1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Libata based driver for Apple "macio" family of PATA controllers 4 * 5 * Copyright 2008/2009 Benjamin Herrenschmidt, IBM Corp 6 * <benh@kernel.crashing.org> 7 * 8 * Some bits and pieces from drivers/ide/ppc/pmac.c 9 * 10 */ 11 12 #undef DEBUG 13 #undef DEBUG_DMA 14 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/init.h> 18 #include <linux/blkdev.h> 19 #include <linux/ata.h> 20 #include <linux/libata.h> 21 #include <linux/adb.h> 22 #include <linux/pmu.h> 23 #include <linux/scatterlist.h> 24 #include <linux/irqdomain.h> 25 #include <linux/of.h> 26 #include <linux/gfp.h> 27 #include <linux/pci.h> 28 29 #include <scsi/scsi.h> 30 #include <scsi/scsi_host.h> 31 #include <scsi/scsi_device.h> 32 33 #include <asm/macio.h> 34 #include <asm/io.h> 35 #include <asm/dbdma.h> 36 #include <asm/machdep.h> 37 #include <asm/pmac_feature.h> 38 #include <asm/mediabay.h> 39 40 #ifdef DEBUG_DMA 41 #define dev_dbgdma(dev, format, arg...) \ 42 dev_printk(KERN_DEBUG , dev , format , ## arg) 43 #else 44 #define dev_dbgdma(dev, format, arg...) \ 45 ({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; }) 46 #endif 47 48 #define DRV_NAME "pata_macio" 49 #define DRV_VERSION "0.9" 50 51 /* Models of macio ATA controller */ 52 enum { 53 controller_ohare, /* OHare based */ 54 controller_heathrow, /* Heathrow/Paddington */ 55 controller_kl_ata3, /* KeyLargo ATA-3 */ 56 controller_kl_ata4, /* KeyLargo ATA-4 */ 57 controller_un_ata6, /* UniNorth2 ATA-6 */ 58 controller_k2_ata6, /* K2 ATA-6 */ 59 controller_sh_ata6, /* Shasta ATA-6 */ 60 }; 61 62 static const char* macio_ata_names[] = { 63 "OHare ATA", /* OHare based */ 64 "Heathrow ATA", /* Heathrow/Paddington */ 65 "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */ 66 "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */ 67 "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */ 68 "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */ 69 "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */ 70 }; 71 72 /* 73 * Extra registers, both 32-bit little-endian 74 */ 75 #define IDE_TIMING_CONFIG 0x200 76 #define IDE_INTERRUPT 0x300 77 78 /* Kauai (U2) ATA has different register setup */ 79 #define IDE_KAUAI_PIO_CONFIG 0x200 80 #define IDE_KAUAI_ULTRA_CONFIG 0x210 81 #define IDE_KAUAI_POLL_CONFIG 0x220 82 83 /* 84 * Timing configuration register definitions 85 */ 86 87 /* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */ 88 #define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS) 89 #define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS) 90 #define IDE_SYSCLK_NS 30 /* 33Mhz cell */ 91 #define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */ 92 93 /* 133Mhz cell, found in shasta. 94 * See comments about 100 Mhz Uninorth 2... 95 * Note that PIO_MASK and MDMA_MASK seem to overlap, that's just 96 * weird and I don't now why .. at this stage 97 */ 98 #define TR_133_PIOREG_PIO_MASK 0xff000fff 99 #define TR_133_PIOREG_MDMA_MASK 0x00fff800 100 #define TR_133_UDMAREG_UDMA_MASK 0x0003ffff 101 #define TR_133_UDMAREG_UDMA_EN 0x00000001 102 103 /* 100Mhz cell, found in Uninorth 2 and K2. It appears as a pci device 104 * (106b/0033) on uninorth or K2 internal PCI bus and it's clock is 105 * controlled like gem or fw. It appears to be an evolution of keylargo 106 * ATA4 with a timing register extended to 2x32bits registers (one 107 * for PIO & MWDMA and one for UDMA, and a similar DBDMA channel. 108 * It has it's own local feature control register as well. 109 * 110 * After scratching my mind over the timing values, at least for PIO 111 * and MDMA, I think I've figured the format of the timing register, 112 * though I use pre-calculated tables for UDMA as usual... 113 */ 114 #define TR_100_PIO_ADDRSETUP_MASK 0xff000000 /* Size of field unknown */ 115 #define TR_100_PIO_ADDRSETUP_SHIFT 24 116 #define TR_100_MDMA_MASK 0x00fff000 117 #define TR_100_MDMA_RECOVERY_MASK 0x00fc0000 118 #define TR_100_MDMA_RECOVERY_SHIFT 18 119 #define TR_100_MDMA_ACCESS_MASK 0x0003f000 120 #define TR_100_MDMA_ACCESS_SHIFT 12 121 #define TR_100_PIO_MASK 0xff000fff 122 #define TR_100_PIO_RECOVERY_MASK 0x00000fc0 123 #define TR_100_PIO_RECOVERY_SHIFT 6 124 #define TR_100_PIO_ACCESS_MASK 0x0000003f 125 #define TR_100_PIO_ACCESS_SHIFT 0 126 127 #define TR_100_UDMAREG_UDMA_MASK 0x0000ffff 128 #define TR_100_UDMAREG_UDMA_EN 0x00000001 129 130 131 /* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on 132 * 40 connector cable and to 4 on 80 connector one. 133 * Clock unit is 15ns (66Mhz) 134 * 135 * 3 Values can be programmed: 136 * - Write data setup, which appears to match the cycle time. They 137 * also call it DIOW setup. 138 * - Ready to pause time (from spec) 139 * - Address setup. That one is weird. I don't see where exactly 140 * it fits in UDMA cycles, I got it's name from an obscure piece 141 * of commented out code in Darwin. They leave it to 0, we do as 142 * well, despite a comment that would lead to think it has a 143 * min value of 45ns. 144 * Apple also add 60ns to the write data setup (or cycle time ?) on 145 * reads. 