header->vpi = cpu_to_le16(0);
216 	header->vci = cpu_to_le16(0);
217 	header->type = cpu_to_le16(PKT_COMMAND);
218 
219 	prm.pid = current->pid;
220 	prm.response = NULL;
221 	prm.port = SOLOS_CHAN(atmdev);
222 
223 	spin_lock_irq(&card->param_queue_lock);
224 	list_add(&prm.list, &card->param_queue);
225 	spin_unlock_irq(&card->param_queue_lock);
226 
227 	fpga_queue(card, prm.port, skb, NULL);
228 
229 	wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
230 
231 	spin_lock_irq(&card->param_queue_lock);
232 	list_del(&prm.list);
233 	spin_unlock_irq(&card->param_queue_lock);
234 
235 	if (!prm.response)
236 		return -EIO;
237 
238 	buflen = prm.response->len;
239 	memcpy(buf, prm.response->data, buflen);
240 	kfree_skb(prm.response);
241 
242 	return buflen;
243 }
244 
245 static ssize_t solos_param_store(struct device *dev, struct device_attribute *attr,
246 				 const char *buf, size_t count)
247 {
248 	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
249 	struct solos_card *card = atmdev->dev_data;
250 	struct solos_param prm;
251 	struct sk_buff *skb;
252 	struct pkt_hdr *header;
253 	int buflen;
254 	ssize_t ret;
255 
256 	buflen = strlen(attr->attr.name) + 11 + count;
257 
258 	skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
259 	if (!skb) {
260 		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_store()\n");
261 		return -ENOMEM;
262 	}
263 
264 	header = skb_put(skb, sizeof(*header));
265 
266 	buflen = snprintf((void *)&header[1], buflen - 1,
267 			  "L%05d\n%s\n%s\n", current->pid, attr->attr.name, buf);
268 
269 	skb_put(skb, buflen);
270 	header->size = cpu_to_le16(buflen);
271 	header->vpi = cpu_to_le16(0);
272 	header->vci = cpu_to_le16(0);
273 	header->type = cpu_to_le16(PKT_COMMAND);
274 
275 	prm.pid = current->pid;
276 	prm.response = NULL;
277 	prm.port = SOLOS_CHAN(atmdev);
278 
279 	spin_lock_irq(&card->param_queue_lock);
280 	list_add(&prm.list, &card->param_queue);
281 	spin_unlock_irq(&card->param_queue_lock);
282 
283 	fpga_queue(card, prm.port, skb, NULL);
284 
285 	wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
286 
287 	spin_lock_irq(&card->param_queue_lock);
288 	list_del(&prm.list);
289 	spin_unlock_irq(&card->param_queue_lock);
290 
291 	skb = prm.response;
292 
293 	if (!skb)
294 		return -EIO;
295 
296 	buflen = skb->len;
297 
298 	/* Sometimes it has a newline, sometimes it doesn't. */
299 	if (skb->data[buflen - 1] == '\n')
300 		buflen--;
301 
302 	if (buflen == 2 && !strncmp(skb->data, "OK", 2))
303 		ret = count;
304 	else if (buflen == 5 && !strncmp(skb->data, "ERROR", 5))
305 		ret = -EIO;
306 	else {
307 		/* We know we have enough space allocated for this; we allocated
308 		   it ourselves */
309 		skb->data[buflen] = 0;
310 
311 		dev_warn(&card->dev->dev, "Unexpected parameter response: '%s'\n",
312 			 skb->data);
313 		ret = -EIO;
314 	}
315 	kfree_skb(skb);
316 
317 	return ret;
318 }
319 
320 static char *next_string(struct sk_buff *skb)
321 {
322 	int i = 0;
323 	char *this = skb->data;
324 
325 	for (i = 0; i < skb->len; i++) {
326 		if (this[i] == '\n') {
327 			this[i] = 0;
328 			skb_pull(skb, i + 1);
329 			return this;
330 		}
331 		if (!isprint(this[i]))
332 			return NULL;
333 	}
334 	return NULL;
335 }
336 
337 /*
338  * Status packet has fields separated by \n, starting with a version number
339  * for the information therein. Fields are....
