1 /* 2 * pata_cmd640.c - CMD640 PCI PATA for new ATA layer 3 * (C) 2007 Red Hat Inc 4 * Alan Cox <alan@redhat.com> 5 * 6 * Based upon 7 * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 8 * 9 * Copyright (C) 1995-1996 Linus Torvalds & authors (see driver) 10 * 11 * This drives only the PCI version of the controller. If you have a 12 * VLB one then we have enough docs to support it but you can write 13 * your own code. 14 */ 15 16 #include <linux/kernel.h> 17 #include <linux/module.h> 18 #include <linux/pci.h> 19 #include <linux/init.h> 20 #include <linux/blkdev.h> 21 #include <linux/delay.h> 22 #include <scsi/scsi_host.h> 23 #include <linux/libata.h> 24 25 #define DRV_NAME "pata_cmd640" 26 #define DRV_VERSION "0.0.5" 27 28 struct cmd640_reg { 29 int last; 30 u8 reg58[ATA_MAX_DEVICES]; 31 }; 32 33 enum { 34 CFR = 0x50, 35 CNTRL = 0x51, 36 CMDTIM = 0x52, 37 ARTIM0 = 0x53, 38 DRWTIM0 = 0x54, 39 ARTIM23 = 0x57, 40 DRWTIM23 = 0x58, 41 BRST = 0x59 42 }; 43 44 /** 45 * cmd640_set_piomode - set initial PIO mode data 46 * @ap: ATA port 47 * @adev: ATA device 48 * 49 * Called to do the PIO mode setup. 50 */ 51 52 static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev) 53 { 54 struct cmd640_reg *timing = ap->private_data; 55 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 56 struct ata_timing t; 57 const unsigned long T = 1000000 / 33; 58 const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; 59 u8 reg; 60 int arttim = ARTIM0 + 2 * adev->devno; 61 struct ata_device *pair = ata_dev_pair(adev); 62 63 if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) { 64 printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); 65 return; 66 } 67 68 /* The second channel has shared timings and the setup timing is 69 messy to switch to merge it for worst case */ 70 if (ap->port_no && pair) { 71 struct ata_timing p; 72 ata_timing_compute(pair, pair->pio_mode, &p, T, 1); 73 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP); 74 } 75 76 /* Make the timings fit */ 77 if (t.recover > 16) { 78 t.active += t.recover - 16; 79 t.recover = 16; 80 } 81 if (t.active > 16) 82 t.active = 16; 83 84 /* Now convert the clocks into values we can actually stuff into 85 the chip */ 86 87 if (t.recover > 1) 88 t.recover--; /* 640B only */ 89 else 90 t.recover = 15; 91 92 if (t.setup > 4) 93 t.setup = 0xC0; 94 else 95 t.setup = setup_data[t.setup]; 96 97 if (ap->port_no == 0) { 98 t.active &= 0x0F; /* 0 = 16 */ 99 100 /* Load setup timing */ 101 pci_read_config_byte(pdev, arttim, ®); 102 reg &= 0x3F; 103 reg |= t.setup; 104 pci_write_config_byte(pdev, arttim, reg); 105 106 /* Load active/recovery */ 107 pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover); 108 } else { 109 /* Save the shared timings for channel, they will be loaded 110 by qc_issue_prot. Reloading the setup time is expensive 111 so we keep a merged one loaded */ 112 pci_read_config_byte(pdev, ARTIM23, ®); 113 reg &= 0x3F; 114 reg |= t.setup; 115 pci_write_config_byte(pdev, ARTIM23, reg); 116 timing->reg58[adev->devno] = (t.active << 4) | t.recover; 117 } 118 } 119 120 121 /** 122 * cmd640_qc_issue_prot - command preparation hook 123 * @qc: Command to be issued 124 * 125 * Channel 1 has shared timings. We must reprogram the 126 * clock each drive 2/3 switch we do. 127 */ 128 129 static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc) 130 { 131 struct ata_port *ap = qc->ap; 132 struct ata_device *adev = qc->dev; 133 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 134 struct cmd640_reg *timing = ap->private_data; 135 136 if (ap->port_no != 0 && adev->devno != timing->last) { 137 pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]); 138 timing->last = adev->devno; 139 } 140 return ata_qc_issue_prot(qc); 141 } 142 143 /** 144 * cmd640_port_start - port setup 145 * @ap: ATA port being set up 146 * 147 * The CMD640 needs to maintain private data structures so we 148 * allocate space here. 149 */ 150 151 static int cmd640_port_start(struct ata_port *ap) 152 { 153 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 154 struct cmd640_reg *timing; 155 156 int ret = ata_port_start(ap); 157 if (ret < 0) 158 return ret; 159 160 timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL); 161 if (timing == NULL) 162 return -ENOMEM; 163 timing->last = -1; /* Force a load */ 164 ap->private_data = timing; 165 return ret; 166 } 167 168 static struct scsi_host_template cmd640_sht = { 169 .module = THIS_MODULE, 170 .name = DRV_NAME, 171 .ioctl = ata_scsi_ioctl, 172 .queuecommand = ata_scsi_queuecmd, 173 .can_queue = ATA_DEF_QUEUE, 174 .this_id = ATA_SHT_THIS_ID, 175 .sg_tablesize = LIBATA_MAX_PRD, 176 .cmd_per_lun = ATA_SHT_CMD_PER_LUN, 177 .emulated = ATA_SHT_EMULATED, 178 .use_clustering = ATA_SHT_USE_CLUSTERING, 179 .proc_name = DRV_NAME, 180 .dma_boundary = ATA_DMA_BOUNDARY, 181 .slave_configure = ata_scsi_slave_config, 182 .slave_destroy = ata_scsi_slave_destroy, 183 .bios_param = ata_std_bios_param, 184 #ifdef CONFIG_PM 185 .resume = ata_scsi_device_resume, 186 .suspend = ata_scsi_device_suspend, 187 #endif 188 }; 189 190 static struct ata_port_operations cmd640_port_ops = { 191 .port_disable = ata_port_disable, 192 .set_piomode = cmd640_set_piomode, 193 .mode_filter = ata_pci_default_filter, 194 .tf_load = ata_tf_load, 195 .tf_read = ata_tf_read, 196 .check_status = ata_check_status, 197 .exec_command = ata_exec_command, 198 .dev_select = ata_std_dev_select, 199 200 .freeze = ata_bmdma_freeze, 201 .thaw = ata_bmdma_thaw, 202 .error_handler = ata_bmdma_error_handler, 203 .post_internal_cmd = ata_bmdma_post_internal_cmd, 204 .cable_detect = ata_cable_40wire, 205 206 .bmdma_setup = ata_bmdma_setup, 207 .bmdma_start = ata_bmdma_start, 208 .bmdma_stop = ata_bmdma_stop, 209 .bmdma_status = ata_bmdma_status, 210 211 .qc_prep = ata_qc_prep, 212 .qc_issue = cmd640_qc_issue_prot, 213 214 /* In theory this is not needed once we kill the prefetcher */ 215 .data_xfer = ata_data_xfer_noirq, 216 217 .irq_handler = ata_interrupt, 218 .irq_clear = ata_bmdma_irq_clear, 219 .irq_on = ata_irq_on, 220 .irq_ack = ata_irq_ack, 221 222 .port_start = cmd640_port_start, 223 }; 224 225 static void cmd640_hardware_init(struct pci_dev *pdev) 226 { 227 u8 r; 228 u8 ctrl; 229 230 /* CMD640 detected, commiserations */ 231 pci_write_config_byte(pdev, 0x5B, 0x00); 232 /* Get version info */ 233 pci_read_config_byte(pdev, CFR, &r); 234 /* PIO0 command cycles */ 235 pci_write_config_byte(pdev, CMDTIM, 0); 236 /* 512 byte bursts (sector) */ 237 pci_write_config_byte(pdev, BRST, 0x40); 238 /* 239 * A reporter a long time ago 240 * Had problems with the data fifo 241 * So don't run the risk 242 * Of putting crap on the disk 243 * For its better just to go slow 244 */ 245 /* Do channel 0 */ 246 pci_read_config_byte(pdev, CNTRL, &ctrl); 247 pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0); 248 /* Ditto for channel 1 */ 249 pci_read_config_byte(pdev, ARTIM23, &ctrl); 250 ctrl |= 0x0C; 251 pci_write_config_byte(pdev, ARTIM23, ctrl); 252 } 253 254 static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) 255 { 256 static struct ata_port_info info = { 257 .sht = &cmd640_sht, 258 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, 259 .pio_mask = 0x1f, 260 .port_ops = &cmd640_port_ops 261 }; 262 263 static struct ata_port_info *port_info[2] = { &info, &info }; 264 265 cmd640_hardware_init(pdev); 266 return ata_pci_init_one(pdev, port_info, 2); 267 } 268 269 static int cmd640_reinit_one(struct pci_dev *pdev) 270 { 271 cmd640_hardware_init(pdev); 272 #ifdef CONFIG_PM 273 return ata_pci_device_resume(pdev); 274 #else 275 return 0; 276 #endif 277 } 278 279 static const struct pci_device_id cmd640[] = { 280 { PCI_VDEVICE(CMD, 0x640), 0 }, 281 { }, 282 }; 283 284 static struct pci_driver cmd640_pci_driver = { 285 .name = DRV_NAME, 286 .id_table = cmd640, 287 .probe = cmd640_init_one, 288 .remove = ata_pci_remove_one, 289 #ifdef CONFIG_PM 290 .suspend = ata_pci_device_suspend, 291 #endif 292 .resume = cmd640_reinit_one, 293 }; 294 295 static int __init cmd640_init(void) 296 { 297 return pci_register_driver(&cmd640_pci_driver); 298 } 299 300 static void __exit cmd640_exit(void) 301 { 302 pci_unregister_driver(&cmd640_pci_driver); 303 } 304 305 MODULE_AUTHOR("Alan Cox"); 306 MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers"); 307 MODULE_LICENSE("GPL"); 308 MODULE_DEVICE_TABLE(pci, cmd640); 309 MODULE_VERSION(DRV_VERSION); 310 311 module_init(cmd640_init); 312 module_exit(cmd640_exit); 313