146 */ 147 #define TR_66_UDMA_MASK 0xfff00000 148 #define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */ 149 #define TR_66_PIO_ADDRSETUP_MASK 0xe0000000 /* Address setup */ 150 #define TR_66_PIO_ADDRSETUP_SHIFT 29 151 #define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */ 152 #define TR_66_UDMA_RDY2PAUS_SHIFT 25 153 #define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */ 154 #define TR_66_UDMA_WRDATASETUP_SHIFT 21 155 #define TR_66_MDMA_MASK 0x000ffc00 156 #define TR_66_MDMA_RECOVERY_MASK 0x000f8000 157 #define TR_66_MDMA_RECOVERY_SHIFT 15 158 #define TR_66_MDMA_ACCESS_MASK 0x00007c00 159 #define TR_66_MDMA_ACCESS_SHIFT 10 160 #define TR_66_PIO_MASK 0xe00003ff 161 #define TR_66_PIO_RECOVERY_MASK 0x000003e0 162 #define TR_66_PIO_RECOVERY_SHIFT 5 163 #define TR_66_PIO_ACCESS_MASK 0x0000001f 164 #define TR_66_PIO_ACCESS_SHIFT 0 165 166 /* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo 167 * Can do pio & mdma modes, clock unit is 30ns (33Mhz) 168 * 169 * The access time and recovery time can be programmed. Some older 170 * Darwin code base limit OHare to 150ns cycle time. I decided to do 171 * the same here fore safety against broken old hardware ;) 172 * The HalfTick bit, when set, adds half a clock (15ns) to the access 173 * time and removes one from recovery. It's not supported on KeyLargo 174 * implementation afaik. The E bit appears to be set for PIO mode 0 and 175 * is used to reach long timings used in this mode. 176 */ 177 #define TR_33_MDMA_MASK 0x003ff800 178 #define TR_33_MDMA_RECOVERY_MASK 0x001f0000 179 #define TR_33_MDMA_RECOVERY_SHIFT 16 180 #define TR_33_MDMA_ACCESS_MASK 0x0000f800 181 #define TR_33_MDMA_ACCESS_SHIFT 11 182 #define TR_33_MDMA_HALFTICK 0x00200000 183 #define TR_33_PIO_MASK 0x000007ff 184 #define TR_33_PIO_E 0x00000400 185 #define TR_33_PIO_RECOVERY_MASK 0x000003e0 186 #define TR_33_PIO_RECOVERY_SHIFT 5 187 #define TR_33_PIO_ACCESS_MASK 0x0000001f 188 #define TR_33_PIO_ACCESS_SHIFT 0 189 190 /* 191 * Interrupt register definitions. Only present on newer cells 192 * (Keylargo and later afaik) so we don't use it. 193 */ 194 #define IDE_INTR_DMA 0x80000000 195 #define IDE_INTR_DEVICE 0x40000000 196 197 /* 198 * FCR Register on Kauai. Not sure what bit 0x4 is ... 199 */ 200 #define KAUAI_FCR_UATA_MAGIC 0x00000004 201 #define KAUAI_FCR_UATA_RESET_N 0x00000002 202 #define KAUAI_FCR_UATA_ENABLE 0x00000001 203 204 205 /* Allow up to 256 DBDMA commands per xfer */ 206 #define MAX_DCMDS 256 207 208 /* Don't let a DMA segment go all the way to 64K */ 209 #define MAX_DBDMA_SEG 0xff00 210 211 212 /* 213 * Wait 1s for disk to answer on IDE bus after a hard reset 214 * of the device (via GPIO/FCR). 215 * 216 * Some devices seem to "pollute" the bus even after dropping 217 * the BSY bit (typically some combo drives slave on the UDMA 218 * bus) after a hard reset. Since we hard reset all drives on 219 * KeyLargo ATA66, we have to keep that delay around. I may end 220 * up not hard resetting anymore on these and keep the delay only 221 * for older interfaces instead (we have to reset when coming 222 * from MacOS...) --BenH. 223 */ 224 #define IDE_WAKEUP_DELAY_MS 1000 225 226 struct pata_macio_timing; 227 228 struct pata_macio_priv { 229 int kind; 230 int aapl_bus_id; 231 int mediabay : 1; 232 struct device_node *node; 233 struct macio_dev *mdev; 234 struct pci_dev *pdev; 235 struct device *dev; 236 int irq; 237 u32 treg[2][2]; 238 void __iomem *tfregs; 239 void __iomem *kauai_fcr; 240 struct dbdma_cmd * dma_table_cpu; 241 dma_addr_t dma_table_dma; 242 struct ata_host *host; 243 const struct pata_macio_timing *timings; 244 }; 245 246 /* Previous variants of this driver used to calculate timings 247 * for various variants of the chip and use tables for others. 248 * 249 * Not only was this confusing, but in addition, it isn't clear 250 * whether our calculation code was correct. It didn't entirely 251 * match the darwin code and whatever documentation I could find 252 * on these cells 253 * 254 * I decided to entirely rely on a table instead for this version 255 * of the driver. Also, because I don't really care about derated 256 * modes and really old HW other than making it work, I'm not going 257 * to calculate / snoop timing values for something else than the 258 * standard modes. 259 */ 260 struct pata_macio_timing { 261 int mode; 262 u32 reg1; /* Bits to set in first timing reg */ 263 u32 reg2; /* Bits to set in second timing reg */ 264 }; 265 266 static const struct pata_macio_timing pata_macio_ohare_timings[] = { 267 { XFER_PIO_0, 0x00000526, 0, }, 268 { XFER_PIO_1, 0x00000085, 0, }, 269 { XFER_PIO_2, 0x00000025, 0, }, 270 { XFER_PIO_3, 0x00000025, 0, }, 271 { XFER_PIO_4, 0x00000025, 0, }, 272 { XFER_MW_DMA_0, 0x00074000, 0, }, 273 { XFER_MW_DMA_1, 0x00221000, 0, }, 274 { XFER_MW_DMA_2, 0x00211000, 0, }, 275 { -1, 0, 0 } 276 }; 277 278 static const struct pata_macio_timing pata_macio_heathrow_timings[] = { 279 { XFER_PIO_0, 0x00000526, 0, }, 280 { XFER_PIO_1, 0x00000085, 0, }, 281 { XFER_PIO_2, 0x00000025, 0, }, 282 { XFER_PIO_3, 0x00000025, 0, }, 283 { XFER_PIO_4, 0x00000025, 0, }, 284 { XFER_MW_DMA_0, 0x00074000, 0, }, 285 { XFER_MW_DMA_1, 0x00221000, 0, }, 286 { XFER_MW_DMA_2, 0x00211000, 0, }, 287 { -1, 0, 0 } 288 }; 289 290 static const struct pata_macio_timing pata_macio_kl33_timings[] = { 291 { XFER_PIO_0, 0x00000526, 0, }, 292 { XFER_PIO_1, 0x00000085, 0, }, 293 { XFER_PIO_2, 0x00000025, 0, }, 294 { XFER_PIO_3, 0x00000025, 0, }, 295 { XFER_PIO_4, 0x00000025, 0, }, 296 { XFER_MW_DMA_0, 0x00084000, 0, }, 297 { XFER_MW_DMA_1, 0x00021800, 0, }, 298 { XFER_MW_DMA_2, 0x00011800, 0, }, 299 { -1, 0, 0 } 300 }; 301 302 static const struct pata_macio_timing pata_macio_kl66_timings[] = { 303 { XFER_PIO_0, 0x0000038c, 0, }, 304 { XFER_PIO_1, 0x0000020a, 0, }, 305 { XFER_PIO_2, 0x00000127, 0, }, 306 { XFER_PIO_3, 0x000000c6, 0, }, 307 { XFER_PIO_4, 0x00000065, 0, }, 308 { XFER_MW_DMA_0, 0x00084000, 0, }, 309 { XFER_MW_DMA_1, 0x00029800, 0, }, 310 { XFER_MW_DMA_2, 0x00019400, 0, }, 311 { XFER_UDMA_0, 0x19100000, 0, }, 312 { XFER_UDMA_1, 