340  *
341  *     packet version
342  *     RxBitRate	(version >= 1)
343  *     TxBitRate	(version >= 1)
344  *     State		(version >= 1)
345  *     LocalSNRMargin	(version >= 1)
346  *     LocalLineAttn	(version >= 1)
347  */
348 static int process_status(struct solos_card *card, int port, struct sk_buff *skb)
349 {
350 	char *str, *state_str, *snr, *attn;
351 	int ver, rate_up, rate_down, err;
352 
353 	if (!card->atmdev[port])
354 		return -ENODEV;
355 
356 	str = next_string(skb);
357 	if (!str)
358 		return -EIO;
359 
360 	err = kstrtoint(str, 10, &ver);
361 	if (err) {
362 		dev_warn(&card->dev->dev, "Unexpected status interrupt version\n");
363 		return err;
364 	}
365 	if (ver < 1) {
366 		dev_warn(&card->dev->dev, "Unexpected status interrupt version %d\n",
367 			 ver);
368 		return -EIO;
369 	}
370 
371 	str = next_string(skb);
372 	if (!str)
373 		return -EIO;
374 	if (!strcmp(str, "ERROR")) {
375 		dev_dbg(&card->dev->dev, "Status packet indicated Solos error on port %d (starting up?)\n",
376 			 port);
377 		return 0;
378 	}
379 
380 	err = kstrtoint(str, 10, &rate_down);
381 	if (err)
382 		return err;
383 
384 	str = next_string(skb);
385 	if (!str)
386 		return -EIO;
387 	err = kstrtoint(str, 10, &rate_up);
388 	if (err)
389 		return err;
390 
391 	state_str = next_string(skb);
392 	if (!state_str)
393 		return -EIO;
394 
395 	/* Anything but 'Showtime' is down */
396 	if (strcmp(state_str, "Showtime")) {
397 		atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
398 		dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
399 		return 0;
400 	}
401 
402 	snr = next_string(skb);
403 	if (!snr)
404 		return -EIO;
405 	attn = next_string(skb);
406 	if (!attn)
407 		return -EIO;
408 
409 	dev_info(&card->dev->dev, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
410 		 port, state_str, rate_down/1000, rate_up/1000,
411 		 snr[0]?", SNR ":"", snr, attn[0]?", Attn ":"", attn);
412 
413 	card->atmdev[port]->link_rate = rate_down / 424;
414 	atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_FOUND);
415 
416 	return 0;
417 }
418 
419 static int process_command(struct solos_card *card, int port, struct sk_buff *skb)
420 {
421 	struct solos_param *prm;
422 	unsigned long flags;
423 	int cmdpid;
424 	int found = 0, err;
425 
426 	if (skb->len < 7)
427 		return 0;
428 
429 	if (skb->data[0] != 'L'    || !isdigit(skb->data[1]) ||
430 	    !isdigit(skb->data[2]) || !isdigit(skb->data[3]) ||
431 	    !isdigit(skb->data[4]) || !isdigit(skb->data[5]) ||
432 	    skb->data[6] != '\n')
433 		return 0;
434 
435 	err = kstrtoint(&skb->data[1], 10, &cmdpid);
436 	if (err)
437 		return err;
438 
439 	spin_lock_irqsave(&card->param_queue_lock, flags);
440 	list_for_each_entry(prm, &card->param_queue, list) {
441 		if (prm->port == port && prm->pid == cmdpid) {
442 			prm->response = skb;
443 			skb_pull(skb, 7);
444 			wake_up(&card->param_wq);
445 			found = 1;
446 			break;
447 		}
448 	}
449 	spin_unlock_irqrestore(&card->param_queue_lock, flags);
450 	return found;
451 }
452 
453 static ssize_t console_show(struct device *dev, struct device_attribute *attr,
454 			    char *buf)
455 {
456 	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
457 	struct solos_card *card = atmdev->dev_data;
458 	struct sk_buff *skb;
459 	unsigned int len;
460 
461 	spin_lock(&card->cli_queue_lock);
462 	skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
463 	spin_unlock(&card->cli_queue_lock);
464 	if(skb == NULL)
465 		return sprintf(buf, "No data.\n");
466 
467 	len = skb->len;
468 	memcpy(buf, skb->data, len);
469 
470 	kfree_skb(skb);
471 	return len;
472 }
473 
474 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
475 {
476 	struct sk_buff *skb;
477 	struct pkt_hdr *header;
478 
479 	if (size > (BUF_SIZE - sizeof(*header))) {
480 		dev_dbg(&card->dev->dev, "Command is too big.  Dropping request\n");
481 		return 0;
482 	}
483 	skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
484 	if (!skb) {
485 		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
486 		return 0;
487 	}
488 
489 	header = skb_put(skb, sizeof(*header));
490 
491 	header->size = cpu_to_le16(size);
492 	header->vpi = cpu_to_le16(0);
493 	header->vci = cpu_to_le16(0);
494 	header->type = cpu_to_le16(PKT_COMMAND);
495 
496 	skb_put_data(skb, buf, size);
497 
498 	fpga_queue(card, dev, skb, NULL);
499 
500 	return 0;
501 }
502 
503 static ssize_t console_store(struct device *dev, struct device_attribute *attr,
504 			     const char *buf, size_t count)
505 {
506 	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
507 	struct solos_card *card = atmdev->dev_data;
508 	int err;
509 
510 	err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
511 
512 	return err?:count;
513 }
514 
515 struct geos_gpio_attr {
516 	struct device_attribute attr;
517 	int offset;
518 };
519 
520 #define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset)	\
521 	struct geos_gpio_attr gpio_attr_##_name = {		\
522 		.attr = __ATTR(_name, _mode, _show, _store),	\
523 		.offset = _offset }
524 
525 static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
526 			       const char *buf, size_t count)
527 {
528 	struct pci_dev *pdev = to_pci_dev(dev);
529 	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
530 	struct solos_card *card = pci_get_drvdata(pdev);
531 	uint32_t data32;
532 
533 	if (count != 1 && (count != 2 || buf[1] != '\n'))
534 		return -EINVAL;
535 
536 	spin_lock_irq(&card->param_queue_lock);
537 	data32 = ioread32(card->config_regs + GPIO_STATUS);
538 	if (buf[0] == '1') {
