xref: /linux/drivers/ata/pata_parport/Kconfig (revision 919c119415c7b67056449f51374939d49189a326)

# SPDX-License-Identifier: GPL-2.0

comment "Parallel IDE protocol modules"
	depends on PATA_PARPORT

config PATA_PARPORT_ATEN
	tristate "ATEN EH-100 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the ATEN EH-100 parallel port IDE
	  protocol. This protocol is used in some inexpensive low performance
	  parallel port kits made in Hong Kong.

config PATA_PARPORT_BPCK
	tristate "MicroSolutions backpack (Series 5) protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the Micro Solutions BACKPACK
	  parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
	  before 1999 were Series 5) Series 5 drives will NOT always have the
	  Series noted on the bottom of the drive. Series 6 drivers will.

	  In other words, if your BACKPACK drive doesn't say "Series 6" on the
	  bottom, enable this option.

config PATA_PARPORT_BPCK6
	tristate "MicroSolutions backpack (Series 6) protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the Micro Solutions BACKPACK
	  parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
	  after 1999 were Series 6) Series 6 drives will have the Series noted
	  on the bottom of the drive.  Series 5 drivers don't always have it
	  noted.

	  In other words, if your BACKPACK drive says "Series 6" on the
	  bottom, enable this option.

config PATA_PARPORT_COMM
	tristate "DataStor Commuter protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the Commuter parallel port IDE
	  protocol from DataStor.

config PATA_PARPORT_DSTR
	tristate "DataStor EP-2000 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the EP-2000 parallel port IDE
	  protocol from DataStor

config PATA_PARPORT_FIT2
	tristate "FIT TD-2000 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the TD-2000 parallel port IDE
	  protocol from Fidelity International Technology. This is a simple
	  (low speed) adapter that is used in some portable hard drives.

config PATA_PARPORT_FIT3
	tristate "FIT TD-3000 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the TD-3000 parallel port IDE
	  protocol from Fidelity International Technology. This protocol is
	  used in newer models of their portable disk, CD-ROM and PD/CD
	  devices.

config PATA_PARPORT_EPAT
	tristate "Shuttle EPAT/EPEZ protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the EPAT parallel port IDE protocol.
	  EPAT is a parallel port IDE adapter manufactured by Shuttle
	  Technology and widely used in devices from major vendors such as
	  Hewlett-Packard, SyQuest, Imation and Avatar.

config PATA_PARPORT_EPATC8
	bool "Support c7/c8 chips"
	depends on PATA_PARPORT_EPAT
	help
	  This option enables support for the newer Shuttle EP1284 (aka c7 and
	  c8) chip. You need this if you are using any recent Imation SuperDisk
	  (LS-120) drive.

config PATA_PARPORT_EPIA
	tristate "Shuttle EPIA protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the (obsolete) EPIA parallel port
	  IDE protocol from Shuttle Technology. This adapter can still be
	  found in some no-name kits.

config PATA_PARPORT_FRIQ
	tristate "Freecom IQ ASIC-2 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for version 2 of the Freecom IQ parallel
	  port IDE adapter.  This adapter is used by the Maxell Superdisk
	  drive.

config PATA_PARPORT_FRPW
	tristate "FreeCom power protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the Freecom power parallel port IDE
	  protocol.

config PATA_PARPORT_KBIC
	tristate "KingByte KBIC-951A/971A protocols"
	depends on PATA_PARPORT
	help
	  This option enables support for the KBIC-951A and KBIC-971A parallel
	  port IDE protocols from KingByte Information Corp. KingByte's
	  adapters appear in many no-name portable disk and CD-ROM products,
	  especially in Europe.

config PATA_PARPORT_KTTI
	tristate "KT PHd protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the "PHd" parallel port IDE protocol
	  from KT Technology. This is a simple (low speed) adapter that is
	  used in some 2.5" portable hard drives.

config PATA_PARPORT_ON20
	tristate "OnSpec 90c20 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the (obsolete) 90c20 parallel port
	  IDE protocol from OnSpec (often marketed under the ValuStore brand
	  name).

config PATA_PARPORT_ON26
	tristate "OnSpec 90c26 protocol"
	depends on PATA_PARPORT
	help
	  This option enables support for the 90c26 parallel port IDE protocol
	  from OnSpec Electronics (often marketed under the ValuStore brand
	  name).