0x14d00000, 0, }, 313 { XFER_UDMA_2, 0x10900000, 0, }, 314 { XFER_UDMA_3, 0x0c700000, 0, }, 315 { XFER_UDMA_4, 0x0c500000, 0, }, 316 { -1, 0, 0 } 317 }; 318 319 static const struct pata_macio_timing pata_macio_kauai_timings[] = { 320 { XFER_PIO_0, 0x08000a92, 0, }, 321 { XFER_PIO_1, 0x0800060f, 0, }, 322 { XFER_PIO_2, 0x0800038b, 0, }, 323 { XFER_PIO_3, 0x05000249, 0, }, 324 { XFER_PIO_4, 0x04000148, 0, }, 325 { XFER_MW_DMA_0, 0x00618000, 0, }, 326 { XFER_MW_DMA_1, 0x00209000, 0, }, 327 { XFER_MW_DMA_2, 0x00148000, 0, }, 328 { XFER_UDMA_0, 0, 0x000070c1, }, 329 { XFER_UDMA_1, 0, 0x00005d81, }, 330 { XFER_UDMA_2, 0, 0x00004a61, }, 331 { XFER_UDMA_3, 0, 0x00003a51, }, 332 { XFER_UDMA_4, 0, 0x00002a31, }, 333 { XFER_UDMA_5, 0, 0x00002921, }, 334 { -1, 0, 0 } 335 }; 336 337 static const struct pata_macio_timing pata_macio_shasta_timings[] = { 338 { XFER_PIO_0, 0x0a000c97, 0, }, 339 { XFER_PIO_1, 0x07000712, 0, }, 340 { XFER_PIO_2, 0x040003cd, 0, }, 341 { XFER_PIO_3, 0x0500028b, 0, }, 342 { XFER_PIO_4, 0x0400010a, 0, }, 343 { XFER_MW_DMA_0, 0x00820800, 0, }, 344 { XFER_MW_DMA_1, 0x0028b000, 0, }, 345 { XFER_MW_DMA_2, 0x001ca000, 0, }, 346 { XFER_UDMA_0, 0, 0x00035901, }, 347 { XFER_UDMA_1, 0, 0x000348b1, }, 348 { XFER_UDMA_2, 0, 0x00033881, }, 349 { XFER_UDMA_3, 0, 0x00033861, }, 350 { XFER_UDMA_4, 0, 0x00033841, }, 351 { XFER_UDMA_5, 0, 0x00033031, }, 352 { XFER_UDMA_6, 0, 0x00033021, }, 353 { -1, 0, 0 } 354 }; 355 356 static const struct pata_macio_timing *pata_macio_find_timing( 357 struct pata_macio_priv *priv, 358 int mode) 359 { 360 int i; 361 362 for (i = 0; priv->timings[i].mode > 0; i++) { 363 if (priv->timings[i].mode == mode) 364 return &priv->timings[i]; 365 } 366 return NULL; 367 } 368 369 370 static void pata_macio_apply_timings(struct ata_port *ap, unsigned int device) 371 { 372 struct pata_macio_priv *priv = ap->private_data; 373 void __iomem *rbase = ap->ioaddr.cmd_addr; 374 375 if (priv->kind == controller_sh_ata6 || 376 priv->kind == controller_un_ata6 || 377 priv->kind == controller_k2_ata6) { 378 writel(priv->treg[device][0], rbase + IDE_KAUAI_PIO_CONFIG); 379 writel(priv->treg[device][1], rbase + IDE_KAUAI_ULTRA_CONFIG); 380 } else 381 writel(priv->treg[device][0], rbase + IDE_TIMING_CONFIG); 382 } 383 384 static void pata_macio_dev_select(struct ata_port *ap, unsigned int device) 385 { 386 ata_sff_dev_select(ap, device); 387 388 /* Apply timings */ 389 pata_macio_apply_timings(ap, device); 390 } 391 392 static void pata_macio_set_timings(struct ata_port *ap, 393 struct ata_device *adev) 394 { 395 struct pata_macio_priv *priv = ap->private_data; 396 const struct pata_macio_timing *t; 397 398 dev_dbg(priv->dev, "Set timings: DEV=%d,PIO=0x%x (%s),DMA=0x%x (%s)\n", 399 adev->devno, 400 adev->pio_mode, 401 ata_mode_string(ata_xfer_mode2mask(adev->pio_mode)), 402 adev->dma_mode, 403 ata_mode_string(ata_xfer_mode2mask(adev->dma_mode))); 404 405 /* First clear timings */ 406 priv->treg[adev->devno][0] = priv->treg[adev->devno][1] = 0; 407 408 /* Now get the PIO timings */ 409 t = pata_macio_find_timing(priv, adev->pio_mode); 410 if (t == NULL) { 411 dev_warn(priv->dev, "Invalid PIO timing requested: 0x%x\n", 412 adev->pio_mode); 413 t = pata_macio_find_timing(priv, XFER_PIO_0); 414 } 415 BUG_ON(t == NULL); 416 417 /* PIO timings only ever use the first treg */ 418 priv->treg[adev->devno][0] |= t->reg1; 419 420 /* Now get DMA timings */ 421 t = pata_macio_find_timing(priv, adev->dma_mode); 422 if (t == NULL || (t->reg1 == 0 && t->reg2 == 0)) { 423 dev_dbg(priv->dev, "DMA timing not set yet, using MW_DMA_0\n"); 424 t = pata_macio_find_timing(priv, XFER_MW_DMA_0); 425 } 426 BUG_ON(t == NULL); 427 428 /* DMA timings can use both tregs */ 429 priv->treg[adev->devno][0] |= t->reg1; 430 priv->treg[adev->devno][1] |= t->reg2; 431 432 dev_dbg(priv->dev, " -> %08x %08x\n", 433 priv->treg[adev->devno][0], 434 priv->treg[adev->devno][1]); 435 436 /* Apply to hardware */ 437 pata_macio_apply_timings(ap, adev->devno); 438 } 439 440 /* 441 * Blast some well known "safe" values to the timing registers at init or 442 * wakeup from sleep time, before we do real calculation 443 */ 444 static void pata_macio_default_timings(struct pata_macio_priv *priv) 445 { 446 unsigned int value, value2 = 0; 447 448 switch(priv->kind) { 449 case controller_sh_ata6: 450 value = 0x0a820c97; 451 value2 = 0x00033031; 452 break; 453 case controller_un_ata6: 454 case controller_k2_ata6: 455 value = 0x08618a92; 456 value2 = 0x00002921; 457 break; 458 case controller_kl_ata4: 459 value = 0x0008438c; 460 break; 461 case controller_kl_ata3: 462 value = 0x00084526; 463 break; 464 case controller_heathrow: 465 case controller_ohare: 466 default: 467 value = 0x00074526; 468 break; 469 } 470 priv->treg[0][0] = priv->treg[1][0] = value; 471 priv->treg[0][1] = priv->treg[1][1] = value2; 472 } 473 474 static int pata_macio_cable_detect(struct ata_port *ap) 475 { 476 struct pata_macio_priv *priv = ap->private_data; 477 478 /* Get cable type from device-tree */ 479 if (priv->kind == controller_kl_ata4 || 480 priv->kind == controller_un_ata6 || 481 priv->kind == controller_k2_ata6 || 482 priv->kind == controller_sh_ata6) { 483 const char* cable = of_get_property(priv->node, "cable-type", 484 NULL); 485 struct device_node *root = of_find_node_by_path("/"); 486 const char *model = of_get_property(root, "model", NULL); 487 488 of_node_put(root); 489 490 if (cable && !strncmp(cable, "80-", 3)) { 491 /* Some drives fail to detect 80c cable in PowerBook 492 * These machine use proprietary short IDE cable 493 * anyway 494 */ 495 if (!strncmp(model, "PowerBook", 9)) 496 return ATA_CBL_PATA40_SHORT; 497 else 498 return ATA_CBL_PATA80; 499 } 500 } 501 502 /* G5's seem to have incorrect cable type in device-tree. 503 * Let's assume they always have a 80 conductor cable, this seem to 504 * be always the case unless the user mucked around 505 */ 506 if (of_device_is_compatible(priv->node, "K2-UATA") || 507 of_device_is_compatible(priv->node, "shasta-ata")) 508 return ATA_CBL_PATA80; 509 510 /* Anything else is 40 connectors */ 511 return ATA_CBL_PATA40; 512 } 513 514 static enum ata_completion_errors pata_macio_qc_prep(struct ata_queued_cmd *qc) 515 { 516 unsigned int write = (qc->tf.flags & ATA_TFLAG_WRITE); 517 struct ata_port *ap = qc->ap; 518 struct pata_macio_priv *priv = ap->private_data; 519 struct scatterlist *sg; 520 struct dbdma_cmd *table; 521 unsigned int si, pi; 522 523 dev_dbgdma(priv->dev, "%s: qc %p flags %lx, write %d dev %d\n", 524 __func__, qc, qc->flags, write, qc->dev->devno); 525 526 if (!(qc->flags & ATA_QCFLAG_DMAMAP)) 527 return AC_ERR_OK; 528 529 table = (struct dbdma_cmd *) priv->dma_table_cpu; 530 531 pi = 0; 532 for_each_sg(qc->sg, sg, qc->n_elem, si) { 533 u32 addr, sg_len, len; 534 535 /* determine if physical DMA addr spans 64K boundary. 536 * Note h/w doesn't support 64-bit, so we unconditionally 537 * truncate dma_addr_t to u32. 538 */ 539 addr = (u32) sg_dma_address(sg); 540 sg_len = sg_dma_len(sg); 541 542 while (sg_len) { 543 /* table overflow should never happen */ 544 BUG_ON (pi++ >= MAX_DCMDS); 545 546 len = (sg_len < MAX_DBDMA_SEG) ? sg_len : MAX_DBDMA_SEG; 547 table->command = cpu_to_le16(write ? OUTPUT_MORE: INPUT_MORE); 548 table->req_count = cpu_to_le16(len); 549 table->phy_addr = cpu_to_le32(addr); 550 table->cmd_dep = 0; 551 table->xfer_status = 0; 552 table->res_count = 0; 553 addr += len; 554 sg_len -= len; 555 ++table; 556 } 557 } 558 559 /* Should never happen according to Tejun */ 560 BUG_ON(!pi); 561 562 /* Convert the last command to an input/output */ 563 table--; 564 table->command = cpu_to_le16(write ? OUTPUT_LAST: INPUT_LAST); 565 table++; 566 567 /* Add the stop command to the end of the list */ 568 memset(table, 0, sizeof(struct dbdma_cmd)); 569 table->command = cpu_to_le16(DBDMA_STOP); 570 571 dev_dbgdma(priv->dev, "%s: %d DMA list entries\n", __func__, pi); 572 573 return AC_ERR_OK; 574 } 575 576 577 static void pata_macio_freeze(struct ata_port *ap) 578 { 579 struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; 580 581 if (dma_regs) { 582 unsigned int timeout = 1000000; 583 584 /* Make sure DMA controller is stopped */ 585 writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma_regs->control); 586 while (--timeout && (readl(&dma_regs->status) & RUN)) 587 udelay(1); 588 } 589 590 ata_sff_freeze(ap); 591 } 592 593 594 static void pata_macio_bmdma_setup(struct ata_queued_cmd *qc) 595 { 596 struct ata_port *ap = qc->ap; 597 struct pata_macio_priv *priv = ap->private_data; 598 struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; 599 int dev = qc->dev->devno; 600 601 dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc); 602 603 /* Make sure DMA commands updates are visible */ 604 writel(priv->dma_table_dma, &dma_regs->cmdptr); 605 606 /* On KeyLargo 66Mhz cell, we need to add 60ns to wrDataSetup on 607 * UDMA reads 608 */ 609 if (priv->kind == controller_kl_ata4 && 610 (priv->treg[dev][0] & TR_66_UDMA_EN)) { 611 void __iomem *rbase = ap->ioaddr.cmd_addr; 612 u32 reg = priv->treg[dev][0]; 613 614 if (!(qc->tf.flags & ATA_TFLAG_WRITE)) 615 reg += 0x00800000; 616 writel(reg, rbase + IDE_TIMING_CONFIG); 617 } 618 619 /* issue r/w command */ 620 ap->ops->sff_exec_command(ap, &qc->tf); 621 } 622 623 static void pata_macio_bmdma_start(struct ata_queued_cmd *qc) 624 { 625 struct ata_port *ap = qc->ap; 626 struct pata_macio_priv *priv = ap->private_data; 627 struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; 628 629 dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc); 630 631 writel((RUN << 16) | RUN, &dma_regs->control); 632 /* Make sure it gets to the controller right now */ 633 (void)readl(&dma_regs->control); 634 } 635 636 static void pata_macio_bmdma_stop(struct ata_queued_cmd *qc) 637 { 638 struct ata_port *ap = qc->ap; 639 struct pata_macio_priv *priv = ap->private_data; 640 struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; 641 unsigned int timeout = 1000000; 642 643 dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc); 644 645 /* Stop the DMA engine and wait for it to full halt */ 646 writel (((RUN|WAKE|DEAD) << 16), &dma_regs->control); 647 while (--timeout && (readl(&dma_regs->status) & RUN)) 648 udelay(1); 649 } 650 651 static u8 pata_macio_bmdma_status(struct ata_port *ap) 652 { 653 struct pata_macio_priv *priv = ap->private_data; 654 struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; 655 u32 dstat, rstat = ATA_DMA_INTR; 656 unsigned long timeout = 0; 657 658 dstat = readl(&dma_regs->status); 659 660 dev_dbgdma(priv->dev, "%s: dstat=%x\n", __func__, dstat); 661 662 /* We have two things to deal with here: 663 * 664 * - The dbdma won't stop if the command was started 665 * but completed with an error without transferring all 666 * datas. This happens when bad blocks are met during 667 * a multi-block transfer. 668 * 669 * - The dbdma fifo hasn't yet finished flushing to 670 * system memory when the disk interrupt occurs. 671 */ 672 673 /* First check for errors */ 674 if ((dstat & (RUN|DEAD)) != RUN) 675 rstat |= ATA_DMA_ERR; 676 677 /* If ACTIVE is cleared, the STOP command has been hit and 678 * the transfer is complete. If not, we have to flush the 679 * channel. 