539 		data32 |= 1 << gattr->offset;
540 		iowrite32(data32, card->config_regs + GPIO_STATUS);
541 	} else if (buf[0] == '0') {
542 		data32 &= ~(1 << gattr->offset);
543 		iowrite32(data32, card->config_regs + GPIO_STATUS);
544 	} else {
545 		count = -EINVAL;
546 	}
547 	spin_unlock_irq(&card->param_queue_lock);
548 	return count;
549 }
550 
551 static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
552 			      char *buf)
553 {
554 	struct pci_dev *pdev = to_pci_dev(dev);
555 	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
556 	struct solos_card *card = pci_get_drvdata(pdev);
557 	uint32_t data32;
558 
559 	data32 = ioread32(card->config_regs + GPIO_STATUS);
560 	data32 = (data32 >> gattr->offset) & 1;
561 
562 	return sprintf(buf, "%d\n", data32);
563 }
564 
565 static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
566 			     char *buf)
567 {
568 	struct pci_dev *pdev = to_pci_dev(dev);
569 	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
570 	struct solos_card *card = pci_get_drvdata(pdev);
571 	uint32_t data32;
572 
573 	data32 = ioread32(card->config_regs + GPIO_STATUS);
574 	switch (gattr->offset) {
575 	case 0:
576 		/* HardwareVersion */
577 		data32 = data32 & 0x1F;
578 		break;
579 	case 1:
580 		/* HardwareVariant */
581 		data32 = (data32 >> 5) & 0x0F;
582 		break;
583 	}
584 	return sprintf(buf, "%d\n", data32);
585 }
586 
587 static DEVICE_ATTR_RW(console);
588 
589 
590 #define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
591 #define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
592 
593 #include "solos-attrlist.c"
594 
595 static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
596 static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
597 static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
598 static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
599 static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
600 static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
601 static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
602 static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
603 #undef SOLOS_ATTR_RO
604 #undef SOLOS_ATTR_RW
605 
606 #define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
607 #define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
608 
609 static struct attribute *solos_attrs[] = {
610 #include "solos-attrlist.c"
611 	NULL
612 };
613 
614 static const struct attribute_group solos_attr_group = {
615 	.attrs = solos_attrs,
616 	.name = "parameters",
617 };
618 
619 static struct attribute *gpio_attrs[] = {
620 	&gpio_attr_GPIO1.attr.attr,
621 	&gpio_attr_GPIO2.attr.attr,
622 	&gpio_attr_GPIO3.attr.attr,
623 	&gpio_attr_GPIO4.attr.attr,
624 	&gpio_attr_GPIO5.attr.attr,
625 	&gpio_attr_PushButton.attr.attr,
626 	&gpio_attr_HardwareVersion.attr.attr,
627 	&gpio_attr_HardwareVariant.attr.attr,
628 	NULL
629 };
630 
631 static const struct attribute_group gpio_attr_group = {
632 	.attrs = gpio_attrs,
633 	.name = "gpio",
634 };
635 
636 static int flash_upgrade(struct solos_card *card, int chip)
637 {
638 	const struct firmware *fw;
639 	const char *fw_name;
640 	int blocksize = 0;
641 	int numblocks = 0;
642 	int offset;
643 
644 	switch (chip) {
645 	case 0:
646 		fw_name = "solos-FPGA.bin";
647 		if (card->atmel_flash)
648 			blocksize = ATMEL_FPGA_BLOCK;
649 		else
650 			blocksize = SPI_FLASH_BLOCK;
651 		break;
652 	case 1:
653 		fw_name = "solos-Firmware.bin";
654 		if (card->atmel_flash)
655 			blocksize = ATMEL_SOLOS_BLOCK;
656 		else
657 			blocksize = SPI_FLASH_BLOCK;
658 		break;
659 	case 2:
660 		if (card->fpga_version > LEGACY_BUFFERS){
661 			fw_name = "solos-db-FPGA.bin";
662 			if (card->atmel_flash)
663 				blocksize = ATMEL_FPGA_BLOCK;
664 			else
665 				blocksize = SPI_FLASH_BLOCK;
666 		} else {
667 			dev_info(&card->dev->dev, "FPGA version doesn't support"
668 					" daughter board upgrades\n");
669 			return -EPERM;
670 		}
671 		break;
672 	case 3:
673 		if (card->fpga_version > LEGACY_BUFFERS){
674 			fw_name = "solos-Firmware.bin";
675 			if (card->atmel_flash)
676 				blocksize = ATMEL_SOLOS_BLOCK;
677 			else
678 				blocksize = SPI_FLASH_BLOCK;
679 		} else {
680 			dev_info(&card->dev->dev, "FPGA version doesn't support"
681 					" daughter board upgrades\n");
682 			return -EPERM;
683 		}
684 		break;
685 	default:
686 		return -ENODEV;
687 	}
688 
689 	if (request_firmware(&fw, fw_name, &card->dev->dev))
690 		return -ENOENT;
691 
692 	dev_info(&card->dev->dev, "Flash upgrade starting\n");
693 
694 	/* New FPGAs require driver version before permitting flash upgrades */
695 	iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
696 
697 	numblocks = fw->size / blocksize;
698 	dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
699 	dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
700 
701 	dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
702 	iowrite32(1, card->config_regs + FPGA_MODE);
703 	(void) ioread32(card->config_regs + FPGA_MODE);
704 
705 	/* Set mode to Chip Erase */
706 	if(chip == 0 || chip == 2)
707 		dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
708 	if(chip == 1 || chip == 3)
709 		dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
710 	iowrite32((chip * 2), card->config_regs + FLASH_MODE);
711 
712 
713 	iowrite32(1, card->config_regs + WRITE_FLASH);
714 	wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
715 
716 	for (offset = 0; offset < fw->size; offset += blocksize) {
717 		int i;
718 
719 		/* Clear write flag */
720 		iowrite32(0, card->config_regs + WRITE_FLASH);
721 
722 		/* Set mode to Block Write */
723 		/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
724 		iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
725 
726 		/* Copy block to buffer, swapping each 16 bits for Atmel flash */
727 		for(i = 0; i < blocksize; i += 4) {
728 			uint32_t word;
729 			if (card->atmel_flash)
730 				word = swahb32p((uint32_t *)(fw->data + offset + i));
731 			else
732 				word = *(uint32_t *)(fw->data + offset + i);
733 			if(card->fpga_version > LEGACY_BUFFERS)
734 				iowrite32(word, FLASH_BUF + i);
735 			else
736 				iowrite32(word, RX_BUF(card, 3) + i);
737 		}
738 
739 		/* Specify block number and then trigger flash write */
740 		iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
741 		iowrite32(1, card->config_regs + WRITE_FLASH);
742 		wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
743 	}
744 
745 	release_firmware(fw);
746 	iowrite32(0, card->config_regs + WRITE_FLASH);
747 	iowrite32(0, card->config_regs + FPGA_MODE);
748 	iowrite32(0, card->config_regs + FLASH_MODE);
749 	dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
750 	return 0;
751 }
752 
753 static irqreturn_t solos_irq(int irq, void *dev_id)
754 {
755 	struct solos_card *card = dev_id;
756 	int handled = 1;
757 
758 	iowrite32(0, card->config_regs + IRQ_CLEAR);
759 
760 	/* If we're up and running, just kick the tasklet to process TX/RX */
761 	if (card->atmdev[0])
762 		tasklet_schedule(&card->tlet);
763 	else
764 		wake_up(&card->fw_wq);
765 
766 	return IRQ_RETVAL(handled);
767 }
768 
769 static void solos_bh(unsigned long card_arg)
770 {
771 	struct solos_card *card = (void *)card_arg;
772 	uint32_t card_flags;
773 	uint32_t rx_done = 0;
774 	int port;
775 
776 	/*
777 	 * Since fpga_tx() is going to need to read the flags under its lock,
778 	 * it can return them to us so that we don't have to hit PCI MMIO
779 	 * again for the same information
780 	 */
781 	card_flags = fpga_tx(card);
782 
783 	for (port = 0; port < card->nr_ports; port++) {
784 		if (card_flags & (0x10 << port)) {
785 			struct pkt_hdr _hdr, *header;
786 			struct sk_buff *skb;
787 			struct atm_vcc *vcc;
788 			int size;
789 
790 			if (card->using_dma) {
791 				skb = card->rx_skb[port];
792 				card->rx_skb[port] = NULL;
793 
794 				dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
795 						 RX_DMA_SIZE, DMA_FROM_DEVICE);
796 
797 				header = (void *)skb->data;
798 				size = le16_to_cpu(header->size);
799 				skb_put(skb, size + sizeof(*header));
800 				skb_pull(skb, sizeof(*header));
801 			} else {
802 				header = &_hdr;
803 
804 				rx_done |= 0x10 << port;
805 
806 				memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
807 
808 				size = le16_to_cpu(header->size);
809 				if (size > (card->buffer_size - sizeof(*header))){
810 					dev_warn(&card->dev->dev, "Invalid buffer size\n");
811 					continue;
812 				}
813 
814 				/* Use netdev_alloc_skb() because it adds NET_SKB_PAD of
815 				 * headroom, and ensures we can route packets back out an
816 				 * Ethernet interface (for example) without having to
817 				 * reallocate. Adding NET_IP_ALIGN also ensures that both
818 				 * PPPoATM and PPPoEoBR2684 packets end up aligned. */
819 				skb = netdev_alloc_skb_ip_align(NULL, size + 1);
820 				if (!skb) {
821 					if (net_ratelimit())
822 						dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
823 					continue;
824 				}
825 
826 				memcpy_fromio(skb_put(skb, size),
827 					      RX_BUF(card, port) + sizeof(*header),
828 					      size);
829 			}
830 			if (atmdebug) {
831 				dev_info(&card->dev->dev, "Received: port %d\n", port);
832 				dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
833 					 size, le16_to_cpu(header->vpi),
834 					 le16_to_cpu(header->vci));
835 				print_buffer(skb);
836 			}
837 
838 			switch (le16_to_cpu(header->type)) {
839 			case PKT_DATA:
840 				vcc = find_vcc(card->atmdev[port], le16_to_cpu(header->vpi),
841 					       le16_to_cpu(header->vci));
842 				if (!vcc) {
843 					if (net_ratelimit())
844 						dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
845 							 le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
846 							 port);
847 					dev_kfree_skb_any(skb);
848 					break;
849 				}
850 				atm_charge(vcc, skb->truesize);
851 				vcc->push(vcc, skb);
852 				atomic_inc(&vcc->stats->rx);
853 				break;
854 
855 			case PKT_STATUS:
856 				if (process_status(card, port, skb) &&
857 				    net_ratelimit()) {
858 					dev_warn(&card->dev->dev, "Bad status packet of %d bytes on port %d:\n", skb->len, port);
859 					print_buffer(skb);
860 				}
861 				dev_kfree_skb_any(skb);
862 				break;
863 
864 			case PKT_COMMAND:
865 			default: /* FIXME: Not really, surely? */
866 				if (process_command(card, port, skb))
867 					break;
868 				spin_lock(&card->cli_queue_lock);
869 				if (skb_queue_len(&card->cli_queue[port]) > 10) {
870 					if (net_ratelimit())
871 						dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
872 							 port);
873 					dev_kfree_skb_any(skb);
874 				} else
875 					skb_queue_tail(&card->cli_queue[port], skb);
876 				spin_unlock(&card->cli_queue_lock);
877 				break;
878 			}
879 		}
880 		/* Allocate RX skbs for any ports which need them */
881 		if (card->using_dma && card->atmdev[port] &&
882 		    !card->rx_skb[port]) {
883 			/* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN
884 			 * here; the FPGA can only DMA to addresses which are
885 			 * aligned to 4 bytes. */
886 			struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE);
887 			if (skb) {