680 */ 681 if ((dstat & ACTIVE) == 0) 682 return rstat; 683 684 dev_dbgdma(priv->dev, "%s: DMA still active, flushing...\n", __func__); 685 686 /* If dbdma didn't execute the STOP command yet, the 687 * active bit is still set. We consider that we aren't 688 * sharing interrupts (which is hopefully the case with 689 * those controllers) and so we just try to flush the 690 * channel for pending data in the fifo 691 */ 692 udelay(1); 693 writel((FLUSH << 16) | FLUSH, &dma_regs->control); 694 for (;;) { 695 udelay(1); 696 dstat = readl(&dma_regs->status); 697 if ((dstat & FLUSH) == 0) 698 break; 699 if (++timeout > 1000) { 700 dev_warn(priv->dev, "timeout flushing DMA\n"); 701 rstat |= ATA_DMA_ERR; 702 break; 703 } 704 } 705 return rstat; 706 } 707 708 /* port_start is when we allocate the DMA command list */ 709 static int pata_macio_port_start(struct ata_port *ap) 710 { 711 struct pata_macio_priv *priv = ap->private_data; 712 713 if (ap->ioaddr.bmdma_addr == NULL) 714 return 0; 715 716 /* Allocate space for the DBDMA commands. 717 * 718 * The +2 is +1 for the stop command and +1 to allow for 719 * aligning the start address to a multiple of 16 bytes. 720 */ 721 priv->dma_table_cpu = 722 dmam_alloc_coherent(priv->dev, 723 (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd), 724 &priv->dma_table_dma, GFP_KERNEL); 725 if (priv->dma_table_cpu == NULL) { 726 dev_err(priv->dev, "Unable to allocate DMA command list\n"); 727 ap->ioaddr.bmdma_addr = NULL; 728 ap->mwdma_mask = 0; 729 ap->udma_mask = 0; 730 } 731 return 0; 732 } 733 734 static void pata_macio_irq_clear(struct ata_port *ap) 735 { 736 struct pata_macio_priv *priv = ap->private_data; 737 738 /* Nothing to do here */ 739 740 dev_dbgdma(priv->dev, "%s\n", __func__); 741 } 742 743 static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume) 744 { 745 dev_dbg(priv->dev, "Enabling & resetting... \n"); 746 747 if (priv->mediabay) 748 return; 749 750 if (priv->kind == controller_ohare && !resume) { 751 /* The code below is having trouble on some ohare machines 752 * (timing related ?). Until I can put my hand on one of these 753 * units, I keep the old way 754 */ 755 ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, 0, 1); 756 } else { 757 int rc; 758 759 /* Reset and enable controller */ 760 rc = ppc_md.feature_call(PMAC_FTR_IDE_RESET, 761 priv->node, priv->aapl_bus_id, 1); 762 ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, 763 priv->node, priv->aapl_bus_id, 1); 764 msleep(10); 765 /* Only bother waiting if there's a reset control */ 766 if (rc == 0) { 767 ppc_md.feature_call(PMAC_FTR_IDE_RESET, 768 priv->node, priv->aapl_bus_id, 0); 769 msleep(IDE_WAKEUP_DELAY_MS); 770 } 771 } 772 773 /* If resuming a PCI device, restore the config space here */ 774 if (priv->pdev && resume) { 775 int rc; 776 777 pci_restore_state(priv->pdev); 778 rc = pcim_enable_device(priv->pdev); 779 if (rc) 780 dev_err(&priv->pdev->dev, 781 "Failed to enable device after resume (%d)\n", 782 rc); 783 else 784 pci_set_master(priv->pdev); 785 } 786 787 /* On Kauai, initialize the FCR. We don't perform a reset, doesn't really 788 * seem necessary and speeds up the boot process 789 */ 790 if (priv->kauai_fcr) 791 writel(KAUAI_FCR_UATA_MAGIC | 792 KAUAI_FCR_UATA_RESET_N | 793 KAUAI_FCR_UATA_ENABLE, priv->kauai_fcr); 794 } 795 796 /* Hook the standard slave config to fixup some HW related alignment 797 * restrictions 798 */ 799 static int pata_macio_slave_config(struct scsi_device *sdev) 800 { 801 struct ata_port *ap = ata_shost_to_port(sdev->host); 802 struct pata_macio_priv *priv = ap->private_data; 803 struct ata_device *dev; 804 u16 cmd; 805 int rc; 806 807 /* First call original */ 808 rc = ata_scsi_slave_config(sdev); 809 if (rc) 810 return rc; 811 812 /* This is lifted from sata_nv */ 813 dev = &ap->link.device[sdev->id]; 814 815 /* OHare has issues with non cache aligned DMA on some chipsets */ 816 if (priv->kind == controller_ohare) { 817 blk_queue_update_dma_alignment(sdev->request_queue, 31); 818 blk_queue_update_dma_pad(sdev->request_queue, 31); 819 820 /* Tell the world about it */ 821 ata_dev_info(dev, "OHare alignment limits applied\n"); 822 return 0; 823 } 824 825 /* We only have issues with ATAPI */ 826 if (dev->class != ATA_DEV_ATAPI) 827 return 0; 828 829 /* Shasta and K2 seem to have "issues" with reads ... */ 830 if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) { 831 /* Allright these are bad, apply restrictions */ 832 blk_queue_update_dma_alignment(sdev->request_queue, 15); 833 blk_queue_update_dma_pad(sdev->request_queue, 15); 834 835 /* We enable MWI and hack cache line size directly here, this 836 * is specific to this chipset and not normal values, we happen 837 * to somewhat know what we are doing here (which is basically 838 * to do the same Apple does and pray they did not get it wrong :-) 839 */ 840 BUG_ON(!priv->pdev); 841 pci_write_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, 0x08); 842 pci_read_config_word(priv->pdev, PCI_COMMAND, &cmd); 843 pci_write_config_word(priv->pdev, PCI_COMMAND, 844 cmd | PCI_COMMAND_INVALIDATE); 845 846 /* Tell the world about it */ 847 ata_dev_info(dev, "K2/Shasta alignment limits applied\n"); 848 } 849 850 return 0; 851 } 852 853 #ifdef CONFIG_PM_SLEEP 854 static int pata_macio_do_suspend(struct pata_macio_priv *priv, pm_message_t mesg) 855 { 856 /* First, core libata suspend to do most of the work */ 857 ata_host_suspend(priv->host, mesg); 858 859 /* Restore to default timings */ 860 pata_macio_default_timings(priv); 