888 				SKB_CB(skb)->dma_addr =
889 					dma_map_single(&card->dev->dev, skb->data,
890 						       RX_DMA_SIZE, DMA_FROM_DEVICE);
891 				iowrite32(SKB_CB(skb)->dma_addr,
892 					  card->config_regs + RX_DMA_ADDR(port));
893 				card->rx_skb[port] = skb;
894 			} else {
895 				if (net_ratelimit())
896 					dev_warn(&card->dev->dev, "Failed to allocate RX skb");
897 
898 				/* We'll have to try again later */
899 				tasklet_schedule(&card->tlet);
900 			}
901 		}
902 	}
903 	if (rx_done)
904 		iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
905 
906 	return;
907 }
908 
909 static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
910 {
911 	struct hlist_head *head;
912 	struct atm_vcc *vcc = NULL;
913 	struct sock *s;
914 
915 	read_lock(&vcc_sklist_lock);
916 	head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
917 	sk_for_each(s, head) {
918 		vcc = atm_sk(s);
919 		if (vcc->dev == dev && vcc->vci == vci &&
920 		    vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
921 		    test_bit(ATM_VF_READY, &vcc->flags))
922 			goto out;
923 	}
924 	vcc = NULL;
925  out:
926 	read_unlock(&vcc_sklist_lock);
927 	return vcc;
928 }
929 
930 static int popen(struct atm_vcc *vcc)
931 {
932 	struct solos_card *card = vcc->dev->dev_data;
933 	struct sk_buff *skb;
934 	struct pkt_hdr *header;
935 
936 	if (vcc->qos.aal != ATM_AAL5) {
937 		dev_warn(&card->dev->dev, "Unsupported ATM type %d\n",
938 			 vcc->qos.aal);
939 		return -EINVAL;
940 	}
941 
942 	skb = alloc_skb(sizeof(*header), GFP_KERNEL);
943 	if (!skb) {
944 		if (net_ratelimit())
945 			dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
946 		return -ENOMEM;
947 	}
948 	header = skb_put(skb, sizeof(*header));
949 
950 	header->size = cpu_to_le16(0);
951 	header->vpi = cpu_to_le16(vcc->vpi);
952 	header->vci = cpu_to_le16(vcc->vci);
953 	header->type = cpu_to_le16(PKT_POPEN);
954 
955 	fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
956 
957 	set_bit(ATM_VF_ADDR, &vcc->flags);
958 	set_bit(ATM_VF_READY, &vcc->flags);
959 
960 	return 0;
961 }
962 
963 static void pclose(struct atm_vcc *vcc)
964 {
965 	struct solos_card *card = vcc->dev->dev_data;
966 	unsigned char port = SOLOS_CHAN(vcc->dev);
967 	struct sk_buff *skb, *tmpskb;
968 	struct pkt_hdr *header;
969 
970 	/* Remove any yet-to-be-transmitted packets from the pending queue */
971 	spin_lock(&card->tx_queue_lock);
972 	skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) {
973 		if (SKB_CB(skb)->vcc == vcc) {
974 			skb_unlink(skb, &card->tx_queue[port]);
975 			solos_pop(vcc, skb);
976 		}
977 	}
978 	spin_unlock(&card->tx_queue_lock);
979 
980 	skb = alloc_skb(sizeof(*header), GFP_KERNEL);
981 	if (!skb) {
982 		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
983 		return;
984 	}
985 	header = skb_put(skb, sizeof(*header));
986 
987 	header->size = cpu_to_le16(0);
988 	header->vpi = cpu_to_le16(vcc->vpi);
989 	header->vci = cpu_to_le16(vcc->vci);
990 	header->type = cpu_to_le16(PKT_PCLOSE);
991 
992 	skb_get(skb);
993 	fpga_queue(card, port, skb, NULL);
994 
995 	if (!wait_event_timeout(card->param_wq, !skb_shared(skb), 5 * HZ))
996 		dev_warn(&card->dev->dev,
997 			 "Timeout waiting for VCC close on port %d\n", port);
998 
999 	dev_kfree_skb(skb);
1000 
1001 	/* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
1002 	   tasklet has finished processing any incoming packets (and, more to
1003 	   the point, using the vcc pointer). */
1004 	tasklet_unlock_wait(&card->tlet);
1005 
1006 	clear_bit(ATM_VF_ADDR, &vcc->flags);
1007 
1008 	return;
1009 }
1010 
1011 static int print_buffer(struct sk_buff *buf)
1012 {
1013 	int len,i;
1014 	char msg[500];
1015 	char item[10];
1016 
1017 	len = buf->len;
1018 	for (i = 0; i < len; i++){
1019 		if(i % 8 == 0)
1020 			sprintf(msg, "%02X: ", i);
1021 
1022 		sprintf(item,"%02X ",*(buf->data + i));
1023 		strcat(msg, item);
1024 		if(i % 8 == 7) {
1025 			sprintf(item, "\n");
1026 			strcat(msg, item);
1027 			printk(KERN_DEBUG "%s", msg);
1028 		}
1029 	}
1030 	if (i % 8 != 0) {
1031 		sprintf(item, "\n");
1032 		strcat(msg, item);
1033 		printk(KERN_DEBUG "%s", msg);
1034 	}
1035 	printk(KERN_DEBUG "\n");
1036 
1037 	return 0;
1038 }
1039 
1040 static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
1041 		       struct atm_vcc *vcc)
1042 {
1043 	int old_len;
1044 	unsigned long flags;
1045 
1046 	SKB_CB(skb)->vcc = vcc;
1047 
1048 	spin_lock_irqsave(&card->tx_queue_lock, flags);
1049 	old_len = skb_queue_len(&card->tx_queue[port]);
1050 	skb_queue_tail(&card->tx_queue[port], skb);
1051 	if (!old_len)
1052 		card->tx_mask |= (1 << port);
1053 	spin_unlock_irqrestore(&card->tx_queue_lock, flags);
1054 
1055 	/* Theoretically we could just schedule the tasklet here, but
1056 	   that introduces latency we don't want -- it's noticeable */
1057 	if (!old_len)
1058 		fpga_tx(card);
1059 }
1060 
1061 static uint32_t fpga_tx(struct solos_card *card)
1062 {
1063 	uint32_t tx_pending, card_flags;
1064 	uint32_t tx_started = 0;
1065 	struct sk_buff *skb;
1066 	struct atm_vcc *vcc;
1067 	unsigned char port;
1068 	unsigned long flags;
1069 
1070 	spin_lock_irqsave(&card->tx_lock, flags);
1071 
1072 	card_flags = ioread32(card->config_regs + FLAGS_ADDR);
1073 	/*
1074 	 * The queue lock is required for _writing_ to tx_mask, but we're
1075 	 * OK to read it here without locking. The only potential update
1076 	 * that we could race with is in fpga_queue() where it sets a bit
1077 	 * for a new port... but it's going to call this function again if
1078 	 * it's doing that, anyway.