861 862 /* Mask interrupt. Not strictly necessary but old driver did 863 * it and I'd rather not change that here */ 864 disable_irq(priv->irq); 865 866 /* The media bay will handle itself just fine */ 867 if (priv->mediabay) 868 return 0; 869 870 /* Kauai has bus control FCRs directly here */ 871 if (priv->kauai_fcr) { 872 u32 fcr = readl(priv->kauai_fcr); 873 fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE); 874 writel(fcr, priv->kauai_fcr); 875 } 876 877 /* For PCI, save state and disable DMA. No need to call 878 * pci_set_power_state(), the HW doesn't do D states that 879 * way, the platform code will take care of suspending the 880 * ASIC properly 881 */ 882 if (priv->pdev) { 883 pci_save_state(priv->pdev); 884 pci_disable_device(priv->pdev); 885 } 886 887 /* Disable the bus on older machines and the cell on kauai */ 888 ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, 889 priv->aapl_bus_id, 0); 890 891 return 0; 892 } 893 894 static int pata_macio_do_resume(struct pata_macio_priv *priv) 895 { 896 /* Reset and re-enable the HW */ 897 pata_macio_reset_hw(priv, 1); 898 899 /* Sanitize drive timings */ 900 pata_macio_apply_timings(priv->host->ports[0], 0); 901 902 /* We want our IRQ back ! */ 903 enable_irq(priv->irq); 904 905 /* Let the libata core take it from there */ 906 ata_host_resume(priv->host); 907 908 return 0; 909 } 910 #endif /* CONFIG_PM_SLEEP */ 911 912 static const struct scsi_host_template pata_macio_sht = { 913 __ATA_BASE_SHT(DRV_NAME), 914 .sg_tablesize = MAX_DCMDS, 915 /* We may not need that strict one */ 916 .dma_boundary = ATA_DMA_BOUNDARY, 917 /* Not sure what the real max is but we know it's less than 64K, let's 918 * use 64K minus 256 919 */ 920 .max_segment_size = MAX_DBDMA_SEG, 921 .slave_configure = pata_macio_slave_config, 922 .sdev_groups = ata_common_sdev_groups, 923 .can_queue = ATA_DEF_QUEUE, 924 .tag_alloc_policy = BLK_TAG_ALLOC_RR, 925 }; 926 927 static struct ata_port_operations pata_macio_ops = { 928 .inherits = &ata_bmdma_port_ops, 929 930 .freeze = pata_macio_freeze, 931 .set_piomode = pata_macio_set_timings, 932 .set_dmamode = pata_macio_set_timings, 933 .cable_detect = pata_macio_cable_detect, 934 .sff_dev_select = pata_macio_dev_select, 935 .qc_prep = pata_macio_qc_prep, 936 .bmdma_setup = pata_macio_bmdma_setup, 937 .bmdma_start = pata_macio_bmdma_start, 938 .bmdma_stop = pata_macio_bmdma_stop, 939 .bmdma_status = pata_macio_bmdma_status, 940 .port_start = pata_macio_port_start, 941 .sff_irq_clear = pata_macio_irq_clear, 942 }; 943 944 static void pata_macio_invariants(struct pata_macio_priv *priv) 945 { 946 const int *bidp; 947 948 /* Identify the type of controller */ 949 if (of_device_is_compatible(priv->node, "shasta-ata")) { 950 priv->kind = controller_sh_ata6; 951 priv->timings = pata_macio_shasta_timings; 952 } else if (of_device_is_compatible(priv->node, "kauai-ata")) { 953 priv->kind = controller_un_ata6; 954 priv->timings = pata_macio_kauai_timings; 955 } else if (of_device_is_compatible(priv->node, "K2-UATA")) { 956 priv->kind = controller_k2_ata6; 957 priv->timings = pata_macio_kauai_timings; 958 } else if (of_device_is_compatible(priv->node, "keylargo-ata")) { 959 if (of_node_name_eq(priv->node, "ata-4")) { 960 priv->kind = controller_kl_ata4; 961 priv->timings = pata_macio_kl66_timings; 962 } else { 963 priv->kind = controller_kl_ata3; 964 priv->timings = pata_macio_kl33_timings; 965 } 966 } else if (of_device_is_compatible(priv->node, "heathrow-ata")) { 967 priv->kind = controller_heathrow; 968 priv->timings = pata_macio_heathrow_timings; 969 } else { 970 priv->kind = controller_ohare; 971 priv->timings = pata_macio_ohare_timings; 972 } 973 974 /* XXX FIXME --- setup priv->mediabay here */ 975 976 /* Get Apple bus ID (for clock and ASIC control) */ 977 bidp = of_get_property(priv->node, "AAPL,bus-id", NULL); 978 priv->aapl_bus_id = bidp ? *bidp : 0; 979 980 /* Fixup missing Apple bus ID in case of media-bay */ 981 if (priv->mediabay && !bidp) 982 priv->aapl_bus_id = 1; 983 } 984 985 static void pata_macio_setup_ios(struct ata_ioports *ioaddr, 986 void __iomem * base, void __iomem * dma) 987 { 988 /* cmd_addr is the base of regs for that port */ 989 ioaddr->cmd_addr = base; 990 991 /* taskfile registers */ 992 ioaddr->data_addr = base + (ATA_REG_DATA << 4); 993 ioaddr->error_addr = base + (ATA_REG_ERR << 4); 994 ioaddr->feature_addr = base + (ATA_REG_FEATURE << 4); 995 ioaddr->nsect_addr = base + (ATA_REG_NSECT << 4); 996 ioaddr->lbal_addr = base + (ATA_REG_LBAL << 4); 997 ioaddr->lbam_addr = base + (ATA_REG_LBAM << 4); 998 ioaddr->lbah_addr = base + (ATA_REG_LBAH << 4); 999 ioaddr->device_addr = base + (ATA_REG_DEVICE << 4); 1000 ioaddr->status_addr = base + (ATA_REG_STATUS << 4); 1001 ioaddr->command_addr = base + (ATA_REG_CMD << 4); 1002 ioaddr->altstatus_addr = base + 0x160; 1003 ioaddr->ctl_addr = base + 0x160; 1004 ioaddr->bmdma_addr = dma; 1005 } 1006 1007 static void pmac_macio_calc_timing_masks(struct pata_macio_priv *priv, 1008 struct ata_port_info *pinfo) 1009 { 1010 int i = 0; 1011 1012 pinfo->pio_mask = 0; 1013 pinfo->mwdma_mask = 0; 1014 pinfo->udma_mask = 0; 1015 1016 while (priv->timings[i].mode > 0) { 1017 unsigned int mask = 1U << (priv->timings[i].mode & 0x0f); 1018 switch(priv->timings[i].mode & 0xf0) { 1019 case 0x00: /* PIO */ 1020 pinfo->pio_mask |= (mask >> 8); 1021 break; 1022 case 0x20: /* MWDMA */ 1023 pinfo->mwdma_mask |= mask; 1024 break; 1025 case 0x40: /* UDMA */ 1026 pinfo->udma_mask |= mask; 1027 break; 1028 } 1029 i++; 1030 } 1031 dev_dbg(priv->dev, "Supported masks: PIO=%x, MWDMA=%x, UDMA=%x\n", 1032 pinfo->pio_mask, pinfo->mwdma_mask, pinfo->udma_mask); 1033 } 1034 1035 static int pata_macio_common_init(struct pata_macio_priv *priv, 1036 resource_size_t tfregs, 1037 resource_size_t dmaregs, 1038 resource_size_t fcregs, 1039 unsigned long irq) 1040 { 1041 struct ata_port_info pinfo; 1042 const struct ata_port_info *ppi[] = { &pinfo, NULL }; 1043 void __iomem *dma_regs = NULL; 1044 1045 /* Fill up privates with various invariants collected from the 1046 * device-tree 1047 */ 1048 pata_macio_invariants(priv); 1049 1050 /* Make sure we have sane initial timings in the cache */ 1051 pata_macio_default_timings(priv); 1052 1053 /* Allocate libata host for 1 port */ 1054 memset(&pinfo, 0, sizeof(struct ata_port_info)); 1055 pmac_macio_calc_timing_masks(priv, &pinfo); 1056 pinfo.flags = ATA_FLAG_SLAVE_POSS; 1057 pinfo.port_ops = &pata_macio_ops; 1058 pinfo.private_data = priv; 1059 1060 priv->host = ata_host_alloc_pinfo(priv->dev, ppi, 1); 1061 if (priv->host == NULL) { 1062 dev_err(priv->dev, "Failed to allocate ATA port structure\n"); 1063 return -ENOMEM; 1064 } 1065 1066 /* Setup the private data in host too */ 1067 priv->host->private_data = priv; 1068 1069 /* Map base registers */ 1070 priv->tfregs = devm_ioremap(priv->dev, tfregs, 0x100); 1071 if (priv->tfregs == NULL) { 1072 dev_err(priv->dev, "Failed to map ATA ports\n"); 1073 return -ENOMEM; 1074 } 1075 priv->host->iomap = &priv->tfregs; 1076 1077 /* Map DMA regs */ 1078 if (dmaregs != 0) { 1079 dma_regs = devm_ioremap(priv->dev, dmaregs, 1080 sizeof(struct dbdma_regs)); 1081 if (dma_regs == NULL) 1082 dev_warn(priv->dev, "Failed to map ATA DMA registers\n"); 1083 } 1084 1085 /* If chip has local feature control, map those regs too */ 1086 if (fcregs != 0) { 1087 priv->kauai_fcr = devm_ioremap(priv->dev, fcregs, 4); 1088 if (priv->kauai_fcr == NULL) { 1089 dev_err(priv->dev, "Failed to map ATA FCR register\n"); 1090 return -ENOMEM; 1091 } 1092 } 1093 1094 /* Setup port data structure */ 1095 pata_macio_setup_ios(&priv->host->ports[0]->ioaddr, 1096 priv->tfregs, dma_regs); 1097 priv->host->ports[0]->private_data = priv; 1098 1099 /* hard-reset the controller */ 1100 pata_macio_reset_hw(priv, 0); 1101 pata_macio_apply_timings(priv->host->ports[0], 0); 1102 1103 /* Enable bus master if necessary */ 1104 if (priv->pdev && dma_regs) 1105 pci_set_master(priv->pdev); 1106 1107 dev_info(priv->dev, "Activating pata-macio chipset %s, Apple bus ID %d\n", 1108 macio_ata_names[priv->kind], priv->aapl_bus_id); 1109 1110 /* Start it up */ 1111 priv->irq = irq; 1112 return ata_host_activate(priv->host, irq, ata_bmdma_interrupt, 0, 1113 &pata_macio_sht); 1114 } 1115 1116 static int pata_macio_attach(struct macio_dev *mdev, 1117 const struct of_device_id *match) 1118 { 1119 struct pata_macio_priv *priv; 1120 resource_size_t tfregs, dmaregs = 0; 1121 unsigned long irq; 1122 int rc; 1123 1124 /* Check for broken device-trees */ 1125 if (macio_resource_count(mdev) == 0) { 1126 dev_err(&mdev->ofdev.dev, 1127 "No addresses for controller\n"); 1128 return -ENXIO; 1129 } 1130 1131 /* Enable managed resources */ 1132 macio_enable_devres(mdev); 1133 1134 /* Allocate and init private data structure */ 1135 priv = devm_kzalloc(&mdev->ofdev.dev, 1136 sizeof(struct pata_macio_priv), GFP_KERNEL); 1137 if (!priv) 1138 return -ENOMEM; 1139 1140 priv->node = of_node_get(mdev->ofdev.dev.of_node); 1141 priv->mdev = mdev; 1142 priv->dev = &mdev->ofdev.dev; 1143 1144 /* Request memory resource for taskfile registers */ 1145 if (macio_request_resource(mdev, 0, "pata-macio")) { 1146 dev_err(&mdev->ofdev.dev, 1147 "Cannot obtain taskfile resource\n"); 1148 return -EBUSY; 1149 } 1150 tfregs = macio_resource_start(mdev, 0); 1151 1152 /* Request resources for DMA registers if any */ 1153 if (macio_resource_count(mdev) >= 2) { 1154 if (macio_request_resource(mdev, 1, "pata-macio-dma")) 1155 dev_err(&mdev->ofdev.dev, 1156 "Cannot obtain DMA resource\n"); 1157 else 1158 dmaregs = macio_resource_start(mdev, 1); 1159 } 1160 1161 /* 1162 * Fixup missing IRQ for some old implementations with broken 1163 * device-trees. 1164 * 1165 * This is a bit bogus, it should be fixed in the device-tree itself, 1166 * via the existing macio fixups, based on the type of interrupt 1167 * controller in the machine. However, I have no test HW for this case, 1168 * and this trick works well enough on those old machines... 1169 */ 1170 if (macio_irq_count(mdev) == 0) { 1171 dev_warn(&mdev->ofdev.dev, 1172 "No interrupts for controller, using 13\n"); 1173 irq = irq_create_mapping(NULL, 13); 1174 } else 1175 irq = macio_irq(mdev, 0); 1176 1177 /* Prevvent media bay callbacks until fully registered */ 1178 lock_media_bay(priv->mdev->media_bay); 1179 1180 /* Get register addresses and call common initialization */ 1181 rc = pata_macio_common_init(priv, 1182 tfregs, /* Taskfile regs */ 1183 dmaregs, /* DBDMA regs */ 1184 0, /* Feature control */ 1185 irq); 1186 unlock_media_bay(priv->mdev->media_bay); 1187 1188 return rc; 1189 } 1190 1191 static void pata_macio_detach(struct macio_dev *mdev) 1192 { 1193 struct ata_host *host = macio_get_drvdata(mdev); 1194 struct pata_macio_priv *priv = host->private_data; 1195 1196 lock_media_bay(priv->mdev->media_bay); 1197 1198 /* Make sure the mediabay callback doesn't try to access 1199 * dead stuff 1200 */ 1201 priv->host->private_data = NULL; 1202 1203 ata_host_detach(host); 1204 1205 unlock_media_bay(priv->mdev->media_bay); 1206 } 1207 1208 #ifdef CONFIG_PM_SLEEP 1209 static int pata_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) 