1079 	 */
1080 	tx_pending = card->tx_mask & ~card_flags;
1081 
1082 	for (port = 0; tx_pending; tx_pending >>= 1, port++) {
1083 		if (tx_pending & 1) {
1084 			struct sk_buff *oldskb = card->tx_skb[port];
1085 			if (oldskb) {
1086 				dma_unmap_single(&card->dev->dev, SKB_CB(oldskb)->dma_addr,
1087 						 oldskb->len, DMA_TO_DEVICE);
1088 				card->tx_skb[port] = NULL;
1089 			}
1090 			spin_lock(&card->tx_queue_lock);
1091 			skb = skb_dequeue(&card->tx_queue[port]);
1092 			if (!skb)
1093 				card->tx_mask &= ~(1 << port);
1094 			spin_unlock(&card->tx_queue_lock);
1095 
1096 			if (skb && !card->using_dma) {
1097 				memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
1098 				tx_started |= 1 << port;
1099 				oldskb = skb; /* We're done with this skb already */
1100 			} else if (skb && card->using_dma) {
1101 				unsigned char *data = skb->data;
1102 				if ((unsigned long)data & card->dma_alignment) {
1103 					data = card->dma_bounce + (BUF_SIZE * port);
1104 					memcpy(data, skb->data, skb->len);
1105 				}
1106 				SKB_CB(skb)->dma_addr = dma_map_single(&card->dev->dev, data,
1107 								       skb->len, DMA_TO_DEVICE);
1108 				card->tx_skb[port] = skb;
1109 				iowrite32(SKB_CB(skb)->dma_addr,
1110 					  card->config_regs + TX_DMA_ADDR(port));
1111 			}
1112 
1113 			if (!oldskb)
1114 				continue;
1115 
1116 			/* Clean up and free oldskb now it's gone */
1117 			if (atmdebug) {
1118 				struct pkt_hdr *header = (void *)oldskb->data;
1119 				int size = le16_to_cpu(header->size);
1120 
1121 				skb_pull(oldskb, sizeof(*header));
1122 				dev_info(&card->dev->dev, "Transmitted: port %d\n",
1123 					 port);
1124 				dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
1125 					 size, le16_to_cpu(header->vpi),
1126 					 le16_to_cpu(header->vci));
1127 				print_buffer(oldskb);
1128 			}
1129 
1130 			vcc = SKB_CB(oldskb)->vcc;
1131 
1132 			if (vcc) {
1133 				atomic_inc(&vcc->stats->tx);
1134 				solos_pop(vcc, oldskb);
1135 			} else {
1136 				dev_kfree_skb_irq(oldskb);
1137 				wake_up(&card->param_wq);
1138 			}
1139 		}
1140 	}
1141 	/* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
1142 	if (tx_started)
1143 		iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
1144 
1145 	spin_unlock_irqrestore(&card->tx_lock, flags);
1146 	return card_flags;
1147 }
1148 
1149 static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
1150 {
1151 	struct solos_card *card = vcc->dev->dev_data;
1152 	struct pkt_hdr *header;
1153 	int pktlen;
1154 
1155 	pktlen = skb->len;
1156 	if (pktlen > (BUF_SIZE - sizeof(*header))) {
1157 		dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
1158 		solos_pop(vcc, skb);
1159 		return 0;
1160 	}
1161 
1162 	if (!skb_clone_writable(skb, sizeof(*header))) {
1163 		int expand_by = 0;
1164 		int ret;
1165 
1166 		if (skb_headroom(skb) < sizeof(*header))
1167 			expand_by = sizeof(*header) - skb_headroom(skb);
1168 
1169 		ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
1170 		if (ret) {
1171 			dev_warn(&card->dev->dev, "pskb_expand_head failed.\n");
1172 			solos_pop(vcc, skb);
1173 			return ret;
1174 		}
1175 	}
1176 
1177 	header = skb_push(skb, sizeof(*header));
1178 
1179 	/* This does _not_ include the size of the header */
1180 	header->size = cpu_to_le16(pktlen);
1181 	header->vpi = cpu_to_le16(vcc->vpi);
1182 	header->vci = cpu_to_le16(vcc->vci);
1183 	header->type = cpu_to_le16(PKT_DATA);
1184 
1185 	fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
1186 
1187 	return 0;
1188 }
1189 
1190 static const struct atmdev_ops fpga_ops = {
1191 	.open =		popen,
1192 	.close =	pclose,
1193 	.ioctl =	NULL,
1194 	.getsockopt =	NULL,
1195 	.setsockopt =	NULL,
1196 	.send =		psend,
1197 	.send_oam =	NULL,
1198 	.phy_put =	NULL,
1199 	.phy_get =	NULL,
1200 	.change_qos =	NULL,
1201 	.proc_read =	NULL,
1202 	.owner =	THIS_MODULE
1203 };
1204 
1205 static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
1206 {
1207 	int err;
1208 	uint16_t fpga_ver;
1209 	uint8_t major_ver, minor_ver;
1210 	uint32_t data32;
1211 	struct solos_card *card;
1212 
1213 	card = kzalloc(sizeof(*card), GFP_KERNEL);
1214 	if (!card)
1215 		return -ENOMEM;
1216 
1217 	card->dev = dev;
1218 	init_waitqueue_head(&card->fw_wq);
1219 	init_waitqueue_head(&card->param_wq);
1220 
1221 	err = pci_enable_device(dev);
1222 	if (err) {
1223 		dev_warn(&dev->dev,  "Failed to enable PCI device\n");
1224 		goto out;
1225 	}
1226 
1227 	err = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
1228 	if (err) {
1229 		dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
1230 		goto out;
1231 	}
1232 
1233 	err = pci_request_regions(dev, "solos");
1234 	if (err) {
1235 		dev_warn(&dev->dev, "Failed to request regions\n");
1236 		goto out;
1237 	}
1238 
1239 	card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
1240 	if (!card->config_regs) {
1241 		dev_warn(&dev->dev, "Failed to ioremap config registers\n");
1242 		err = -ENOMEM;
1243 		goto out_release_regions;
1244 	}
1245 	card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
1246 	if (!card->buffers) {
1247 		dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
1248 		err = -ENOMEM;
1249 		goto out_unmap_config;
1250 	}
1251 
1252 	if (reset) {
1253 		iowrite32(1, card->config_regs + FPGA_MODE);
1254 		ioread32(card->config_regs + FPGA_MODE);
1255 
1256 		iowrite32(0, card->config_regs + FPGA_MODE);
1257 		ioread32(card->config_regs + FPGA_MODE);
1258 	}
1259 
1260 	data32 = ioread32(card->config_regs + FPGA_VER);
1261 	fpga_ver = (data32 & 0x0000FFFF);
1262 	major_ver = ((data32 & 0xFF000000) >> 24);
1263 	minor_ver = ((data32 & 0x00FF0000) >> 16);
1264 	card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
1265 	if (card->fpga_version > LEGACY_BUFFERS)
1266 		card->buffer_size = BUF_SIZE;
1267 	else
1268 		card->buffer_size = OLD_BUF_SIZE;
1269 	dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
1270 		 major_ver, minor_ver, fpga_ver);
1271 
1272 	if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
1273 			      db_fpga_upgrade || db_firmware_upgrade)) {
1274 		dev_warn(&dev->dev,
1275 			 "FPGA too old; cannot upgrade flash. Use JTAG.\n");
1276 		fpga_upgrade = firmware_upgrade = 0;
1277 		db_fpga_upgrade = db_firmware_upgrade = 0;
1278 	}
1279 
1280 	/* Stopped using Atmel flash after 0.03-38 */
1281 	if (fpga_ver < 39)
1282 		card->atmel_flash = 1;
1283 	else
1284 		card->atmel_flash = 0;
1285 
1286 	data32 = ioread32(card->config_regs + PORTS);
1287 	card->nr_ports = (data32 & 0x000000FF);
1288 
1289 	if (card->fpga_version >= DMA_SUPPORTED) {
1290 		pci_set_master(dev);
1291 		card->using_dma = 1;
1292 		if (1) { /* All known FPGA versions so far */
1293 			card->dma_alignment = 3;
1294 			card->dma_bounce = kmalloc_array(card->nr_ports,
1295 							 BUF_SIZE, GFP_KERNEL);
1296 			if (!card->dma_bounce) {
1297 				dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
1298 				err = -ENOMEM;
1299 				/* Fallback to MMIO doesn't work */
1300 				goto out_unmap_both;
1301 			}
1302 		}
1303 	} else {
1304 		card->using_dma = 0;
1305 		/* Set RX empty flag for all ports */
1306 		iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
1307 	}
1308 
1309 	pci_set_drvdata(dev, card);
1310 
1311 	tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
1312 	spin_lock_init(&card->tx_lock);
1313 	spin_lock_init(&card->tx_queue_lock);
1314 	spin_lock_init(&card->cli_queue_lock);
1315 	spin_lock_init(&card->param_queue_lock);
1316 	INIT_LIST_HEAD(&card->param_queue);
1317 
1318 	err = request_irq(dev->irq, solos_irq, IRQF_SHARED,
1319 			  "solos-pci", card);
1320 	if (err) {
1321 		dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
1322 		goto out_unmap_both;
1323 	}
1324 
1325 	iowrite32(1, card->config_regs + IRQ_EN_ADDR);
1326 
1327 	if (fpga_upgrade)
1328 		flash_upgrade(card, 0);
1329 
1330 	if (firmware_upgrade)
1331 		flash_upgrade(card, 1);
1332 
1333 	if (db_fpga_upgrade)
1334 		flash_upgrade(card, 2);
1335 
1336 	if (db_firmware_upgrade)
1337 		flash_upgrade(card, 3);
1338 
1339 	err = atm_init(card, &dev->dev);
1340 	if (err)
1341 		goto out_free_irq;
1342 
1343 	if (card->fpga_version >= DMA_SUPPORTED &&
1344 	    sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
1345 		dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
1346 
1347 	return 0;
1348 
1349  out_free_irq:
1350 	iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1351 	free_irq(dev->irq, card);
1352 	tasklet_kill(&card->tlet);
1353 
1354  out_unmap_both:
1355 	kfree(card->dma_bounce);
1356 	pci_iounmap(dev, card->buffers);
1357  out_unmap_config:
1358 	pci_iounmap(dev, card->config_regs);
1359  out_release_regions:
1360 	pci_release_regions(dev);
1361  out:
1362 	kfree(card);
1363 	return err;
1364 }
1365 