1210 { 1211 struct ata_host *host = macio_get_drvdata(mdev); 1212 1213 return pata_macio_do_suspend(host->private_data, mesg); 1214 } 1215 1216 static int pata_macio_resume(struct macio_dev *mdev) 1217 { 1218 struct ata_host *host = macio_get_drvdata(mdev); 1219 1220 return pata_macio_do_resume(host->private_data); 1221 } 1222 #endif /* CONFIG_PM_SLEEP */ 1223 1224 #ifdef CONFIG_PMAC_MEDIABAY 1225 static void pata_macio_mb_event(struct macio_dev* mdev, int mb_state) 1226 { 1227 struct ata_host *host = macio_get_drvdata(mdev); 1228 struct ata_port *ap; 1229 struct ata_eh_info *ehi; 1230 struct ata_device *dev; 1231 unsigned long flags; 1232 1233 if (!host || !host->private_data) 1234 return; 1235 ap = host->ports[0]; 1236 spin_lock_irqsave(ap->lock, flags); 1237 ehi = &ap->link.eh_info; 1238 if (mb_state == MB_CD) { 1239 ata_ehi_push_desc(ehi, "mediabay plug"); 1240 ata_ehi_hotplugged(ehi); 1241 ata_port_freeze(ap); 1242 } else { 1243 ata_ehi_push_desc(ehi, "mediabay unplug"); 1244 ata_for_each_dev(dev, &ap->link, ALL) 1245 dev->flags |= ATA_DFLAG_DETACH; 1246 ata_port_abort(ap); 1247 } 1248 spin_unlock_irqrestore(ap->lock, flags); 1249 1250 } 1251 #endif /* CONFIG_PMAC_MEDIABAY */ 1252 1253 1254 static int pata_macio_pci_attach(struct pci_dev *pdev, 1255 const struct pci_device_id *id) 1256 { 1257 struct pata_macio_priv *priv; 1258 struct device_node *np; 1259 resource_size_t rbase; 1260 1261 /* We cannot use a MacIO controller without its OF device node */ 1262 np = pci_device_to_OF_node(pdev); 1263 if (np == NULL) { 1264 dev_err(&pdev->dev, 1265 "Cannot find OF device node for controller\n"); 1266 return -ENODEV; 1267 } 1268 1269 /* Check that it can be enabled */ 1270 if (pcim_enable_device(pdev)) { 1271 dev_err(&pdev->dev, 1272 "Cannot enable controller PCI device\n"); 1273 return -ENXIO; 1274 } 1275 1276 /* Allocate and init private data structure */ 1277 priv = devm_kzalloc(&pdev->dev, 1278 sizeof(struct pata_macio_priv), GFP_KERNEL); 1279 if (!priv) 1280 return -ENOMEM; 1281 1282 priv->node = of_node_get(np); 1283 priv->pdev = pdev; 1284 priv->dev = &pdev->dev; 1285 1286 /* Get MMIO regions */ 1287 if (pci_request_regions(pdev, "pata-macio")) { 1288 dev_err(&pdev->dev, 1289 "Cannot obtain PCI resources\n"); 1290 return -EBUSY; 1291 } 1292 1293 /* Get register addresses and call common initialization */ 1294 rbase = pci_resource_start(pdev, 0); 1295 if (pata_macio_common_init(priv, 1296 rbase + 0x2000, /* Taskfile regs */ 1297 rbase + 0x1000, /* DBDMA regs */ 1298 rbase, /* Feature control */ 1299 pdev->irq)) 1300 return -ENXIO; 1301 1302 return 0; 1303 } 1304 1305 static void pata_macio_pci_detach(struct pci_dev *pdev) 1306 { 1307 struct ata_host *host = pci_get_drvdata(pdev); 1308 1309 ata_host_detach(host); 1310 } 1311 1312 #ifdef CONFIG_PM_SLEEP 1313 static int pata_macio_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) 1314 { 1315 struct ata_host *host = pci_get_drvdata(pdev); 1316 1317 return pata_macio_do_suspend(host->private_data, mesg); 1318 } 1319 1320 static int pata_macio_pci_resume(struct pci_dev *pdev) 1321 { 1322 struct ata_host *host = pci_get_drvdata(pdev); 1323 1324 return pata_macio_do_resume(host->private_data); 1325 } 1326 #endif /* CONFIG_PM_SLEEP */ 1327 1328 static const struct of_device_id pata_macio_match[] = 1329 { 1330 { .name = "IDE", }, 1331 { .name = "ATA", }, 1332 { .type = "ide", }, 1333 { .type = "ata", }, 1334 { /* sentinel */ } 1335 }; 1336 MODULE_DEVICE_TABLE(of, pata_macio_match); 1337 1338 static struct macio_driver pata_macio_driver = 1339 { 1340 .driver = { 1341 .name = "pata-macio", 1342 .owner = THIS_MODULE, 1343 .of_match_table = pata_macio_match, 1344 }, 1345 .probe = pata_macio_attach, 1346 .remove = pata_macio_detach, 1347 #ifdef CONFIG_PM_SLEEP 1348 .suspend = pata_macio_suspend, 1349 .resume = pata_macio_resume, 1350 #endif 1351 #ifdef CONFIG_PMAC_MEDIABAY 1352 .mediabay_event = pata_macio_mb_event, 1353 #endif 1354 }; 1355 1356 static const struct pci_device_id pata_macio_pci_match[] = { 1357 { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 }, 1358 { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 }, 1359 { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 }, 1360 { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 }, 1361 { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 }, 1362 {}, 1363 }; 1364 1365 static struct pci_driver pata_macio_pci_driver = { 1366 .name = "pata-pci-macio", 1367 .id_table = pata_macio_pci_match, 1368 .probe = pata_macio_pci_attach, 1369 .remove = pata_macio_pci_detach, 1370 #ifdef CONFIG_PM_SLEEP 1371 .suspend = pata_macio_pci_suspend, 1372 .resume = pata_macio_pci_resume, 1373 #endif 1374 .driver = { 1375 .owner = THIS_MODULE, 1376 }, 1377 }; 1378 MODULE_DEVICE_TABLE(pci, pata_macio_pci_match); 1379 1380 1381 static int __init pata_macio_init(void) 1382 { 1383 int rc; 1384 1385 if (!machine_is(powermac)) 1386 return -ENODEV; 1387 1388 rc = pci_register_driver(&pata_macio_pci_driver); 1389 if (rc) 1390 return rc; 1391 rc = macio_register_driver(&pata_macio_driver); 1392 if (rc) { 1393 pci_unregister_driver(&pata_macio_pci_driver); 1394 return rc; 1395 } 1396 return 0; 1397 } 1398 1399 static void __exit pata_macio_exit(void) 1400 { 1401 macio_unregister_driver(&pata_macio_driver); 1402 pci_unregister_driver(&pata_macio_pci_driver); 1403 } 1404 1405 module_init(pata_macio_init); 1406 module_exit(pata_macio_exit); 1407 1408 MODULE_AUTHOR("Benjamin Herrenschmidt"); 1409 MODULE_DESCRIPTION("Apple MacIO PATA driver"); 1410 MODULE_LICENSE("GPL"); 1411 MODULE_VERSION(DRV_VERSION); 1412