1366 static int atm_init(struct solos_card *card, struct device *parent)
1367 {
1368 	int i;
1369 
1370 	for (i = 0; i < card->nr_ports; i++) {
1371 		struct sk_buff *skb;
1372 		struct pkt_hdr *header;
1373 
1374 		skb_queue_head_init(&card->tx_queue[i]);
1375 		skb_queue_head_init(&card->cli_queue[i]);
1376 
1377 		card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
1378 		if (!card->atmdev[i]) {
1379 			dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
1380 			atm_remove(card);
1381 			return -ENODEV;
1382 		}
1383 		if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
1384 			dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
1385 		if (sysfs_create_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group))
1386 			dev_err(&card->dev->dev, "Could not register parameter group for ATM device %d\n", i);
1387 
1388 		dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
1389 
1390 		card->atmdev[i]->ci_range.vpi_bits = 8;
1391 		card->atmdev[i]->ci_range.vci_bits = 16;
1392 		card->atmdev[i]->dev_data = card;
1393 		card->atmdev[i]->phy_data = (void *)(unsigned long)i;
1394 		atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND);
1395 
1396 		skb = alloc_skb(sizeof(*header), GFP_KERNEL);
1397 		if (!skb) {
1398 			dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n");
1399 			continue;
1400 		}
1401 
1402 		header = skb_put(skb, sizeof(*header));
1403 
1404 		header->size = cpu_to_le16(0);
1405 		header->vpi = cpu_to_le16(0);
1406 		header->vci = cpu_to_le16(0);
1407 		header->type = cpu_to_le16(PKT_STATUS);
1408 
1409 		fpga_queue(card, i, skb, NULL);
1410 	}
1411 	return 0;
1412 }
1413 
1414 static void atm_remove(struct solos_card *card)
1415 {
1416 	int i;
1417 
1418 	for (i = 0; i < card->nr_ports; i++) {
1419 		if (card->atmdev[i]) {
1420 			struct sk_buff *skb;
1421 
1422 			dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
1423 
1424 			sysfs_remove_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group);
1425 			atm_dev_deregister(card->atmdev[i]);
1426 
1427 			skb = card->rx_skb[i];
1428 			if (skb) {
1429 				dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
1430 						 RX_DMA_SIZE, DMA_FROM_DEVICE);
1431 				dev_kfree_skb(skb);
1432 			}
1433 			skb = card->tx_skb[i];
1434 			if (skb) {
1435 				dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
1436 						 skb->len, DMA_TO_DEVICE);
1437 				dev_kfree_skb(skb);
1438 			}
1439 			while ((skb = skb_dequeue(&card->tx_queue[i])))
1440 				dev_kfree_skb(skb);
1441 
1442 		}
1443 	}
1444 }
1445 
1446 static void fpga_remove(struct pci_dev *dev)
1447 {
1448 	struct solos_card *card = pci_get_drvdata(dev);
1449 
1450 	/* Disable IRQs */
1451 	iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1452 
1453 	/* Reset FPGA */
1454 	iowrite32(1, card->config_regs + FPGA_MODE);
1455 	(void)ioread32(card->config_regs + FPGA_MODE);
1456 
1457 	if (card->fpga_version >= DMA_SUPPORTED)
1458 		sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
1459 
1460 	atm_remove(card);
1461 
1462 	free_irq(dev->irq, card);
1463 	tasklet_kill(&card->tlet);
1464 
1465 	kfree(card->dma_bounce);
1466 
1467 	/* Release device from reset */
1468 	iowrite32(0, card->config_regs + FPGA_MODE);
1469 	(void)ioread32(card->config_regs + FPGA_MODE);
1470 
1471 	pci_iounmap(dev, card->buffers);
1472 	pci_iounmap(dev, card->config_regs);
1473 
1474 	pci_release_regions(dev);
1475 	pci_disable_device(dev);
1476 
1477 	kfree(card);
1478 }
1479 
1480 static const struct pci_device_id fpga_pci_tbl[] = {
1481 	{ 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1482 	{ 0, }
1483 };
1484 
1485 MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
1486 
1487 static struct pci_driver fpga_driver = {
1488 	.name =		"solos",
1489 	.id_table =	fpga_pci_tbl,
1490 	.probe =	fpga_probe,
1491 	.remove =	fpga_remove,
1492 };
1493 
1494 
1495 static int __init solos_pci_init(void)
1496 {
1497 	BUILD_BUG_ON(sizeof(struct solos_skb_cb) > sizeof(((struct sk_buff *)0)->cb));
1498 
1499 	printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
1500 	return pci_register_driver(&fpga_driver);
1501 }
1502 
1503 static void __exit solos_pci_exit(void)
1504 {
1505 	pci_unregister_driver(&fpga_driver);
1506 	printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
1507 }
1508 
1509 module_init(solos_pci_init);
1510 module_exit(solos_pci_exit);
1511